From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-usb@vger.kernel.org
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>,
Lukas Wunner <lukas@wunner.de>,
Andreas Noever <andreas.noever@gmail.com>,
Gil Fine <gil.fine@linux.intel.com>,
Rene Sapiens <rene.sapiens@linux.intel.com>,
Pooja Katiyar <pooja.katiyar@intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>
Subject: [PATCH 14/18] thunderbolt: Assign domain to the routers in KUnit tests
Date: Thu, 19 Nov 2026 18:12:28 +0100 [thread overview]
Message-ID: <20261119171232.1616316-15-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <20261119171232.1616316-1-mika.westerberg@linux.intel.com>
From: "Mika Westerberg (Intel)" <westeri@kernel.org>
The tests allocate routers without a domain (struct tb) but some of the
tunneling parameters, such as the buffer allocation, need to be read
from the host router which is reached through the domain. For this
reason allocate a dummy domain structure, and fill in the host router
pointer accordingly.
Signed-off-by: Mika Westerberg (Intel) <westeri@kernel.org>
---
drivers/thunderbolt/test.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/thunderbolt/test.c b/drivers/thunderbolt/test.c
index a1f9dbb66940..9c6da22cd100 100644
--- a/drivers/thunderbolt/test.c
+++ b/drivers/thunderbolt/test.c
@@ -90,6 +90,24 @@ static struct tb_switch *alloc_switch(struct kunit *test, u64 route,
return sw;
}
+/*
+ * Allocates a domain for the host router. The routers of the domain need
+ * to be able to reach the host router as some of the parameters, such as
+ * the buffer allocation, are read from it.
+ */
+static int alloc_domain(struct kunit *test, struct tb_switch *host)
+{
+ struct tb *tb;
+
+ tb = kunit_kzalloc(test, sizeof(*tb), GFP_KERNEL);
+ if (!tb)
+ return -ENOMEM;
+
+ tb->root_switch = host;
+ host->tb = tb;
+ return 0;
+}
+
static struct tb_switch *alloc_host(struct kunit *test)
{
struct tb_switch *sw;
@@ -98,6 +116,9 @@ static struct tb_switch *alloc_host(struct kunit *test)
if (!sw)
return NULL;
+ if (alloc_domain(test, sw))
+ return NULL;
+
sw->config.vendor_id = 0x8086;
sw->config.device_id = 0x9a1b;
@@ -333,6 +354,8 @@ static struct tb_switch *alloc_dev_default(struct kunit *test,
if (!parent)
return sw;
+ sw->tb = parent->tb;
+
/* Link them */
upstream_port = tb_upstream_port(sw);
port = tb_port_at(route, parent);
--
2.50.1
next prev parent reply other threads:[~2026-11-19 17:12 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 17:12 [PATCH 00/18] thunderbolt: Add support for shared buffering Mika Westerberg
2026-11-19 17:12 ` [PATCH 01/18] thunderbolt: Avoid leaking of DMA tunnel after XDomain removal Mika Westerberg
2026-11-19 17:32 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 02/18] thunderbolt: Tear down DMA tunnels on every " Mika Westerberg
2026-11-19 17:34 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 03/18] thunderbolt: Delay re-pairing DP IN/OUT if DPRX negotiation fails Mika Westerberg
2026-11-19 17:26 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 04/18] thunderbolt: Call DP tunnel activation callback with tb->lock held Mika Westerberg
2026-11-19 17:28 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 05/18] thunderbolt: Re-apply Alpine/Titan Ridge flow on resume Mika Westerberg
2026-11-19 17:35 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 06/18] thunderbolt: Return -ESHUTDOWN when control channel is not running Mika Westerberg
2026-11-19 17:25 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 07/18] thunderbolt: Add usb4_port_hotplug_disable() Mika Westerberg
2026-11-19 17:22 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 08/18] thunderbolt: Move tb_plug_events_active() before tb_switch_reset_host() Mika Westerberg
2026-11-19 17:25 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 09/18] thunderbolt: Add tb_port_state_is_up() Mika Westerberg
2026-11-19 17:22 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 10/18] thunderbolt: Split host router port reset into a separate function Mika Westerberg
2026-11-19 17:22 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 11/18] thunderbolt: Reset topology after suspend-to-disk Mika Westerberg
2026-11-19 17:44 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 12/18] thunderbolt: Drop tunnel discovery without HopID allocation Mika Westerberg
2026-11-19 17:26 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 13/18] thunderbolt: Always take domain lock when tb_tunnel_put() is called Mika Westerberg
2026-11-19 17:34 ` sashiko-bot
2026-11-19 17:12 ` Mika Westerberg [this message]
2026-11-19 17:26 ` [PATCH 14/18] thunderbolt: Assign domain to the routers in KUnit tests sashiko-bot
2026-11-19 17:12 ` [PATCH 15/18] thunderbolt: Rework tunnel credit allocation Mika Westerberg
2026-11-19 17:43 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 16/18] thunderbolt: Add support for shared flow control Mika Westerberg
2026-11-19 17:34 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 17/18] thunderbolt: Use restricted shared flow control for DMA tunnels on intra-domain links Mika Westerberg
2026-11-19 17:32 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 18/18] thunderbolt: Add KUnit tests for shared buffering Mika Westerberg
2026-11-19 17:28 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119171232.1616316-15-mika.westerberg@linux.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=gil.fine@linux.intel.com \
--cc=linux-usb@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=pooja.katiyar@intel.com \
--cc=rene.sapiens@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox