* [PATCH v3] USB: serial: option: add Compal EXM-G1x support
@ 2026-08-31 8:44 Ian Lin
2026-09-03 15:48 ` Johan Hovold
0 siblings, 1 reply; 2+ messages in thread
From: Ian Lin @ 2026-08-31 8:44 UTC (permalink / raw)
To: Johan Hovold; +Cc: Greg Kroah-Hartman, linux-usb, linux-kernel, Ian Lin
The Compal EXM-G1x is a Qualcomm SDX12-based LTE modem. Add support for
its vendor-specific serial interfaces with protocols 0x30, 0x40, and
0x60.
Relevant output from usb-devices:
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=04b7 ProdID=8217 Rev=05.04
S: Manufacturer=COMPAL
S: Product=EXM-G1x
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
Tested on a Compal EXM-G1x modem.
Assisted-by: Codex:GPT-5
Signed-off-by: Ian Lin <jisayme@gmail.com>
---
v3:
- base on usb-next
- add AI assistance attribution
- post as a fresh thread
v2: https://lore.kernel.org/20260828082645.13018-1-jisayme@gmail.com/
- split USB serial support into a separate patch
- identify the Qualcomm SDX12 chipset and include usb-devices output
- keep the device entries sorted and add the product name
v1: https://lore.kernel.org/20260828075644.6228-1-jisayme@gmail.com/
drivers/usb/serial/option.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index fd8f96294..8713f8b93 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2541,6 +2541,9 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, UNISOC_PRODUCT_UIS7720, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x04b7, 0x8217, 0xff, 0xff, 0x30) }, /* Compal EXM-G1x */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x04b7, 0x8217, 0xff, 0xff, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x04b7, 0x8217, 0xff, 0xff, 0x60) },
{ USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0530, 0xff), /* TCL IK512 MBIM */
.driver_info = NCTRL(1) },
{ USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0640, 0xff), /* TCL IK512 ECM */
base-commit: 15734de99517b0c81a1a5a3bccaff4593ef8d953
--
2.43.0
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH v3] USB: serial: option: add Compal EXM-G1x support
2026-08-31 8:44 [PATCH v3] USB: serial: option: add Compal EXM-G1x support Ian Lin
@ 2026-09-03 15:48 ` Johan Hovold
0 siblings, 0 replies; 2+ messages in thread
From: Johan Hovold @ 2026-09-03 15:48 UTC (permalink / raw)
To: Ian Lin; +Cc: Greg Kroah-Hartman, linux-usb, linux-kernel
On Mon, Aug 31, 2026 at 04:44:05PM +0800, Ian Lin wrote:
> The Compal EXM-G1x is a Qualcomm SDX12-based LTE modem. Add support for
> its vendor-specific serial interfaces with protocols 0x30, 0x40, and
> 0x60.
>
> Relevant output from usb-devices:
>
> T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0
> D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
> P: Vendor=04b7 ProdID=8217 Rev=05.04
> S: Manufacturer=COMPAL
> S: Product=EXM-G1x
> C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
> I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
>
> Tested on a Compal EXM-G1x modem.
>
> Assisted-by: Codex:GPT-5
> Signed-off-by: Ian Lin <jisayme@gmail.com>
> ---
> v3:
> - base on usb-next
> - add AI assistance attribution
> - post as a fresh thread
> v2: https://lore.kernel.org/20260828082645.13018-1-jisayme@gmail.com/
> - split USB serial support into a separate patch
> - identify the Qualcomm SDX12 chipset and include usb-devices output
> - keep the device entries sorted and add the product name
> v1: https://lore.kernel.org/20260828075644.6228-1-jisayme@gmail.com/
Thanks for the update, now applied.
Johan
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-09-03 15:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-08-31 8:44 [PATCH v3] USB: serial: option: add Compal EXM-G1x support Ian Lin
2026-09-03 15:48 ` Johan Hovold
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox