[PATCH] arm64: dts: qcom: lemans: Enable eud support

[PATCH] arm64: dts: qcom: lemans: Enable eud support

[Akash Kumar]

Add the EUD controller node in lemans.dtsi and update the USB HS
endpoint routing on lemans-evk to pass through EUD instead of linking
the connector directly to usb_0_dwc3_hs.

Wire the OF graph endpoints between the connector, EUD and DWC3 HS
controller to enable the EUD path on lemans EVK.

This change is part of series "Improve Qualcomm EUD driver and
platform support" and has been validated on the Qualcomm Dragonwing platform
(RB8 board), confirming successful OpenOCD connectivity to the EUD
interface. For detailed usage instructions, refer to Qualcomm’s Linux
kernel debugging guide:
https://docs.qualcomm.com/bundle/publicresource/topics/80-70020-12/debugging_linux_kernel.html#debug-using-openocd

Signed-off-by: Akash Kumar <akakum@qti.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-evk.dts | 12 ++++++++++--
 arch/arm64/boot/dts/qcom/lemans.dtsi    | 26 +++++++++++++++++++++++++
 2 files changed, 36 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index c665db6a4595..96d316867c0e 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -55,7 +55,7 @@ port@0 {
 				reg = <0>;
 
 				usb0_con_hs_ep: endpoint {
-					remote-endpoint = <&usb_0_dwc3_hs>;
+					remote-endpoint = <&eud_con>;
 				};
 			};
 
@@ -510,6 +510,14 @@ queue3 {
 	};
 };
 
+&eud_ep {
+	remote-endpoint = <&usb_0_dwc3_hs>;
+};
+
+&eud_con {
+	remote-endpoint = <&usb0_con_hs_ep>;
+};
+
 &gpi_dma0 {
 	status = "okay";
 };
@@ -985,7 +993,7 @@ &usb_0 {
 };
 
 &usb_0_dwc3_hs {
-	remote-endpoint = <&usb0_con_hs_ep>;
+	remote-endpoint = <&eud_ep>;
 };
 
 &usb_0_dwc3_ss {
diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index fe6e76351823..a8ab11681476 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -4003,6 +4003,32 @@ opp-384000000 {
 			};
 		};
 
+		eud: eud@88e1000 {
+			compatible = "qcom,sc7280-eud", "qcom,eud";
+			reg = <0 0x88e1000 0 0x2000>,
+				<0 0x88e3000 0 0x1000>;
+			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+			port@0 {
+					reg = <0>;
+
+					eud_ep: endpoint {
+					};
+			};
+
+				port@1 {
+					reg = <1>;
+
+					eud_con: endpoint {
+					};
+				};
+			};
+		};
+
 		usb_0_hsphy: phy@88e4000 {
 			compatible = "qcom,sa8775p-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
-- 
2.43.0

base-commit: https://lore.kernel.org/all/20260501170635.2641748-1-elson.serrao@oss.qualcomm.com/
change-id: Improve Qualcomm EUD driver and platform support