messages from 2018-11-14 21:16:43 to 2018-11-26 09:32:59 UTC [more...]
[v4,net-next,01/21] net: usb: aqc111: Driver skeleton for Aquantia AQtion USB to 5GbE
2018-11-26 9:32 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-26 8:39 UTC
[v2,RESEND] usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
2018-11-26 8:27 UTC
[RFC,v2,06/15] usb:cdns3: Adds Host support
2018-11-26 8:24 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-26 8:07 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-26 7:23 UTC
usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series
2018-11-25 16:57 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-11-25 12:35 UTC
[RFC,v2,03/15] dt-bindings: add binding for USBSS-DRD controller
2018-11-25 7:33 UTC
[v2,5/5] USB: omap_udc: fix rejection of out transfers when DMA is used
2018-11-24 22:17 UTC
[v2,4/5] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-11-24 22:17 UTC
[v2,3/5] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-11-24 22:17 UTC
[v2,2/5] USB: omap_udc: fix crashes on probe error and module removal
2018-11-24 22:17 UTC
[v2,1/5] USB: omap_udc: use devm_request_irq()
2018-11-24 22:17 UTC
dma: cppi41: delete channel from pending list when stop channel
2018-11-24 14:28 UTC
USB: usb-storage: Add new IDs to ums-realtek
2018-11-23 20:38 UTC
[5/6] media: docs: brainless mass add SPDX headers to all media files
2018-11-23 18:38 UTC
[2/2] phy: mapphone-mdm6600: Improve phy related runtime PM calls
2018-11-23 16:58 UTC
[v3] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-23 16:24 UTC
usb: misc: fix boolconv.cocci warnings
2018-11-23 15:29 UTC
usb: misc: fix boolconv.cocci warnings
2018-11-23 15:10 UTC
[v2] USB: Don't enable LPM if it's already enabled
2018-11-23 15:08 UTC
USB: Disable USB2 LPM at shutdown
2018-11-23 15:06 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-23 14:51 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-11-23 14:43 UTC
[v2] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-23 14:39 UTC
[RFC,v2,06/15] usb:cdns3: Adds Host support
2018-11-23 14:23 UTC
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
2018-11-23 13:07 UTC
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
2018-11-23 12:51 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-11-23 11:35 UTC
[3/3] ARM64: dts: marvell: armada-3720-espressobin: declare USB3 PHY
2018-11-23 11:22 UTC
[2/3] usb: host: xhci: mvebu: add reset on resume quirk
2018-11-23 11:22 UTC
[1/3] usb: core: comply to PHY framework
2018-11-23 11:22 UTC
[v2] phy: phy-pxa-usb: add a new driver
2018-11-23 11:13 UTC
[RFC,v2,03/15] dt-bindings: add binding for USBSS-DRD controller
2018-11-23 10:53 UTC
[RFC,v2,01/15] usb:cdns3: add pci to platform driver wrapper
2018-11-23 10:44 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-11-23 9:49 UTC
[v2] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-23 9:29 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-23 9:04 UTC
[v3,net-next,13/21] net: usb: aqc111: Add support for TSO
2018-11-23 8:58 UTC
[v2] USB: serial: ftdi_sio: Use rounding instead of truncating when calculating baud rate divisors
2018-11-23 8:53 UTC
USB: usb-storage: Add new IDs to ums-realtek
2018-11-23 8:42 UTC
[2/2] phy: mapphone-mdm6600: Improve phy related runtime PM calls
2018-11-23 7:59 UTC
USB: Disable USB2 LPM at shutdown
2018-11-23 6:04 UTC
[v2] USB: Don't enable LPM if it's already enabled
2018-11-23 6:03 UTC
[v2] USB: serial: ftdi_sio: Use rounding instead of truncating when calculating baud rate divisors
2018-11-22 20:27 UTC
[v3,net-next,13/21] net: usb: aqc111: Add support for TSO
2018-11-22 19:17 UTC
[v3,net-next,10/21] net: usb: aqc111: Add checksum offload support
2018-11-22 19:14 UTC
[v3,net-next,09/21] net: usb: aqc111: Implement RX data path
2018-11-22 19:12 UTC
[v3,net-next,08/21] net: usb: aqc111: Implement TX data path
2018-11-22 19:07 UTC
Support Mac address pass through on Dell DS1000 dock
2018-11-22 17:15 UTC
[PATCHv3] USB: serial: mos7840: Add a product ID for the new product
2018-11-22 8:00 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-11-22 6:53 UTC
[v2] xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-22 4:23 UTC
[v3,5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
2018-11-21 23:50 UTC
[v3,4/5] Bluetooth: btusb: Collect the common Intel assignments together
2018-11-21 23:50 UTC
[v3,3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts
2018-11-21 23:50 UTC
[v3,2/5] usb: assign ACPI companions for embedded USB devices
2018-11-21 23:50 UTC
[v3,1/5] usb: split code locating ACPI companion into port and device
2018-11-21 23:50 UTC
usb: misc: fix boolconv.cocci warnings
2018-11-21 17:33 UTC
[v2] usb: dwc2: host: use hrtimer for NAK retries
2018-11-21 16:11 UTC
usb: dwc2: Revert "usb: dwc2: Disable all EP's on disconnect"
2018-11-21 15:45 UTC
[v2,2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-21 12:42 UTC
[v3,net-next,21/21] net: usb: aqc111: Extend cdc_ether blacklist
2018-11-21 10:14 UTC
[v3,net-next,20/21] net: usb: aqc111: Add ASIX's HW ids
2018-11-21 10:14 UTC
[v3,net-next,19/21] net: usb: aqc111: Add support for wake on LAN by MAGIC packet
2018-11-21 10:14 UTC
[v3,net-next,18/21] net: usb: aqc111: Implement get/set_link_ksettings callbacks
2018-11-21 10:14 UTC
[v3,net-next,17/21] net: usb: aqc111: Initialize ethtool_ops structure
2018-11-21 10:13 UTC
[v3,net-next,16/21] net: usb: aqc111: Add RX VLAN filtering support
2018-11-21 10:13 UTC
[v3,net-next,15/21] net: usb: aqc111: Add support for VLAN_CTAG_TX/RX offload
2018-11-21 10:13 UTC
[v3,net-next,14/21] net: usb: aqc111: Implement set_rx_mode callback
2018-11-21 10:13 UTC
[v3,net-next,13/21] net: usb: aqc111: Add support for TSO
2018-11-21 10:13 UTC
[v3,net-next,12/21] net: usb: aqc111: Add support for enable/disable checksum offload
2018-11-21 10:13 UTC
[v3,net-next,11/21] net: usb: aqc111: Add support for changing MTU
2018-11-21 10:13 UTC
[v3,net-next,10/21] net: usb: aqc111: Add checksum offload support
2018-11-21 10:13 UTC
[v3,net-next,09/21] net: usb: aqc111: Implement RX data path
2018-11-21 10:13 UTC
[v3,net-next,08/21] net: usb: aqc111: Implement TX data path
2018-11-21 10:13 UTC
[v3,net-next,07/21] net: usb: aqc111: Add support for getting and setting of MAC address
2018-11-21 10:13 UTC
[v3,net-next,06/21] net: usb: aqc111: Introduce link management
2018-11-21 10:13 UTC
[v3,net-next,05/21] net: usb: aqc111: Introduce PHY access
2018-11-21 10:13 UTC
[v3,net-next,04/21] net: usb: aqc111: Various callbacks implementation
2018-11-21 10:13 UTC
[v3,net-next,03/21] net: usb: aqc111: Add implementation of read and write commands
2018-11-21 10:13 UTC
[v3,net-next,02/21] net: usb: aqc111: Add bind and empty unbind callbacks
2018-11-21 10:13 UTC
[v3,net-next,01/21] net: usb: aqc111: Driver skeleton for Aquantia AQtion USB to 5GbE
2018-11-21 10:13 UTC
[v2] usb: dwc2: host: use hrtimer for NAK retries
2018-11-21 7:16 UTC
usb: dwc2: Disable power down feature on Samsung SoCs
2018-11-21 7:16 UTC
[2/2] usb: renesas_usbhs: Use SIMPLE_DEV_PM_OPS macro
2018-11-21 6:31 UTC
[1/2] usb: renesas_usbhs: Remove dummy runtime PM callbacks
2018-11-21 6:31 UTC
[V1,1/1] USB: serial: f81534: fix reading old/new IC config
2018-11-20 17:29 UTC
[v2] USB: serial: ftdi_sio: Improve the accuracy of the baud rate generator by using round-to-closest instead of truncating when calculating baud rate divisors
2018-11-20 16:55 UTC
usb: dwc2: Disable power down feature on Samsung SoCs
2018-11-20 15:38 UTC
[v3] usb: hub: add retry routine after intr URB submit error
2018-11-20 15:17 UTC
[v3] usb: hub: add retry routine after intr URB submit error
2018-11-20 15:12 UTC
[v3] usb: hub: add retry routine after intr URB submit error
2018-11-20 14:57 UTC
[v2,1/3] usb: misc: add driver for FT232H based FPGA configuration devices
2018-11-20 14:49 UTC
xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-20 14:42 UTC
[v3] usb: hub: add retry routine after intr URB submit error
2018-11-20 14:34 UTC
HID: Add quirk for Primax PIXART OEM mice
2018-11-20 12:08 UTC
xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-20 10:34 UTC
[v2] usb: hub: add retry routine after intr URB sumbit error
2018-11-20 7:18 UTC
HID: Add quirk for Primax PIXART OEM mice
2018-11-20 6:25 UTC
[v2,1/3] usb: misc: add driver for FT232H based FPGA configuration devices
2018-11-20 0:56 UTC
[v2,3/3] fpga: Add fpga manager driver for ARRI Altera FPP
2018-11-20 0:28 UTC
[v2,2/3] spi: add FTDI MPSSE SPI controller driver
2018-11-20 0:28 UTC
[v2,1/3] usb: misc: add driver for FT232H based FPGA configuration devices
2018-11-20 0:28 UTC
[v2,5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
2018-11-19 23:04 UTC
[v2,4/5] Bluetooth: btusb: Collect the common Intel assignments together
2018-11-19 23:04 UTC
[v2,3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts
2018-11-19 23:04 UTC
[v2,2/5] usb: assign ACPI companions for embedded USB devices
2018-11-19 23:04 UTC
[v2,1/5] usb: split code locating ACPI companion into port and device
2018-11-19 23:04 UTC
USB: ene_usb6250: add missing indentation
2018-11-19 16:43 UTC
drivers: usb: early: clean up indentation, remove extraneous tabs
2018-11-19 16:34 UTC
[v2] usb: hub: add retry routine after intr URB sumbit error
2018-11-19 15:52 UTC
usb: gadget: u_ether: fix unsafe list iteration
2018-11-19 15:49 UTC
[1/2] phy: core: Add phy_pm_runtime_enabled
2018-11-19 14:46 UTC
[v2] usb: hub: add retry routine after intr URB sumbit error
2018-11-19 14:04 UTC
[v2] usb: hub: add retry routine after intr URB sumbit error
2018-11-19 14:02 UTC
USB: host: ehci: allow tine of highspeed nak-count
2018-11-19 10:06 UTC
usbnet: use tasklet_init() for usbnet_bh handler
2018-11-19 9:41 UTC
usb: hub: add I/O error retry & reset routine
2018-11-19 9:20 UTC
Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid"
2018-11-19 6:40 UTC
[4/4] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
2018-11-18 19:59 UTC
[3/4] USB: omap_udc: fix omap_udc_start() on 15xx machines
2018-11-18 19:59 UTC
[2/4] USB: omap_udc: fix crashes on probe error and module removal
2018-11-18 19:59 UTC
[1/4] USB: omap_udc: use devm_request_irq()
2018-11-18 19:59 UTC
[RFC,v2,15/15] usb:cdns3: Feature for changing role
2018-11-18 10:09 UTC
[RFC,v2,14/15] usb:cdns3: Adds debugging function
2018-11-18 10:09 UTC
[RFC,v2,13/15] usb:cdns3: Adds transfer related function
2018-11-18 10:09 UTC
[RFC,v2,12/15] usb:cdns3: Adds enumeration related function
2018-11-18 10:09 UTC
[RFC,v2,11/15] usb:cdns3: Implements ISR functionality
2018-11-18 10:09 UTC
[RFC,v2,10/15] usb:cdns3: Ep0 operations part of the API
2018-11-18 10:09 UTC
[RFC,v2,09/15] usb:cdns3: EpX operations part of the API
2018-11-18 10:09 UTC
[RFC,v2,08/15] usb:cdns3: Implements device operations part of the API
2018-11-18 10:09 UTC
[RFC,v2,07/15] usb:cdns3: Adds Device mode support - initialization
2018-11-18 10:09 UTC
[RFC,v2,06/15] usb:cdns3: Adds Host support
2018-11-18 10:09 UTC
[RFC,v2,05/15] usb:cdns3: Added DRD support
2018-11-18 10:09 UTC
[RFC,v2,04/15] usb:cdns3: Driver initialization code
2018-11-18 10:09 UTC
[RFC,v2,03/15] dt-bindings: add binding for USBSS-DRD controller
2018-11-18 10:08 UTC
[RFC,v2,02/15] usb:cdns3: Device side header file
2018-11-18 10:08 UTC
[RFC,v2,01/15] usb:cdns3: add pci to platform driver wrapper
2018-11-18 10:08 UTC
[1/2] phy: core: Add phy_pm_runtime_enabled
2018-11-17 15:43 UTC
[1/2] phy: core: Add phy_pm_runtime_enabled
2018-11-17 15:38 UTC
[v3,1/2] dt-bindings: Documentation for qcom,eud
2018-11-17 14:47 UTC
[2/2] phy: mapphone-mdm6600: Improve phy related runtime PM calls
2018-11-17 13:37 UTC
[1/2] phy: core: Add phy_pm_runtime_enabled
2018-11-17 13:37 UTC
HID: add driver for U2F Zero built-in LED and RNG
2018-11-17 10:19 UTC
HID: add driver for U2F Zero built-in LED and RNG
2018-11-17 9:53 UTC
[01/10] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs
2018-11-17 2:29 UTC
[5/5] Bluetooth: btusb: Use the hw_reset method to allow resetting the BT chip
2018-11-17 1:07 UTC
[4/5] Bluetooth: btusb: Collect the common Intel assignments together
2018-11-17 1:07 UTC
[3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts
2018-11-17 1:07 UTC
[2/5] usb: assign ACPI companions for embedded USB devices
2018-11-17 1:07 UTC
[1/5] usb: split code locating ACPI companion into port and device
2018-11-17 1:07 UTC
[v2] USB: serial: ftdi_sio: Improve the accuracy of the baud rate generator by using round-to-closest instead of truncating when calculating baud rate divisors
2018-11-16 21:44 UTC
[v2,net-next,06/21] net: usb: aqc111: Introduce link management
2018-11-16 18:33 UTC
[v2,RESEND] usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
2018-11-16 17:01 UTC
usb: hub: add I/O error retry & reset routine
2018-11-16 16:21 UTC
usbnet: use tasklet_init() for usbnet_bh handler
2018-11-16 15:50 UTC
USB: host: ehci: allow tine of highspeed nak-count
2018-11-16 15:38 UTC
USB: host: ehci: allow tine of highspeed nak-count
2018-11-16 12:53 UTC
usb: hub: add I/O error retry & reset routine
2018-11-16 10:49 UTC
USB: serial: mos7840: Add a product ID for the new product
2018-11-16 9:55 UTC
[v2,net-next,06/21] net: usb: aqc111: Introduce link management
2018-11-16 9:53 UTC
Improve the accuracy of the baud rate generator by using round-to-closest instead of truncating when calculating baud rate divisors
2018-11-16 9:33 UTC
xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-16 8:35 UTC
xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
2018-11-16 8:21 UTC
USB: serial: mos7840: Add a product ID for the new product
2018-11-16 6:36 UTC
[v3,2/2] usb: dwc3: gadget: Report isoc transfer frame number
2018-11-16 3:03 UTC
[v3,1/2] usb: gadget: Introduce frame_number to usb_request
2018-11-16 3:03 UTC
[v3,2/2] Embedded USB Debugger (EUD) driver
2018-11-15 23:09 UTC
[v3,2/2] Embedded USB Debugger (EUD) driver
2018-11-15 23:06 UTC
[v3,2/2] Embedded USB Debugger (EUD) driver
2018-11-15 19:32 UTC
[v3,1/2] dt-bindings: Documentation for qcom,eud
2018-11-15 19:32 UTC
usb: hub: add I/O error retry & reset routine
2018-11-15 19:24 UTC
usb: hub: add I/O error retry & reset routine
2018-11-15 17:14 UTC
[v2,1/3] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
2018-11-15 14:53 UTC
Improve the accuracy of the baud rate generator by using round-to-closest instead of truncating when calculating baud rate divisors
2018-11-15 14:16 UTC
usb: dwc3: don't print error message on probe defer
2018-11-15 14:09 UTC
[v2,3/3] usb: dwc3: drd: Add support for DR detection through extcon
2018-11-15 13:16 UTC
[v2,2/3] usb: dwc3: drd: Switch to device property for 'extcon' handling
2018-11-15 13:16 UTC
[v2,1/3] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
2018-11-15 13:16 UTC
Improve the accuracy of the baud rate generator by using round-to-closest instead of truncating when calculating baud rate divisors
2018-11-15 12:46 UTC
[1/1] xhci: Prevent bus suspend if a port connect change or polling state is detected
2018-11-15 9:38 UTC
Improve the accuracy of the baud rate generator by using round-to-closest instead of truncating when calculating baud rate divisors
2018-11-15 8:24 UTC
[v2,RESEND] usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
2018-11-15 8:09 UTC
[1/2] usb: gadget: Add start_frame to usb_request
2018-11-15 7:41 UTC
[1/2] usb: gadget: Add start_frame to usb_request
2018-11-15 7:15 UTC
[v6,2/3] usb: dwc3: Add disabling of start_transfer failure quirk
2018-11-15 7:00 UTC
[v7,2/2] usb: dwc3: Add workaround for isoc start transfer failure
2018-11-15 6:56 UTC
[v7,1/2] usb: dwc3: Add disabling of start_transfer failure quirk
2018-11-15 6:56 UTC
[V1,1/1] USB: serial: f81534: fix reading old/new IC config
2018-11-15 2:58 UTC
[v1,2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
2018-11-15 1:16 UTC
[v2,net-next,06/21] net: usb: aqc111: Introduce link management
2018-11-14 22:53 UTC
[AUTOSEL,4.9,04/13] usbnet: smsc95xx: disable carrier check while suspending
2018-11-14 22:25 UTC
[AUTOSEL,4.14,26/27] net: smsc95xx: Fix MTU range
2018-11-14 22:25 UTC
[AUTOSEL,4.14,05/27] usbnet: smsc95xx: disable carrier check while suspending
2018-11-14 22:24 UTC
[AUTOSEL,4.18,52/59] net: smsc95xx: Fix MTU range
2018-11-14 22:23 UTC
[AUTOSEL,4.18,11/59] usbnet: smsc95xx: disable carrier check while suspending
2018-11-14 22:22 UTC
[v2,net-next,19/21] net: usb: aqc111: Add support for wake on LAN by MAGIC packet
2018-11-14 21:30 UTC
[v2,net-next,06/21] net: usb: aqc111: Introduce link management
2018-11-14 21:16 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).