[PATCH v2 0/2] PM: hibernate: skip UVC resume after snapshot

[PATCH v2 0/2] PM: hibernate: skip UVC resume after snapshot

[Haowen Tu]

During hibernation, after the memory snapshot has been created, the
kernel briefly resumes devices with PMSG_THAW to write the snapshot to
storage before powering off.  USB driver resume callbacks do not receive
the hibernation PM message, so uvcvideo cannot distinguish this transient
image-write phase from the final restore path.

This series adds pm_hibernation_snapshot_done() and uses it in uvcvideo
to avoid reinitializing the camera during the image-write phase.

This is not intended to make every leaf driver special-case hibernation
THAW.  A generic USB-core skip would not be safe because some USB
interfaces may be part of the storage path, or otherwise be required by
dependencies during image writeout.  The helper is an opt-in mechanism
for drivers with a concrete reason to avoid reinitializing hardware in
this transient phase.  In this case, uvcvideo has a user-visible side
effect, the camera indicator LED, while the camera is not part of the
image writeout path.

Changes in v2:
- Rename pm_hibernation_storing_image() to
  pm_hibernation_snapshot_done().
- Clear in_suspend before releasing snapshot memory on the hibernation
  failure paths and after swsusp_write() returns.
- Update the uvcvideo call site for the new helper name.

Haowen Tu (2):
  PM: hibernate: add pm_hibernation_snapshot_done() helper
  media: uvcvideo: skip resume after hibernation snapshot

 drivers/media/usb/uvc/uvc_video.c | 12 ++++++++++++
 include/linux/suspend.h           |  2 ++
 kernel/power/hibernate.c          | 31 +++++++++++++++++++++++++++----
 3 files changed, 41 insertions(+), 4 deletions(-)

-- 
2.20.1

[PATCH v2 1/2] PM: hibernate: add pm_hibernation_snapshot_done() helper

[Haowen Tu]

During hibernation, after create_image() saves the memory snapshot, the
kernel resumes devices with PMSG_THAW solely to write the hibernation
image to storage, then powers off.  Drivers for hardware not involved in
storage I/O have no reason to reinitialize during this transient phase.

Some subsystems, such as USB, do not expose the hibernation PM message
to driver resume callbacks, so drivers there need an explicit query to
distinguish the image-write phase from the final restore path.  Export
pm_hibernation_snapshot_done() for this purpose.

The implementation returns !!in_suspend, which is set to 1 in
create_image() just before swsusp_arch_suspend().  Because in_suspend is
marked __nosavedata, it is not saved into the hibernation image; on the
restore path the variable remains 0, so the helper correctly returns
false during PMSG_RESTORE device resume.

Clear in_suspend before releasing snapshot memory on hibernation failure
paths and after swsusp_write() returns, so the helper does not report a
stale snapshot after the snapshot pages have been released.

Signed-off-by: Haowen Tu <tuhaowen@uniontech.com>
---
Changes in v2:
- Rename pm_hibernation_storing_image() to
  pm_hibernation_snapshot_done().
- Clear in_suspend before releasing snapshot memory on failure paths and
  after swsusp_write() returns.

 include/linux/suspend.h  |  2 ++
 kernel/power/hibernate.c | 31 +++++++++++++++++++++++++++----
 2 files changed, 29 insertions(+), 4 deletions(-)

diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index b02876f1ae38..78e7e33c3d19 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -393,6 +393,7 @@ extern void hibernation_set_ops(const struct platform_hibernation_ops *ops);
 extern int hibernate(void);
 extern bool system_entering_hibernation(void);
 extern bool hibernation_available(void);
+extern bool pm_hibernation_snapshot_done(void);
 asmlinkage int swsusp_save(void);
 extern struct pbe *restore_pblist;
 int pfn_is_nosave(unsigned long pfn);
@@ -412,6 +413,7 @@ static inline void hibernation_set_ops(const struct platform_hibernation_ops *op
 static inline int hibernate(void) { return -ENOSYS; }
 static inline bool system_entering_hibernation(void) { return false; }
 static inline bool hibernation_available(void) { return false; }
+static inline bool pm_hibernation_snapshot_done(void) { return false; }
 
 static inline int hibernate_quiet_exec(int (*func)(void *data), void *data) {
 	return -ENOTSUPP;
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index af8d07bafe02..47047937e262 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -113,6 +113,25 @@ bool hibernation_available(void)
 		!secretmem_active() && !cxl_mem_active();
 }
 
+/**
+ * pm_hibernation_snapshot_done - check if a hibernation snapshot is available
+ *
+ * After create_image() saves a memory snapshot, the kernel briefly resumes
+ * devices with PMSG_THAW to write the image to storage before final powerdown.
+ * Drivers that do not need to participate in image writing may call this
+ * helper from their resume callbacks to skip unnecessary hardware
+ * initialization during that transient phase.
+ *
+ * Context: May be called from device PM callbacks.
+ * Return: %true if a hibernation snapshot has been taken and has not been
+ *         released yet.
+ */
+bool pm_hibernation_snapshot_done(void)
+{
+	return !!in_suspend;
+}
+EXPORT_SYMBOL_GPL(pm_hibernation_snapshot_done);
+
 /**
  * hibernation_set_ops - Set the global hibernate operations.
  * @ops: Hibernation operations to use in subsequent hibernation transitions.
@@ -418,6 +437,7 @@ static void shrink_shmem_memory(void)
 int hibernation_snapshot(int platform_mode)
 {
 	pm_message_t msg;
+	bool snapshot_done;
 	int error;
 
 	pm_suspend_clear_flags();
@@ -474,15 +494,18 @@ int hibernation_snapshot(int platform_mode)
 	 * returns here (1) after the image has been created or the
 	 * image creation has failed and (2) after a successful restore.
 	 */
+	snapshot_done = in_suspend;
 
 	/* We may need to release the preallocated image pages here. */
-	if (error || !in_suspend)
+	if (error || !snapshot_done) {
+		in_suspend = 0;
 		swsusp_free();
+	}
 
-	msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
+	msg = snapshot_done ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
 	dpm_resume(msg);
 
-	if (error || !in_suspend)
+	if (error || !snapshot_done)
 		pm_restore_gfp_mask();
 
 	console_resume_all();
@@ -865,6 +888,7 @@ int hibernate(void)
 
 		pm_pr_dbg("Writing hibernation image.\n");
 		error = swsusp_write(flags);
+		in_suspend = 0;
 		swsusp_free();
 		if (!error) {
 			if (hibernation_mode == HIBERNATION_TEST_RESUME)
@@ -872,7 +896,6 @@ int hibernate(void)
 			else
 				power_down();
 		}
-		in_suspend = 0;
 		pm_restore_gfp_mask();
 	} else {
 		pm_pr_dbg("Hibernation image restored successfully.\n");
-- 
2.20.1

Re: [PATCH v2 1/2] PM: hibernate: add pm_hibernation_snapshot_done() helper

[Rafael J. Wysocki]

On Thu, May 28, 2026 at 10:19 AM Haowen Tu <tuhaowen@uniontech.com> wrote:
>
> During hibernation, after create_image() saves the memory snapshot, the
> kernel resumes devices with PMSG_THAW solely to write the hibernation
> image to storage, then powers off.  Drivers for hardware not involved in
> storage I/O have no reason to reinitialize during this transient phase.

They do have a reason for doing it.

Their poweroff (or shutdown) callbacks will be called while preparing
to power off the system subsequently and they need to be ready for
that.  The most straightforward way to achieve this is to resume so
they can "suspend" again.

> Some subsystems, such as USB, do not expose the hibernation PM message
> to driver resume callbacks, so drivers there need an explicit query to
> distinguish the image-write phase from the final restore path.  Export
> pm_hibernation_snapshot_done() for this purpose.
>
> The implementation returns !!in_suspend, which is set to 1 in
> create_image() just before swsusp_arch_suspend().  Because in_suspend is
> marked __nosavedata, it is not saved into the hibernation image; on the
> restore path the variable remains 0, so the helper correctly returns
> false during PMSG_RESTORE device resume.
>
> Clear in_suspend before releasing snapshot memory on hibernation failure
> paths and after swsusp_write() returns, so the helper does not report a
> stale snapshot after the snapshot pages have been released.

This last piece needs to be split off into a separate patch.

> Signed-off-by: Haowen Tu <tuhaowen@uniontech.com>
> ---
> Changes in v2:
> - Rename pm_hibernation_storing_image() to
>   pm_hibernation_snapshot_done().
> - Clear in_suspend before releasing snapshot memory on failure paths and
>   after swsusp_write() returns.
>
>  include/linux/suspend.h  |  2 ++
>  kernel/power/hibernate.c | 31 +++++++++++++++++++++++++++----
>  2 files changed, 29 insertions(+), 4 deletions(-)
>
> diff --git a/include/linux/suspend.h b/include/linux/suspend.h
> index b02876f1ae38..78e7e33c3d19 100644
> --- a/include/linux/suspend.h
> +++ b/include/linux/suspend.h
> @@ -393,6 +393,7 @@ extern void hibernation_set_ops(const struct platform_hibernation_ops *ops);
>  extern int hibernate(void);
>  extern bool system_entering_hibernation(void);
>  extern bool hibernation_available(void);
> +extern bool pm_hibernation_snapshot_done(void);
>  asmlinkage int swsusp_save(void);
>  extern struct pbe *restore_pblist;
>  int pfn_is_nosave(unsigned long pfn);
> @@ -412,6 +413,7 @@ static inline void hibernation_set_ops(const struct platform_hibernation_ops *op
>  static inline int hibernate(void) { return -ENOSYS; }
>  static inline bool system_entering_hibernation(void) { return false; }
>  static inline bool hibernation_available(void) { return false; }
> +static inline bool pm_hibernation_snapshot_done(void) { return false; }
>
>  static inline int hibernate_quiet_exec(int (*func)(void *data), void *data) {
>         return -ENOTSUPP;
> diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
> index af8d07bafe02..47047937e262 100644
> --- a/kernel/power/hibernate.c
> +++ b/kernel/power/hibernate.c
> @@ -113,6 +113,25 @@ bool hibernation_available(void)
>                 !secretmem_active() && !cxl_mem_active();
>  }
>
> +/**
> + * pm_hibernation_snapshot_done - check if a hibernation snapshot is available
> + *
> + * After create_image() saves a memory snapshot, the kernel briefly resumes
> + * devices with PMSG_THAW to write the image to storage before final powerdown.
> + * Drivers that do not need to participate in image writing may call this
> + * helper from their resume callbacks to skip unnecessary hardware
> + * initialization during that transient phase.
> + *
> + * Context: May be called from device PM callbacks.
> + * Return: %true if a hibernation snapshot has been taken and has not been
> + *         released yet.
> + */
> +bool pm_hibernation_snapshot_done(void)
> +{
> +       return !!in_suspend;
> +}
> +EXPORT_SYMBOL_GPL(pm_hibernation_snapshot_done);
> +
>  /**
>   * hibernation_set_ops - Set the global hibernate operations.
>   * @ops: Hibernation operations to use in subsequent hibernation transitions.
> @@ -418,6 +437,7 @@ static void shrink_shmem_memory(void)
>  int hibernation_snapshot(int platform_mode)
>  {
>         pm_message_t msg;
> +       bool snapshot_done;
>         int error;
>
>         pm_suspend_clear_flags();
> @@ -474,15 +494,18 @@ int hibernation_snapshot(int platform_mode)
>          * returns here (1) after the image has been created or the
>          * image creation has failed and (2) after a successful restore.
>          */
> +       snapshot_done = in_suspend;
>
>         /* We may need to release the preallocated image pages here. */
> -       if (error || !in_suspend)
> +       if (error || !snapshot_done) {
> +               in_suspend = 0;
>                 swsusp_free();
> +       }
>
> -       msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
> +       msg = snapshot_done ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
>         dpm_resume(msg);
>
> -       if (error || !in_suspend)
> +       if (error || !snapshot_done)
>                 pm_restore_gfp_mask();
>
>         console_resume_all();
> @@ -865,6 +888,7 @@ int hibernate(void)
>
>                 pm_pr_dbg("Writing hibernation image.\n");
>                 error = swsusp_write(flags);
> +               in_suspend = 0;
>                 swsusp_free();
>                 if (!error) {
>                         if (hibernation_mode == HIBERNATION_TEST_RESUME)
> @@ -872,7 +896,6 @@ int hibernate(void)
>                         else
>                                 power_down();
>                 }
> -               in_suspend = 0;
>                 pm_restore_gfp_mask();
>         } else {
>                 pm_pr_dbg("Hibernation image restored successfully.\n");
> --
> 2.20.1

Re: [PATCH v2 1/2] PM: hibernate: add pm_hibernation_snapshot_done() helper

[Haowen Tu]

Hi Rafael,

On Mon, Jun 01, 2026 at 08:22:00PM +0200, Rafael J. Wysocki wrote:
> On Thu, May 28, 2026 at 10:19 AM Haowen Tu <tuhaowen@uniontech.com> wrote:
> >
> > During hibernation, after create_image() saves the memory snapshot, the
> > kernel resumes devices with PMSG_THAW solely to write the hibernation
> > image to storage, then powers off.  Drivers for hardware not involved in
> > storage I/O have no reason to reinitialize during this transient phase.
>
> They do have a reason for doing it.
>
> Their poweroff (or shutdown) callbacks will be called while preparing
> to power off the system subsequently and they need to be ready for
> that.  The most straightforward way to achieve this is to resume so
> they can "suspend" again.

Thanks for pointing this out.

My understanding is that the hibernation image contains the state from
the snapshot point, that is before the subsequent THAW and image-write
phase.  Therefore, on the later restore path, the kernel resumes from the
state captured at the snapshot point and still goes through the normal
PMSG_RESTORE resume path.  The THAW activity after the snapshot is not
part of the restored image state.

That said, I agree that some devices may need to be resumed before the
final poweroff/shutdown callbacks run, so the wording in the changelog is
too broad.  I did not mean to suggest that all non-storage devices can or
should skip THAW resume.

The helper is meant to expose this PM state, not to prescribe that
drivers should skip THAW resume.  Whether a driver uses it would remain a
driver-specific decision, based on whether skipping the hardware
reinitialization is safe for that device, including its subsequent
poweroff/shutdown handling.  Drivers that need the normal THAW resume
before poweroff/shutdown would simply not use it.

In this series the user is uvcvideo.  For USB devices, and specifically
for UVC cameras, the device is hotpluggable and the driver already needs
to tolerate device removal and disconnect-like conditions.  The UVC
driver also does not need the camera streaming engine to be restarted in
order to write the hibernation image, while restarting it has a visible
side effect by turning the camera LED back on.  The check is placed after
the driver's frozen state is cleared, so if image writeout fails, the
driver is not left in the frozen state.

I will reword the changelog in the next version to avoid implying that
non-storage devices generally have no reason to resume during THAW.

> > Clear in_suspend before releasing snapshot memory on hibernation failure
> > paths and after swsusp_write() returns, so the helper does not report a
> > stale snapshot after the snapshot pages have been released.
>
> This last piece needs to be split off into a separate patch.

Sure, I will split the in_suspend cleanup into a separate patch in the
next version.

I will wait for your feedback before sending the next version.

Thanks,
Haowen

[PATCH v3 0/3] PM: hibernate: skip UVC streaming restart after snapshot

[Haowen Tu]

After a hibernation snapshot is created, devices are resumed with
PMSG_THAW before the image is written and the system is powered off.
USB interface driver resume callbacks do not receive the PM event, so
they cannot distinguish this phase from PMSG_RESTORE.

This series first makes the lifetime represented by in_suspend match the
snapshot memory lifetime, then exposes that state through
pm_hibernation_snapshot_done().  The helper only exposes the PM state;
drivers remain responsible for deciding whether device-specific behavior
is safe, including subsequent poweroff or shutdown handling.

As the first user, uvcvideo skips only restarting active streaming
hardware during the transient THAW phase.  Its frozen state and clock are
still updated, a subsequent UVC suspend can stop the stream as usual,
and uvcvideo does not provide a shutdown callback that requires the
streaming hardware to be restarted first.

Changes in v3:
- Split the in_suspend cleanup into a separate patch, as requested by
  Rafael.
- Reword the helper description to clarify that it only exposes PM
  state and that callers must account for poweroff/shutdown handling.
- Restrict the UVC description to skipping the streaming hardware
  restart and explain why it does not prevent UVC shutdown handling.
- Drop extern from the new prototype to satisfy Media CI checkpatch.

Changes in v2:
- Rename pm_hibernation_storing_image() to
  pm_hibernation_snapshot_done().
- Clear in_suspend before releasing snapshot memory on failure paths and
  after swsusp_write() returns.
- Move the UVC check after clearing the frozen state and resetting its
  clock.

Haowen Tu (3):
  PM: hibernate: clear in_suspend before freeing the snapshot
  PM: hibernate: add pm_hibernation_snapshot_done() helper
  media: uvcvideo: skip streaming restart after hibernation snapshot

 drivers/media/usb/uvc/uvc_video.c |  8 ++++++++
 include/linux/suspend.h           |  2 ++
 kernel/power/hibernate.c          | 24 ++++++++++++++++++++----
 3 files changed, 30 insertions(+), 4 deletions(-)

-- 
2.20.1

[PATCH v3 1/3] PM: hibernate: clear in_suspend before freeing the snapshot

[Haowen Tu]

in_suspend indicates that a hibernation snapshot has been created and is
still available.  Keep that state consistent with the lifetime of the
snapshot memory by clearing in_suspend before swsusp_free() releases it.

If image creation fails after in_suspend has been set,
hibernation_snapshot() releases the snapshot memory but currently leaves
in_suspend set.  Preserve its value locally long enough to select the
appropriate device resume message, then clear it before releasing the
snapshot.

Also clear in_suspend before releasing the snapshot after swsusp_write()
returns.

Signed-off-by: Haowen Tu <tuhaowen@uniontech.com>
---
Changes in v3:
- Split this cleanup from the helper patch.

 kernel/power/hibernate.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index af8d07bafe02..6d3e637c5a02 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -418,6 +418,7 @@ static void shrink_shmem_memory(void)
 int hibernation_snapshot(int platform_mode)
 {
 	pm_message_t msg;
+	bool snapshot_done;
 	int error;
 
 	pm_suspend_clear_flags();
@@ -474,15 +475,18 @@ int hibernation_snapshot(int platform_mode)
 	 * returns here (1) after the image has been created or the
 	 * image creation has failed and (2) after a successful restore.
 	 */
+	snapshot_done = in_suspend;
 
 	/* We may need to release the preallocated image pages here. */
-	if (error || !in_suspend)
+	if (error || !snapshot_done) {
+		in_suspend = 0;
 		swsusp_free();
+	}
 
-	msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
+	msg = snapshot_done ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
 	dpm_resume(msg);
 
-	if (error || !in_suspend)
+	if (error || !snapshot_done)
 		pm_restore_gfp_mask();
 
 	console_resume_all();
@@ -865,6 +869,7 @@ int hibernate(void)
 
 		pm_pr_dbg("Writing hibernation image.\n");
 		error = swsusp_write(flags);
+		in_suspend = 0;
 		swsusp_free();
 		if (!error) {
 			if (hibernation_mode == HIBERNATION_TEST_RESUME)
@@ -872,7 +877,6 @@ int hibernate(void)
 			else
 				power_down();
 		}
-		in_suspend = 0;
 		pm_restore_gfp_mask();
 	} else {
 		pm_pr_dbg("Hibernation image restored successfully.\n");
-- 
2.20.1

Re: [PATCH v3 1/3] PM: hibernate: clear in_suspend before freeing the snapshot

[Rafael J. Wysocki (Intel)]

On Thu, Jun 18, 2026 at 3:32 AM Haowen Tu <tuhaowen@uniontech.com> wrote:
>
> in_suspend indicates that a hibernation snapshot has been created and is
> still available.  Keep that state consistent with the lifetime of the
> snapshot memory by clearing in_suspend before swsusp_free() releases it.
>
> If image creation fails after in_suspend has been set,
> hibernation_snapshot() releases the snapshot memory but currently leaves
> in_suspend set.  Preserve its value locally long enough to select the
> appropriate device resume message, then clear it before releasing the
> snapshot.
>
> Also clear in_suspend before releasing the snapshot after swsusp_write()
> returns.
>
> Signed-off-by: Haowen Tu <tuhaowen@uniontech.com>

This is fine with me, so

Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>

and please feel free to route it along with the media patch.

Alternatively, I can pick up the whole series if I get an ACK on the
media patch.

> ---
> Changes in v3:
> - Split this cleanup from the helper patch.
>
>  kernel/power/hibernate.c | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
> index af8d07bafe02..6d3e637c5a02 100644
> --- a/kernel/power/hibernate.c
> +++ b/kernel/power/hibernate.c
> @@ -418,6 +418,7 @@ static void shrink_shmem_memory(void)
>  int hibernation_snapshot(int platform_mode)
>  {
>         pm_message_t msg;
> +       bool snapshot_done;
>         int error;
>
>         pm_suspend_clear_flags();
> @@ -474,15 +475,18 @@ int hibernation_snapshot(int platform_mode)
>          * returns here (1) after the image has been created or the
>          * image creation has failed and (2) after a successful restore.
>          */
> +       snapshot_done = in_suspend;
>
>         /* We may need to release the preallocated image pages here. */
> -       if (error || !in_suspend)
> +       if (error || !snapshot_done) {
> +               in_suspend = 0;
>                 swsusp_free();
> +       }
>
> -       msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
> +       msg = snapshot_done ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE;
>         dpm_resume(msg);
>
> -       if (error || !in_suspend)
> +       if (error || !snapshot_done)
>                 pm_restore_gfp_mask();
>
>         console_resume_all();
> @@ -865,6 +869,7 @@ int hibernate(void)
>
>                 pm_pr_dbg("Writing hibernation image.\n");
>                 error = swsusp_write(flags);
> +               in_suspend = 0;
>                 swsusp_free();
>                 if (!error) {
>                         if (hibernation_mode == HIBERNATION_TEST_RESUME)
> @@ -872,7 +877,6 @@ int hibernate(void)
>                         else
>                                 power_down();
>                 }
> -               in_suspend = 0;
>                 pm_restore_gfp_mask();
>         } else {
>                 pm_pr_dbg("Hibernation image restored successfully.\n");
> --
> 2.20.1

[PATCH v3 2/3] PM: hibernate: add pm_hibernation_snapshot_done() helper

[Haowen Tu]

Some subsystem resume callbacks do not receive the PM event and
therefore cannot distinguish the PMSG_THAW phase after snapshot creation
from the PMSG_RESTORE phase.

Export pm_hibernation_snapshot_done() so a driver can query whether the
hibernation snapshot has been created and is still available.  The
helper only exposes the PM state; callers remain responsible for
ensuring that any device-specific behavior is safe, including subsequent
poweroff or shutdown handling.

The helper returns !!in_suspend.  This variable is set before
swsusp_arch_suspend(), cleared before the snapshot memory is released,
and marked __nosavedata, so it remains clear on the restore path.

Signed-off-by: Haowen Tu <tuhaowen@uniontech.com>
---
Changes in v3:
- Split the in_suspend cleanup into a preceding patch.
- Clarify that callers must account for poweroff/shutdown handling.
- Drop extern from the new prototype.

Changes in v2:
- Rename pm_hibernation_storing_image() to
  pm_hibernation_snapshot_done().

 include/linux/suspend.h  |  2 ++
 kernel/power/hibernate.c | 12 ++++++++++++
 2 files changed, 14 insertions(+)

diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index b02876f1ae38..2cebbec3e2f7 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -393,6 +393,7 @@ extern void hibernation_set_ops(const struct platform_hibernation_ops *ops);
 extern int hibernate(void);
 extern bool system_entering_hibernation(void);
 extern bool hibernation_available(void);
+bool pm_hibernation_snapshot_done(void);
 asmlinkage int swsusp_save(void);
 extern struct pbe *restore_pblist;
 int pfn_is_nosave(unsigned long pfn);
@@ -412,6 +413,7 @@ static inline void hibernation_set_ops(const struct platform_hibernation_ops *op
 static inline int hibernate(void) { return -ENOSYS; }
 static inline bool system_entering_hibernation(void) { return false; }
 static inline bool hibernation_available(void) { return false; }
+static inline bool pm_hibernation_snapshot_done(void) { return false; }
 
 static inline int hibernate_quiet_exec(int (*func)(void *data), void *data) {
 	return -ENOTSUPP;
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 6d3e637c5a02..045d29f55011 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -113,6 +113,18 @@ bool hibernation_available(void)
 		!secretmem_active() && !cxl_mem_active();
 }
 
+/**
+ * pm_hibernation_snapshot_done - check if a hibernation snapshot is available
+ *
+ * Return: %true if a hibernation snapshot has been taken and has not been
+ *         released yet.
+ */
+bool pm_hibernation_snapshot_done(void)
+{
+	return !!in_suspend;
+}
+EXPORT_SYMBOL_GPL(pm_hibernation_snapshot_done);
+
 /**
  * hibernation_set_ops - Set the global hibernate operations.
  * @ops: Hibernation operations to use in subsequent hibernation transitions.
-- 
2.20.1

Re: [PATCH v3 2/3] PM: hibernate: add pm_hibernation_snapshot_done() helper

[Rafael J. Wysocki (Intel)]

On Thu, Jun 18, 2026 at 3:32 AM Haowen Tu <tuhaowen@uniontech.com> wrote:
>
> Some subsystem resume callbacks do not receive the PM event and
> therefore cannot distinguish the PMSG_THAW phase after snapshot creation
> from the PMSG_RESTORE phase.
>
> Export pm_hibernation_snapshot_done() so a driver can query whether the
> hibernation snapshot has been created and is still available.  The
> helper only exposes the PM state; callers remain responsible for
> ensuring that any device-specific behavior is safe, including subsequent
> poweroff or shutdown handling.
>
> The helper returns !!in_suspend.  This variable is set before
> swsusp_arch_suspend(), cleared before the snapshot memory is released,
> and marked __nosavedata, so it remains clear on the restore path.
>
> Signed-off-by: Haowen Tu <tuhaowen@uniontech.com>
> ---
> Changes in v3:
> - Split the in_suspend cleanup into a preceding patch.
> - Clarify that callers must account for poweroff/shutdown handling.
> - Drop extern from the new prototype.

Fine with me now, so

Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>

and please feel free to route it along with the media patch.

> Changes in v2:
> - Rename pm_hibernation_storing_image() to
>   pm_hibernation_snapshot_done().
>
>  include/linux/suspend.h  |  2 ++
>  kernel/power/hibernate.c | 12 ++++++++++++
>  2 files changed, 14 insertions(+)
>
> diff --git a/include/linux/suspend.h b/include/linux/suspend.h
> index b02876f1ae38..2cebbec3e2f7 100644
> --- a/include/linux/suspend.h
> +++ b/include/linux/suspend.h
> @@ -393,6 +393,7 @@ extern void hibernation_set_ops(const struct platform_hibernation_ops *ops);
>  extern int hibernate(void);
>  extern bool system_entering_hibernation(void);
>  extern bool hibernation_available(void);
> +bool pm_hibernation_snapshot_done(void);
>  asmlinkage int swsusp_save(void);
>  extern struct pbe *restore_pblist;
>  int pfn_is_nosave(unsigned long pfn);
> @@ -412,6 +413,7 @@ static inline void hibernation_set_ops(const struct platform_hibernation_ops *op
>  static inline int hibernate(void) { return -ENOSYS; }
>  static inline bool system_entering_hibernation(void) { return false; }
>  static inline bool hibernation_available(void) { return false; }
> +static inline bool pm_hibernation_snapshot_done(void) { return false; }
>
>  static inline int hibernate_quiet_exec(int (*func)(void *data), void *data) {
>         return -ENOTSUPP;
> diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
> index 6d3e637c5a02..045d29f55011 100644
> --- a/kernel/power/hibernate.c
> +++ b/kernel/power/hibernate.c
> @@ -113,6 +113,18 @@ bool hibernation_available(void)
>                 !secretmem_active() && !cxl_mem_active();
>  }
>
> +/**
> + * pm_hibernation_snapshot_done - check if a hibernation snapshot is available
> + *
> + * Return: %true if a hibernation snapshot has been taken and has not been
> + *         released yet.
> + */
> +bool pm_hibernation_snapshot_done(void)
> +{
> +       return !!in_suspend;
> +}
> +EXPORT_SYMBOL_GPL(pm_hibernation_snapshot_done);
> +
>  /**
>   * hibernation_set_ops - Set the global hibernate operations.
>   * @ops: Hibernation operations to use in subsequent hibernation transitions.
> --
> 2.20.1
>

[PATCH v3 3/3] media: uvcvideo: skip streaming restart after hibernation snapshot

[Haowen Tu]

After the hibernation snapshot is created, devices are resumed with
PMSG_THAW before the image is written and the system is powered off.
Restarting an active UVC stream during this phase reinitializes the
camera and visibly turns its indicator LED back on.

Skip only the UVC streaming hardware restart while the snapshot is
available.  The driver's frozen state and clock are still updated before
the check, and a subsequent UVC suspend can stop the stream and select
alternate setting 0 as usual.  uvcvideo does not provide a shutdown
callback that requires the streaming hardware to be restarted first.

This is a device-specific use of pm_hibernation_snapshot_done().  The
helper does not cause other drivers or USB core to skip THAW resume.

Tested with hibernation image written to local storage and resumed from
disk on a system with a USB UVC camera attached; the camera LED remains
off during image writing and the video stream resumes correctly after
restore.

Signed-off-by: Haowen Tu <tuhaowen@uniontech.com>
---
Changes in v3:
- Clarify that only the UVC streaming hardware restart is skipped.
- Explain the subsequent UVC suspend and shutdown handling.

Changes in v2:
- Use pm_hibernation_snapshot_done() after the PM helper was renamed.
- Move the check after clearing the frozen state and resetting the clock.

 drivers/media/usb/uvc/uvc_video.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index f6c8e3223796..1744298f4b1f 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -12,6 +12,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/suspend.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <linux/videodev2.h>
@@ -2151,6 +2152,13 @@ int uvc_video_resume(struct uvc_streaming *stream, int reset)
 	if (!uvc_queue_streaming(&stream->queue))
 		return 0;
 
+	/*
+	 * Avoid restarting the streaming hardware during the transient THAW
+	 * phase after a hibernation snapshot has been created.
+	 */
+	if (pm_hibernation_snapshot_done())
+		return 0;
+
 	ret = uvc_commit_video(stream, &stream->ctrl);
 	if (ret < 0)
 		return ret;
-- 
2.20.1

Re: [PATCH v3 3/3] media: uvcvideo: skip streaming restart after hibernation snapshot

[Laurent Pinchart]

On Thu, Jun 18, 2026 at 09:31:33AM +0800, Haowen Tu wrote:
> After the hibernation snapshot is created, devices are resumed with
> PMSG_THAW before the image is written and the system is powered off.
> Restarting an active UVC stream during this phase reinitializes the
> camera and visibly turns its indicator LED back on.
> 
> Skip only the UVC streaming hardware restart while the snapshot is
> available.  The driver's frozen state and clock are still updated before
> the check, and a subsequent UVC suspend can stop the stream and select
> alternate setting 0 as usual.

Why is that desired (both the decision to only block the resume of the
video interface, and the decision to not block the next suspend) ?

> uvcvideo does not provide a shutdown
> callback that requires the streaming hardware to be restarted first.
> 
> This is a device-specific use of pm_hibernation_snapshot_done().  The
> helper does not cause other drivers or USB core to skip THAW resume.

I don't think this sentence belongs to the commit message.

> Tested with hibernation image written to local storage and resumed from
> disk on a system with a USB UVC camera attached; the camera LED remains
> off during image writing and the video stream resumes correctly after
> restore.
> 
> Signed-off-by: Haowen Tu <tuhaowen@uniontech.com>
> ---
> Changes in v3:
> - Clarify that only the UVC streaming hardware restart is skipped.
> - Explain the subsequent UVC suspend and shutdown handling.
> 
> Changes in v2:
> - Use pm_hibernation_snapshot_done() after the PM helper was renamed.
> - Move the check after clearing the frozen state and resetting the clock.
> 
>  drivers/media/usb/uvc/uvc_video.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
> index f6c8e3223796..1744298f4b1f 100644
> --- a/drivers/media/usb/uvc/uvc_video.c
> +++ b/drivers/media/usb/uvc/uvc_video.c
> @@ -12,6 +12,7 @@
>  #include <linux/list.h>
>  #include <linux/module.h>
>  #include <linux/slab.h>
> +#include <linux/suspend.h>
>  #include <linux/usb.h>
>  #include <linux/usb/hcd.h>
>  #include <linux/videodev2.h>
> @@ -2151,6 +2152,13 @@ int uvc_video_resume(struct uvc_streaming *stream, int reset)
>  	if (!uvc_queue_streaming(&stream->queue))
>  		return 0;
>  
> +	/*
> +	 * Avoid restarting the streaming hardware during the transient THAW
> +	 * phase after a hibernation snapshot has been created.
> +	 */
> +	if (pm_hibernation_snapshot_done())
> +		return 0;
> +
>  	ret = uvc_commit_video(stream, &stream->ctrl);
>  	if (ret < 0)
>  		return ret;

-- 
Regards,

Laurent Pinchart

[PATCH v2 2/2] media: uvcvideo: skip resume after hibernation snapshot

[Haowen Tu]

When a UVC camera is in active use and the system enters S4 hibernation,
the camera is suspended as part of the normal device freeze sequence.
However, after create_image() saves the memory snapshot, the kernel
briefly resumes all devices with PMSG_THAW to write the hibernation
image to storage.  This causes uvc_video_resume() to run and
reinitialize the camera hardware, which visibly turns on the camera
indicator LED during this intermediate phase even though the system is
about to power off.

The UVC device is not needed during the image-write window, where the
system only needs devices required for writing the hibernation image.
USB .resume callbacks do not receive pm_message_t, unlike .suspend, so
use the PM-layer helper to detect this phase.

This is intentionally handled in uvcvideo rather than in USB core.  USB
core cannot skip all interface resume callbacks during hibernation THAW,
because some USB interfaces may be part of the image writeout path or
otherwise be required by dependencies.  uvcvideo has a concrete
user-visible side effect from reinitializing hardware in this transient
phase, and it is not involved in image writeout.

The check is placed after stream->frozen is cleared and the clock is
reset, so that driver state remains consistent if the image write fails
and the system resumes normally instead of powering off.  In that case
userspace will need to restart the stream, but the driver will not be
left with stale frozen state.

Tested with hibernation image written to local storage and resumed from
disk on a system with a USB UVC camera attached; the camera LED remains
off during image writing and the video stream resumes correctly after
restore.

Signed-off-by: Haowen Tu <tuhaowen@uniontech.com>
---
Changes in v2:
- Use pm_hibernation_snapshot_done() after the PM helper was renamed.

 drivers/media/usb/uvc/uvc_video.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index f6c8e3223796..9fa649fd47e0 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -12,6 +12,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/suspend.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <linux/videodev2.h>
@@ -2151,6 +2152,17 @@ int uvc_video_resume(struct uvc_streaming *stream, int reset)
 	if (!uvc_queue_streaming(&stream->queue))
 		return 0;
 
+	/*
+	 * During hibernation image writing (PMSG_THAW), the kernel briefly
+	 * resumes devices after the snapshot has been created.  Skip hardware
+	 * reinitialization to avoid USB traffic and the spurious camera LED
+	 * activation.  stream->frozen has already been cleared, so if the
+	 * image write fails and the system resumes normally, driver state
+	 * remains consistent; userspace will need to restart the stream.
+	 */
+	if (pm_hibernation_snapshot_done())
+		return 0;
+
 	ret = uvc_commit_video(stream, &stream->ctrl);
 	if (ret < 0)
 		return ret;
-- 
2.20.1