From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-usb@vger.kernel.org
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>,
Lukas Wunner <lukas@wunner.de>,
Andreas Noever <andreas.noever@gmail.com>,
Gil Fine <gil.fine@linux.intel.com>,
Rene Sapiens <rene.sapiens@linux.intel.com>,
Pooja Katiyar <pooja.katiyar@intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>
Subject: [PATCH 17/18] thunderbolt: Use restricted shared flow control for DMA tunnels on intra-domain links
Date: Thu, 19 Nov 2026 18:12:31 +0100 [thread overview]
Message-ID: <20261119171232.1616316-18-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <20261119171232.1616316-1-mika.westerberg@linux.intel.com>
From: Gil Fine <gil.fine@linux.intel.com>
Currently all DMA tunnels use the dedicated flow control scheme, which
allocates a separate pool of credits for every DMA tunnel on each link
it crosses.
Take for example the following topology, where the Host1 <-> Hub link is
an intra-domain link and the links from the Hub to Host2, Host3 and
Host4 are inter-domain links carrying DMA tunnels:
--- Domain 1 ---
[Host1: USB4 v1]
|
|
[Hub: USB4 v2]
/ | \
/ | \
--Domain2-- --Domain3-- --Domain4--
| | |
[Host2] [Host3] [Host4]
USB4v1 USB4v1 USB4v1
When several DMA tunnels share the same intra-domain link (Host1 <-> Hub)
and that link supports shared flow control, they can use shared
buffering instead, so there is no need to allocate a separate pool of
credits for each additional DMA tunnel.
Change the flow control from dedicated to restricted shared on
intra-domain links when both ends of the link support it. For links
where shared flow control is not supported, and for inter-domain links,
keep the existing dedicated flow control.
This allows more efficient use of credits on the link.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg (Intel) <westeri@kernel.org>
---
drivers/thunderbolt/tunnel.c | 31 ++++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c
index 2ed3cb57d8a9..3f2b6f8eb243 100644
--- a/drivers/thunderbolt/tunnel.c
+++ b/drivers/thunderbolt/tunnel.c
@@ -1679,6 +1679,34 @@ struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in,
return NULL;
}
+static inline bool tb_port_shared_buffering_possible(const struct tb_port *port)
+{
+ if (!tb_port_is_null(port) || !port->remote)
+ return false;
+ if (!tb_port_use_credit_allocation(port))
+ return false;
+
+ /* Both ends of the link must support it */
+ return port->shared_buffering && port->remote->shared_buffering;
+}
+
+static unsigned int tb_hop_shared_flags(const struct tb_path *path, int i)
+{
+ const struct tb_path_hop *hop = &path->hops[i];
+ unsigned int flags = 0;
+
+ if (tb_port_shared_buffering_possible(hop->in_port))
+ flags |= TB_HOP_ISE;
+ if (i < path->path_length - 1) {
+ const struct tb_path_hop *next = &path->hops[i + 1];
+
+ if (tb_port_shared_buffering_possible(next->in_port))
+ flags |= TB_HOP_ESE;
+ }
+
+ return flags;
+}
+
static int tb_dma_init_path(struct tb_path *path)
{
struct tb_path_hop *hop;
@@ -1696,7 +1724,8 @@ static int tb_dma_init_path(struct tb_path *path)
if (!tb_port_is_nhi(hop->out_port))
flags |= TB_HOP_EFC;
- ret = tb_hop_alloc_credits(hop, TB_CREDITS_DMA, flags);
+ ret = tb_hop_alloc_credits(hop, TB_CREDITS_DMA, flags |
+ tb_hop_shared_flags(path, i));
if (ret)
return ret;
}
--
2.50.1
next prev parent reply other threads:[~2026-11-19 17:19 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 17:12 [PATCH 00/18] thunderbolt: Add support for shared buffering Mika Westerberg
2026-11-19 17:12 ` [PATCH 01/18] thunderbolt: Avoid leaking of DMA tunnel after XDomain removal Mika Westerberg
2026-11-19 17:12 ` [PATCH 02/18] thunderbolt: Tear down DMA tunnels on every " Mika Westerberg
2026-11-19 17:12 ` [PATCH 03/18] thunderbolt: Delay re-pairing DP IN/OUT if DPRX negotiation fails Mika Westerberg
2026-11-19 17:12 ` [PATCH 04/18] thunderbolt: Call DP tunnel activation callback with tb->lock held Mika Westerberg
2026-11-19 17:12 ` [PATCH 05/18] thunderbolt: Re-apply Alpine/Titan Ridge flow on resume Mika Westerberg
2026-11-19 17:12 ` [PATCH 06/18] thunderbolt: Return -ESHUTDOWN when control channel is not running Mika Westerberg
2026-11-19 17:12 ` [PATCH 07/18] thunderbolt: Add usb4_port_hotplug_disable() Mika Westerberg
2026-11-19 17:12 ` [PATCH 08/18] thunderbolt: Move tb_plug_events_active() before tb_switch_reset_host() Mika Westerberg
2026-11-19 17:12 ` [PATCH 09/18] thunderbolt: Add tb_port_state_is_up() Mika Westerberg
2026-11-19 17:12 ` [PATCH 10/18] thunderbolt: Split host router port reset into a separate function Mika Westerberg
2026-11-19 17:12 ` [PATCH 11/18] thunderbolt: Reset topology after suspend-to-disk Mika Westerberg
2026-11-19 17:12 ` [PATCH 12/18] thunderbolt: Drop tunnel discovery without HopID allocation Mika Westerberg
2026-11-19 17:12 ` [PATCH 13/18] thunderbolt: Always take domain lock when tb_tunnel_put() is called Mika Westerberg
2026-11-19 17:12 ` [PATCH 14/18] thunderbolt: Assign domain to the routers in KUnit tests Mika Westerberg
2026-11-19 17:12 ` [PATCH 15/18] thunderbolt: Rework tunnel credit allocation Mika Westerberg
2026-11-19 17:12 ` [PATCH 16/18] thunderbolt: Add support for shared flow control Mika Westerberg
2026-11-19 17:12 ` Mika Westerberg [this message]
2026-11-19 17:12 ` [PATCH 18/18] thunderbolt: Add KUnit tests for shared buffering Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119171232.1616316-18-mika.westerberg@linux.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=gil.fine@linux.intel.com \
--cc=linux-usb@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=pooja.katiyar@intel.com \
--cc=rene.sapiens@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox