From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
Michal Pecio <michal.pecio@gmail.com>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH v2 08/11] usb: xhci: Shorten the TD skipping loop
Date: Fri, 9 Oct 2026 18:16:21 +0300 [thread overview]
Message-ID: <20261009151624.618967-9-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20261009151624.618967-1-mathias.nyman@linux.intel.com>
From: Michal Pecio <michal.pecio@gmail.com>
Half of this loop is code which only executes once to deal with cases
where no TD matches the event and then it returns. This code needs not
to be in any kind of loop, so get it out.
Optimize conditionals remaining in the loop body.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-ring.c | 68 +++++++++++++++++-------------------
1 file changed, 33 insertions(+), 35 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 2dd11732bb87..7597ef8105c6 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2862,10 +2862,9 @@ static int handle_tx_event(struct xhci_hcd *xhci,
td = list_first_entry(&ep_ring->td_list, struct xhci_td,
td_list);
- /* Is this TRB not part of the currently executing TD? */
- if (!trb_in_td(td, ep_trb_dma)) {
+ if (ep->skip) {
- if (ep->skip) {
+ if (!trb_in_td(td, ep_trb_dma)) {
/* this event is unlikely to match any TD, don't skip them all */
if (trb_comp_code == COMP_STOPPED_LENGTH_INVALID)
return 0;
@@ -2903,38 +2902,6 @@ static int handle_tx_event(struct xhci_hcd *xhci,
goto check_endpoint_halted;
}
- /* TD was queued after xrun, maybe xrun was on a link, don't panic yet */
- if (ring_xrun_event)
- return 0;
-
- /*
- * Skip the Force Stopped Event. The 'ep_trb' of FSE is not in the current
- * TD pointed by 'ep_ring->dequeue' because that the hardware dequeue
- * pointer still at the previous TRB of the current TD. The previous TRB
- * maybe a Link TD or the last TRB of the previous TD. The command
- * completion handle will take care the rest.
- */
- if (trb_comp_code == COMP_STOPPED ||
- trb_comp_code == COMP_STOPPED_LENGTH_INVALID) {
- return 0;
- }
-
- /*
- * Some hosts give a spurious success event after a short
- * transfer or error on last TRB. Ignore it.
- */
- if (xhci_spurious_success_tx_event(xhci, ep_ring)) {
- xhci_dbg(xhci, "Spurious event dma %pad, comp_code %u after %u\n",
- &ep_trb_dma, trb_comp_code, ep_ring->old_trb_comp_code);
- ep_ring->old_trb_comp_code = 0;
- return 0;
- }
-
- /* HC is busted, give up! */
- goto debug_finding_td;
- }
-
- if (ep->skip) {
xhci_dbg(xhci,
"Found td. Clear skip flag for slot %u ep %u.\n",
slot_id, ep_index);
@@ -2949,6 +2916,37 @@ static int handle_tx_event(struct xhci_hcd *xhci,
*/
} while (ep->skip);
+ /* Handle events not referencing the current TD */
+ if (!trb_in_td(td, ep_trb_dma)) {
+ /* TD was queued after xrun, maybe xrun was on a link, don't panic yet */
+ if (ring_xrun_event)
+ return 0;
+
+ /*
+ * Skip the Force Stopped Event. The 'ep_trb' of FSE is not in the current
+ * TD pointed by 'ep_ring->dequeue' because that the hardware dequeue
+ * pointer still at the previous TRB of the current TD. The previous TRB
+ * maybe a Link TD or the last TRB of the previous TD. The command
+ * completion handle will take care the rest.
+ */
+ if (trb_comp_code == COMP_STOPPED || trb_comp_code == COMP_STOPPED_LENGTH_INVALID)
+ return 0;
+
+ /*
+ * Some hosts give a spurious success event after a short
+ * transfer or error on last TRB. Ignore it.
+ */
+ if (xhci_spurious_success_tx_event(xhci, ep_ring)) {
+ xhci_dbg(xhci, "Spurious event dma %pad, comp_code %u after %u\n",
+ &ep_trb_dma, trb_comp_code, ep_ring->old_trb_comp_code);
+ ep_ring->old_trb_comp_code = 0;
+ return 0;
+ }
+
+ /* HC is busted, give up! */
+ goto debug_finding_td;
+ }
+
ep_ring->old_trb_comp_code = trb_comp_code;
/* Get out if a TD was queued at enqueue after the xrun occurred */
--
2.43.0
next prev parent reply other threads:[~2026-10-09 15:16 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-09 15:16 [PATCH v2 00/11] xhci features and fixes for usb-next Mathias Nyman
2026-10-09 15:16 ` [PATCH v2 01/11] usb: xhci: return an error if the host is not halted Mathias Nyman
2026-10-09 15:24 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 02/11] usb: xhci: Unlock for command abort polling Mathias Nyman
2026-10-09 15:27 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 03/11] usb: xhci: fix typos in comments Mathias Nyman
2026-10-09 15:18 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 04/11] xhci: check device notification type before forwarding wake event Mathias Nyman
2026-10-09 15:23 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 05/11] xhci: dbc: lock the minor IDR on registration failure Mathias Nyman
2026-10-09 15:25 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 06/11] usb: xhci: Guarantee URB giveback on Ring Underrun/Overrun Mathias Nyman
2026-10-09 15:25 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 07/11] usb: xhci: Don't set the skip flag on non-isoc endpoints Mathias Nyman
2026-10-09 15:23 ` sashiko-bot
2026-10-09 15:16 ` Mathias Nyman [this message]
2026-10-09 15:22 ` [PATCH v2 08/11] usb: xhci: Shorten the TD skipping loop sashiko-bot
2026-10-09 15:16 ` [PATCH v2 09/11] usb: xhci: Rework and improve the TD matching and skipping logic Mathias Nyman
2026-10-09 15:34 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 10/11] usb: xhci: Fix bounce buffer overflow Mathias Nyman
2026-10-09 15:28 ` sashiko-bot
2026-10-09 15:16 ` [PATCH v2 11/11] xhci: Prevent invalid vdev dereference during sideband unregister Mathias Nyman
2026-10-09 15:30 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261009151624.618967-9-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=michal.pecio@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox