From: bugzilla-daemon@kernel.org
To: linux-usb@vger.kernel.org
Subject: [Bug 222071] [Bisected] [Regression] xhci_hcd: Resuming from hibernation fails with "Not enough host resources"
Date: Tue, 29 Sep 2026 18:44:17 +0000 [thread overview]
Message-ID: <bug-222071-208809-BF2h3UpMOn@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-222071-208809@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=222071
--- Comment #5 from Harald Judt (h.judt@gmx.at) ---
Thanks for the patch, I've gave it a quick test and after 4-5 hibernate/resume
cycles it looked good at first, but then similar symptoms. Though, the error
message changed, so something else might still be missing?
Also note the Suspend Save Error, I believe I have already seen this in
dmesg-7.1.1.
[ 487.224692] Freezing remaining freezable tasks
[ 487.225435] Freezing remaining freezable tasks completed (elapsed 0.000
seconds)
[ 490.706989] PM: hibernation: Preallocating image memory
[ 491.227735] PM: hibernation: Allocated 1677392 pages for snapshot
[ 491.227739] PM: hibernation: Allocated 6709568 kbytes in 0.52 seconds
(12903.01 MB/s)
[ 491.227742] printk: Suspending console(s) (use no_console_suspend to debug)
[ 491.230837] serial 00:00: disabled
[ 491.249637] xhci_hcd 0000:09:00.0: Suspend Save Error (SRE), USBSTS
0x00000401
[ 491.620480] amdgpu 0000:03:00.0: MODE1 reset
[ 491.620485] amdgpu 0000:03:00.0: GPU mode1 reset
[ 491.620532] amdgpu 0000:03:00.0: GPU smu mode1 reset
[ 492.125327] Disabling non-boot CPUs ...
[ 492.126636] smpboot: CPU 7 is now offline
[ 492.128437] smpboot: CPU 6 is now offline
[ 492.130144] smpboot: CPU 5 is now offline
[ 492.132100] smpboot: CPU 4 is now offline
[...]
Now the new messages:
[ 493.491022] xhci_hcd 0000:00:14.0: Not enough bandwidth on HS bus for newly
activated TT.
[ 493.491024] xhci_hcd 0000:00:14.0: Not enough bandwidth
[ 493.491027] usb 2-1.1.1: Busted HC? Not enough HCD resources for old
configuration.
[ 493.563490] usb 2-1.1.2: reset full-speed USB device number 5 using xhci_hcd
[ 493.637648] usb 2-1.1.2: device descriptor read/64, error -32
[ 493.823352] xhci_hcd 0000:00:14.0: Not enough bandwidth on HS bus for newly
activated TT.
[ 493.823354] xhci_hcd 0000:00:14.0: Not enough bandwidth
[ 493.823357] usb 2-1.1.2: Busted HC? Not enough HCD resources for old
configuration.
[ 493.827971] OOM killer enabled.
[ 493.827973] Restarting tasks: Starting
[ 493.829006] Restarting tasks: Done
[ 493.829020] PM: hibernation: hibernation exit
[ 493.829329] usb 2-1.1.1: USB disconnect, device number 4
[ 494.005427] usb 2-1.1.1: new full-speed USB device number 6 using xhci_hcd
[ 494.091135] xhci_hcd 0000:00:14.0: Not enough bandwidth on HS bus for newly
activated TT.
[ 494.091139] xhci_hcd 0000:00:14.0: Not enough bandwidth
[ 494.091142] usb 2-1.1.1: can't set config #1, error -12
[ 494.091830] usb 2-1.1.2: USB disconnect, device number 5
[ 494.172431] usb 2-1.1.2: new full-speed USB device number 7 using xhci_hcd
[ 494.245591] usb 2-1.1.2: device descriptor read/64, error -32
[ 494.431958] xhci_hcd 0000:00:14.0: Not enough bandwidth on HS bus for newly
activated TT.
[ 494.431963] xhci_hcd 0000:00:14.0: Not enough bandwidth
[ 494.431967] usb 2-1.1.2: can't set config #1, error -12
[ 494.619736] ntfs: volume version 3.1, dev sdc1, cluster size 4096
--
You may reply to this email to add a comment.
You are receiving this mail because:
You are watching the assignee of the bug.
next prev parent reply other threads:[~2026-09-29 18:44 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-29 8:10 [Bug 222071] New: [Bisected] [Regression] xhci_hcd: Resuming from hibernation fails with "Not enough host resources" bugzilla-daemon
2026-09-29 8:19 ` [Bug 222071] " bugzilla-daemon
2026-09-29 10:47 ` bugzilla-daemon
2026-09-29 17:17 ` bugzilla-daemon
2026-09-29 17:19 ` bugzilla-daemon
2026-09-29 18:44 ` bugzilla-daemon [this message]
2026-09-29 18:46 ` bugzilla-daemon
2026-09-29 20:26 ` bugzilla-daemon
2026-09-30 6:45 ` bugzilla-daemon
2026-09-30 7:49 ` bugzilla-daemon
2026-09-30 9:25 ` bugzilla-daemon
2026-10-01 13:25 ` bugzilla-daemon
2026-10-01 23:29 ` bugzilla-daemon
2026-10-06 10:19 ` bugzilla-daemon
2026-10-06 12:14 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-222071-208809-BF2h3UpMOn@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox