From: Alban Browaeys <alban.browaeys@gmail.com>
To: Oliver Neukum <oneukum@suse.com>, linux-usb@vger.kernel.org
Subject: Re: add NO_REPORT_LUNS quirk for at least a few Seagate external drives to fix smartctl with uas
Date: Fri, 14 Jun 2024 02:18:19 +0200 [thread overview]
Message-ID: <db0adddf85d29d50c3930342bd4b09fc287091b8.camel@gmail.com> (raw)
In-Reply-To: <45b88a576be459f37ed8f329d53221640ce3617e.camel@gmail.com>
Le mercredi 12 juin 2024 à 17:13 +0200, Alban Browaeys a écrit :
> Le mercredi 12 juin 2024 à 03:39 +0200, Alban Browaeys a écrit :
> > Le mardi 11 juin 2024 à 10:21 +0200, Oliver Neukum a écrit :
> > >
> > >
> > > On 10.06.24 21:25, Alban Browaeys wrote:
> > > > I found that for "smartctl" to work on my two Seagate Expansion
> > > > external USB3 I had to add the "j" usb-storage quirks ie
> > > > "US_FL_NO_REPORT_LUNS".
> > > > (They are years apart).
> > >
> > > Hi,
> > >
> > > does the attached patch do the job?
> > >
> > > Regards
> > > Oliver
> >
> > No, it does not work.
> > smartctl is still broken with the US_FL_NO_REPORT_LUNS in
> > drivers/usb/storage/unusual_uas.h.
> >
> > But if I add back the "j" usb.quirks flag back with:
> > echo -n "0x0bc2:0x2037:j" | sudo tee
> > /sys/module/usb_storage/parameters/quirks
> > and then:
> > echo -n "2-2:1.0" | sudo tee /sys/bus/usb/drivers/uas/unbind
> > echo -n "2-2:1.0" | sudo tee /sys/bus/usb/drivers/uas/bind
> > then smartctl works.
> >
> > I tested on tw kernels with the two different seagate drives.
> >
> > sudo grep Seagate /sys/devices/ -r |& grep Seagate
> > /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/manufacturer:Seagate
> > /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-
> > 2:1.0/host8/target8:0:0/8:0:0:0/vendor:Seagate
> >
> > head /sys/devices/pci0000\:00/0000\:00\:14.0/usb2/2-2/quirks
> > 0x0
> >
> >
> >
> >
> > lrwxrwxrwx 1 root root 9 12 juin 03:14 usb-
> > Seagate_Expansion_HDD_00000000NACSHZWL-0:0 -> ../../sdc
> > lrwxrwxrwx 1 root root 10 12 juin 03:14 usb-
> > Seagate_Expansion_HDD_00000000NACSHZWL-0:0-part1 -> ../../sdc1
> >
> > sudo smartctl -i /dev/sdc
> > smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.10.0-rc3+] (local
> > build)
> > Copyright (C) 2002-23, Bruce Allen, Christian Franke,
> > www.smartmontools.org
> >
> > Read Device Identity failed: scsi error unsupported field in scsi
> > command
> >
> > If this is a USB connected device, look at the various --
> > device=TYPE
> > variants
> > A mandatory SMART command failed: exiting. To continue, add one or
> > more '-T permissive' options.
> >
> >
> > lsusb -t
> > /: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/12p,
> > 480M
> > |__ Port 001: Dev 002, If 0, Class=Vendor Specific Class,
> > Driver=[none], 12M
> > |__ Port 001: Dev 002, If 1, Class=Audio, Driver=[none], 12M
> > |__ Port 001: Dev 002, If 2, Class=Audio, Driver=[none], 12M
> > |__ Port 005: Dev 003, If 0, Class=Hub, Driver=hub/4p, 480M
> > |__ Port 002: Dev 005, If 0, Class=Vendor Specific Class,
> > Driver=cp210x, 12M
> > |__ Port 003: Dev 008, If 0, Class=Wireless, Driver=btusb,
> > 12M
> > |__ Port 003: Dev 008, If 1, Class=Wireless, Driver=btusb,
> > 12M
> > |__ Port 009: Dev 004, If 0, Class=Hub, Driver=hub/4p, 480M
> > |__ Port 003: Dev 009, If 0, Class=Human Interface Device,
> > Driver=usbhid, 1.5M
> > |__ Port 003: Dev 009, If 1, Class=Human Interface Device,
> > Driver=usbhid, 1.5M
> > |__ Port 004: Dev 010, If 0, Class=Human Interface Device,
> > Driver=usbhid, 1.5M
> > |__ Port 004: Dev 010, If 1, Class=Human Interface Device,
> > Driver=usbhid, 1.5M
> > /: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/6p,
> > 5000M
> > |__ Port 002: Dev 002, If 0, Class=Mass Storage, Driver=uas,
> > 5000M
> > |__ Port 003: Dev 003, If 0, Class=Mass Storage, Driver=usb-
> > storage, 5000M
> > |__ Port 005: Dev 004, If 0, Class=Hub, Driver=hub/4p, 5000M
> > |__ Port 006: Dev 005, If 0, Class=Mass Storage, Driver=usb-
> > storage, 5000M
> >
> > with the "j" usb.quirks flag:
> > sudo smartctl -i /dev/sdc
> > smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.10.0-rc3+] (local
> > build)
> > Copyright (C) 2002-23, Bruce Allen, Christian Franke,
> > www.smartmontools.org
> >
> > === START OF INFORMATION SECTION ===
> > Model Family: Seagate Barracuda 2.5 5400
> > Device Model: ST4000LM024-2AN17V
> > Serial Number: WCKAEWZZ
> > LU WWN Device Id: 5 000c50 0e732b6d8
> > Firmware Version: 0001
> > User Capacity: 4 000 787 030 016 bytes [4,00 TB]
> > Sector Sizes: 512 bytes logical, 4096 bytes physical
> > Rotation Rate: 5526 rpm
> > Form Factor: 2.5 inches
> > Device is: In smartctl database 7.3/5528
> > ATA Version is: ACS-3 T13/2161-D revision 5
> > SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
> > Local Time is: Wed Jun 12 03:30:47 2024 CEST
> > SMART support is: Available - device has SMART capability.
> > SMART support is: Enabled
> >
> >
>
>
>
> Your patch had:
> +UNUSUAL_DEV(0x0bc2, 0x2037, 0x0000, 0x9999,
> + "Seagate",
> + "RSS LLC Expansion HDD",
> + USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> + US_FL_NO_REPORT_LUNS),
> +
> +/* Reported-by: Alban Browaeys <alban.browaeys@gmail.com> */
> +UNUSUAL_DEV(0x0bc2, 0x231a, 0x0000, 0x9999,
> + "Seagate",
> + "RSS LLC Expansion Portable",
> + USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> + US_FL_NO_REPORT_LUNS),
> +
>
> but:
> head /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/manufacturer
> Seagate
>
> head /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/product
> Expansion HDD
>
> head /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/id*
> ==> /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/idProduct <==
> 2037
>
> ==> /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/idVendor <==
> 0bc2
> head /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/quirks
> 0x0
>
>
>
> and:
>
> head /sys/devices/platform/usb@fe900000/fe900000.usb/xhci-
> hcd.0.auto/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1.4/manufacturer
> Seagate
> head /sys/devices/platform/usb@fe900000/fe900000.usb/xhci-
> hcd.0.auto/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1.4/product
> Expansion
> head /sys/devices/platform/usb@fe900000/fe900000.usb/xhci-
> hcd.0.auto/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1.4/id*
> ==> /sys/devices/platform/usb@fe900000/fe900000.usb/xhci-
> hcd.0.auto/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1.4/idProduct <==
> 231a
>
> ==> /sys/devices/platform/usb@fe900000/fe900000.usb/xhci-
> hcd.0.auto/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1.4/idVendor <==
> 0bc2
>
>
> I replace the product name with the one from sysfs in your patch but
> the patch still does not work.
> +UNUSUAL_DEV(0x0bc2, 0x2037, 0x0000, 0x9999,
> + "Seagate",
> + "Expansion HDD",
> + USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> + US_FL_NO_REPORT_LUNS),
>
> +UNUSUAL_DEV(0x0bc2, 0x231a, 0x0000, 0x9999,
> + "Seagate",
> + "Expansion",
> + USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> + US_FL_NO_REPORT_LUNS),
>
>
>
> How could I see if the quirk is applied?
> Does sysfs:
> head /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/quirks
> 0x0
> tells it was not?
>
>
> On the 0x2037 box:
> lsusb -t
> /: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/12p,
> 480M
> |__ Port 001: Dev 002, If 0, Class=Vendor Specific Class,
> Driver=[none], 12M
> |__ Port 001: Dev 002, If 1, Class=Audio, Driver=[none], 12M
> |__ Port 001: Dev 002, If 2, Class=Audio, Driver=[none], 12M
> |__ Port 005: Dev 003, If 0, Class=Hub, Driver=hub/4p, 480M
> |__ Port 002: Dev 005, If 0, Class=Vendor Specific Class,
> Driver=cp210x, 12M
> |__ Port 003: Dev 008, If 0, Class=Wireless, Driver=btusb,
> 12M
> |__ Port 003: Dev 008, If 1, Class=Wireless, Driver=btusb,
> 12M
> |__ Port 009: Dev 004, If 0, Class=Hub, Driver=hub/4p, 480M
> |__ Port 003: Dev 009, If 0, Class=Human Interface Device,
> Driver=usbhid, 1.5M
> |__ Port 003: Dev 009, If 1, Class=Human Interface Device,
> Driver=usbhid, 1.5M
> |__ Port 004: Dev 010, If 0, Class=Human Interface Device,
> Driver=usbhid, 1.5M
> |__ Port 004: Dev 010, If 1, Class=Human Interface Device,
> Driver=usbhid, 1.5M
> /: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/6p,
> 5000M
> |__ Port 002: Dev 002, If 0, Class=Mass Storage, Driver=uas,
> 5000M
> |__ Port 003: Dev 003, If 0, Class=Mass Storage, Driver=usb-
> storage, 5000M
> |__ Port 005: Dev 004, If 0, Class=Hub, Driver=hub/4p, 5000M
> |__ Port 006: Dev 005, If 0, Class=Mass Storage, Driver=usb-
> storage, 5000M
>
>
> lsusb
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 002: ID 046d:08ae Logitech, Inc. QuickCam for
> Notebooks
> Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. Hub
> Bus 001 Device 004: ID 05e3:0610 Genesys Logic, Inc. Hub
> Bus 001 Device 005: ID 10c4:ea60 Silicon Labs CP210x UART Bridge
> Bus 001 Device 008: ID 0a12:0001 Cambridge Silicon Radio, Ltd
> Bluetooth Dongle (HCI mode)
> Bus 001 Device 009: ID 17ef:608c Lenovo Lenovo Calliope USB Keyboard
> Bus 001 Device 010: ID 046d:c517 Logitech, Inc. LX710 Cordless
> Desktop Laser
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 002 Device 002: ID 0bc2:2037 Seagate RSS LLC Expansion HDD
> Bus 002 Device 003: ID 1058:1078 Western Digital Technologies, Inc.
> Elements Portable (WDBUZG)
> Bus 002 Device 004: ID 05e3:0626 Genesys Logic, Inc. Hub
> Bus 002 Device 005: ID 08e4:017a Pioneer Corp. BD-XD07 BD/DVD/CD
> Writer
>
>
>
> Mind I have not test the 0x231a device on 6.9 branch yet as the
> kernel
> build with the patch change is till building. I only tested the
> 0x2037
> one on 6.10.0-rc3.
>
>
>
> Regards,
> Alban
>
Note: Should I add Hans de Goede to the recipients, or only when the
patch is ready?
I read the code but I cannot find where the flags are applied in the
uas driver (drivers/usb/storage/uas.c).
In usb-storage the flow is:
storage_probe drivers/usb/storage/usb.c
> uas_use_uas_driver if true exit
> usb_stor_probe1
> get_device_info
> usb_stor_adjust_quirks
> usb-storage.quirks applied
but for my uas diver when usb-storage driver probe it exits in
storage_probe before usb_stor_probe1 because uas_use_uas is true.
When uas probe:
uas_init drivers/usb/storage/uas.c
> usb_register
> usb_device_match+0x43/0xa0
> usb_match_id+0x70/0xb0
> usb_match_device+0x13a/0x210
usb_match_device: SUCCESS id_table idVendor 0xbc2 idProduct 0x2037 driver_info 0x10000000 devive id vendor 0xbc2 device id product 0x2037
but then I see no code to apply the flag US_FL_NO_REPORT_LUNS.
Could you help me find it?
I don't understand how the usb-storage.quirks "j" flag could help if
the uas has no code to apply the flag.
I alos see in the code that I was supposed to add more info:
for 0x0bc2 0x2037:
- /sys/kernel/debug/usb/devices
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=0bc2 ProdID=2037 Rev=19.01
S: Manufacturer=Seagate
S: Product=Expansion HDD
S: SerialNumber=00000000NACSHZWL
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=896mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=uas
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 0 Alt= 1 #EPs= 4 Cls=08(stor.) Sub=06 Prot=62 Driver=uas
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
- lsusb -v
Bus 002 Device 002: ID 0bc2:2037 Seagate RSS LLC Expansion HDD
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0 [unknown]
bDeviceSubClass 0 [unknown]
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x0bc2 Seagate RSS LLC
idProduct 0x2037 Expansion HDD
bcdDevice 19.01
iManufacturer 1 Seagate
iProduct 2 Expansion HDD
iSerial 3 00000000NACSHZWL
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0079
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 896mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Command pipe (0x01)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
MaxStreams 32
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 7
MaxStreams 32
Data-out pipe (0x04)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x0016
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000f0e
BESL Link Power Management (LPM) Supported
BESL value 3840 us
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 32 micro seconds
Device Status: 0x000c
(Bus Powered)
U1 Enabled
U2 Enabled
for 0x0bc2 0x231a
- /sys/kernel/debug/usb/devices
T: Bus=02 Lev=04 Prnt=05 Port=03 Cnt=02 Dev#= 8 Spd=5000 MxCh= 0
D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=0bc2 ProdID=231a Rev= 7.10
S: Manufacturer=Seagate
S: Product=Expansion
S: SerialNumber=NAADEE3G
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=896mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=uas
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 0 Alt= 1 #EPs= 4 Cls=08(stor.) Sub=06 Prot=62 Driver=uas
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
- lsusb -v
Bus 002 Device 008: ID 0bc2:231a Seagate RSS LLC Expansion Portable
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x0bc2 Seagate RSS LLC
idProduct 0x231a Expansion Portable
bcdDevice 7.10
iManufacturer 1 Seagate
iProduct 2 Expansion
iSerial 3 NAADEE3G
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0079
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 896mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Command pipe (0x01)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
MaxStreams 32
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 7
MaxStreams 32
Data-out pipe (0x04)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x0016
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000f0e
BESL Link Power Management (LPM) Supported
BESL value 3840 us
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 32 micro seconds
Device Status: 0x0000
(Bus Powered)
Cheers,
Alban
next prev parent reply other threads:[~2024-06-14 0:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-10 19:25 add NO_REPORT_LUNS quirk for at least a few Seagate external drives to fix smartctl with uas Alban Browaeys
2024-06-11 6:08 ` Greg KH
2024-06-11 8:21 ` Oliver Neukum
2024-06-12 1:39 ` Alban Browaeys
2024-06-12 15:13 ` Alban Browaeys
2024-06-14 0:18 ` Alban Browaeys [this message]
2024-06-14 1:20 ` Remove NO_ATA_1X quirk for at least a few Seagate external drives to fix smartctl with uas ? Alban Browaeys
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=db0adddf85d29d50c3930342bd4b09fc287091b8.camel@gmail.com \
--to=alban.browaeys@gmail.com \
--cc=linux-usb@vger.kernel.org \
--cc=oneukum@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox