Linux USB
 help / color / mirror / Atom feed
From: Benson Leung <bleung@google.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Benson Leung <bleung@chromium.org>,
	Jameson Thies <jthies@google.com>,
	Nathan Rebello <nathan.c.rebello@gmail.com>,
	Johan Hovold <johan@kernel.org>,
	Pooja Katiyar <pooja.katiyar@intel.com>,
	Hsin-Te Yuan <yuanhsinte@chromium.org>,
	Abel Vesa <abelvesa@kernel.org>, stable <stable@kernel.org>
Subject: Re: [PATCH 8/8] usb: typec: ucsi: validate connector number in ucsi_connector_change()
Date: Wed, 13 May 2026 16:03:22 +0000	[thread overview]
Message-ID: <agSgyp6X1N_LQMd5@google.com> (raw)
In-Reply-To: <2026051351-truck-steadfast-df48@gregkh>

[-- Attachment #1: Type: text/plain, Size: 2280 bytes --]

On Wed, May 13, 2026 at 05:52:55PM +0200, Greg Kroah-Hartman wrote:
> The connector number in a UCSI CCI notification is a 7-bit field
> supplied by the PPM.  ucsi_connector_change() uses it to index the
> ucsi->connector[] array without checking it against the number of
> connectors the PPM reported at init time, so a buggy or malicious PPM
> (EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 /
> glink transports) can drive schedule_work() on memory past the end of
> the array.
> 
> Reject connector numbers that are zero or exceed cap.num_connectors
> before dereferencing the array.
> 
> Assisted-by: gkh_clanker_t1000
> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Cc: Benson Leung <bleung@chromium.org>
> Cc: Jameson Thies <jthies@google.com>
> Cc: Nathan Rebello <nathan.c.rebello@gmail.com>
> Cc: Johan Hovold <johan@kernel.org>
> Cc: Pooja Katiyar <pooja.katiyar@intel.com>
> Cc: Hsin-Te Yuan <yuanhsinte@chromium.org>
> Cc: Abel Vesa <abelvesa@kernel.org>
> Cc: stable <stable@kernel.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


Reviewed-by: Benson Leung <bleung@chromium.org>


> ---
>  drivers/usb/typec/ucsi/ucsi.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
> index 5b7ad9e99cb9..539dc706798d 100644
> --- a/drivers/usb/typec/ucsi/ucsi.c
> +++ b/drivers/usb/typec/ucsi/ucsi.c
> @@ -1380,13 +1380,22 @@ static void ucsi_handle_connector_change(struct work_struct *work)
>   */
>  void ucsi_connector_change(struct ucsi *ucsi, u8 num)
>  {
> -	struct ucsi_connector *con = &ucsi->connector[num - 1];
> +	struct ucsi_connector *con;
>  
>  	if (!(ucsi->ntfy & UCSI_ENABLE_NTFY_CONNECTOR_CHANGE)) {
>  		dev_dbg(ucsi->dev, "Early connector change event\n");
>  		return;
>  	}
>  
> +	if (!num || num > ucsi->cap.num_connectors) {
> +		dev_warn_ratelimited(ucsi->dev,
> +				     "Bogus connector change on %u (max %u)\n",
> +				     num, ucsi->cap.num_connectors);
> +		return;
> +	}
> +
> +	con = &ucsi->connector[num - 1];
> +
>  	if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags))
>  		schedule_work(&con->work);
>  }
> -- 
> 2.54.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2026-05-13 16:03 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-13 15:52 [PATCH 1/8] usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer() Greg Kroah-Hartman
2026-05-13 15:52 ` [PATCH 2/8] usb: typec: altmodes/displayport: validate count before reading Status Update VDO Greg Kroah-Hartman
2026-05-13 15:52 ` [PATCH 3/8] usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT Greg Kroah-Hartman
2026-05-13 15:52 ` [PATCH 4/8] usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers Greg Kroah-Hartman
2026-05-13 15:52 ` [PATCH 5/8] usb: typec: tcpm: validate VDO count before reading Attention status VDO Greg Kroah-Hartman
2026-05-13 15:52 ` [PATCH 6/8] usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes() Greg Kroah-Hartman
2026-05-13 15:52 ` [PATCH 7/8] usb: typec: ucsi: displayport: NAK DP_CMD_CONFIGURE without a payload VDO Greg Kroah-Hartman
2026-05-13 15:52 ` [PATCH 8/8] usb: typec: ucsi: validate connector number in ucsi_connector_change() Greg Kroah-Hartman
2026-05-13 16:03   ` Benson Leung [this message]
2026-05-13 16:13   ` Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=agSgyp6X1N_LQMd5@google.com \
    --to=bleung@google.com \
    --cc=abelvesa@kernel.org \
    --cc=bleung@chromium.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=johan@kernel.org \
    --cc=jthies@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nathan.c.rebello@gmail.com \
    --cc=pooja.katiyar@intel.com \
    --cc=stable@kernel.org \
    --cc=yuanhsinte@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox