[PATCH v3 0/2] Add Telit Cinterion FE910C04 new compositions

Linux USB
 help / color / mirror / Atom feed

* [PATCH v3 0/2] Add Telit Cinterion FE910C04 new compositions
@ 2025-11-26 14:26 Fabio Porcedda
  2025-11-26 14:26 ` [PATCH v3 1/2] USB: serial: option: add " Fabio Porcedda
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Fabio Porcedda @ 2025-11-26 14:26 UTC (permalink / raw)
  To: Johan Hovold
  Cc: Greg Kroah-Hartman, linux-usb, Daniele Palmas, Fabio Porcedda

Add Telit Cinterion FE910C04 new compositions.
Also puts Telit Cinterion 0x10c7 composition in the correct order
inside the source file.

v3:
- Fix commit message of the first patch

v2:
- Fix author's email of the first patch


Fabio Porcedda (2):
  USB: serial: option: add Telit Cinterion FE910C04 new compositions
  USB: serial: option: move Telit 0x10c7 composition in the right place

 drivers/usb/serial/option.c | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

-- 
2.52.0


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v3 1/2] USB: serial: option: add Telit Cinterion FE910C04 new compositions
  2025-11-26 14:26 [PATCH v3 0/2] Add Telit Cinterion FE910C04 new compositions Fabio Porcedda
@ 2025-11-26 14:26 ` Fabio Porcedda
  2025-11-26 14:26 ` [PATCH v3 2/2] USB: serial: option: move Telit 0x10c7 composition in the right place Fabio Porcedda
  2025-11-26 16:14 ` [PATCH v3 0/2] Add Telit Cinterion FE910C04 new compositions Johan Hovold
  2 siblings, 0 replies; 4+ messages in thread
From: Fabio Porcedda @ 2025-11-26 14:26 UTC (permalink / raw)
  To: Johan Hovold
  Cc: Greg Kroah-Hartman, linux-usb, Daniele Palmas, Fabio Porcedda,
	stable

Add the following Telit Cinterion new compositions:

0x10c1: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c1 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c2: MBIM + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c2 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c3: ECM + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  9 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c3 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c5: RNDIS + tty (AT) + tty (AT) + tty (diag)
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c5 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c6: MBIM + tty (AT) + tty (AT) + tty (diag)
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c6 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10c9: MBIM + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c9 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10cb: RNDIS + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#=  9 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10cb Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
---
 drivers/usb/serial/option.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e9400727ad36..b9983e6f5eff 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1433,10 +1433,24 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x60) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c0, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c1, 0xff),	/* Telit FE910C04 (RNDIS) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c2, 0xff),	/* Telit FE910C04 (MBIM) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c3, 0xff),	/* Telit FE910C04 (ECM) */
+	  .driver_info = NCTRL(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c4, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c5, 0xff),	/* Telit FE910C04 (RNDIS) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c6, 0xff),	/* Telit FE910C04 (MBIM) */
+	  .driver_info = NCTRL(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c8, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c9, 0xff),	/* Telit FE910C04 (MBIM) */
+	  .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10cb, 0xff),	/* Telit FE910C04 (RNDIS) */
+	  .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x30),	/* Telit FN990B (rmnet) */
 	  .driver_info = NCTRL(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) },
-- 
2.52.0


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [PATCH v3 2/2] USB: serial: option: move Telit 0x10c7 composition in the right place
  2025-11-26 14:26 [PATCH v3 0/2] Add Telit Cinterion FE910C04 new compositions Fabio Porcedda
  2025-11-26 14:26 ` [PATCH v3 1/2] USB: serial: option: add " Fabio Porcedda
@ 2025-11-26 14:26 ` Fabio Porcedda
  2025-11-26 16:14 ` [PATCH v3 0/2] Add Telit Cinterion FE910C04 new compositions Johan Hovold
  2 siblings, 0 replies; 4+ messages in thread
From: Fabio Porcedda @ 2025-11-26 14:26 UTC (permalink / raw)
  To: Johan Hovold
  Cc: Greg Kroah-Hartman, linux-usb, Daniele Palmas, Fabio Porcedda

Move Telit 0x10c7 composition right after 0x10c6 composition and
before 0x10c8 composition.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
---
 drivers/usb/serial/option.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index b9983e6f5eff..2610bb860682 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1445,6 +1445,9 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c6, 0xff),	/* Telit FE910C04 (MBIM) */
 	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x30),	/* Telit FE910C04 (ECM) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c8, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c9, 0xff),	/* Telit FE910C04 (MBIM) */
@@ -1455,9 +1458,6 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x60) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x30),	/* Telit FE910C04 (ECM) */
-	  .driver_info = NCTRL(4) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x30),	/* Telit FN990B (MBIM) */
 	  .driver_info = NCTRL(6) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x40) },
-- 
2.52.0


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH v3 0/2] Add Telit Cinterion FE910C04 new compositions
  2025-11-26 14:26 [PATCH v3 0/2] Add Telit Cinterion FE910C04 new compositions Fabio Porcedda
  2025-11-26 14:26 ` [PATCH v3 1/2] USB: serial: option: add " Fabio Porcedda
  2025-11-26 14:26 ` [PATCH v3 2/2] USB: serial: option: move Telit 0x10c7 composition in the right place Fabio Porcedda
@ 2025-11-26 16:14 ` Johan Hovold
  2 siblings, 0 replies; 4+ messages in thread
From: Johan Hovold @ 2025-11-26 16:14 UTC (permalink / raw)
  To: Fabio Porcedda; +Cc: Greg Kroah-Hartman, linux-usb, Daniele Palmas

On Wed, Nov 26, 2025 at 03:26:38PM +0100, Fabio Porcedda wrote:
> Add Telit Cinterion FE910C04 new compositions.
> Also puts Telit Cinterion 0x10c7 composition in the correct order
> inside the source file.
> 
> v3:
> - Fix commit message of the first patch
> 
> v2:
> - Fix author's email of the first patch
> 
> 
> Fabio Porcedda (2):
>   USB: serial: option: add Telit Cinterion FE910C04 new compositions
>   USB: serial: option: move Telit 0x10c7 composition in the right place

Applied, thanks.

Johan

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2025-11-26 16:13 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-11-26 14:26 [PATCH v3 0/2] Add Telit Cinterion FE910C04 new compositions Fabio Porcedda
2025-11-26 14:26 ` [PATCH v3 1/2] USB: serial: option: add " Fabio Porcedda
2025-11-26 14:26 ` [PATCH v3 2/2] USB: serial: option: move Telit 0x10c7 composition in the right place Fabio Porcedda
2025-11-26 16:14 ` [PATCH v3 0/2] Add Telit Cinterion FE910C04 new compositions Johan Hovold

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox