[PATCH net-next v5 5/6] net: usb: pegasus: Move long delayed work on system_dfl_long_wq

[PATCH net-next v5 5/6] net: usb: pegasus: Move long delayed work on system_dfl_long_wq

[Marco Crivellari]

Currently the code enqueues the carrier_check delayed work using
queue_delayed_work(), on system_long_wq. This workqueue should be used
when long works are expected and it is a per-cpu workqueue.

queue_delayed_work() ends up calling __queue_delayed_work(), which, since
the work is always queued with CARRIER_CHECK_DELAY, sets a global timer
that could fire anywhere, enqueuing the work where the timer fired.

Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption. Long work shouldn't stick to a single
CPU.

Recently, a new unbound workqueue specific for long running work has
been added:

    c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")

Since carrier_check doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_long_wq with system_dfl_long_wq so that the work may benefit from
scheduler task placement.

Cc: Petko Manolov <petkan@nucleusys.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 drivers/net/usb/pegasus.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 68e4b6658dd2..a4ecfec290b6 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1126,8 +1126,9 @@ static void check_carrier(struct work_struct *work)
 	pegasus_t *pegasus = container_of(work, pegasus_t, carrier_check.work);
 	set_carrier(pegasus->net);
 	if (!(pegasus->flags & PEGASUS_UNPLUG)) {
-		queue_delayed_work(system_long_wq, &pegasus->carrier_check,
-			CARRIER_CHECK_DELAY);
+		queue_delayed_work(system_dfl_long_wq,
+				   &pegasus->carrier_check,
+				   CARRIER_CHECK_DELAY);
 	}
 }
 
@@ -1231,7 +1232,7 @@ static int pegasus_probe(struct usb_interface *intf,
 	res = register_netdev(net);
 	if (res)
 		goto out3;
-	queue_delayed_work(system_long_wq, &pegasus->carrier_check,
+	queue_delayed_work(system_dfl_long_wq, &pegasus->carrier_check,
 			   CARRIER_CHECK_DELAY);
 	dev_info(&intf->dev, "%s, %s, %pM\n", net->name,
 		 info ? info->name : "(unknown)", net->dev_addr);
@@ -1296,7 +1297,7 @@ static int pegasus_resume(struct usb_interface *intf)
 		pegasus->intr_urb->actual_length = 0;
 		intr_callback(pegasus->intr_urb);
 	}
-	queue_delayed_work(system_long_wq, &pegasus->carrier_check,
+	queue_delayed_work(system_dfl_long_wq, &pegasus->carrier_check,
 				CARRIER_CHECK_DELAY);
 	return 0;
 }
-- 
2.56.0

[PATCH net-next v5 6/6] net: usb: r8152: Move long delayed work on system_dfl_long_wq

[Marco Crivellari]

Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_long_wq. This workqueue should be used when long works are
expected and it is a per-cpu workqueue.

The function(s) end up calling __queue_delayed_work(), which set a global
timer that could fire anywhere, enqueuing the work where the timer fired.

Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption. Long work shouldn't stick to a single
CPU.

Recently, a new unbound workqueue specific for long running work has
been added:

    c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")

Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_long_wq with system_dfl_long_wq so that the work may benefit from
scheduler task placement.

Cc: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
---
 drivers/net/usb/r8152.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index d3bb7ee9c9bf..4815235e8e73 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -7053,7 +7053,8 @@ static void rtl_hw_phy_work_func_t(struct work_struct *work)
 
 		/* Delay execution in case request_firmware() is not ready yet.
 		 */
-		queue_delayed_work(system_long_wq, &tp->hw_phy_work, HZ * 10);
+		queue_delayed_work(system_dfl_long_wq, &tp->hw_phy_work,
+				   HZ * 10);
 		goto ignore_once;
 	}
 
@@ -8821,7 +8822,7 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
 	clear_bit(SELECTIVE_SUSPEND, &tp->flags);
 	rtl_reset_ocp_base(tp);
 	tp->rtl_ops.init(tp);
-	queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
+	queue_delayed_work(system_dfl_long_wq, &tp->hw_phy_work, 0);
 	set_ethernet_addr(tp, true);
 	return rtl8152_resume(intf);
 }
@@ -10276,7 +10277,7 @@ static int rtl8152_probe_once(struct usb_interface *intf,
 	/* Retry in case request_firmware() is not ready yet. */
 	tp->rtl_fw.retry = true;
 #endif
-	queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
+	queue_delayed_work(system_dfl_long_wq, &tp->hw_phy_work, 0);
 	set_ethernet_addr(tp, false);
 
 	usb_set_intfdata(intf, tp);
-- 
2.56.0

Re: [PATCH net-next v5 6/6] net: usb: r8152: Move long delayed work on system_dfl_long_wq

[Simon Horman]

On Mon, Nov 02, 2026 at 11:56:56AM +0100, Marco Crivellari wrote:
> Currently the code enqueue work items using {queue|mod}_delayed_work(),
> using system_long_wq. This workqueue should be used when long works are
> expected and it is a per-cpu workqueue.
> 
> The function(s) end up calling __queue_delayed_work(), which set a global
> timer that could fire anywhere, enqueuing the work where the timer fired.
> 
> Unbound works could benefit from scheduler task placement, to optimize
> performance and power consumption. Long work shouldn't stick to a single
> CPU.
> 
> Recently, a new unbound workqueue specific for long running work has
> been added:
> 
>     c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")
> 
> Since the workqueue work doesn't rely on per-cpu variables, there is no
> obvious reason that justify the use of a per-cpu workqueue. So change
> system_long_wq with system_dfl_long_wq so that the work may benefit from
> scheduler task placement.
> 
> Cc: Ethan Nelson-Moore <enelsonmoore@gmail.com>
> Cc: linux-usb@vger.kernel.org
> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>

Reviewed-by: Simon Horman <horms@kernel.org>