messages from 2018-11-08 07:08:40 to 2018-11-14 21:16:43 UTC [more...]
[v2,net-next,06/21] net: usb: aqc111: Introduce link management
2018-11-14 21:16 UTC
HID: add driver for U2F Zero built-in LED and RNG
2018-11-14 19:08 UTC
USB: host: ehci: allow tine of highspeed nak-count
2018-11-14 18:47 UTC
HID: add driver for U2F Zero built-in LED and RNG
2018-11-14 18:32 UTC
USB: host: ehci: allow tine of highspeed nak-count
2018-11-14 17:13 UTC
[v2,RESEND] usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
2018-11-14 16:11 UTC
[4/4] usbnet: smsc95xx: check for csum being in last four bytes
2018-11-14 15:59 UTC
usb: dwc3: drd: fix semicolon.cocci warnings
2018-11-14 15:35 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-14 14:04 UTC
[V6,01/10] usb: gadget: udc: Add timer for stream capable endpoints
2018-11-14 13:57 UTC
[4/4] usbnet: smsc95xx: check for csum being in last four bytes
2018-11-14 11:50 UTC
[3/4] usbnet: smsc95xx: fix memcpy for accessing rx-data
2018-11-14 11:50 UTC
[2/4] usbnet: smsc95xx: simplify tx_fixup code
2018-11-14 11:50 UTC
[1/4] usbnet: smsc95xx: fix rx packet alignment
2018-11-14 11:50 UTC
[v6,2/3] usb: dwc3: Add disabling of start_transfer failure quirk
2018-11-14 11:41 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-14 11:17 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-14 11:05 UTC
usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers
2018-11-14 10:45 UTC
[1/2] Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"
2018-11-14 10:44 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-14 10:20 UTC
[v1,1/5] drivercore: Revert "deferral race condition fix"
2018-11-14 10:19 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-14 9:48 UTC
[PATCHv4] usb: gadget: f_fs: Allow scatter-gather buffers
2018-11-14 9:47 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-14 9:36 UTC
xhci: handle stop ep on invalid CStream
2018-11-14 9:22 UTC
[14/14] usb: dwc3: gadget: check if dep->frame_number is still valid
2018-11-14 9:18 UTC
[13/14] usb: dwc3: gadget: remove unnecessary dev_info()
2018-11-14 9:18 UTC
[12/14] usb: dwc3: trace: log ep commands in hex
2018-11-14 9:18 UTC
[11/14] usb: dwc3: gadget: return errors from __dwc3_gadget_start_isoc()
2018-11-14 9:18 UTC
[10/14] usb: dwc3: gadget: remove wait_end_transfer
2018-11-14 9:18 UTC
[09/14] usb: dwc3: gadget: move requests to cancelled_list
2018-11-14 9:18 UTC
[08/14] usb: dwc3: gadget: introduce cancelled_list
2018-11-14 9:18 UTC
[07/14] usb: dwc3: gadget: extract dwc3_gadget_ep_skip_trbs()
2018-11-14 9:18 UTC
[06/14] usb: dwc3: gadget: use num_trbs when skipping TRBs on ->dequeue()
2018-11-14 9:18 UTC
[05/14] usb: dwc3: gadget: track number of TRBs per request
2018-11-14 9:18 UTC
[04/14] usb: dwc3: gadget: combine unaligned and zero flags
2018-11-14 9:18 UTC
[03/14] usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers
2018-11-14 9:18 UTC
[02/14] usb: dwc3: gadget: Properly check last unaligned/zero chain TRB
2018-11-14 9:18 UTC
[01/14] usb: dwc3: core: Clean up ULPI device
2018-11-14 9:18 UTC
[v2,4/4] usb: dwc3: gadget: check if dep->frame_number is still valid
2018-11-14 9:17 UTC
[v2,3/4] usb: dwc3: gadget: remove unnecessary dev_info()
2018-11-14 9:17 UTC
[v2,2/4] usb: dwc3: trace: log ep commands in hex
2018-11-14 9:17 UTC
[v2,1/4] usb: dwc3: gadget: return errors from __dwc3_gadget_start_isoc()
2018-11-14 9:17 UTC
Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"
2018-11-14 9:14 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-14 9:13 UTC
[4/4] usb: dwc3: gadget: check if dep->frame_number is still valid
2018-11-14 9:11 UTC
[4/4] usb: dwc3: gadget: check if dep->frame_number is still valid
2018-11-14 9:04 UTC
[RESEND,v2] usb: dwc2: disable power_down on rockchip for regression
2018-11-14 9:01 UTC
[v1,1/5] drivercore: Revert "deferral race condition fix"
2018-11-14 8:45 UTC
[4/4] usb: dwc3: gadget: check if dep->frame_number is still valid
2018-11-14 8:41 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-14 8:35 UTC
[v2,net-next,19/21] net: usb: aqc111: Add support for wake on LAN by MAGIC packet
2018-11-14 7:56 UTC
[v2,net-next,18/21] net: usb: aqc111: Implement get/set_link_ksettings callbacks
2018-11-14 7:46 UTC
[v2,net-next,06/21] net: usb: aqc111: Introduce link management
2018-11-14 7:44 UTC
[v1,1/5] drivercore: Revert "deferral race condition fix"
2018-11-14 0:33 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-13 23:52 UTC
[v2] usb: dwc2: host: use hrtimer for NAK retries
2018-11-13 23:30 UTC
[V3,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's
2018-11-13 21:54 UTC
[v2,net-next,19/21] net: usb: aqc111: Add support for wake on LAN by MAGIC packet
2018-11-13 21:02 UTC
[v2,net-next,06/21] net: usb: aqc111: Introduce link management
2018-11-13 20:58 UTC
[v2,net-next,18/21] net: usb: aqc111: Implement get/set_link_ksettings callbacks
2018-11-13 20:50 UTC
[4/4] arm64: dts: exynos: Update DWC3 modules on Exynos5433 SoCs
2018-11-13 19:25 UTC
Improve the accuracy of the baud rate generator by using round-to-closest instead of truncating when calculating baud rate divisors
2018-11-13 19:19 UTC
[v2,2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-13 18:56 UTC
[v2,2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-13 18:11 UTC
[v2,net-next,21/21] net: usb: aqc111: Extend cdc_ether blacklist
2018-11-13 14:45 UTC
[v2,net-next,20/21] net: usb: aqc111: Add ASIX's HW ids
2018-11-13 14:45 UTC
[v2,net-next,19/21] net: usb: aqc111: Add support for wake on LAN by MAGIC packet
2018-11-13 14:45 UTC
[v2,net-next,18/21] net: usb: aqc111: Implement get/set_link_ksettings callbacks
2018-11-13 14:45 UTC
[v2,net-next,17/21] net: usb: aqc111: Initialize ethtool_ops structure
2018-11-13 14:45 UTC
[v2,net-next,16/21] net: usb: aqc111: Add RX VLAN filtering support
2018-11-13 14:45 UTC
[v2,net-next,15/21] net: usb: aqc111: Add support for VLAN_CTAG_TX/RX offload
2018-11-13 14:45 UTC
[v2,net-next,14/21] net: usb: aqc111: Implement set_rx_mode callback
2018-11-13 14:45 UTC
[v2,net-next,13/21] net: usb: aqc111: Add support for TSO
2018-11-13 14:45 UTC
[v2,net-next,12/21] net: usb: aqc111: Add support for enable/disable checksum offload
2018-11-13 14:44 UTC
[v2,net-next,11/21] net: usb: aqc111: Add support for changing MTU
2018-11-13 14:44 UTC
[v2,net-next,10/21] net: usb: aqc111: Add checksum offload support
2018-11-13 14:44 UTC
[v2,net-next,09/21] net: usb: aqc111: Implement RX data path
2018-11-13 14:44 UTC
[v2,net-next,08/21] net: usb: aqc111: Implement TX data path
2018-11-13 14:44 UTC
[v2,net-next,07/21] net: usb: aqc111: Add support for getting and setting of MAC address
2018-11-13 14:44 UTC
[v2,net-next,06/21] net: usb: aqc111: Introduce link management
2018-11-13 14:44 UTC
[v2,net-next,05/21] net: usb: aqc111: Introduce PHY access
2018-11-13 14:44 UTC
[v2,net-next,04/21] net: usb: aqc111: Various callbacks implementation
2018-11-13 14:44 UTC
[v2,net-next,03/21] net: usb: aqc111: Add implementation of read and write commands
2018-11-13 14:44 UTC
[v2,net-next,02/21] net: usb: aqc111: Add bind and empty unbind callbacks
2018-11-13 14:44 UTC
[v2,net-next,01/21] net: usb: aqc111: Driver skeleton for Aquantia AQtion USB to 5GbE
2018-11-13 14:44 UTC
usb: core: Fix hub port connection events lost
2018-11-13 13:55 UTC
usb: core: Fix hub port connection events lost
2018-11-13 13:40 UTC
USB-C device hotplug issue
2018-11-13 13:38 UTC
[PATCHv3] usb: gadget: f_fs: Allow scatter-gather buffers
2018-11-13 13:16 UTC
xhci: handle stop ep on invalid CStream
2018-11-13 6:48 UTC
usb: dwc2: gadget: fix ISOC frame overflow handling
2018-11-12 22:46 UTC
usb: xhci: fix build warning - missing prototype
2018-11-12 20:24 UTC
[v1,1/1] usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove()
2018-11-12 18:11 UTC
[v1,1/5] drivercore: Revert "deferral race condition fix"
2018-11-12 16:11 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-12 15:46 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-12 15:43 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-12 15:40 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-12 11:47 UTC
[v1,4/5] usb: dwc3: drd: Switch to device property for 'extcon' handling
2018-11-12 11:47 UTC
HID: add driver for U2F Zero built-in LED and RNG
2018-11-12 11:17 UTC
[3/3] usb: dwc3: Support option to disable USB2 LPM
2018-11-12 11:06 UTC
[3/3] usb: dwc3: Support option to disable USB2 LPM
2018-11-12 11:03 UTC
[3/3] usb: dwc3: Support option to disable USB2 LPM
2018-11-12 10:45 UTC
USB: serial: mos7840: Add a product ID for the new product
2018-11-12 10:40 UTC
Improve the accuracy of the baud rate generator by using round-to-closest instead of truncating when calculating baud rate divisors
2018-11-12 9:54 UTC
[-next] USB: serial: mos7840: remove set but not used variables 'st, data1, iflag'
2018-11-12 9:35 UTC
Add support of TI ICDI to USB simple serial device
2018-11-12 9:17 UTC
[-next] USB: serial: quatech2: remove set but not used variable 'port_priv'
2018-11-12 9:09 UTC
[06/10] phy: Add usb phy support for hi3660 Soc of Hisilicon
2018-11-12 9:09 UTC
usb: dwc2: gadget: fix ISOC frame overflow handling
2018-11-12 8:53 UTC
[6/6] xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc
2018-11-12 8:21 UTC
[5/6] usb: xhci: fix timeout for transition from RExit to U0
2018-11-12 8:21 UTC
[4/6] usb: xhci: fix uninitialized completion when USB3 port got wrong status
2018-11-12 8:21 UTC
[3/6] xhci: Add check for invalid byte size error when UAS devices are connected
2018-11-12 8:21 UTC
[2/6] xhci: handle port status events for removed USB3 hcd
2018-11-12 8:21 UTC
[1/6] xhci: Fix leaking USB3 shared_hcd at xhci removal
2018-11-12 8:21 UTC
USB: serial: mos7840: Add a product ID for the new product
2018-11-12 7:16 UTC
[3/3] usb: dwc3: Support option to disable USB2 LPM
2018-11-12 5:29 UTC
[4/4] usb: dwc3: gadget: check if dep->frame_number is still valid
2018-11-12 5:14 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-12 0:24 UTC
[v6,2/3] usb: dwc3: Add disabling of start_transfer failure quirk
2018-11-11 22:32 UTC
[v1,1/5] drivercore: Revert "deferral race condition fix"
2018-11-11 11:45 UTC
[3.16] staging: usbip stub_rx fix static checker warning on unnecessary checks
2018-11-11 1:33 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-11 0:06 UTC
[v1,3/5] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
2018-11-10 18:40 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-10 18:39 UTC
[v1,1/5] drivercore: Revert "deferral race condition fix"
2018-11-10 18:36 UTC
[v1,1/5] drivercore: Revert "deferral race condition fix"
2018-11-10 18:26 UTC
[v1,5/5] usb: dwc3: drd: Add support for DR detection through extcon
2018-11-10 18:11 UTC
[v1,4/5] usb: dwc3: drd: Switch to device property for 'extcon' handling
2018-11-10 18:11 UTC
[v1,3/5] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
2018-11-10 18:10 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-10 18:10 UTC
[v1,1/5] drivercore: Revert "deferral race condition fix"
2018-11-10 18:10 UTC
[v2,2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-10 10:39 UTC
usb: dwc3: don't log probe deferrals; but do log other error codes
2018-11-10 10:00 UTC
[V4,5/5] usb: host: Add ability to build new Broadcom STB USB drivers
2018-11-10 5:48 UTC
usb: host: fix platform_no_drv_owner.cocci warnings
2018-11-10 5:48 UTC
USB: remove the unused struct hcd_timeout definition
2018-11-09 19:07 UTC
usb: dwc2: gadget: fix ISOC frame overflow handling
2018-11-09 18:42 UTC
[v15,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-11-09 18:40 UTC
USB: remove the unused struct hcd_timeout definition
2018-11-09 18:39 UTC
[v15,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-11-09 18:28 UTC
[v15,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-11-09 18:04 UTC
[v15,2/2] usb: typec: ucsi: add support for Cypress CCGx
2018-11-09 17:54 UTC
[v15,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-11-09 17:54 UTC
[v15,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-11-09 17:27 UTC
[v15,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-11-09 16:49 UTC
[v15,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
2018-11-09 16:43 UTC
[v2,2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-09 15:30 UTC
usb: dwc2: gadget: fix ISOC frame overflow handling
2018-11-09 14:36 UTC
[V4,5/5] usb: host: Add ability to build new Broadcom STB USB drivers
2018-11-09 14:02 UTC
[V4,4/5] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
2018-11-09 14:01 UTC
[V4,3/5] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
2018-11-09 14:01 UTC
[V4,2/5] usb: core: Add ability to skip phy exit on suspend and init on resume
2018-11-09 14:01 UTC
[V4,1/5] dt-bindings: Add Broadcom STB USB support
2018-11-09 14:01 UTC
USB-C device hotplug issue
2018-11-09 13:47 UTC
[PATCHv2] usb: gadget: f_fs: Allow scatter-gather buffers
2018-11-09 13:26 UTC
usb: gadget: f_fs: Allow scatter-gather buffers
2018-11-09 12:33 UTC
[3/3] usb: dwc3: Support option to disable USB2 LPM
2018-11-09 11:58 UTC
usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device
2018-11-09 11:44 UTC
[stable,netdev,4.4+] lan78xx: make sure RX_ADDRL & RX_ADDRH regs are always up to date
2018-11-09 11:31 UTC
[4/4] usb: dwc3: gadget: check if dep->frame_number is still valid
2018-11-09 11:03 UTC
[4/4] usb: dwc3: gadget: check if dep->frame_number is still valid
2018-11-09 11:00 UTC
[1/3] usb: dwc3: Add reference clock properties
2018-11-09 8:54 UTC
usb: dwc2: gadget: fix ISOC frame overflow handling
2018-11-09 8:43 UTC
[v2,2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-09 7:53 UTC
[1/3] usb: dwc3: Add reference clock properties
2018-11-09 7:45 UTC
[4/4] usb: dwc3: gadget: check if dep->frame_number is still valid
2018-11-09 7:39 UTC
[1/3] usb: dwc3: Add reference clock properties
2018-11-09 7:14 UTC
[4/4] usb: dwc3: gadget: check if dep->frame_number is still valid
2018-11-09 7:11 UTC
net: smsc95xx: Fix MTU range
2018-11-09 3:55 UTC
[4/4] usb: dwc3: gadget: check if dep->frame_number is still valid
2018-11-08 20:33 UTC
[v6,3/3] usb: dwc3: Add workaround for isoc start transfer failure
2018-11-08 20:07 UTC
[v6,2/3] usb: dwc3: Add disabling of start_transfer failure quirk
2018-11-08 20:06 UTC
[v6,1/3] usb: dwc3: Track DWC_usb31 VERSIONTYPE
2018-11-08 20:06 UTC
[1/3] usb: dwc3: Add reference clock properties
2018-11-08 19:51 UTC
[v5,1/3] usb: dwc3: Track DWC_usb31 VERSIONTYPE
2018-11-08 19:41 UTC
[v2,2/2] usb: dwc3: gadget: Report isoc scheduled frame number
2018-11-08 19:40 UTC
[1/2] usb: gadget: Add start_frame to usb_request
2018-11-08 19:38 UTC
net: smsc95xx: Fix MTU range
2018-11-08 19:38 UTC
usb: dwc2: gadget: fix ISOC frame overflow handling
2018-11-08 17:36 UTC
[stable,netdev,4.4+] lan78xx: make sure RX_ADDRL & RX_ADDRH regs are always up to date
2018-11-08 15:49 UTC
[RFC,v1,14/14] usb:cdns3: Feature for changing role
2018-11-08 14:22 UTC
usb: gadget: fix spelling mistakeis "[En]queing" -> "[En]queuing"
2018-11-08 14:19 UTC
[3/3] usb: dwc3: Support option to disable USB2 LPM
2018-11-08 12:22 UTC
[RFC,v1,13/14] usb:cdns3: Adds debugging function
2018-11-08 12:03 UTC
[RFC,v1,14/14] usb:cdns3: Feature for changing role
2018-11-08 11:51 UTC
[RFC,v1,03/14] usb:cdns3: Driver initialization code
2018-11-08 11:38 UTC
[RFC,v1,04/14] usb:cdns3: Added DRD support
2018-11-08 11:33 UTC
HID: Add quirk for Microsoft PIXART OEM mouse
2018-11-08 11:09 UTC
[stable,netdev,4.4+] lan78xx: make sure RX_ADDRL & RX_ADDRH regs are always up to date
2018-11-08 11:01 UTC
[3/3] usb: dwc3: Support option to disable USB2 LPM
2018-11-08 10:58 UTC
[3/3] usb: dwc3: Support option to disable USB2 LPM
2018-11-08 10:48 UTC
[3/3] usb: dwc3: Support option to disable USB2 LPM
2018-11-08 10:47 UTC
[RFC,v1,13/14] usb:cdns3: Adds debugging function
2018-11-08 9:34 UTC
[3/3] usb: dwc3: Support option to disable USB2 LPM
2018-11-08 8:25 UTC
[1/3] usb: dwc3: Add reference clock properties
2018-11-08 7:17 UTC
[v5,1/3] usb: dwc3: Track DWC_usb31 VERSIONTYPE
2018-11-08 7:10 UTC
[v2,2/2] usb: dwc3: gadget: Report isoc scheduled frame number
2018-11-08 7:08 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).