Linux USB
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Sebastian EM <mendozayt13@gmail.com>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org
Subject: Re: [PATCH] usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling
Date: Tue, 12 May 2026 16:32:51 +0200	[thread overview]
Message-ID: <2026051237-delicacy-gallon-268c@gregkh> (raw)
In-Reply-To: <CAD89HyCWaa8esENsCip3foXe7c8x34HRx=37+c4MwnTpCbN1oQ@mail.gmail.com>

On Tue, May 12, 2026 at 09:12:14AM -0500, Sebastian EM wrote:
> The WebUSB GET_URL handler in composite_setup() narrows
> landing_page_length to fit the host-supplied wLength using
> 
> landing_page_length = w_length
> - WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
> 
> If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
> unsigned subtraction wraps, and the subsequent
> 
> memcpy(url_descriptor->URL,
>       cdev->landing_page + landing_page_offset,
>       landing_page_length - landing_page_offset);
> 
> ends up copying close to UINT_MAX bytes from cdev->landing_page into
> cdev->req->buf.  KASAN reports a slab-out-of-bounds in composite_setup
> on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
> memcpy as a 4294967293-byte field-spanning write into
> url_descriptor->URL (size 252).
> 
> A USB host can reach this from a single SETUP packet against any
> gadget that has webusb/use=1 and a landingPage configured.
> 
> Handle the small-wLength case before the math: when the host requested
> fewer bytes than the URL descriptor header, only the header is
> meaningful and no URL bytes need to be copied.  Setting
> landing_page_length to landing_page_offset makes the existing memcpy a
> no-op and leaves the descriptor returned to the host unchanged for all
> larger wLength values.
> 
> Fixes: 93c473948c58 ("usb: gadget: add WebUSB landing page support")
> Cc: stable@vger.kernel.org
> Signed-off-by: Jeremy Erazo <mendozayt13@gmail.com>
> ---
> v2:
> - Drop the self Reported-by tag.
> - Add Fixes tag.
> - Cc stable.
> 
>  drivers/usb/gadget/composite.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
> index a902184bd..dc3664374 100644
> --- a/drivers/usb/gadget/composite.c
> +++ b/drivers/usb/gadget/composite.c
> @@ -2172,7 +2172,10 @@ composite_setup(struct usb_gadget *gadget, const
> struct usb_ctrlrequest *ctrl)
>   sizeof(url_descriptor->URL)
>   - WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset);
> 
> - if (w_length < WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_length)
> + if (w_length < WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH)
> + landing_page_length = landing_page_offset;
> + else if (w_length <
> + WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_length)
>   landing_page_length = w_length
>   - WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
> 
> -- 
> 2.53.0
> 
> El mar, 12 may 2026 a las 8:29, Greg Kroah-Hartman (<
> gregkh@linuxfoundation.org>) escribió:
> 
> > On Tue, May 12, 2026 at 06:18:54AM -0500, Sebastian EM wrote:
> > > Hi Greg,
> > >
> > > Thanks for the review.
> > >
> > > You are right; the self Reported-by tag does not belong there, so I
> > dropped
> > > it in v2.
> > >
> > > The introducing commit is:
> > >
> > > 93c473948c58 ("usb: gadget: add WebUSB landing page support")
> > >
> > > I also added:
> > >
> > > Cc: stable@vger.kernel.org
> > >
> > > since the issue was introduced with the WebUSB GET_URL handling path and
> > > the fix is a small bounds/underflow fix suitable for stable kernels.
> > >
> > > v2 is attached as a plain patch:
> > >
> > >
> > 0001-v2-usb-gadget-composite-fix-integer-underflow-in-WebUSB-GET_URL-handling.patch
> >
> > We can't take patches as attachments, just send this as a normal v2
> > patch.
> >
> > thanks,
> >
> > greg k-h
> >

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- Your patch is malformed (tabs converted to spaces, linewrapped, etc.)
  and can not be applied.  Please read the file,
  Documentation/process/email-clients.rst in order to fix this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot

  parent reply	other threads:[~2026-05-12 14:38 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-12  1:43 [PATCH] usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling Jeremy Erazo
2026-05-12  5:39 ` Greg Kroah-Hartman
2026-05-12 11:18   ` Sebastian EM
2026-05-12 13:29     ` Greg Kroah-Hartman
     [not found]       ` <CAD89HyCWaa8esENsCip3foXe7c8x34HRx=37+c4MwnTpCbN1oQ@mail.gmail.com>
2026-05-12 14:32         ` Greg Kroah-Hartman [this message]
2026-05-12 15:38           ` [PATCH v2] " Jeremy Erazo
2026-05-12 15:48             ` Greg Kroah-Hartman
2026-05-12 16:05               ` [PATCH v3] " Jeremy Erazo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2026051237-delicacy-gallon-268c@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mendozayt13@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox