* [Bug 222296] New: HID sub-device (wheel rim) hot-swap on Ardor Le Mans base does not re-probe the keyboard interface
@ 2026-11-19 13:33 bugzilla-daemon
2026-11-19 13:34 ` [Bug 222296] " bugzilla-daemon
2026-11-19 14:14 ` bugzilla-daemon
0 siblings, 2 replies; 3+ messages in thread
From: bugzilla-daemon @ 2026-11-19 13:33 UTC (permalink / raw)
To: linux-usb
https://bugzilla.kernel.org/show_bug.cgi?id=222296
Bug ID: 222296
Summary: HID sub-device (wheel rim) hot-swap on Ardor Le Mans
base does not re-probe the keyboard interface
Product: Drivers
Version: 2.5
Hardware: All
OS: Linux
Status: NEW
Severity: normal
Priority: P3
Component: USB
Assignee: drivers_usb@kernel-bugs.kernel.org
Reporter: daniel.matushkin@gmail.com
Regression: No
[1.] Summary:
The Ardor Le Mans racing wheel base exposes multiple HID interfaces (joystick
for FFB, keyboard for buttons). When the wheel rim is physically removed and
reconnected while the base remains plugged into the PC via USB, the buttons
stop working.
The USB connection of the base is NOT dropped during the rim hot-swap, and no
new events appear in dmesg. The kernel does not trigger a re-probe of the
keyboard interface (input1), leaving the input state stuck.
[2.] Steps to reproduce:
1. Connect the wheel rim to the Ardor Le Mans base.
2. Plug the base's USB cable into the PC.
3. Verify buttons work normally (input1 / keyboard interface).
4. Disconnect the rim from the base (dmesg shows nothing).
5. Reconnect the rim to the base (dmesg shows nothing).
6. Press any button on the wheel — no input is registered.
7. Re-plugging the base's USB cable from the PC temporarily fixes the issue.
[3.] Expected behavior:
The keyboard interface (input1) should be re-initialized or continue to receive
HID reports after the rim is hot-swapped.
[4.] Actual behavior:
The buttons stop responding in OS and games. dmesg produces no output during
the rim swap, indicating the parent USB device remains connected but the
sub-device state is lost.
[5.] Environment:
- Distribution: Linux Mint 22.2 Cinnamon
- Kernel: 7.0.0-43-generic
- Driver involved: hid-universal-pidff (version 0.22) + hid-generic
- Hardware: Ardor Le Mans base (USB ID: 11ff:dd12)
- Connection: Direct to PC USB port (xhci_hcd)
[6.] dmesg output (relevant lines):
> [Ср ноя 18 23:12:33 2026] usb 1-7.2: USB disconnect, device number 32
> [Ср ноя 18 23:12:45 2026] usb 1-7.1: new full-speed USB device number 34
> using xhci_hcd
> [Ср ноя 18 23:12:45 2026] usb 1-7.1: New USB device found, idVendor=11ff,
> idProduct=dd12, bcdDevice= 0.40
> [Ср ноя 18 23:12:45 2026] usb 1-7.1: New USB device strings: Mfr=1,
> Product=2, SerialNumber=3
> [Ср ноя 18 23:12:45 2026] usb 1-7.1: Product: ARDOR Le Mans
> [Ср ноя 18 23:12:45 2026] usb 1-7.1: Manufacturer: LitteStar
> [Ср ноя 18 23:12:45 2026] usb 1-7.1: SerialNumber: 76665B50C7D531DD
> [Ср ноя 18 23:12:45 2026] input: LitteStar ARDOR Le Mans as
> /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.0/0003:11FF:DD12.0023/input/input55
> [Ср ноя 18 23:12:45 2026] hid-universal-pidff 0003:11FF:DD12.0023:
> input,hidraw5: USB HID v1.11 Joystick [LitteStar ARDOR Le Mans] on
> usb-0000:00:14.0-7.1/input0
> [Ср ноя 18 23:12:45 2026] hid-universal-pidff 0003:11FF:DD12.0023: device has
> unknown autocenter control method
> [Ср ноя 18 23:12:45 2026] input input55: Force feedback for USB HID PID
> devices by Anssi Hannula
> [Ср ноя 18 23:12:45 2026] hid-universal-pidff 0003:11FF:DD12.0023: Universal
> pidff driver loaded successfully!
> [Ср ноя 18 23:12:45 2026] input: LitteStar ARDOR Le Mans as
> /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.1/0003:11FF:DD12.0024/input/input56
> [Ср ноя 18 23:12:45 2026] hid-universal-pidff 0003:11FF:DD12.0024:
> input,hidraw24: USB HID v1.10 Keyboard [LitteStar ARDOR Le Mans] on
> usb-0000:00:14.0-7.1/input1
> [Ср ноя 18 23:12:45 2026] hid-universal-pidff 0003:11FF:DD12.0025:
> hiddev11,hidraw25: USB HID v1.11 Device [LitteStar ARDOR Le Mans] on
> usb-0000:00:14.0-7.1/input2
Note: No dmesg output is generated when the rim is removed or reconnected.
[7.] Additional context:
The wheel requires a strict initialization sequence: the rim must be attached
BEFORE the base is plugged into the PC. If the base is already plugged in and
the rim is attached, the buttons do not work at all. The base does not expose a
USB hub; the rim connects via an internal protocol, and the base simply stops
sending correct HID reports for input1.
--
You are receiving this mail because:
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-11-19 14:14 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-19 13:33 [Bug 222296] New: HID sub-device (wheel rim) hot-swap on Ardor Le Mans base does not re-probe the keyboard interface bugzilla-daemon
2026-11-19 13:34 ` [Bug 222296] " bugzilla-daemon
2026-11-19 14:14 ` bugzilla-daemon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox