[PATCH] USB: serial: safe_serial: fix memory corruption with small endpoint

[PATCH] USB: serial: safe_serial: fix memory corruption with small endpoint

[Johan Hovold]

Make sure that the bulk-out buffer size is at least eight bytes to avoid
user-controlled slab corruption in "safe" mode should a malicious device
report a smaller size.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/safe_serial.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 238b54993446..d267a31dcccf 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -259,6 +259,7 @@ static int safe_prepare_write_buffer(struct usb_serial_port *port,
 static int safe_startup(struct usb_serial *serial)
 {
 	struct usb_interface_descriptor	*desc;
+	int bulk_out_size;
 
 	if (serial->dev->descriptor.bDeviceClass != CDC_DEVICE_CLASS)
 		return -ENODEV;
@@ -279,6 +280,16 @@ static int safe_startup(struct usb_serial *serial)
 	default:
 		return -EINVAL;
 	}
+
+	/*
+	 * The bulk-out buffer needs to be large enough for the two-byte
+	 * trailer in safe mode, but assume anything smaller than eight bytes
+	 * is broken.
+	 */
+	bulk_out_size = serial->port[0]->bulk_out_size;
+	if (bulk_out_size > 0 && bulk_out_size < 8)
+		return -EINVAL;
+
 	return 0;
 }
 
-- 
2.53.0