[PATCH 7/8] usb: typec: ucsi: displayport: NAK DP_CMD_CONFIGURE without a payload VDO

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

ucsi_displayport_vdm() handles a DP_CMD_CONFIGURE by copying the first
payload VDO from data[], but unlike the equivalent handler in
altmodes/displayport.c it does not check that count covers a VDO beyond
the header.  A header-only Configure VDM (count == 1) would read one u32
past the caller's array.

In the normal UCSI path the caller controls count, so this is hardening
for non-standard delivery paths.  NAK and bail when no configuration VDO
is present, matching the generic DP altmode driver's existing guard.

Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Pooja Katiyar <pooja.katiyar@intel.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/ucsi/displayport.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c
index 8aae80b457d7..67a0991a7b76 100644
--- a/drivers/usb/typec/ucsi/displayport.c
+++ b/drivers/usb/typec/ucsi/displayport.c
@@ -240,6 +240,10 @@ static int ucsi_displayport_vdm(struct typec_altmode *alt,
 				dp->header |= VDO_CMDT(CMDT_RSP_ACK);
 			break;
 		case DP_CMD_CONFIGURE:
+			if (count < 2) {
+				dp->header |= VDO_CMDT(CMDT_RSP_NAK);
+				break;
+			}
 			dp->data.conf = *data;
 			if (ucsi_displayport_configure(dp)) {
 				dp->header |= VDO_CMDT(CMDT_RSP_NAK);
-- 
2.54.0