Linux USB
 help / color / mirror / Atom feed
* [PATCH v4 0/2] usb: cdns3: support configurations without DRD block
@ 2026-05-12 11:44 Pawel Laszczak via B4 Relay
  2026-05-12 11:44 ` [PATCH v4 1/2] dt-bindings: usb: cdns3: Add no_drd property Pawel Laszczak via B4 Relay
  2026-05-12 11:44 ` [PATCH v4 2/2] usb: cdnsp: Add support for device-only configuration Pawel Laszczak via B4 Relay
  0 siblings, 2 replies; 4+ messages in thread
From: Pawel Laszczak via B4 Relay @ 2026-05-12 11:44 UTC (permalink / raw)
  To: Peter Chen, Roger Quadros, Greg Kroah-Hartman, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley
  Cc: linux-usb, devicetree, linux-kernel, Pawel Laszczak,
	Bjorn Helgaas

usb: cdns3: support configurations without DRD block

This series adds support for Cadence USBSSP controllers in hardware
layouts where the Dual-Role Device (DRD) register block is either
missing or inaccessible.

In such configurations, the controller is hardwired to a single role
(either host or device) and the driver must skip all OTG/DRD register
accesses to avoid bus errors or incorrect role detection.

The solution introduces a new 'no_drd' property that can be passed
via DT or software nodes. When set, the driver:
1. Skips DRD register mapping and IRQ requests.
2. Uses a different BAR indexing logic for PCI-based configurations
   (32-bit addressing layout).
3. Hardwires the role based on 'dr_mode'.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
---
Note: This series is based on current linux-next. I am aware of Peter
Chen's recent refactoring series ("usb: cdns3: plat: Expose platform
core driver as library"). Although there is a minor conflict in
cdns3-plat.c, Peter has already provided an Acked-by for this version.
I am happy to provide a rebased v5 as soon as Peter's changes land in
linux-next if required.
---
v4:
  - Added DT binding documentation for the 'no_drd' property.
  - Relaxed 'reg' and 'interrupts' requirements in the DT schema (minItems 2)
    to allow configurations where the OTG/DRD register block is missing,
  - Moved PCI_DEVICE_ID_CDNS_UDC_USBSSP from pci_ids.h to cdnsp-pci.c
    to keep the global PCI ID list clean.

v3:
  - Improved descriptions and comments for better clarity.
  - Introduced the 'no_drd' property to indicate missing DRD register block.
  - Added support for fixed host-only and device-only configurations.
  - Ensured cdns_otg_disable_irq is called only when no_drd is false.
  - Updated cdns_drd_gadget_on/off to ensure PHY mode is correctly
    handled even if DRD is disabled.

v2:
  - Changed otg_irq to be optionali.
  - Added cdns->no_drd check in cdns_power_is_lost.
  - Added cdns->no_drd check in cdns_get_id.

---
Pawel Laszczak (2):
      dt-bindings: usb: cdns3: Add no_drd property
      usb: cdnsp: Add support for device-only configuration

 .../devicetree/bindings/usb/cdns,usb3.yaml         | 13 +++++-
 drivers/usb/cdns3/cdns3-plat.c                     | 26 +++++++-----
 drivers/usb/cdns3/cdnsp-pci.c                      | 47 +++++++++++++++++-----
 drivers/usb/cdns3/core.c                           |  3 +-
 drivers/usb/cdns3/core.h                           |  4 ++
 drivers/usb/cdns3/drd.c                            | 44 +++++++++++++++++++-
 6 files changed, 112 insertions(+), 25 deletions(-)
---
base-commit: e98d21c170b01ddef366f023bbfcf6b31509fa83
change-id: 20260512-b4-no_drd_config-f530f1f16d8a

Best regards,
--  
Pawel Laszczak <pawell@cadence.com>



^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2026-05-12 17:10 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-05-12 11:44 [PATCH v4 0/2] usb: cdns3: support configurations without DRD block Pawel Laszczak via B4 Relay
2026-05-12 11:44 ` [PATCH v4 1/2] dt-bindings: usb: cdns3: Add no_drd property Pawel Laszczak via B4 Relay
2026-05-12 17:10   ` Conor Dooley
2026-05-12 11:44 ` [PATCH v4 2/2] usb: cdnsp: Add support for device-only configuration Pawel Laszczak via B4 Relay

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox