From: Sven Peter <sven@kernel.org>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Janne Grunau <j@jannau.net>,
Neal Gompa <neal@gompa.dev>,
Andreas Noever <andreas.noever@gmail.com>,
Mika Westerberg <westeri@kernel.org>,
Yehezkel Bernat <YehezkelShB@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: Konrad Dybcio <konradybcio@kernel.org>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, asahi@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
Sven Peter <sven@kernel.org>
Subject: [PATCH v2 15/22] thunderbolt: Add ring_configure to tb_nhi_ops
Date: Sun, 06 Sep 2026 20:36:38 +0200 [thread overview]
Message-ID: <20260906-b4-apple-soc-tbt-v2-15-1f80085f93fb@kernel.org> (raw)
In-Reply-To: <20260906-b4-apple-soc-tbt-v2-0-1f80085f93fb@kernel.org>
The Apple NHI also uses a separate register range for the receive ring
PDF masks. Add an optional tb_nhi_ops hook for it which falls back to
the standard USB4 NHI method when it is not set.
For the standard method also just write E2E flow control at the same
time the rest of the configuration is written.
Signed-off-by: Sven Peter <sven@kernel.org>
---
drivers/thunderbolt/nhi.c | 48 +++++++++++++++++++++++++++--------------------
drivers/thunderbolt/nhi.h | 4 ++++
2 files changed, 32 insertions(+), 20 deletions(-)
diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index 4ef86e7c0285..2d622b365c4f 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -244,6 +244,24 @@ static void ring_iowrite32options(struct tb_ring *ring, u32 value, u32 offset)
iowrite32(value, nhi_ring_options_base(ring) + offset);
}
+static void ring_configure(struct tb_ring *ring, u32 flags, u32 e2e_flags)
+{
+ if (ring->is_tx)
+ ring_iowrite32options(ring, 0, 4);
+ else
+ ring_iowrite32options(ring, ring->sof_mask << 16 | ring->eof_mask, 4);
+
+ ring_iowrite32options(ring, flags | e2e_flags, 0);
+}
+
+static void nhi_ring_configure(struct tb_ring *ring, u32 flags, u32 e2e_flags)
+{
+ if (ring->nhi->ops->ring_configure)
+ ring->nhi->ops->ring_configure(ring, flags, e2e_flags);
+ else
+ ring_configure(ring, flags, e2e_flags);
+}
+
static bool ring_full(struct tb_ring *ring)
{
return ((ring->head + 1) % ring->size) == ring->tail;
@@ -699,6 +717,7 @@ EXPORT_SYMBOL_GPL(tb_ring_alloc_rx);
*/
void tb_ring_start(struct tb_ring *ring)
{
+ u32 e2e_flags = 0;
u16 frame_size;
u32 flags;
@@ -722,30 +741,13 @@ void tb_ring_start(struct tb_ring *ring)
flags = RING_FLAG_ENABLE | RING_FLAG_RAW;
}
- ring_iowrite64desc(ring, ring->descriptors_dma, 0);
- if (ring->is_tx) {
- ring_iowrite32desc(ring, ring->size, 12);
- ring_iowrite32options(ring, 0, 4);
- ring_iowrite32options(ring, flags, 0);
- } else {
- u32 sof_eof_mask = ring->sof_mask << 16 | ring->eof_mask;
-
- ring_iowrite32desc(ring, (frame_size << 16) | ring->size, 12);
- ring_iowrite32options(ring, sof_eof_mask, 4);
- ring_iowrite32options(ring, flags, 0);
- }
-
- /*
- * Now that the ring valid bit is set we can configure E2E if
- * enabled for the ring.
- */
if (ring->flags & RING_FLAG_E2E) {
if (!ring->is_tx) {
u32 hop;
hop = ring->e2e_tx_hop << REG_RX_OPTIONS_E2E_HOP_SHIFT;
hop &= REG_RX_OPTIONS_E2E_HOP_MASK;
- flags |= hop;
+ e2e_flags |= hop;
dev_dbg(ring->nhi->dev,
"enabling E2E for %s %d with TX HopID %d\n",
@@ -755,10 +757,16 @@ void tb_ring_start(struct tb_ring *ring)
RING_TYPE(ring), ring->hop);
}
- flags |= RING_FLAG_E2E_FLOW_CONTROL;
- ring_iowrite32options(ring, flags, 0);
+ e2e_flags |= RING_FLAG_E2E_FLOW_CONTROL;
}
+ ring_iowrite64desc(ring, ring->descriptors_dma, 0);
+ if (ring->is_tx)
+ ring_iowrite32desc(ring, ring->size, 12);
+ else
+ ring_iowrite32desc(ring, (frame_size << 16) | ring->size, 12);
+ nhi_ring_configure(ring, flags, e2e_flags);
+
if (!(ring->flags & RING_FLAG_NO_INTERRUPT))
nhi_ring_interrupt_active(ring, true);
ring->running = true;
diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h
index ca3eddf862e0..e4964772a442 100644
--- a/drivers/thunderbolt/nhi.h
+++ b/drivers/thunderbolt/nhi.h
@@ -62,6 +62,9 @@ extern const struct dev_pm_ops nhi_pm_ops;
* @ring_interrupt_mask: NHI specific hook to mask/unmask the interrupt of a
* single ring. If not set the standard USB4 NHI
* registers are used.
+ * @ring_configure: NHI specific hook to program the ring options registers
+ * and enable the ring with the given flags. If not set
+ * the standard USB4 NHI registers are used.
* @is_present: Whether the device is currently present on the parent bus
* @init_interrupts: NHI specific interrupt initialization hook
* @reset_interface: Resets the host interface
@@ -81,6 +84,7 @@ struct tb_nhi_ops {
void __iomem *(*ring_options_base)(struct tb_ring *ring);
void (*ring_interrupt_active)(struct tb_ring *ring, bool active);
void (*ring_interrupt_mask)(struct tb_ring *ring, bool mask);
+ void (*ring_configure)(struct tb_ring *ring, u32 flags, u32 e2e_flags);
bool (*is_present)(struct tb_nhi *nhi);
int (*init_interrupts)(struct tb_nhi *nhi);
void (*reset_interface)(struct tb_nhi *nhi);
--
2.55.0
next prev parent reply other threads:[~2026-09-06 18:37 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-06 18:36 [PATCH v2 00/22] Initial USB4/Thunderbolt support for Apple M1/M2/M3 SoCs Sven Peter
2026-09-06 18:36 ` [PATCH v2 01/22] usb: typec: Add alternate mode state notifiers Sven Peter
2026-09-07 13:27 ` Joshua Peisach
2026-09-08 12:00 ` Heikki Krogerus
2026-09-06 18:36 ` [PATCH v2 02/22] usb: typec: Represent USB4 on the Type-C bus Sven Peter
2026-09-07 13:31 ` Joshua Peisach
2026-09-08 12:07 ` Heikki Krogerus
2026-09-06 18:36 ` [PATCH v2 03/22] usb: typec: tipd: Register a USB4 port mode for CD321x Sven Peter
2026-09-06 18:36 ` [PATCH v2 04/22] usb: typec: tipd: Publish CD321x partner alternate modes Sven Peter
2026-09-06 18:36 ` [PATCH v2 05/22] dt-bindings: thunderbolt: Add Apple USB4/Thunderbolt NHI Sven Peter
2026-09-06 18:36 ` [PATCH v2 06/22] dt-bindings: thunderbolt: Add Apple USB4/Thunderbolt ACIO block Sven Peter
2026-09-06 18:36 ` [PATCH v2 07/22] thunderbolt: Try reading host DROM from device tree first Sven Peter
2026-09-06 18:36 ` [PATCH v2 08/22] thunderbolt: Don't read the UID if we already know it Sven Peter
2026-09-06 18:36 ` [PATCH v2 09/22] thunderbolt: Allocate ring HopID before requesting the ring interrupt Sven Peter
2026-09-06 18:36 ` [PATCH v2 10/22] thunderbolt: Unlock host router ports during startup Sven Peter
2026-09-08 8:22 ` Mika Westerberg
2026-09-06 18:36 ` [PATCH v2 11/22] thunderbolt: Find Apple VSE capability " Sven Peter
2026-09-07 13:38 ` Joshua Peisach
2026-09-08 20:24 ` Sven Peter
2026-09-06 18:36 ` [PATCH v2 12/22] thunderbolt: Add ring_interrupt_active to tb_nhi_ops Sven Peter
2026-09-06 18:36 ` [PATCH v2 13/22] thunderbolt: Add ring register accessors " Sven Peter
2026-09-08 8:32 ` Mika Westerberg
2026-09-06 18:36 ` [PATCH v2 14/22] thunderbolt: Add ring_interrupt_mask " Sven Peter
2026-09-06 18:36 ` Sven Peter [this message]
2026-09-06 18:36 ` [PATCH v2 16/22] thunderbolt: Add add_links " Sven Peter
2026-09-08 8:35 ` Mika Westerberg
2026-09-06 18:36 ` [PATCH v2 17/22] thunderbolt: Add QUIRK_NO_USB3_BW_ALLOC Sven Peter
2026-09-06 18:36 ` [PATCH v2 18/22] thunderbolt: Export symbols required by the Apple Silicon driver Sven Peter
2026-09-06 18:36 ` [PATCH v2 19/22] thunderbolt: Add Apple Silicon support Sven Peter
2026-09-08 9:18 ` Mika Westerberg
2026-09-08 19:02 ` Sven Peter
2026-09-08 19:04 ` Sven Peter
2026-09-09 6:06 ` Mika Westerberg
2026-09-09 15:20 ` Sven Peter
2026-09-09 15:25 ` Sven Peter
2026-09-10 4:52 ` Mika Westerberg
2026-09-10 4:50 ` Mika Westerberg
2026-09-06 18:36 ` [PATCH v2 20/22] arm64: dts: apple: t8103: Add USB4 ACIO and NHI Sven Peter
2026-09-06 18:36 ` [PATCH v2 21/22] arm64: dts: apple: t8112: " Sven Peter
2026-09-06 18:36 ` [PATCH v2 22/22] arm64: dts: apple: t60xx: " Sven Peter
2026-09-07 13:52 ` [PATCH v2 00/22] Initial USB4/Thunderbolt support for Apple M1/M2/M3 SoCs Joshua Peisach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260906-b4-apple-soc-tbt-v2-15-1f80085f93fb@kernel.org \
--to=sven@kernel.org \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=asahi@lists.linux.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=j@jannau.net \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=neal@gompa.dev \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=westeri@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox