From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>, Hongyu Xie <xiehongyu1@kylinos.cn>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH v2 04/11] xhci: check device notification type before forwarding wake event
Date: Fri, 9 Oct 2026 18:16:17 +0300 [thread overview]
Message-ID: <20261009151624.618967-5-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20261009151624.618967-1-mathias.nyman@linux.intel.com>
From: Hongyu Xie <xiehongyu1@kylinos.cn>
The xHCI driver programs the Device Notification Control register to
only enable the Function Wake device notification (N1), so any Device
Notification Event TRB received is expected to be a function wake
notification. handle_device_notification() does however not check the
Notification Type field of the event (xHCI 1.2 section 6.4.2.7, DW0
bits 7:4), and forwards every device notification event as a function
wake.
A host controller that delivers an unexpected notification type (e.g.
due to broken firmware or emulation) would trigger a spurious wake
notification on the parent hub.
Parse the notification type and drop events other than Function Wake
with a warning, mirroring the slot ID validation in the same function.
DEV_NOTE_FWAKE is the DNCTRL register bit for notification type 1
(N1), while the event TRB carries the notification type value itself,
so add a separate DEV_NOTE_TYPE_FWAKE constant for the comparison.
[mn:] reduce warning to a debug message
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-ring.c | 9 +++++++++
drivers/usb/host/xhci.h | 5 +++++
2 files changed, 14 insertions(+)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index cbce9f8f07fa..7f480db2983e 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1954,6 +1954,7 @@ static void handle_device_notification(struct xhci_hcd *xhci,
union xhci_trb *event)
{
u32 slot_id;
+ u32 type;
struct usb_device *udev;
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->generic.field[3]));
@@ -1963,6 +1964,14 @@ static void handle_device_notification(struct xhci_hcd *xhci,
return;
}
+ /* xHCI 1.2 6.4.2.7: Notification Type is DW0 bits 7:4 */
+ type = TRB_TO_DEV_NOTE_TYPE(le32_to_cpu(event->generic.field[0]));
+ if (type != DEV_NOTE_TYPE_FWAKE) {
+ xhci_dbg(xhci, "Unsupported device notification type %u for slot ID %u\n",
+ type, slot_id);
+ return;
+ }
+
xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",
slot_id);
udev = xhci->devs[slot_id]->udev;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index c7bfa7f028d3..ec4bfeb4887c 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -187,6 +187,8 @@ struct xhci_op_regs {
* SW does need to pay attention to function wake notifications.
*/
#define DEV_NOTE_FWAKE BIT(1)
+/* Notification Type value carried by a Device Notification Event TRB (6.4.2.7) */
+#define DEV_NOTE_TYPE_FWAKE 1
/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
/* bit 0 - Cycle bit indicates the ownership of the command ring */
@@ -996,6 +998,9 @@ enum xhci_ep_reset_type {
#define TRB_TO_PACKET_TYPE(p) ((p) & 0x1f)
#define TRB_TO_ROOTHUB_PORT(p) (((p) & (0xff << 24)) >> 24)
+/* Device Notification Event TRB fields, 6.4.2.7 */
+#define TRB_TO_DEV_NOTE_TYPE(p) (((p) & (0xf << 4)) >> 4)
+
enum xhci_setup_dev {
SETUP_CONTEXT_ONLY,
SETUP_CONTEXT_ADDRESS,
--
2.43.0
next prev parent reply other threads:[~2026-10-09 15:16 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-09 15:16 [PATCH v2 00/11] xhci features and fixes for usb-next Mathias Nyman
2026-10-09 15:16 ` [PATCH v2 01/11] usb: xhci: return an error if the host is not halted Mathias Nyman
2026-10-09 15:24 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 02/11] usb: xhci: Unlock for command abort polling Mathias Nyman
2026-10-09 15:27 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 03/11] usb: xhci: fix typos in comments Mathias Nyman
2026-10-09 15:18 ` sashiko-bot
2026-10-09 15:16 ` Mathias Nyman [this message]
2026-10-09 15:23 ` [PATCH v2 04/11] xhci: check device notification type before forwarding wake event sashiko-bot
2026-10-09 15:16 ` [PATCH v2 05/11] xhci: dbc: lock the minor IDR on registration failure Mathias Nyman
2026-10-09 15:25 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 06/11] usb: xhci: Guarantee URB giveback on Ring Underrun/Overrun Mathias Nyman
2026-10-09 15:25 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 07/11] usb: xhci: Don't set the skip flag on non-isoc endpoints Mathias Nyman
2026-10-09 15:23 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 08/11] usb: xhci: Shorten the TD skipping loop Mathias Nyman
2026-10-09 15:22 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 09/11] usb: xhci: Rework and improve the TD matching and skipping logic Mathias Nyman
2026-10-09 15:34 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 10/11] usb: xhci: Fix bounce buffer overflow Mathias Nyman
2026-10-09 15:28 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 11/11] xhci: Prevent invalid vdev dereference during sideband unregister Mathias Nyman
2026-10-09 15:30 ` sashiko-bot
2026-10-09 22:47 ` Mathias Nyman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261009151624.618967-5-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=xiehongyu1@kylinos.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox