* [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
@ 2026-09-19 12:39 Freeman Z
2026-09-21 5:04 ` Mika Westerberg
0 siblings, 1 reply; 40+ messages in thread
From: Freeman Z @ 2026-09-19 12:39 UTC (permalink / raw)
To: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org
Cc: bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org
Hello,
I am seeing a reproducible USB4/PCIe runtime-PM problem on an ASUS ROG
Flow X13 GV302XV (Ryzen 9 7940HS / Phoenix) with a Kensington SD5000T5
EQ Thunderbolt 5 dock connected to the laptop's USB4 host port.
The failure is reproducible with the official Arch Linux Live ISO using
Arch's stock `linux` kernel:
7.2.2-arch1-1
I have not yet tested a self-built kernel.org mainline/vanilla kernel.
I can test patches, or collect additional traces if requested.
Summary
=======
The AMD Family 19h USB4/Thunderbolt PCIe tunnel at 0000:00:04.1
(1022:14ef) runtime-suspends while the Thunderbolt dock is connected.
In the failure state:
/sys/bus/pci/devices/0000:00:04.1/power/control
auto
/sys/bus/pci/devices/0000:00:04.1/power/runtime_status
suspended
/sys/bus/pci/devices/0000:09:00.0
does not exist
The Thunderbolt subsystem does detect the dock itself, but the
downstream Intel JHL9480/Barlow Ridge PCIe hierarchy is absent.
Without running lspci, I execute only:
echo on > /sys/bus/pci/devices/0000:00:04.1/power/control
Immediately afterwards:
/sys/bus/pci/devices/0000:00:04.1/power/runtime_status
active
/sys/bus/pci/devices/0000:09:00.0
exists
and the downstream JHL9480 hierarchy, USB peripherals, and Ethernet
adapter behind the dock become available.
Reading PCI configuration space with:
lspci >/dev/null
also wakes the topology, which is how I first noticed the issue.
Hardware
========
Laptop:
ASUS ROG Flow X13 GV302XV
AMD Ryzen 9 7940HS (Phoenix)
AMD Radeon 780M iGPU
NVIDIA GeForce RTX 4060 Laptop GPU
Dock:
Kensington SD5000T5 EQ Thunderbolt 5 dock
Connected through the laptop's AMD Phoenix USB4 host port
Recovered PCI topology identifies:
00:04.1 PCI bridge [0604]:
Advanced Micro Devices, Inc. [AMD]
Family 19h USB4/Thunderbolt PCIe tunnel [1022:14ef]
09:00.0 PCI bridge [0604]:
Intel Corporation JHL9480 Thunderbolt 5 80/120G Bridge
[Barlow Ridge Hub 80G 2023] [8086:5786] (rev 84)
0a:00.0 / 0a:01.0 / 0a:02.0 / 0a:03.0 / 0a:04.0:
Intel JHL9480 Thunderbolt 5 bridges [8086:5786]
0c:00.0 USB controller [0c03]:
Intel Corporation JHL9480 Thunderbolt 5 80/120G USB Controller
[8086:5787]
The working PCI tree is:
0000:00:04.1
-> 0000:09:00.0
-> 0000:0a:01.0
-> 0000:0c:00.0
-> downstream USB buses/devices
Arch Linux reproduction
=======================
I booted the official Arch Linux Live ISO with the dock attached.
Before running lspci or any hardware inventory tool, I observed:
# cat /sys/bus/pci/devices/0000:00:04.1/power/control
auto
# cat /sys/bus/pci/devices/0000:00:04.1/power/runtime_status
suspended
# test -e /sys/bus/pci/devices/0000:09:00.0 &&
echo present || echo missing
missing
I captured journalctl -k -b and dmesg at this point.
The failure-state boot log contains:
pci 0000:00:04.1: [1022:14ef] type 01 class 0x060400 PCIe Root Port
pci 0000:00:04.1: PCI bridge to [bus 09-68]
and the Thunderbolt subsystem detects the dock:
thunderbolt 0-2: new device found, vendor=0x1b device=0x11
thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
However, the failure-state log contains no 0000:09:00.0 PCI device.
The ACPI/USB4 log also says:
ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
I then ran only:
echo on > /sys/bus/pci/devices/0000:00:04.1/power/control
After a few seconds:
# cat /sys/bus/pci/devices/0000:00:04.1/power/runtime_status
active
# test -e /sys/bus/pci/devices/0000:09:00.0 &&
echo present || echo missing
present
The dock USB devices and Ethernet adapter recovered at the same time.
Only after this recovery did I run lspci, which showed the JHL9480
devices listed above.
Other kernels / environments
============================
The same enumeration problem has also been observed with:
linux-cachyos 7.2.3
linux-cachyos 7.2.4
linux-cachyos 7.2.6
linux-cachyos-lts 6.18.x
CachyOS Live USB environment
Because it also reproduces on 6.18.x and I do not have a known
last-good kernel, I am not marking this as a regression and I do not
currently have a first-bad commit.
Workarounds and negative tests
==============================
A local udev rule that forces only 0000:00:04.1 active reliably avoids
the enumeration failure:
ACTION=="add", SUBSYSTEM=="pci", KERNEL=="0000:00:04.1", \
TEST=="power/control", ATTR{power/control}="on"
The global kernel option:
pcie_port_pm=off
also prevents the enumeration failure, but is undesirable as a
permanent workaround because it disables PCIe port PM globally.
Forcing already-enumerated xHCI controllers to power/control=on did
not fix the issue.
An ASUS EC/hard reset did not fix the issue.
Additional shutdown/display observation
=======================================
This is not the primary subject of the report, but the same setup also
has intermittent display and late shutdown/reboot problems.
On Arch stock 7.2.2-arch1-1 I reproduced a late reboot hang after
systemd had already reached System Reboot. The console eventually
showed:
INFO: task shutdown:1 blocked for more than 122 seconds.
Not tainted 7.2.2-arch1-1 #1
Immediately before that there were repeated USB U1 transition failures
for a downstream USB device. Powering off the dock after the shutdown
was already stuck did not make the reboot continue.
The Arch boot log also contains:
thunderbolt 0000:6b:00.6: 0: failed to allocate DP resource for port 7
I mention this only as potentially related context; I don't think
that the shutdown/display symptoms and the deterministic PCIe
enumeration failure have the same root cause.
I have full failure-state dmesg and journalctl logs from the Arch Live
test, captured before waking 0000:00:04.1, and can provide them on
request.
CachyOS tracking issue: https://github.com/CachyOS/linux-cachyos/issues/1057
Thanks.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-19 12:39 [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration Freeman Z
@ 2026-09-21 5:04 ` Mika Westerberg
2026-09-21 15:24 ` Mario Limonciello
0 siblings, 1 reply; 40+ messages in thread
From: Mika Westerberg @ 2026-09-21 5:04 UTC (permalink / raw)
To: Freeman Z
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, Sanath S, Basavaraj Natikar,
Mario Limonciello
Hi,
Adding AMD folks in case this is known issue.
On Sat, Sep 19, 2026 at 12:39:37PM +0000, Freeman Z wrote:
> Hello,
>
> I am seeing a reproducible USB4/PCIe runtime-PM problem on an ASUS ROG
> Flow X13 GV302XV (Ryzen 9 7940HS / Phoenix) with a Kensington SD5000T5
> EQ Thunderbolt 5 dock connected to the laptop's USB4 host port.
>
> The failure is reproducible with the official Arch Linux Live ISO using
> Arch's stock `linux` kernel:
>
> 7.2.2-arch1-1
>
> I have not yet tested a self-built kernel.org mainline/vanilla kernel.
> I can test patches, or collect additional traces if requested.
Can you provide full dmesg with "thunderbolt.dyndbg=+p" in the kernel
command line?
With the below steps (following your description):
0. Drop all non-standard command line options except the above.
1. Boot the system up, nothing connected.
2. Once up let the TB and the related PCIe root ports enter D3cold (don't
run lspci it will wake them up but you can look at the runtime status that
they are all suspended).
3. Plug in the dock.
We should see in the dmesg the PME if it works as expected. If not then it
may be that there is something wrong with the wakeup path.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-21 5:04 ` Mika Westerberg
@ 2026-09-21 15:24 ` Mario Limonciello
2026-09-22 16:40 ` Freeman Z
0 siblings, 1 reply; 40+ messages in thread
From: Mario Limonciello @ 2026-09-21 15:24 UTC (permalink / raw)
To: Mika Westerberg, Freeman Z
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, Sanath S, Basavaraj Natikar,
Kovacs, Alexander
+Alex K
On 9/21/26 00:04, Mika Westerberg wrote:
> Hi,
>
> Adding AMD folks in case this is known issue.
>
> On Sat, Sep 19, 2026 at 12:39:37PM +0000, Freeman Z wrote:
>> Hello,
>>
>> I am seeing a reproducible USB4/PCIe runtime-PM problem on an ASUS ROG
>> Flow X13 GV302XV (Ryzen 9 7940HS / Phoenix) with a Kensington SD5000T5
>> EQ Thunderbolt 5 dock connected to the laptop's USB4 host port.
>>
>> The failure is reproducible with the official Arch Linux Live ISO using
>> Arch's stock `linux` kernel:
>>
>> 7.2.2-arch1-1
>>
>> I have not yet tested a self-built kernel.org mainline/vanilla kernel.
>> I can test patches, or collect additional traces if requested.
>
> Can you provide full dmesg with "thunderbolt.dyndbg=+p" in the kernel
> command line?
>
> With the below steps (following your description):
>
> 0. Drop all non-standard command line options except the above.
> 1. Boot the system up, nothing connected.
> 2. Once up let the TB and the related PCIe root ports enter D3cold (don't
> run lspci it will wake them up but you can look at the runtime status that
> they are all suspended).
> 3. Plug in the dock.
>
> We should see in the dmesg the PME if it works as expected. If not then it
> may be that there is something wrong with the wakeup path.
There was something like this that was reported in the past, but it was
a race condition of some sort. It ended up being fixed by a non-obvious
optimization (I forget the specific commit).
But it was definitely older than 7.2, so it sounds like it might have
regressed again.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-21 15:24 ` Mario Limonciello
@ 2026-09-22 16:40 ` Freeman Z
2026-09-22 17:02 ` Kovacs, Alexander
2026-09-22 19:54 ` Kovacs, Alexander
0 siblings, 2 replies; 40+ messages in thread
From: Freeman Z @ 2026-09-22 16:40 UTC (permalink / raw)
To: Mario Limonciello, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, Sanath S, Basavaraj Natikar,
Kovacs, Alexander
[-- Attachment #1: Type: text/plain, Size: 4865 bytes --]
Hi Mika, Mario,
I reproduced the failure following the requested sequence on my installed
CachyOS system with kernel 7.2.6-1-cachyos and
thunderbolt.dyndbg=+p.
For this trace the dock was physically disconnected at boot. I did not run
lspci before or during the reproduction.
Before plugging the dock:
0000:00:04.1
power/control = auto
power/runtime_status = suspended
power_state = D3cold
0000:6b:00.6
power/control = auto
power/runtime_status = suspended
power_state = D3cold
After plugging the Kensington SD5000T5 and waiting about 15 seconds:
0000:00:04.1
power/control = auto
power/runtime_status = suspended
power_state = D3cold
0000:09:00.0
missing
0000:6b:00.6
power/control = auto
power/runtime_status = active
power_state = D0
The Thunderbolt dynamic debug log shows the NHI/control channel waking and
the USB4 fabric being configured. In particular:
thunderbolt 0000:6b:00.6: control channel starting...
thunderbolt 0000:6b:00.6: 0: resuming switch
thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state: 2)
thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
thunderbolt 0000:6b:00.6: PCIe Down path activation complete
thunderbolt 0000:6b:00.6: PCIe Up path activation complete
However, I do not see a PME message corresponding to the dock insertion.
The PME messages in the full dmesg are the early-boot
"PME: Signaling with IRQ ..." initialization messages.
So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold to D0
and the Thunderbolt driver successfully programs the PCIe tunnel in the
USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1
remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
I attached the full dmesg captured after the dock plug, plus the small
before/after state files. I redacted only unrelated local network identifiers,
the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device
UIDs are otherwise unchanged.
This particular dynamic-debug trace was collected on CachyOS rather than the
Arch stock kernel used for my earlier reproduction.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Monday, September 21, 2026 23:24
To: Mika Westerberg <mika.westerberg@linux.intel.com>; Freeman Z <SHD-ISAC@outlook.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; Sanath S <Sanath.S@amd.com>; Basavaraj Natikar <Basavaraj.Natikar@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
+Alex K
On 9/21/26 00:04, Mika Westerberg wrote:
> Hi,
>
> Adding AMD folks in case this is known issue.
>
> On Sat, Sep 19, 2026 at 12:39:37PM +0000, Freeman Z wrote:
>> Hello,
>>
>> I am seeing a reproducible USB4/PCIe runtime-PM problem on an ASUS ROG
>> Flow X13 GV302XV (Ryzen 9 7940HS / Phoenix) with a Kensington SD5000T5
>> EQ Thunderbolt 5 dock connected to the laptop's USB4 host port.
>>
>> The failure is reproducible with the official Arch Linux Live ISO using
>> Arch's stock `linux` kernel:
>>
>> 7.2.2-arch1-1
>>
>> I have not yet tested a self-built kernel.org mainline/vanilla kernel.
>> I can test patches, or collect additional traces if requested.
>
> Can you provide full dmesg with "thunderbolt.dyndbg=+p" in the kernel
> command line?
>
> With the below steps (following your description):
>
> 0. Drop all non-standard command line options except the above.
> 1. Boot the system up, nothing connected.
> 2. Once up let the TB and the related PCIe root ports enter D3cold (don't
> run lspci it will wake them up but you can look at the runtime status that
> they are all suspended).
> 3. Plug in the dock.
>
> We should see in the dmesg the PME if it works as expected. If not then it
> may be that there is something wrong with the wakeup path.
There was something like this that was reported in the past, but it was
a race condition of some sort. It ended up being fixed by a non-obvious
optimization (I forget the specific commit).
But it was definitely older than 7.2, so it sounds like it might have
regressed again.
[-- Attachment #2: dmesg-after-dock-sanitized.txt --]
[-- Type: text/plain, Size: 134363 bytes --]
[ 0.018186] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.018293] software IO TLB: area num 16.
[ 0.023353] Fallback order for Node 0: 0
[ 0.023360] Built 1 zonelists, mobility grouping on. Total pages: 3985885
[ 0.023361] Policy zone: Normal
[ 0.023469] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.037147] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.037319] ftrace: allocating 57845 entries in 226 pages
[ 0.037320] ftrace: allocated 226 pages with 4 groups
[ 0.037383] Dynamic Preempt: full
[ 0.037428] rcu: Preemptible hierarchical RCU implementation.
[ 0.037429] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[ 0.037429] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.037430] Trampoline variant of Tasks RCU enabled.
[ 0.037430] Rude variant of Tasks RCU enabled.
[ 0.037430] Tracing variant of Tasks RCU enabled.
[ 0.037431] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.037432] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.037440] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[ 0.037442] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[ 0.039308] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
[ 0.039516] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.039565] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.039715] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.039747] Console: colour dummy device 80x25
[ 0.039750] printk: legacy console [tty0] enabled
[ 0.039784] ACPI: Core revision 20260408
[ 0.039968] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.039988] APIC: Switch to symmetric I/O mode setup
[ 0.040230] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:0xa0
[ 0.040232] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:0xa0
[ 0.040232] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:0xa0
[ 0.040233] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:0xa0
[ 0.040233] AMD-Vi: Using global IVHD EFR:0x246577efa2254afa, EFR2:0x0
[ 0.040945] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.041979] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x731a599ade0, max_idle_ns: 881590761034 ns
[ 0.047006] Calibrating delay loop (skipped), value calculated using timer frequency.. 7985.26 BogoMIPS (lpj=3992633)
[ 0.047032] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.047070] LVT offset 1 assigned for vector 0xf9
[ 0.047071] LVT offset 2 assigned for vector 0xf4
[ 0.047279] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[ 0.047280] Last level dTLB entries: 4KB 3072, 2MB 3072, 4MB 1536, 1GB 0
[ 0.047289] process: using mwait in idle threads
[ 0.047291] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.047295] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.047297] Transient Scheduler Attacks: Mitigation: Clear CPU buffers
[ 0.047298] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[ 0.047299] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.047300] Speculative Return Stack Overflow: Mitigation: Safe RET
[ 0.047301] VMSCAPE: Mitigation: IBPB before exit to userspace
[ 0.047302] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.047308] Spectre V2 : Enabling IBPB for BPF
[ 0.047310] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.047311] active return thunk: srso_alias_return_thunk
[ 0.047323] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.047324] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.047324] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.047325] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.047325] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.047326] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.047326] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.047327] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[ 0.047327] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
[ 0.047328] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.047329] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64
[ 0.047330] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512
[ 0.047330] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[ 0.047331] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8
[ 0.047331] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16
[ 0.047332] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24
[ 0.047333] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
[ 0.072182] pid_max: default: 32768 minimum: 301
[ 0.072302] landlock: Up and running.
[ 0.072305] Yama: becoming mindful.
[ 0.072497] LSM support for eBPF active
[ 0.072535] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.072547] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.072608] VFS: Finished mounting rootfs on nullfs
[ 0.175368] smpboot: CPU0: AMD Ryzen 9 7940HS w/ Radeon 780M Graphics (family: 0x19, model: 0x74, stepping: 0x1)
[ 0.175549] Performance Events: Fam17h+ 16-deep LBR, core perfctr, AMD PMU driver.
[ 0.175579] ... version: 2
[ 0.175580] ... bit width: 48
[ 0.175581] ... generic counters: 6
[ 0.175582] ... generic bitmap: 000000000000003f
[ 0.175583] ... fixed-purpose counters: 0
[ 0.175584] ... fixed-purpose bitmap: 0000000000000000
[ 0.175585] ... value mask: 0000ffffffffffff
[ 0.175586] ... max period: 00007fffffffffff
[ 0.175587] ... global_ctrl mask: 000000000000003f
[ 0.175693] signal: max sigframe size: 3376
[ 0.175754] rcu: Hierarchical SRCU implementation.
[ 0.175755] rcu: Max phase no-delay instances is 400.
[ 0.175809] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[ 0.180701] MCE: In-kernel MCE decoding enabled.
[ 0.180871] smp: Bringing up secondary CPUs ...
[ 0.180944] smpboot: x86: Booting SMP configuration:
[ 0.180945] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.192122] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.199027] smp: Brought up 1 node, 16 CPUs
[ 0.199027] smpboot: Total of 16 processors activated (127764.25 BogoMIPS)
[ 0.200220] Memory: 15361164K/15943540K available (22734K kernel code, 2967K rwdata, 17168K rodata, 4828K init, 4180K bss, 565228K reserved, 0K cma-reserved)
[ 0.200407] devtmpfs: initialized
[ 0.200407] x86/mm: Memory block size: 128MB
[ 0.202448] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a23bfff] (245760 bytes)
[ 0.202448] ACPI: PM: Registering ACPI NVS region [mem 0xb11ff000-0xb66fefff] (89128960 bytes)
[ 0.203083] posixtimers hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.203083] futex hash table entries: 4096 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear).
[ 0.203107] xor: automatically using best checksumming function avx
[ 0.203251] PM: RTC time: 16:05:19, date: 2026-09-22
[ 0.203516] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.203673] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.203732] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.203787] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.203793] audit: initializing netlink subsys (disabled)
[ 0.203798] audit: type=2000 audit(1790093119.161:1): state=initialized audit_enabled=0 res=1
[ 0.212200] thermal_sys: Registered thermal governor 'fair_share'
[ 0.212202] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.212203] thermal_sys: Registered thermal governor 'step_wise'
[ 0.212204] thermal_sys: Registered thermal governor 'user_space'
[ 0.212205] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.212214] cpuidle: using governor ladder
[ 0.212214] cpuidle: using governor menu
[ 0.212214] Freeing SMP alternatives memory: 68K
[ 0.213407] efi: Freeing EFI boot services memory: 37352K
[ 0.213410] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.213412] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.213510] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.213524] PCI: Using configuration type 1 for base access
[ 0.213549] virt/tdx: TDX not supported by the host platform
[ 0.213565] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.213565] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.213565] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.213565] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.213565] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.215040] raid6: using avx512x2 recovery algorithm
[ 0.215042] raid6: skipped pq benchmark and selected avx512x4
[ 0.215170] ACPI: Added _OSI(Module Device)
[ 0.215171] ACPI: Added _OSI(Processor Device)
[ 0.215172] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.236677] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP2.WWAN], AE_NOT_FOUND (20260408/dswload2-163)
[ 0.236683] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20260408/psobject-220)
[ 0.236685] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.237206] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP2.WWAN], AE_NOT_FOUND (20260408/dswload2-163)
[ 0.237209] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20260408/psobject-220)
[ 0.237211] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.237242] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP7.DEV0], AE_NOT_FOUND (20260408/dswload2-163)
[ 0.237245] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20260408/psobject-220)
[ 0.237247] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.237706] ACPI: 27 ACPI AML tables successfully acquired and loaded
[ 0.239317] ACPI: EC: EC started
[ 0.239318] ACPI: EC: interrupt blocked
[ 0.239957] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.239959] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.240884] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.257394] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff]
[ 0.257830] ACPI: \_SB_: platform _OSC: OS control mask [006e7e7f]
[ 0.258241] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.258242] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.259059] ACPI: Interpreter enabled
[ 0.259073] ACPI: PM: (supports S0 S4 S5)
[ 0.259075] ACPI: Using IOAPIC for interrupt routing
[ 0.260680] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.260682] PCI: Ignoring E820 reservations for host bridge windows
[ 0.261144] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.262472] ACPI: \_SB_.PCI0.GPP2.P0WW: New power resource
[ 0.262946] ACPI: \_SB_.PCI0.GPP0.M237: New power resource
[ 0.270299] ACPI: \_SB_.PCI0.GPP0.SWUS.M237: New power resource
[ 0.270381] ACPI: \_SB_.PCI0.GPP0.SWUS.SWDS.M237: New power resource
[ 0.271475] ACPI: \_SB_.PCI0.GPP7.RPR2: New power resource
[ 0.271860] ACPI: \_SB_.PCI0.GPP8.P0NV: New power resource
[ 0.273117] ACPI: \_SB_.PCI0.GP11.PWRS: New power resource
[ 0.273791] ACPI: \_SB_.PCI0.GP11.SWUS.PWRS: New power resource
[ 0.275270] ACPI: \_SB_.PCI0.GP12.PWRS: New power resource
[ 0.276651] ACPI: \_SB_.PCI0.GP12.SWUS.PWRS: New power resource
[ 0.276894] ACPI: \_SB_.PCI0.GP17.PWRS: New power resource
[ 0.277154] ACPI: \_SB_.PCI0.GP17.VGA_.PWRS: New power resource
[ 0.277463] ACPI: \_SB_.PCI0.GP17.HDAU.PWRS: New power resource
[ 0.277722] ACPI: \_SB_.PCI0.GP17.ACP_.PWRS: New power resource
[ 0.278318] ACPI: \_SB_.PCI0.GP17.AZAL.PWRS: New power resource
[ 0.278943] ACPI: \_SB_.PCI0.GP17.XHC0.PWRS: New power resource
[ 0.279519] ACPI: \_SB_.PCI0.GP17.XHC0.RHUB.PRT4.BTPR: New power resource
[ 0.280035] ACPI: \_SB_.PCI0.GP17.XHC1.PWRS: New power resource
[ 0.281096] ACPI: \_SB_.PCI0.GP19.XHC2.PWRS: New power resource
[ 0.281954] ACPI: \_SB_.PCI0.GP19.XHC3.PWRS: New power resource
[ 0.282934] ACPI: \_SB_.PCI0.GP19.XHC4.PWRS: New power resource
[ 0.283921] ACPI: \_SB_.PCI0.GP19.NHI0.PWRS: New power resource
[ 0.284551] ACPI: \_SB_.PCI0.GP19.NHI1.PWRS: New power resource
[ 0.292426] ACPI: \_SB_.PRWL: New power resource
[ 0.293783] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.293788] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.293951] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.293953] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.294599] PCI host bridge to bus 0000:00
[ 0.294602] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.294604] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.294605] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.294606] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.294608] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfcffffff window]
[ 0.294609] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xf9ffffff window]
[ 0.294610] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.294611] pci_bus 0000:00: root bus resource [mem 0x440000000-0x7fffffffff window]
[ 0.294612] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.294635] pci 0000:00:00.0: [1022:14e8] type 00 class 0x060000 conventional PCI endpoint
[ 0.294846] pci 0000:00:00.2: [1022:14e9] type 00 class 0x080600 conventional PCI endpoint
[ 0.295017] pci 0000:00:01.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.295163] pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port
[ 0.295196] pci 0000:00:01.1: PCI bridge to [bus 01-05]
[ 0.295204] pci 0000:00:01.1: bridge window [io 0xf000-0xffff]
[ 0.295210] pci 0000:00:01.1: bridge window [mem 0xdc000000-0xdd0fffff]
[ 0.295224] pci 0000:00:01.1: bridge window [mem 0x6000000000-0x6801ffffff 64bit pref]
[ 0.295347] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.295979] pci 0000:00:02.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.296130] pci 0000:00:02.2: [1022:14ee] type 01 class 0x060400 PCIe Root Port
[ 0.296169] pci 0000:00:02.2: PCI bridge to [bus 06]
[ 0.296181] pci 0000:00:02.2: bridge window [mem 0xdda00000-0xddbfffff]
[ 0.296214] pci 0000:00:02.2: enabling Extended Tags
[ 0.296343] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.296625] pci 0000:00:02.3: [1022:14ee] type 01 class 0x060400 PCIe Root Port
[ 0.296661] pci 0000:00:02.3: PCI bridge to [bus 07]
[ 0.296673] pci 0000:00:02.3: bridge window [mem 0xde100000-0xde1fffff]
[ 0.296821] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.297096] pci 0000:00:02.4: [1022:14ee] type 01 class 0x060400 PCIe Root Port
[ 0.297132] pci 0000:00:02.4: PCI bridge to [bus 08]
[ 0.297145] pci 0000:00:02.4: bridge window [mem 0xde000000-0xde0fffff]
[ 0.297175] pci 0000:00:02.4: enabling Extended Tags
[ 0.297287] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.297526] pci 0000:00:03.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.297649] pci 0000:00:04.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.297804] pci 0000:00:04.1: [1022:14ef] type 01 class 0x060400 PCIe Root Port
[ 0.297852] pci 0000:00:04.1: PCI bridge to [bus 09-68]
[ 0.297863] pci 0000:00:04.1: bridge window [io 0xa000-0xdfff]
[ 0.297867] pci 0000:00:04.1: bridge window [mem 0xc4000000-0xdbffffff]
[ 0.297884] pci 0000:00:04.1: bridge window [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.297907] pci 0000:00:04.1: enabling Extended Tags
[ 0.298236] pci 0000:00:04.1: PME# supported from D0 D3hot D3cold
[ 0.299739] pci 0000:00:08.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.299855] pci 0000:00:08.1: [1022:14eb] type 01 class 0x060400 PCIe Root Port
[ 0.299870] pci 0000:00:08.1: PCI bridge to [bus 69]
[ 0.299875] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.299878] pci 0000:00:08.1: bridge window [mem 0xdd200000-0xdd8fffff]
[ 0.299885] pci 0000:00:08.1: bridge window [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.299891] pci 0000:00:08.1: enabling Extended Tags
[ 0.299932] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.300223] pci 0000:00:08.2: [1022:14eb] type 01 class 0x060400 PCIe Root Port
[ 0.300260] pci 0000:00:08.2: PCI bridge to [bus 6a]
[ 0.300266] pci 0000:00:08.2: bridge window [mem 0xddf00000-0xddffffff]
[ 0.300273] pci 0000:00:08.2: bridge window [mem 0x7c10900000-0x7c109fffff 64bit pref]
[ 0.300279] pci 0000:00:08.2: enabling Extended Tags
[ 0.300321] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[ 0.300450] pci 0000:00:08.3: [1022:14eb] type 01 class 0x060400 PCIe Root Port
[ 0.300465] pci 0000:00:08.3: PCI bridge to [bus 6b]
[ 0.300470] pci 0000:00:08.3: bridge window [mem 0xddc00000-0xddefffff]
[ 0.300481] pci 0000:00:08.3: enabling Extended Tags
[ 0.300520] pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
[ 0.300812] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.300942] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[ 0.301076] pci 0000:00:18.0: [1022:14f0] type 00 class 0x060000 conventional PCI endpoint
[ 0.301109] pci 0000:00:18.1: [1022:14f1] type 00 class 0x060000 conventional PCI endpoint
[ 0.301142] pci 0000:00:18.2: [1022:14f2] type 00 class 0x060000 conventional PCI endpoint
[ 0.301175] pci 0000:00:18.3: [1022:14f3] type 00 class 0x060000 conventional PCI endpoint
[ 0.301207] pci 0000:00:18.4: [1022:14f4] type 00 class 0x060000 conventional PCI endpoint
[ 0.301239] pci 0000:00:18.5: [1022:14f5] type 00 class 0x060000 conventional PCI endpoint
[ 0.301271] pci 0000:00:18.6: [1022:14f6] type 00 class 0x060000 conventional PCI endpoint
[ 0.301305] pci 0000:00:18.7: [1022:14f7] type 00 class 0x060000 conventional PCI endpoint
[ 0.301818] pci 0000:01:00.0: [10de:28e0] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.301842] pci 0000:01:00.0: BAR 0 [mem 0xdc000000-0xdcffffff]
[ 0.301846] pci 0000:01:00.0: BAR 1 [mem 0x6000000000-0x61ffffffff 64bit pref]
[ 0.301848] pci 0000:01:00.0: BAR 3 [mem 0x6200000000-0x6201ffffff 64bit pref]
[ 0.301851] pci 0000:01:00.0: BAR 5 [io 0xf000-0xf07f]
[ 0.301854] pci 0000:01:00.0: ROM [mem 0xdd000000-0xdd07ffff pref]
[ 0.301910] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.303056] pci 0000:01:00.1: [10de:22be] type 00 class 0x040300 PCIe Endpoint
[ 0.303080] pci 0000:01:00.1: BAR 0 [mem 0xdd080000-0xdd083fff]
[ 0.303223] pci 0000:00:01.1: PCI bridge to [bus 01-05]
[ 0.303362] pci 0000:06:00.0: [17cb:1107] type 00 class 0x028000 PCIe Endpoint
[ 0.303409] pci 0000:06:00.0: BAR 0 [mem 0xdda00000-0xddbfffff 64bit]
[ 0.303506] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.303613] pci 0000:06:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:02.2 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[ 0.303755] pci 0000:00:02.2: PCI bridge to [bus 06]
[ 0.304014] pci 0000:07:00.0: [17a0:9755] type 00 class 0x080501 PCIe Endpoint
[ 0.304219] pci 0000:07:00.0: BAR 0 [mem 0xde100000-0xde100fff]
[ 0.304578] pci 0000:07:00.0: supports D1 D2
[ 0.304579] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.305134] pci 0000:00:02.3: PCI bridge to [bus 07]
[ 0.305484] pci 0000:08:00.0: [15b7:5015] type 00 class 0x010802 PCIe Endpoint
[ 0.305520] pci 0000:08:00.0: BAR 0 [mem 0xde000000-0xde003fff 64bit]
[ 0.305826] pci 0000:00:02.4: PCI bridge to [bus 08]
[ 0.305944] pci 0000:00:04.1: PCI bridge to [bus 09-68]
[ 0.306073] pci 0000:69:00.0: [1002:15bf] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.306102] pci 0000:69:00.0: BAR 0 [mem 0x7c00000000-0x7c0fffffff 64bit pref]
[ 0.306106] pci 0000:69:00.0: BAR 2 [mem 0xdd200000-0xdd3fffff 64bit pref]
[ 0.306108] pci 0000:69:00.0: BAR 4 [io 0xe000-0xe0ff]
[ 0.306110] pci 0000:69:00.0: BAR 5 [mem 0xdd800000-0xdd87ffff]
[ 0.306118] pci 0000:69:00.0: enabling Extended Tags
[ 0.306182] pci 0000:69:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.306521] pci 0000:69:00.1: [1002:1640] type 00 class 0x040300 PCIe Legacy Endpoint
[ 0.306546] pci 0000:69:00.1: BAR 0 [mem 0xdd8c8000-0xdd8cbfff]
[ 0.306555] pci 0000:69:00.1: enabling Extended Tags
[ 0.306603] pci 0000:69:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.306873] pci 0000:69:00.2: [1022:15c7] type 00 class 0x108000 PCIe Endpoint
[ 0.306899] pci 0000:69:00.2: BAR 2 [mem 0xdd700000-0xdd7fffff]
[ 0.306903] pci 0000:69:00.2: BAR 5 [mem 0xdd8ce000-0xdd8cffff]
[ 0.306910] pci 0000:69:00.2: enabling Extended Tags
[ 0.307062] pci 0000:69:00.3: [1022:15b9] type 00 class 0x0c0330 PCIe Endpoint
[ 0.307089] pci 0000:69:00.3: BAR 0 [mem 0xdd600000-0xdd6fffff 64bit]
[ 0.307100] pci 0000:69:00.3: enabling Extended Tags
[ 0.307141] pci 0000:69:00.3: PME# supported from D0 D3hot D3cold
[ 0.307410] pci 0000:69:00.4: [1022:15ba] type 00 class 0x0c0330 PCIe Endpoint
[ 0.307436] pci 0000:69:00.4: BAR 0 [mem 0xdd500000-0xdd5fffff 64bit]
[ 0.307446] pci 0000:69:00.4: enabling Extended Tags
[ 0.307487] pci 0000:69:00.4: PME# supported from D0 D3hot D3cold
[ 0.307750] pci 0000:69:00.5: [1022:15e2] type 00 class 0x048000 PCIe Endpoint
[ 0.307776] pci 0000:69:00.5: BAR 0 [mem 0xdd880000-0xdd8bffff]
[ 0.307780] pci 0000:69:00.5: BAR 2 [mem 0x7c10000000-0x7c107fffff 64bit pref]
[ 0.307789] pci 0000:69:00.5: enabling Extended Tags
[ 0.307830] pci 0000:69:00.5: PME# supported from D0 D3hot D3cold
[ 0.308092] pci 0000:69:00.6: [1022:15e3] type 00 class 0x040300 PCIe Endpoint
[ 0.308118] pci 0000:69:00.6: BAR 0 [mem 0xdd8c0000-0xdd8c7fff]
[ 0.308128] pci 0000:69:00.6: enabling Extended Tags
[ 0.308169] pci 0000:69:00.6: PME# supported from D0 D3hot D3cold
[ 0.308431] pci 0000:69:00.7: [1022:164a] type 00 class 0x118000 PCIe Endpoint
[ 0.308458] pci 0000:69:00.7: BAR 2 [mem 0xdd400000-0xdd4fffff]
[ 0.308462] pci 0000:69:00.7: BAR 5 [mem 0xdd8cc000-0xdd8cdfff]
[ 0.308468] pci 0000:69:00.7: enabling Extended Tags
[ 0.308624] pci 0000:00:08.1: PCI bridge to [bus 69]
[ 0.308684] pci 0000:6a:00.0: [1022:14ec] type 00 class 0x130000 PCIe Endpoint
[ 0.308717] pci 0000:6a:00.0: enabling Extended Tags
[ 0.308769] pci 0000:6a:00.0: PME# supported from D3hot D3cold
[ 0.308887] pci 0000:6a:00.1: [1022:1502] type 00 class 0x118000 PCIe Endpoint
[ 0.308920] pci 0000:6a:00.1: BAR 0 [mem 0xddf00000-0xddf7ffff]
[ 0.308922] pci 0000:6a:00.1: BAR 1 [mem 0xddfc0000-0xddfc1fff]
[ 0.308926] pci 0000:6a:00.1: BAR 2 [mem 0x7c10900000-0x7c1093ffff 64bit pref]
[ 0.308928] pci 0000:6a:00.1: BAR 4 [mem 0xddf80000-0xddfbffff]
[ 0.308935] pci 0000:6a:00.1: enabling Extended Tags
[ 0.309109] pci 0000:00:08.2: PCI bridge to [bus 6a]
[ 0.309229] pci 0000:6b:00.0: [1022:14ec] type 00 class 0x130000 PCIe Endpoint
[ 0.309262] pci 0000:6b:00.0: enabling Extended Tags
[ 0.309777] pci 0000:6b:00.3: [1022:15c0] type 00 class 0x0c0330 PCIe Endpoint
[ 0.309804] pci 0000:6b:00.3: BAR 0 [mem 0xddd00000-0xdddfffff 64bit]
[ 0.309814] pci 0000:6b:00.3: enabling Extended Tags
[ 0.309857] pci 0000:6b:00.3: PME# supported from D0 D3hot D3cold
[ 0.310302] pci 0000:6b:00.4: [1022:15c1] type 00 class 0x0c0330 PCIe Endpoint
[ 0.310331] pci 0000:6b:00.4: BAR 0 [mem 0xddc00000-0xddcfffff 64bit]
[ 0.310341] pci 0000:6b:00.4: enabling Extended Tags
[ 0.310382] pci 0000:6b:00.4: PME# supported from D0 D3hot D3cold
[ 0.310823] pci 0000:6b:00.6: [1022:1669] type 00 class 0x0c0340 PCIe Endpoint
[ 0.310855] pci 0000:6b:00.6: BAR 0 [mem 0xdde00000-0xdde7ffff 64bit]
[ 0.310865] pci 0000:6b:00.6: enabling Extended Tags
[ 0.310908] pci 0000:6b:00.6: PME# supported from D0 D3hot D3cold
[ 0.311367] pci 0000:00:08.3: PCI bridge to [bus 6b]
[ 0.326531] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.326629] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.326723] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.326807] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.326890] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.326962] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.327035] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.327095] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.329202] Low-power S0 idle used by default for system suspend
[ 0.329646] ACPI: EC: interrupt unblocked
[ 0.329647] ACPI: EC: event unblocked
[ 0.329655] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.329656] ACPI: EC: GPE=0x10
[ 0.329657] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot ECDT EC initialization complete
[ 0.329658] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
[ 0.330016] iommu: Default domain type: Translated
[ 0.330016] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.330119] SCSI subsystem initialized
[ 0.330123] libata version 3.00 loaded.
[ 0.330123] ACPI: bus type USB registered
[ 0.330123] usbcore: registered new interface driver usbfs
[ 0.330123] usbcore: registered new interface driver hub
[ 0.330123] usbcore: registered new device driver usb
[ 0.385035] EDAC MC: Ver: 3.0.0
[ 0.385437] efivars: Registered efivars operations
[ 0.385437] NetLabel: Initializing
[ 0.385437] NetLabel: domain hash size = 128
[ 0.385437] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.385437] NetLabel: unlabeled traffic allowed by default
[ 0.385437] mctp: management component transport protocol core
[ 0.385437] NET: Registered PF_MCTP protocol family
[ 0.385437] PCI: Using ACPI for IRQ routing
[ 0.394452] PCI: pci_cache_line_size set to 64 bytes
[ 0.394863] e820: register RAM buffer resource [mem 0x09a7f000-0x0bffffff]
[ 0.394872] e820: register RAM buffer resource [mem 0x0a200000-0x0bffffff]
[ 0.394873] e820: register RAM buffer resource [mem 0xa8a8b000-0xabffffff]
[ 0.394874] e820: register RAM buffer resource [mem 0xa90e5000-0xabffffff]
[ 0.394875] e820: register RAM buffer resource [mem 0xae2ff000-0xafffffff]
[ 0.394875] e820: register RAM buffer resource [mem 0xbbff9000-0xbbffffff]
[ 0.394876] e820: register RAM buffer resource [mem 0xbbfff000-0xbbffffff]
[ 0.394877] e820: register RAM buffer resource [mem 0x41e300000-0x41fffffff]
[ 0.395034] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.395034] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.395038] pci 0000:69:00.0: vgaarb: setting as boot VGA device
[ 0.395039] pci 0000:69:00.0: vgaarb: bridge control possible
[ 0.395040] pci 0000:69:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.395044] vgaarb: loaded
[ 0.395046] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.395046] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.397062] clocksource: Switched to clocksource tsc-early
[ 0.397188] VFS: Disk quotas dquot_6.6.0
[ 0.397196] VFS: Dquot-cache hash table entries: 512 (4096 bytes)
[ 0.397245] acpi PNP0C01:00: Reserved [mem 0xe0000000-0xefffffff]
[ 0.397268] acpi PNP0C02:00: Reserved [mem 0xfd300000-0xfd3fffff]
[ 0.397443] acpi PNP0C02:01: Skipped [io 0x0010-0x001f]
[ 0.397445] acpi PNP0C02:01: Skipped [io 0x0022-0x003f]
[ 0.397446] acpi PNP0C02:01: Skipped [io 0x0063]
[ 0.397447] acpi PNP0C02:01: Skipped [io 0x0065]
[ 0.397448] acpi PNP0C02:01: Skipped [io 0x0067-0x006f]
[ 0.397449] acpi PNP0C02:01: Skipped [io 0x0072-0x007f]
[ 0.397450] acpi PNP0C02:01: Skipped [io 0x0080]
[ 0.397451] acpi PNP0C02:01: Skipped [io 0x0084-0x0086]
[ 0.397452] acpi PNP0C02:01: Skipped [io 0x0088]
[ 0.397453] acpi PNP0C02:01: Skipped [io 0x008c-0x008e]
[ 0.397454] acpi PNP0C02:01: Skipped [io 0x0090-0x009f]
[ 0.397455] acpi PNP0C02:01: Skipped [io 0x00a2-0x00bf]
[ 0.397456] acpi PNP0C02:01: Skipped [io 0x00b1]
[ 0.397456] acpi PNP0C02:01: Skipped [io 0x00e0-0x00ef]
[ 0.397458] acpi PNP0C02:01: Reserved [io 0x04d0-0x04d1]
[ 0.397459] acpi PNP0C02:01: Reserved [io 0x040b]
[ 0.397460] acpi PNP0C02:01: Reserved [io 0x04d6]
[ 0.397461] acpi PNP0C02:01: Reserved [io 0x0c00-0x0c01]
[ 0.397462] acpi PNP0C02:01: Reserved [io 0x0c14]
[ 0.397463] acpi PNP0C02:01: Reserved [io 0x0c50-0x0c51]
[ 0.397465] acpi PNP0C02:01: Reserved [io 0x0c52]
[ 0.397466] acpi PNP0C02:01: Reserved [io 0x0c6c]
[ 0.397467] acpi PNP0C02:01: Reserved [io 0x0c6f]
[ 0.397468] acpi PNP0C02:01: Reserved [io 0x0cd0-0x0cd1]
[ 0.397470] acpi PNP0C02:01: Reserved [io 0x0cd2-0x0cd3]
[ 0.397471] acpi PNP0C02:01: Reserved [io 0x0cd4-0x0cd5]
[ 0.397472] acpi PNP0C02:01: Reserved [io 0x0cd6-0x0cd7]
[ 0.397473] acpi PNP0C02:01: Reserved [io 0x0cd8-0x0cdf]
[ 0.397474] acpi PNP0C02:01: Reserved [io 0x0800-0x089f]
[ 0.397475] acpi PNP0C02:01: Reserved [io 0x0b00-0x0b0f]
[ 0.397476] acpi PNP0C02:01: Reserved [io 0x0b20-0x0b3f]
[ 0.397477] acpi PNP0C02:01: Reserved [io 0x0900-0x090f]
[ 0.397478] acpi PNP0C02:01: Reserved [io 0x0910-0x091f]
[ 0.397479] acpi PNP0C02:01: Could not reserve [mem 0xfec00000-0xfec00fff]
[ 0.397480] acpi PNP0C02:01: Could not reserve [mem 0xfec01000-0xfec01fff]
[ 0.397482] acpi PNP0C02:01: Reserved [mem 0xfedc0000-0xfedc0fff]
[ 0.397483] acpi PNP0C02:01: Reserved [mem 0xfee00000-0xfee00fff]
[ 0.397484] acpi PNP0C02:01: Could not reserve [mem 0xfed80000-0xfed8ffff]
[ 0.397485] acpi PNP0C02:01: Reserved [mem 0xfec10000-0xfec10fff]
[ 0.397487] acpi PNP0C02:01: Reserved [mem 0xff000000-0xffffffff]
[ 0.397517] pnp: PnP ACPI init
[ 0.402407] pnp: PnP ACPI: found 0 devices
[ 0.408242] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.408336] NET: Registered PF_INET protocol family
[ 0.408442] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.411181] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.411197] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.411242] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.411377] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.411434] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.411492] MPTCP token hash table entries: 16384 (order: 7, 393216 bytes, linear)
[ 0.411527] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.411574] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.411581] NET: Registered PF_XDP protocol family
[ 0.411591] pci 0000:00:01.1: PCI bridge to [bus 01-05]
[ 0.411605] pci 0000:00:01.1: bridge window [io 0xf000-0xffff]
[ 0.411612] pci 0000:00:01.1: bridge window [mem 0xdc000000-0xdd0fffff]
[ 0.411617] pci 0000:00:01.1: bridge window [mem 0x6000000000-0x6801ffffff 64bit pref]
[ 0.411624] pci 0000:00:02.2: PCI bridge to [bus 06]
[ 0.411630] pci 0000:00:02.2: bridge window [mem 0xdda00000-0xddbfffff]
[ 0.411642] pci 0000:00:02.3: PCI bridge to [bus 07]
[ 0.411648] pci 0000:00:02.3: bridge window [mem 0xde100000-0xde1fffff]
[ 0.411657] pci 0000:00:02.4: PCI bridge to [bus 08]
[ 0.411662] pci 0000:00:02.4: bridge window [mem 0xde000000-0xde0fffff]
[ 0.411674] pci 0000:00:04.1: PCI bridge to [bus 09-68]
[ 0.411678] pci 0000:00:04.1: bridge window [io 0xa000-0xdfff]
[ 0.411685] pci 0000:00:04.1: bridge window [mem 0xc4000000-0xdbffffff]
[ 0.411690] pci 0000:00:04.1: bridge window [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.411700] pci 0000:00:08.1: PCI bridge to [bus 69]
[ 0.411702] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.411709] pci 0000:00:08.1: bridge window [mem 0xdd200000-0xdd8fffff]
[ 0.411712] pci 0000:00:08.1: bridge window [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.411716] pci 0000:00:08.2: PCI bridge to [bus 6a]
[ 0.411719] pci 0000:00:08.2: bridge window [mem 0xddf00000-0xddffffff]
[ 0.411721] pci 0000:00:08.2: bridge window [mem 0x7c10900000-0x7c109fffff 64bit pref]
[ 0.411726] pci 0000:00:08.3: PCI bridge to [bus 6b]
[ 0.411729] pci 0000:00:08.3: bridge window [mem 0xddc00000-0xddefffff]
[ 0.411735] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.411737] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.411738] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff window]
[ 0.411739] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.411740] pci_bus 0000:00: resource 8 [mem 0xfa000000-0xfcffffff window]
[ 0.411741] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xf9ffffff window]
[ 0.411742] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff window]
[ 0.411743] pci_bus 0000:00: resource 11 [mem 0x440000000-0x7fffffffff window]
[ 0.411745] pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
[ 0.411746] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdd0fffff]
[ 0.411747] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x6801ffffff 64bit pref]
[ 0.411748] pci_bus 0000:06: resource 1 [mem 0xdda00000-0xddbfffff]
[ 0.411749] pci_bus 0000:07: resource 1 [mem 0xde100000-0xde1fffff]
[ 0.411751] pci_bus 0000:08: resource 1 [mem 0xde000000-0xde0fffff]
[ 0.411752] pci_bus 0000:09: resource 0 [io 0xa000-0xdfff]
[ 0.411753] pci_bus 0000:09: resource 1 [mem 0xc4000000-0xdbffffff]
[ 0.411754] pci_bus 0000:09: resource 2 [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.411755] pci_bus 0000:69: resource 0 [io 0xe000-0xefff]
[ 0.411756] pci_bus 0000:69: resource 1 [mem 0xdd200000-0xdd8fffff]
[ 0.411757] pci_bus 0000:69: resource 2 [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.411758] pci_bus 0000:6a: resource 1 [mem 0xddf00000-0xddffffff]
[ 0.411759] pci_bus 0000:6a: resource 2 [mem 0x7c10900000-0x7c109fffff 64bit pref]
[ 0.411760] pci_bus 0000:6b: resource 1 [mem 0xddc00000-0xddefffff]
[ 0.411880] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.411904] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.412213] pci 0000:69:00.1: D0 power state depends on 0000:69:00.0
[ 0.412244] pci 0000:00:08.1: can't derive routing for PCI INT A
[ 0.412245] pci 0000:00:08.1: PCI INT A: not connected
[ 0.412491] pci 0000:00:08.3: can't derive routing for PCI INT A
[ 0.412492] pci 0000:00:08.3: PCI INT A: not connected
[ 0.412699] PCI: CLS 64 bytes, default 64
[ 0.412735] Trying to unpack rootfs image as initramfs...
[ 0.412756] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.412833] pci 0000:00:01.0: Adding to iommu group 0
[ 0.412861] pci 0000:00:01.1: Adding to iommu group 1
[ 0.412916] pci 0000:00:02.0: Adding to iommu group 2
[ 0.412944] pci 0000:00:02.2: Adding to iommu group 3
[ 0.412962] pci 0000:00:02.3: Adding to iommu group 4
[ 0.412979] pci 0000:00:02.4: Adding to iommu group 5
[ 0.412997] pci 0000:00:03.0: Adding to iommu group 6
[ 0.413035] pci 0000:00:04.0: Adding to iommu group 7
[ 0.413064] pci 0000:00:04.1: Adding to iommu group 7
[ 0.413118] pci 0000:00:08.0: Adding to iommu group 8
[ 0.413135] pci 0000:00:08.1: Adding to iommu group 9
[ 0.413152] pci 0000:00:08.2: Adding to iommu group 10
[ 0.413168] pci 0000:00:08.3: Adding to iommu group 11
[ 0.413192] pci 0000:00:14.0: Adding to iommu group 12
[ 0.413204] pci 0000:00:14.3: Adding to iommu group 12
[ 0.413263] pci 0000:00:18.0: Adding to iommu group 13
[ 0.413276] pci 0000:00:18.1: Adding to iommu group 13
[ 0.413288] pci 0000:00:18.2: Adding to iommu group 13
[ 0.413301] pci 0000:00:18.3: Adding to iommu group 13
[ 0.413314] pci 0000:00:18.4: Adding to iommu group 13
[ 0.413328] pci 0000:00:18.5: Adding to iommu group 13
[ 0.413340] pci 0000:00:18.6: Adding to iommu group 13
[ 0.413353] pci 0000:00:18.7: Adding to iommu group 13
[ 0.413397] pci 0000:01:00.0: Adding to iommu group 14
[ 0.413437] pci 0000:01:00.1: Adding to iommu group 14
[ 0.413452] pci 0000:06:00.0: Adding to iommu group 15
[ 0.413470] pci 0000:07:00.0: Adding to iommu group 16
[ 0.413488] pci 0000:08:00.0: Adding to iommu group 17
[ 0.413533] pci 0000:69:00.0: Adding to iommu group 18
[ 0.413555] pci 0000:69:00.1: Adding to iommu group 19
[ 0.413578] pci 0000:69:00.2: Adding to iommu group 20
[ 0.413596] pci 0000:69:00.3: Adding to iommu group 21
[ 0.413621] pci 0000:69:00.4: Adding to iommu group 22
[ 0.413655] pci 0000:69:00.5: Adding to iommu group 23
[ 0.413688] pci 0000:69:00.6: Adding to iommu group 24
[ 0.413712] pci 0000:69:00.7: Adding to iommu group 25
[ 0.413744] pci 0000:6a:00.0: Adding to iommu group 26
[ 0.413781] pci 0000:6a:00.1: Adding to iommu group 27
[ 0.413806] pci 0000:6b:00.0: Adding to iommu group 28
[ 0.413833] pci 0000:6b:00.3: Adding to iommu group 29
[ 0.413857] pci 0000:6b:00.4: Adding to iommu group 30
[ 0.413875] pci 0000:6b:00.6: Adding to iommu group 31
[ 0.416324] AMD-Vi: Extended features (0x246577efa2254afa, 0x0): PPR NX GT [5] IA GA PC GA_vAPIC
[ 0.416334] AMD-Vi: Interrupt remapping enabled
[ 0.416553] AMD-Vi: Virtual APIC enabled
[ 0.416610] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.416613] software IO TLB: mapped [mem 0x00000000a9a8e000-0x00000000ada8e000] (64MB)
[ 0.416640] LVT offset 0 assigned for vector 0x400
[ 0.417176] perf: AMD IBS detected (0x00000bff)
[ 0.417186] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.419328] Initialise system trusted keyrings
[ 0.419342] Key type blacklist registered
[ 0.419382] workingset: timestamp_bits=36 (anon: 31) max_order=22 bucket_order=0 (anon: 0)
[ 0.419873] fuse: init (API version 7.45)
[ 0.419945] integrity: Platform Keyring initialized
[ 0.419947] integrity: Machine keyring initialized
[ 0.424037] Key type asymmetric registered
[ 0.424039] Asymmetric key parser 'x509' registered
[ 0.424055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.424106] io scheduler mq-deadline registered
[ 0.424107] io scheduler kyber registered
[ 0.424108] Adaptive Deadline I/O Scheduler 3.3.0 by Masahito Suzuki
[ 0.424109] io scheduler adios registered
[ 0.424122] io scheduler bfq registered
[ 0.425875] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.426123] pcieport 0000:00:01.1: PME: Signaling with IRQ 31
[ 0.426198] pcieport 0000:00:01.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.426591] pcieport 0000:00:02.2: PME: Signaling with IRQ 32
[ 0.426879] pcieport 0000:00:02.3: PME: Signaling with IRQ 33
[ 0.427147] pcieport 0000:00:02.4: PME: Signaling with IRQ 34
[ 0.427365] pcieport 0000:00:04.1: PME: Signaling with IRQ 35
[ 0.427438] pcieport 0000:00:04.1: AER: enabled with IRQ 35
[ 0.427460] pcieport 0000:00:04.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.427915] pcieport 0000:00:08.1: PME: Signaling with IRQ 36
[ 0.428048] pcieport 0000:00:08.2: can't derive routing for PCI INT A
[ 0.428050] pcieport 0000:00:08.2: PCI INT A: not connected
[ 0.428131] pcieport 0000:00:08.2: PME: Signaling with IRQ 37
[ 0.428253] pcieport 0000:00:08.3: PME: Signaling with IRQ 38
[ 0.429689] ACPI: AC: AC Adapter [AC0] (on-line)
[ 0.429742] input: Lid Switch as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/PNP0C0D:00/input/input0
[ 0.429759] ACPI: button: Lid Switch [LID]
[ 0.429791] input: Power Button as /devices/platform/PNP0C0C:00/input/input1
[ 0.429808] ACPI: button: Power Button [PWRB]
[ 0.429839] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input2
[ 0.429853] ACPI: button: Sleep Button [SLPB]
[ 0.429888] Monitor-Mwait will be used to enter C-1 state
[ 0.430576] ACPI: Enabled processor.bm_check_disable for AMD cpuidle
[ 0.432661] Estimated ratio of average max frequency by base frequency (times 1024): 1185
[ 0.434294] acpi LNXTHERM:00: registered as thermal_zone0
[ 0.434297] ACPI: thermal: Thermal Zone [THRM] (60 C)
[ 0.434409] acpi LNXTHERM:01: registered as thermal_zone1
[ 0.434410] ACPI: thermal: Thermal Zone [TZ01] (20 C)
[ 0.434656] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.435084] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.438536] ACPI: battery: Slot [BAT0] (battery present)
[ 0.438601] Non-volatile memory driver v1.3
[ 0.532171] tpm_crb_acpi MSFT0101:00: Disabling hwrng
[ 0.532553] ACPI: bus type drm_connector registered
[ 0.534658] xhci_hcd 0000:69:00.3: xHCI Host Controller
[ 0.534664] xhci_hcd 0000:69:00.3: new USB bus registered, assigned bus number 1
[ 0.535147] xhci_hcd 0000:69:00.3: hcc params 0x0128ffc5 hci version 0x120 quirks 0x0000000200000010
[ 0.535376] xhci_hcd 0000:69:00.3: xHCI Host Controller
[ 0.535378] xhci_hcd 0000:69:00.3: new USB bus registered, assigned bus number 2
[ 0.535380] xhci_hcd 0000:69:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.535393] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.02
[ 0.535410] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.535411] usb usb1: Product: xHCI Host Controller
[ 0.535413] usb usb1: Manufacturer: Linux 7.2.6-1-cachyos xhci-hcd
[ 0.535414] usb usb1: SerialNumber: 0000:69:00.3
[ 0.535548] hub 1-0:1.0: USB hub found
[ 0.535575] hub 1-0:1.0: 5 ports detected
[ 0.536496] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.536497] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.02
[ 0.536513] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536514] usb usb2: Product: xHCI Host Controller
[ 0.536515] usb usb2: Manufacturer: Linux 7.2.6-1-cachyos xhci-hcd
[ 0.536516] usb usb2: SerialNumber: 0000:69:00.3
[ 0.536590] hub 2-0:1.0: USB hub found
[ 0.536605] hub 2-0:1.0: 2 ports detected
[ 0.536969] xhci_hcd 0000:69:00.4: xHCI Host Controller
[ 0.536973] xhci_hcd 0000:69:00.4: new USB bus registered, assigned bus number 3
[ 0.537417] xhci_hcd 0000:69:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 0.537634] xhci_hcd 0000:69:00.4: xHCI Host Controller
[ 0.537636] xhci_hcd 0000:69:00.4: new USB bus registered, assigned bus number 4
[ 0.537638] xhci_hcd 0000:69:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.537647] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.02
[ 0.537660] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.537661] usb usb3: Product: xHCI Host Controller
[ 0.537663] usb usb3: Manufacturer: Linux 7.2.6-1-cachyos xhci-hcd
[ 0.537664] usb usb3: SerialNumber: 0000:69:00.4
[ 0.537732] hub 3-0:1.0: USB hub found
[ 0.537746] hub 3-0:1.0: 1 port detected
[ 0.537904] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.537906] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.02
[ 0.537918] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.537919] usb usb4: Product: xHCI Host Controller
[ 0.537920] usb usb4: Manufacturer: Linux 7.2.6-1-cachyos xhci-hcd
[ 0.537921] usb usb4: SerialNumber: 0000:69:00.4
[ 0.537985] hub 4-0:1.0: USB hub found
[ 0.538000] hub 4-0:1.0: 1 port detected
[ 0.538270] xhci_hcd 0000:6b:00.3: xHCI Host Controller
[ 0.538274] xhci_hcd 0000:6b:00.3: new USB bus registered, assigned bus number 5
[ 0.538607] xhci_hcd 0000:6b:00.3: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 0.538970] xhci_hcd 0000:6b:00.3: xHCI Host Controller
[ 0.538972] xhci_hcd 0000:6b:00.3: new USB bus registered, assigned bus number 6
[ 0.538974] xhci_hcd 0000:6b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.538984] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.02
[ 0.538998] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.538999] usb usb5: Product: xHCI Host Controller
[ 0.539000] usb usb5: Manufacturer: Linux 7.2.6-1-cachyos xhci-hcd
[ 0.539001] usb usb5: SerialNumber: 0000:6b:00.3
[ 0.539066] hub 5-0:1.0: USB hub found
[ 0.539084] hub 5-0:1.0: 1 port detected
[ 0.539243] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.539245] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.02
[ 0.539256] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.539258] usb usb6: Product: xHCI Host Controller
[ 0.539259] usb usb6: Manufacturer: Linux 7.2.6-1-cachyos xhci-hcd
[ 0.539260] usb usb6: SerialNumber: 0000:6b:00.3
[ 0.539322] hub 6-0:1.0: USB hub found
[ 0.539338] hub 6-0:1.0: 1 port detected
[ 0.539832] xhci_hcd 0000:6b:00.4: xHCI Host Controller
[ 0.539835] xhci_hcd 0000:6b:00.4: new USB bus registered, assigned bus number 7
[ 0.540200] xhci_hcd 0000:6b:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 0.540818] xhci_hcd 0000:6b:00.4: xHCI Host Controller
[ 0.540820] xhci_hcd 0000:6b:00.4: new USB bus registered, assigned bus number 8
[ 0.540823] xhci_hcd 0000:6b:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.540839] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.02
[ 0.540852] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.540853] usb usb7: Product: xHCI Host Controller
[ 0.540854] usb usb7: Manufacturer: Linux 7.2.6-1-cachyos xhci-hcd
[ 0.540855] usb usb7: SerialNumber: 0000:6b:00.4
[ 0.541004] hub 7-0:1.0: USB hub found
[ 0.541027] hub 7-0:1.0: 1 port detected
[ 0.541780] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.541783] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.02
[ 0.541810] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.541813] usb usb8: Product: xHCI Host Controller
[ 0.541816] usb usb8: Manufacturer: Linux 7.2.6-1-cachyos xhci-hcd
[ 0.541818] usb usb8: SerialNumber: 0000:6b:00.4
[ 0.542106] hub 8-0:1.0: USB hub found
[ 0.542128] hub 8-0:1.0: 1 port detected
[ 0.543248] usbcore: registered new interface driver usbserial_generic
[ 0.543258] usbserial: USB Serial support registered for generic
[ 0.543291] i8042: PNP: No PS/2 controller found.
[ 0.543558] rtc_cmos PNP0B00:00: RTC can wake from S4
[ 0.543920] rtc_cmos PNP0B00:00: registered as rtc0
[ 0.543968] rtc_cmos PNP0B00:00: setting system clock to 2026-09-22T16:05:19 UTC (1790093119)
[ 0.544012] rtc_cmos PNP0B00:00: alarms up to one month, y3k, 114 bytes nvram
[ 0.545482] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
[ 0.545498] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[ 0.547902] Freeing initrd memory: 115520K
[ 0.548147] fbcon: Deferring console take-over
[ 0.548150] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.548214] hid: raw HID events driver (C) Jiri Kosina
[ 0.548256] usbcore: registered new interface driver usbhid
[ 0.548258] usbhid: USB HID core driver
[ 0.548461] drop_monitor: Initializing network drop monitor service
[ 0.548662] NET: Registered PF_INET6 protocol family
[ 0.549036] Segment Routing with IPv6
[ 0.549038] RPL Segment Routing with IPv6
[ 0.549050] In-situ OAM (IOAM) with IPv6
[ 0.549083] NET: Registered PF_PACKET protocol family
[ 0.550753] x86/amd: Previous system reset reason [0x00200800]: ACPI power state transition occurred
[ 0.550762] AGESA: AGESA!V9 PhoenixPI-FP8-FP7 1.0.0.2
[ 0.550774] microcode: Current revision: 0x0a704108
[ 0.550776] microcode: Updated early from: 0x0a704107
[ 0.551091] resctrl: L3 allocation detected
[ 0.551093] resctrl: MB allocation detected
[ 0.551094] resctrl: SMBA allocation detected
[ 0.551095] resctrl: L3 monitoring detected
[ 0.551119] IPI shorthand broadcast: enabled
[ 0.554935] Piece-Of-Cake (POC) CPU Selector 2.6.3 by Masahito Suzuki [CTZ: HW (TZCNT), PTSelect: HW (PDEP)]
[ 0.554962] sched_clock: Marking stable (552169458, 2437258)->(571583513, -16976797)
[ 0.555245] registered taskstats version 1
[ 0.556046] Loading compiled-in X.509 certificates
[ 0.561989] Loaded X.509 cert 'Build time autogenerated kernel key: 22b17df8eddf361a8da3ef194df04e16824f4b93'
[ 0.564884] zswap: loaded using pool zstd
[ 0.564950] Demotion targets for Node 0: null
[ 0.565062] Key type .fscrypt registered
[ 0.565064] Key type fscrypt-provisioning registered
[ 0.565369] Btrfs loaded, zoned=yes, fsverity=yes
[ 0.565431] Key type big_key registered
[ 0.565627] integrity: Loading X.509 certificate: UEFI:db
[ 0.569458] integrity: Loaded X.509 cert 'Database Key: 377080df5f3f4fd543f2b3742e69d841'
[ 0.569461] integrity: Loading X.509 certificate: UEFI:db
[ 0.569484] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.569486] integrity: Loading X.509 certificate: UEFI:db
[ 0.569503] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.569505] integrity: Loading X.509 certificate: UEFI:db
[ 0.569520] integrity: Loaded X.509 cert 'Microsoft Option ROM UEFI CA 2023: 514fbf937fa46fb57bf07af8bed84b3b864b1711'
[ 0.569522] integrity: Loading X.509 certificate: UEFI:db
[ 0.569537] integrity: Loaded X.509 cert 'Microsoft UEFI CA 2023: 81aa6b3244c935bce0d6628af39827421e32497d'
[ 0.569539] integrity: Loading X.509 certificate: UEFI:db
[ 0.569553] integrity: Loaded X.509 cert 'Microsoft Corporation: Windows UEFI CA 2023: aefc5fbbbe055d8f8daa585473499417ab5a5272'
[ 0.569927] PM: Magic number: 10:881:85
[ 0.570141] RAS: Correctable Errors collector initialized.
[ 0.570709] clk: Disabling unused clocks
[ 0.570711] PM: genpd: Disabling unused power domains
[ 0.571849] Freeing unused decrypted memory: 2028K
[ 0.572274] Freeing unused kernel image (initmem) memory: 4828K
[ 0.572288] Write protecting the kernel read-only data: 43008k
[ 0.572641] Freeing unused kernel image (text/rodata gap) memory: 1840K
[ 0.572763] Freeing unused kernel image (rodata/data gap) memory: 1264K
[ 0.604313] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.604317] rodata_test: all tests were successful
[ 0.604328] Run /init as init process
[ 0.604329] with arguments:
[ 0.604331] /init
[ 0.604332] splash
[ 0.604332] with environment:
[ 0.604333] HOME=/
[ 0.604334] TERM=linux
[ 0.618455] systemd[1]: Successfully made /usr/ read-only.
[ 0.770299] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 0.778302] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 0.893684] usb 1-2: New USB device found, idVendor=3151, idProduct=5029, bcdDevice= 5.00
[ 0.896180] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.896183] usb 1-2: Product: MG68
[ 0.896186] usb 1-2: Manufacturer:
[ 0.899407] input: MG68 as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2:1.0/0003:3151:5029.0001/input/input3
[ 0.906126] usb 3-1: New USB device found, idVendor=3277, idProduct=0018, bcdDevice= 0.03
[ 0.920494] usb 3-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 0.920497] usb 3-1: Product: USB2.0 FHD UVC WebCam
[ 0.920499] usb 3-1: Manufacturer: Sonix Technology Co., Ltd.
[ 0.952308] systemd[1]: systemd 261.3-1-arch running in system mode (+PAM +AUDIT -SELINUX +APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP +LIBARCHIVE)
[ 0.952316] systemd[1]: Detected architecture x86-64.
[ 0.952320] systemd[1]: Running in initrd.
[ 0.952542] systemd[1]: Initializing machine ID from random generator.
[ 0.977493] systemd[1]: Queued start job for default target Initrd Default Target.
[ 0.977918] hid-generic 0003:3151:5029.0001: input,hidraw0: USB HID v1.11 Keyboard [ MG68] on usb-0000:69:00.3-2/input0
[ 0.978922] hid-generic 0003:3151:5029.0002: ignoring exceeding usage max
[ 0.979203] input: MG68 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2:1.1/0003:3151:5029.0002/input/input4
[ 0.983076] systemd[1]: Created slice Slice /system/systemd-cryptsetup.
[ 0.983107] systemd[1]: Expecting device /dev/disk/by-uuid/<LUKS_UUID_REDACTED>...
[ 0.983110] systemd[1]: Expecting device /dev/mapper/luks-<LUKS_UUID_REDACTED>...
[ 0.983120] systemd[1]: Reached target Slice Units.
[ 0.983127] systemd[1]: Reached target Swaps.
[ 0.983133] systemd[1]: Reached target Timer Units.
[ 0.983182] systemd[1]: Listening on Journal Socket (/dev/log).
[ 0.983224] systemd[1]: Listening on Journal Sockets.
[ 0.983258] systemd[1]: Listening on udev Control Socket.
[ 0.983280] systemd[1]: Listening on udev Kernel Socket.
[ 0.983286] systemd[1]: Reached target Socket Units.
[ 0.983709] systemd[1]: Starting Create List of Static Device Nodes...
[ 0.984817] systemd[1]: Starting Journal Service...
[ 0.985247] systemd[1]: Starting Load Kernel Modules...
[ 0.985280] systemd[1]: TPM PCR OS Separator skipped, unmet condition check ConditionSecurity=measured-os
[ 0.985289] systemd[1]: TPM PCR Barrier (initrd) skipped, unmet condition check ConditionSecurity=measured-os
[ 0.985653] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 0.986403] systemd[1]: Starting Coldplug All udev Devices...
[ 0.987157] systemd[1]: Starting Virtual Console Setup...
[ 0.988433] systemd[1]: Finished Create List of Static Device Nodes.
[ 0.989738] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 0.989902] systemd[1]: Reached target Preparation for Local File Systems.
[ 0.989910] systemd[1]: Reached target Local File Systems.
[ 0.990539] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 0.993542] systemd[1]: Finished Virtual Console Setup.
[ 0.994048] systemd-journald[184]: Collecting audit messages is disabled.
[ 0.994851] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WQ00 data block query control method not found
[ 0.998871] ACPI: video: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 1.002854] input: Video Bus as /devices/pci0000:00/0000:00:01.1/acpi.video_bus.0/input/input9
[ 1.006031] systemd[1]: Started Rule-based Manager for Device Events and Files.
[ 1.031503] input: MG68 System Control as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2:1.1/0003:3151:5029.0002/input/input5
[ 1.031734] input: MG68 Keyboard as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2:1.1/0003:3151:5029.0002/input/input6
[ 1.031895] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.032002] input: MG68 Mouse as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2:1.1/0003:3151:5029.0002/input/input7
[ 1.032009] input: Video Bus as /devices/pci0000:00/0000:00:08.1/acpi.video_bus.1/input/input10
[ 1.032045] input: MG68 as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2:1.1/0003:3151:5029.0002/input/input8
[ 1.032161] hid-generic 0003:3151:5029.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [ MG68] on usb-0000:69:00.3-2/input1
[ 1.033272] hid-generic 0003:3151:5029.0003: hiddev97,hidraw2: USB HID v1.11 Device [ MG68] on usb-0000:69:00.3-2/input2
[ 1.036798] systemd[1]: Started Journal Service.
[ 1.038929] nvidia: loading out-of-tree module taints kernel.
[ 1.120543] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[ 1.123942] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[ 1.124152] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[ 1.145447] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[ 1.172281] ccp 0000:69:00.2: enabling device (0000 -> 0002)
[ 1.173859] ccp 0000:69:00.2: tee enabled
[ 1.174251] ccp 0000:69:00.2: psp enabled
[ 1.278418] usb 1-3: New USB device found, idVendor=0b05, idProduct=19b6, bcdDevice= 0.02
[ 1.293353] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.293361] usb 1-3: Product: N-KEY Device
[ 1.293364] usb 1-3: Manufacturer: ASUSTeK Computer Inc.
[ 1.315881] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0004/input/input11
[ 1.316080] input: ASUSTeK Computer Inc. N-KEY Device Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0004/input/input12
[ 1.366673] input: ASUSTeK Computer Inc. N-KEY Device Wireless Radio Control as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0004/input/input13
[ 1.367187] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0004/input/input14
[ 1.367346] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0004/input/input15
[ 1.367703] hid-generic 0003:0B05:19B6.0004: input,hiddev98,hidraw3: USB HID v1.10 Device [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input0
[ 1.376068] hid-generic 0003:0B05:19B6.0005: hiddev99,hidraw4: USB HID v1.10 Device [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input1
[ 1.383769] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.2/0003:0B05:19B6.0006/input/input16
[ 1.417462] tsc: Refined TSC clocksource calibration: 3992.495 MHz
[ 1.417469] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x731956d9b7a, max_idle_ns: 881590693066 ns
[ 1.417913] clocksource: Switched to clocksource tsc
[ 1.451368] hid-generic 0003:0B05:19B6.0006: input,hidraw5: USB HID v1.10 Keyboard [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input2
[ 1.458769] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.3/0003:0B05:19B6.0007/input/input17
[ 1.459216] hid-generic 0003:0B05:19B6.0007: input,hidraw6: USB HID v1.10 Mouse [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input3
[ 1.570470] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[ 1.698379] usb 1-4: New USB device found, idVendor=0489, idProduct=e10a, bcdDevice= 0.01
[ 1.706379] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.049632] clocksource: Watchdog remote CPU 2 read timed out
[ 2.347150] NVRM: loading NVIDIA UNIX Open Kernel Module for x86_64 615.71.09 Release Build (notroot@) Wed Sep 16 15:44:25 UTC 2026
[ 2.350249] Key type psk registered
[ 2.358461] sdhci-pci 0000:07:00.0: SDHCI controller found [17a0:9755] (rev 1)
[ 2.358520] nvme 0000:08:00.0: platform quirk: setting simple suspend
[ 2.358554] sdhci-pci 0000:07:00.0: enabling device (0000 -> 0002)
[ 2.358601] nvme nvme0: pci function 0000:08:00.0
[ 2.371188] nvidia-modeset: Loading NVIDIA UNIX Open Kernel Mode Setting Driver for x86_64 615.71.09 Release Build (notroot@) Wed Sep 16 15:44:15 UTC 2026
[ 2.383786] mmc0: SDHCI controller on PCI [0000:07:00.0] using ADMA 64-bit
[ 2.390951] nvme nvme0: passthrough uses implicit buffer lengths
[ 2.392960] nvme nvme0: allocated 64 MiB host memory buffer (1 segment).
[ 2.395909] nvme nvme0: 16/0/0 default/read/poll queues
[ 2.409075] nvme0n1: p1 p2 p3 p5 p6 p7 p8
[ 2.430797] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 2.443673] asus 0003:0B05:19B6.0004: Fixing up Asus N-Key report descriptor
[ 2.444499] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0004/input/input18
[ 2.468638] device-mapper: uevent: version 1.0.3
[ 2.468702] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[ 2.473610] nvidia-modeset: nvidia-modeset: ACPI reported no NVIDIA native backlight available; attempting to use ACPI backlight.
[ 2.477638] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DP-0
[ 2.490758] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device DP-0
[ 2.494947] [drm] Initialized nvidia-drm 0.0.0 for 0000:01:00.0 on minor 1
[ 2.495208] nvidia 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 2.495656] asus 0003:0B05:19B6.0004: input,hiddev98,hidraw3: USB HID v1.10 Device [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input0
[ 2.519649] asus 0003:0B05:19B6.0005: hiddev99,hidraw4: USB HID v1.10 Device [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input1
[ 2.573741] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.2/0003:0B05:19B6.0006/input/input19
[ 2.645218] asus 0003:0B05:19B6.0006: input,hidraw5: USB HID v1.10 Keyboard [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input2
[ 2.650757] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.3/0003:0B05:19B6.0007/input/input20
[ 2.651500] asus 0003:0B05:19B6.0007: input,hidraw6: USB HID v1.10 Mouse [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input3
[ 3.050506] mmc0: new UHS-I speed SDR104 SDXC card at address aaaa
[ 3.060333] mmcblk0: mmc0:aaaa SD128 119 GiB
[ 3.062801] mmcblk0: p1
[ 4.170704] Key type trusted registered
[ 4.172574] Key type encrypted registered
[ 4.203692] BTRFS: device label CachyOS devid 1 transid 12211 /dev/mapper/luks-<LUKS_UUID_REDACTED> (253:0) scanned by mount (329)
[ 4.204010] BTRFS info (device dm-0): first mount of filesystem <BTRFS_UUID_REDACTED>
[ 4.204020] BTRFS info (device dm-0): using crc32c checksum algorithm
[ 4.207017] BTRFS info (device dm-0): enabling ssd optimizations
[ 4.207023] BTRFS info (device dm-0): enabling free space tree
[ 4.322480] systemd-journald[184]: Received SIGTERM from PID 1 (systemd).
[ 5.040088] systemd[1]: systemd 261.3-1-arch running in system mode (+PAM +AUDIT -SELINUX +APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP +LIBARCHIVE)
[ 5.040119] systemd[1]: Detected architecture x86-64.
[ 5.052244] systemd[1]: Hostname set to <HOSTNAME_REDACTED>.
[ 5.123461] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 5.163759] zram: Added device: zram0
[ 5.274016] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[ 5.274155] systemd[1]: Stopped Switch Root.
[ 5.274846] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 5.275265] systemd[1]: Created slice Slice /system/dirmngr.
[ 5.275517] systemd[1]: Created slice Slice /system/getty.
[ 5.275758] systemd[1]: Created slice Slice /system/gpg-agent.
[ 5.275990] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 5.276210] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 5.276470] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 5.276701] systemd[1]: Created slice Slice /system/keyboxd.
[ 5.276925] systemd[1]: Created slice Slice /system/modprobe.
[ 5.277148] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 5.277367] systemd[1]: Created slice Slice /system/systemd-zram-setup.
[ 5.277568] systemd[1]: Created slice User and Session Slice.
[ 5.277591] systemd[1]: Dispatch Password Requests to Console Directory Watch skipped, unmet condition check ConditionPathExists=!/run/plymouth/pid
[ 5.277624] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.277742] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.277759] systemd[1]: Expecting device /dev/disk/by-uuid/BF4F-143B...
[ 5.277770] systemd[1]: Expecting device /dev/zram0...
[ 5.277784] systemd[1]: Reached target Block Device Preparation for /dev/mapper/luks-<LUKS_UUID_REDACTED>.
[ 5.277800] systemd[1]: Reached target Login Prompts.
[ 5.277812] systemd[1]: Reached target Image Downloads.
[ 5.277828] systemd[1]: Stopped target Switch Root.
[ 5.277842] systemd[1]: Stopped target Initrd File Systems.
[ 5.277852] systemd[1]: Stopped target Initrd Root File System.
[ 5.277866] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 5.277917] systemd[1]: Reached target Remote File Systems.
[ 5.277928] systemd[1]: Reached target Slice Units.
[ 5.277949] systemd[1]: Reached target Local Verity Protected Volumes.
[ 5.278001] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.278059] systemd[1]: Listening on LVM2 poll daemon socket.
[ 5.278520] systemd[1]: Listening on Query the User Interactively for a Password.
[ 5.279098] systemd[1]: Listening on Process Core Dump Socket.
[ 5.279381] systemd[1]: Listening on Credential Encryption/Decryption.
[ 5.279763] systemd[1]: Listening on Factory Reset Management.
[ 5.279804] systemd[1]: Listening on Hostname Service Socket.
[ 5.280210] systemd[1]: Listening on Console Output Muting Service Socket.
[ 5.280276] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
[ 5.280316] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os
[ 5.280326] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
[ 5.280626] systemd[1]: Listening on Disk Repartitioning Service Socket.
[ 5.280678] systemd[1]: Listening on Resolve Monitor Varlink Socket.
[ 5.280715] systemd[1]: Listening on Resolve Service Varlink Socket.
[ 5.281104] systemd[1]: Listening on Simple Block Device Backed Storage Provider.
[ 5.281518] systemd[1]: Listening on Simple File System Backed Storage Provider.
[ 5.281571] systemd[1]: Listening on udev Control Socket.
[ 5.281613] systemd[1]: Listening on udev Varlink Socket.
[ 5.281655] systemd[1]: Listening on User Database Manager Socket.
[ 5.282661] systemd[1]: Mounting Huge Pages File System...
[ 5.283493] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.284266] systemd[1]: Mounting Kernel Debug File System...
[ 5.285037] systemd[1]: Mounting Kernel Trace File System...
[ 5.295687] systemd[1]: Starting Create List of Static Device Nodes...
[ 5.296582] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 5.296634] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs
[ 5.297173] systemd[1]: Mounting Kernel Configuration File System...
[ 5.297206] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
[ 5.297227] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
[ 5.297690] systemd[1]: Mounting FUSE Control File System...
[ 5.297724] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
[ 5.297742] systemd[1]: Stopped Plymouth switch root service.
[ 5.297818] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-<HIBERNATE_GUID_REDACTED>
[ 5.299146] systemd[1]: Starting Journal Service...
[ 5.300011] systemd[1]: Starting Load Kernel Modules...
[ 5.300047] systemd[1]: TPM PCR Machine ID Measurement skipped, unmet condition check ConditionSecurity=measured-os
[ 5.300072] systemd[1]: TPM PCR OS Separator skipped, unmet condition check ConditionSecurity=measured-os
[ 5.300694] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.300754] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
[ 5.300769] systemd[1]: TPM PCR NvPCR Initialization Separator skipped, unmet condition check ConditionPathExists=/etc/initrd-release
[ 5.300780] systemd[1]: Reached target Local Encrypted Volumes.
[ 5.300799] systemd[1]: TPM NvPCR Product ID Measurement skipped, unmet condition check ConditionSecurity=measured-os
[ 5.301264] systemd[1]: Starting Load udev Rules from Credentials...
[ 5.301902] systemd[1]: Starting Coldplug All udev Devices...
[ 5.303837] systemd[1]: Mounted Huge Pages File System.
[ 5.303935] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.304010] systemd[1]: Mounted Kernel Debug File System.
[ 5.304077] systemd[1]: Mounted Kernel Trace File System.
[ 5.304305] systemd[1]: Finished Create List of Static Device Nodes.
[ 5.304404] systemd[1]: Mounted Kernel Configuration File System.
[ 5.304530] systemd[1]: Mounted FUSE Control File System.
[ 5.305262] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ 5.306551] BTRFS info (device dm-0 state M): use zstd compression, level 1
[ 5.307519] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 5.307897] systemd[1]: Finished Load udev Rules from Credentials.
[ 5.308071] systemd[1]: Rebuild Hardware Database skipped, unmet condition check ConditionNeedsUpdate=/etc
[ 5.308777] systemd[1]: Starting Load/Save OS Random Seed...
[ 5.308804] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os
[ 5.309597] Asymmetric key parser 'pkcs8' registered
[ 5.310140] i2c_dev: i2c /dev entries driver
[ 5.310145] systemd-journald[420]: Collecting audit messages is disabled.
[ 5.310765] systemd[1]: Finished Load Kernel Modules.
[ 5.311632] systemd[1]: Starting Apply Kernel Variables...
[ 5.314815] systemd[1]: Starting User Database Manager...
[ 5.314874] systemd[1]: Started Journal Service.
[ 5.440380] zram0: detected capacity change from 0 to 31080448
[ 5.501209] Adding 15540220k swap on /dev/zram0. Priority:100 extents:1 across:15540220k SSDsc
[ 5.547532] ryzen_smu: module verification failed: signature and/or required key missing - tainting kernel
[ 5.559493] ryzen_smu: loading version: 0.1.7
[ 5.559497] ryzen_smu: CPUID: family 0x19, model 0x74, stepping 0x1, package 0x4
[ 5.559500] ryzen_smu: Family Codename: Phoenix
[ 5.559720] ryzen_smu: SMU v76.65.0
[ 5.597923] Serial bus multi instantiate pseudo device driver CSC3551:00: Instantiated 2 I2C devices.
[ 5.610989] ACPI: bus type thunderbolt registered
[ 5.613006] pcie_mp2_amd 0000:69:00.7: enabling device (0000 -> 0002)
[ 5.613079] thunderbolt 0000:6b:00.6: IOMMU DMA protection is enabled
[ 5.613094] thunderbolt 0000:6b:00.6: total paths: 3
[ 5.613348] mousedev: PS/2 mouse device common for all mice
[ 5.615040] thunderbolt 0000:6b:00.6: allocating TX ring 0 of size 10
[ 5.615088] thunderbolt 0000:6b:00.6: allocating RX ring 0 of size 10
[ 5.615130] thunderbolt 0000:6b:00.6: control channel created
[ 5.615133] thunderbolt 0000:6b:00.6: using software connection manager
[ 5.625946] mc: Linux media interface: v0.10
[ 5.629713] thunderbolt 0000:6b:00.6: created link from 0000:00:04.1
[ 5.629892] thunderbolt 0000:6b:00.6: NHI initialized, starting thunderbolt
[ 5.629894] thunderbolt 0000:6b:00.6: control channel starting...
[ 5.629896] thunderbolt 0000:6b:00.6: starting TX ring 0
[ 5.629908] thunderbolt 0000:6b:00.6: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[ 5.629917] thunderbolt 0000:6b:00.6: starting RX ring 0
[ 5.629925] thunderbolt 0000:6b:00.6: enabling interrupt at register 0x38200 bit 3 (0x1 -> 0x9)
[ 5.629935] thunderbolt 0000:6b:00.6: security level set to user
[ 5.629979] thunderbolt 0000:6b:00.6: current switch config:
[ 5.629981] thunderbolt 0000:6b:00.6: USB4 Switch: 438:20a (Revision: 0, TB Version: 32)
[ 5.629984] thunderbolt 0000:6b:00.6: Max Port Number: 7
[ 5.629986] thunderbolt 0000:6b:00.6: Config:
[ 5.629987] thunderbolt 0000:6b:00.6: Upstream Port Number: 1 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms
[ 5.629990] thunderbolt 0000:6b:00.6: unknown1: 0x0 unknown4: 0x0
[ 5.630091] thunderbolt 0000:6b:00.6: initializing Switch at 0x0 (depth: 0, up port: 1)
[ 5.630192] thunderbolt 0000:6b:00.6: 0: credit allocation parameters:
[ 5.630195] thunderbolt 0000:6b:00.6: 0: USB3: 24
[ 5.630197] thunderbolt 0000:6b:00.6: 0: DP AUX: 1
[ 5.630198] thunderbolt 0000:6b:00.6: 0: PCIe: 32
[ 5.630200] thunderbolt 0000:6b:00.6: 0: DMA: 32
[ 5.630347] thunderbolt 0000:6b:00.6: 0: uid: 0xa391189004381f66
[ 5.630447] thunderbolt 0000:6b:00.6: Port 1: 0:0 (Revision: 0, TB Version: 1, Type: NHI (0x2))
[ 5.630450] thunderbolt 0000:6b:00.6: Max hop id (in/out): 2/2
[ 5.630452] thunderbolt 0000:6b:00.6: Max counters: 3
[ 5.630454] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 5.630455] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 5.630543] thunderbolt 0000:6b:00.6: Port 2: 0:0 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 5.630545] thunderbolt 0000:6b:00.6: Max hop id (in/out): 16/16
[ 5.630546] thunderbolt 0000:6b:00.6: Max counters: 10
[ 5.630547] thunderbolt 0000:6b:00.6: NFC Credits: 0x88000000
[ 5.630548] thunderbolt 0000:6b:00.6: Credits (total/control): 128/2
[ 5.630614] thunderbolt 0000:6b:00.6: Port 3: 0:0 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 5.630616] thunderbolt 0000:6b:00.6: Max hop id (in/out): 16/16
[ 5.630617] thunderbolt 0000:6b:00.6: Max counters: 10
[ 5.630618] thunderbolt 0000:6b:00.6: NFC Credits: 0x88000000
[ 5.630619] thunderbolt 0000:6b:00.6: Credits (total/control): 128/2
[ 5.630659] thunderbolt 0000:6b:00.6: Port 4: 0:0 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[ 5.630678] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 5.630681] thunderbolt 0000:6b:00.6: Max counters: 1
[ 5.630682] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 5.630684] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 5.630702] thunderbolt 0000:6b:00.6: Port 5: 0:0 (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 5.630704] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 5.630706] thunderbolt 0000:6b:00.6: Max counters: 1
[ 5.630707] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 5.630708] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 5.630725] thunderbolt 0000:6b:00.6: Port 6: 0:0 (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[ 5.630727] thunderbolt 0000:6b:00.6: Max hop id (in/out): 9/8
[ 5.630728] thunderbolt 0000:6b:00.6: Max counters: 2
[ 5.630729] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 5.630730] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 5.630750] thunderbolt 0000:6b:00.6: Port 7: 0:0 (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[ 5.630751] thunderbolt 0000:6b:00.6: Max hop id (in/out): 9/8
[ 5.630753] thunderbolt 0000:6b:00.6: Max counters: 2
[ 5.630753] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 5.630754] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 5.630756] thunderbolt 0000:6b:00.6: 0: running quirk_clx_disable [thunderbolt]
[ 5.630803] thunderbolt 0000:6b:00.6: 0: disabling CL states
[ 5.630804] thunderbolt 0000:6b:00.6: 0: linked ports 2 <-> 3
[ 5.630951] thunderbolt 0000:6b:00.6: 0: TMU: supports uni-directional mode
[ 5.630961] thunderbolt 0000:6b:00.6: 0: TMU: current mode: bi-directional, HiFi
[ 5.631317] thunderbolt 0000:6b:00.6: 0: TMU: mode change bi-directional, HiFi -> uni-directional, LowRes requested
[ 5.631390] thunderbolt 0000:6b:00.6: 0: TMU: mode set to: uni-directional, LowRes
[ 5.631414] thunderbolt 0000:6b:00.6: 0: resetting
[ 5.636026] input: PC Speaker as /devices/platform/pcspkr/input/input21
[ 5.641891] thunderbolt 0000:6b:00.6: 0:6: DP IN resource available
[ 5.642063] thunderbolt 0000:6b:00.6: 0:7: DP IN resource available
[ 5.643492] input: ASUE120A:00 04F3:327D Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-ASUE120A:00/0018:04F3:327D.0008/input/input22
[ 5.643569] input: ASUE120A:00 04F3:327D Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-ASUE120A:00/0018:04F3:327D.0008/input/input23
[ 5.643689] hid-generic 0018:04F3:327D.0008: input,hidraw7: I2C HID v1.00 Mouse [ASUE120A:00 04F3:327D] on i2c-ASUE120A:00
[ 5.654578] Bluetooth: Core ver 2.22
[ 5.654595] NET: Registered PF_BLUETOOTH protocol family
[ 5.654596] Bluetooth: HCI device and connection manager initialized
[ 5.654602] Bluetooth: HCI socket layer initialized
[ 5.654604] Bluetooth: L2CAP socket layer initialized
[ 5.654606] Bluetooth: SCO socket layer initialized
[ 5.657235] i2c_hid_acpi i2c-ELAN9008:00: i2c_hid_get_input: IRQ triggered but there's no data
[ 5.657761] input: ELAN9008:00 04F3:40FD Touchscreen as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input24
[ 5.657859] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input25
[ 5.657904] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input26
[ 5.657953] input: ELAN9008:00 04F3:40FD Stylus as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input27
[ 5.658036] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input29
[ 5.658097] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input30
[ 5.658137] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input31
[ 5.668282] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 5.668285] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.668287] RAPL PMU: hw unit of domain core 2^-16 Joules
[ 5.692123] hid-generic 0018:04F3:40FD.0009: input,hidraw8: I2C HID v1.00 Device [ELAN9008:00 04F3:40FD] on i2c-ELAN9008:00
[ 5.700188] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.700195] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 5.704628] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 5.707219] videodev: Linux video capture interface: v2.00
[ 5.707222] i2c i2c-8: Successfully instantiated SPD at 0x50
[ 5.751254] asus_wmi: Initialization: 0x1
[ 5.751327] asus_wmi: BIOS WMI version: 9.0
[ 5.751369] asus_wmi: SFUN value: 0x21
[ 5.751372] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 5.751975] amdxdna 0000:6a:00.1: [drm] Load firmware amdnpu/1502_00/npu_7.sbin
[ 5.752003] amdxdna 0000:6a:00.1: enabling device (0000 -> 0002)
[ 5.753748] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Adding DSD properties for 10431533
[ 5.753751] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Cannot add Reset/Speaker ID/SPI CS GPIO Mapping, _DSD already exists.
[ 5.755145] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Using extra _DSD properties, bypassing _DSD in ACPI
[ 5.760751] usbcore: registered new interface driver btusb
[ 5.763247] kvm_amd: TSC scaling supported
[ 5.763251] kvm_amd: Nested Virtualization enabled
[ 5.763253] kvm_amd: Nested Paging enabled
[ 5.763256] kvm_amd: LBR virtualization supported
[ 5.763260] kvm_amd: [Firmware Bug]: Cannot enable x2AVIC, AVIC is unsupported
[ 5.763261] kvm_amd: Virtual GIF supported
[ 5.763262] kvm_amd: Virtual NMI enabled
[ 5.771330] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 5.771987] asus-nb-wmi asus-nb-wmi: Using throttle_thermal_policy for platform_profile support
[ 5.785796] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input33
[ 5.796907] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.797010] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.797097] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 5.797516] uvcvideo 3-1:1.0: Found UVC 1.00 device USB2.0 FHD UVC WebCam (3277:0018)
[ 5.800127] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 5.800243] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 5.800251] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 5.800590] snd_hda_intel 0000:69:00.1: enabling device (0000 -> 0002)
[ 5.800644] snd_hda_intel 0000:69:00.1: Handle vga_switcheroo audio client
[ 5.814176] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input34
[ 5.819532] uvcvideo 3-1:1.2: Found UVC 1.00 device USB2.0 FHD UVC WebCam (3277:0018)
[ 5.820221] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Cirrus Logic CS35L41 (35a40), Revision: B2
[ 5.820465] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Adding DSD properties for 10431533
[ 5.820471] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Cannot add Reset/Speaker ID/SPI CS GPIO Mapping, _DSD already exists.
[ 5.820659] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Using extra _DSD properties, bypassing _DSD in ACPI
[ 5.820662] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Reset line busy, assuming shared reset
[ 5.827392] usbcore: registered new interface driver uvcvideo
[ 5.835303] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:69:00.1/sound/card1/input38
[ 5.871649] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input35
[ 5.871776] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:69:00.1/sound/card1/input39
[ 5.871838] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input36
[ 5.872191] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input37
[ 5.879120] asus_wmi: fan_curve_get_factory_default (0x00110032) failed: -19
[ 5.881518] input: ASUE120A:00 04F3:327D Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-ASUE120A:00/0018:04F3:327D.0008/input/input40
[ 5.881616] input: ASUE120A:00 04F3:327D Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-ASUE120A:00/0018:04F3:327D.0008/input/input41
[ 5.881704] hid-multitouch 0018:04F3:327D.0008: input,hidraw7: I2C HID v1.00 Mouse [ASUE120A:00 04F3:327D] on i2c-ASUE120A:00
[ 5.884782] [drm] Initialized amdxdna_accel_driver 0.10.0 for 0000:6a:00.1 on minor 0
[ 5.891516] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Cirrus Logic CS35L41 (35a40), Revision: B2
[ 6.471018] systemd-journald[420]: Received client request to flush runtime journal.
[ 6.853944] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input42
[ 6.854105] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input43
[ 6.854211] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input44
[ 6.854352] input: ELAN9008:00 04F3:40FD Stylus as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input45
[ 6.854505] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input47
[ 6.854594] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input48
[ 6.854666] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0009/input/input49
[ 6.889040] hid-multitouch 0018:04F3:40FD.0009: input,hidraw8: I2C HID v1.00 Device [ELAN9008:00 04F3:40FD] on i2c-ELAN9008:00
[ 6.904686] ACPI: battery: new hook: ASUS Battery Extension
[ 7.442352] snd_hda_codec_alc269 hdaudioC2D0: ALC294: picked fixup for PCI SSID 1043:1533
[ 7.444715] intel_rapl_common: Found RAPL domain package
[ 7.444718] intel_rapl_common: Found RAPL domain core
[ 7.445386] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw: format 3 timestamp 0x6128e16b
[ 7.445390] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
[ 7.446614] amdgpu: vga_switcheroo: detected switching method \_SB_.PCI0.GP17.VGA_.ATPX handle
[ 7.446828] amdgpu: ATPX version 1, functions 0x00000801
[ 7.446945] amdgpu: ATPX Hybrid Graphics
[ 7.447751] ath12k_wifi7_pci 0000:06:00.0: BAR 0 [mem 0xdda00000-0xddbfffff 64bit]: assigned
[ 7.447780] ath12k_wifi7_pci 0000:06:00.0: enabling device (0000 -> 0002)
[ 7.447827] ath12k_wifi7_pci 0000:06:00.0: Wi-Fi 7 Hardware name: wcn7850 hw2.0
[ 7.448216] ath12k_wifi7_pci 0000:06:00.0: MSI vectors: 16
[ 7.448673] amd_atl: AMD Address Translation Library initialized
[ 7.455129] NET: Registered PF_QIPCRTR protocol family
[ 7.458337] snd_pci_ps 0000:69:00.5: enabling device (0000 -> 0002)
[ 7.458884] acpi device:2e: Failed to read mipi-sdw-manager-list: -22
[ 7.459045] amdgpu: Virtual CRAT table created for CPU
[ 7.459068] amdgpu: Topology: Add CPU node
[ 7.459225] amdgpu 0000:69:00.0: enabling device (0006 -> 0007)
[ 7.459288] amdgpu 0000:69:00.0: initializing kernel modesetting (IP DISCOVERY 0x1002:0x15BF 0x1043:0x1533 0xC6).
[ 7.459513] amdgpu 0000:69:00.0: register mmio base: 0xDD800000
[ 7.459515] amdgpu 0000:69:00.0: register mmio size: 524288
[ 7.463890] amdgpu 0000:69:00.0: detected ip block number 0 <common_v1_0_0> (soc21_common)
[ 7.463896] amdgpu 0000:69:00.0: detected ip block number 1 <gmc_v11_0_0> (gmc_v11_0)
[ 7.463901] amdgpu 0000:69:00.0: detected ip block number 2 <ih_v6_0_0> (ih_v6_0)
[ 7.463904] amdgpu 0000:69:00.0: detected ip block number 3 <psp_v13_0_4> (psp)
[ 7.463908] amdgpu 0000:69:00.0: detected ip block number 4 <smu_v13_0_0> (smu)
[ 7.463911] amdgpu 0000:69:00.0: detected ip block number 5 <dce_v1_0_0> (dm)
[ 7.463915] amdgpu 0000:69:00.0: detected ip block number 6 <gfx_v11_0_0> (gfx_v11_0)
[ 7.463919] amdgpu 0000:69:00.0: detected ip block number 7 <sdma_v6_0_0> (sdma_v6_0)
[ 7.463922] amdgpu 0000:69:00.0: detected ip block number 8 <vcn_v4_0_0> (vcn_v4_0)
[ 7.463925] amdgpu 0000:69:00.0: detected ip block number 9 <jpeg_v4_0_0> (jpeg_v4_0)
[ 7.463927] amdgpu 0000:69:00.0: detected ip block number 10 <mes_v11_0_0> (mes_v11_0)
[ 7.463966] amdgpu 0000:69:00.0: Fetched VBIOS from VFCT
[ 7.463972] amdgpu 0000:69:00.0: [drm] ATOM BIOS: 113-PHXGENERIC-001, build: 00069830, ver: 022.012.000.024.000001, 2023/07/06
[ 7.492626] amdgpu 0000:69:00.0: vgaarb: deactivate vga console
[ 7.492635] amdgpu 0000:69:00.0: Trusted Memory Zone (TMZ) feature enabled
[ 7.492707] amdgpu 0000:69:00.0: vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 7.492740] amdgpu 0000:69:00.0: VRAM: 512M 0x0000008000000000 - 0x000000801FFFFFFF (512M used)
[ 7.492745] amdgpu 0000:69:00.0: GART: 512M 0x00007FFF00000000 - 0x00007FFF1FFFFFFF
[ 7.492772] amdgpu 0000:69:00.0: [drm] Detected VRAM RAM=512M, BAR=512M
[ 7.492775] amdgpu 0000:69:00.0: [drm] RAM width 128bits LPDDR5
[ 7.492909] amdgpu 0000:69:00.0: 512M of VRAM memory ready
[ 7.492913] amdgpu 0000:69:00.0: 7588M of GTT memory ready.
[ 7.492937] amdgpu 0000:69:00.0: [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.493412] amdgpu 0000:69:00.0: [drm] PCIE GART of 512M enabled (table at 0x000000801FD00000).
[ 7.493844] amdgpu 0000:69:00.0: [drm] Loading DMUB firmware via PSP: version=0x08006200
[ 7.494238] amdgpu 0000:69:00.0: [VCN instance 0] Found VCN firmware Version ENC: 1.24 DEC: 9 VEP: 0 Revision: 34
[ 7.494324] amdgpu 0000:69:00.0: MES: vmid_mask_mmhub 0x0000ff00, vmid_mask_gfxhub 0x0000ff00
[ 7.494326] amdgpu 0000:69:00.0: MES: gfx_hqd_mask 0x00000002, compute_hqd_mask 0x0000000c, sdma_hqd_mask 0x000000fc
[ 7.511108] mhi mhi0: Requested to power ON
[ 7.511132] mhi mhi0: Power on setup success
[ 7.519523] amdgpu 0000:69:00.0: reserve 0x4a00000 from 0x8010000000 for PSP TMR
[ 7.600533] mhi mhi0: Wait for device to enter SBL or Mission mode
[ 7.742350] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.742356] Bluetooth: BNEP filters: protocol multicast
[ 7.742366] Bluetooth: BNEP socket layer initialized
[ 7.744612] Bluetooth: MGMT ver 1.23
[ 7.750831] NET: Registered PF_ALG protocol family
[ 7.994839] ath12k_wifi7_pci 0000:06:00.0: chip_id 0x2 chip_family 0x4 board_id 0xff soc_id 0x40170200
[ 7.994846] ath12k_wifi7_pci 0000:06:00.0: fw_version 0x1103006c fw_build_timestamp 2026-03-06 09:10 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
[ 8.099635] amdgpu 0000:69:00.0: RAS: optional ras ta ucode is not available
[ 8.108199] amdgpu 0000:69:00.0: RAP: optional rap ta ucode is not available
[ 8.108207] amdgpu 0000:69:00.0: SECUREDISPLAY: optional securedisplay ta ucode is not available
[ 8.108654] amdgpu 0000:69:00.0: smu driver if version = 0x00000008, smu fw if version = 0x00000008, smu fw program = 0, smu fw version = 0x004c4100 (76.65.0)
[ 8.138909] amdgpu 0000:69:00.0: SMU is initialized successfully!
[ 8.140275] amdgpu 0000:69:00.0: [drm] Display Core v3.2.384 initialized on DCN 3.1.4
[ 8.140278] amdgpu 0000:69:00.0: [drm] DP-HDMI FRL PCON supported
[ 8.141966] thunderbolt 0000:6b:00.6: acking hot unplug event on 0:6
[ 8.141986] thunderbolt 0000:6b:00.6: 0:6: DP IN resource unavailable: adapter unplug
[ 8.141992] thunderbolt 0000:6b:00.6: bandwidth consumption changed, re-calculating estimated bandwidth
[ 8.141995] thunderbolt 0000:6b:00.6: bandwidth re-calculation done
[ 8.141997] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 8.141997] thunderbolt 0000:6b:00.6: acking hot unplug event on 0:7
[ 8.142017] thunderbolt 0000:6b:00.6: 0:7: DP IN available
[ 8.142019] thunderbolt 0000:6b:00.6: 0:7: no suitable DP OUT adapter available, not tunneling
[ 8.142033] thunderbolt 0000:6b:00.6: 0:7: DP IN resource unavailable: adapter unplug
[ 8.142035] thunderbolt 0000:6b:00.6: bandwidth consumption changed, re-calculating estimated bandwidth
[ 8.142036] thunderbolt 0000:6b:00.6: bandwidth re-calculation done
[ 8.142037] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 8.142038] thunderbolt 0000:6b:00.6: no suitable DP IN adapter available, not tunneling
[ 8.142696] amdgpu 0000:69:00.0: [drm] DMUB hardware initialized: version=0x08006200
[ 8.144281] workqueue: name exceeds WQ_NAME_LEN. Truncating to: hdmi_frl_status_polling_workque
[ 8.424185] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
[ 8.426434] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533-spkid1-l0.bin (v1): v0.43.1
[ 8.426440] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: C:\Users\dchunyi\Documents\Asus_ROG\Project\GV302\Tuning\20220916\10431533_220916_V1_A0.bin
[ 8.568727] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Calibration applied: R0=10386
[ 8.590013] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Firmware Loaded - Type: spk-prot, Gain: 17
[ 8.590099] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: CS35L41 Bound - SSID: 10431533, BST: 0, VSPK: 0, CH: L, FW EN: 1, SPKID: 1
[ 8.590105] snd_hda_codec_alc269 hdaudioC2D0: bound i2c-CSC3551:00-cs35l41-hda.0 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[ 8.591484] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw: format 3 timestamp 0x6128e16b
[ 8.591492] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
[ 9.569834] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
[ 9.572042] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533-spkid1-r0.bin (v1): v0.43.1
[ 9.572045] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: C:\Users\dchunyi\Documents\Asus_ROG\Project\GV302\Tuning\20220916\10431533_220916_V1_A1.bin
[ 9.714356] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Calibration applied: R0=10318
[ 9.736020] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Firmware Loaded - Type: spk-prot, Gain: 17
[ 9.736105] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: CS35L41 Bound - SSID: 10431533, BST: 0, VSPK: 0, CH: R, FW EN: 1, SPKID: 1
[ 9.736112] snd_hda_codec_alc269 hdaudioC2D0: bound i2c-CSC3551:00-cs35l41-hda.1 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[ 9.736542] snd_hda_codec_alc269 hdaudioC2D0: autoconfig for ALC294: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 9.736547] snd_hda_codec_alc269 hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.736550] snd_hda_codec_alc269 hdaudioC2D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.736553] snd_hda_codec_alc269 hdaudioC2D0: mono: mono_out=0x0
[ 9.736555] snd_hda_codec_alc269 hdaudioC2D0: inputs:
[ 9.736557] snd_hda_codec_alc269 hdaudioC2D0: Internal Mic=0x12
[ 9.736560] snd_hda_codec_alc269 hdaudioC2D0: Internal Mic=0x13
[ 9.736169] snd_hda_intel 0000:69:00.1: bound 0000:69:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 9.820201] amdgpu 0000:69:00.0: [drm] eDP-2: PSR support 0, DC PSR ver 0, sink PSR ver 4 DPCD caps 0x3a su_y_granularity 4
[ 9.820403] amdgpu 0000:69:00.0: [drm] HDMI-A-2: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 9.820550] amdgpu 0000:69:00.0: [drm] DP-1: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 9.820688] amdgpu 0000:69:00.0: [drm] DP-2: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 9.820816] amdgpu 0000:69:00.0: [drm] DP-3: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 9.820946] amdgpu 0000:69:00.0: [drm] DP-4: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 9.821079] amdgpu 0000:69:00.0: [drm] DP-5: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 9.821250] amdgpu 0000:69:00.0: [drm] DP-6: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 9.821400] amdgpu 0000:69:00.0: [drm] DP-7: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 9.829659] kfd kfd: Allocated 3969056 bytes on gart
[ 9.829697] kfd kfd: Total number of KFD nodes to be created: 1
[ 9.829872] amdgpu: Virtual CRAT table created for GPU
[ 9.830843] amdgpu: Topology: Add GPU node [0x1002:0x15bf]
[ 9.830845] kfd kfd: added device 1002:15bf
[ 9.830867] amdgpu 0000:69:00.0: SE 1, SH per SE 2, CU per SH 6, active_cu_number 12
[ 9.830873] amdgpu 0000:69:00.0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 9.830875] amdgpu 0000:69:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 9.830876] amdgpu 0000:69:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 9.830878] amdgpu 0000:69:00.0: ring comp_1.2.0 uses VM inv eng 6 on hub 0
[ 9.830879] amdgpu 0000:69:00.0: ring comp_1.3.0 uses VM inv eng 7 on hub 0
[ 9.830880] amdgpu 0000:69:00.0: ring comp_1.0.1 uses VM inv eng 8 on hub 0
[ 9.830881] amdgpu 0000:69:00.0: ring comp_1.1.1 uses VM inv eng 9 on hub 0
[ 9.830882] amdgpu 0000:69:00.0: ring comp_1.2.1 uses VM inv eng 10 on hub 0
[ 9.830883] amdgpu 0000:69:00.0: ring comp_1.3.1 uses VM inv eng 11 on hub 0
[ 9.830884] amdgpu 0000:69:00.0: ring sdma0 uses VM inv eng 12 on hub 0
[ 9.830886] amdgpu 0000:69:00.0: ring vcn_unified_0 uses VM inv eng 0 on hub 8
[ 9.830887] amdgpu 0000:69:00.0: ring jpeg_dec uses VM inv eng 1 on hub 8
[ 9.830888] amdgpu 0000:69:00.0: ring mes_kiq_3.1.0 uses VM inv eng 13 on hub 0
[ 9.832330] amdgpu 0000:69:00.0: Runtime PM not available
[ 9.832612] amdgpu 0000:69:00.0: [drm] Skipping amdgpu DM backlight registration
[ 9.833805] amdgpu 0000:69:00.0: [drm] Registered 4 planes with drm panic
[ 9.833808] [drm] Initialized amdgpu 3.64.0 for 0000:69:00.0 on minor 2
[ 9.840460] fbcon: amdgpudrmfb (fb0) is primary device
[ 9.840464] fbcon: Deferring console take-over
[ 9.840469] amdgpu 0000:69:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 10.192048] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:69:00.6/sound/card2/input51
[ 10.774518] hid-generic 0020:1022:0001.000A: hidraw9: SENSOR HUB HID v0.00 Device [hid-amdsfh 1022:0001] on pcie_mp2_amd
[ 10.778775] hid-sensor-hub 0020:1022:0001.000A: hidraw9: SENSOR HUB HID v0.00 Device [hid-amdsfh 1022:0001] on pcie_mp2_amd
[ 10.802492] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 10.865406] [drm] pre_validate_dsc:1746 MST_DSC dsc precompute is not needed
[ 10.882151] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 10.882237] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 10.882463] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 10.882477] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 11.142885] thunderbolt 0000:6b:00.6: acking hot plug event on 0:6
[ 11.142902] thunderbolt 0000:6b:00.6: acking hot plug event on 0:7
[ 11.142929] thunderbolt 0000:6b:00.6: 0:6: DP IN resource available after hotplug
[ 11.142936] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 11.142959] thunderbolt 0000:6b:00.6: 0:6: DP IN available
[ 11.142962] thunderbolt 0000:6b:00.6: 0:6: no suitable DP OUT adapter available, not tunneling
[ 11.143013] thunderbolt 0000:6b:00.6: 0:7: DP IN resource available after hotplug
[ 11.143016] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 11.143038] thunderbolt 0000:6b:00.6: 0:6: DP IN available
[ 11.143040] thunderbolt 0000:6b:00.6: 0:6: no suitable DP OUT adapter available, not tunneling
[ 11.143083] thunderbolt 0000:6b:00.6: 0:7: DP IN available
[ 11.143086] thunderbolt 0000:6b:00.6: 0:7: no suitable DP OUT adapter available, not tunneling
[ 11.204668] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 11.880143] Bluetooth: RFCOMM TTY layer initialized
[ 11.880152] Bluetooth: RFCOMM socket layer initialized
[ 11.880156] Bluetooth: RFCOMM ver 1.11
[ 14.753016] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 27.277758] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 27.277774] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 27.697704] block nvme0n1: No UUID available providing old NGUID
[ 28.625654] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 29.626384] thunderbolt 0000:6b:00.6: 0: suspending switch
[ 29.626396] thunderbolt 0000:6b:00.6: 0: enabling wakeup: 0x3f
[ 29.626621] thunderbolt 0000:6b:00.6: stopping RX ring 0
[ 29.626631] thunderbolt 0000:6b:00.6: disabling interrupt at register 0x38200 bit 3 (0x9 -> 0x1)
[ 29.626652] thunderbolt 0000:6b:00.6: stopping TX ring 0
[ 29.626659] thunderbolt 0000:6b:00.6: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[ 29.626671] thunderbolt 0000:6b:00.6: control channel stopped
[ 239.840092] ntfs3: Enabled Linux POSIX ACLs support
[ 239.840098] ntfs3: Read-only LZX/Xpress compression included
[ 499.719777] wlan0: authenticate with <AP_BSSID_REDACTED> (local address=<WIFI_MAC_REDACTED>)
[ 499.719786] wlan0: send auth to <AP_BSSID_REDACTED> (try 1/3)
[ 499.731585] wlan0: authenticate with <AP_BSSID_REDACTED> (local address=<WIFI_MAC_REDACTED>)
[ 499.731591] wlan0: send auth to <AP_BSSID_REDACTED> (try 1/3)
[ 499.737728] wlan0: send auth to <AP_BSSID_REDACTED> (try 2/3)
[ 499.741366] wlan0: <AP_BSSID_REDACTED> denied authentication (status 15)
[ 526.012864] wlan0: authenticate with <AP_BSSID_REDACTED> (local address=<WIFI_MAC_REDACTED>)
[ 526.012871] wlan0: send auth to <AP_BSSID_REDACTED> (try 1/3)
[ 526.024431] wlan0: authenticate with <AP_BSSID_REDACTED> (local address=<WIFI_MAC_REDACTED>)
[ 526.024436] wlan0: send auth to <AP_BSSID_REDACTED> (try 1/3)
[ 526.031976] wlan0: authenticated
[ 526.032491] wlan0: associate with <AP_BSSID_REDACTED> (try 1/3)
[ 526.046134] wlan0: RX AssocResp from <AP_BSSID_REDACTED> (capab=0x1431 status=0 aid=2)
[ 526.067700] wlan0: associated
[ 526.211923] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by <AP_BSSID_REDACTED>
[ 528.046460] [UFW BLOCK] IN=wlan0 OUT= MAC= SRC=<LINK_LOCAL_IPV6_REDACTED> DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=69 TC=0 HOPLIMIT=255 FLOWLBL=342332 PROTO=UDP SPT=5355 DPT=5355 LEN=29
[ 528.146646] [UFW BLOCK] IN=wlan0 OUT= MAC= SRC=<LINK_LOCAL_IPV6_REDACTED> DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=69 TC=0 HOPLIMIT=255 FLOWLBL=342332 PROTO=UDP SPT=5355 DPT=5355 LEN=29
[ 528.376716] [UFW BLOCK] IN=wlan0 OUT= MAC= SRC=<LINK_LOCAL_IPV6_REDACTED> DST=ff02:0000:0000:0000:0000:0000:0001:0003 LEN=69 TC=0 HOPLIMIT=255 FLOWLBL=342332 PROTO=UDP SPT=5355 DPT=5355 LEN=29
[ 529.353896] [UFW BLOCK] IN=wlan0 OUT= MAC= SRC=<LAN_IPV4_REDACTED> DST=224.0.0.252 LEN=49 TOS=0x00 PREC=0x00 TTL=255 ID=20075 PROTO=UDP SPT=5355 DPT=5355 LEN=29
[ 529.497848] [UFW BLOCK] IN=wlan0 OUT= MAC= SRC=<LAN_IPV4_REDACTED> DST=224.0.0.252 LEN=49 TOS=0x00 PREC=0x00 TTL=255 ID=20164 PROTO=UDP SPT=5355 DPT=5355 LEN=29
[ 529.797473] [UFW BLOCK] IN=wlan0 OUT= MAC= SRC=<LAN_IPV4_REDACTED> DST=224.0.0.252 LEN=49 TOS=0x00 PREC=0x00 TTL=255 ID=20210 PROTO=UDP SPT=5355 DPT=5355 LEN=29
[ 790.463129] thunderbolt 0000:6b:00.6: control channel starting...
[ 790.463135] thunderbolt 0000:6b:00.6: starting TX ring 0
[ 790.463141] thunderbolt 0000:6b:00.6: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[ 790.463144] thunderbolt 0000:6b:00.6: starting RX ring 0
[ 790.463149] thunderbolt 0000:6b:00.6: enabling interrupt at register 0x38200 bit 3 (0x1 -> 0x9)
[ 790.463154] thunderbolt 0000:6b:00.6: 0: resuming switch
[ 790.463156] thunderbolt 0000:6b:00.6: restoring Switch at 0x0 (depth: 0, up port: 1)
[ 790.463208] thunderbolt 0000:6b:00.6: 0: disabling wakeup
[ 790.463428] thunderbolt 0000:6b:00.6: acking hot plug event on 0:6
[ 790.463443] thunderbolt 0000:6b:00.6: acking hot plug event on 0:7
[ 790.463448] thunderbolt 0000:6b:00.6: 0: TMU: supports uni-directional mode
[ 790.463458] thunderbolt 0000:6b:00.6: 0: TMU: current mode: off
[ 790.463462] thunderbolt 0000:6b:00.6: 0: TMU: mode change off -> bi-directional, HiFi requested
[ 790.463492] thunderbolt 0000:6b:00.6: 0: TMU: mode set to: bi-directional, HiFi
[ 790.463527] thunderbolt 0000:6b:00.6: 0:6: DP IN resource available after hotplug
[ 790.463531] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 790.463546] thunderbolt 0000:6b:00.6: 0:6: DP IN available
[ 790.463550] thunderbolt 0000:6b:00.6: 0:6: no suitable DP OUT adapter available, not tunneling
[ 790.463570] thunderbolt 0000:6b:00.6: 0:7: DP IN resource available after hotplug
[ 790.463572] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 790.463584] thunderbolt 0000:6b:00.6: 0:6: DP IN available
[ 790.463586] thunderbolt 0000:6b:00.6: 0:6: no suitable DP OUT adapter available, not tunneling
[ 790.463598] thunderbolt 0000:6b:00.6: 0:7: DP IN available
[ 790.463600] thunderbolt 0000:6b:00.6: 0:7: no suitable DP OUT adapter available, not tunneling
[ 791.075429] thunderbolt 0000:6b:00.6: acking hot plug event on 0:2
[ 791.075448] thunderbolt 0000:6b:00.6: acking hot plug event on 0:3
[ 791.075449] thunderbolt 0000:6b:00.6: 0:2: hotplug: scanning
[ 791.075470] thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state: 2)
[ 791.075523] thunderbolt 0000:6b:00.6: current switch config:
[ 791.075525] thunderbolt 0000:6b:00.6: USB4 Switch: 8087:5786 (Revision: 132, TB Version: 64)
[ 791.075528] thunderbolt 0000:6b:00.6: Max Port Number: 23
[ 791.075530] thunderbolt 0000:6b:00.6: Config:
[ 791.075532] thunderbolt 0000:6b:00.6: Upstream Port Number: 1 Depth: 0 Route String: 0x0 Enabled: 0, PlugEventsDelay: 10ms
[ 791.075534] thunderbolt 0000:6b:00.6: unknown1: 0x0 unknown4: 0x0
[ 791.075849] thunderbolt 0000:6b:00.6: initializing Switch at 0x2 (depth: 1, up port: 1)
[ 791.075889] thunderbolt 0000:6b:00.6: 2: link: TBT
[ 791.075891] thunderbolt 0000:6b:00.6: 2: TBT3 support: yes, xHCI: yes
[ 791.076746] thunderbolt 0000:6b:00.6: 2: credit allocation parameters:
[ 791.076749] thunderbolt 0000:6b:00.6: 2: USB3: 20
[ 791.076752] thunderbolt 0000:6b:00.6: 2: DP AUX: 1
[ 791.076753] thunderbolt 0000:6b:00.6: 2: DP main: 6
[ 791.076755] thunderbolt 0000:6b:00.6: 2: PCIe: 76
[ 791.076757] thunderbolt 0000:6b:00.6: 2: unknown credit allocation index 0x0, skipping
[ 791.077868] thunderbolt 0000:6b:00.6: 2: DROM version: 1
[ 791.078061] thunderbolt 0000:6b:00.6: 2: uid: 0xb1e9510080878dfa
[ 791.078198] thunderbolt 0000:6b:00.6: Port 1: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 791.078202] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 791.078204] thunderbolt 0000:6b:00.6: Max counters: 4
[ 791.078206] thunderbolt 0000:6b:00.6: NFC Credits: 0x4a000000
[ 791.078208] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 791.078328] thunderbolt 0000:6b:00.6: Port 2: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 791.078330] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 791.078332] thunderbolt 0000:6b:00.6: Max counters: 0
[ 791.078333] thunderbolt 0000:6b:00.6: NFC Credits: 0xca000000
[ 791.078334] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 791.078475] thunderbolt 0000:6b:00.6: Port 3: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 791.078477] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 791.078478] thunderbolt 0000:6b:00.6: Max counters: 4
[ 791.078480] thunderbolt 0000:6b:00.6: NFC Credits: 0x8a000000
[ 791.078481] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 791.078605] thunderbolt 0000:6b:00.6: Port 4: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 791.078608] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 791.078609] thunderbolt 0000:6b:00.6: Max counters: 0
[ 791.078610] thunderbolt 0000:6b:00.6: NFC Credits: 0x8a000000
[ 791.078612] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 791.078787] thunderbolt 0000:6b:00.6: Port 5: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 791.078789] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 791.078791] thunderbolt 0000:6b:00.6: Max counters: 4
[ 791.078792] thunderbolt 0000:6b:00.6: NFC Credits: 0x8a000000
[ 791.078793] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 791.079153] thunderbolt 0000:6b:00.6: Port 6: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 791.079157] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 791.079160] thunderbolt 0000:6b:00.6: Max counters: 0
[ 791.079161] thunderbolt 0000:6b:00.6: NFC Credits: 0x8a000000
[ 791.079163] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 791.079339] thunderbolt 0000:6b:00.6: Port 7: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 791.079344] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 791.079347] thunderbolt 0000:6b:00.6: Max counters: 4
[ 791.079348] thunderbolt 0000:6b:00.6: NFC Credits: 0x8a000000
[ 791.079350] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 791.079415] thunderbolt 0000:6b:00.6: acking hot plug event on 2:13
[ 791.079429] thunderbolt 0000:6b:00.6: acking hot plug event on 2:2
[ 791.079441] thunderbolt 0000:6b:00.6: acking hot plug event on 2:14
[ 791.079453] thunderbolt 0000:6b:00.6: acking hot plug event on 2:16
[ 791.079474] thunderbolt 0000:6b:00.6: Port 8: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 791.079476] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 791.079478] thunderbolt 0000:6b:00.6: Max counters: 0
[ 791.079479] thunderbolt 0000:6b:00.6: NFC Credits: 0x8a000000
[ 791.079480] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 791.079511] thunderbolt 0000:6b:00.6: Port 9: 0:5780 (Revision: 0, TB Version: 1, Type: PCIe (0x100102))
[ 791.079514] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 791.079515] thunderbolt 0000:6b:00.6: Max counters: 2
[ 791.079516] thunderbolt 0000:6b:00.6: NFC Credits: 0x40800000
[ 791.079518] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 791.079548] thunderbolt 0000:6b:00.6: Port 10: 0:5780 (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 791.079551] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 791.079552] thunderbolt 0000:6b:00.6: Max counters: 2
[ 791.079553] thunderbolt 0000:6b:00.6: NFC Credits: 0x40800000
[ 791.079554] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 791.079608] thunderbolt 0000:6b:00.6: Port 11: 0:5780 (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0102))
[ 791.079611] thunderbolt 0000:6b:00.6: Max hop id (in/out): 9/9
[ 791.079612] thunderbolt 0000:6b:00.6: Max counters: 2
[ 791.079613] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 791.079615] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 791.079669] thunderbolt 0000:6b:00.6: Port 12: 0:5780 (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0102))
[ 791.079672] thunderbolt 0000:6b:00.6: Max hop id (in/out): 9/9
[ 791.079673] thunderbolt 0000:6b:00.6: Max counters: 2
[ 791.079674] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 791.079675] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 791.079677] thunderbolt 0000:6b:00.6: 2:13: disabled by eeprom
[ 791.079679] thunderbolt 0000:6b:00.6: 2:14: disabled by eeprom
[ 791.079692] thunderbolt 0000:6b:00.6: Port 15: not implemented
[ 791.079694] thunderbolt 0000:6b:00.6: 2:16: disabled by eeprom
[ 791.079725] thunderbolt 0000:6b:00.6: Port 17: 0:5780 (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 791.079727] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 791.079729] thunderbolt 0000:6b:00.6: Max counters: 2
[ 791.079730] thunderbolt 0000:6b:00.6: NFC Credits: 0x40800000
[ 791.079732] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 791.079762] thunderbolt 0000:6b:00.6: Port 18: 0:5780 (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 791.079764] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 791.079766] thunderbolt 0000:6b:00.6: Max counters: 2
[ 791.079767] thunderbolt 0000:6b:00.6: NFC Credits: 0x40800000
[ 791.079768] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 791.079822] thunderbolt 0000:6b:00.6: Port 19: 0:5780 (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0102))
[ 791.079824] thunderbolt 0000:6b:00.6: Max hop id (in/out): 9/9
[ 791.079825] thunderbolt 0000:6b:00.6: Max counters: 2
[ 791.079826] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 791.079828] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 791.079858] thunderbolt 0000:6b:00.6: Port 20: 0:5780 (Revision: 0, TB Version: 1, Type: USB (0x200102))
[ 791.079860] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 791.079861] thunderbolt 0000:6b:00.6: Max counters: 1
[ 791.079863] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 791.079864] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 791.079894] thunderbolt 0000:6b:00.6: Port 21: 0:5780 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[ 791.079897] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 791.079898] thunderbolt 0000:6b:00.6: Max counters: 1
[ 791.079899] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 791.079900] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 791.079931] thunderbolt 0000:6b:00.6: Port 22: 0:5780 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[ 791.079933] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 791.079935] thunderbolt 0000:6b:00.6: Max counters: 1
[ 791.079936] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 791.079937] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 791.079967] thunderbolt 0000:6b:00.6: Port 23: 0:5780 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[ 791.079969] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 791.079971] thunderbolt 0000:6b:00.6: Max counters: 1
[ 791.079972] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 791.079973] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 791.079975] thunderbolt 0000:6b:00.6: 2: running quirk_usb3_maximum_bandwidth [thunderbolt]
[ 791.080007] thunderbolt 0000:6b:00.6: 2:21: USB3 maximum bandwidth limited to 16376 Mb/s
[ 791.080009] thunderbolt 0000:6b:00.6: 2:22: USB3 maximum bandwidth limited to 16376 Mb/s
[ 791.080010] thunderbolt 0000:6b:00.6: 2:23: USB3 maximum bandwidth limited to 16376 Mb/s
[ 791.080041] thunderbolt 0000:6b:00.6: 2: current link speed 20.0 Gb/s
[ 791.080043] thunderbolt 0000:6b:00.6: 2: current link width symmetric, single lane
[ 791.080079] thunderbolt 0000:6b:00.6: 0:2: total credits changed 128 -> 128
[ 791.080091] thunderbolt 0000:6b:00.6: 0:3: total credits changed 128 -> 128
[ 791.080106] thunderbolt 0000:6b:00.6: 2: CLx: current mode: disabled
[ 791.080788] thunderbolt 0000:6b:00.6: 2: TMU: supports uni-directional mode
[ 791.080791] thunderbolt 0000:6b:00.6: 2: TMU: supports enhanced uni-directional mode
[ 791.080830] thunderbolt 0000:6b:00.6: 2: TMU: current mode: off
[ 791.081451] thunderbolt 0-2: new device found, vendor=0x1b device=0x11
[ 791.081454] thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
[ 791.081625] thunderbolt 0000:6b:00.6: 2: NVM version 56.81
[ 791.081873] thunderbolt 0000:6b:00.6: 0:3: is connected, link is up (state: 2)
[ 791.082058] thunderbolt 0000:6b:00.6: acking hot unplug event on 0:3
[ 791.082062] thunderbolt 0000:6b:00.6: acking hot unplug event on 2:2
[ 791.082089] thunderbolt 0000:6b:00.6: 0:3: total credits changed 128 -> 128
[ 791.082142] thunderbolt 0000:6b:00.6: 2: link width set to symmetric, dual lanes
[ 791.082222] thunderbolt 0000:6b:00.6: 0:2: reading NVM authentication status of retimers
[ 791.794037] thunderbolt 0-0:2.1: retimer NVM format of vendor 0x1da0 unknown
[ 791.794046] thunderbolt 0-0:2.1: NVM upgrade disabled
[ 791.794048] thunderbolt 0-0:2.1: new retimer found, vendor=0x1da0 device=0x8830
[ 791.794078] thunderbolt 0000:6b:00.6: 0:2: disabling sideband transactions
[ 791.894502] thunderbolt 0000:6b:00.6: 2: TMU: mode change off -> bi-directional, HiFi requested
[ 791.894540] thunderbolt 0000:6b:00.6: 0: TMU: local_time[0]=0x9532f794
[ 791.894546] thunderbolt 0000:6b:00.6: 0: TMU: local_time[1]=0x00005601
[ 791.894550] thunderbolt 0000:6b:00.6: 0: TMU: local_time[2]=0x00100000
[ 791.894665] thunderbolt 0000:6b:00.6: 2: TMU: updated local time to 0x56019532
[ 791.894839] thunderbolt 0000:6b:00.6: 2: TMU: mode set to: bi-directional, HiFi
[ 791.896236] thunderbolt 0000:6b:00.6: 2:1: reading NVM authentication status of retimers
[ 792.610907] thunderbolt 0-2:1.1: retimer NVM format of vendor 0x1da0 unknown
[ 792.610916] thunderbolt 0-2:1.1: NVM upgrade disabled
[ 792.610918] thunderbolt 0-2:1.1: new retimer found, vendor=0x1da0 device=0x8830
[ 792.610946] thunderbolt 0000:6b:00.6: 2:1: disabling sideband transactions
[ 792.712242] thunderbolt 0000:6b:00.6: 2:3: is unplugged (state: 7)
[ 792.712269] thunderbolt 0000:6b:00.6: 2:5: is unplugged (state: 7)
[ 792.712291] thunderbolt 0000:6b:00.6: 2:7: is unplugged (state: 7)
[ 792.712378] thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
[ 792.712451] thunderbolt 0000:6b:00.6: activating PCIe Down path from 0:5 to 2:9
[ 792.712521] thunderbolt 0000:6b:00.6: 0:5: Writing hop 0
[ 792.712525] thunderbolt 0000:6b:00.6: 0:5: In HopID: 8 => Out port: 2 Out HopID: 8
[ 792.712528] thunderbolt 0000:6b:00.6: 0:5: Weight: 1 Priority: 3 Credits: 0 Drop: 0 PM: 0
[ 792.712531] thunderbolt 0000:6b:00.6: 0:5: Counter enabled: 0 Counter index: 2047
[ 792.712533] thunderbolt 0000:6b:00.6: 0:5: Flow Control (In/Eg): 0/1 Shared Buffer (In/Eg): 0/0
[ 792.712535] thunderbolt 0000:6b:00.6: 0:5: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 792.712635] thunderbolt 0000:6b:00.6: 2:1: Writing hop 1
[ 792.712639] thunderbolt 0000:6b:00.6: 2:1: In HopID: 8 => Out port: 9 Out HopID: 8
[ 792.712641] thunderbolt 0000:6b:00.6: 2:1: Weight: 1 Priority: 3 Credits: 76 Drop: 0 PM: 0
[ 792.712643] thunderbolt 0000:6b:00.6: 2:1: Counter enabled: 0 Counter index: 2047
[ 792.712644] thunderbolt 0000:6b:00.6: 2:1: Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[ 792.712645] thunderbolt 0000:6b:00.6: 2:1: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 792.712686] thunderbolt 0000:6b:00.6: PCIe Down path activation complete
[ 792.712689] thunderbolt 0000:6b:00.6: activating PCIe Up path from 2:9 to 0:5
[ 792.712760] thunderbolt 0000:6b:00.6: 2:9: Writing hop 0
[ 792.712764] thunderbolt 0000:6b:00.6: 2:9: In HopID: 8 => Out port: 1 Out HopID: 8
[ 792.712767] thunderbolt 0000:6b:00.6: 2:9: Weight: 1 Priority: 3 Credits: 7 Drop: 0 PM: 0
[ 792.712769] thunderbolt 0000:6b:00.6: 2:9: Counter enabled: 0 Counter index: 2047
[ 792.712771] thunderbolt 0000:6b:00.6: 2:9: Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[ 792.712773] thunderbolt 0000:6b:00.6: 2:9: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 792.712818] thunderbolt 0000:6b:00.6: 0:2: Writing hop 1
[ 792.712822] thunderbolt 0000:6b:00.6: 0:2: In HopID: 8 => Out port: 5 Out HopID: 8
[ 792.712824] thunderbolt 0000:6b:00.6: 0:2: Weight: 1 Priority: 3 Credits: 32 Drop: 0 PM: 0
[ 792.712825] thunderbolt 0000:6b:00.6: 0:2: Counter enabled: 0 Counter index: 2047
[ 792.712827] thunderbolt 0000:6b:00.6: 0:2: Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[ 792.712828] thunderbolt 0000:6b:00.6: 0:2: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 792.712841] thunderbolt 0000:6b:00.6: PCIe Up path activation complete
[ 792.712908] thunderbolt 0000:6b:00.6: 0:3: got plug event for connected port, ignoring
[ 792.712916] thunderbolt 0000:6b:00.6: hotplug event for upstream port 2:2 (unplug: 0)
[ 792.712922] thunderbolt 0000:6b:00.6: 0:3: got unplug event for disconnected port, ignoring
[ 792.712925] thunderbolt 0000:6b:00.6: hotplug event for upstream port 2:2 (unplug: 1)
[ 795.408505] thunderbolt 0000:6b:00.6: acking hot plug event on 2:12
[ 795.408541] thunderbolt 0000:6b:00.6: 2:12: DP OUT resource available after hotplug
[ 795.408546] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 795.408559] thunderbolt 0000:6b:00.6: 0:6: DP IN available
[ 795.408571] thunderbolt 0000:6b:00.6: 2:12: DP OUT available
[ 795.408830] thunderbolt 0000:6b:00.6: 0: allocated DP resource for port 6
[ 795.408833] thunderbolt 0000:6b:00.6: 0:6: attached to bandwidth group 1
[ 795.408855] thunderbolt 0000:6b:00.6: 0:2: link maximum bandwidth 36000/36000 Mb/s
[ 795.408874] thunderbolt 0000:6b:00.6: 2:1: link maximum bandwidth 36000/36000 Mb/s
[ 795.408885] thunderbolt 0000:6b:00.6: available bandwidth for new DP tunnel 36000/36000 Mb/s
[ 795.408890] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): activating
[ 795.408947] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): DP IN maximum supported bandwidth 8100 Mb/s x4 = 25920 Mb/s
[ 795.408950] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): DP OUT maximum supported bandwidth 8100 Mb/s x4 = 25920 Mb/s
[ 795.408970] thunderbolt 0000:6b:00.6: activating Video path from 0:6 to 2:12
[ 795.408972] thunderbolt 0000:6b:00.6: 2:1: adding 6 NFC credits to 0
[ 795.408997] thunderbolt 0000:6b:00.6: 0:6: Writing hop 0
[ 795.408999] thunderbolt 0000:6b:00.6: 0:6: In HopID: 9 => Out port: 2 Out HopID: 9
[ 795.409000] thunderbolt 0000:6b:00.6: 0:6: Weight: 1 Priority: 1 Credits: 0 Drop: 0 PM: 0
[ 795.409008] thunderbolt 0000:6b:00.6: 0:6: Counter enabled: 0 Counter index: 2047
[ 795.409010] thunderbolt 0000:6b:00.6: 0:6: Flow Control (In/Eg): 0/0 Shared Buffer (In/Eg): 0/0
[ 795.409036] thunderbolt 0000:6b:00.6: 0:6: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 795.409097] thunderbolt 0000:6b:00.6: 2:1: Writing hop 1
[ 795.409099] thunderbolt 0000:6b:00.6: 2:1: In HopID: 9 => Out port: 12 Out HopID: 9
[ 795.409101] thunderbolt 0000:6b:00.6: 2:1: Weight: 1 Priority: 1 Credits: 0 Drop: 0 PM: 0
[ 795.409103] thunderbolt 0000:6b:00.6: 2:1: Counter enabled: 0 Counter index: 2047
[ 795.409104] thunderbolt 0000:6b:00.6: 2:1: Flow Control (In/Eg): 0/0 Shared Buffer (In/Eg): 0/0
[ 795.409106] thunderbolt 0000:6b:00.6: 2:1: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 795.409138] thunderbolt 0000:6b:00.6: Video path activation complete
[ 795.409142] thunderbolt 0000:6b:00.6: activating AUX TX path from 0:6 to 2:12
[ 795.409171] thunderbolt 0000:6b:00.6: 0:6: Writing hop 0
[ 795.409174] thunderbolt 0000:6b:00.6: 0:6: In HopID: 8 => Out port: 2 Out HopID: 10
[ 795.409175] thunderbolt 0000:6b:00.6: 0:6: Weight: 1 Priority: 2 Credits: 0 Drop: 0 PM: 0
[ 795.409177] thunderbolt 0000:6b:00.6: 0:6: Counter enabled: 0 Counter index: 2047
[ 795.409179] thunderbolt 0000:6b:00.6: 0:6: Flow Control (In/Eg): 0/1 Shared Buffer (In/Eg): 0/0
[ 795.409181] thunderbolt 0000:6b:00.6: 0:6: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 795.409232] thunderbolt 0000:6b:00.6: 2:1: Writing hop 1
[ 795.409236] thunderbolt 0000:6b:00.6: 2:1: In HopID: 10 => Out port: 12 Out HopID: 8
[ 795.409239] thunderbolt 0000:6b:00.6: 2:1: Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[ 795.409241] thunderbolt 0000:6b:00.6: 2:1: Counter enabled: 0 Counter index: 2047
[ 795.409243] thunderbolt 0000:6b:00.6: 2:1: Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[ 795.409245] thunderbolt 0000:6b:00.6: 2:1: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 795.409267] thunderbolt 0000:6b:00.6: AUX TX path activation complete
[ 795.409269] thunderbolt 0000:6b:00.6: activating AUX RX path from 2:12 to 0:6
[ 795.409313] thunderbolt 0000:6b:00.6: 2:12: Writing hop 0
[ 795.409318] thunderbolt 0000:6b:00.6: 2:12: In HopID: 8 => Out port: 1 Out HopID: 9
[ 795.409320] thunderbolt 0000:6b:00.6: 2:12: Weight: 1 Priority: 2 Credits: 5 Drop: 0 PM: 0
[ 795.409322] thunderbolt 0000:6b:00.6: 2:12: Counter enabled: 0 Counter index: 2047
[ 795.409324] thunderbolt 0000:6b:00.6: 2:12: Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[ 795.409326] thunderbolt 0000:6b:00.6: 2:12: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 795.409379] thunderbolt 0000:6b:00.6: 0:2: Writing hop 1
[ 795.409381] thunderbolt 0000:6b:00.6: 0:2: In HopID: 9 => Out port: 6 Out HopID: 8
[ 795.409383] thunderbolt 0000:6b:00.6: 0:2: Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[ 795.409385] thunderbolt 0000:6b:00.6: 0:2: Counter enabled: 0 Counter index: 2047
[ 795.409386] thunderbolt 0000:6b:00.6: 0:2: Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[ 795.409388] thunderbolt 0000:6b:00.6: 0:2: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 795.409416] thunderbolt 0000:6b:00.6: AUX RX path activation complete
[ 795.409514] thunderbolt 0000:6b:00.6: 0:7: DP IN available
[ 795.409529] thunderbolt 0000:6b:00.6: 2:12: DP OUT in use
[ 795.409532] thunderbolt 0000:6b:00.6: 0:7: no suitable DP OUT adapter available, not tunneling
[ 795.409816] amdgpu 0000:69:00.0: [drm] DMUB HPD IRQ callback: link_index=7
[ 795.434537] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): DPRX read timeout
[ 795.483280] amdgpu 0000:69:00.0: [drm] DMUB HPD IRQ callback: link_index=7
[ 795.485836] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): DPRX capabilities read completed
[ 795.485887] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): consumed bandwidth 0/17280 Mb/s
[ 795.485894] thunderbolt 0000:6b:00.6: bandwidth consumption changed, re-calculating estimated bandwidth
[ 795.485896] thunderbolt 0000:6b:00.6: re-calculating bandwidth estimation for group 1
[ 795.485912] thunderbolt 0000:6b:00.6: bandwidth estimation for group 1 done
[ 795.485915] thunderbolt 0000:6b:00.6: bandwidth re-calculation done
[ 795.514596] thunderbolt 0000:6b:00.6: acking hot unplug event on 2:12
[ 795.514633] thunderbolt 0000:6b:00.6: 2:12: DP OUT resource unavailable: adapter unplug
[ 795.514638] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): deactivating
[ 795.514736] thunderbolt 0000:6b:00.6: deactivating Video path from 0:6 to 2:12
[ 795.514812] thunderbolt 0000:6b:00.6: 2:1: adding -6 NFC credits to 6
[ 795.514827] thunderbolt 0000:6b:00.6: deactivating AUX TX path from 0:6 to 2:12
[ 795.514899] thunderbolt 0000:6b:00.6: deactivating AUX RX path from 2:12 to 0:6
[ 795.515019] thunderbolt 0000:6b:00.6: 0:6: detached from bandwidth group 1
[ 795.515187] thunderbolt 0000:6b:00.6: 0: released DP resource for port 6
[ 795.515193] thunderbolt 0000:6b:00.6: bandwidth consumption changed, re-calculating estimated bandwidth
[ 795.515195] thunderbolt 0000:6b:00.6: bandwidth re-calculation done
[ 795.515197] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 795.515212] thunderbolt 0000:6b:00.6: 0:6: DP IN available
[ 795.515214] thunderbolt 0000:6b:00.6: 0:6: no suitable DP OUT adapter available, not tunneling
[ 795.515228] thunderbolt 0000:6b:00.6: 0:7: DP IN available
[ 795.515230] thunderbolt 0000:6b:00.6: 0:7: no suitable DP OUT adapter available, not tunneling
[ 797.722389] thunderbolt 0000:6b:00.6: acking hot plug event on 2:12
[ 797.722442] thunderbolt 0000:6b:00.6: 2:12: DP OUT resource available after hotplug
[ 797.722448] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 797.722496] thunderbolt 0000:6b:00.6: 0:6: DP IN available
[ 797.722553] thunderbolt 0000:6b:00.6: 2:12: DP OUT available
[ 797.722813] thunderbolt 0000:6b:00.6: 0: allocated DP resource for port 6
[ 797.722817] thunderbolt 0000:6b:00.6: 0:6: attached to bandwidth group 1
[ 797.722840] thunderbolt 0000:6b:00.6: 0:2: link maximum bandwidth 36000/36000 Mb/s
[ 797.722860] thunderbolt 0000:6b:00.6: 2:1: link maximum bandwidth 36000/36000 Mb/s
[ 797.722871] thunderbolt 0000:6b:00.6: available bandwidth for new DP tunnel 36000/36000 Mb/s
[ 797.722876] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): activating
[ 797.722934] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): DP IN maximum supported bandwidth 8100 Mb/s x4 = 25920 Mb/s
[ 797.722937] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): DP OUT maximum supported bandwidth 8100 Mb/s x4 = 25920 Mb/s
[ 797.722958] thunderbolt 0000:6b:00.6: activating Video path from 0:6 to 2:12
[ 797.722960] thunderbolt 0000:6b:00.6: 2:1: adding 6 NFC credits to 0
[ 797.722985] thunderbolt 0000:6b:00.6: 0:6: Writing hop 0
[ 797.722987] thunderbolt 0000:6b:00.6: 0:6: In HopID: 9 => Out port: 2 Out HopID: 9
[ 797.722989] thunderbolt 0000:6b:00.6: 0:6: Weight: 1 Priority: 1 Credits: 0 Drop: 0 PM: 0
[ 797.722991] thunderbolt 0000:6b:00.6: 0:6: Counter enabled: 0 Counter index: 2047
[ 797.722993] thunderbolt 0000:6b:00.6: 0:6: Flow Control (In/Eg): 0/0 Shared Buffer (In/Eg): 0/0
[ 797.722995] thunderbolt 0000:6b:00.6: 0:6: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 797.723028] thunderbolt 0000:6b:00.6: 2:1: Writing hop 1
[ 797.723030] thunderbolt 0000:6b:00.6: 2:1: In HopID: 9 => Out port: 12 Out HopID: 9
[ 797.723032] thunderbolt 0000:6b:00.6: 2:1: Weight: 1 Priority: 1 Credits: 0 Drop: 0 PM: 0
[ 797.723033] thunderbolt 0000:6b:00.6: 2:1: Counter enabled: 0 Counter index: 2047
[ 797.723035] thunderbolt 0000:6b:00.6: 2:1: Flow Control (In/Eg): 0/0 Shared Buffer (In/Eg): 0/0
[ 797.723037] thunderbolt 0000:6b:00.6: 2:1: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 797.723049] thunderbolt 0000:6b:00.6: Video path activation complete
[ 797.723051] thunderbolt 0000:6b:00.6: activating AUX TX path from 0:6 to 2:12
[ 797.723073] thunderbolt 0000:6b:00.6: 0:6: Writing hop 0
[ 797.723096] thunderbolt 0000:6b:00.6: 0:6: In HopID: 8 => Out port: 2 Out HopID: 10
[ 797.723101] thunderbolt 0000:6b:00.6: 0:6: Weight: 1 Priority: 2 Credits: 0 Drop: 0 PM: 0
[ 797.723103] thunderbolt 0000:6b:00.6: 0:6: Counter enabled: 0 Counter index: 2047
[ 797.723105] thunderbolt 0000:6b:00.6: 0:6: Flow Control (In/Eg): 0/1 Shared Buffer (In/Eg): 0/0
[ 797.723107] thunderbolt 0000:6b:00.6: 0:6: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 797.723163] thunderbolt 0000:6b:00.6: 2:1: Writing hop 1
[ 797.723165] thunderbolt 0000:6b:00.6: 2:1: In HopID: 10 => Out port: 12 Out HopID: 8
[ 797.723167] thunderbolt 0000:6b:00.6: 2:1: Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[ 797.723168] thunderbolt 0000:6b:00.6: 2:1: Counter enabled: 0 Counter index: 2047
[ 797.723170] thunderbolt 0000:6b:00.6: 2:1: Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[ 797.723171] thunderbolt 0000:6b:00.6: 2:1: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 797.723203] thunderbolt 0000:6b:00.6: AUX TX path activation complete
[ 797.723207] thunderbolt 0000:6b:00.6: activating AUX RX path from 2:12 to 0:6
[ 797.723250] thunderbolt 0000:6b:00.6: 2:12: Writing hop 0
[ 797.723254] thunderbolt 0000:6b:00.6: 2:12: In HopID: 8 => Out port: 1 Out HopID: 9
[ 797.723256] thunderbolt 0000:6b:00.6: 2:12: Weight: 1 Priority: 2 Credits: 5 Drop: 0 PM: 0
[ 797.723258] thunderbolt 0000:6b:00.6: 2:12: Counter enabled: 0 Counter index: 2047
[ 797.723260] thunderbolt 0000:6b:00.6: 2:12: Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[ 797.723262] thunderbolt 0000:6b:00.6: 2:12: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 797.723311] thunderbolt 0000:6b:00.6: 0:2: Writing hop 1
[ 797.723313] thunderbolt 0000:6b:00.6: 0:2: In HopID: 9 => Out port: 6 Out HopID: 8
[ 797.723315] thunderbolt 0000:6b:00.6: 0:2: Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[ 797.723316] thunderbolt 0000:6b:00.6: 0:2: Counter enabled: 0 Counter index: 2047
[ 797.723318] thunderbolt 0000:6b:00.6: 0:2: Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[ 797.723319] thunderbolt 0000:6b:00.6: 0:2: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 797.723347] thunderbolt 0000:6b:00.6: AUX RX path activation complete
[ 797.723412] thunderbolt 0000:6b:00.6: 0:7: DP IN available
[ 797.723425] thunderbolt 0000:6b:00.6: 2:12: DP OUT in use
[ 797.723427] thunderbolt 0000:6b:00.6: 0:7: no suitable DP OUT adapter available, not tunneling
[ 797.723711] amdgpu 0000:69:00.0: [drm] DMUB HPD IRQ callback: link_index=7
[ 797.748519] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): DPRX read timeout
[ 797.799054] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): DPRX capabilities read completed
[ 797.799173] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): consumed bandwidth 0/25920 Mb/s
[ 797.799182] thunderbolt 0000:6b:00.6: bandwidth consumption changed, re-calculating estimated bandwidth
[ 797.799185] thunderbolt 0000:6b:00.6: re-calculating bandwidth estimation for group 1
[ 797.799224] thunderbolt 0000:6b:00.6: bandwidth estimation for group 1 done
[ 797.799228] thunderbolt 0000:6b:00.6: bandwidth re-calculation done
[-- Attachment #3: state-after-dock-sanitized.txt --]
[-- Type: text/plain, Size: 150 bytes --]
=== time ===
Wed Sep 23 00:19:05 CST 2026
=== 00:04.1 after ===
auto
suspended
D3cold
=== 09:00.0 ===
missing
=== 6b:00.6 after ===
auto
active
D0
[-- Attachment #4: state-before-dock-sanitized.txt --]
[-- Type: text/plain, Size: 465 bytes --]
=== time ===
Wed Sep 23 00:17:34 CST 2026
=== kernel ===
Linux X13 7.2.6-1-cachyos #1 SMP PREEMPT_DYNAMIC Wed, 16 Sep 2026 15:01:18 +0000 x86_64 GNU/Linux
=== cmdline ===
quiet nowatchdog splash rw rootflags=subvol=/@ rd.luks.uuid=<LUKS_UUID_REDACTED> rd.luks.options=<LUKS_UUID_REDACTED>=tpm2-device=auto root=/dev/mapper/luks-<LUKS_UUID_REDACTED> thunderbolt.dyndbg=+p
=== 00:04.1 before ===
auto
suspended
D3cold
=== 6b:00.6 before ===
auto
suspended
D3cold
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-22 16:40 ` Freeman Z
@ 2026-09-22 17:02 ` Kovacs, Alexander
2026-09-22 17:03 ` Kovacs, Alexander
2026-09-22 19:54 ` Kovacs, Alexander
1 sibling, 1 reply; 40+ messages in thread
From: Kovacs, Alexander @ 2026-09-22 17:02 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj
AMD General
Freeman Z,
I didn't see the complete attached dmesg, only the snippets?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, September 22, 2026 11:41 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
[You don't often get email from shd-isac@outlook.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mika, Mario,
I reproduced the failure following the requested sequence on my installed CachyOS system with kernel 7.2.6-1-cachyos and thunderbolt.dyndbg=+p.
For this trace the dock was physically disconnected at boot. I did not run lspci before or during the reproduction.
Before plugging the dock:
0000:00:04.1
power/control = auto
power/runtime_status = suspended
power_state = D3cold
0000:6b:00.6
power/control = auto
power/runtime_status = suspended
power_state = D3cold
After plugging the Kensington SD5000T5 and waiting about 15 seconds:
0000:00:04.1
power/control = auto
power/runtime_status = suspended
power_state = D3cold
0000:09:00.0
missing
0000:6b:00.6
power/control = auto
power/runtime_status = active
power_state = D0
The Thunderbolt dynamic debug log shows the NHI/control channel waking and the USB4 fabric being configured. In particular:
thunderbolt 0000:6b:00.6: control channel starting...
thunderbolt 0000:6b:00.6: 0: resuming switch
thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state: 2)
thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
thunderbolt 0000:6b:00.6: PCIe Down path activation complete
thunderbolt 0000:6b:00.6: PCIe Up path activation complete
However, I do not see a PME message corresponding to the dock insertion.
The PME messages in the full dmesg are the early-boot
"PME: Signaling with IRQ ..." initialization messages.
So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold to D0 and the Thunderbolt driver successfully programs the PCIe tunnel in the
USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1 remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
I attached the full dmesg captured after the dock plug, plus the small before/after state files. I redacted only unrelated local network identifiers, the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device UIDs are otherwise unchanged.
This particular dynamic-debug trace was collected on CachyOS rather than the Arch stock kernel used for my earlier reproduction.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Monday, September 21, 2026 23:24
To: Mika Westerberg <mika.westerberg@linux.intel.com>; Freeman Z <SHD-ISAC@outlook.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; Sanath S <Sanath.S@amd.com>; Basavaraj Natikar <Basavaraj.Natikar@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
+Alex K
On 9/21/26 00:04, Mika Westerberg wrote:
> Hi,
>
> Adding AMD folks in case this is known issue.
>
> On Sat, Sep 19, 2026 at 12:39:37PM +0000, Freeman Z wrote:
>> Hello,
>>
>> I am seeing a reproducible USB4/PCIe runtime-PM problem on an ASUS
>> ROG Flow X13 GV302XV (Ryzen 9 7940HS / Phoenix) with a Kensington
>> SD5000T5 EQ Thunderbolt 5 dock connected to the laptop's USB4 host port.
>>
>> The failure is reproducible with the official Arch Linux Live ISO
>> using Arch's stock `linux` kernel:
>>
>> 7.2.2-arch1-1
>>
>> I have not yet tested a self-built kernel.org mainline/vanilla kernel.
>> I can test patches, or collect additional traces if requested.
>
> Can you provide full dmesg with "thunderbolt.dyndbg=+p" in the kernel
> command line?
>
> With the below steps (following your description):
>
> 0. Drop all non-standard command line options except the above.
> 1. Boot the system up, nothing connected.
> 2. Once up let the TB and the related PCIe root ports enter D3cold
>(don't
> run lspci it will wake them up but you can look at the runtime
>status that
> they are all suspended).
> 3. Plug in the dock.
>
> We should see in the dmesg the PME if it works as expected. If not
> then it may be that there is something wrong with the wakeup path.
There was something like this that was reported in the past, but it was a race condition of some sort. It ended up being fixed by a non-obvious optimization (I forget the specific commit).
But it was definitely older than 7.2, so it sounds like it might have regressed again.
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-22 17:02 ` Kovacs, Alexander
@ 2026-09-22 17:03 ` Kovacs, Alexander
0 siblings, 0 replies; 40+ messages in thread
From: Kovacs, Alexander @ 2026-09-22 17:03 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj
AMD General
Skip my previous message, a formatting issue on my system....
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Kovacs, Alexander
Sent: Tuesday, September 22, 2026 12:03 PM
To: 'Freeman Z' <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Freeman Z,
I didn't see the complete attached dmesg, only the snippets?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, September 22, 2026 11:41 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
[You don't often get email from shd-isac@outlook.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mika, Mario,
I reproduced the failure following the requested sequence on my installed CachyOS system with kernel 7.2.6-1-cachyos and thunderbolt.dyndbg=+p.
For this trace the dock was physically disconnected at boot. I did not run lspci before or during the reproduction.
Before plugging the dock:
0000:00:04.1
power/control = auto
power/runtime_status = suspended
power_state = D3cold
0000:6b:00.6
power/control = auto
power/runtime_status = suspended
power_state = D3cold
After plugging the Kensington SD5000T5 and waiting about 15 seconds:
0000:00:04.1
power/control = auto
power/runtime_status = suspended
power_state = D3cold
0000:09:00.0
missing
0000:6b:00.6
power/control = auto
power/runtime_status = active
power_state = D0
The Thunderbolt dynamic debug log shows the NHI/control channel waking and the USB4 fabric being configured. In particular:
thunderbolt 0000:6b:00.6: control channel starting...
thunderbolt 0000:6b:00.6: 0: resuming switch
thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state: 2)
thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
thunderbolt 0000:6b:00.6: PCIe Down path activation complete
thunderbolt 0000:6b:00.6: PCIe Up path activation complete
However, I do not see a PME message corresponding to the dock insertion.
The PME messages in the full dmesg are the early-boot
"PME: Signaling with IRQ ..." initialization messages.
So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold to D0 and the Thunderbolt driver successfully programs the PCIe tunnel in the
USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1 remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
I attached the full dmesg captured after the dock plug, plus the small before/after state files. I redacted only unrelated local network identifiers, the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device UIDs are otherwise unchanged.
This particular dynamic-debug trace was collected on CachyOS rather than the Arch stock kernel used for my earlier reproduction.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Monday, September 21, 2026 23:24
To: Mika Westerberg <mika.westerberg@linux.intel.com>; Freeman Z <SHD-ISAC@outlook.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; Sanath S <Sanath.S@amd.com>; Basavaraj Natikar <Basavaraj.Natikar@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
+Alex K
On 9/21/26 00:04, Mika Westerberg wrote:
> Hi,
>
> Adding AMD folks in case this is known issue.
>
> On Sat, Sep 19, 2026 at 12:39:37PM +0000, Freeman Z wrote:
>> Hello,
>>
>> I am seeing a reproducible USB4/PCIe runtime-PM problem on an ASUS
>> ROG Flow X13 GV302XV (Ryzen 9 7940HS / Phoenix) with a Kensington
>> SD5000T5 EQ Thunderbolt 5 dock connected to the laptop's USB4 host port.
>>
>> The failure is reproducible with the official Arch Linux Live ISO
>> using Arch's stock `linux` kernel:
>>
>> 7.2.2-arch1-1
>>
>> I have not yet tested a self-built kernel.org mainline/vanilla kernel.
>> I can test patches, or collect additional traces if requested.
>
> Can you provide full dmesg with "thunderbolt.dyndbg=+p" in the kernel
> command line?
>
> With the below steps (following your description):
>
> 0. Drop all non-standard command line options except the above.
> 1. Boot the system up, nothing connected.
> 2. Once up let the TB and the related PCIe root ports enter D3cold
>(don't
> run lspci it will wake them up but you can look at the runtime
>status that
> they are all suspended).
> 3. Plug in the dock.
>
> We should see in the dmesg the PME if it works as expected. If not
> then it may be that there is something wrong with the wakeup path.
There was something like this that was reported in the past, but it was a race condition of some sort. It ended up being fixed by a non-obvious optimization (I forget the specific commit).
But it was definitely older than 7.2, so it sounds like it might have regressed again.
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-22 16:40 ` Freeman Z
2026-09-22 17:02 ` Kovacs, Alexander
@ 2026-09-22 19:54 ` Kovacs, Alexander
2026-09-22 20:00 ` Mario Limonciello
1 sibling, 1 reply; 40+ messages in thread
From: Kovacs, Alexander @ 2026-09-22 19:54 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan
AMD General
+Juan
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, September 22, 2026 11:41 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
[You don't often get email from shd-isac@outlook.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mika, Mario,
I reproduced the failure following the requested sequence on my installed CachyOS system with kernel 7.2.6-1-cachyos and thunderbolt.dyndbg=+p.
For this trace the dock was physically disconnected at boot. I did not run lspci before or during the reproduction.
Before plugging the dock:
0000:00:04.1
power/control = auto
power/runtime_status = suspended
power_state = D3cold
0000:6b:00.6
power/control = auto
power/runtime_status = suspended
power_state = D3cold
After plugging the Kensington SD5000T5 and waiting about 15 seconds:
0000:00:04.1
power/control = auto
power/runtime_status = suspended
power_state = D3cold
0000:09:00.0
missing
0000:6b:00.6
power/control = auto
power/runtime_status = active
power_state = D0
The Thunderbolt dynamic debug log shows the NHI/control channel waking and the USB4 fabric being configured. In particular:
thunderbolt 0000:6b:00.6: control channel starting...
thunderbolt 0000:6b:00.6: 0: resuming switch
thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state: 2)
thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
thunderbolt 0000:6b:00.6: PCIe Down path activation complete
thunderbolt 0000:6b:00.6: PCIe Up path activation complete
However, I do not see a PME message corresponding to the dock insertion.
The PME messages in the full dmesg are the early-boot
"PME: Signaling with IRQ ..." initialization messages.
So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold to D0 and the Thunderbolt driver successfully programs the PCIe tunnel in the
USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1 remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
I attached the full dmesg captured after the dock plug, plus the small before/after state files. I redacted only unrelated local network identifiers, the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device UIDs are otherwise unchanged.
This particular dynamic-debug trace was collected on CachyOS rather than the Arch stock kernel used for my earlier reproduction.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Monday, September 21, 2026 23:24
To: Mika Westerberg <mika.westerberg@linux.intel.com>; Freeman Z <SHD-ISAC@outlook.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; Sanath S <Sanath.S@amd.com>; Basavaraj Natikar <Basavaraj.Natikar@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
+Alex K
On 9/21/26 00:04, Mika Westerberg wrote:
> Hi,
>
> Adding AMD folks in case this is known issue.
>
> On Sat, Sep 19, 2026 at 12:39:37PM +0000, Freeman Z wrote:
>> Hello,
>>
>> I am seeing a reproducible USB4/PCIe runtime-PM problem on an ASUS
>> ROG Flow X13 GV302XV (Ryzen 9 7940HS / Phoenix) with a Kensington
>> SD5000T5 EQ Thunderbolt 5 dock connected to the laptop's USB4 host port.
>>
>> The failure is reproducible with the official Arch Linux Live ISO
>> using Arch's stock `linux` kernel:
>>
>> 7.2.2-arch1-1
>>
>> I have not yet tested a self-built kernel.org mainline/vanilla kernel.
>> I can test patches, or collect additional traces if requested.
>
> Can you provide full dmesg with "thunderbolt.dyndbg=+p" in the kernel
> command line?
>
> With the below steps (following your description):
>
> 0. Drop all non-standard command line options except the above.
> 1. Boot the system up, nothing connected.
> 2. Once up let the TB and the related PCIe root ports enter D3cold
>(don't
> run lspci it will wake them up but you can look at the runtime
>status that
> they are all suspended).
> 3. Plug in the dock.
>
> We should see in the dmesg the PME if it works as expected. If not
> then it may be that there is something wrong with the wakeup path.
There was something like this that was reported in the past, but it was a race condition of some sort. It ended up being fixed by a non-obvious optimization (I forget the specific commit).
But it was definitely older than 7.2, so it sounds like it might have regressed again.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-22 19:54 ` Kovacs, Alexander
@ 2026-09-22 20:00 ` Mario Limonciello
2026-09-23 11:51 ` Freeman Z
0 siblings, 1 reply; 40+ messages in thread
From: Mario Limonciello @ 2026-09-22 20:00 UTC (permalink / raw)
To: Kovacs, Alexander, Freeman Z, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan
> -----Original Message-----
> From: Freeman Z <SHD-ISAC@outlook.com>
> Sent: Tuesday, September 22, 2026 11:41 AM
> To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
>
> [You don't often get email from shd-isac@outlook.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
>
>
> Hi Mika, Mario,
>
> I reproduced the failure following the requested sequence on my installed CachyOS system with kernel 7.2.6-1-cachyos and thunderbolt.dyndbg=+p.
>
> For this trace the dock was physically disconnected at boot. I did not run lspci before or during the reproduction.
>
> Before plugging the dock:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> After plugging the Kensington SD5000T5 and waiting about 15 seconds:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:09:00.0
> missing
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = active
> power_state = D0
>
> The Thunderbolt dynamic debug log shows the NHI/control channel waking and the USB4 fabric being configured. In particular:
>
> thunderbolt 0000:6b:00.6: control channel starting...
> thunderbolt 0000:6b:00.6: 0: resuming switch
> thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state: 2)
> thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
> thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
> thunderbolt 0000:6b:00.6: PCIe Down path activation complete
> thunderbolt 0000:6b:00.6: PCIe Up path activation complete
>
> However, I do not see a PME message corresponding to the dock insertion.
> The PME messages in the full dmesg are the early-boot
> "PME: Signaling with IRQ ..." initialization messages.
>
> So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold to D0 and the Thunderbolt driver successfully programs the PCIe tunnel in the
> USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1 remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
>
> I attached the full dmesg captured after the dock plug, plus the small before/after state files. I redacted only unrelated local network identifiers, the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device UIDs are otherwise unchanged.
>
> This particular dynamic-debug trace was collected on CachyOS rather than the Arch stock kernel used for my earlier reproduction.
>
It sure sounds like a PME doesn't deliver properly for some reason.
I suppose that while in this state - if you ran lspci the root port at
0000:00:04.1 exits D3cold and 0000:09:00.0 shows up, right?
Does the PME show up in the logs after you've done this?
Any chance you can easily check Ubuntu 26.04.1 live media? There is a
7.0 based kernel there, and I would like to know if this regressed from
that.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-22 20:00 ` Mario Limonciello
@ 2026-09-23 11:51 ` Freeman Z
2026-09-23 12:26 ` Kovacs, Alexander
2026-09-23 19:37 ` Kovacs, Alexander
0 siblings, 2 replies; 40+ messages in thread
From: Freeman Z @ 2026-09-23 11:51 UTC (permalink / raw)
To: Mario Limonciello, Kovacs, Alexander, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan
[-- Attachment #1: Type: text/plain, Size: 6487 bytes --]
Hi Mario, Mika and Alex,
I tested the Kensington SD5000T5 dock again by using Ubuntu 26.04.1 Live
with kernel 7.0.0-30-generic and thunderbolt.dyndbg=+p. The dock was
disconnected at boot, and I did not run lspci before the hotplug
log and power states had been saved.
In this Ubuntu run the PCIe/USB enumeration worked without any workaround:
426.716: USB4 dock connection detected (host port 0:2, link up)
426.753: Kensington SD5000T5 discovered
428.410: PCIe Down path activation complete
428.411: PCIe Up path activation complete
429.025: pcieport 0000:00:04.1 reports Card present / Link Up
429.026: downstream 0000:09:00.0 (8086:5786) enumerated
After the dock had connected, but *before* running lspci, the sysfs
states were:
0000:00:04.1 power/control=auto; runtime_status=active; power_state=D0
0000:09:00.0 present
0000:6b:00.6 runtime_status=active; power_state=D0
The downstream USB devices and dock Ethernet also enumerated. I then
ran lspci once: 0000:00:04.1 remained active/D0, 0000:09:00.0 remained
present. Thus this run cannot show an lspci-triggered wakeup or a
resulting PME event: it was already working.
In my previous failing CachyOS runs, invoking lspci could wake 00:04.1
and make 09:00.0 appear. I do not see an explicit PME delivery message
at hotplug in the Ubuntu dmesg.
The external display did still flicker. The Ubuntu log includes one
DP tunnel DPRX read timeout at ~431.188s, followed by a completed
capability read at ~431.239s, I do not know if it's related.
Attached are the full Ubuntu dmesg after/before hotplug and the state files.
Unrelated USB serial numbers and network interface MAC addresses are redacted.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Wednesday, September 23, 2026 4:00
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
> -----Original Message-----
> From: Freeman Z <SHD-ISAC@outlook.com>
> Sent: Tuesday, September 22, 2026 11:41 AM
> To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
>
> [You don't often get email from shd-isac@outlook.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
>
>
> Hi Mika, Mario,
>
> I reproduced the failure following the requested sequence on my installed CachyOS system with kernel 7.2.6-1-cachyos and thunderbolt.dyndbg=+p.
>
> For this trace the dock was physically disconnected at boot. I did not run lspci before or during the reproduction.
>
> Before plugging the dock:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> After plugging the Kensington SD5000T5 and waiting about 15 seconds:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:09:00.0
> missing
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = active
> power_state = D0
>
> The Thunderbolt dynamic debug log shows the NHI/control channel waking and the USB4 fabric being configured. In particular:
>
> thunderbolt 0000:6b:00.6: control channel starting...
> thunderbolt 0000:6b:00.6: 0: resuming switch
> thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state: 2)
> thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
> thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
> thunderbolt 0000:6b:00.6: PCIe Down path activation complete
> thunderbolt 0000:6b:00.6: PCIe Up path activation complete
>
> However, I do not see a PME message corresponding to the dock insertion.
> The PME messages in the full dmesg are the early-boot
> "PME: Signaling with IRQ ..." initialization messages.
>
> So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold to D0 and the Thunderbolt driver successfully programs the PCIe tunnel in the
> USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1 remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
>
> I attached the full dmesg captured after the dock plug, plus the small before/after state files. I redacted only unrelated local network identifiers, the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device UIDs are otherwise unchanged.
>
> This particular dynamic-debug trace was collected on CachyOS rather than the Arch stock kernel used for my earlier reproduction.
>
It sure sounds like a PME doesn't deliver properly for some reason.
I suppose that while in this state - if you ran lspci the root port at
0000:00:04.1 exits D3cold and 0000:09:00.0 shows up, right?
Does the PME show up in the logs after you've done this?
Any chance you can easily check Ubuntu 26.04.1 live media? There is a
7.0 based kernel there, and I would like to know if this regressed from
that.
[-- Attachment #2: ubuntu70-usb4-dmesg-after-hotplug-sanitized.txt --]
[-- Type: text/plain, Size: 177319 bytes --]
[ 0.000000] Linux version 7.0.0-30-generic (buildd@lcy02-amd64-048) (x86_64-linux-gnu-gcc (Ubuntu 15.2.0-16ubuntu1) 15.2.0, GNU ld (GNU Binutils for Ubuntu) 2.46) #30-Ubuntu SMP PREEMPT_DYNAMIC Fri Jul 31 18:22:54 UTC 2026 (Ubuntu 7.0.0-30.30-generic 7.0.12)
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz thunderbolt.dyndbg=+p --- quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] System RAM
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] device reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009a7efff] System RAM
[ 0.000000] BIOS-e820: [mem 0x0000000009a7f000-0x0000000009ffffff] device reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] System RAM
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a23bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a23c000-0x00000000ae2fefff] System RAM
[ 0.000000] BIOS-e820: [mem 0x00000000ae2ff000-0x00000000b10fefff] device reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b10ff000-0x00000000b11fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b11ff000-0x00000000b66fefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b66ff000-0x00000000badfefff] device reserved
[ 0.000000] BIOS-e820: [mem 0x00000000badff000-0x00000000bbff8fff] System RAM
[ 0.000000] BIOS-e820: [mem 0x00000000bbff9000-0x00000000bbffcfff] device reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bbffd000-0x00000000bbffefff] System RAM
[ 0.000000] BIOS-e820: [mem 0x00000000bbfff000-0x00000000bcffffff] device reserved
[ 0.000000] BIOS-e820: [gap 0x00000000bd000000-0x00000000bd78ffff]
[ 0.000000] BIOS-e820: [mem 0x00000000bd790000-0x00000000bd7effff] device reserved
[ 0.000000] BIOS-e820: [gap 0x00000000bd7f0000-0x00000000bd7f4fff]
[ 0.000000] BIOS-e820: [mem 0x00000000bd7f5000-0x00000000bfffffff] device reserved
[ 0.000000] BIOS-e820: [gap 0x00000000c0000000-0x00000000dfffffff]
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] device reserved
[ 0.000000] BIOS-e820: [gap 0x00000000f0000000-0x00000000fcffffff]
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] device reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e2fffff] System RAM
[ 0.000000] BIOS-e820: [gap 0x000000041e300000-0x000000041f33ffff]
[ 0.000000] BIOS-e820: [mem 0x000000041f340000-0x00000004601fffff] device reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] efi: EFI v2.8 by American Megatrends
[ 0.000000] efi: ACPI=0xb11fe000 ACPI 2.0=0xb11fe014 TPMFinalLog=0xb66b1000 SMBIOS=0xbaa79000 SMBIOS 3.0=0xbaa78000 MEMATTR=0xa8968018 ESRT=0xacfce198 MOKvar=0xbaad9000 INITRD=0xa67b3598 RNG=0xb118d018 TPMEventLog=0xb1187018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem66: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] device reserved
[ 0.000000] efi: Remove mem67: MMIO range=[0xfd000000-0xfedfffff] (30MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd000000-0xfedfffff] device reserved
[ 0.000000] efi: Not removing mem68: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem69: MMIO range=[0xfee01000-0xffffffff] (17MB) from e820 map
[ 0.000000] e820: remove [mem 0xfee01000-0xffffffff] device reserved
[ 0.000000] efi: Remove mem71: MMIO range=[0x440000000-0x4601fffff] (514MB) from e820 map
[ 0.000000] e820: remove [mem 0x440000000-0x4601fffff] device reserved
[ 0.000000] SMBIOS 3.5.0 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. ROG Flow X13 GV302XV_GV302XV/GV302XV, BIOS GV302XV.319 02/20/2025
[ 0.000000] DMI: Memory slots populated: 4/4
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3992.676 MHz processor
[ 0.000072] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved
[ 0.000073] e820: remove [mem 0x000a0000-0x000fffff] System RAM
[ 0.000078] last_pfn = 0x41e300 max_arch_pfn = 0x400000000
[ 0.000083] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
[ 0.000085] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000249] e820: update [mem 0xc0000000-0xffffffff] System RAM ==> device reserved
[ 0.000256] last_pfn = 0xbbfff max_arch_pfn = 0x400000000
[ 0.002763] esrt: Reserving ESRT space from 0x00000000acfce198 to 0x00000000acfce1d0.
[ 0.002769] e820: update [mem 0xacfce000-0xacfcefff] System RAM ==> device reserved
[ 0.002780] Using GB pages for direct mapping
[ 0.002994] secureboot: Secure boot disabled
[ 0.002994] RAMDISK: [mem 0x96628000-0x9c138fff]
[ 0.003320] ACPI: Early table checksum verification disabled
[ 0.003323] ACPI: RSDP 0x00000000B11FE014 000024 (v02 ALASKA)
[ 0.003327] ACPI: XSDT 0x00000000B11FD728 000174 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003331] ACPI: FACP 0x00000000B11F1000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.003334] ACPI: DSDT 0x00000000B11DE000 012842 (v02 ALASKA A M I 01072009 INTL 20200717)
[ 0.003335] ACPI: FACS 0x00000000B249E000 000040
[ 0.003336] ACPI: MSDM 0x00000000B11FC000 000055 (v03 ALASKA A M I 01072009 ASUS 00000001)
[ 0.003338] ACPI: SSDT 0x00000000B11F3000 008416 (v02 AMD AmdTable 00000002 MSFT 02000002)
[ 0.003339] ACPI: SSDT 0x00000000B11F2000 000221 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.003340] ACPI: FIDT 0x00000000B11DD000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003342] ACPI: ECDT 0x00000000B11DC000 0000C1 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.003343] ACPI: MCFG 0x00000000B11DB000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.003344] ACPI: HPET 0x00000000B11DA000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.003345] ACPI: FPDT 0x00000000B11D9000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003346] ACPI: VFCT 0x00000000B11D4000 004284 (v01 ALASKA A M I 00000001 AMD 33504F47)
[ 0.003348] ACPI: SSDT 0x00000000B11CE000 00547E (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003349] ACPI: CRAT 0x00000000B11CD000 000EE8 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003350] ACPI: CDIT 0x00000000B11CC000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003351] ACPI: TPM2 0x00000000B11CA000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.003352] ACPI: BGRT 0x00000000B11CB000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003353] ACPI: SSDT 0x00000000B11C8000 0015C8 (v02 AMD CPMDFIG2 00000001 INTL 20200717)
[ 0.003355] ACPI: SSDT 0x00000000B11C5000 0028E1 (v02 AMD CDFAAIG2 00000001 INTL 20200717)
[ 0.003356] ACPI: SSDT 0x00000000B11C4000 000024 (v02 AMD CPMDFDG1 00000001 INTL 20200717)
[ 0.003357] ACPI: SSDT 0x00000000B11BE000 0059A9 (v02 AMD CPMD3CLD 00000001 INTL 20200717)
[ 0.003358] ACPI: SSDT 0x00000000B11BD000 000935 (v02 AMD CPMWLRC 00000001 INTL 20200717)
[ 0.003359] ACPI: SSDT 0x00000000B11BC000 0009DC (v02 AMD OEMACP 00000001 INTL 20200717)
[ 0.003360] ACPI: SSDT 0x00000000B11BB000 00063C (v02 AMD OEMPMF 00000001 INTL 20200717)
[ 0.003362] ACPI: SDEV 0x00000000B11BA000 000144 (v01 00000000 AMI 00000000)
[ 0.003363] ACPI: SSDT 0x00000000B11B0000 009894 (v02 AMD CPMCMN 00000001 INTL 20200717)
[ 0.003364] ACPI: WSMT 0x00000000B11AF000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003365] ACPI: APIC 0x00000000B11AE000 0000E8 (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.003366] ACPI: SSDT 0x00000000B11AC000 001D35 (v02 AMD AOD 00000001 INTL 20200717)
[ 0.003367] ACPI: IVRS 0x00000000B11AB000 0001A4 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003369] ACPI: SSDT 0x00000000B11AA000 000956 (v02 AMD CPMMSOSC 00000001 INTL 20200717)
[ 0.003370] ACPI: SSDT 0x00000000B11A9000 000EAD (v02 AMD CPMACPV5 00000001 INTL 20200717)
[ 0.003371] ACPI: SSDT 0x00000000B11A8000 0007DD (v02 AMD THERMAL0 00000001 INTL 20200717)
[ 0.003372] ACPI: SSDT 0x00000000B11A7000 000FF7 (v02 AMD GPP_PME_ 00000001 INTL 20200717)
[ 0.003373] ACPI: SSDT 0x00000000B119D000 0097E3 (v02 AMD INTGPP03 00000001 INTL 20200717)
[ 0.003374] ACPI: SSDT 0x00000000B1198000 004FEB (v02 AMD INTGPP01 00000001 INTL 20200717)
[ 0.003376] ACPI: SSDT 0x00000000B1197000 0009FE (v02 AMD CPMGPIO0 00000001 INTL 20200717)
[ 0.003377] ACPI: SSDT 0x00000000B1196000 00008D (v02 AMD CPMMSLPI 00000001 INTL 20200717)
[ 0.003378] ACPI: SSDT 0x00000000B1195000 000501 (v02 AMD CPMSFAML 00000001 INTL 20200717)
[ 0.003379] ACPI: SSDT 0x00000000B1193000 001156 (v01 AMD CPMUCSI 00000001 INTL 20200717)
[ 0.003380] ACPI: SSDT 0x00000000B1192000 000CE0 (v02 AMD WwanSsdt 00000001 INTL 20200717)
[ 0.003381] ACPI: SSDT 0x00000000B1191000 000747 (v02 AMD NVME 00000001 INTL 20200717)
[ 0.003382] ACPI: SSDT 0x00000000B1190000 000C88 (v02 AMD GpMsSsdt 00000001 INTL 20200717)
[ 0.003384] ACPI: SSDT 0x00000000B118E000 001450 (v02 AMD UPEP 00000001 INTL 20200717)
[ 0.003385] ACPI: Reserving FACP table memory at [mem 0xb11f1000-0xb11f1113]
[ 0.003385] ACPI: Reserving DSDT table memory at [mem 0xb11de000-0xb11f0841]
[ 0.003386] ACPI: Reserving FACS table memory at [mem 0xb249e000-0xb249e03f]
[ 0.003386] ACPI: Reserving MSDM table memory at [mem 0xb11fc000-0xb11fc054]
[ 0.003386] ACPI: Reserving SSDT table memory at [mem 0xb11f3000-0xb11fb415]
[ 0.003387] ACPI: Reserving SSDT table memory at [mem 0xb11f2000-0xb11f2220]
[ 0.003387] ACPI: Reserving FIDT table memory at [mem 0xb11dd000-0xb11dd09b]
[ 0.003387] ACPI: Reserving ECDT table memory at [mem 0xb11dc000-0xb11dc0c0]
[ 0.003388] ACPI: Reserving MCFG table memory at [mem 0xb11db000-0xb11db03b]
[ 0.003388] ACPI: Reserving HPET table memory at [mem 0xb11da000-0xb11da037]
[ 0.003388] ACPI: Reserving FPDT table memory at [mem 0xb11d9000-0xb11d9043]
[ 0.003389] ACPI: Reserving VFCT table memory at [mem 0xb11d4000-0xb11d8283]
[ 0.003389] ACPI: Reserving SSDT table memory at [mem 0xb11ce000-0xb11d347d]
[ 0.003389] ACPI: Reserving CRAT table memory at [mem 0xb11cd000-0xb11cdee7]
[ 0.003390] ACPI: Reserving CDIT table memory at [mem 0xb11cc000-0xb11cc028]
[ 0.003390] ACPI: Reserving TPM2 table memory at [mem 0xb11ca000-0xb11ca04b]
[ 0.003390] ACPI: Reserving BGRT table memory at [mem 0xb11cb000-0xb11cb037]
[ 0.003391] ACPI: Reserving SSDT table memory at [mem 0xb11c8000-0xb11c95c7]
[ 0.003391] ACPI: Reserving SSDT table memory at [mem 0xb11c5000-0xb11c78e0]
[ 0.003391] ACPI: Reserving SSDT table memory at [mem 0xb11c4000-0xb11c4023]
[ 0.003391] ACPI: Reserving SSDT table memory at [mem 0xb11be000-0xb11c39a8]
[ 0.003392] ACPI: Reserving SSDT table memory at [mem 0xb11bd000-0xb11bd934]
[ 0.003392] ACPI: Reserving SSDT table memory at [mem 0xb11bc000-0xb11bc9db]
[ 0.003392] ACPI: Reserving SSDT table memory at [mem 0xb11bb000-0xb11bb63b]
[ 0.003393] ACPI: Reserving SDEV table memory at [mem 0xb11ba000-0xb11ba143]
[ 0.003393] ACPI: Reserving SSDT table memory at [mem 0xb11b0000-0xb11b9893]
[ 0.003393] ACPI: Reserving WSMT table memory at [mem 0xb11af000-0xb11af027]
[ 0.003394] ACPI: Reserving APIC table memory at [mem 0xb11ae000-0xb11ae0e7]
[ 0.003394] ACPI: Reserving SSDT table memory at [mem 0xb11ac000-0xb11add34]
[ 0.003394] ACPI: Reserving IVRS table memory at [mem 0xb11ab000-0xb11ab1a3]
[ 0.003395] ACPI: Reserving SSDT table memory at [mem 0xb11aa000-0xb11aa955]
[ 0.003395] ACPI: Reserving SSDT table memory at [mem 0xb11a9000-0xb11a9eac]
[ 0.003395] ACPI: Reserving SSDT table memory at [mem 0xb11a8000-0xb11a87dc]
[ 0.003396] ACPI: Reserving SSDT table memory at [mem 0xb11a7000-0xb11a7ff6]
[ 0.003396] ACPI: Reserving SSDT table memory at [mem 0xb119d000-0xb11a67e2]
[ 0.003396] ACPI: Reserving SSDT table memory at [mem 0xb1198000-0xb119cfea]
[ 0.003397] ACPI: Reserving SSDT table memory at [mem 0xb1197000-0xb11979fd]
[ 0.003397] ACPI: Reserving SSDT table memory at [mem 0xb1196000-0xb119608c]
[ 0.003397] ACPI: Reserving SSDT table memory at [mem 0xb1195000-0xb1195500]
[ 0.003398] ACPI: Reserving SSDT table memory at [mem 0xb1193000-0xb1194155]
[ 0.003398] ACPI: Reserving SSDT table memory at [mem 0xb1192000-0xb1192cdf]
[ 0.003398] ACPI: Reserving SSDT table memory at [mem 0xb1191000-0xb1191746]
[ 0.003399] ACPI: Reserving SSDT table memory at [mem 0xb1190000-0xb1190c87]
[ 0.003399] ACPI: Reserving SSDT table memory at [mem 0xb118e000-0xb118f44f]
[ 0.003520] No NUMA configuration found
[ 0.003520] Faking a node at [mem 0x0000000000000000-0x000000041e2fffff]
[ 0.003527] NODE_DATA(0) allocated [mem 0x41e2d5280-0x41e2fffff]
[ 0.003924] ACPI: PM-Timer IO Port: 0x808
[ 0.003928] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.003943] IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
[ 0.003949] IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
[ 0.003950] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.003952] ACPI: INT_SRC_OVR (bus 0 bus_irq 1 global_irq 1 low edge)
[ 0.003952] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.003954] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.003955] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.003959] e820: update [mem 0xa8f84000-0xa902cfff] System RAM ==> device reserved
[ 0.003966] CPU topo: Max. logical packages: 1
[ 0.003966] CPU topo: Max. logical nodes: 1
[ 0.003966] CPU topo: Num. nodes per package: 1
[ 0.003968] CPU topo: Max. logical dies: 1
[ 0.003968] CPU topo: Max. dies per package: 1
[ 0.003970] CPU topo: Max. threads per core: 2
[ 0.003970] CPU topo: Num. cores per package: 8
[ 0.003971] CPU topo: Num. threads per package: 16
[ 0.003971] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[ 0.003983] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.003984] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.003984] PM: hibernation: Registered nosave memory: [mem 0x09a7f000-0x09ffffff]
[ 0.003985] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a23bfff]
[ 0.003986] PM: hibernation: Registered nosave memory: [mem 0xa8f84000-0xa902cfff]
[ 0.003987] PM: hibernation: Registered nosave memory: [mem 0xacfce000-0xacfcefff]
[ 0.003987] PM: hibernation: Registered nosave memory: [mem 0xae2ff000-0xbadfefff]
[ 0.003988] PM: hibernation: Registered nosave memory: [mem 0xbbff9000-0xbbffcfff]
[ 0.003989] PM: hibernation: Registered nosave memory: [mem 0xbbfff000-0xffffffff]
[ 0.003990] [gap 0xc0000000-0xfedfffff] available for PCI devices
[ 0.003991] Booting paravirtualized kernel on bare hardware
[ 0.003993] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.004016] Zone ranges:
[ 0.004016] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.004017] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.004018] Normal [mem 0x0000000100000000-0x000000041e2fffff]
[ 0.004019] Device empty
[ 0.004019] Movable zone start for each node
[ 0.004020] Early memory node ranges
[ 0.004021] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.004021] node 0: [mem 0x0000000000100000-0x0000000009a7efff]
[ 0.004022] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.004022] node 0: [mem 0x000000000a23c000-0x00000000ae2fefff]
[ 0.004023] node 0: [mem 0x00000000badff000-0x00000000bbff8fff]
[ 0.004023] node 0: [mem 0x00000000bbffd000-0x00000000bbffefff]
[ 0.004023] node 0: [mem 0x0000000100000000-0x000000041e2fffff]
[ 0.004025] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e2fffff]
[ 0.004029] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.004037] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.004097] On node 0, zone DMA32: 1409 pages in unavailable ranges
[ 0.005694] On node 0, zone DMA32: 60 pages in unavailable ranges
[ 0.005759] On node 0, zone DMA32: 19200 pages in unavailable ranges
[ 0.005760] On node 0, zone DMA32: 4 pages in unavailable ranges
[ 0.013796] On node 0, zone Normal: 16385 pages in unavailable ranges
[ 0.013820] On node 0, zone Normal: 7424 pages in unavailable ranges
[ 0.013835] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.014237] percpu: Embedded 85 pages/cpu s225280 r8192 d114688 u524288
[ 0.014240] pcpu-alloc: s225280 r8192 d114688 u524288 alloc=1*2097152
[ 0.014243] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
[ 0.014245] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
[ 0.014260] Kernel command line: BOOT_IMAGE=/casper/vmlinuz thunderbolt.dyndbg=+p --- quiet splash
[ 0.014312] Unknown kernel command line parameters "--- splash", will be passed to user space.
[ 0.014539] printk: log buffer data + meta data: 262144 + 1114112 = 1376256 bytes
[ 0.015209] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.015550] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.015674] software IO TLB: area num 16.
[ 0.020727] Fallback order for Node 0: 0
[ 0.020734] Built 1 zonelists, mobility grouping on. Total pages: 3985885
[ 0.020735] Policy zone: Normal
[ 0.020745] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.036104] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.046530] ftrace: allocating 63941 entries in 252 pages
[ 0.046531] ftrace: allocated 252 pages with 6 groups
[ 0.046996] Dynamic Preempt: lazy
[ 0.047055] rcu: Preemptible hierarchical RCU implementation.
[ 0.047056] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[ 0.047057] Trampoline variant of Tasks RCU enabled.
[ 0.047057] Rude variant of Tasks RCU enabled.
[ 0.047058] Tracing variant of Tasks RCU enabled.
[ 0.047058] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.047059] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.047068] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[ 0.047070] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[ 0.049717] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
[ 0.049940] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.050108] Console: colour dummy device 80x25
[ 0.050110] printk: legacy console [tty0] enabled
[ 0.050146] ACPI: Core revision 20251212
[ 0.050347] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.050367] APIC: Switch to symmetric I/O mode setup
[ 0.050617] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:0xa0
[ 0.050619] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:0xa0
[ 0.050620] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:0xa0
[ 0.050620] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:0xa0
[ 0.050621] AMD-Vi: Using global IVHD EFR:0x246577efa2254afa, EFR2:0x0
[ 0.051390] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.052444] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057371] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x731aadb4383, max_idle_ns: 881591160298 ns
[ 0.057374] Calibrating delay loop (skipped), value calculated using timer frequency.. 7985.35 BogoMIPS (lpj=3992676)
[ 0.057390] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.057423] LVT offset 1 assigned for vector 0xf9
[ 0.057424] LVT offset 2 assigned for vector 0xf4
[ 0.057596] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[ 0.057596] Last level dTLB entries: 4KB 3072, 2MB 3072, 4MB 1536, 1GB 0
[ 0.057600] process: using mwait in idle threads
[ 0.057602] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.057604] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.057606] Transient Scheduler Attacks: Mitigation: Clear CPU buffers
[ 0.057606] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[ 0.057607] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.057608] Speculative Return Stack Overflow: Mitigation: Safe RET
[ 0.057608] VMSCAPE: Mitigation: IBPB before exit to userspace
[ 0.057608] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.057610] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.057611] active return thunk: srso_alias_return_thunk
[ 0.057619] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.057620] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.057620] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.057621] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.057621] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.057622] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.057622] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.057623] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[ 0.057623] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
[ 0.057624] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.057625] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64
[ 0.057626] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512
[ 0.057626] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[ 0.057627] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8
[ 0.057627] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16
[ 0.057628] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24
[ 0.057629] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
[ 0.085288] Freeing SMP alternatives memory: 56K
[ 0.085292] pid_max: default: 32768 minimum: 301
[ 0.085435] landlock: Up and running.
[ 0.085437] Yama: becoming mindful.
[ 0.085551] AppArmor: AppArmor initialized
[ 0.085552] AppArmor: AppArmor secmark mediation reserved: ready to be enabled
[ 0.085655] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.085667] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.085752] VFS: Finished mounting rootfs on nullfs
[ 0.188574] smpboot: CPU0: AMD Ryzen 9 7940HS w/ Radeon 780M Graphics (family: 0x19, model: 0x74, stepping: 0x1)
[ 0.188785] Performance Events: Fam17h+ 16-deep LBR, core perfctr, AMD PMU driver.
[ 0.188819] ... version: 2
[ 0.188820] ... bit width: 48
[ 0.188821] ... generic counters: 6
[ 0.188822] ... generic bitmap: 000000000000003f
[ 0.188823] ... fixed-purpose counters: 0
[ 0.188824] ... fixed-purpose bitmap: 0000000000000000
[ 0.188825] ... value mask: 0000ffffffffffff
[ 0.188826] ... max period: 00007fffffffffff
[ 0.188827] ... global_ctrl mask: 000000000000003f
[ 0.188934] signal: max sigframe size: 3376
[ 0.189012] rcu: Hierarchical SRCU implementation.
[ 0.189014] rcu: Max phase no-delay instances is 400.
[ 0.189068] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[ 0.194001] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.194161] smp: Bringing up secondary CPUs ...
[ 0.194289] smpboot: x86: Booting SMP configuration:
[ 0.194291] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.206374] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.213412] smp: Brought up 1 node, 16 CPUs
[ 0.213412] smpboot: Total of 16 processors activated (127765.63 BogoMIPS)
[ 0.215482] Memory: 13474116K/15943540K available (23799K kernel code, 4952K rwdata, 16764K rodata, 5292K init, 5856K bss, 2442772K reserved, 0K cma-reserved)
[ 0.215805] devtmpfs: initialized
[ 0.215805] x86/mm: Memory block size: 128MB
[ 0.217972] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a23bfff] (245760 bytes)
[ 0.217972] ACPI: PM: Registering ACPI NVS region [mem 0xb11ff000-0xb66fefff] (89128960 bytes)
[ 0.218663] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.218663] posixtimers hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.218663] futex hash table entries: 4096 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear).
[ 0.218663] PM: RTC time: 10:13:31, date: 2026-09-23
[ 0.218918] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.219428] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.219485] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.219541] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.219548] audit: initializing netlink subsys (disabled)
[ 0.219559] audit: type=2000 audit(1790158411.168:1): state=initialized audit_enabled=0 res=1
[ 0.219559] thermal_sys: Registered thermal governor 'fair_share'
[ 0.219559] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.219559] thermal_sys: Registered thermal governor 'step_wise'
[ 0.219559] thermal_sys: Registered thermal governor 'user_space'
[ 0.219559] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.219559] cpuidle: using governor ladder
[ 0.219559] cpuidle: using governor menu
[ 0.224044] efi: Freeing EFI boot services memory: 115408K
[ 0.224047] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.224049] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.224173] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.224187] PCI: Using configuration type 1 for base access
[ 0.224310] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.224495] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.224495] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.224495] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.224495] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.225802] ACPI: Added _OSI(Module Device)
[ 0.225805] ACPI: Added _OSI(Processor Device)
[ 0.225807] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.254205] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP2.WWAN], AE_NOT_FOUND (20251212/dswload2-162)
[ 0.254213] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20251212/psobject-220)
[ 0.254216] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.254804] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP2.WWAN], AE_NOT_FOUND (20251212/dswload2-162)
[ 0.254809] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20251212/psobject-220)
[ 0.254812] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.254849] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP7.DEV0], AE_NOT_FOUND (20251212/dswload2-162)
[ 0.254853] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20251212/psobject-220)
[ 0.254856] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.255370] ACPI: 27 ACPI AML tables successfully acquired and loaded
[ 0.257274] ACPI: EC: EC started
[ 0.257276] ACPI: EC: interrupt blocked
[ 0.258041] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.258042] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.259295] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.276132] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff]
[ 0.276661] ACPI: \_SB_: platform _OSC: OS control mask [006e7e7f]
[ 0.276984] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.276985] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.277925] ACPI: Interpreter enabled
[ 0.277942] ACPI: PM: (supports S0 S4 S5)
[ 0.277943] ACPI: Using IOAPIC for interrupt routing
[ 0.279805] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.279807] PCI: Ignoring E820 reservations for host bridge windows
[ 0.280319] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.281902] ACPI: \_SB_.PCI0.GPP2.P0WW: New power resource
[ 0.282458] ACPI: \_SB_.PCI0.GPP0.M237: New power resource
[ 0.295231] ACPI: \_SB_.PCI0.GPP0.SWUS.M237: New power resource
[ 0.295331] ACPI: \_SB_.PCI0.GPP0.SWUS.SWDS.M237: New power resource
[ 0.296635] ACPI: \_SB_.PCI0.GPP7.RPR2: New power resource
[ 0.297075] ACPI: \_SB_.PCI0.GPP8.P0NV: New power resource
[ 0.298544] ACPI: \_SB_.PCI0.GP11.PWRS: New power resource
[ 0.299369] ACPI: \_SB_.PCI0.GP11.SWUS.PWRS: New power resource
[ 0.301072] ACPI: \_SB_.PCI0.GP12.PWRS: New power resource
[ 0.302726] ACPI: \_SB_.PCI0.GP12.SWUS.PWRS: New power resource
[ 0.303016] ACPI: \_SB_.PCI0.GP17.PWRS: New power resource
[ 0.303317] ACPI: \_SB_.PCI0.GP17.VGA_.PWRS: New power resource
[ 0.303688] ACPI: \_SB_.PCI0.GP17.HDAU.PWRS: New power resource
[ 0.303999] ACPI: \_SB_.PCI0.GP17.ACP_.PWRS: New power resource
[ 0.304710] ACPI: \_SB_.PCI0.GP17.AZAL.PWRS: New power resource
[ 0.305447] ACPI: \_SB_.PCI0.GP17.XHC0.PWRS: New power resource
[ 0.306126] ACPI: \_SB_.PCI0.GP17.XHC0.RHUB.PRT4.BTPR: New power resource
[ 0.306760] ACPI: \_SB_.PCI0.GP17.XHC1.PWRS: New power resource
[ 0.308036] ACPI: \_SB_.PCI0.GP19.XHC2.PWRS: New power resource
[ 0.309058] ACPI: \_SB_.PCI0.GP19.XHC3.PWRS: New power resource
[ 0.310228] ACPI: \_SB_.PCI0.GP19.XHC4.PWRS: New power resource
[ 0.311400] ACPI: \_SB_.PCI0.GP19.NHI0.PWRS: New power resource
[ 0.312155] ACPI: \_SB_.PCI0.GP19.NHI1.PWRS: New power resource
[ 0.321500] ACPI: \_SB_.PRWL: New power resource
[ 0.323156] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.323162] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.323355] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.323357] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.324090] PCI host bridge to bus 0000:00
[ 0.324093] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.324096] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.324097] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.324099] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.324101] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfcffffff window]
[ 0.324102] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xf9ffffff window]
[ 0.324104] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.324105] pci_bus 0000:00: root bus resource [mem 0x440000000-0x7fffffffff window]
[ 0.324107] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.324139] pci 0000:00:00.0: [1022:14e8] type 00 class 0x060000 conventional PCI endpoint
[ 0.324357] pci 0000:00:00.2: [1022:14e9] type 00 class 0x080600 conventional PCI endpoint
[ 0.324553] pci 0000:00:01.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.324713] pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port
[ 0.324750] pci 0000:00:01.1: PCI bridge to [bus 01-05]
[ 0.324760] pci 0000:00:01.1: bridge window [io 0xf000-0xffff]
[ 0.324766] pci 0000:00:01.1: bridge window [mem 0xdc000000-0xdd0fffff]
[ 0.324780] pci 0000:00:01.1: bridge window [mem 0x6000000000-0x6801ffffff 64bit pref]
[ 0.324909] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.325649] pci 0000:00:02.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.325810] pci 0000:00:02.2: [1022:14ee] type 01 class 0x060400 PCIe Root Port
[ 0.325847] pci 0000:00:02.2: PCI bridge to [bus 06]
[ 0.325859] pci 0000:00:02.2: bridge window [mem 0xdda00000-0xddbfffff]
[ 0.325889] pci 0000:00:02.2: enabling Extended Tags
[ 0.326014] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.326307] pci 0000:00:02.3: [1022:14ee] type 01 class 0x060400 PCIe Root Port
[ 0.326349] pci 0000:00:02.3: PCI bridge to [bus 07]
[ 0.326362] pci 0000:00:02.3: bridge window [mem 0xde100000-0xde1fffff]
[ 0.326521] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.326818] pci 0000:00:02.4: [1022:14ee] type 01 class 0x060400 PCIe Root Port
[ 0.326860] pci 0000:00:02.4: PCI bridge to [bus 08]
[ 0.326873] pci 0000:00:02.4: bridge window [mem 0xde000000-0xde0fffff]
[ 0.326906] pci 0000:00:02.4: enabling Extended Tags
[ 0.327029] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.327279] pci 0000:00:03.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.327420] pci 0000:00:04.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.327583] pci 0000:00:04.1: [1022:14ef] type 01 class 0x060400 PCIe Root Port
[ 0.327626] pci 0000:00:04.1: PCI bridge to [bus 09-68]
[ 0.327638] pci 0000:00:04.1: bridge window [io 0xa000-0xdfff]
[ 0.327643] pci 0000:00:04.1: bridge window [mem 0xc4000000-0xdbffffff]
[ 0.327663] pci 0000:00:04.1: bridge window [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.327687] pci 0000:00:04.1: enabling Extended Tags
[ 0.328061] pci 0000:00:04.1: PME# supported from D0 D3hot D3cold
[ 0.329809] pci 0000:00:08.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.329958] pci 0000:00:08.1: [1022:14eb] type 01 class 0x060400 PCIe Root Port
[ 0.329973] pci 0000:00:08.1: PCI bridge to [bus 69]
[ 0.329978] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.329982] pci 0000:00:08.1: bridge window [mem 0xdd200000-0xdd8fffff]
[ 0.329989] pci 0000:00:08.1: bridge window [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.329995] pci 0000:00:08.1: enabling Extended Tags
[ 0.330038] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.330368] pci 0000:00:08.2: [1022:14eb] type 01 class 0x060400 PCIe Root Port
[ 0.330409] pci 0000:00:08.2: PCI bridge to [bus 6a]
[ 0.330414] pci 0000:00:08.2: bridge window [mem 0xddf00000-0xddffffff]
[ 0.330421] pci 0000:00:08.2: bridge window [mem 0x7c10900000-0x7c109fffff 64bit pref]
[ 0.330428] pci 0000:00:08.2: enabling Extended Tags
[ 0.330471] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[ 0.330610] pci 0000:00:08.3: [1022:14eb] type 01 class 0x060400 PCIe Root Port
[ 0.330626] pci 0000:00:08.3: PCI bridge to [bus 6b]
[ 0.330632] pci 0000:00:08.3: bridge window [mem 0xddc00000-0xddefffff]
[ 0.330644] pci 0000:00:08.3: enabling Extended Tags
[ 0.330687] pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
[ 0.331023] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.331162] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[ 0.331305] pci 0000:00:18.0: [1022:14f0] type 00 class 0x060000 conventional PCI endpoint
[ 0.331344] pci 0000:00:18.1: [1022:14f1] type 00 class 0x060000 conventional PCI endpoint
[ 0.331385] pci 0000:00:18.2: [1022:14f2] type 00 class 0x060000 conventional PCI endpoint
[ 0.331424] pci 0000:00:18.3: [1022:14f3] type 00 class 0x060000 conventional PCI endpoint
[ 0.331462] pci 0000:00:18.4: [1022:14f4] type 00 class 0x060000 conventional PCI endpoint
[ 0.331499] pci 0000:00:18.5: [1022:14f5] type 00 class 0x060000 conventional PCI endpoint
[ 0.331538] pci 0000:00:18.6: [1022:14f6] type 00 class 0x060000 conventional PCI endpoint
[ 0.331577] pci 0000:00:18.7: [1022:14f7] type 00 class 0x060000 conventional PCI endpoint
[ 0.332173] pci 0000:01:00.0: [10de:28e0] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.332199] pci 0000:01:00.0: BAR 0 [mem 0xdc000000-0xdcffffff]
[ 0.332204] pci 0000:01:00.0: BAR 1 [mem 0x6000000000-0x61ffffffff 64bit pref]
[ 0.332208] pci 0000:01:00.0: BAR 3 [mem 0x6200000000-0x6201ffffff 64bit pref]
[ 0.332210] pci 0000:01:00.0: BAR 5 [io 0xf000-0xf07f]
[ 0.332214] pci 0000:01:00.0: ROM [mem 0xdd000000-0xdd07ffff pref]
[ 0.332268] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.333670] pci 0000:01:00.1: [10de:22be] type 00 class 0x040300 PCIe Endpoint
[ 0.333696] pci 0000:01:00.1: BAR 0 [mem 0xdd080000-0xdd083fff]
[ 0.333851] pci 0000:00:01.1: PCI bridge to [bus 01-05]
[ 0.333995] pci 0000:06:00.0: [17cb:1107] type 00 class 0x028000 PCIe Endpoint
[ 0.334042] pci 0000:06:00.0: BAR 0 [mem 0xdda00000-0xddbfffff 64bit]
[ 0.334140] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.334247] pci 0000:06:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:02.2 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[ 0.334422] pci 0000:00:02.2: PCI bridge to [bus 06]
[ 0.334647] pci 0000:07:00.0: [17a0:9755] type 00 class 0x080501 PCIe Endpoint
[ 0.334720] pci 0000:07:00.0: BAR 0 [mem 0xde100000-0xde100fff]
[ 0.334908] pci 0000:07:00.0: supports D1 D2
[ 0.334909] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.335338] pci 0000:00:02.3: PCI bridge to [bus 07]
[ 0.335695] pci 0000:08:00.0: [15b7:5015] type 00 class 0x010802 PCIe Endpoint
[ 0.335732] pci 0000:08:00.0: BAR 0 [mem 0xde000000-0xde003fff 64bit]
[ 0.336035] pci 0000:00:02.4: PCI bridge to [bus 08]
[ 0.336129] pci 0000:00:04.1: PCI bridge to [bus 09-68]
[ 0.336257] pci 0000:69:00.0: [1002:15bf] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.336286] pci 0000:69:00.0: BAR 0 [mem 0x7c00000000-0x7c0fffffff 64bit pref]
[ 0.336290] pci 0000:69:00.0: BAR 2 [mem 0xdd200000-0xdd3fffff 64bit pref]
[ 0.336293] pci 0000:69:00.0: BAR 4 [io 0xe000-0xe0ff]
[ 0.336295] pci 0000:69:00.0: BAR 5 [mem 0xdd800000-0xdd87ffff]
[ 0.336302] pci 0000:69:00.0: enabling Extended Tags
[ 0.336381] pci 0000:69:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.336727] pci 0000:69:00.1: [1002:1640] type 00 class 0x040300 PCIe Legacy Endpoint
[ 0.336753] pci 0000:69:00.1: BAR 0 [mem 0xdd8c8000-0xdd8cbfff]
[ 0.336763] pci 0000:69:00.1: enabling Extended Tags
[ 0.336803] pci 0000:69:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.337100] pci 0000:69:00.2: [1022:15c7] type 00 class 0x108000 PCIe Endpoint
[ 0.337127] pci 0000:69:00.2: BAR 2 [mem 0xdd700000-0xdd7fffff]
[ 0.337131] pci 0000:69:00.2: BAR 5 [mem 0xdd8ce000-0xdd8cffff]
[ 0.337139] pci 0000:69:00.2: enabling Extended Tags
[ 0.337292] pci 0000:69:00.3: [1022:15b9] type 00 class 0x0c0330 PCIe Endpoint
[ 0.337321] pci 0000:69:00.3: BAR 0 [mem 0xdd600000-0xdd6fffff 64bit]
[ 0.337330] pci 0000:69:00.3: enabling Extended Tags
[ 0.337374] pci 0000:69:00.3: PME# supported from D0 D3hot D3cold
[ 0.337675] pci 0000:69:00.4: [1022:15ba] type 00 class 0x0c0330 PCIe Endpoint
[ 0.337704] pci 0000:69:00.4: BAR 0 [mem 0xdd500000-0xdd5fffff 64bit]
[ 0.337714] pci 0000:69:00.4: enabling Extended Tags
[ 0.337765] pci 0000:69:00.4: PME# supported from D0 D3hot D3cold
[ 0.338051] pci 0000:69:00.5: [1022:15e2] type 00 class 0x048000 PCIe Endpoint
[ 0.338078] pci 0000:69:00.5: BAR 0 [mem 0xdd880000-0xdd8bffff]
[ 0.338082] pci 0000:69:00.5: BAR 2 [mem 0x7c10000000-0x7c107fffff 64bit pref]
[ 0.338091] pci 0000:69:00.5: enabling Extended Tags
[ 0.338131] pci 0000:69:00.5: PME# supported from D0 D3hot D3cold
[ 0.338426] pci 0000:69:00.6: [1022:15e3] type 00 class 0x040300 PCIe Endpoint
[ 0.338455] pci 0000:69:00.6: BAR 0 [mem 0xdd8c0000-0xdd8c7fff]
[ 0.338466] pci 0000:69:00.6: enabling Extended Tags
[ 0.338507] pci 0000:69:00.6: PME# supported from D0 D3hot D3cold
[ 0.338793] pci 0000:69:00.7: [1022:164a] type 00 class 0x118000 PCIe Endpoint
[ 0.338821] pci 0000:69:00.7: BAR 2 [mem 0xdd400000-0xdd4fffff]
[ 0.338826] pci 0000:69:00.7: BAR 5 [mem 0xdd8cc000-0xdd8cdfff]
[ 0.338833] pci 0000:69:00.7: enabling Extended Tags
[ 0.338997] pci 0000:00:08.1: PCI bridge to [bus 69]
[ 0.339074] pci 0000:6a:00.0: [1022:14ec] type 00 class 0x130000 PCIe Endpoint
[ 0.339108] pci 0000:6a:00.0: enabling Extended Tags
[ 0.339162] pci 0000:6a:00.0: PME# supported from D3hot D3cold
[ 0.339289] pci 0000:6a:00.1: [1022:1502] type 00 class 0x118000 PCIe Endpoint
[ 0.339324] pci 0000:6a:00.1: BAR 0 [mem 0xddf00000-0xddf7ffff]
[ 0.339328] pci 0000:6a:00.1: BAR 1 [mem 0xddfc0000-0xddfc1fff]
[ 0.339333] pci 0000:6a:00.1: BAR 2 [mem 0x7c10900000-0x7c1093ffff 64bit pref]
[ 0.339335] pci 0000:6a:00.1: BAR 4 [mem 0xddf80000-0xddfbffff]
[ 0.339343] pci 0000:6a:00.1: enabling Extended Tags
[ 0.339546] pci 0000:00:08.2: PCI bridge to [bus 6a]
[ 0.339673] pci 0000:6b:00.0: [1022:14ec] type 00 class 0x130000 PCIe Endpoint
[ 0.339707] pci 0000:6b:00.0: enabling Extended Tags
[ 0.340294] pci 0000:6b:00.3: [1022:15c0] type 00 class 0x0c0330 PCIe Endpoint
[ 0.340324] pci 0000:6b:00.3: BAR 0 [mem 0xddd00000-0xdddfffff 64bit]
[ 0.340333] pci 0000:6b:00.3: enabling Extended Tags
[ 0.340383] pci 0000:6b:00.3: PME# supported from D0 D3hot D3cold
[ 0.340924] pci 0000:6b:00.4: [1022:15c1] type 00 class 0x0c0330 PCIe Endpoint
[ 0.340953] pci 0000:6b:00.4: BAR 0 [mem 0xddc00000-0xddcfffff 64bit]
[ 0.340964] pci 0000:6b:00.4: enabling Extended Tags
[ 0.341007] pci 0000:6b:00.4: PME# supported from D0 D3hot D3cold
[ 0.341539] pci 0000:6b:00.6: [1022:1669] type 00 class 0x0c0340 PCIe Endpoint
[ 0.341573] pci 0000:6b:00.6: BAR 0 [mem 0xdde00000-0xdde7ffff 64bit]
[ 0.341584] pci 0000:6b:00.6: enabling Extended Tags
[ 0.341628] pci 0000:6b:00.6: PME# supported from D0 D3hot D3cold
[ 0.342134] pci 0000:00:08.3: PCI bridge to [bus 6b]
[ 0.354421] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.354517] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.354614] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.354723] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.354827] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.354899] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.354984] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.355057] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.357635] Low-power S0 idle used by default for system suspend
[ 0.358182] ACPI: EC: interrupt unblocked
[ 0.358184] ACPI: EC: event unblocked
[ 0.358191] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.358193] ACPI: EC: GPE=0x10
[ 0.358194] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot ECDT EC initialization complete
[ 0.358196] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
[ 0.358251] iommu: Default domain type: Translated
[ 0.358251] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.358528] SCSI subsystem initialized
[ 0.358533] libata version 3.00 loaded.
[ 0.358533] ACPI: bus type USB registered
[ 0.358533] usbcore: registered new interface driver usbfs
[ 0.358533] usbcore: registered new interface driver hub
[ 0.358533] usbcore: registered new device driver usb
[ 0.416693] pps_core: LinuxPPS API ver. 1 registered
[ 0.416695] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.416699] PTP clock support registered
[ 0.416721] EDAC MC: Ver: 3.0.0
[ 0.416774] efivars: Registered efivars operations
[ 0.417578] NetLabel: Initializing
[ 0.417579] NetLabel: domain hash size = 128
[ 0.417581] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.417596] NetLabel: unlabeled traffic allowed by default
[ 0.417610] mctp: management component transport protocol core
[ 0.417610] NET: Registered PF_MCTP protocol family
[ 0.417610] PCI: Using ACPI for IRQ routing
[ 0.426511] PCI: pci_cache_line_size set to 64 bytes
[ 0.426877] e820: register RAM buffer resource [mem 0x09a7f000-0x0bffffff]
[ 0.426879] e820: register RAM buffer resource [mem 0x0a200000-0x0bffffff]
[ 0.426881] e820: register RAM buffer resource [mem 0xa8f84000-0xabffffff]
[ 0.426882] e820: register RAM buffer resource [mem 0xacfce000-0xafffffff]
[ 0.426883] e820: register RAM buffer resource [mem 0xae2ff000-0xafffffff]
[ 0.426884] e820: register RAM buffer resource [mem 0xbbff9000-0xbbffffff]
[ 0.426885] e820: register RAM buffer resource [mem 0xbbfff000-0xbbffffff]
[ 0.426886] e820: register RAM buffer resource [mem 0x41e300000-0x41fffffff]
[ 0.426938] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.426938] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.426938] pci 0000:69:00.0: vgaarb: setting as boot VGA device
[ 0.426938] pci 0000:69:00.0: vgaarb: bridge control possible
[ 0.426938] pci 0000:69:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.426938] vgaarb: loaded
[ 0.426938] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.426938] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.431038] clocksource: Switched to clocksource tsc-early
[ 0.431239] VFS: Disk quotas dquot_6.6.0
[ 0.431253] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.431269] AppArmor: AppArmor Filesystem Enabled
[ 0.431269] acpi PNP0C01:00: Reserved [mem 0xe0000000-0xefffffff]
[ 0.431269] acpi PNP0C02:00: Reserved [mem 0xfd300000-0xfd3fffff]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0010-0x001f]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0022-0x003f]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0063]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0065]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0067-0x006f]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0072-0x007f]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0080]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0084-0x0086]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0088]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x008c-0x008e]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0090-0x009f]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x00a2-0x00bf]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x00b1]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x00e0-0x00ef]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x04d0-0x04d1]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x040b]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x04d6]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0c00-0x0c01]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0c14]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0c50-0x0c51]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0c52]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0c6c]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0c6f]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0cd0-0x0cd1]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0cd2-0x0cd3]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0cd4-0x0cd5]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0cd6-0x0cd7]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0cd8-0x0cdf]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0800-0x089f]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0b00-0x0b0f]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0b20-0x0b3f]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0900-0x090f]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0910-0x091f]
[ 0.431269] acpi PNP0C02:01: Could not reserve [mem 0xfec00000-0xfec00fff]
[ 0.431269] acpi PNP0C02:01: Could not reserve [mem 0xfec01000-0xfec01fff]
[ 0.431269] acpi PNP0C02:01: Reserved [mem 0xfedc0000-0xfedc0fff]
[ 0.431269] acpi PNP0C02:01: Reserved [mem 0xfee00000-0xfee00fff]
[ 0.431269] acpi PNP0C02:01: Could not reserve [mem 0xfed80000-0xfed8ffff]
[ 0.431269] acpi PNP0C02:01: Reserved [mem 0xfec10000-0xfec10fff]
[ 0.431269] acpi PNP0C02:01: Reserved [mem 0xff000000-0xffffffff]
[ 0.431269] pnp: PnP ACPI init
[ 0.439184] pnp: PnP ACPI: found 1 devices
[ 0.445414] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.445577] NET: Registered PF_INET protocol family
[ 0.445725] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.458196] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.458207] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.458228] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.458315] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.458369] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.458448] MPTCP token hash table entries: 16384 (order: 7, 393216 bytes, linear)
[ 0.458489] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.458531] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.458603] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.458617] NET: Registered PF_XDP protocol family
[ 0.458645] pci 0000:00:01.1: PCI bridge to [bus 01-05]
[ 0.458659] pci 0000:00:01.1: bridge window [io 0xf000-0xffff]
[ 0.458665] pci 0000:00:01.1: bridge window [mem 0xdc000000-0xdd0fffff]
[ 0.458670] pci 0000:00:01.1: bridge window [mem 0x6000000000-0x6801ffffff 64bit pref]
[ 0.458677] pci 0000:00:02.2: PCI bridge to [bus 06]
[ 0.458683] pci 0000:00:02.2: bridge window [mem 0xdda00000-0xddbfffff]
[ 0.458695] pci 0000:00:02.3: PCI bridge to [bus 07]
[ 0.458701] pci 0000:00:02.3: bridge window [mem 0xde100000-0xde1fffff]
[ 0.458713] pci 0000:00:02.4: PCI bridge to [bus 08]
[ 0.458719] pci 0000:00:02.4: bridge window [mem 0xde000000-0xde0fffff]
[ 0.458731] pci 0000:00:04.1: PCI bridge to [bus 09-68]
[ 0.458735] pci 0000:00:04.1: bridge window [io 0xa000-0xdfff]
[ 0.458743] pci 0000:00:04.1: bridge window [mem 0xc4000000-0xdbffffff]
[ 0.458750] pci 0000:00:04.1: bridge window [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.458760] pci 0000:00:08.1: PCI bridge to [bus 69]
[ 0.458762] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.458768] pci 0000:00:08.1: bridge window [mem 0xdd200000-0xdd8fffff]
[ 0.458771] pci 0000:00:08.1: bridge window [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.458776] pci 0000:00:08.2: PCI bridge to [bus 6a]
[ 0.458780] pci 0000:00:08.2: bridge window [mem 0xddf00000-0xddffffff]
[ 0.458783] pci 0000:00:08.2: bridge window [mem 0x7c10900000-0x7c109fffff 64bit pref]
[ 0.458788] pci 0000:00:08.3: PCI bridge to [bus 6b]
[ 0.458793] pci 0000:00:08.3: bridge window [mem 0xddc00000-0xddefffff]
[ 0.458801] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.458803] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.458804] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff window]
[ 0.458806] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.458807] pci_bus 0000:00: resource 8 [mem 0xfa000000-0xfcffffff window]
[ 0.458809] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xf9ffffff window]
[ 0.458811] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff window]
[ 0.458812] pci_bus 0000:00: resource 11 [mem 0x440000000-0x7fffffffff window]
[ 0.458814] pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
[ 0.458816] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdd0fffff]
[ 0.458817] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x6801ffffff 64bit pref]
[ 0.458819] pci_bus 0000:06: resource 1 [mem 0xdda00000-0xddbfffff]
[ 0.458821] pci_bus 0000:07: resource 1 [mem 0xde100000-0xde1fffff]
[ 0.458822] pci_bus 0000:08: resource 1 [mem 0xde000000-0xde0fffff]
[ 0.458824] pci_bus 0000:09: resource 0 [io 0xa000-0xdfff]
[ 0.458826] pci_bus 0000:09: resource 1 [mem 0xc4000000-0xdbffffff]
[ 0.458827] pci_bus 0000:09: resource 2 [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.458829] pci_bus 0000:69: resource 0 [io 0xe000-0xefff]
[ 0.458831] pci_bus 0000:69: resource 1 [mem 0xdd200000-0xdd8fffff]
[ 0.458832] pci_bus 0000:69: resource 2 [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.458834] pci_bus 0000:6a: resource 1 [mem 0xddf00000-0xddffffff]
[ 0.458835] pci_bus 0000:6a: resource 2 [mem 0x7c10900000-0x7c109fffff 64bit pref]
[ 0.458837] pci_bus 0000:6b: resource 1 [mem 0xddc00000-0xddefffff]
[ 0.459019] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.459059] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.459358] pci 0000:69:00.1: D0 power state depends on 0000:69:00.0
[ 0.459428] pci 0000:00:08.1: can't derive routing for PCI INT A
[ 0.459430] pci 0000:00:08.1: PCI INT A: not connected
[ 0.459766] pci 0000:00:08.3: can't derive routing for PCI INT A
[ 0.459768] pci 0000:00:08.3: PCI INT A: not connected
[ 0.460005] PCI: CLS 64 bytes, default 64
[ 0.460048] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.460115] Trying to unpack rootfs image as initramfs...
[ 0.460167] pci 0000:00:01.0: Adding to iommu group 0
[ 0.460195] pci 0000:00:01.1: Adding to iommu group 1
[ 0.460272] pci 0000:00:02.0: Adding to iommu group 2
[ 0.460307] pci 0000:00:02.2: Adding to iommu group 3
[ 0.460343] pci 0000:00:02.3: Adding to iommu group 4
[ 0.460379] pci 0000:00:02.4: Adding to iommu group 5
[ 0.460400] pci 0000:00:03.0: Adding to iommu group 6
[ 0.460427] pci 0000:00:04.0: Adding to iommu group 7
[ 0.460440] pci 0000:00:04.1: Adding to iommu group 7
[ 0.460499] pci 0000:00:08.0: Adding to iommu group 8
[ 0.460531] pci 0000:00:08.1: Adding to iommu group 9
[ 0.460573] pci 0000:00:08.2: Adding to iommu group 10
[ 0.460612] pci 0000:00:08.3: Adding to iommu group 11
[ 0.460640] pci 0000:00:14.0: Adding to iommu group 12
[ 0.460654] pci 0000:00:14.3: Adding to iommu group 12
[ 0.460721] pci 0000:00:18.0: Adding to iommu group 13
[ 0.460736] pci 0000:00:18.1: Adding to iommu group 13
[ 0.460750] pci 0000:00:18.2: Adding to iommu group 13
[ 0.460765] pci 0000:00:18.3: Adding to iommu group 13
[ 0.460780] pci 0000:00:18.4: Adding to iommu group 13
[ 0.460795] pci 0000:00:18.5: Adding to iommu group 13
[ 0.460809] pci 0000:00:18.6: Adding to iommu group 13
[ 0.460824] pci 0000:00:18.7: Adding to iommu group 13
[ 0.460859] pci 0000:01:00.0: Adding to iommu group 14
[ 0.460883] pci 0000:01:00.1: Adding to iommu group 14
[ 0.460906] pci 0000:06:00.0: Adding to iommu group 15
[ 0.460930] pci 0000:07:00.0: Adding to iommu group 16
[ 0.460956] pci 0000:08:00.0: Adding to iommu group 17
[ 0.461011] pci 0000:69:00.0: Adding to iommu group 18
[ 0.461056] pci 0000:69:00.1: Adding to iommu group 19
[ 0.461124] pci 0000:69:00.2: Adding to iommu group 20
[ 0.461182] pci 0000:69:00.3: Adding to iommu group 21
[ 0.461233] pci 0000:69:00.4: Adding to iommu group 22
[ 0.461266] pci 0000:69:00.5: Adding to iommu group 23
[ 0.461321] pci 0000:69:00.6: Adding to iommu group 24
[ 0.461379] pci 0000:69:00.7: Adding to iommu group 25
[ 0.461428] pci 0000:6a:00.0: Adding to iommu group 26
[ 0.461477] pci 0000:6a:00.1: Adding to iommu group 27
[ 0.461502] pci 0000:6b:00.0: Adding to iommu group 28
[ 0.461539] pci 0000:6b:00.3: Adding to iommu group 29
[ 0.461577] pci 0000:6b:00.4: Adding to iommu group 30
[ 0.461605] pci 0000:6b:00.6: Adding to iommu group 31
[ 0.464250] AMD-Vi: Extended features (0x246577efa2254afa, 0x0): PPR NX GT [5] IA GA PC GA_vAPIC
[ 0.464262] AMD-Vi: Interrupt remapping enabled
[ 0.464526] AMD-Vi: Virtual APIC enabled
[ 0.464573] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.464575] software IO TLB: mapped [mem 0x00000000a38f4000-0x00000000a78f4000] (64MB)
[ 0.464622] LVT offset 0 assigned for vector 0x400
[ 0.467751] perf: AMD IBS detected (0x00000bff)
[ 0.467771] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.469077] Initialise system trusted keyrings
[ 0.469094] Key type blacklist registered
[ 0.469143] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.469544] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.469656] fuse: init (API version 7.45)
[ 0.469812] integrity: Platform Keyring initialized
[ 0.469815] integrity: Machine keyring initialized
[ 0.477187] Key type asymmetric registered
[ 0.477190] Asymmetric key parser 'x509' registered
[ 0.477219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.477277] io scheduler mq-deadline registered
[ 0.479714] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.479923] pcieport 0000:00:01.1: PME: Signaling with IRQ 31
[ 0.479991] pcieport 0000:00:01.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.480318] pcieport 0000:00:02.2: PME: Signaling with IRQ 32
[ 0.480564] pcieport 0000:00:02.3: PME: Signaling with IRQ 33
[ 0.480813] pcieport 0000:00:02.4: PME: Signaling with IRQ 34
[ 0.481107] pcieport 0000:00:04.1: PME: Signaling with IRQ 35
[ 0.481192] pcieport 0000:00:04.1: AER: enabled with IRQ 35
[ 0.481235] pcieport 0000:00:04.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.481799] pcieport 0000:00:08.1: PME: Signaling with IRQ 36
[ 0.482003] pcieport 0000:00:08.2: can't derive routing for PCI INT A
[ 0.482004] pcieport 0000:00:08.2: PCI INT A: not connected
[ 0.482092] pcieport 0000:00:08.2: PME: Signaling with IRQ 37
[ 0.482255] pcieport 0000:00:08.3: PME: Signaling with IRQ 38
[ 0.483545] ACPI: AC: AC Adapter [AC0] (on-line)
[ 0.483607] input: Lid Switch as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/PNP0C0D:00/input/input0
[ 0.483625] ACPI: button: Lid Switch [LID]
[ 0.483664] input: Power Button as /devices/platform/PNP0C0C:00/input/input1
[ 0.483682] ACPI: button: Power Button [PWRB]
[ 0.483720] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input2
[ 0.483737] ACPI: button: Sleep Button [SLPB]
[ 0.483773] Monitor-Mwait will be used to enter C-1 state
[ 0.488294] Estimated ratio of average max frequency by base frequency (times 1024): 1185
[ 0.489304] acpi LNXTHERM:00: registered as thermal_zone0
[ 0.489307] ACPI: thermal: Thermal Zone [THRM] (69 C)
[ 0.489441] acpi LNXTHERM:01: registered as thermal_zone1
[ 0.489442] ACPI: thermal: Thermal Zone [TZ01] (20 C)
[ 0.489731] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.494471] ACPI: battery: Slot [BAT0] (battery present)
[ 0.512443] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.514943] Linux agpgart interface v0.103
[ 0.523158] tpm_crb MSFT0101:00: Disabling hwrng
[ 0.528913] loop: module loaded
[ 0.529227] ACPI: bus type drm_connector registered
[ 0.529512] tun: Universal TUN/TAP device driver, 1.6
[ 0.529559] PPP generic driver version 2.4.2
[ 0.529829] xhci_hcd 0000:69:00.3: xHCI Host Controller
[ 0.529836] xhci_hcd 0000:69:00.3: new USB bus registered, assigned bus number 1
[ 0.530256] xhci_hcd 0000:69:00.3: hcc params 0x0128ffc5 hci version 0x120 quirks 0x0000000200000010
[ 0.530543] xhci_hcd 0000:69:00.3: xHCI Host Controller
[ 0.530545] xhci_hcd 0000:69:00.3: new USB bus registered, assigned bus number 2
[ 0.530548] xhci_hcd 0000:69:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.530594] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00
[ 0.530597] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.530599] usb usb1: Product: xHCI Host Controller
[ 0.530601] usb usb1: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.530603] usb usb1: SerialNumber: 0000:69:00.3
[ 0.530705] hub 1-0:1.0: USB hub found
[ 0.530734] hub 1-0:1.0: 5 ports detected
[ 0.531404] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.531430] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00
[ 0.531432] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.531433] usb usb2: Product: xHCI Host Controller
[ 0.531435] usb usb2: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.531436] usb usb2: SerialNumber: 0000:69:00.3
[ 0.531516] hub 2-0:1.0: USB hub found
[ 0.531551] hub 2-0:1.0: 2 ports detected
[ 0.531993] xhci_hcd 0000:69:00.4: xHCI Host Controller
[ 0.532001] xhci_hcd 0000:69:00.4: new USB bus registered, assigned bus number 3
[ 0.532479] xhci_hcd 0000:69:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 0.532727] xhci_hcd 0000:69:00.4: xHCI Host Controller
[ 0.532730] xhci_hcd 0000:69:00.4: new USB bus registered, assigned bus number 4
[ 0.532732] xhci_hcd 0000:69:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.532780] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00
[ 0.532782] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.532783] usb usb3: Product: xHCI Host Controller
[ 0.532785] usb usb3: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.532786] usb usb3: SerialNumber: 0000:69:00.4
[ 0.532870] hub 3-0:1.0: USB hub found
[ 0.532881] hub 3-0:1.0: 1 port detected
[ 0.533087] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.533110] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00
[ 0.533112] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.533113] usb usb4: Product: xHCI Host Controller
[ 0.533115] usb usb4: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.533116] usb usb4: SerialNumber: 0000:69:00.4
[ 0.533194] hub 4-0:1.0: USB hub found
[ 0.533223] hub 4-0:1.0: 1 port detected
[ 0.533527] xhci_hcd 0000:6b:00.3: xHCI Host Controller
[ 0.533531] xhci_hcd 0000:6b:00.3: new USB bus registered, assigned bus number 5
[ 0.533880] xhci_hcd 0000:6b:00.3: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 0.534312] xhci_hcd 0000:6b:00.3: xHCI Host Controller
[ 0.534319] xhci_hcd 0000:6b:00.3: new USB bus registered, assigned bus number 6
[ 0.534321] xhci_hcd 0000:6b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.534365] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00
[ 0.534367] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.534368] usb usb5: Product: xHCI Host Controller
[ 0.534370] usb usb5: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.534371] usb usb5: SerialNumber: 0000:6b:00.3
[ 0.534451] hub 5-0:1.0: USB hub found
[ 0.534462] hub 5-0:1.0: 1 port detected
[ 0.534651] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.534674] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00
[ 0.534676] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.534678] usb usb6: Product: xHCI Host Controller
[ 0.534679] usb usb6: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.534681] usb usb6: SerialNumber: 0000:6b:00.3
[ 0.534761] hub 6-0:1.0: USB hub found
[ 0.534791] hub 6-0:1.0: 1 port detected
[ 0.535419] xhci_hcd 0000:6b:00.4: xHCI Host Controller
[ 0.535424] xhci_hcd 0000:6b:00.4: new USB bus registered, assigned bus number 7
[ 0.535811] xhci_hcd 0000:6b:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 0.536251] xhci_hcd 0000:6b:00.4: xHCI Host Controller
[ 0.536253] xhci_hcd 0000:6b:00.4: new USB bus registered, assigned bus number 8
[ 0.536255] xhci_hcd 0000:6b:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.536299] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00
[ 0.536301] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536302] usb usb7: Product: xHCI Host Controller
[ 0.536304] usb usb7: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.536305] usb usb7: SerialNumber: 0000:6b:00.4
[ 0.536387] hub 7-0:1.0: USB hub found
[ 0.536399] hub 7-0:1.0: 1 port detected
[ 0.536595] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.536619] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00
[ 0.536621] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536623] usb usb8: Product: xHCI Host Controller
[ 0.536624] usb usb8: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.536626] usb usb8: SerialNumber: 0000:6b:00.4
[ 0.536704] hub 8-0:1.0: USB hub found
[ 0.536732] hub 8-0:1.0: 1 port detected
[ 0.537300] i8042: PNP: No PS/2 controller found.
[ 0.537364] mousedev: PS/2 mouse device common for all mice
[ 0.537518] rtc_cmos 00:00: RTC can wake from S4
[ 0.537786] rtc_cmos 00:00: registered as rtc0
[ 0.537830] rtc_cmos 00:00: setting system clock to 2026-09-23T10:13:32 UTC (1790158412)
[ 0.537873] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram
[ 0.537880] i2c_dev: i2c /dev entries driver
[ 0.538001] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.538019] device-mapper: uevent: version 1.0.3
[ 0.538077] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[ 0.539304] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
[ 0.539318] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[ 0.542901] fbcon: Deferring console take-over
[ 0.542907] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.543033] drop_monitor: Initializing network drop monitor service
[ 0.543185] NET: Registered PF_INET6 protocol family
[ 0.543893] Segment Routing with IPv6
[ 0.543909] In-situ OAM (IOAM) with IPv6
[ 0.543949] NET: Registered PF_PACKET protocol family
[ 0.544034] Key type dns_resolver registered
[ 0.546719] x86/amd: Previous system reset reason [0x00080800]: software wrote 0x6 to reset control register 0xCF9
[ 0.546744] microcode: Current revision: 0x0a704108
[ 0.546746] microcode: Updated early from: 0x0a704107
[ 0.549982] resctrl: L3 allocation detected
[ 0.549987] resctrl: MB allocation detected
[ 0.549990] resctrl: SMBA allocation detected
[ 0.549992] resctrl: L3 monitoring detected
[ 0.550034] IPI shorthand broadcast: enabled
[ 0.552299] sched_clock: Marking stable (550735060, 1388138)->(571127875, -19004677)
[ 0.552605] registered taskstats version 1
[ 0.555290] Loading compiled-in X.509 certificates
[ 0.555706] Loaded X.509 cert 'Build time autogenerated kernel key: 95e77db4b9be914d2003459bdb9ea78076958bbb'
[ 0.556272] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing 2025 Kmod: d541cef61dc7e793b7eb7e899970a2eef0b5dc8c'
[ 0.556672] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.556930] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing 2025 Kmod: 4627603d2357a2a3f81006370894c221175893e9'
[ 0.557185] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.557187] blacklist: Loading compiled-in revocation X.509 certificates
[ 0.557212] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 0.557220] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[ 0.557228] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[ 0.557235] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[ 0.557243] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[ 0.557250] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[ 0.557258] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[ 0.557267] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[ 0.562054] Demotion targets for Node 0: null
[ 0.562110] Key type .fscrypt registered
[ 0.562112] Key type fscrypt-provisioning registered
[ 0.562184] Key type big_key registered
[ 0.562192] Key type trusted registered
[ 0.576295] Freeing initrd memory: 93252K
[ 0.590493] Key type encrypted registered
[ 0.590497] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.590507] Loading compiled-in module X.509 certificates
[ 0.591097] Loaded X.509 cert 'Build time autogenerated kernel key: 95e77db4b9be914d2003459bdb9ea78076958bbb'
[ 0.591101] ima: Allocated hash algorithm: sha256
[ 0.612870] ima: No architecture policies found
[ 0.612900] evm: Initialising EVM extended attributes:
[ 0.612902] evm: security.selinux
[ 0.612904] evm: security.SMACK64
[ 0.612906] evm: security.SMACK64EXEC
[ 0.612907] evm: security.SMACK64TRANSMUTE
[ 0.612909] evm: security.SMACK64MMAP
[ 0.612910] evm: security.apparmor
[ 0.612912] evm: security.ima
[ 0.612914] evm: security.capability
[ 0.612917] evm: HMAC attrs: 0x1
[ 0.613107] integrity: Loading X.509 certificate: UEFI:db
[ 0.613721] integrity: Loaded X.509 cert 'Database Key: 377080df5f3f4fd543f2b3742e69d841'
[ 0.613724] integrity: Loading X.509 certificate: UEFI:db
[ 0.613747] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.613750] integrity: Loading X.509 certificate: UEFI:db
[ 0.613768] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.613771] integrity: Loading X.509 certificate: UEFI:db
[ 0.613794] integrity: Loaded X.509 cert 'Microsoft Option ROM UEFI CA 2023: 514fbf937fa46fb57bf07af8bed84b3b864b1711'
[ 0.613796] integrity: Loading X.509 certificate: UEFI:db
[ 0.613814] integrity: Loaded X.509 cert 'Microsoft UEFI CA 2023: 81aa6b3244c935bce0d6628af39827421e32497d'
[ 0.613816] integrity: Loading X.509 certificate: UEFI:db
[ 0.613834] integrity: Loaded X.509 cert 'Microsoft Corporation: Windows UEFI CA 2023: aefc5fbbbe055d8f8daa585473499417ab5a5272'
[ 0.614342] PM: Magic number: 10:973:224
[ 0.614445] memory memory106: hash matches
[ 0.614738] RAS: Correctable Errors collector initialized.
[ 0.616202] clk: Disabling unused clocks
[ 0.616208] PM: genpd: Disabling unused power domains
[ 0.617422] Freeing unused decrypted memory: 2028K
[ 0.618019] Freeing unused kernel image (initmem) memory: 5292K
[ 0.618034] Write protecting the kernel read-only data: 43008k
[ 0.618485] Freeing unused kernel image (text/rodata gap) memory: 776K
[ 0.618767] Freeing unused kernel image (rodata/data gap) memory: 1668K
[ 0.658634] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.658642] Run /init as init process
[ 0.658644] with arguments:
[ 0.658645] /init
[ 0.658647] ---
[ 0.658648] splash
[ 0.658649] with environment:
[ 0.658650] HOME=/
[ 0.658651] TERM=linux
[ 0.770987] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 0.771040] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 0.869138] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WQ00 data block query control method not found
[ 0.871415] ACPI: video: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 0.872128] sdhci: Secure Digital Host Controller Interface driver
[ 0.872130] sdhci: Copyright(c) Pierre Ossman
[ 0.877122] input: Video Bus as /devices/pci0000:00/0000:00:01.1/acpi.video_bus.0/input/input3
[ 0.878188] sdhci-pci 0000:07:00.0: SDHCI controller found [17a0:9755] (rev 1)
[ 0.878304] sdhci-pci 0000:07:00.0: enabling device (0000 -> 0002)
[ 0.878765] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.879934] hid: raw HID events driver (C) Jiri Kosina
[ 0.880244] input: Video Bus as /devices/pci0000:00/0000:00:08.1/acpi.video_bus.1/input/input4
[ 0.891659] pcie_mp2_amd 0000:69:00.7: enabling device (0000 -> 0002)
[ 0.895377] ACPI: bus type thunderbolt registered
[ 0.895694] thunderbolt 0000:6b:00.6: total paths: 3
[ 0.895701] thunderbolt 0000:6b:00.6: IOMMU DMA protection is enabled
[ 0.897119] thunderbolt 0000:6b:00.6: allocating TX ring 0 of size 10
[ 0.897163] thunderbolt 0000:6b:00.6: allocating RX ring 0 of size 10
[ 0.897187] thunderbolt 0000:6b:00.6: control channel created
[ 0.897200] thunderbolt 0000:6b:00.6: using software connection manager
[ 0.900294] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=94.06
[ 0.900299] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.900301] usb 1-2: Product: USB2.1 Hub
[ 0.900302] usb 1-2: Manufacturer: GenesysLogic
[ 0.902007] mmc0: SDHCI controller on PCI [0000:07:00.0] using ADMA 64-bit
[ 0.909265] thunderbolt 0000:6b:00.6: created link from 0000:00:04.1
[ 0.909438] thunderbolt 0000:6b:00.6: NHI initialized, starting thunderbolt
[ 0.909441] thunderbolt 0000:6b:00.6: control channel starting...
[ 0.909442] thunderbolt 0000:6b:00.6: starting TX ring 0
[ 0.909449] thunderbolt 0000:6b:00.6: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[ 0.909452] thunderbolt 0000:6b:00.6: starting RX ring 0
[ 0.909458] thunderbolt 0000:6b:00.6: enabling interrupt at register 0x38200 bit 3 (0x1 -> 0x9)
[ 0.909464] thunderbolt 0000:6b:00.6: security level set to user
[ 0.909634] thunderbolt 0000:6b:00.6: current switch config:
[ 0.909635] thunderbolt 0000:6b:00.6: USB4 Switch: 438:20a (Revision: 0, TB Version: 32)
[ 0.909638] thunderbolt 0000:6b:00.6: Max Port Number: 7
[ 0.909639] thunderbolt 0000:6b:00.6: Config:
[ 0.909641] thunderbolt 0000:6b:00.6: Upstream Port Number: 1 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms
[ 0.909643] thunderbolt 0000:6b:00.6: unknown1: 0x0 unknown4: 0x0
[ 0.911198] thunderbolt 0000:6b:00.6: initializing Switch at 0x0 (depth: 0, up port: 1)
[ 0.912276] usb 3-1: New USB device found, idVendor=3277, idProduct=0018, bcdDevice= 0.03
[ 0.912284] usb 3-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 0.912288] usb 3-1: Product: USB2.0 FHD UVC WebCam
[ 0.912291] usb 3-1: Manufacturer: Sonix Technology Co., Ltd.
[ 0.912379] thunderbolt 0000:6b:00.6: 0: credit allocation parameters:
[ 0.912383] thunderbolt 0000:6b:00.6: 0: USB3: 24
[ 0.912386] thunderbolt 0000:6b:00.6: 0: DP AUX: 1
[ 0.912389] thunderbolt 0000:6b:00.6: 0: PCIe: 32
[ 0.912392] thunderbolt 0000:6b:00.6: 0: DMA: 32
[ 0.914592] thunderbolt 0000:6b:00.6: 0: uid: 0xa391189004381f66
[ 0.914855] thunderbolt 0000:6b:00.6: Port 1: 0:0 (Revision: 0, TB Version: 1, Type: NHI (0x2))
[ 0.914860] thunderbolt 0000:6b:00.6: Max hop id (in/out): 2/2
[ 0.914863] thunderbolt 0000:6b:00.6: Max counters: 3
[ 0.914866] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 0.914869] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 0.916173] thunderbolt 0000:6b:00.6: Port 2: 0:0 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 0.916177] thunderbolt 0000:6b:00.6: Max hop id (in/out): 16/16
[ 0.916180] thunderbolt 0000:6b:00.6: Max counters: 10
[ 0.916183] thunderbolt 0000:6b:00.6: NFC Credits: 0x88000000
[ 0.916186] thunderbolt 0000:6b:00.6: Credits (total/control): 128/2
[ 0.917336] thunderbolt 0000:6b:00.6: Port 3: 0:0 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 0.917340] thunderbolt 0000:6b:00.6: Max hop id (in/out): 16/16
[ 0.917343] thunderbolt 0000:6b:00.6: Max counters: 10
[ 0.917346] thunderbolt 0000:6b:00.6: NFC Credits: 0x88000000
[ 0.917348] thunderbolt 0000:6b:00.6: Credits (total/control): 128/2
[ 0.917597] thunderbolt 0000:6b:00.6: Port 4: 0:0 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[ 0.917601] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 0.917604] thunderbolt 0000:6b:00.6: Max counters: 1
[ 0.917607] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 0.917610] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 0.917858] thunderbolt 0000:6b:00.6: Port 5: 0:0 (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 0.917862] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 0.917865] thunderbolt 0000:6b:00.6: Max counters: 1
[ 0.917867] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 0.917870] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 0.918127] thunderbolt 0000:6b:00.6: Port 6: 0:0 (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[ 0.918131] thunderbolt 0000:6b:00.6: Max hop id (in/out): 9/8
[ 0.918134] thunderbolt 0000:6b:00.6: Max counters: 2
[ 0.918137] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 0.918139] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 0.918388] thunderbolt 0000:6b:00.6: Port 7: 0:0 (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[ 0.918392] thunderbolt 0000:6b:00.6: Max hop id (in/out): 9/8
[ 0.918395] thunderbolt 0000:6b:00.6: Max counters: 2
[ 0.918397] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 0.918400] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 0.918403] thunderbolt 0000:6b:00.6: 0: running quirk_clx_disable [thunderbolt]
[ 0.918446] thunderbolt 0000:6b:00.6: 0: disabling CL states
[ 0.918449] thunderbolt 0000:6b:00.6: 0: linked ports 2 <-> 3
[ 0.920597] thunderbolt 0000:6b:00.6: 0: TMU: supports uni-directional mode
[ 0.920733] thunderbolt 0000:6b:00.6: 0: TMU: current mode: bi-directional, HiFi
[ 0.922645] thunderbolt 0000:6b:00.6: 0: TMU: mode change bi-directional, HiFi -> uni-directional, LowRes requested
[ 0.923081] thunderbolt 0000:6b:00.6: 0: TMU: mode set to: uni-directional, LowRes
[ 0.923469] thunderbolt 0000:6b:00.6: 0: resetting
[ 0.940287] thunderbolt 0000:6b:00.6: 0:6: DP IN resource available
[ 0.941286] thunderbolt 0000:6b:00.6: 0:7: DP IN resource available
[ 0.947067] hub 1-2:1.0: USB hub found
[ 0.947675] hub 1-2:1.0: 4 ports detected
[ 0.997159] i2c_hid_acpi i2c-ELAN9008:00: i2c_hid_get_input: IRQ triggered but there's no data
[ 0.997546] Key type psk registered
[ 0.998397] input: ASUE120A:00 04F3:327D Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-ASUE120A:00/0018:04F3:327D.0001/input/input5
[ 0.998595] input: ASUE120A:00 04F3:327D Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-ASUE120A:00/0018:04F3:327D.0001/input/input6
[ 0.998784] hid-generic 0018:04F3:327D.0001: input,hidraw0: I2C HID v1.00 Mouse [ASUE120A:00 04F3:327D] on i2c-ASUE120A:00
[ 0.999974] input: ELAN9008:00 04F3:40FD Touchscreen as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input7
[ 1.000164] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input8
[ 1.000226] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input9
[ 1.000294] input: ELAN9008:00 04F3:40FD Stylus as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input10
[ 1.000398] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input12
[ 1.000469] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input13
[ 1.000534] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input14
[ 1.006054] nvme 0000:08:00.0: platform quirk: setting simple suspend
[ 1.006139] nvme nvme0: pci function 0000:08:00.0
[ 1.011319] usb 2-2: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[ 1.025543] usb 2-2: New USB device found, idVendor=05e3, idProduct=0625, bcdDevice=94.06
[ 1.025548] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.025552] usb 2-2: Product: USB3.2 Hub
[ 1.025555] usb 2-2: Manufacturer: GenesysLogic
[ 1.034403] hid-generic 0018:04F3:40FD.0002: input,hidraw1: I2C HID v1.00 Device [ELAN9008:00 04F3:40FD] on i2c-ELAN9008:00
[ 1.041074] nvme nvme0: allocated 64 MiB host memory buffer (1 segment).
[ 1.042867] hub 2-2:1.0: USB hub found
[ 1.043177] hub 2-2:1.0: 4 ports detected
[ 1.043782] nvme nvme0: 16/0/0 default/read/poll queues
[ 1.048405] nvme0n1: p1 p2 p3 p5 p6 p7 p8
[ 1.096647] input: ASUE120A:00 04F3:327D Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-ASUE120A:00/0018:04F3:327D.0001/input/input16
[ 1.096794] input: ASUE120A:00 04F3:327D Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-ASUE120A:00/0018:04F3:327D.0001/input/input17
[ 1.096944] hid-multitouch 0018:04F3:327D.0001: input,hidraw0: I2C HID v1.00 Mouse [ASUE120A:00 04F3:327D] on i2c-ASUE120A:00
[ 1.135492] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[ 1.179105] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input18
[ 1.179202] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input19
[ 1.179258] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input20
[ 1.179320] input: ELAN9008:00 04F3:40FD Stylus as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input21
[ 1.179417] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input23
[ 1.179483] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input24
[ 1.179541] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input25
[ 1.213777] hid-multitouch 0018:04F3:40FD.0002: input,hidraw1: I2C HID v1.00 Device [ELAN9008:00 04F3:40FD] on i2c-ELAN9008:00
[ 1.286071] usb 1-3: New USB device found, idVendor=0b05, idProduct=19b6, bcdDevice= 0.02
[ 1.286088] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.286095] usb 1-3: Product: N-KEY Device
[ 1.286101] usb 1-3: Manufacturer: ASUSTeK Computer Inc.
[ 1.353954] usb 1-2.4: new high-speed USB device number 4 using xhci_hcd
[ 1.461324] usb 1-2.4: New USB device found, idVendor=3151, idProduct=5029, bcdDevice= 5.00
[ 1.461334] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.461337] usb 1-2.4: Product: MG68
[ 1.461339] usb 1-2.4: Manufacturer:
[ 1.490926] tsc: Refined TSC clocksource calibration: 3992.471 MHz
[ 1.490949] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x73192991fbc, max_idle_ns: 881591058326 ns
[ 1.491134] clocksource: Switched to clocksource tsc
[ 1.522690] usb 2-2.2: new SuperSpeed USB device number 3 using xhci_hcd
[ 1.536221] usb 2-2.2: New USB device found, idVendor=30de, idProduct=6545, bcdDevice= 1.10
[ 1.536230] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.536233] usb 2-2.2: Product: TransMemory
[ 1.536236] usb 2-2.2: Manufacturer: KIOXIA
[ 1.536238] usb 2-2.2: SerialNumber: <USB_SERIAL_REDACTED>
[ 1.571305] mmc0: new UHS-I speed SDR104 SDXC card at address aaaa
[ 1.576872] mmcblk0: mmc0:aaaa SD128 119 GiB
[ 1.578277] mmcblk0: p1
[ 1.593479] usb-storage 2-2.2:1.0: USB Mass Storage device detected
[ 1.593715] scsi host0: usb-storage 2-2.2:1.0
[ 1.593848] usbcore: registered new interface driver usb-storage
[ 1.595220] usbcore: registered new interface driver uas
[ 1.667029] usb 1-4: new full-speed USB device number 5 using xhci_hcd
[ 1.805095] usb 1-4: New USB device found, idVendor=0489, idProduct=e10a, bcdDevice= 0.01
[ 1.805104] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.829163] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0003/input/input27
[ 1.829314] input: ASUSTeK Computer Inc. N-KEY Device Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0003/input/input28
[ 1.880281] input: ASUSTeK Computer Inc. N-KEY Device Wireless Radio Control as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0003/input/input29
[ 1.880491] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0003/input/input30
[ 1.880622] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0003/input/input31
[ 1.880844] hid-generic 0003:0B05:19B6.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input0
[ 1.885582] hid-generic 0003:0B05:19B6.0004: hiddev1,hidraw3: USB HID v1.10 Device [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input1
[ 1.890099] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.2/0003:0B05:19B6.0005/input/input32
[ 1.941456] hid-generic 0003:0B05:19B6.0005: input,hidraw4: USB HID v1.10 Keyboard [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input2
[ 1.946959] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.3/0003:0B05:19B6.0006/input/input33
[ 1.947327] hid-generic 0003:0B05:19B6.0006: input,hidraw5: USB HID v1.10 Mouse [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input3
[ 1.948567] input: MG68 as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2.4/1-2.4:1.0/0003:3151:5029.0007/input/input34
[ 2.000332] hid-generic 0003:3151:5029.0007: input,hidraw6: USB HID v1.11 Keyboard [ MG68] on usb-0000:69:00.3-2.4/input0
[ 2.001702] hid-generic 0003:3151:5029.0008: ignoring exceeding usage max
[ 2.002458] input: MG68 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2.4/1-2.4:1.1/0003:3151:5029.0008/input/input35
[ 2.054326] input: MG68 System Control as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2.4/1-2.4:1.1/0003:3151:5029.0008/input/input36
[ 2.054532] input: MG68 Keyboard as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2.4/1-2.4:1.1/0003:3151:5029.0008/input/input37
[ 2.054646] input: MG68 Mouse as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2.4/1-2.4:1.1/0003:3151:5029.0008/input/input38
[ 2.054778] input: MG68 as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2.4/1-2.4:1.1/0003:3151:5029.0008/input/input39
[ 2.054986] hid-generic 0003:3151:5029.0008: input,hiddev2,hidraw7: USB HID v1.11 Keyboard [ MG68] on usb-0000:69:00.3-2.4/input1
[ 2.056098] hid-generic 0003:3151:5029.0009: hiddev3,hidraw8: USB HID v1.11 Device [ MG68] on usb-0000:69:00.3-2.4/input2
[ 2.056148] usbcore: registered new interface driver usbhid
[ 2.056151] usbhid: USB HID core driver
[ 2.066041] asus_wmi: ASUS WMI generic driver loaded
[ 2.119872] asus 0003:0B05:19B6.0003: Fixing up Asus N-Key report descriptor
[ 2.122640] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0003/input/input40
[ 2.174733] asus 0003:0B05:19B6.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input0
[ 2.199517] asus 0003:0B05:19B6.0004: hiddev1,hidraw3: USB HID v1.10 Device [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input1
[ 2.227147] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.2/0003:0B05:19B6.0005/input/input41
[ 2.278486] asus 0003:0B05:19B6.0005: input,hidraw4: USB HID v1.10 Keyboard [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input2
[ 2.293672] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.3/0003:0B05:19B6.0006/input/input42
[ 2.294071] asus 0003:0B05:19B6.0006: input,hidraw5: USB HID v1.10 Mouse [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input3
[ 2.368419] raid6: avx512x4 gen() 51380 MB/s
[ 2.385390] raid6: avx512x2 gen() 53154 MB/s
[ 2.402415] raid6: avx512x1 gen() 51711 MB/s
[ 2.419413] raid6: avx2x4 gen() 53838 MB/s
[ 2.436413] raid6: avx2x2 gen() 47598 MB/s
[ 2.453414] raid6: avx2x1 gen() 34467 MB/s
[ 2.453416] raid6: using algorithm avx2x4 gen() 53838 MB/s
[ 2.470414] raid6: .... xor() 5085 MB/s, rmw enabled
[ 2.470415] raid6: using avx512x2 recovery algorithm
[ 2.471326] xor: automatically using best checksumming function avx
[ 2.472001] async_tx: api initialized (async)
[ 2.644121] scsi 0:0:0:0: Direct-Access KIOXIA TransMemory PMAP PQ: 0 ANSI: 6
[ 2.644839] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.645474] sd 0:0:0:0: [sda] 243990528 512-byte logical blocks: (125 GB/116 GiB)
[ 2.645702] sd 0:0:0:0: [sda] Write Protect is off
[ 2.645717] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00
[ 2.645932] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.678852] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 2.678857] GPT:12660955 != 243990527
[ 2.678861] GPT:Alternate GPT header not at the end of the disk.
[ 2.678864] GPT:12660955 != 243990527
[ 2.678866] GPT: Use GNU Parted to correct GPT errors.
[ 2.678875] sda: sda1 sda2 sda3
[ 2.679119] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.090239] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 4.090753] ISO 9660 Extensions: RRIP_1991A
[ 4.478729] sda: sda1 sda2 sda3 sda4
[ 7.443282] hid-generic 0020:1022:0001.000A: hidraw9: SENSOR HUB HID v0.00 Device [hid-amdsfh 1022:0001] on pcie_mp2_amd
[ 7.447788] hid-sensor-hub 0020:1022:0001.000A: hidraw9: SENSOR HUB HID v0.00 Device [hid-amdsfh 1022:0001] on pcie_mp2_amd
[ 19.187254] thunderbolt 0000:6b:00.6: 0: suspending switch
[ 19.187274] thunderbolt 0000:6b:00.6: 0: enabling wakeup: 0x3f
[ 19.187975] thunderbolt 0000:6b:00.6: stopping RX ring 0
[ 19.187996] thunderbolt 0000:6b:00.6: disabling interrupt at register 0x38200 bit 3 (0x9 -> 0x1)
[ 19.188034] thunderbolt 0000:6b:00.6: stopping TX ring 0
[ 19.188043] thunderbolt 0000:6b:00.6: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[ 19.188065] thunderbolt 0000:6b:00.6: control channel stopped
[ 156.010014] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 156.010593] ISO 9660 Extensions: RRIP_1991A
[ 156.032213] loop0: detected capacity change from 0 to 6703392
[ 156.061247] loop1: detected capacity change from 0 to 1152448
[ 156.089566] loop2: detected capacity change from 0 to 1549048
[ 156.100539] overlayfs: null uuid in non-single lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 158.030689] EXT4-fs (sda4): mounted filesystem b5e9fe32-1609-4d41-b565-c6207f53c1c7 r/w with ordered data mode. Quota mode: none.
[ 158.386967] evm: overlay not supported
[ 168.991782] systemd[1]: Inserted module 'autofs4'
[ 169.350090] systemd[1]: systemd 259.5-0ubuntu3.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 169.350130] systemd[1]: Detected architecture x86-64.
[ 169.355528] systemd[1]: Initializing machine ID from random generator.
[ 169.355609] systemd[1]: Hostname set to <ubuntu>.
[ 169.422988] systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported.
[ 169.731781] systemd[1]: /usr/lib/systemd/system/xfs_scrub_all.service:26: Support for option CPUAccounting= has been removed and it is ignored
[ 169.732233] systemd[1]: /usr/lib/systemd/system/system-xfs_scrub.slice:15: Support for option CPUAccounting= has been removed and it is ignored
[ 169.829424] systemd[1]: Queued start job for default target graphical.target.
[ 169.837782] systemd[1]: Created slice system-cups.slice - CUPS Slice.
[ 169.838141] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 169.838517] systemd[1]: Created slice system-xfs_scrub.slice - xfs_scrub background service slice.
[ 169.838731] systemd[1]: Created slice user.slice - User and Session Slice.
[ 169.838773] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 169.838925] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 169.838944] systemd[1]: Reached target imports.target - Image Downloads.
[ 169.838951] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 169.838966] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 169.838972] systemd[1]: Reached target slices.target - Slice Units.
[ 169.838985] systemd[1]: Reached target swap.target - Swaps.
[ 169.838993] systemd[1]: Reached target time-set.target - System Time Set.
[ 169.839013] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 169.839077] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[ 169.839118] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[ 169.839176] systemd[1]: Listening on syslog.socket - Syslog Socket.
[ 169.840260] systemd[1]: Listening on systemd-ask-password.socket - Query the User Interactively for a Password.
[ 169.840582] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 169.840994] systemd[1]: Listening on systemd-factory-reset.socket - Factory Reset Management.
[ 169.841040] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 169.841093] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 169.841583] systemd[1]: Listening on systemd-mute-console.socket - Console Output Muting Service Socket.
[ 169.841653] systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
[ 169.841679] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.841688] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.841727] systemd[1]: Listening on systemd-resolved-monitor.socket - Resolve Monitor Varlink Socket.
[ 169.841757] systemd[1]: Listening on systemd-resolved-varlink.socket - Resolve Service Varlink Socket.
[ 169.841802] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 169.841839] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 169.841875] systemd[1]: Listening on systemd-udevd-varlink.socket - udev Varlink Socket.
[ 169.845680] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 169.846647] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 169.847280] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 169.847916] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 169.849296] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 169.849886] systemd[1]: Starting blk-availability.service - Availability of block devices...
[ 169.850524] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 169.862401] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 169.862952] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 169.862971] systemd[1]: modprobe@configfs.service - Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs
[ 169.863533] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 169.863551] systemd[1]: modprobe@drm.service - Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
[ 169.864098] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 169.864115] systemd[1]: modprobe@fuse.service - Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
[ 169.864630] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 169.864736] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
[ 169.873585] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 169.873602] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.873624] systemd[1]: systemd-pcrproduct.service - TPM NvPCR Product ID Measurement skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.874249] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 169.874310] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.875336] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 169.875988] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 169.912645] systemd[1]: Finished blk-availability.service - Availability of block devices.
[ 169.916327] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 169.917119] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 169.942514] pstore: Using crash dump compression: deflate
[ 169.943798] pstore: Registered efi_pstore as persistent store backend
[ 169.944199] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 169.944352] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 169.955240] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 169.955334] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 169.955413] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 169.955486] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 169.955555] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 169.955626] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 169.961230] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 169.964560] systemd[1]: Starting cloud-init-main.service - Cloud-init: Single Process...
[ 169.968991] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database skipped, no trigger condition checks were met.
[ 169.969062] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
[ 169.972282] systemd-journald[1356]: Collecting audit messages is disabled.
[ 169.974058] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 169.974074] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.974087] systemd[1]: systemd-pcrnvdone.service - TPM PCR NvPCR Initialization Separator skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.974410] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 169.984602] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ 169.996800] ppdev: user-space parallel port driver
[ 169.996893] lp: driver loaded but no devices found
[ 169.997684] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 169.998598] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 170.002225] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 170.010444] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 170.011853] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 170.033049] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[ 170.034624] systemd[1]: Starting systemd-oomd.service - Userspace Out-Of-Memory (OOM) Killer...
[ 170.035281] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 170.035574] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 170.036779] systemd[1]: Starting systemd-resolved.service - Network Name Resolution...
[ 170.046835] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ 170.047898] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[ 170.049172] systemd[1]: Finished lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 170.049244] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[ 170.062208] systemd[1]: Started systemd-journald.service - Journal Service.
[ 170.092643] systemd-journald[1356]: Received client request to flush runtime journal.
[ 174.060583] Serial bus multi instantiate pseudo device driver CSC3551:00: Instantiated 2 I2C devices.
[ 174.138145] asus_wmi: Initialization: 0x1
[ 174.138217] asus_wmi: BIOS WMI version: 9.0
[ 174.138268] asus_wmi: SFUN value: 0x21
[ 174.138271] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 174.159749] asus-nb-wmi asus-nb-wmi: Using throttle_thermal_policy for platform_profile support
[ 174.165952] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 174.165957] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 174.172729] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 174.188329] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 174.191779] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input43
[ 174.238021] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 174.238027] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 174.238029] RAPL PMU: hw unit of domain core 2^-16 Joules
[ 174.242352] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Adding DSD properties for 10431533
[ 174.242356] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Cannot add Reset/Speaker ID/SPI CS GPIO Mapping, _DSD already exists.
[ 174.244131] asus_wmi: fan_curve_get_factory_default (0x00110032) failed: -19
[ 174.244194] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Using extra _DSD properties, bypassing _DSD in ACPI
[ 174.314911] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Cirrus Logic CS35L41 (35a40), Revision: B2
[ 174.315091] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Adding DSD properties for 10431533
[ 174.315094] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Cannot add Reset/Speaker ID/SPI CS GPIO Mapping, _DSD already exists.
[ 174.315243] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Using extra _DSD properties, bypassing _DSD in ACPI
[ 174.315245] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Reset line busy, assuming shared reset
[ 174.342422] ccp 0000:69:00.2: enabling device (0000 -> 0002)
[ 174.344981] ccp 0000:69:00.2: tee enabled
[ 174.345424] ccp 0000:69:00.2: psp enabled
[ 174.389591] kvm_amd: TSC scaling supported
[ 174.389597] kvm_amd: Nested Virtualization enabled
[ 174.389600] kvm_amd: Nested Paging enabled
[ 174.389603] kvm_amd: LBR virtualization supported
[ 174.389608] kvm_amd: [Firmware Bug]: Cannot enable x2AVIC, AVIC is unsupported
[ 174.389610] kvm_amd: Virtual GIF supported
[ 174.389611] kvm_amd: Virtual NMI enabled
[ 174.399120] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Cirrus Logic CS35L41 (35a40), Revision: B2
[ 174.415578] MCE: In-kernel MCE decoding enabled.
[ 174.485915] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 174.486116] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 174.486217] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 174.521328] amd_atl: AMD Address Translation Library initialized
[ 174.521357] Bluetooth: Core ver 2.22
[ 174.521502] NET: Registered PF_BLUETOOTH protocol family
[ 174.521504] Bluetooth: HCI device and connection manager initialized
[ 174.521509] Bluetooth: HCI socket layer initialized
[ 174.521512] Bluetooth: L2CAP socket layer initialized
[ 174.521518] Bluetooth: SCO socket layer initialized
[ 174.525485] mc: Linux media interface: v0.10
[ 174.527665] amdxdna 0000:6a:00.1: [drm] Load firmware amdnpu/1502_00/npu_7.sbin
[ 174.527678] amdxdna 0000:6a:00.1: enabling device (0000 -> 0002)
[ 174.559664] intel_rapl_common: Found RAPL domain package
[ 174.559669] intel_rapl_common: Found RAPL domain core
[ 174.559830] videodev: Linux video capture interface: v2.00
[ 174.559886] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 174.560578] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 174.560591] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 174.561076] snd_hda_intel 0000:69:00.1: enabling device (0000 -> 0002)
[ 174.563784] snd_hda_intel 0000:69:00.1: Handle vga_switcheroo audio client
[ 174.600319] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:69:00.1/sound/card1/input44
[ 174.600405] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:69:00.1/sound/card1/input45
[ 174.604007] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input46
[ 174.604170] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input47
[ 174.604447] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input48
[ 174.604631] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input49
[ 174.624483] usbcore: registered new interface driver btusb
[ 174.628551] uvcvideo 3-1:1.0: Found UVC 1.00 device USB2.0 FHD UVC WebCam (3277:0018)
[ 174.650670] uvcvideo 3-1:1.2: Found UVC 1.00 device USB2.0 FHD UVC WebCam (3277:0018)
[ 174.658583] usbcore: registered new interface driver uvcvideo
[ 174.669047] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00190200.bin
[ 174.669053] Bluetooth: hci0: QCA: patch rome 0x190200 build 0x8567, firmware rome 0x190200 build 0x43fb
[ 174.680798] [drm] Initialized amdxdna_accel_driver 0.7.0 for 0000:6a:00.1 on minor 0
[ 174.715270] snd_hda_codec_alc269 hdaudioC2D0: ALC294: picked fixup for PCI SSID 1043:1533
[ 174.715466] ath12k_wifi7_pci 0000:06:00.0: BAR 0 [mem 0xdda00000-0xddbfffff 64bit]: assigned
[ 174.715487] ath12k_wifi7_pci 0000:06:00.0: enabling device (0000 -> 0002)
[ 174.715525] ath12k_wifi7_pci 0000:06:00.0: Wi-Fi 7 Hardware name: wcn7850 hw2.0
[ 174.715879] ath12k_wifi7_pci 0000:06:00.0: MSI vectors: 16
[ 174.717349] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 174.717358] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.GPP0.PEGP handle
[ 174.717359] nouveau: detected PR support, will not use DSM
[ 174.717391] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[ 174.717500] nouveau 0000:01:00.0: NVIDIA AD107 (197000a1)
[ 174.781862] snd_pci_ps 0000:69:00.5: enabling device (0000 -> 0002)
[ 174.782091] acpi device:2e: Failed to read mipi-sdw-manager-list: -22
[ 174.797174] NET: Registered PF_QIPCRTR protocol family
[ 174.853208] mhi mhi0: Requested to power ON
[ 174.853222] mhi mhi0: Power on setup success
[ 175.001407] mhi mhi0: Wait for device to enter SBL or Mission mode
[ 175.031251] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw: format 3 timestamp 0x6128e16b
[ 175.031258] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
[ 175.113725] nouveau 0000:01:00.0: gsp: RM version: 570.144
[ 175.241261] nouveau 0000:01:00.0: bios: version 95.07.26.00.1b
[ 175.296474] ACPI: battery: new hook: ASUS Battery Extension
[ 175.317162] Bluetooth: hci0: using NVM file: qca/nvm_usb_00190200.bin
[ 175.458438] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 176.009858] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
[ 176.012177] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533-spkid1-l0.bin (v1): v0.43.1
[ 176.012180] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: C:\Users\dchunyi\Documents\Asus_ROG\Project\GV302\Tuning\20220916\10431533_220916_V1_A0.bin
[ 176.155470] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Calibration applied: R0=10386
[ 176.177031] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Firmware Loaded - Type: spk-prot, Gain: 17
[ 176.177104] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: CS35L41 Bound - SSID: 10431533, BST: 0, VSPK: 0, CH: L, FW EN: 1, SPKID: 1
[ 176.177112] snd_hda_codec_alc269 hdaudioC2D0: bound i2c-CSC3551:00-cs35l41-hda.0 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[ 176.191218] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw: format 3 timestamp 0x6128e16b
[ 176.191227] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
[ 176.229453] nouveau 0000:01:00.0: drm: VRAM: 8188 MiB
[ 176.229456] nouveau 0000:01:00.0: drm: GART: 536870912 MiB
[ 176.257838] nouveau 0000:01:00.0: drm: MM: using COPY for buffer copies
[ 176.329689] amdgpu: vga_switcheroo: detected switching method \_SB_.PCI0.GP17.VGA_.ATPX handle
[ 176.329890] amdgpu: ATPX version 1, functions 0x00000801
[ 176.329999] amdgpu: ATPX Hybrid Graphics
[ 176.340810] amdgpu: Virtual CRAT table created for CPU
[ 176.340828] amdgpu: Topology: Add CPU node
[ 176.340996] amdgpu 0000:69:00.0: enabling device (0006 -> 0007)
[ 176.341048] amdgpu 0000:69:00.0: initializing kernel modesetting (IP DISCOVERY 0x1002:0x15BF 0x1043:0x1533 0xC6).
[ 176.341253] amdgpu 0000:69:00.0: register mmio base: 0xDD800000
[ 176.341255] amdgpu 0000:69:00.0: register mmio size: 524288
[ 176.342983] ath12k_wifi7_pci 0000:06:00.0: chip_id 0x2 chip_family 0x4 board_id 0xff soc_id 0x40170200
[ 176.342990] ath12k_wifi7_pci 0000:06:00.0: fw_version 0x1103006c fw_build_timestamp 2026-03-06 09:10 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
[ 176.345279] amdgpu 0000:69:00.0: detected ip block number 0 <common_v1_0_0> (soc21_common)
[ 176.345283] amdgpu 0000:69:00.0: detected ip block number 1 <gmc_v11_0_0> (gmc_v11_0)
[ 176.345286] amdgpu 0000:69:00.0: detected ip block number 2 <ih_v6_0_0> (ih_v6_0)
[ 176.345288] amdgpu 0000:69:00.0: detected ip block number 3 <psp_v13_0_4> (psp)
[ 176.345291] amdgpu 0000:69:00.0: detected ip block number 4 <smu_v13_0_0> (smu)
[ 176.345294] amdgpu 0000:69:00.0: detected ip block number 5 <dce_v1_0_0> (dm)
[ 176.345297] amdgpu 0000:69:00.0: detected ip block number 6 <gfx_v11_0_0> (gfx_v11_0)
[ 176.345300] amdgpu 0000:69:00.0: detected ip block number 7 <sdma_v6_0_0> (sdma_v6_0)
[ 176.345303] amdgpu 0000:69:00.0: detected ip block number 8 <vcn_v4_0_0> (vcn_v4_0)
[ 176.345306] amdgpu 0000:69:00.0: detected ip block number 9 <jpeg_v4_0_0> (jpeg_v4_0)
[ 176.345308] amdgpu 0000:69:00.0: detected ip block number 10 <mes_v11_0_0> (mes_v11_0)
[ 176.345350] amdgpu 0000:69:00.0: Fetched VBIOS from VFCT
[ 176.345354] amdgpu 0000:69:00.0: [drm] ATOM BIOS: 113-PHXGENERIC-001
[ 176.381041] amdgpu 0000:69:00.0: vgaarb: deactivate vga console
[ 176.381047] amdgpu 0000:69:00.0: Trusted Memory Zone (TMZ) feature enabled
[ 176.381101] amdgpu 0000:69:00.0: vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 176.381127] amdgpu 0000:69:00.0: VRAM: 512M 0x0000008000000000 - 0x000000801FFFFFFF (512M used)
[ 176.381130] amdgpu 0000:69:00.0: GART: 512M 0x00007FFF00000000 - 0x00007FFF1FFFFFFF
[ 176.381152] amdgpu 0000:69:00.0: [drm] Detected VRAM RAM=512M, BAR=512M
[ 176.381154] amdgpu 0000:69:00.0: [drm] RAM width 128bits LPDDR5
[ 176.381273] amdgpu 0000:69:00.0: 512M of VRAM memory ready
[ 176.381277] amdgpu 0000:69:00.0: 7589M of GTT memory ready.
[ 176.381302] amdgpu 0000:69:00.0: [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 176.381869] amdgpu 0000:69:00.0: [drm] PCIE GART of 512M enabled (table at 0x000000801FD00000).
[ 176.382412] amdgpu 0000:69:00.0: [drm] Loading DMUB firmware via PSP: version=0x08005700
[ 176.382878] amdgpu 0000:69:00.0: [VCN instance 0] Found VCN firmware Version ENC: 1.24 DEC: 9 VEP: 0 Revision: 16
[ 176.382975] amdgpu 0000:69:00.0: MES: vmid_mask_mmhub 0x0000ff00, vmid_mask_gfxhub 0x0000ff00
[ 176.382978] amdgpu 0000:69:00.0: MES: gfx_hqd_mask 0x00000002, compute_hqd_mask 0x0000000c, sdma_hqd_mask 0x000000fc
[ 176.407417] amdgpu 0000:69:00.0: reserve 0x4a00000 from 0x8010000000 for PSP TMR
[ 176.545041] debugfs: 'simulate_fw_crash' already exists in 'pci-0000:06:00.0'
[ 176.545065] debugfs: 'device_dp_stats' already exists in 'pci-0000:06:00.0'
[ 176.545339] ieee80211 phy0: copying sband (band 1) due to VHT EXT NSS BW flag
[ 176.551215] ath12k_wifi7_pci 0000:06:00.0 wlp6s0: renamed from wlan0
[ 176.987648] amdgpu 0000:69:00.0: RAS: optional ras ta ucode is not available
[ 176.995954] amdgpu 0000:69:00.0: RAP: optional rap ta ucode is not available
[ 176.995958] amdgpu 0000:69:00.0: SECUREDISPLAY: optional securedisplay ta ucode is not available
[ 177.024462] amdgpu 0000:69:00.0: SMU is initialized successfully!
[ 177.026264] amdgpu 0000:69:00.0: [drm] Display Core v3.2.369 initialized on DCN 3.1.4
[ 177.026270] amdgpu 0000:69:00.0: [drm] DP-HDMI FRL PCON supported
[ 177.028446] amdgpu 0000:69:00.0: [drm] DMUB hardware initialized: version=0x08005700
[ 177.171113] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
[ 177.173438] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533-spkid1-r0.bin (v1): v0.43.1
[ 177.173446] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: C:\Users\dchunyi\Documents\Asus_ROG\Project\GV302\Tuning\20220916\10431533_220916_V1_A1.bin
[ 177.316027] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Calibration applied: R0=10318
[ 177.336972] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Firmware Loaded - Type: spk-prot, Gain: 17
[ 177.337041] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: CS35L41 Bound - SSID: 10431533, BST: 0, VSPK: 0, CH: R, FW EN: 1, SPKID: 1
[ 177.337047] snd_hda_codec_alc269 hdaudioC2D0: bound i2c-CSC3551:00-cs35l41-hda.1 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[ 177.337115] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[ 177.337522] snd_hda_codec_alc269 hdaudioC2D0: autoconfig for ALC294: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 177.337530] snd_hda_codec_alc269 hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 177.337535] snd_hda_codec_alc269 hdaudioC2D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 177.337540] snd_hda_codec_alc269 hdaudioC2D0: mono: mono_out=0x0
[ 177.337544] snd_hda_codec_alc269 hdaudioC2D0: inputs:
[ 177.337549] snd_hda_codec_alc269 hdaudioC2D0: Internal Mic=0x12
[ 177.337553] snd_hda_codec_alc269 hdaudioC2D0: Internal Mic=0x13
[ 177.337813] snd_hda_intel 0000:69:00.1: bound 0000:69:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 177.339996] nouveau 0000:01:00.0: [drm] Registered 4 planes with drm panic
[ 177.340001] [drm] Initialized nouveau 1.4.2 for 0000:01:00.0 on minor 1
[ 177.341787] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 177.347171] thunderbolt 0000:6b:00.6: display driver bound, retrying DP tunneling
[ 177.347176] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 177.347178] thunderbolt 0000:6b:00.6: no suitable DP IN adapter available, not tunneling
[ 177.348022] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 177.348197] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 177.422119] amdgpu 0000:69:00.0: [drm] eDP-2: PSR support 1, DC PSR ver 0, sink PSR ver 4 DPCD caps 0x3a su_y_granularity 4
[ 177.422291] amdgpu 0000:69:00.0: [drm] HDMI-A-2: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.422398] amdgpu 0000:69:00.0: [drm] DP-1: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.422519] amdgpu 0000:69:00.0: [drm] DP-2: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.422711] amdgpu 0000:69:00.0: [drm] DP-3: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.422793] amdgpu 0000:69:00.0: [drm] DP-4: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.422879] amdgpu 0000:69:00.0: [drm] DP-5: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.422967] amdgpu 0000:69:00.0: [drm] DP-6: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.423052] amdgpu 0000:69:00.0: [drm] DP-7: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.428659] kfd kfd: Allocated 3969056 bytes on gart
[ 177.428674] kfd kfd: Total number of KFD nodes to be created: 1
[ 177.428794] amdgpu: Virtual CRAT table created for GPU
[ 177.429149] amdgpu: Topology: Add GPU node [0x1002:0x15bf]
[ 177.429151] kfd kfd: added device 1002:15bf
[ 177.429159] amdgpu 0000:69:00.0: SE 1, SH per SE 2, CU per SH 6, active_cu_number 12
[ 177.429171] amdgpu 0000:69:00.0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 177.429173] amdgpu 0000:69:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 177.429175] amdgpu 0000:69:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 177.429176] amdgpu 0000:69:00.0: ring comp_1.2.0 uses VM inv eng 6 on hub 0
[ 177.429178] amdgpu 0000:69:00.0: ring comp_1.3.0 uses VM inv eng 7 on hub 0
[ 177.429179] amdgpu 0000:69:00.0: ring comp_1.0.1 uses VM inv eng 8 on hub 0
[ 177.429181] amdgpu 0000:69:00.0: ring comp_1.1.1 uses VM inv eng 9 on hub 0
[ 177.429182] amdgpu 0000:69:00.0: ring comp_1.2.1 uses VM inv eng 10 on hub 0
[ 177.429184] amdgpu 0000:69:00.0: ring comp_1.3.1 uses VM inv eng 11 on hub 0
[ 177.429185] amdgpu 0000:69:00.0: ring sdma0 uses VM inv eng 12 on hub 0
[ 177.429187] amdgpu 0000:69:00.0: ring vcn_unified_0 uses VM inv eng 0 on hub 8
[ 177.429189] amdgpu 0000:69:00.0: ring jpeg_dec uses VM inv eng 1 on hub 8
[ 177.429190] amdgpu 0000:69:00.0: ring mes_kiq_3.1.0 uses VM inv eng 13 on hub 0
[ 177.430703] amdgpu 0000:69:00.0: Runtime PM not available
[ 177.430953] amdgpu 0000:69:00.0: [drm] Skipping amdgpu DM backlight registration
[ 177.432254] amdgpu 0000:69:00.0: [drm] Registered 4 planes with drm panic
[ 177.432257] [drm] Initialized amdgpu 3.64.0 for 0000:69:00.0 on minor 2
[ 177.439859] fbcon: amdgpudrmfb (fb0) is primary device
[ 177.439862] fbcon: Deferring console take-over
[ 177.439865] amdgpu 0000:69:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 177.459172] [drm] pre_validate_dsc:1667 MST_DSC dsc precompute is not needed
[ 177.788778] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:69:00.6/sound/card2/input50
[ 178.103349] spl: loading out-of-tree module taints kernel.
[ 178.170292] zfs: module license 'CDDL' taints kernel.
[ 178.170298] Disabling lock debugging due to kernel taint
[ 178.170308] zfs: module license taints kernel.
[ 178.534734] ZFS: Loaded module v2.4.1-1ubuntu5, ZFS pool version 5000, ZFS filesystem version 5
[ 178.534738] ZFS: Using ZFS with kernel 7.0.0-30-generic is EXPERIMENTAL and SERIOUS DATA LOSS may occur!
[ 178.534739] ZFS: Please report your results at: https://github.com/openzfs/zfs/issues/new
[ 178.569843] loop3: detected capacity change from 0 to 40880
[ 178.569909] loop4: detected capacity change from 0 to 136816
[ 178.569964] loop5: detected capacity change from 0 to 8
[ 178.570371] loop6: detected capacity change from 0 to 33792
[ 178.570445] loop7: detected capacity change from 0 to 533120
[ 178.596220] loop8: detected capacity change from 0 to 1258560
[ 178.611037] loop13: detected capacity change from 0 to 823256
[ 178.611061] loop9: detected capacity change from 0 to 187776
[ 178.611087] loop12: detected capacity change from 0 to 3088
[ 178.611233] loop11: detected capacity change from 0 to 24184
[ 179.787754] audit: type=1400 audit(1790158591.749:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.hwctl" pid=2657 comm="apparmor_parser"
[ 179.788925] audit: type=1400 audit(1790158591.750:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.ubuntu-desktop-bootstrap" pid=2663 comm="apparmor_parser"
[ 179.790055] audit: type=1400 audit(1790158591.751:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.mesa-2404" pid=2658 comm="apparmor_parser"
[ 179.919845] audit: type=1400 audit(1790158591.881:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/27710/usr/lib/snapd/snap-confine" pid=2653 comm="apparmor_parser"
[ 180.033935] audit: type=1400 audit(1790158591.995:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.install" pid=2670 comm="apparmor_parser"
[ 180.034474] audit: type=1400 audit(1790158591.996:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.disconnect-plug-host-hunspell" pid=2669 comm="apparmor_parser"
[ 180.042258] audit: type=1400 audit(1790158592.003:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.post-refresh" pid=2671 comm="apparmor_parser"
[ 180.126661] audit: type=1400 audit(1790158592.088:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.configure" pid=2668 comm="apparmor_parser"
[ 180.143616] audit: type=1400 audit(1790158592.105:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.desktop-security-center.hook.configure" pid=2665 comm="apparmor_parser"
[ 180.326471] audit: type=1400 audit(1790158592.288:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.hwctl.hook.configure" pid=2676 comm="apparmor_parser"
[ 188.207300] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 1644901525 wd_nsec: 1644890202
[ 188.264519] kauditd_printk_skb: 43 callbacks suppressed
[ 188.264523] audit: type=1400 audit(1790158600.226:55): apparmor="STATUS" operation="profile_load" profile="unconfined" name="rsyslogd" pid=2804 comm="apparmor_parser"
[ 189.114778] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 189.114782] Bluetooth: BNEP filters: protocol multicast
[ 189.114788] Bluetooth: BNEP socket layer initialized
[ 189.116009] Bluetooth: MGMT ver 1.23
[ 189.171604] NET: Registered PF_ALG protocol family
[ 189.478684] nvme nvme0: using unchecked data buffer
[ 189.492305] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 189.492382] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 189.492648] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 189.492661] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 189.502126] block nvme0n1: No UUID available providing old NGUID
[ 189.773141] set_capacity_and_notify: 5 callbacks suppressed
[ 189.773144] loop18: detected capacity change from 0 to 8
[ 189.869667] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 189.930061] audit: type=1400 audit(1790158601.891:56): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=3104 comm="apparmor_parser"
[ 190.085597] audit: type=1400 audit(1790158602.047:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/27710/usr/lib/snapd/snap-confine" pid=3120 comm="apparmor_parser"
[ 190.143006] audit: type=1400 audit(1790158602.104:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.hwctl" pid=3127 comm="apparmor_parser"
[ 190.225210] audit: type=1400 audit(1790158602.186:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.hwctl.hwctl" pid=3129 comm="apparmor_parser"
[ 190.227621] audit: type=1400 audit(1790158602.188:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.hwctl.hook.configure" pid=3128 comm="apparmor_parser"
[ 190.387122] audit: type=1400 audit(1790158602.348:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.hwctl.hwctl-daemon" pid=3130 comm="apparmor_parser"
[ 190.416827] audit: type=1400 audit(1790158602.378:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.prompting-client.hook.configure" pid=3134 comm="apparmor_parser"
[ 190.420254] audit: type=1400 audit(1790158602.381:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.hook.configure" pid=3123 comm="apparmor_parser"
[ 190.430216] audit: type=1400 audit(1790158602.391:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.ubuntu-desktop-bootstrap" pid=3140 comm="apparmor_parser"
[ 193.020419] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 203.167249] kauditd_printk_skb: 45 callbacks suppressed
[ 203.167256] audit: type=1400 audit(1790158615.128:110): apparmor="DENIED" operation="open" class="file" profile="snap.thunderbird.hook.install" name="/var/lib/snapd/hostfs/usr/share/hunspell/" pid=3935 comm="find" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 208.874293] Bluetooth: RFCOMM TTY layer initialized
[ 208.874314] Bluetooth: RFCOMM socket layer initialized
[ 208.874320] Bluetooth: RFCOMM ver 1.11
[ 214.494529] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 214.494565] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 215.211509] rfkill: input handler disabled
[ 219.684260] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 225.232576] block mmcblk0: the capability attribute has been deprecated.
[ 225.474716] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 225.513623] JFS: nTxBlock = 8192, nTxLock = 65536
[ 225.574524] QNX4 filesystem 0.2.3 registered.
[ 225.693306] Btrfs loaded, zoned=yes, fsverity=yes
[ 237.203010] systemd-journald[1356]: Under memory pressure, flushing caches.
[ 300.030000] ntfs3: Enabled Linux POSIX ACLs support
[ 300.030005] ntfs3: Read-only LZX/Xpress compression included
[ 416.730081] thunderbolt 0000:6b:00.6: control channel starting...
[ 416.730099] thunderbolt 0000:6b:00.6: starting TX ring 0
[ 416.730120] thunderbolt 0000:6b:00.6: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[ 416.730129] thunderbolt 0000:6b:00.6: starting RX ring 0
[ 416.730141] thunderbolt 0000:6b:00.6: enabling interrupt at register 0x38200 bit 3 (0x1 -> 0x9)
[ 416.730156] thunderbolt 0000:6b:00.6: 0: resuming switch
[ 416.730163] thunderbolt 0000:6b:00.6: restoring Switch at 0x0 (depth: 0, up port: 1)
[ 416.730412] thunderbolt 0000:6b:00.6: 0: disabling wakeup
[ 416.730483] thunderbolt 0000:6b:00.6: acking hot plug event on 0:6
[ 416.730594] thunderbolt 0000:6b:00.6: acking hot plug event on 0:7
[ 416.732818] thunderbolt 0000:6b:00.6: 0: TMU: supports uni-directional mode
[ 416.732947] thunderbolt 0000:6b:00.6: 0: TMU: current mode: off
[ 416.732954] thunderbolt 0000:6b:00.6: 0: TMU: mode change off -> bi-directional, HiFi requested
[ 416.733470] thunderbolt 0000:6b:00.6: 0: TMU: mode set to: bi-directional, HiFi
[ 416.733871] thunderbolt 0000:6b:00.6: 0:6: DP IN resource available after hotplug
[ 416.733884] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 416.734029] thunderbolt 0000:6b:00.6: 0:6: DP IN available
[ 416.734041] thunderbolt 0000:6b:00.6: 0:6: no suitable DP OUT adapter available, not tunneling
[ 416.734162] thunderbolt 0000:6b:00.6: 0:7: DP IN resource available after hotplug
[ 416.734174] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 416.734288] thunderbolt 0000:6b:00.6: 0:6: DP IN available
[ 416.734299] thunderbolt 0000:6b:00.6: 0:6: no suitable DP OUT adapter available, not tunneling
[ 416.734393] thunderbolt 0000:6b:00.6: 0:7: DP IN available
[ 416.734399] thunderbolt 0000:6b:00.6: 0:7: no suitable DP OUT adapter available, not tunneling
[ 426.716052] thunderbolt 0000:6b:00.6: acking hot plug event on 0:2
[ 426.716096] thunderbolt 0000:6b:00.6: acking hot plug event on 0:3
[ 426.716160] thunderbolt 0000:6b:00.6: 0:2: hotplug: scanning
[ 426.716413] thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state: 2)
[ 426.716924] thunderbolt 0000:6b:00.6: current switch config:
[ 426.716936] thunderbolt 0000:6b:00.6: USB4 Switch: 8087:5786 (Revision: 132, TB Version: 64)
[ 426.716945] thunderbolt 0000:6b:00.6: Max Port Number: 23
[ 426.716951] thunderbolt 0000:6b:00.6: Config:
[ 426.716956] thunderbolt 0000:6b:00.6: Upstream Port Number: 1 Depth: 0 Route String: 0x0 Enabled: 0, PlugEventsDelay: 10ms
[ 426.716963] thunderbolt 0000:6b:00.6: unknown1: 0x0 unknown4: 0x0
[ 426.720045] thunderbolt 0000:6b:00.6: initializing Switch at 0x2 (depth: 1, up port: 1)
[ 426.720426] thunderbolt 0000:6b:00.6: 2: link: TBT
[ 426.720434] thunderbolt 0000:6b:00.6: 2: TBT3 support: yes, xHCI: yes
[ 426.721732] thunderbolt 0000:6b:00.6: 2: credit allocation parameters:
[ 426.721735] thunderbolt 0000:6b:00.6: 2: USB3: 20
[ 426.721737] thunderbolt 0000:6b:00.6: 2: DP AUX: 1
[ 426.721740] thunderbolt 0000:6b:00.6: 2: DP main: 6
[ 426.721742] thunderbolt 0000:6b:00.6: 2: PCIe: 76
[ 426.721744] thunderbolt 0000:6b:00.6: 2: unknown credit allocation index 0x0, skipping
[ 426.725777] thunderbolt 0000:6b:00.6: 2: DROM version: 1
[ 426.727732] thunderbolt 0000:6b:00.6: 2: uid: 0xb1e9510080878dfa
[ 426.729042] thunderbolt 0000:6b:00.6: Port 1: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 426.729048] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 426.729052] thunderbolt 0000:6b:00.6: Max counters: 4
[ 426.729055] thunderbolt 0000:6b:00.6: NFC Credits: 0x4a000000
[ 426.729058] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 426.730217] thunderbolt 0000:6b:00.6: Port 2: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 426.730223] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 426.730226] thunderbolt 0000:6b:00.6: Max counters: 0
[ 426.730229] thunderbolt 0000:6b:00.6: NFC Credits: 0xca000000
[ 426.730232] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 426.730467] thunderbolt 0000:6b:00.6: acking hot plug event on 2:13
[ 426.730603] thunderbolt 0000:6b:00.6: acking hot plug event on 2:2
[ 426.730734] thunderbolt 0000:6b:00.6: acking hot plug event on 2:14
[ 426.730864] thunderbolt 0000:6b:00.6: acking hot plug event on 2:16
[ 426.731525] thunderbolt 0000:6b:00.6: Port 3: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 426.731530] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 426.731534] thunderbolt 0000:6b:00.6: Max counters: 4
[ 426.731536] thunderbolt 0000:6b:00.6: NFC Credits: 0x8a000000
[ 426.731539] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 426.732691] thunderbolt 0000:6b:00.6: Port 4: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 426.732695] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 426.732699] thunderbolt 0000:6b:00.6: Max counters: 0
[ 426.732702] thunderbolt 0000:6b:00.6: NFC Credits: 0x8a000000
[ 426.732704] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 426.734003] thunderbolt 0000:6b:00.6: Port 5: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 426.734008] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 426.734011] thunderbolt 0000:6b:00.6: Max counters: 4
[ 426.734014] thunderbolt 0000:6b:00.6: NFC Credits: 0x8a000000
[ 426.734017] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 426.735179] thunderbolt 0000:6b:00.6: Port 6: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 426.735183] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 426.735187] thunderbolt 0000:6b:00.6: Max counters: 0
[ 426.735190] thunderbolt 0000:6b:00.6: NFC Credits: 0x8a000000
[ 426.735192] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 426.736484] thunderbolt 0000:6b:00.6: Port 7: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 426.736489] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 426.736492] thunderbolt 0000:6b:00.6: Max counters: 4
[ 426.736495] thunderbolt 0000:6b:00.6: NFC Credits: 0x8a000000
[ 426.736498] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 426.737659] thunderbolt 0000:6b:00.6: Port 8: 0:5780 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 426.737664] thunderbolt 0000:6b:00.6: Max hop id (in/out): 31/31
[ 426.737667] thunderbolt 0000:6b:00.6: Max counters: 0
[ 426.737670] thunderbolt 0000:6b:00.6: NFC Credits: 0x8a000000
[ 426.737673] thunderbolt 0000:6b:00.6: Credits (total/control): 160/2
[ 426.737921] thunderbolt 0000:6b:00.6: Port 9: 0:5780 (Revision: 0, TB Version: 1, Type: PCIe (0x100102))
[ 426.737926] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 426.737929] thunderbolt 0000:6b:00.6: Max counters: 2
[ 426.737932] thunderbolt 0000:6b:00.6: NFC Credits: 0x40800000
[ 426.737935] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 426.738182] thunderbolt 0000:6b:00.6: Port 10: 0:5780 (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 426.738187] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 426.738190] thunderbolt 0000:6b:00.6: Max counters: 2
[ 426.738193] thunderbolt 0000:6b:00.6: NFC Credits: 0x40800000
[ 426.738196] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 426.738697] thunderbolt 0000:6b:00.6: Port 11: 0:5780 (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0102))
[ 426.738702] thunderbolt 0000:6b:00.6: Max hop id (in/out): 9/9
[ 426.738705] thunderbolt 0000:6b:00.6: Max counters: 2
[ 426.738708] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 426.738711] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 426.739226] thunderbolt 0000:6b:00.6: Port 12: 0:5780 (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0102))
[ 426.739230] thunderbolt 0000:6b:00.6: Max hop id (in/out): 9/9
[ 426.739233] thunderbolt 0000:6b:00.6: Max counters: 2
[ 426.739236] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 426.739238] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 426.739242] thunderbolt 0000:6b:00.6: 2:13: disabled by eeprom
[ 426.739245] thunderbolt 0000:6b:00.6: 2:14: disabled by eeprom
[ 426.739360] thunderbolt 0000:6b:00.6: Port 15: not implemented
[ 426.739364] thunderbolt 0000:6b:00.6: 2:16: disabled by eeprom
[ 426.739617] thunderbolt 0000:6b:00.6: Port 17: 0:5780 (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 426.739622] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 426.739625] thunderbolt 0000:6b:00.6: Max counters: 2
[ 426.739627] thunderbolt 0000:6b:00.6: NFC Credits: 0x40800000
[ 426.739630] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 426.739878] thunderbolt 0000:6b:00.6: Port 18: 0:5780 (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 426.739883] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 426.739886] thunderbolt 0000:6b:00.6: Max counters: 2
[ 426.739888] thunderbolt 0000:6b:00.6: NFC Credits: 0x40800000
[ 426.739891] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 426.740397] thunderbolt 0000:6b:00.6: Port 19: 0:5780 (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0102))
[ 426.740401] thunderbolt 0000:6b:00.6: Max hop id (in/out): 9/9
[ 426.740404] thunderbolt 0000:6b:00.6: Max counters: 2
[ 426.740407] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 426.740410] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 426.740663] thunderbolt 0000:6b:00.6: Port 20: 0:5780 (Revision: 0, TB Version: 1, Type: USB (0x200102))
[ 426.740668] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 426.740671] thunderbolt 0000:6b:00.6: Max counters: 1
[ 426.740673] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 426.740676] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 426.740925] thunderbolt 0000:6b:00.6: Port 21: 0:5780 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[ 426.740929] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 426.740932] thunderbolt 0000:6b:00.6: Max counters: 1
[ 426.740935] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 426.740937] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 426.741186] thunderbolt 0000:6b:00.6: Port 22: 0:5780 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[ 426.741190] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 426.741193] thunderbolt 0000:6b:00.6: Max counters: 1
[ 426.741196] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 426.741199] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 426.741447] thunderbolt 0000:6b:00.6: Port 23: 0:5780 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[ 426.741452] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 426.741455] thunderbolt 0000:6b:00.6: Max counters: 1
[ 426.741457] thunderbolt 0000:6b:00.6: NFC Credits: 0x800000
[ 426.741460] thunderbolt 0000:6b:00.6: Credits (total/control): 8/0
[ 426.741464] thunderbolt 0000:6b:00.6: 2: running quirk_usb3_maximum_bandwidth [thunderbolt]
[ 426.741500] thunderbolt 0000:6b:00.6: 2:21: USB3 maximum bandwidth limited to 16376 Mb/s
[ 426.741503] thunderbolt 0000:6b:00.6: 2:22: USB3 maximum bandwidth limited to 16376 Mb/s
[ 426.741507] thunderbolt 0000:6b:00.6: 2:23: USB3 maximum bandwidth limited to 16376 Mb/s
[ 426.741706] thunderbolt 0000:6b:00.6: 2: current link speed 20.0 Gb/s
[ 426.741710] thunderbolt 0000:6b:00.6: 2: current link width symmetric, single lane
[ 426.742098] thunderbolt 0000:6b:00.6: 0:2: total credits changed 128 -> 128
[ 426.742229] thunderbolt 0000:6b:00.6: 0:3: total credits changed 128 -> 128
[ 426.742367] thunderbolt 0000:6b:00.6: 2: CLx: current mode: disabled
[ 426.749802] thunderbolt 0000:6b:00.6: 2: TMU: supports uni-directional mode
[ 426.749805] thunderbolt 0000:6b:00.6: 2: TMU: supports enhanced uni-directional mode
[ 426.750195] thunderbolt 0000:6b:00.6: 2: TMU: current mode: off
[ 426.752607] thunderbolt 0-2: new device found, vendor=0x1b device=0x11
[ 426.752611] thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
[ 426.754893] thunderbolt 0000:6b:00.6: 2: NVM version 56.81
[ 426.755540] thunderbolt 0000:6b:00.6: 0:3: is connected, link is up (state: 2)
[ 426.757885] thunderbolt 0000:6b:00.6: acking hot unplug event on 0:3
[ 426.757891] thunderbolt 0000:6b:00.6: acking hot unplug event on 2:2
[ 426.758282] thunderbolt 0000:6b:00.6: 0:3: total credits changed 128 -> 128
[ 426.758808] thunderbolt 0000:6b:00.6: 2: link width set to symmetric, dual lanes
[ 426.759848] thunderbolt 0000:6b:00.6: 0:2: reading NVM authentication status of retimers
[ 427.480696] thunderbolt 0-0:2.1: retimer NVM format of vendor 0x1da0 unknown
[ 427.480707] thunderbolt 0-0:2.1: NVM upgrade disabled
[ 427.480712] thunderbolt 0-0:2.1: new retimer found, vendor=0x1da0 device=0x8830
[ 427.480739] thunderbolt 0000:6b:00.6: 0:2: disabling sideband transactions
[ 427.581087] thunderbolt 0000:6b:00.6: 2: TMU: mode change off -> bi-directional, HiFi requested
[ 427.581215] thunderbolt 0000:6b:00.6: 0: TMU: local_time[0]=0x13cf6e52
[ 427.581219] thunderbolt 0000:6b:00.6: 0: TMU: local_time[1]=0x00028763
[ 427.581223] thunderbolt 0000:6b:00.6: 0: TMU: local_time[2]=0x00100000
[ 427.582021] thunderbolt 0000:6b:00.6: 2: TMU: updated local time to 0x2876313cf
[ 427.583820] thunderbolt 0000:6b:00.6: 2: TMU: mode set to: bi-directional, HiFi
[ 427.586291] thunderbolt 0000:6b:00.6: 2:1: reading NVM authentication status of retimers
[ 428.307287] thunderbolt 0-2:1.1: retimer NVM format of vendor 0x1da0 unknown
[ 428.307293] thunderbolt 0-2:1.1: NVM upgrade disabled
[ 428.307297] thunderbolt 0-2:1.1: new retimer found, vendor=0x1da0 device=0x8830
[ 428.307317] thunderbolt 0000:6b:00.6: 2:1: disabling sideband transactions
[ 428.409374] thunderbolt 0000:6b:00.6: 2:3: is unplugged (state: 7)
[ 428.409508] thunderbolt 0000:6b:00.6: 2:5: is unplugged (state: 7)
[ 428.409638] thunderbolt 0000:6b:00.6: 2:7: is unplugged (state: 7)
[ 428.410164] thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
[ 428.410168] thunderbolt 0000:6b:00.6: activating PCIe Down path from 0:5 to 2:9
[ 428.410289] thunderbolt 0000:6b:00.6: 2:1: Writing hop 1
[ 428.410291] thunderbolt 0000:6b:00.6: 2:1: In HopID: 8 => Out port: 9 Out HopID: 8
[ 428.410293] thunderbolt 0000:6b:00.6: 2:1: Weight: 1 Priority: 3 Credits: 76 Drop: 0 PM: 0
[ 428.410295] thunderbolt 0000:6b:00.6: 2:1: Counter enabled: 0 Counter index: 2047
[ 428.410297] thunderbolt 0000:6b:00.6: 2:1: Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[ 428.410298] thunderbolt 0000:6b:00.6: 2:1: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 428.410548] thunderbolt 0000:6b:00.6: 0:5: Writing hop 0
[ 428.410550] thunderbolt 0000:6b:00.6: 0:5: In HopID: 8 => Out port: 2 Out HopID: 8
[ 428.410552] thunderbolt 0000:6b:00.6: 0:5: Weight: 1 Priority: 3 Credits: 7 Drop: 0 PM: 0
[ 428.410554] thunderbolt 0000:6b:00.6: 0:5: Counter enabled: 0 Counter index: 2047
[ 428.410555] thunderbolt 0000:6b:00.6: 0:5: Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[ 428.410557] thunderbolt 0000:6b:00.6: 0:5: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 428.410680] thunderbolt 0000:6b:00.6: PCIe Down path activation complete
[ 428.410682] thunderbolt 0000:6b:00.6: activating PCIe Up path from 2:9 to 0:5
[ 428.410811] thunderbolt 0000:6b:00.6: 0:2: Writing hop 1
[ 428.410813] thunderbolt 0000:6b:00.6: 0:2: In HopID: 8 => Out port: 5 Out HopID: 8
[ 428.410814] thunderbolt 0000:6b:00.6: 0:2: Weight: 1 Priority: 3 Credits: 32 Drop: 0 PM: 0
[ 428.410816] thunderbolt 0000:6b:00.6: 0:2: Counter enabled: 0 Counter index: 2047
[ 428.410818] thunderbolt 0000:6b:00.6: 0:2: Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[ 428.410819] thunderbolt 0000:6b:00.6: 0:2: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 428.411071] thunderbolt 0000:6b:00.6: 2:9: Writing hop 0
[ 428.411073] thunderbolt 0000:6b:00.6: 2:9: In HopID: 8 => Out port: 1 Out HopID: 8
[ 428.411075] thunderbolt 0000:6b:00.6: 2:9: Weight: 1 Priority: 3 Credits: 7 Drop: 0 PM: 0
[ 428.411076] thunderbolt 0000:6b:00.6: 2:9: Counter enabled: 0 Counter index: 2047
[ 428.411078] thunderbolt 0000:6b:00.6: 2:9: Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[ 428.411079] thunderbolt 0000:6b:00.6: 2:9: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 428.411202] thunderbolt 0000:6b:00.6: PCIe Up path activation complete
[ 428.411488] thunderbolt 0000:6b:00.6: 0:3: got plug event for connected port, ignoring
[ 428.411498] thunderbolt 0000:6b:00.6: hotplug event for upstream port 2:2 (unplug: 0)
[ 428.411506] thunderbolt 0000:6b:00.6: 0:3: got unplug event for disconnected port, ignoring
[ 428.411511] thunderbolt 0000:6b:00.6: hotplug event for upstream port 2:2 (unplug: 1)
[ 429.025848] pcieport 0000:00:04.1: pciehp: Slot(0-1): Card present
[ 429.025861] pcieport 0000:00:04.1: pciehp: Slot(0-1): Link Up
[ 429.025863] pci 0000:09:00.0: [8086:5786] type 01 class 0x060400 PCIe Switch Upstream Port
[ 429.025916] pci 0000:09:00.0: PCI bridge to [bus 00]
[ 429.025935] pci 0000:09:00.0: bridge window [io 0x0000-0x0fff]
[ 429.025945] pci 0000:09:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 429.025966] pci 0000:09:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 429.025990] pci 0000:09:00.0: enabling Extended Tags
[ 429.026164] pci 0000:09:00.0: supports D1 D2
[ 429.026170] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 429.027095] pci 0000:09:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:04.1 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 429.027332] pci 0000:09:00.0: Adding to iommu group 7
[ 429.029396] pci 0000:09:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 429.029595] pci 0000:0a:00.0: [8086:5786] type 01 class 0x060400 PCIe Switch Downstream Port
[ 429.029631] pci 0000:0a:00.0: PCI bridge to [bus 00]
[ 429.029641] pci 0000:0a:00.0: bridge window [io 0x0000-0x0fff]
[ 429.029646] pci 0000:0a:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 429.029661] pci 0000:0a:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 429.029680] pci 0000:0a:00.0: enabling Extended Tags
[ 429.029877] pci 0000:0a:00.0: supports D1 D2
[ 429.029883] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 429.030398] pci 0000:0a:00.0: Adding to iommu group 7
[ 429.030555] pci 0000:0a:01.0: [8086:5786] type 01 class 0x060400 PCIe Switch Downstream Port
[ 429.030602] pci 0000:0a:01.0: PCI bridge to [bus 00]
[ 429.030617] pci 0000:0a:01.0: bridge window [io 0x0000-0x0fff]
[ 429.030627] pci 0000:0a:01.0: bridge window [mem 0x00000000-0x000fffff]
[ 429.030647] pci 0000:0a:01.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 429.030672] pci 0000:0a:01.0: enabling Extended Tags
[ 429.030841] pci 0000:0a:01.0: supports D1 D2
[ 429.030846] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 429.031127] pci 0000:0a:01.0: Adding to iommu group 7
[ 429.031224] pci 0000:0a:02.0: [8086:5786] type 01 class 0x060400 PCIe Switch Downstream Port
[ 429.031258] pci 0000:0a:02.0: PCI bridge to [bus 00]
[ 429.031267] pci 0000:0a:02.0: bridge window [io 0x0000-0x0fff]
[ 429.031272] pci 0000:0a:02.0: bridge window [mem 0x00000000-0x000fffff]
[ 429.031287] pci 0000:0a:02.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 429.031305] pci 0000:0a:02.0: enabling Extended Tags
[ 429.031464] pci 0000:0a:02.0: supports D1 D2
[ 429.031467] pci 0000:0a:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 429.031762] pci 0000:0a:02.0: Adding to iommu group 7
[ 429.031857] pci 0000:0a:03.0: [8086:5786] type 01 class 0x060400 PCIe Switch Downstream Port
[ 429.031892] pci 0000:0a:03.0: PCI bridge to [bus 00]
[ 429.031901] pci 0000:0a:03.0: bridge window [io 0x0000-0x0fff]
[ 429.031906] pci 0000:0a:03.0: bridge window [mem 0x00000000-0x000fffff]
[ 429.031920] pci 0000:0a:03.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 429.031939] pci 0000:0a:03.0: enabling Extended Tags
[ 429.032080] pci 0000:0a:03.0: supports D1 D2
[ 429.032083] pci 0000:0a:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 429.032330] pci 0000:0a:03.0: Adding to iommu group 7
[ 429.032443] pci 0000:0a:04.0: [8086:5786] type 01 class 0x060400 PCIe Switch Downstream Port
[ 429.032479] pci 0000:0a:04.0: PCI bridge to [bus 00]
[ 429.032488] pci 0000:0a:04.0: bridge window [io 0x0000-0x0fff]
[ 429.032493] pci 0000:0a:04.0: bridge window [mem 0x00000000-0x000fffff]
[ 429.032507] pci 0000:0a:04.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 429.032528] pci 0000:0a:04.0: enabling Extended Tags
[ 429.032668] pci 0000:0a:04.0: supports D1 D2
[ 429.032671] pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 429.032926] pci 0000:0a:04.0: Adding to iommu group 7
[ 429.033008] pci 0000:09:00.0: PCI bridge to [bus 0a-68]
[ 429.033027] pci 0000:0a:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 429.033037] pci 0000:0a:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 429.033048] pci 0000:0a:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 429.033058] pci 0000:0a:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 429.033068] pci 0000:0a:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 429.033154] pci 0000:0a:00.0: PCI bridge to [bus 0b-68]
[ 429.033171] pci_bus 0000:0b: busn_res: [bus 0b-68] end is updated to 0b
[ 429.033306] pci 0000:0c:00.0: [8086:5787] type 00 class 0x0c0330 PCIe Endpoint
[ 429.033374] pci 0000:0c:00.0: BAR 0 [mem 0x00000000-0x0000ffff 64bit]
[ 429.033394] pci 0000:0c:00.0: enabling Extended Tags
[ 429.033490] pci 0000:0c:00.0: PME# supported from D3hot D3cold
[ 429.033540] pci 0000:0c:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:04.1 (capable of 8.000 Gb/s with 2.5 GT/s PCIe x4 link)
[ 429.033650] pci 0000:0c:00.0: Adding to iommu group 7
[ 429.033708] pci 0000:0a:01.0: PCI bridge to [bus 0c-68]
[ 429.033724] pci_bus 0000:0c: busn_res: [bus 0c-68] end is updated to 0c
[ 429.033800] pci 0000:0a:02.0: PCI bridge to [bus 0d-68]
[ 429.033816] pci_bus 0000:0d: busn_res: [bus 0d-68] end is updated to 2b
[ 429.033891] pci 0000:0a:03.0: PCI bridge to [bus 2c-68]
[ 429.033907] pci_bus 0000:2c: busn_res: [bus 2c-68] end is updated to 4a
[ 429.033980] pci 0000:0a:04.0: PCI bridge to [bus 4b-68]
[ 429.033996] pci_bus 0000:4b: busn_res: [bus 4b-68] end is updated to 68
[ 429.034003] pci_bus 0000:0a: busn_res: [bus 0a-68] end is updated to 68
[ 429.034069] pci 0000:0a:00.0: disabling bridge window [mem 0x00000000-0x000fffff 64bit pref] to [bus 0b] (unused)
[ 429.034072] pci 0000:0a:00.0: disabling bridge window [mem 0x00000000-0x000fffff] to [bus 0b] (unused)
[ 429.034075] pci 0000:0a:01.0: disabling bridge window [mem 0x00000000-0x000fffff 64bit pref] to [bus 0c] (unused)
[ 429.034078] pci 0000:0a:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0d-2b] add_size 200000 add_align 100000
[ 429.034082] pci 0000:0a:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0d-2b] add_size 200000 add_align 100000
[ 429.034085] pci 0000:0a:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 2c-4a] add_size 200000 add_align 100000
[ 429.034087] pci 0000:0a:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus 2c-4a] add_size 200000 add_align 100000
[ 429.034090] pci 0000:0a:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 4b-68] add_size 200000 add_align 100000
[ 429.034093] pci 0000:0a:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 4b-68] add_size 200000 add_align 100000
[ 429.034097] pci 0000:09:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a-68] add_size 600000 add_align 100000
[ 429.034101] pci 0000:09:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 0a-68] add_size 600000 add_align 100000
[ 429.034119] pci 0000:09:00.0: bridge window [mem 0xc4000000-0xc46fffff]: assigned
[ 429.034122] pci 0000:09:00.0: bridge window [mem 0x6c00000000-0x6c005fffff 64bit pref]: assigned
[ 429.034124] pci 0000:09:00.0: bridge window [io size 0x5000]: can't assign; no space
[ 429.034127] pci 0000:09:00.0: bridge window [io size 0x5000]: failed to assign
[ 429.034130] pci 0000:09:00.0: bridge window [io size 0x5000]: can't assign; no space
[ 429.034132] pci 0000:09:00.0: bridge window [io size 0x5000]: failed to assign
[ 429.034138] pci 0000:0a:01.0: bridge window [mem 0xc4000000-0xc40fffff]: assigned
[ 429.034141] pci 0000:0a:02.0: bridge window [mem 0xc4100000-0xc42fffff]: assigned
[ 429.034143] pci 0000:0a:02.0: bridge window [mem 0x6c00000000-0x6c001fffff 64bit pref]: assigned
[ 429.034146] pci 0000:0a:03.0: bridge window [mem 0xc4300000-0xc44fffff]: assigned
[ 429.034148] pci 0000:0a:03.0: bridge window [mem 0x6c00200000-0x6c003fffff 64bit pref]: assigned
[ 429.034150] pci 0000:0a:04.0: bridge window [mem 0xc4500000-0xc46fffff]: assigned
[ 429.034153] pci 0000:0a:04.0: bridge window [mem 0x6c00400000-0x6c005fffff 64bit pref]: assigned
[ 429.034155] pci 0000:0a:00.0: bridge window [io size 0x1000]: can't assign; no space
[ 429.034157] pci 0000:0a:00.0: bridge window [io size 0x1000]: failed to assign
[ 429.034159] pci 0000:0a:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 429.034161] pci 0000:0a:01.0: bridge window [io size 0x1000]: failed to assign
[ 429.034163] pci 0000:0a:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 429.034165] pci 0000:0a:02.0: bridge window [io size 0x1000]: failed to assign
[ 429.034167] pci 0000:0a:03.0: bridge window [io size 0x1000]: can't assign; no space
[ 429.034169] pci 0000:0a:03.0: bridge window [io size 0x1000]: failed to assign
[ 429.034171] pci 0000:0a:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 429.034173] pci 0000:0a:04.0: bridge window [io size 0x1000]: failed to assign
[ 429.034177] pci 0000:0a:00.0: bridge window [io size 0x1000]: can't assign; no space
[ 429.034179] pci 0000:0a:00.0: bridge window [io size 0x1000]: failed to assign
[ 429.034181] pci 0000:0a:01.0: bridge window [io size 0x1000]: can't assign; no space
[ 429.034182] pci 0000:0a:01.0: bridge window [io size 0x1000]: failed to assign
[ 429.034184] pci 0000:0a:02.0: bridge window [io size 0x1000]: can't assign; no space
[ 429.034186] pci 0000:0a:02.0: bridge window [io size 0x1000]: failed to assign
[ 429.034188] pci 0000:0a:03.0: bridge window [io size 0x1000]: can't assign; no space
[ 429.034190] pci 0000:0a:03.0: bridge window [io size 0x1000]: failed to assign
[ 429.034192] pci 0000:0a:04.0: bridge window [io size 0x1000]: can't assign; no space
[ 429.034194] pci 0000:0a:04.0: bridge window [io size 0x1000]: failed to assign
[ 429.034197] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[ 429.034217] pci 0000:0c:00.0: BAR 0 [mem 0xc4000000-0xc400ffff 64bit]: assigned
[ 429.034230] pci 0000:0a:01.0: PCI bridge to [bus 0c]
[ 429.034236] pci 0000:0a:01.0: bridge window [mem 0xc4000000-0xc40fffff]
[ 429.034247] pci 0000:0a:02.0: PCI bridge to [bus 0d-2b]
[ 429.034253] pci 0000:0a:02.0: bridge window [mem 0xc4100000-0xc42fffff]
[ 429.034258] pci 0000:0a:02.0: bridge window [mem 0x6c00000000-0x6c001fffff 64bit pref]
[ 429.034265] pci 0000:0a:03.0: PCI bridge to [bus 2c-4a]
[ 429.034271] pci 0000:0a:03.0: bridge window [mem 0xc4300000-0xc44fffff]
[ 429.034276] pci 0000:0a:03.0: bridge window [mem 0x6c00200000-0x6c003fffff 64bit pref]
[ 429.034284] pci 0000:0a:04.0: PCI bridge to [bus 4b-68]
[ 429.034290] pci 0000:0a:04.0: bridge window [mem 0xc4500000-0xc46fffff]
[ 429.034294] pci 0000:0a:04.0: bridge window [mem 0x6c00400000-0x6c005fffff 64bit pref]
[ 429.034302] pci 0000:09:00.0: PCI bridge to [bus 0a-68]
[ 429.034308] pci 0000:09:00.0: bridge window [mem 0xc4000000-0xc46fffff]
[ 429.034313] pci 0000:09:00.0: bridge window [mem 0x6c00000000-0x6c005fffff 64bit pref]
[ 429.034752] pcieport 0000:09:00.0: enabling device (0000 -> 0002)
[ 429.035453] pcieport 0000:0a:01.0: enabling device (0000 -> 0002)
[ 429.035728] pcieport 0000:0a:02.0: enabling device (0000 -> 0002)
[ 429.035877] pcieport 0000:0a:02.0: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 429.036246] pcieport 0000:0a:03.0: enabling device (0000 -> 0002)
[ 429.036411] pcieport 0000:0a:03.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 429.036704] pcieport 0000:0a:04.0: enabling device (0000 -> 0002)
[ 429.036860] pcieport 0000:0a:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 429.037049] pci 0000:0c:00.0: enabling device (0000 -> 0002)
[ 429.037173] xhci_hcd 0000:0c:00.0: xHCI Host Controller
[ 429.037179] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 9
[ 429.038378] xhci_hcd 0000:0c:00.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[ 429.038852] xhci_hcd 0000:0c:00.0: xHCI Host Controller
[ 429.038855] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 10
[ 429.038858] xhci_hcd 0000:0c:00.0: Host supports USB 3.2 Enhanced SuperSpeed
[ 429.038913] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00
[ 429.038916] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 429.038918] usb usb9: Product: xHCI Host Controller
[ 429.038919] usb usb9: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 429.038921] usb usb9: SerialNumber: 0000:0c:00.0
[ 429.040316] hub 9-0:1.0: USB hub found
[ 429.040337] hub 9-0:1.0: 2 ports detected
[ 429.040497] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00
[ 429.040499] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 429.040501] usb usb10: Product: xHCI Host Controller
[ 429.040503] usb usb10: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 429.040504] usb usb10: SerialNumber: 0000:0c:00.0
[ 429.040602] hub 10-0:1.0: USB hub found
[ 429.040616] hub 10-0:1.0: 2 ports detected
[ 429.274399] usb 9-1: new high-speed USB device number 2 using xhci_hcd
[ 429.397693] usb 9-1: New USB device found, idVendor=1d5c, idProduct=5801, bcdDevice= 1.01
[ 429.397702] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 429.397706] usb 9-1: Product: USB2.0 Hub
[ 429.397710] usb 9-1: Manufacturer: Fresco Logic, Inc.
[ 429.398687] hub 9-1:1.0: USB hub found
[ 429.398724] hub 9-1:1.0: 5 ports detected
[ 429.509437] usb 10-1: new SuperSpeed Plus Gen 2x2 USB device number 2 using xhci_hcd
[ 429.521038] usb 10-1: New USB device found, idVendor=8087, idProduct=5787, bcdDevice= 0.00
[ 429.521047] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 429.521051] usb 10-1: Product: USB3 HUB
[ 429.521055] usb 10-1: Manufacturer: Intel Corporation
[ 429.522035] hub 10-1:1.0: USB hub found
[ 429.522089] hub 10-1:1.0: 4 ports detected
[ 429.952992] usb 10-1.4: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd
[ 430.411328] usb 10-1.4: New USB device found, idVendor=047d, idProduct=8152, bcdDevice= 9.04
[ 430.411334] usb 10-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 430.411338] usb 10-1.4: Product: USB3.1 Hub
[ 430.411341] usb 10-1.4: Manufacturer: VIA Labs, Inc.
[ 430.413113] hub 10-1.4:1.0: USB hub found
[ 430.413441] hub 10-1.4:1.0: 4 ports detected
[ 430.482409] usb 9-1.4: new high-speed USB device number 3 using xhci_hcd
[ 430.603162] usb 9-1.4: New USB device found, idVendor=047d, idProduct=8151, bcdDevice= 9.04
[ 430.603171] usb 9-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 430.603174] usb 9-1.4: Product: USB2.0 Hub
[ 430.603176] usb 9-1.4: Manufacturer: VIA Labs, Inc.
[ 430.604211] hub 9-1.4:1.0: USB hub found
[ 430.604504] hub 9-1.4:1.0: 4 ports detected
[ 431.156563] thunderbolt 0000:6b:00.6: acking hot plug event on 2:12
[ 431.156877] thunderbolt 0000:6b:00.6: 2:12: DP OUT resource available after hotplug
[ 431.156899] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 431.157122] thunderbolt 0000:6b:00.6: 0:6: DP IN available
[ 431.157349] thunderbolt 0000:6b:00.6: 2:12: DP OUT available
[ 431.158215] thunderbolt 0000:6b:00.6: 0: allocated DP resource for port 6
[ 431.158221] thunderbolt 0000:6b:00.6: 0:6: attached to bandwidth group 1
[ 431.158611] thunderbolt 0000:6b:00.6: 0:2: link maximum bandwidth 36000/36000 Mb/s
[ 431.158871] thunderbolt 0000:6b:00.6: 2:1: link maximum bandwidth 36000/36000 Mb/s
[ 431.159002] thunderbolt 0000:6b:00.6: available bandwidth for new DP tunnel 36000/36000 Mb/s
[ 431.159020] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): activating
[ 431.159781] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): DP IN maximum supported bandwidth 8100 Mb/s x4 = 25920 Mb/s
[ 431.159785] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): DP OUT maximum supported bandwidth 8100 Mb/s x4 = 25920 Mb/s
[ 431.160045] thunderbolt 0000:6b:00.6: activating Video path from 0:6 to 2:12
[ 431.160079] thunderbolt 0000:6b:00.6: 2:1: adding 6 NFC credits to 0
[ 431.160305] thunderbolt 0000:6b:00.6: 2:1: Writing hop 1
[ 431.160310] thunderbolt 0000:6b:00.6: 2:1: In HopID: 9 => Out port: 12 Out HopID: 9
[ 431.160314] thunderbolt 0000:6b:00.6: 2:1: Weight: 1 Priority: 1 Credits: 0 Drop: 0 PM: 0
[ 431.160318] thunderbolt 0000:6b:00.6: 2:1: Counter enabled: 0 Counter index: 2047
[ 431.160322] thunderbolt 0000:6b:00.6: 2:1: Flow Control (In/Eg): 0/0 Shared Buffer (In/Eg): 0/0
[ 431.160326] thunderbolt 0000:6b:00.6: 2:1: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 431.160564] thunderbolt 0000:6b:00.6: 0:6: Writing hop 0
[ 431.160568] thunderbolt 0000:6b:00.6: 0:6: In HopID: 9 => Out port: 2 Out HopID: 9
[ 431.160572] thunderbolt 0000:6b:00.6: 0:6: Weight: 1 Priority: 1 Credits: 0 Drop: 0 PM: 0
[ 431.160576] thunderbolt 0000:6b:00.6: 0:6: Counter enabled: 0 Counter index: 2047
[ 431.160580] thunderbolt 0000:6b:00.6: 0:6: Flow Control (In/Eg): 0/0 Shared Buffer (In/Eg): 0/0
[ 431.160584] thunderbolt 0000:6b:00.6: 0:6: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 431.160697] thunderbolt 0000:6b:00.6: Video path activation complete
[ 431.160700] thunderbolt 0000:6b:00.6: activating AUX TX path from 0:6 to 2:12
[ 431.160827] thunderbolt 0000:6b:00.6: 2:1: Writing hop 1
[ 431.160831] thunderbolt 0000:6b:00.6: 2:1: In HopID: 10 => Out port: 12 Out HopID: 8
[ 431.160835] thunderbolt 0000:6b:00.6: 2:1: Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[ 431.160839] thunderbolt 0000:6b:00.6: 2:1: Counter enabled: 0 Counter index: 2047
[ 431.160842] thunderbolt 0000:6b:00.6: 2:1: Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[ 431.160846] thunderbolt 0000:6b:00.6: 2:1: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 431.161085] thunderbolt 0000:6b:00.6: 0:6: Writing hop 0
[ 431.161088] thunderbolt 0000:6b:00.6: 0:6: In HopID: 8 => Out port: 2 Out HopID: 10
[ 431.161090] thunderbolt 0000:6b:00.6: 0:6: Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[ 431.161093] thunderbolt 0000:6b:00.6: 0:6: Counter enabled: 0 Counter index: 2047
[ 431.161095] thunderbolt 0000:6b:00.6: 0:6: Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[ 431.161097] thunderbolt 0000:6b:00.6: 0:6: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 431.161216] thunderbolt 0000:6b:00.6: AUX TX path activation complete
[ 431.161218] thunderbolt 0000:6b:00.6: activating AUX RX path from 2:12 to 0:6
[ 431.161346] thunderbolt 0000:6b:00.6: 0:2: Writing hop 1
[ 431.161350] thunderbolt 0000:6b:00.6: 0:2: In HopID: 9 => Out port: 6 Out HopID: 8
[ 431.161352] thunderbolt 0000:6b:00.6: 0:2: Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[ 431.161355] thunderbolt 0000:6b:00.6: 0:2: Counter enabled: 0 Counter index: 2047
[ 431.161357] thunderbolt 0000:6b:00.6: 0:2: Flow Control (In/Eg): 1/0 Shared Buffer (In/Eg): 0/0
[ 431.161364] thunderbolt 0000:6b:00.6: 0:2: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 431.161609] thunderbolt 0000:6b:00.6: 2:12: Writing hop 0
[ 431.161611] thunderbolt 0000:6b:00.6: 2:12: In HopID: 8 => Out port: 1 Out HopID: 9
[ 431.161614] thunderbolt 0000:6b:00.6: 2:12: Weight: 1 Priority: 2 Credits: 1 Drop: 0 PM: 0
[ 431.161618] thunderbolt 0000:6b:00.6: 2:12: Counter enabled: 0 Counter index: 2047
[ 431.161621] thunderbolt 0000:6b:00.6: 2:12: Flow Control (In/Eg): 1/1 Shared Buffer (In/Eg): 0/0
[ 431.161625] thunderbolt 0000:6b:00.6: 2:12: Unknown1: 0x0 Unknown2: 0x0 Unknown3: 0x0
[ 431.161738] thunderbolt 0000:6b:00.6: AUX RX path activation complete
[ 431.162391] thunderbolt 0000:6b:00.6: 0:7: DP IN available
[ 431.162517] thunderbolt 0000:6b:00.6: 2:12: DP OUT in use
[ 431.162520] thunderbolt 0000:6b:00.6: 0:7: no suitable DP OUT adapter available, not tunneling
[ 431.162571] amdgpu 0000:69:00.0: [drm] DMUB HPD IRQ callback: link_index=7
[ 431.187668] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): DPRX read timeout
[ 431.238565] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): DPRX capabilities read completed
[ 431.238914] thunderbolt 0000:6b:00.6: 0:6 <-> 2:12 (DP): consumed bandwidth 0/25920 Mb/s
[ 431.238929] thunderbolt 0000:6b:00.6: bandwidth consumption changed, re-calculating estimated bandwidth
[ 431.238934] thunderbolt 0000:6b:00.6: re-calculating bandwidth estimation for group 1
[ 431.239040] thunderbolt 0000:6b:00.6: bandwidth estimation for group 1 done
[ 431.239045] thunderbolt 0000:6b:00.6: bandwidth re-calculation done
[ 431.429436] usb 9-1.5: new full-speed USB device number 4 using xhci_hcd
[ 431.517413] usb 9-1.5: New USB device found, idVendor=047d, idProduct=8155, bcdDevice= 0.01
[ 431.517426] usb 9-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 431.517430] usb 9-1.5: Product: SD5000T5 EQ Thunderbolt 5 Dock
[ 431.517433] usb 9-1.5: Manufacturer: Kensington
[ 431.517436] usb 9-1.5: SerialNumber: <USB_SERIAL_REDACTED>
[ 431.701398] usb 9-1.2: new full-speed USB device number 5 using xhci_hcd
[ 431.789001] usb 9-1.2: New USB device found, idVendor=1d5c, idProduct=7102, bcdDevice= 1.00
[ 431.789013] usb 9-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 431.789015] usb 9-1.2: Product: Generic Billboard Device
[ 431.789017] usb 9-1.2: Manufacturer: Fresco Logic, Inc
[ 431.854516] usb 10-1.4.1: new SuperSpeed USB device number 4 using xhci_hcd
[ 431.895468] usb 10-1.4.1: New USB device found, idVendor=047d, idProduct=8154, bcdDevice= 8.03
[ 431.895475] usb 10-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 431.895479] usb 10-1.4.1: Product: USB3.0 Hub
[ 431.895482] usb 10-1.4.1: Manufacturer: VIA Labs, Inc.
[ 431.896989] hub 10-1.4.1:1.0: USB hub found
[ 431.897176] hub 10-1.4.1:1.0: 4 ports detected
[ 431.967395] usb 9-1.4.1: new high-speed USB device number 6 using xhci_hcd
[ 432.084168] usb 9-1.4.1: New USB device found, idVendor=047d, idProduct=8153, bcdDevice= 8.03
[ 432.084185] usb 9-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 432.084190] usb 9-1.4.1: Product: USB2.0 Hub
[ 432.084195] usb 9-1.4.1: Manufacturer: VIA Labs, Inc.
[ 432.085882] hub 9-1.4.1:1.0: USB hub found
[ 432.086061] hub 9-1.4.1:1.0: 4 ports detected
[ 432.166565] usb 10-1.3: new SuperSpeed Plus Gen 2x1 USB device number 5 using xhci_hcd
[ 432.223125] usb 10-1.3: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=22.89
[ 432.223130] usb 10-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 432.223133] usb 10-1.3: Product: Realtek RTL9210C
[ 432.223136] usb 10-1.3: Manufacturer: RTL9210C
[ 432.223139] usb 10-1.3: SerialNumber: <USB_SERIAL_REDACTED>
[ 432.278338] usb 10-1.3: enable of device-initiated U1 failed.
[ 432.283057] usb 10-1.3: disable of device-initiated U1 failed.
[ 432.283364] usb 9-1.4.2: new high-speed USB device number 7 using xhci_hcd
[ 432.336600] usb 10-1.3: enable of device-initiated U1 failed.
[ 432.341164] scsi host1: uas
[ 432.369706] usb 9-1.4.2: New USB device found, idVendor=13d3, idProduct=5419, bcdDevice=19.21
[ 432.369716] usb 9-1.4.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 432.369721] usb 9-1.4.2: Product: Integrated Camera
[ 432.369724] usb 9-1.4.2: Manufacturer: Azurewave
[ 432.369727] usb 9-1.4.2: SerialNumber: 0000
[ 432.372902] uvcvideo 9-1.4.2:1.0: Found UVC 1.10 device Integrated Camera (13d3:5419)
[ 432.375502] uvcvideo 9-1.4.2:1.2: Found UVC 1.50 device Integrated Camera (13d3:5419)
[ 432.450397] usb 9-1.4.3: new high-speed USB device number 8 using xhci_hcd
[ 432.537700] usb 9-1.4.3: New USB device found, idVendor=045e, idProduct=02e6, bcdDevice= 1.00
[ 432.537709] usb 9-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 432.537712] usb 9-1.4.3: Product: XBOX ACC
[ 432.537715] usb 9-1.4.3: Manufacturer: MediaTek Inc.
[ 432.537717] usb 9-1.4.3: SerialNumber: 000000000
[ 432.570453] scsi 1:0:0:0: Direct-Access RTL9210C NVME SATA 10G 1.01 PQ: 0 ANSI: 6
[ 432.598412] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 432.599511] usb 10-1.4.1.4: new SuperSpeed USB device number 6 using xhci_hcd
[ 432.602447] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 432.603567] sd 1:0:0:0: [sdb] Write Protect is off
[ 432.603580] sd 1:0:0:0: [sdb] Mode Sense: 37 00 00 08
[ 432.605634] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 432.613822] usb 10-1.4.1.4: Int endpoint with wBytesPerInterval of 8 in config 2 interface 0 altsetting 0 ep 131: setting to 16
[ 432.613909] usb 10-1.4.1.4: Int endpoint with wBytesPerInterval of 8 in config 3 interface 0 altsetting 0 ep 131: setting to 16
[ 432.614069] usb 10-1.4.1.4: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=31.00
[ 432.614071] usb 10-1.4.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 432.614073] usb 10-1.4.1.4: Product: USB 10/100/1G/2.5G LAN
[ 432.614075] usb 10-1.4.1.4: Manufacturer: Realtek
[ 432.614076] usb 10-1.4.1.4: SerialNumber: <USB_SERIAL_REDACTED>
[ 432.686370] usb 9-1.4.4: new high-speed USB device number 9 using xhci_hcd
[ 432.689305] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 432.689310] sd 1:0:0:0: [sdb] Optimal transfer size 33553920 bytes
[ 432.744805] sdb: sdb1 sdb2 sdb3
[ 432.745181] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 432.749231] usbcore: registered new device driver r8152-cfgselector
[ 432.771019] usb 9-1.4.4: New USB device found, idVendor=0b05, idProduct=1ace, bcdDevice= 6.25
[ 432.771028] usb 9-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 432.771032] usb 9-1.4.4: Product: ROG OMNI RECEIVER
[ 432.771036] usb 9-1.4.4: Manufacturer: ASUSTek
[ 432.771039] usb 9-1.4.4: SerialNumber: <USB_SERIAL_REDACTED>
[ 432.778138] input: ASUSTek ROG OMNI RECEIVER Keyboard as /devices/pci0000:00/0000:00:04.1/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/usb9/9-1/9-1.4/9-1.4.4/9-1.4.4:1.0/0003:0B05:1ACE.000B/input/input51
[ 432.843369] usb 9-1.4.1.2: new high-speed USB device number 10 using xhci_hcd
[ 432.886537] hid-generic 0003:0B05:1ACE.000B: input,hidraw10: USB HID v1.11 Keyboard [ASUSTek ROG OMNI RECEIVER] on usb-0000:0c:00.0-1.4.4/input0
[ 432.887234] input: ASUSTek ROG OMNI RECEIVER as /devices/pci0000:00/0000:00:04.1/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/usb9/9-1/9-1.4/9-1.4.4/9-1.4.4:1.1/0003:0B05:1ACE.000C/input/input52
[ 432.887514] hid-generic 0003:0B05:1ACE.000C: input,hidraw11: USB HID v1.11 Mouse [ASUSTek ROG OMNI RECEIVER] on usb-0000:0c:00.0-1.4.4/input1
[ 432.888089] hid-generic 0003:0B05:1ACE.000D: hiddev4,hidraw12: USB HID v1.11 Device [ASUSTek ROG OMNI RECEIVER] on usb-0000:0c:00.0-1.4.4/input2
[ 432.888615] input: ASUSTek ROG OMNI RECEIVER Consumer Control as /devices/pci0000:00/0000:00:04.1/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/usb9/9-1/9-1.4/9-1.4.4/9-1.4.4:1.3/0003:0B05:1ACE.000E/input/input53
[ 432.939614] input: ASUSTek ROG OMNI RECEIVER System Control as /devices/pci0000:00/0000:00:04.1/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/usb9/9-1/9-1.4/9-1.4.4/9-1.4.4:1.3/0003:0B05:1ACE.000E/input/input54
[ 432.939793] input: ASUSTek ROG OMNI RECEIVER as /devices/pci0000:00/0000:00:04.1/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/usb9/9-1/9-1.4/9-1.4.4/9-1.4.4:1.3/0003:0B05:1ACE.000E/input/input55
[ 432.939926] input: ASUSTek ROG OMNI RECEIVER as /devices/pci0000:00/0000:00:04.1/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/usb9/9-1/9-1.4/9-1.4.4/9-1.4.4:1.3/0003:0B05:1ACE.000E/input/input56
[ 432.940092] input: ASUSTek ROG OMNI RECEIVER as /devices/pci0000:00/0000:00:04.1/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/usb9/9-1/9-1.4/9-1.4.4/9-1.4.4:1.3/0003:0B05:1ACE.000E/input/input57
[ 432.940318] hid-generic 0003:0B05:1ACE.000E: input,hiddev5,hidraw13: USB HID v1.11 Device [ASUSTek ROG OMNI RECEIVER] on usb-0000:0c:00.0-1.4.4/input3
[ 432.940483] usbhid 9-1.4.4:1.4: couldn't find an input interrupt endpoint
[ 433.039752] r8152-cfgselector 10-1.4.1.4: reset SuperSpeed USB device number 6 using xhci_hcd
[ 433.072871] usb 9-1.4.1.2: New USB device found, idVendor=0bda, idProduct=4e65, bcdDevice= 0.01
[ 433.072878] usb 9-1.4.1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 433.072881] usb 9-1.4.1.2: Product: USB Audio
[ 433.072882] usb 9-1.4.1.2: Manufacturer: Generic
[ 433.092508] input: Generic USB Audio Consumer Control as /devices/pci0000:00/0000:00:04.1/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/usb9/9-1/9-1.4/9-1.4.1/9-1.4.1.2/9-1.4.1.2:1.3/0003:0BDA:4E65.000F/input/input58
[ 433.111106] usbcore: registered new interface driver r8152
[ 433.117121] usbcore: registered new interface driver cdc_ether
[ 433.118689] usbcore: registered new interface driver cdc_ncm
[ 433.120975] usbcore: registered new interface driver cdc_wdm
[ 433.122751] usbcore: registered new interface driver cdc_mbim
[ 433.124766] usb 9-1.4.3: reset high-speed USB device number 8 using xhci_hcd
[ 433.143855] input: Generic USB Audio as /devices/pci0000:00/0000:00:04.1/0000:09:00.0/0000:0a:01.0/0000:0c:00.0/usb9/9-1/9-1.4/9-1.4.1/9-1.4.1.2/9-1.4.1.2:1.3/0003:0BDA:4E65.000F/input/input59
[ 433.144071] hid-generic 0003:0BDA:4E65.000F: input,hiddev6,hidraw14: USB HID v1.11 Device [Generic USB Audio] on usb-0000:0c:00.0-1.4.1.2/input3
[ 433.215525] mt76x2u 9-1.4.3:1.0: ASIC revision: 76320044
[ 433.231119] r8152 10-1.4.1.4:1.0 enx<ETHERNET_MAC_REDACTED>: renamed from eth0
[ 433.242667] mt76x2u 9-1.4.3:1.0: ROM patch build: 20141115060606a
[ 433.412011] mt76x2u 9-1.4.3:1.0: Firmware Version: 0.0.00
[ 433.412021] mt76x2u 9-1.4.3:1.0: Build: 1
[ 433.412022] mt76x2u 9-1.4.3:1.0: Build Time: 201507311614____
[ 433.468927] usbcore: registered new interface driver snd-usb-audio
[ 433.577125] mt76x2u 9-1.4.3:1.0: error: MCU resp evt:9 seq:1-0
[ 433.577158] mt76x2u 9-1.4.3:1.0: error: MCU resp evt:9 seq:1-0
[ 433.577198] mt76x2u 9-1.4.3:1.0: error: MCU resp evt:9 seq:1-0
[ 434.096565] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 434.097659] usbcore: registered new interface driver mt76x2u
[ 434.122519] mt76x2u 9-1.4.3:1.0 wlx<WIFI_MAC_REDACTED>: renamed from wlan0
[ 436.820271] r8152 10-1.4.1.4:1.0 enx<ETHERNET_MAC_REDACTED>: carrier on
[-- Attachment #3: ubuntu70-usb4-dmesg-before-hotplug-sanitized.txt --]
[-- Type: text/plain, Size: 129552 bytes --]
[ 0.000000] Linux version 7.0.0-30-generic (buildd@lcy02-amd64-048) (x86_64-linux-gnu-gcc (Ubuntu 15.2.0-16ubuntu1) 15.2.0, GNU ld (GNU Binutils for Ubuntu) 2.46) #30-Ubuntu SMP PREEMPT_DYNAMIC Fri Jul 31 18:22:54 UTC 2026 (Ubuntu 7.0.0-30.30-generic 7.0.12)
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz thunderbolt.dyndbg=+p --- quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] System RAM
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] device reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009a7efff] System RAM
[ 0.000000] BIOS-e820: [mem 0x0000000009a7f000-0x0000000009ffffff] device reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] System RAM
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a23bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a23c000-0x00000000ae2fefff] System RAM
[ 0.000000] BIOS-e820: [mem 0x00000000ae2ff000-0x00000000b10fefff] device reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b10ff000-0x00000000b11fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b11ff000-0x00000000b66fefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b66ff000-0x00000000badfefff] device reserved
[ 0.000000] BIOS-e820: [mem 0x00000000badff000-0x00000000bbff8fff] System RAM
[ 0.000000] BIOS-e820: [mem 0x00000000bbff9000-0x00000000bbffcfff] device reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bbffd000-0x00000000bbffefff] System RAM
[ 0.000000] BIOS-e820: [mem 0x00000000bbfff000-0x00000000bcffffff] device reserved
[ 0.000000] BIOS-e820: [gap 0x00000000bd000000-0x00000000bd78ffff]
[ 0.000000] BIOS-e820: [mem 0x00000000bd790000-0x00000000bd7effff] device reserved
[ 0.000000] BIOS-e820: [gap 0x00000000bd7f0000-0x00000000bd7f4fff]
[ 0.000000] BIOS-e820: [mem 0x00000000bd7f5000-0x00000000bfffffff] device reserved
[ 0.000000] BIOS-e820: [gap 0x00000000c0000000-0x00000000dfffffff]
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] device reserved
[ 0.000000] BIOS-e820: [gap 0x00000000f0000000-0x00000000fcffffff]
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] device reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e2fffff] System RAM
[ 0.000000] BIOS-e820: [gap 0x000000041e300000-0x000000041f33ffff]
[ 0.000000] BIOS-e820: [mem 0x000000041f340000-0x00000004601fffff] device reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] efi: EFI v2.8 by American Megatrends
[ 0.000000] efi: ACPI=0xb11fe000 ACPI 2.0=0xb11fe014 TPMFinalLog=0xb66b1000 SMBIOS=0xbaa79000 SMBIOS 3.0=0xbaa78000 MEMATTR=0xa8968018 ESRT=0xacfce198 MOKvar=0xbaad9000 INITRD=0xa67b3598 RNG=0xb118d018 TPMEventLog=0xb1187018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem66: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] device reserved
[ 0.000000] efi: Remove mem67: MMIO range=[0xfd000000-0xfedfffff] (30MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd000000-0xfedfffff] device reserved
[ 0.000000] efi: Not removing mem68: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem69: MMIO range=[0xfee01000-0xffffffff] (17MB) from e820 map
[ 0.000000] e820: remove [mem 0xfee01000-0xffffffff] device reserved
[ 0.000000] efi: Remove mem71: MMIO range=[0x440000000-0x4601fffff] (514MB) from e820 map
[ 0.000000] e820: remove [mem 0x440000000-0x4601fffff] device reserved
[ 0.000000] SMBIOS 3.5.0 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. ROG Flow X13 GV302XV_GV302XV/GV302XV, BIOS GV302XV.319 02/20/2025
[ 0.000000] DMI: Memory slots populated: 4/4
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3992.676 MHz processor
[ 0.000072] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved
[ 0.000073] e820: remove [mem 0x000a0000-0x000fffff] System RAM
[ 0.000078] last_pfn = 0x41e300 max_arch_pfn = 0x400000000
[ 0.000083] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
[ 0.000085] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000249] e820: update [mem 0xc0000000-0xffffffff] System RAM ==> device reserved
[ 0.000256] last_pfn = 0xbbfff max_arch_pfn = 0x400000000
[ 0.002763] esrt: Reserving ESRT space from 0x00000000acfce198 to 0x00000000acfce1d0.
[ 0.002769] e820: update [mem 0xacfce000-0xacfcefff] System RAM ==> device reserved
[ 0.002780] Using GB pages for direct mapping
[ 0.002994] secureboot: Secure boot disabled
[ 0.002994] RAMDISK: [mem 0x96628000-0x9c138fff]
[ 0.003320] ACPI: Early table checksum verification disabled
[ 0.003323] ACPI: RSDP 0x00000000B11FE014 000024 (v02 ALASKA)
[ 0.003327] ACPI: XSDT 0x00000000B11FD728 000174 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003331] ACPI: FACP 0x00000000B11F1000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.003334] ACPI: DSDT 0x00000000B11DE000 012842 (v02 ALASKA A M I 01072009 INTL 20200717)
[ 0.003335] ACPI: FACS 0x00000000B249E000 000040
[ 0.003336] ACPI: MSDM 0x00000000B11FC000 000055 (v03 ALASKA A M I 01072009 ASUS 00000001)
[ 0.003338] ACPI: SSDT 0x00000000B11F3000 008416 (v02 AMD AmdTable 00000002 MSFT 02000002)
[ 0.003339] ACPI: SSDT 0x00000000B11F2000 000221 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.003340] ACPI: FIDT 0x00000000B11DD000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003342] ACPI: ECDT 0x00000000B11DC000 0000C1 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.003343] ACPI: MCFG 0x00000000B11DB000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.003344] ACPI: HPET 0x00000000B11DA000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.003345] ACPI: FPDT 0x00000000B11D9000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.003346] ACPI: VFCT 0x00000000B11D4000 004284 (v01 ALASKA A M I 00000001 AMD 33504F47)
[ 0.003348] ACPI: SSDT 0x00000000B11CE000 00547E (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003349] ACPI: CRAT 0x00000000B11CD000 000EE8 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003350] ACPI: CDIT 0x00000000B11CC000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003351] ACPI: TPM2 0x00000000B11CA000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
[ 0.003352] ACPI: BGRT 0x00000000B11CB000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003353] ACPI: SSDT 0x00000000B11C8000 0015C8 (v02 AMD CPMDFIG2 00000001 INTL 20200717)
[ 0.003355] ACPI: SSDT 0x00000000B11C5000 0028E1 (v02 AMD CDFAAIG2 00000001 INTL 20200717)
[ 0.003356] ACPI: SSDT 0x00000000B11C4000 000024 (v02 AMD CPMDFDG1 00000001 INTL 20200717)
[ 0.003357] ACPI: SSDT 0x00000000B11BE000 0059A9 (v02 AMD CPMD3CLD 00000001 INTL 20200717)
[ 0.003358] ACPI: SSDT 0x00000000B11BD000 000935 (v02 AMD CPMWLRC 00000001 INTL 20200717)
[ 0.003359] ACPI: SSDT 0x00000000B11BC000 0009DC (v02 AMD OEMACP 00000001 INTL 20200717)
[ 0.003360] ACPI: SSDT 0x00000000B11BB000 00063C (v02 AMD OEMPMF 00000001 INTL 20200717)
[ 0.003362] ACPI: SDEV 0x00000000B11BA000 000144 (v01 00000000 AMI 00000000)
[ 0.003363] ACPI: SSDT 0x00000000B11B0000 009894 (v02 AMD CPMCMN 00000001 INTL 20200717)
[ 0.003364] ACPI: WSMT 0x00000000B11AF000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.003365] ACPI: APIC 0x00000000B11AE000 0000E8 (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.003366] ACPI: SSDT 0x00000000B11AC000 001D35 (v02 AMD AOD 00000001 INTL 20200717)
[ 0.003367] ACPI: IVRS 0x00000000B11AB000 0001A4 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003369] ACPI: SSDT 0x00000000B11AA000 000956 (v02 AMD CPMMSOSC 00000001 INTL 20200717)
[ 0.003370] ACPI: SSDT 0x00000000B11A9000 000EAD (v02 AMD CPMACPV5 00000001 INTL 20200717)
[ 0.003371] ACPI: SSDT 0x00000000B11A8000 0007DD (v02 AMD THERMAL0 00000001 INTL 20200717)
[ 0.003372] ACPI: SSDT 0x00000000B11A7000 000FF7 (v02 AMD GPP_PME_ 00000001 INTL 20200717)
[ 0.003373] ACPI: SSDT 0x00000000B119D000 0097E3 (v02 AMD INTGPP03 00000001 INTL 20200717)
[ 0.003374] ACPI: SSDT 0x00000000B1198000 004FEB (v02 AMD INTGPP01 00000001 INTL 20200717)
[ 0.003376] ACPI: SSDT 0x00000000B1197000 0009FE (v02 AMD CPMGPIO0 00000001 INTL 20200717)
[ 0.003377] ACPI: SSDT 0x00000000B1196000 00008D (v02 AMD CPMMSLPI 00000001 INTL 20200717)
[ 0.003378] ACPI: SSDT 0x00000000B1195000 000501 (v02 AMD CPMSFAML 00000001 INTL 20200717)
[ 0.003379] ACPI: SSDT 0x00000000B1193000 001156 (v01 AMD CPMUCSI 00000001 INTL 20200717)
[ 0.003380] ACPI: SSDT 0x00000000B1192000 000CE0 (v02 AMD WwanSsdt 00000001 INTL 20200717)
[ 0.003381] ACPI: SSDT 0x00000000B1191000 000747 (v02 AMD NVME 00000001 INTL 20200717)
[ 0.003382] ACPI: SSDT 0x00000000B1190000 000C88 (v02 AMD GpMsSsdt 00000001 INTL 20200717)
[ 0.003384] ACPI: SSDT 0x00000000B118E000 001450 (v02 AMD UPEP 00000001 INTL 20200717)
[ 0.003385] ACPI: Reserving FACP table memory at [mem 0xb11f1000-0xb11f1113]
[ 0.003385] ACPI: Reserving DSDT table memory at [mem 0xb11de000-0xb11f0841]
[ 0.003386] ACPI: Reserving FACS table memory at [mem 0xb249e000-0xb249e03f]
[ 0.003386] ACPI: Reserving MSDM table memory at [mem 0xb11fc000-0xb11fc054]
[ 0.003386] ACPI: Reserving SSDT table memory at [mem 0xb11f3000-0xb11fb415]
[ 0.003387] ACPI: Reserving SSDT table memory at [mem 0xb11f2000-0xb11f2220]
[ 0.003387] ACPI: Reserving FIDT table memory at [mem 0xb11dd000-0xb11dd09b]
[ 0.003387] ACPI: Reserving ECDT table memory at [mem 0xb11dc000-0xb11dc0c0]
[ 0.003388] ACPI: Reserving MCFG table memory at [mem 0xb11db000-0xb11db03b]
[ 0.003388] ACPI: Reserving HPET table memory at [mem 0xb11da000-0xb11da037]
[ 0.003388] ACPI: Reserving FPDT table memory at [mem 0xb11d9000-0xb11d9043]
[ 0.003389] ACPI: Reserving VFCT table memory at [mem 0xb11d4000-0xb11d8283]
[ 0.003389] ACPI: Reserving SSDT table memory at [mem 0xb11ce000-0xb11d347d]
[ 0.003389] ACPI: Reserving CRAT table memory at [mem 0xb11cd000-0xb11cdee7]
[ 0.003390] ACPI: Reserving CDIT table memory at [mem 0xb11cc000-0xb11cc028]
[ 0.003390] ACPI: Reserving TPM2 table memory at [mem 0xb11ca000-0xb11ca04b]
[ 0.003390] ACPI: Reserving BGRT table memory at [mem 0xb11cb000-0xb11cb037]
[ 0.003391] ACPI: Reserving SSDT table memory at [mem 0xb11c8000-0xb11c95c7]
[ 0.003391] ACPI: Reserving SSDT table memory at [mem 0xb11c5000-0xb11c78e0]
[ 0.003391] ACPI: Reserving SSDT table memory at [mem 0xb11c4000-0xb11c4023]
[ 0.003391] ACPI: Reserving SSDT table memory at [mem 0xb11be000-0xb11c39a8]
[ 0.003392] ACPI: Reserving SSDT table memory at [mem 0xb11bd000-0xb11bd934]
[ 0.003392] ACPI: Reserving SSDT table memory at [mem 0xb11bc000-0xb11bc9db]
[ 0.003392] ACPI: Reserving SSDT table memory at [mem 0xb11bb000-0xb11bb63b]
[ 0.003393] ACPI: Reserving SDEV table memory at [mem 0xb11ba000-0xb11ba143]
[ 0.003393] ACPI: Reserving SSDT table memory at [mem 0xb11b0000-0xb11b9893]
[ 0.003393] ACPI: Reserving WSMT table memory at [mem 0xb11af000-0xb11af027]
[ 0.003394] ACPI: Reserving APIC table memory at [mem 0xb11ae000-0xb11ae0e7]
[ 0.003394] ACPI: Reserving SSDT table memory at [mem 0xb11ac000-0xb11add34]
[ 0.003394] ACPI: Reserving IVRS table memory at [mem 0xb11ab000-0xb11ab1a3]
[ 0.003395] ACPI: Reserving SSDT table memory at [mem 0xb11aa000-0xb11aa955]
[ 0.003395] ACPI: Reserving SSDT table memory at [mem 0xb11a9000-0xb11a9eac]
[ 0.003395] ACPI: Reserving SSDT table memory at [mem 0xb11a8000-0xb11a87dc]
[ 0.003396] ACPI: Reserving SSDT table memory at [mem 0xb11a7000-0xb11a7ff6]
[ 0.003396] ACPI: Reserving SSDT table memory at [mem 0xb119d000-0xb11a67e2]
[ 0.003396] ACPI: Reserving SSDT table memory at [mem 0xb1198000-0xb119cfea]
[ 0.003397] ACPI: Reserving SSDT table memory at [mem 0xb1197000-0xb11979fd]
[ 0.003397] ACPI: Reserving SSDT table memory at [mem 0xb1196000-0xb119608c]
[ 0.003397] ACPI: Reserving SSDT table memory at [mem 0xb1195000-0xb1195500]
[ 0.003398] ACPI: Reserving SSDT table memory at [mem 0xb1193000-0xb1194155]
[ 0.003398] ACPI: Reserving SSDT table memory at [mem 0xb1192000-0xb1192cdf]
[ 0.003398] ACPI: Reserving SSDT table memory at [mem 0xb1191000-0xb1191746]
[ 0.003399] ACPI: Reserving SSDT table memory at [mem 0xb1190000-0xb1190c87]
[ 0.003399] ACPI: Reserving SSDT table memory at [mem 0xb118e000-0xb118f44f]
[ 0.003520] No NUMA configuration found
[ 0.003520] Faking a node at [mem 0x0000000000000000-0x000000041e2fffff]
[ 0.003527] NODE_DATA(0) allocated [mem 0x41e2d5280-0x41e2fffff]
[ 0.003924] ACPI: PM-Timer IO Port: 0x808
[ 0.003928] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.003943] IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
[ 0.003949] IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
[ 0.003950] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.003952] ACPI: INT_SRC_OVR (bus 0 bus_irq 1 global_irq 1 low edge)
[ 0.003952] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.003954] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.003955] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.003959] e820: update [mem 0xa8f84000-0xa902cfff] System RAM ==> device reserved
[ 0.003966] CPU topo: Max. logical packages: 1
[ 0.003966] CPU topo: Max. logical nodes: 1
[ 0.003966] CPU topo: Num. nodes per package: 1
[ 0.003968] CPU topo: Max. logical dies: 1
[ 0.003968] CPU topo: Max. dies per package: 1
[ 0.003970] CPU topo: Max. threads per core: 2
[ 0.003970] CPU topo: Num. cores per package: 8
[ 0.003971] CPU topo: Num. threads per package: 16
[ 0.003971] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[ 0.003983] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.003984] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.003984] PM: hibernation: Registered nosave memory: [mem 0x09a7f000-0x09ffffff]
[ 0.003985] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a23bfff]
[ 0.003986] PM: hibernation: Registered nosave memory: [mem 0xa8f84000-0xa902cfff]
[ 0.003987] PM: hibernation: Registered nosave memory: [mem 0xacfce000-0xacfcefff]
[ 0.003987] PM: hibernation: Registered nosave memory: [mem 0xae2ff000-0xbadfefff]
[ 0.003988] PM: hibernation: Registered nosave memory: [mem 0xbbff9000-0xbbffcfff]
[ 0.003989] PM: hibernation: Registered nosave memory: [mem 0xbbfff000-0xffffffff]
[ 0.003990] [gap 0xc0000000-0xfedfffff] available for PCI devices
[ 0.003991] Booting paravirtualized kernel on bare hardware
[ 0.003993] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.004016] Zone ranges:
[ 0.004016] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.004017] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.004018] Normal [mem 0x0000000100000000-0x000000041e2fffff]
[ 0.004019] Device empty
[ 0.004019] Movable zone start for each node
[ 0.004020] Early memory node ranges
[ 0.004021] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.004021] node 0: [mem 0x0000000000100000-0x0000000009a7efff]
[ 0.004022] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.004022] node 0: [mem 0x000000000a23c000-0x00000000ae2fefff]
[ 0.004023] node 0: [mem 0x00000000badff000-0x00000000bbff8fff]
[ 0.004023] node 0: [mem 0x00000000bbffd000-0x00000000bbffefff]
[ 0.004023] node 0: [mem 0x0000000100000000-0x000000041e2fffff]
[ 0.004025] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e2fffff]
[ 0.004029] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.004037] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.004097] On node 0, zone DMA32: 1409 pages in unavailable ranges
[ 0.005694] On node 0, zone DMA32: 60 pages in unavailable ranges
[ 0.005759] On node 0, zone DMA32: 19200 pages in unavailable ranges
[ 0.005760] On node 0, zone DMA32: 4 pages in unavailable ranges
[ 0.013796] On node 0, zone Normal: 16385 pages in unavailable ranges
[ 0.013820] On node 0, zone Normal: 7424 pages in unavailable ranges
[ 0.013835] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.014237] percpu: Embedded 85 pages/cpu s225280 r8192 d114688 u524288
[ 0.014240] pcpu-alloc: s225280 r8192 d114688 u524288 alloc=1*2097152
[ 0.014243] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
[ 0.014245] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
[ 0.014260] Kernel command line: BOOT_IMAGE=/casper/vmlinuz thunderbolt.dyndbg=+p --- quiet splash
[ 0.014312] Unknown kernel command line parameters "--- splash", will be passed to user space.
[ 0.014539] printk: log buffer data + meta data: 262144 + 1114112 = 1376256 bytes
[ 0.015209] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.015550] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.015674] software IO TLB: area num 16.
[ 0.020727] Fallback order for Node 0: 0
[ 0.020734] Built 1 zonelists, mobility grouping on. Total pages: 3985885
[ 0.020735] Policy zone: Normal
[ 0.020745] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.036104] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.046530] ftrace: allocating 63941 entries in 252 pages
[ 0.046531] ftrace: allocated 252 pages with 6 groups
[ 0.046996] Dynamic Preempt: lazy
[ 0.047055] rcu: Preemptible hierarchical RCU implementation.
[ 0.047056] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[ 0.047057] Trampoline variant of Tasks RCU enabled.
[ 0.047057] Rude variant of Tasks RCU enabled.
[ 0.047058] Tracing variant of Tasks RCU enabled.
[ 0.047058] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.047059] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.047068] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[ 0.047070] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[ 0.049717] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
[ 0.049940] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.050108] Console: colour dummy device 80x25
[ 0.050110] printk: legacy console [tty0] enabled
[ 0.050146] ACPI: Core revision 20251212
[ 0.050347] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.050367] APIC: Switch to symmetric I/O mode setup
[ 0.050617] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:0xa0
[ 0.050619] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:0xa0
[ 0.050620] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:0xa0
[ 0.050620] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:0xa0
[ 0.050621] AMD-Vi: Using global IVHD EFR:0x246577efa2254afa, EFR2:0x0
[ 0.051390] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.052444] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057371] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x731aadb4383, max_idle_ns: 881591160298 ns
[ 0.057374] Calibrating delay loop (skipped), value calculated using timer frequency.. 7985.35 BogoMIPS (lpj=3992676)
[ 0.057390] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.057423] LVT offset 1 assigned for vector 0xf9
[ 0.057424] LVT offset 2 assigned for vector 0xf4
[ 0.057596] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[ 0.057596] Last level dTLB entries: 4KB 3072, 2MB 3072, 4MB 1536, 1GB 0
[ 0.057600] process: using mwait in idle threads
[ 0.057602] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.057604] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.057606] Transient Scheduler Attacks: Mitigation: Clear CPU buffers
[ 0.057606] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[ 0.057607] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.057608] Speculative Return Stack Overflow: Mitigation: Safe RET
[ 0.057608] VMSCAPE: Mitigation: IBPB before exit to userspace
[ 0.057608] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.057610] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.057611] active return thunk: srso_alias_return_thunk
[ 0.057619] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.057620] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.057620] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.057621] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.057621] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.057622] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.057622] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.057623] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[ 0.057623] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
[ 0.057624] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.057625] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64
[ 0.057626] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512
[ 0.057626] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[ 0.057627] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8
[ 0.057627] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16
[ 0.057628] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24
[ 0.057629] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.
[ 0.085288] Freeing SMP alternatives memory: 56K
[ 0.085292] pid_max: default: 32768 minimum: 301
[ 0.085435] landlock: Up and running.
[ 0.085437] Yama: becoming mindful.
[ 0.085551] AppArmor: AppArmor initialized
[ 0.085552] AppArmor: AppArmor secmark mediation reserved: ready to be enabled
[ 0.085655] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.085667] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.085752] VFS: Finished mounting rootfs on nullfs
[ 0.188574] smpboot: CPU0: AMD Ryzen 9 7940HS w/ Radeon 780M Graphics (family: 0x19, model: 0x74, stepping: 0x1)
[ 0.188785] Performance Events: Fam17h+ 16-deep LBR, core perfctr, AMD PMU driver.
[ 0.188819] ... version: 2
[ 0.188820] ... bit width: 48
[ 0.188821] ... generic counters: 6
[ 0.188822] ... generic bitmap: 000000000000003f
[ 0.188823] ... fixed-purpose counters: 0
[ 0.188824] ... fixed-purpose bitmap: 0000000000000000
[ 0.188825] ... value mask: 0000ffffffffffff
[ 0.188826] ... max period: 00007fffffffffff
[ 0.188827] ... global_ctrl mask: 000000000000003f
[ 0.188934] signal: max sigframe size: 3376
[ 0.189012] rcu: Hierarchical SRCU implementation.
[ 0.189014] rcu: Max phase no-delay instances is 400.
[ 0.189068] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[ 0.194001] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.194161] smp: Bringing up secondary CPUs ...
[ 0.194289] smpboot: x86: Booting SMP configuration:
[ 0.194291] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.206374] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.213412] smp: Brought up 1 node, 16 CPUs
[ 0.213412] smpboot: Total of 16 processors activated (127765.63 BogoMIPS)
[ 0.215482] Memory: 13474116K/15943540K available (23799K kernel code, 4952K rwdata, 16764K rodata, 5292K init, 5856K bss, 2442772K reserved, 0K cma-reserved)
[ 0.215805] devtmpfs: initialized
[ 0.215805] x86/mm: Memory block size: 128MB
[ 0.217972] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a23bfff] (245760 bytes)
[ 0.217972] ACPI: PM: Registering ACPI NVS region [mem 0xb11ff000-0xb66fefff] (89128960 bytes)
[ 0.218663] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.218663] posixtimers hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.218663] futex hash table entries: 4096 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear).
[ 0.218663] PM: RTC time: 10:13:31, date: 2026-09-23
[ 0.218918] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.219428] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.219485] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.219541] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.219548] audit: initializing netlink subsys (disabled)
[ 0.219559] audit: type=2000 audit(1790158411.168:1): state=initialized audit_enabled=0 res=1
[ 0.219559] thermal_sys: Registered thermal governor 'fair_share'
[ 0.219559] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.219559] thermal_sys: Registered thermal governor 'step_wise'
[ 0.219559] thermal_sys: Registered thermal governor 'user_space'
[ 0.219559] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.219559] cpuidle: using governor ladder
[ 0.219559] cpuidle: using governor menu
[ 0.224044] efi: Freeing EFI boot services memory: 115408K
[ 0.224047] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.224049] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.224173] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.224187] PCI: Using configuration type 1 for base access
[ 0.224310] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.224495] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.224495] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.224495] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.224495] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.225802] ACPI: Added _OSI(Module Device)
[ 0.225805] ACPI: Added _OSI(Processor Device)
[ 0.225807] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.254205] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP2.WWAN], AE_NOT_FOUND (20251212/dswload2-162)
[ 0.254213] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20251212/psobject-220)
[ 0.254216] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.254804] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP2.WWAN], AE_NOT_FOUND (20251212/dswload2-162)
[ 0.254809] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20251212/psobject-220)
[ 0.254812] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.254849] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP7.DEV0], AE_NOT_FOUND (20251212/dswload2-162)
[ 0.254853] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20251212/psobject-220)
[ 0.254856] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.255370] ACPI: 27 ACPI AML tables successfully acquired and loaded
[ 0.257274] ACPI: EC: EC started
[ 0.257276] ACPI: EC: interrupt blocked
[ 0.258041] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.258042] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.259295] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.276132] ACPI: \_SB_: platform _OSC: OS support mask [006e7eff]
[ 0.276661] ACPI: \_SB_: platform _OSC: OS control mask [006e7e7f]
[ 0.276984] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.276985] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.277925] ACPI: Interpreter enabled
[ 0.277942] ACPI: PM: (supports S0 S4 S5)
[ 0.277943] ACPI: Using IOAPIC for interrupt routing
[ 0.279805] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.279807] PCI: Ignoring E820 reservations for host bridge windows
[ 0.280319] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.281902] ACPI: \_SB_.PCI0.GPP2.P0WW: New power resource
[ 0.282458] ACPI: \_SB_.PCI0.GPP0.M237: New power resource
[ 0.295231] ACPI: \_SB_.PCI0.GPP0.SWUS.M237: New power resource
[ 0.295331] ACPI: \_SB_.PCI0.GPP0.SWUS.SWDS.M237: New power resource
[ 0.296635] ACPI: \_SB_.PCI0.GPP7.RPR2: New power resource
[ 0.297075] ACPI: \_SB_.PCI0.GPP8.P0NV: New power resource
[ 0.298544] ACPI: \_SB_.PCI0.GP11.PWRS: New power resource
[ 0.299369] ACPI: \_SB_.PCI0.GP11.SWUS.PWRS: New power resource
[ 0.301072] ACPI: \_SB_.PCI0.GP12.PWRS: New power resource
[ 0.302726] ACPI: \_SB_.PCI0.GP12.SWUS.PWRS: New power resource
[ 0.303016] ACPI: \_SB_.PCI0.GP17.PWRS: New power resource
[ 0.303317] ACPI: \_SB_.PCI0.GP17.VGA_.PWRS: New power resource
[ 0.303688] ACPI: \_SB_.PCI0.GP17.HDAU.PWRS: New power resource
[ 0.303999] ACPI: \_SB_.PCI0.GP17.ACP_.PWRS: New power resource
[ 0.304710] ACPI: \_SB_.PCI0.GP17.AZAL.PWRS: New power resource
[ 0.305447] ACPI: \_SB_.PCI0.GP17.XHC0.PWRS: New power resource
[ 0.306126] ACPI: \_SB_.PCI0.GP17.XHC0.RHUB.PRT4.BTPR: New power resource
[ 0.306760] ACPI: \_SB_.PCI0.GP17.XHC1.PWRS: New power resource
[ 0.308036] ACPI: \_SB_.PCI0.GP19.XHC2.PWRS: New power resource
[ 0.309058] ACPI: \_SB_.PCI0.GP19.XHC3.PWRS: New power resource
[ 0.310228] ACPI: \_SB_.PCI0.GP19.XHC4.PWRS: New power resource
[ 0.311400] ACPI: \_SB_.PCI0.GP19.NHI0.PWRS: New power resource
[ 0.312155] ACPI: \_SB_.PCI0.GP19.NHI1.PWRS: New power resource
[ 0.321500] ACPI: \_SB_.PRWL: New power resource
[ 0.323156] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.323162] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.323355] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.323357] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.324090] PCI host bridge to bus 0000:00
[ 0.324093] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.324096] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.324097] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.324099] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.324101] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfcffffff window]
[ 0.324102] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xf9ffffff window]
[ 0.324104] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.324105] pci_bus 0000:00: root bus resource [mem 0x440000000-0x7fffffffff window]
[ 0.324107] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.324139] pci 0000:00:00.0: [1022:14e8] type 00 class 0x060000 conventional PCI endpoint
[ 0.324357] pci 0000:00:00.2: [1022:14e9] type 00 class 0x080600 conventional PCI endpoint
[ 0.324553] pci 0000:00:01.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.324713] pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port
[ 0.324750] pci 0000:00:01.1: PCI bridge to [bus 01-05]
[ 0.324760] pci 0000:00:01.1: bridge window [io 0xf000-0xffff]
[ 0.324766] pci 0000:00:01.1: bridge window [mem 0xdc000000-0xdd0fffff]
[ 0.324780] pci 0000:00:01.1: bridge window [mem 0x6000000000-0x6801ffffff 64bit pref]
[ 0.324909] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.325649] pci 0000:00:02.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.325810] pci 0000:00:02.2: [1022:14ee] type 01 class 0x060400 PCIe Root Port
[ 0.325847] pci 0000:00:02.2: PCI bridge to [bus 06]
[ 0.325859] pci 0000:00:02.2: bridge window [mem 0xdda00000-0xddbfffff]
[ 0.325889] pci 0000:00:02.2: enabling Extended Tags
[ 0.326014] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.326307] pci 0000:00:02.3: [1022:14ee] type 01 class 0x060400 PCIe Root Port
[ 0.326349] pci 0000:00:02.3: PCI bridge to [bus 07]
[ 0.326362] pci 0000:00:02.3: bridge window [mem 0xde100000-0xde1fffff]
[ 0.326521] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.326818] pci 0000:00:02.4: [1022:14ee] type 01 class 0x060400 PCIe Root Port
[ 0.326860] pci 0000:00:02.4: PCI bridge to [bus 08]
[ 0.326873] pci 0000:00:02.4: bridge window [mem 0xde000000-0xde0fffff]
[ 0.326906] pci 0000:00:02.4: enabling Extended Tags
[ 0.327029] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.327279] pci 0000:00:03.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.327420] pci 0000:00:04.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.327583] pci 0000:00:04.1: [1022:14ef] type 01 class 0x060400 PCIe Root Port
[ 0.327626] pci 0000:00:04.1: PCI bridge to [bus 09-68]
[ 0.327638] pci 0000:00:04.1: bridge window [io 0xa000-0xdfff]
[ 0.327643] pci 0000:00:04.1: bridge window [mem 0xc4000000-0xdbffffff]
[ 0.327663] pci 0000:00:04.1: bridge window [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.327687] pci 0000:00:04.1: enabling Extended Tags
[ 0.328061] pci 0000:00:04.1: PME# supported from D0 D3hot D3cold
[ 0.329809] pci 0000:00:08.0: [1022:14ea] type 00 class 0x060000 conventional PCI endpoint
[ 0.329958] pci 0000:00:08.1: [1022:14eb] type 01 class 0x060400 PCIe Root Port
[ 0.329973] pci 0000:00:08.1: PCI bridge to [bus 69]
[ 0.329978] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.329982] pci 0000:00:08.1: bridge window [mem 0xdd200000-0xdd8fffff]
[ 0.329989] pci 0000:00:08.1: bridge window [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.329995] pci 0000:00:08.1: enabling Extended Tags
[ 0.330038] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.330368] pci 0000:00:08.2: [1022:14eb] type 01 class 0x060400 PCIe Root Port
[ 0.330409] pci 0000:00:08.2: PCI bridge to [bus 6a]
[ 0.330414] pci 0000:00:08.2: bridge window [mem 0xddf00000-0xddffffff]
[ 0.330421] pci 0000:00:08.2: bridge window [mem 0x7c10900000-0x7c109fffff 64bit pref]
[ 0.330428] pci 0000:00:08.2: enabling Extended Tags
[ 0.330471] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[ 0.330610] pci 0000:00:08.3: [1022:14eb] type 01 class 0x060400 PCIe Root Port
[ 0.330626] pci 0000:00:08.3: PCI bridge to [bus 6b]
[ 0.330632] pci 0000:00:08.3: bridge window [mem 0xddc00000-0xddefffff]
[ 0.330644] pci 0000:00:08.3: enabling Extended Tags
[ 0.330687] pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
[ 0.331023] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.331162] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[ 0.331305] pci 0000:00:18.0: [1022:14f0] type 00 class 0x060000 conventional PCI endpoint
[ 0.331344] pci 0000:00:18.1: [1022:14f1] type 00 class 0x060000 conventional PCI endpoint
[ 0.331385] pci 0000:00:18.2: [1022:14f2] type 00 class 0x060000 conventional PCI endpoint
[ 0.331424] pci 0000:00:18.3: [1022:14f3] type 00 class 0x060000 conventional PCI endpoint
[ 0.331462] pci 0000:00:18.4: [1022:14f4] type 00 class 0x060000 conventional PCI endpoint
[ 0.331499] pci 0000:00:18.5: [1022:14f5] type 00 class 0x060000 conventional PCI endpoint
[ 0.331538] pci 0000:00:18.6: [1022:14f6] type 00 class 0x060000 conventional PCI endpoint
[ 0.331577] pci 0000:00:18.7: [1022:14f7] type 00 class 0x060000 conventional PCI endpoint
[ 0.332173] pci 0000:01:00.0: [10de:28e0] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.332199] pci 0000:01:00.0: BAR 0 [mem 0xdc000000-0xdcffffff]
[ 0.332204] pci 0000:01:00.0: BAR 1 [mem 0x6000000000-0x61ffffffff 64bit pref]
[ 0.332208] pci 0000:01:00.0: BAR 3 [mem 0x6200000000-0x6201ffffff 64bit pref]
[ 0.332210] pci 0000:01:00.0: BAR 5 [io 0xf000-0xf07f]
[ 0.332214] pci 0000:01:00.0: ROM [mem 0xdd000000-0xdd07ffff pref]
[ 0.332268] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.333670] pci 0000:01:00.1: [10de:22be] type 00 class 0x040300 PCIe Endpoint
[ 0.333696] pci 0000:01:00.1: BAR 0 [mem 0xdd080000-0xdd083fff]
[ 0.333851] pci 0000:00:01.1: PCI bridge to [bus 01-05]
[ 0.333995] pci 0000:06:00.0: [17cb:1107] type 00 class 0x028000 PCIe Endpoint
[ 0.334042] pci 0000:06:00.0: BAR 0 [mem 0xdda00000-0xddbfffff 64bit]
[ 0.334140] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.334247] pci 0000:06:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:02.2 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[ 0.334422] pci 0000:00:02.2: PCI bridge to [bus 06]
[ 0.334647] pci 0000:07:00.0: [17a0:9755] type 00 class 0x080501 PCIe Endpoint
[ 0.334720] pci 0000:07:00.0: BAR 0 [mem 0xde100000-0xde100fff]
[ 0.334908] pci 0000:07:00.0: supports D1 D2
[ 0.334909] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.335338] pci 0000:00:02.3: PCI bridge to [bus 07]
[ 0.335695] pci 0000:08:00.0: [15b7:5015] type 00 class 0x010802 PCIe Endpoint
[ 0.335732] pci 0000:08:00.0: BAR 0 [mem 0xde000000-0xde003fff 64bit]
[ 0.336035] pci 0000:00:02.4: PCI bridge to [bus 08]
[ 0.336129] pci 0000:00:04.1: PCI bridge to [bus 09-68]
[ 0.336257] pci 0000:69:00.0: [1002:15bf] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.336286] pci 0000:69:00.0: BAR 0 [mem 0x7c00000000-0x7c0fffffff 64bit pref]
[ 0.336290] pci 0000:69:00.0: BAR 2 [mem 0xdd200000-0xdd3fffff 64bit pref]
[ 0.336293] pci 0000:69:00.0: BAR 4 [io 0xe000-0xe0ff]
[ 0.336295] pci 0000:69:00.0: BAR 5 [mem 0xdd800000-0xdd87ffff]
[ 0.336302] pci 0000:69:00.0: enabling Extended Tags
[ 0.336381] pci 0000:69:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.336727] pci 0000:69:00.1: [1002:1640] type 00 class 0x040300 PCIe Legacy Endpoint
[ 0.336753] pci 0000:69:00.1: BAR 0 [mem 0xdd8c8000-0xdd8cbfff]
[ 0.336763] pci 0000:69:00.1: enabling Extended Tags
[ 0.336803] pci 0000:69:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.337100] pci 0000:69:00.2: [1022:15c7] type 00 class 0x108000 PCIe Endpoint
[ 0.337127] pci 0000:69:00.2: BAR 2 [mem 0xdd700000-0xdd7fffff]
[ 0.337131] pci 0000:69:00.2: BAR 5 [mem 0xdd8ce000-0xdd8cffff]
[ 0.337139] pci 0000:69:00.2: enabling Extended Tags
[ 0.337292] pci 0000:69:00.3: [1022:15b9] type 00 class 0x0c0330 PCIe Endpoint
[ 0.337321] pci 0000:69:00.3: BAR 0 [mem 0xdd600000-0xdd6fffff 64bit]
[ 0.337330] pci 0000:69:00.3: enabling Extended Tags
[ 0.337374] pci 0000:69:00.3: PME# supported from D0 D3hot D3cold
[ 0.337675] pci 0000:69:00.4: [1022:15ba] type 00 class 0x0c0330 PCIe Endpoint
[ 0.337704] pci 0000:69:00.4: BAR 0 [mem 0xdd500000-0xdd5fffff 64bit]
[ 0.337714] pci 0000:69:00.4: enabling Extended Tags
[ 0.337765] pci 0000:69:00.4: PME# supported from D0 D3hot D3cold
[ 0.338051] pci 0000:69:00.5: [1022:15e2] type 00 class 0x048000 PCIe Endpoint
[ 0.338078] pci 0000:69:00.5: BAR 0 [mem 0xdd880000-0xdd8bffff]
[ 0.338082] pci 0000:69:00.5: BAR 2 [mem 0x7c10000000-0x7c107fffff 64bit pref]
[ 0.338091] pci 0000:69:00.5: enabling Extended Tags
[ 0.338131] pci 0000:69:00.5: PME# supported from D0 D3hot D3cold
[ 0.338426] pci 0000:69:00.6: [1022:15e3] type 00 class 0x040300 PCIe Endpoint
[ 0.338455] pci 0000:69:00.6: BAR 0 [mem 0xdd8c0000-0xdd8c7fff]
[ 0.338466] pci 0000:69:00.6: enabling Extended Tags
[ 0.338507] pci 0000:69:00.6: PME# supported from D0 D3hot D3cold
[ 0.338793] pci 0000:69:00.7: [1022:164a] type 00 class 0x118000 PCIe Endpoint
[ 0.338821] pci 0000:69:00.7: BAR 2 [mem 0xdd400000-0xdd4fffff]
[ 0.338826] pci 0000:69:00.7: BAR 5 [mem 0xdd8cc000-0xdd8cdfff]
[ 0.338833] pci 0000:69:00.7: enabling Extended Tags
[ 0.338997] pci 0000:00:08.1: PCI bridge to [bus 69]
[ 0.339074] pci 0000:6a:00.0: [1022:14ec] type 00 class 0x130000 PCIe Endpoint
[ 0.339108] pci 0000:6a:00.0: enabling Extended Tags
[ 0.339162] pci 0000:6a:00.0: PME# supported from D3hot D3cold
[ 0.339289] pci 0000:6a:00.1: [1022:1502] type 00 class 0x118000 PCIe Endpoint
[ 0.339324] pci 0000:6a:00.1: BAR 0 [mem 0xddf00000-0xddf7ffff]
[ 0.339328] pci 0000:6a:00.1: BAR 1 [mem 0xddfc0000-0xddfc1fff]
[ 0.339333] pci 0000:6a:00.1: BAR 2 [mem 0x7c10900000-0x7c1093ffff 64bit pref]
[ 0.339335] pci 0000:6a:00.1: BAR 4 [mem 0xddf80000-0xddfbffff]
[ 0.339343] pci 0000:6a:00.1: enabling Extended Tags
[ 0.339546] pci 0000:00:08.2: PCI bridge to [bus 6a]
[ 0.339673] pci 0000:6b:00.0: [1022:14ec] type 00 class 0x130000 PCIe Endpoint
[ 0.339707] pci 0000:6b:00.0: enabling Extended Tags
[ 0.340294] pci 0000:6b:00.3: [1022:15c0] type 00 class 0x0c0330 PCIe Endpoint
[ 0.340324] pci 0000:6b:00.3: BAR 0 [mem 0xddd00000-0xdddfffff 64bit]
[ 0.340333] pci 0000:6b:00.3: enabling Extended Tags
[ 0.340383] pci 0000:6b:00.3: PME# supported from D0 D3hot D3cold
[ 0.340924] pci 0000:6b:00.4: [1022:15c1] type 00 class 0x0c0330 PCIe Endpoint
[ 0.340953] pci 0000:6b:00.4: BAR 0 [mem 0xddc00000-0xddcfffff 64bit]
[ 0.340964] pci 0000:6b:00.4: enabling Extended Tags
[ 0.341007] pci 0000:6b:00.4: PME# supported from D0 D3hot D3cold
[ 0.341539] pci 0000:6b:00.6: [1022:1669] type 00 class 0x0c0340 PCIe Endpoint
[ 0.341573] pci 0000:6b:00.6: BAR 0 [mem 0xdde00000-0xdde7ffff 64bit]
[ 0.341584] pci 0000:6b:00.6: enabling Extended Tags
[ 0.341628] pci 0000:6b:00.6: PME# supported from D0 D3hot D3cold
[ 0.342134] pci 0000:00:08.3: PCI bridge to [bus 6b]
[ 0.354421] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.354517] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.354614] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.354723] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.354827] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.354899] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.354984] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.355057] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.357635] Low-power S0 idle used by default for system suspend
[ 0.358182] ACPI: EC: interrupt unblocked
[ 0.358184] ACPI: EC: event unblocked
[ 0.358191] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.358193] ACPI: EC: GPE=0x10
[ 0.358194] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot ECDT EC initialization complete
[ 0.358196] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
[ 0.358251] iommu: Default domain type: Translated
[ 0.358251] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.358528] SCSI subsystem initialized
[ 0.358533] libata version 3.00 loaded.
[ 0.358533] ACPI: bus type USB registered
[ 0.358533] usbcore: registered new interface driver usbfs
[ 0.358533] usbcore: registered new interface driver hub
[ 0.358533] usbcore: registered new device driver usb
[ 0.416693] pps_core: LinuxPPS API ver. 1 registered
[ 0.416695] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.416699] PTP clock support registered
[ 0.416721] EDAC MC: Ver: 3.0.0
[ 0.416774] efivars: Registered efivars operations
[ 0.417578] NetLabel: Initializing
[ 0.417579] NetLabel: domain hash size = 128
[ 0.417581] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.417596] NetLabel: unlabeled traffic allowed by default
[ 0.417610] mctp: management component transport protocol core
[ 0.417610] NET: Registered PF_MCTP protocol family
[ 0.417610] PCI: Using ACPI for IRQ routing
[ 0.426511] PCI: pci_cache_line_size set to 64 bytes
[ 0.426877] e820: register RAM buffer resource [mem 0x09a7f000-0x0bffffff]
[ 0.426879] e820: register RAM buffer resource [mem 0x0a200000-0x0bffffff]
[ 0.426881] e820: register RAM buffer resource [mem 0xa8f84000-0xabffffff]
[ 0.426882] e820: register RAM buffer resource [mem 0xacfce000-0xafffffff]
[ 0.426883] e820: register RAM buffer resource [mem 0xae2ff000-0xafffffff]
[ 0.426884] e820: register RAM buffer resource [mem 0xbbff9000-0xbbffffff]
[ 0.426885] e820: register RAM buffer resource [mem 0xbbfff000-0xbbffffff]
[ 0.426886] e820: register RAM buffer resource [mem 0x41e300000-0x41fffffff]
[ 0.426938] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.426938] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.426938] pci 0000:69:00.0: vgaarb: setting as boot VGA device
[ 0.426938] pci 0000:69:00.0: vgaarb: bridge control possible
[ 0.426938] pci 0000:69:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.426938] vgaarb: loaded
[ 0.426938] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.426938] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.431038] clocksource: Switched to clocksource tsc-early
[ 0.431239] VFS: Disk quotas dquot_6.6.0
[ 0.431253] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.431269] AppArmor: AppArmor Filesystem Enabled
[ 0.431269] acpi PNP0C01:00: Reserved [mem 0xe0000000-0xefffffff]
[ 0.431269] acpi PNP0C02:00: Reserved [mem 0xfd300000-0xfd3fffff]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0010-0x001f]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0022-0x003f]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0063]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0065]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0067-0x006f]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0072-0x007f]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0080]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0084-0x0086]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0088]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x008c-0x008e]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x0090-0x009f]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x00a2-0x00bf]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x00b1]
[ 0.431269] acpi PNP0C02:01: Skipped [io 0x00e0-0x00ef]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x04d0-0x04d1]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x040b]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x04d6]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0c00-0x0c01]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0c14]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0c50-0x0c51]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0c52]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0c6c]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0c6f]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0cd0-0x0cd1]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0cd2-0x0cd3]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0cd4-0x0cd5]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0cd6-0x0cd7]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0cd8-0x0cdf]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0800-0x089f]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0b00-0x0b0f]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0b20-0x0b3f]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0900-0x090f]
[ 0.431269] acpi PNP0C02:01: Reserved [io 0x0910-0x091f]
[ 0.431269] acpi PNP0C02:01: Could not reserve [mem 0xfec00000-0xfec00fff]
[ 0.431269] acpi PNP0C02:01: Could not reserve [mem 0xfec01000-0xfec01fff]
[ 0.431269] acpi PNP0C02:01: Reserved [mem 0xfedc0000-0xfedc0fff]
[ 0.431269] acpi PNP0C02:01: Reserved [mem 0xfee00000-0xfee00fff]
[ 0.431269] acpi PNP0C02:01: Could not reserve [mem 0xfed80000-0xfed8ffff]
[ 0.431269] acpi PNP0C02:01: Reserved [mem 0xfec10000-0xfec10fff]
[ 0.431269] acpi PNP0C02:01: Reserved [mem 0xff000000-0xffffffff]
[ 0.431269] pnp: PnP ACPI init
[ 0.439184] pnp: PnP ACPI: found 1 devices
[ 0.445414] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.445577] NET: Registered PF_INET protocol family
[ 0.445725] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.458196] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.458207] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.458228] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.458315] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.458369] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.458448] MPTCP token hash table entries: 16384 (order: 7, 393216 bytes, linear)
[ 0.458489] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.458531] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.458603] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.458617] NET: Registered PF_XDP protocol family
[ 0.458645] pci 0000:00:01.1: PCI bridge to [bus 01-05]
[ 0.458659] pci 0000:00:01.1: bridge window [io 0xf000-0xffff]
[ 0.458665] pci 0000:00:01.1: bridge window [mem 0xdc000000-0xdd0fffff]
[ 0.458670] pci 0000:00:01.1: bridge window [mem 0x6000000000-0x6801ffffff 64bit pref]
[ 0.458677] pci 0000:00:02.2: PCI bridge to [bus 06]
[ 0.458683] pci 0000:00:02.2: bridge window [mem 0xdda00000-0xddbfffff]
[ 0.458695] pci 0000:00:02.3: PCI bridge to [bus 07]
[ 0.458701] pci 0000:00:02.3: bridge window [mem 0xde100000-0xde1fffff]
[ 0.458713] pci 0000:00:02.4: PCI bridge to [bus 08]
[ 0.458719] pci 0000:00:02.4: bridge window [mem 0xde000000-0xde0fffff]
[ 0.458731] pci 0000:00:04.1: PCI bridge to [bus 09-68]
[ 0.458735] pci 0000:00:04.1: bridge window [io 0xa000-0xdfff]
[ 0.458743] pci 0000:00:04.1: bridge window [mem 0xc4000000-0xdbffffff]
[ 0.458750] pci 0000:00:04.1: bridge window [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.458760] pci 0000:00:08.1: PCI bridge to [bus 69]
[ 0.458762] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.458768] pci 0000:00:08.1: bridge window [mem 0xdd200000-0xdd8fffff]
[ 0.458771] pci 0000:00:08.1: bridge window [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.458776] pci 0000:00:08.2: PCI bridge to [bus 6a]
[ 0.458780] pci 0000:00:08.2: bridge window [mem 0xddf00000-0xddffffff]
[ 0.458783] pci 0000:00:08.2: bridge window [mem 0x7c10900000-0x7c109fffff 64bit pref]
[ 0.458788] pci 0000:00:08.3: PCI bridge to [bus 6b]
[ 0.458793] pci 0000:00:08.3: bridge window [mem 0xddc00000-0xddefffff]
[ 0.458801] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.458803] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.458804] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff window]
[ 0.458806] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.458807] pci_bus 0000:00: resource 8 [mem 0xfa000000-0xfcffffff window]
[ 0.458809] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xf9ffffff window]
[ 0.458811] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff window]
[ 0.458812] pci_bus 0000:00: resource 11 [mem 0x440000000-0x7fffffffff window]
[ 0.458814] pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
[ 0.458816] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdd0fffff]
[ 0.458817] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x6801ffffff 64bit pref]
[ 0.458819] pci_bus 0000:06: resource 1 [mem 0xdda00000-0xddbfffff]
[ 0.458821] pci_bus 0000:07: resource 1 [mem 0xde100000-0xde1fffff]
[ 0.458822] pci_bus 0000:08: resource 1 [mem 0xde000000-0xde0fffff]
[ 0.458824] pci_bus 0000:09: resource 0 [io 0xa000-0xdfff]
[ 0.458826] pci_bus 0000:09: resource 1 [mem 0xc4000000-0xdbffffff]
[ 0.458827] pci_bus 0000:09: resource 2 [mem 0x6c00000000-0x7bffffffff 64bit pref]
[ 0.458829] pci_bus 0000:69: resource 0 [io 0xe000-0xefff]
[ 0.458831] pci_bus 0000:69: resource 1 [mem 0xdd200000-0xdd8fffff]
[ 0.458832] pci_bus 0000:69: resource 2 [mem 0x7c00000000-0x7c107fffff 64bit pref]
[ 0.458834] pci_bus 0000:6a: resource 1 [mem 0xddf00000-0xddffffff]
[ 0.458835] pci_bus 0000:6a: resource 2 [mem 0x7c10900000-0x7c109fffff 64bit pref]
[ 0.458837] pci_bus 0000:6b: resource 1 [mem 0xddc00000-0xddefffff]
[ 0.459019] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.459059] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.459358] pci 0000:69:00.1: D0 power state depends on 0000:69:00.0
[ 0.459428] pci 0000:00:08.1: can't derive routing for PCI INT A
[ 0.459430] pci 0000:00:08.1: PCI INT A: not connected
[ 0.459766] pci 0000:00:08.3: can't derive routing for PCI INT A
[ 0.459768] pci 0000:00:08.3: PCI INT A: not connected
[ 0.460005] PCI: CLS 64 bytes, default 64
[ 0.460048] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.460115] Trying to unpack rootfs image as initramfs...
[ 0.460167] pci 0000:00:01.0: Adding to iommu group 0
[ 0.460195] pci 0000:00:01.1: Adding to iommu group 1
[ 0.460272] pci 0000:00:02.0: Adding to iommu group 2
[ 0.460307] pci 0000:00:02.2: Adding to iommu group 3
[ 0.460343] pci 0000:00:02.3: Adding to iommu group 4
[ 0.460379] pci 0000:00:02.4: Adding to iommu group 5
[ 0.460400] pci 0000:00:03.0: Adding to iommu group 6
[ 0.460427] pci 0000:00:04.0: Adding to iommu group 7
[ 0.460440] pci 0000:00:04.1: Adding to iommu group 7
[ 0.460499] pci 0000:00:08.0: Adding to iommu group 8
[ 0.460531] pci 0000:00:08.1: Adding to iommu group 9
[ 0.460573] pci 0000:00:08.2: Adding to iommu group 10
[ 0.460612] pci 0000:00:08.3: Adding to iommu group 11
[ 0.460640] pci 0000:00:14.0: Adding to iommu group 12
[ 0.460654] pci 0000:00:14.3: Adding to iommu group 12
[ 0.460721] pci 0000:00:18.0: Adding to iommu group 13
[ 0.460736] pci 0000:00:18.1: Adding to iommu group 13
[ 0.460750] pci 0000:00:18.2: Adding to iommu group 13
[ 0.460765] pci 0000:00:18.3: Adding to iommu group 13
[ 0.460780] pci 0000:00:18.4: Adding to iommu group 13
[ 0.460795] pci 0000:00:18.5: Adding to iommu group 13
[ 0.460809] pci 0000:00:18.6: Adding to iommu group 13
[ 0.460824] pci 0000:00:18.7: Adding to iommu group 13
[ 0.460859] pci 0000:01:00.0: Adding to iommu group 14
[ 0.460883] pci 0000:01:00.1: Adding to iommu group 14
[ 0.460906] pci 0000:06:00.0: Adding to iommu group 15
[ 0.460930] pci 0000:07:00.0: Adding to iommu group 16
[ 0.460956] pci 0000:08:00.0: Adding to iommu group 17
[ 0.461011] pci 0000:69:00.0: Adding to iommu group 18
[ 0.461056] pci 0000:69:00.1: Adding to iommu group 19
[ 0.461124] pci 0000:69:00.2: Adding to iommu group 20
[ 0.461182] pci 0000:69:00.3: Adding to iommu group 21
[ 0.461233] pci 0000:69:00.4: Adding to iommu group 22
[ 0.461266] pci 0000:69:00.5: Adding to iommu group 23
[ 0.461321] pci 0000:69:00.6: Adding to iommu group 24
[ 0.461379] pci 0000:69:00.7: Adding to iommu group 25
[ 0.461428] pci 0000:6a:00.0: Adding to iommu group 26
[ 0.461477] pci 0000:6a:00.1: Adding to iommu group 27
[ 0.461502] pci 0000:6b:00.0: Adding to iommu group 28
[ 0.461539] pci 0000:6b:00.3: Adding to iommu group 29
[ 0.461577] pci 0000:6b:00.4: Adding to iommu group 30
[ 0.461605] pci 0000:6b:00.6: Adding to iommu group 31
[ 0.464250] AMD-Vi: Extended features (0x246577efa2254afa, 0x0): PPR NX GT [5] IA GA PC GA_vAPIC
[ 0.464262] AMD-Vi: Interrupt remapping enabled
[ 0.464526] AMD-Vi: Virtual APIC enabled
[ 0.464573] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.464575] software IO TLB: mapped [mem 0x00000000a38f4000-0x00000000a78f4000] (64MB)
[ 0.464622] LVT offset 0 assigned for vector 0x400
[ 0.467751] perf: AMD IBS detected (0x00000bff)
[ 0.467771] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.469077] Initialise system trusted keyrings
[ 0.469094] Key type blacklist registered
[ 0.469143] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.469544] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.469656] fuse: init (API version 7.45)
[ 0.469812] integrity: Platform Keyring initialized
[ 0.469815] integrity: Machine keyring initialized
[ 0.477187] Key type asymmetric registered
[ 0.477190] Asymmetric key parser 'x509' registered
[ 0.477219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.477277] io scheduler mq-deadline registered
[ 0.479714] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.479923] pcieport 0000:00:01.1: PME: Signaling with IRQ 31
[ 0.479991] pcieport 0000:00:01.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.480318] pcieport 0000:00:02.2: PME: Signaling with IRQ 32
[ 0.480564] pcieport 0000:00:02.3: PME: Signaling with IRQ 33
[ 0.480813] pcieport 0000:00:02.4: PME: Signaling with IRQ 34
[ 0.481107] pcieport 0000:00:04.1: PME: Signaling with IRQ 35
[ 0.481192] pcieport 0000:00:04.1: AER: enabled with IRQ 35
[ 0.481235] pcieport 0000:00:04.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.481799] pcieport 0000:00:08.1: PME: Signaling with IRQ 36
[ 0.482003] pcieport 0000:00:08.2: can't derive routing for PCI INT A
[ 0.482004] pcieport 0000:00:08.2: PCI INT A: not connected
[ 0.482092] pcieport 0000:00:08.2: PME: Signaling with IRQ 37
[ 0.482255] pcieport 0000:00:08.3: PME: Signaling with IRQ 38
[ 0.483545] ACPI: AC: AC Adapter [AC0] (on-line)
[ 0.483607] input: Lid Switch as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/PNP0C0D:00/input/input0
[ 0.483625] ACPI: button: Lid Switch [LID]
[ 0.483664] input: Power Button as /devices/platform/PNP0C0C:00/input/input1
[ 0.483682] ACPI: button: Power Button [PWRB]
[ 0.483720] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input2
[ 0.483737] ACPI: button: Sleep Button [SLPB]
[ 0.483773] Monitor-Mwait will be used to enter C-1 state
[ 0.488294] Estimated ratio of average max frequency by base frequency (times 1024): 1185
[ 0.489304] acpi LNXTHERM:00: registered as thermal_zone0
[ 0.489307] ACPI: thermal: Thermal Zone [THRM] (69 C)
[ 0.489441] acpi LNXTHERM:01: registered as thermal_zone1
[ 0.489442] ACPI: thermal: Thermal Zone [TZ01] (20 C)
[ 0.489731] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.494471] ACPI: battery: Slot [BAT0] (battery present)
[ 0.512443] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.514943] Linux agpgart interface v0.103
[ 0.523158] tpm_crb MSFT0101:00: Disabling hwrng
[ 0.528913] loop: module loaded
[ 0.529227] ACPI: bus type drm_connector registered
[ 0.529512] tun: Universal TUN/TAP device driver, 1.6
[ 0.529559] PPP generic driver version 2.4.2
[ 0.529829] xhci_hcd 0000:69:00.3: xHCI Host Controller
[ 0.529836] xhci_hcd 0000:69:00.3: new USB bus registered, assigned bus number 1
[ 0.530256] xhci_hcd 0000:69:00.3: hcc params 0x0128ffc5 hci version 0x120 quirks 0x0000000200000010
[ 0.530543] xhci_hcd 0000:69:00.3: xHCI Host Controller
[ 0.530545] xhci_hcd 0000:69:00.3: new USB bus registered, assigned bus number 2
[ 0.530548] xhci_hcd 0000:69:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.530594] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00
[ 0.530597] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.530599] usb usb1: Product: xHCI Host Controller
[ 0.530601] usb usb1: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.530603] usb usb1: SerialNumber: 0000:69:00.3
[ 0.530705] hub 1-0:1.0: USB hub found
[ 0.530734] hub 1-0:1.0: 5 ports detected
[ 0.531404] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.531430] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00
[ 0.531432] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.531433] usb usb2: Product: xHCI Host Controller
[ 0.531435] usb usb2: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.531436] usb usb2: SerialNumber: 0000:69:00.3
[ 0.531516] hub 2-0:1.0: USB hub found
[ 0.531551] hub 2-0:1.0: 2 ports detected
[ 0.531993] xhci_hcd 0000:69:00.4: xHCI Host Controller
[ 0.532001] xhci_hcd 0000:69:00.4: new USB bus registered, assigned bus number 3
[ 0.532479] xhci_hcd 0000:69:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 0.532727] xhci_hcd 0000:69:00.4: xHCI Host Controller
[ 0.532730] xhci_hcd 0000:69:00.4: new USB bus registered, assigned bus number 4
[ 0.532732] xhci_hcd 0000:69:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.532780] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00
[ 0.532782] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.532783] usb usb3: Product: xHCI Host Controller
[ 0.532785] usb usb3: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.532786] usb usb3: SerialNumber: 0000:69:00.4
[ 0.532870] hub 3-0:1.0: USB hub found
[ 0.532881] hub 3-0:1.0: 1 port detected
[ 0.533087] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.533110] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00
[ 0.533112] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.533113] usb usb4: Product: xHCI Host Controller
[ 0.533115] usb usb4: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.533116] usb usb4: SerialNumber: 0000:69:00.4
[ 0.533194] hub 4-0:1.0: USB hub found
[ 0.533223] hub 4-0:1.0: 1 port detected
[ 0.533527] xhci_hcd 0000:6b:00.3: xHCI Host Controller
[ 0.533531] xhci_hcd 0000:6b:00.3: new USB bus registered, assigned bus number 5
[ 0.533880] xhci_hcd 0000:6b:00.3: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 0.534312] xhci_hcd 0000:6b:00.3: xHCI Host Controller
[ 0.534319] xhci_hcd 0000:6b:00.3: new USB bus registered, assigned bus number 6
[ 0.534321] xhci_hcd 0000:6b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.534365] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00
[ 0.534367] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.534368] usb usb5: Product: xHCI Host Controller
[ 0.534370] usb usb5: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.534371] usb usb5: SerialNumber: 0000:6b:00.3
[ 0.534451] hub 5-0:1.0: USB hub found
[ 0.534462] hub 5-0:1.0: 1 port detected
[ 0.534651] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.534674] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00
[ 0.534676] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.534678] usb usb6: Product: xHCI Host Controller
[ 0.534679] usb usb6: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.534681] usb usb6: SerialNumber: 0000:6b:00.3
[ 0.534761] hub 6-0:1.0: USB hub found
[ 0.534791] hub 6-0:1.0: 1 port detected
[ 0.535419] xhci_hcd 0000:6b:00.4: xHCI Host Controller
[ 0.535424] xhci_hcd 0000:6b:00.4: new USB bus registered, assigned bus number 7
[ 0.535811] xhci_hcd 0000:6b:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 0.536251] xhci_hcd 0000:6b:00.4: xHCI Host Controller
[ 0.536253] xhci_hcd 0000:6b:00.4: new USB bus registered, assigned bus number 8
[ 0.536255] xhci_hcd 0000:6b:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.536299] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00
[ 0.536301] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536302] usb usb7: Product: xHCI Host Controller
[ 0.536304] usb usb7: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.536305] usb usb7: SerialNumber: 0000:6b:00.4
[ 0.536387] hub 7-0:1.0: USB hub found
[ 0.536399] hub 7-0:1.0: 1 port detected
[ 0.536595] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.536619] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.00
[ 0.536621] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.536623] usb usb8: Product: xHCI Host Controller
[ 0.536624] usb usb8: Manufacturer: Linux 7.0.0-30-generic xhci-hcd
[ 0.536626] usb usb8: SerialNumber: 0000:6b:00.4
[ 0.536704] hub 8-0:1.0: USB hub found
[ 0.536732] hub 8-0:1.0: 1 port detected
[ 0.537300] i8042: PNP: No PS/2 controller found.
[ 0.537364] mousedev: PS/2 mouse device common for all mice
[ 0.537518] rtc_cmos 00:00: RTC can wake from S4
[ 0.537786] rtc_cmos 00:00: registered as rtc0
[ 0.537830] rtc_cmos 00:00: setting system clock to 2026-09-23T10:13:32 UTC (1790158412)
[ 0.537873] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram
[ 0.537880] i2c_dev: i2c /dev entries driver
[ 0.538001] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.538019] device-mapper: uevent: version 1.0.3
[ 0.538077] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[ 0.539304] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
[ 0.539318] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[ 0.542901] fbcon: Deferring console take-over
[ 0.542907] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.543033] drop_monitor: Initializing network drop monitor service
[ 0.543185] NET: Registered PF_INET6 protocol family
[ 0.543893] Segment Routing with IPv6
[ 0.543909] In-situ OAM (IOAM) with IPv6
[ 0.543949] NET: Registered PF_PACKET protocol family
[ 0.544034] Key type dns_resolver registered
[ 0.546719] x86/amd: Previous system reset reason [0x00080800]: software wrote 0x6 to reset control register 0xCF9
[ 0.546744] microcode: Current revision: 0x0a704108
[ 0.546746] microcode: Updated early from: 0x0a704107
[ 0.549982] resctrl: L3 allocation detected
[ 0.549987] resctrl: MB allocation detected
[ 0.549990] resctrl: SMBA allocation detected
[ 0.549992] resctrl: L3 monitoring detected
[ 0.550034] IPI shorthand broadcast: enabled
[ 0.552299] sched_clock: Marking stable (550735060, 1388138)->(571127875, -19004677)
[ 0.552605] registered taskstats version 1
[ 0.555290] Loading compiled-in X.509 certificates
[ 0.555706] Loaded X.509 cert 'Build time autogenerated kernel key: 95e77db4b9be914d2003459bdb9ea78076958bbb'
[ 0.556272] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing 2025 Kmod: d541cef61dc7e793b7eb7e899970a2eef0b5dc8c'
[ 0.556672] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 0.556930] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing 2025 Kmod: 4627603d2357a2a3f81006370894c221175893e9'
[ 0.557185] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 0.557187] blacklist: Loading compiled-in revocation X.509 certificates
[ 0.557212] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 0.557220] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[ 0.557228] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[ 0.557235] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[ 0.557243] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[ 0.557250] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[ 0.557258] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[ 0.557267] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[ 0.562054] Demotion targets for Node 0: null
[ 0.562110] Key type .fscrypt registered
[ 0.562112] Key type fscrypt-provisioning registered
[ 0.562184] Key type big_key registered
[ 0.562192] Key type trusted registered
[ 0.576295] Freeing initrd memory: 93252K
[ 0.590493] Key type encrypted registered
[ 0.590497] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.590507] Loading compiled-in module X.509 certificates
[ 0.591097] Loaded X.509 cert 'Build time autogenerated kernel key: 95e77db4b9be914d2003459bdb9ea78076958bbb'
[ 0.591101] ima: Allocated hash algorithm: sha256
[ 0.612870] ima: No architecture policies found
[ 0.612900] evm: Initialising EVM extended attributes:
[ 0.612902] evm: security.selinux
[ 0.612904] evm: security.SMACK64
[ 0.612906] evm: security.SMACK64EXEC
[ 0.612907] evm: security.SMACK64TRANSMUTE
[ 0.612909] evm: security.SMACK64MMAP
[ 0.612910] evm: security.apparmor
[ 0.612912] evm: security.ima
[ 0.612914] evm: security.capability
[ 0.612917] evm: HMAC attrs: 0x1
[ 0.613107] integrity: Loading X.509 certificate: UEFI:db
[ 0.613721] integrity: Loaded X.509 cert 'Database Key: 377080df5f3f4fd543f2b3742e69d841'
[ 0.613724] integrity: Loading X.509 certificate: UEFI:db
[ 0.613747] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.613750] integrity: Loading X.509 certificate: UEFI:db
[ 0.613768] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.613771] integrity: Loading X.509 certificate: UEFI:db
[ 0.613794] integrity: Loaded X.509 cert 'Microsoft Option ROM UEFI CA 2023: 514fbf937fa46fb57bf07af8bed84b3b864b1711'
[ 0.613796] integrity: Loading X.509 certificate: UEFI:db
[ 0.613814] integrity: Loaded X.509 cert 'Microsoft UEFI CA 2023: 81aa6b3244c935bce0d6628af39827421e32497d'
[ 0.613816] integrity: Loading X.509 certificate: UEFI:db
[ 0.613834] integrity: Loaded X.509 cert 'Microsoft Corporation: Windows UEFI CA 2023: aefc5fbbbe055d8f8daa585473499417ab5a5272'
[ 0.614342] PM: Magic number: 10:973:224
[ 0.614445] memory memory106: hash matches
[ 0.614738] RAS: Correctable Errors collector initialized.
[ 0.616202] clk: Disabling unused clocks
[ 0.616208] PM: genpd: Disabling unused power domains
[ 0.617422] Freeing unused decrypted memory: 2028K
[ 0.618019] Freeing unused kernel image (initmem) memory: 5292K
[ 0.618034] Write protecting the kernel read-only data: 43008k
[ 0.618485] Freeing unused kernel image (text/rodata gap) memory: 776K
[ 0.618767] Freeing unused kernel image (rodata/data gap) memory: 1668K
[ 0.658634] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.658642] Run /init as init process
[ 0.658644] with arguments:
[ 0.658645] /init
[ 0.658647] ---
[ 0.658648] splash
[ 0.658649] with environment:
[ 0.658650] HOME=/
[ 0.658651] TERM=linux
[ 0.770987] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 0.771040] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 0.869138] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WQ00 data block query control method not found
[ 0.871415] ACPI: video: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 0.872128] sdhci: Secure Digital Host Controller Interface driver
[ 0.872130] sdhci: Copyright(c) Pierre Ossman
[ 0.877122] input: Video Bus as /devices/pci0000:00/0000:00:01.1/acpi.video_bus.0/input/input3
[ 0.878188] sdhci-pci 0000:07:00.0: SDHCI controller found [17a0:9755] (rev 1)
[ 0.878304] sdhci-pci 0000:07:00.0: enabling device (0000 -> 0002)
[ 0.878765] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.879934] hid: raw HID events driver (C) Jiri Kosina
[ 0.880244] input: Video Bus as /devices/pci0000:00/0000:00:08.1/acpi.video_bus.1/input/input4
[ 0.891659] pcie_mp2_amd 0000:69:00.7: enabling device (0000 -> 0002)
[ 0.895377] ACPI: bus type thunderbolt registered
[ 0.895694] thunderbolt 0000:6b:00.6: total paths: 3
[ 0.895701] thunderbolt 0000:6b:00.6: IOMMU DMA protection is enabled
[ 0.897119] thunderbolt 0000:6b:00.6: allocating TX ring 0 of size 10
[ 0.897163] thunderbolt 0000:6b:00.6: allocating RX ring 0 of size 10
[ 0.897187] thunderbolt 0000:6b:00.6: control channel created
[ 0.897200] thunderbolt 0000:6b:00.6: using software connection manager
[ 0.900294] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=94.06
[ 0.900299] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.900301] usb 1-2: Product: USB2.1 Hub
[ 0.900302] usb 1-2: Manufacturer: GenesysLogic
[ 0.902007] mmc0: SDHCI controller on PCI [0000:07:00.0] using ADMA 64-bit
[ 0.909265] thunderbolt 0000:6b:00.6: created link from 0000:00:04.1
[ 0.909438] thunderbolt 0000:6b:00.6: NHI initialized, starting thunderbolt
[ 0.909441] thunderbolt 0000:6b:00.6: control channel starting...
[ 0.909442] thunderbolt 0000:6b:00.6: starting TX ring 0
[ 0.909449] thunderbolt 0000:6b:00.6: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[ 0.909452] thunderbolt 0000:6b:00.6: starting RX ring 0
[ 0.909458] thunderbolt 0000:6b:00.6: enabling interrupt at register 0x38200 bit 3 (0x1 -> 0x9)
[ 0.909464] thunderbolt 0000:6b:00.6: security level set to user
[ 0.909634] thunderbolt 0000:6b:00.6: current switch config:
[ 0.909635] thunderbolt 0000:6b:00.6: USB4 Switch: 438:20a (Revision: 0, TB Version: 32)
[ 0.909638] thunderbolt 0000:6b:00.6: Max Port Number: 7
[ 0.909639] thunderbolt 0000:6b:00.6: Config:
[ 0.909641] thunderbolt 0000:6b:00.6: Upstream Port Number: 1 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms
[ 0.909643] thunderbolt 0000:6b:00.6: unknown1: 0x0 unknown4: 0x0
[ 0.911198] thunderbolt 0000:6b:00.6: initializing Switch at 0x0 (depth: 0, up port: 1)
[ 0.912276] usb 3-1: New USB device found, idVendor=3277, idProduct=0018, bcdDevice= 0.03
[ 0.912284] usb 3-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 0.912288] usb 3-1: Product: USB2.0 FHD UVC WebCam
[ 0.912291] usb 3-1: Manufacturer: Sonix Technology Co., Ltd.
[ 0.912379] thunderbolt 0000:6b:00.6: 0: credit allocation parameters:
[ 0.912383] thunderbolt 0000:6b:00.6: 0: USB3: 24
[ 0.912386] thunderbolt 0000:6b:00.6: 0: DP AUX: 1
[ 0.912389] thunderbolt 0000:6b:00.6: 0: PCIe: 32
[ 0.912392] thunderbolt 0000:6b:00.6: 0: DMA: 32
[ 0.914592] thunderbolt 0000:6b:00.6: 0: uid: 0xa391189004381f66
[ 0.914855] thunderbolt 0000:6b:00.6: Port 1: 0:0 (Revision: 0, TB Version: 1, Type: NHI (0x2))
[ 0.914860] thunderbolt 0000:6b:00.6: Max hop id (in/out): 2/2
[ 0.914863] thunderbolt 0000:6b:00.6: Max counters: 3
[ 0.914866] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 0.914869] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 0.916173] thunderbolt 0000:6b:00.6: Port 2: 0:0 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 0.916177] thunderbolt 0000:6b:00.6: Max hop id (in/out): 16/16
[ 0.916180] thunderbolt 0000:6b:00.6: Max counters: 10
[ 0.916183] thunderbolt 0000:6b:00.6: NFC Credits: 0x88000000
[ 0.916186] thunderbolt 0000:6b:00.6: Credits (total/control): 128/2
[ 0.917336] thunderbolt 0000:6b:00.6: Port 3: 0:0 (Revision: 0, TB Version: 1, Type: Port (0x1))
[ 0.917340] thunderbolt 0000:6b:00.6: Max hop id (in/out): 16/16
[ 0.917343] thunderbolt 0000:6b:00.6: Max counters: 10
[ 0.917346] thunderbolt 0000:6b:00.6: NFC Credits: 0x88000000
[ 0.917348] thunderbolt 0000:6b:00.6: Credits (total/control): 128/2
[ 0.917597] thunderbolt 0000:6b:00.6: Port 4: 0:0 (Revision: 0, TB Version: 1, Type: USB (0x200101))
[ 0.917601] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 0.917604] thunderbolt 0000:6b:00.6: Max counters: 1
[ 0.917607] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 0.917610] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 0.917858] thunderbolt 0000:6b:00.6: Port 5: 0:0 (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[ 0.917862] thunderbolt 0000:6b:00.6: Max hop id (in/out): 8/8
[ 0.917865] thunderbolt 0000:6b:00.6: Max counters: 1
[ 0.917867] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 0.917870] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 0.918127] thunderbolt 0000:6b:00.6: Port 6: 0:0 (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[ 0.918131] thunderbolt 0000:6b:00.6: Max hop id (in/out): 9/8
[ 0.918134] thunderbolt 0000:6b:00.6: Max counters: 2
[ 0.918137] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 0.918139] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 0.918388] thunderbolt 0000:6b:00.6: Port 7: 0:0 (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[ 0.918392] thunderbolt 0000:6b:00.6: Max hop id (in/out): 9/8
[ 0.918395] thunderbolt 0000:6b:00.6: Max counters: 2
[ 0.918397] thunderbolt 0000:6b:00.6: NFC Credits: 0x0
[ 0.918400] thunderbolt 0000:6b:00.6: Credits (total/control): 0/0
[ 0.918403] thunderbolt 0000:6b:00.6: 0: running quirk_clx_disable [thunderbolt]
[ 0.918446] thunderbolt 0000:6b:00.6: 0: disabling CL states
[ 0.918449] thunderbolt 0000:6b:00.6: 0: linked ports 2 <-> 3
[ 0.920597] thunderbolt 0000:6b:00.6: 0: TMU: supports uni-directional mode
[ 0.920733] thunderbolt 0000:6b:00.6: 0: TMU: current mode: bi-directional, HiFi
[ 0.922645] thunderbolt 0000:6b:00.6: 0: TMU: mode change bi-directional, HiFi -> uni-directional, LowRes requested
[ 0.923081] thunderbolt 0000:6b:00.6: 0: TMU: mode set to: uni-directional, LowRes
[ 0.923469] thunderbolt 0000:6b:00.6: 0: resetting
[ 0.940287] thunderbolt 0000:6b:00.6: 0:6: DP IN resource available
[ 0.941286] thunderbolt 0000:6b:00.6: 0:7: DP IN resource available
[ 0.947067] hub 1-2:1.0: USB hub found
[ 0.947675] hub 1-2:1.0: 4 ports detected
[ 0.997159] i2c_hid_acpi i2c-ELAN9008:00: i2c_hid_get_input: IRQ triggered but there's no data
[ 0.997546] Key type psk registered
[ 0.998397] input: ASUE120A:00 04F3:327D Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-ASUE120A:00/0018:04F3:327D.0001/input/input5
[ 0.998595] input: ASUE120A:00 04F3:327D Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-ASUE120A:00/0018:04F3:327D.0001/input/input6
[ 0.998784] hid-generic 0018:04F3:327D.0001: input,hidraw0: I2C HID v1.00 Mouse [ASUE120A:00 04F3:327D] on i2c-ASUE120A:00
[ 0.999974] input: ELAN9008:00 04F3:40FD Touchscreen as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input7
[ 1.000164] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input8
[ 1.000226] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input9
[ 1.000294] input: ELAN9008:00 04F3:40FD Stylus as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input10
[ 1.000398] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input12
[ 1.000469] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input13
[ 1.000534] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input14
[ 1.006054] nvme 0000:08:00.0: platform quirk: setting simple suspend
[ 1.006139] nvme nvme0: pci function 0000:08:00.0
[ 1.011319] usb 2-2: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[ 1.025543] usb 2-2: New USB device found, idVendor=05e3, idProduct=0625, bcdDevice=94.06
[ 1.025548] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.025552] usb 2-2: Product: USB3.2 Hub
[ 1.025555] usb 2-2: Manufacturer: GenesysLogic
[ 1.034403] hid-generic 0018:04F3:40FD.0002: input,hidraw1: I2C HID v1.00 Device [ELAN9008:00 04F3:40FD] on i2c-ELAN9008:00
[ 1.041074] nvme nvme0: allocated 64 MiB host memory buffer (1 segment).
[ 1.042867] hub 2-2:1.0: USB hub found
[ 1.043177] hub 2-2:1.0: 4 ports detected
[ 1.043782] nvme nvme0: 16/0/0 default/read/poll queues
[ 1.048405] nvme0n1: p1 p2 p3 p5 p6 p7 p8
[ 1.096647] input: ASUE120A:00 04F3:327D Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-ASUE120A:00/0018:04F3:327D.0001/input/input16
[ 1.096794] input: ASUE120A:00 04F3:327D Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-ASUE120A:00/0018:04F3:327D.0001/input/input17
[ 1.096944] hid-multitouch 0018:04F3:327D.0001: input,hidraw0: I2C HID v1.00 Mouse [ASUE120A:00 04F3:327D] on i2c-ASUE120A:00
[ 1.135492] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[ 1.179105] input: ELAN9008:00 04F3:40FD as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input18
[ 1.179202] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input19
[ 1.179258] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input20
[ 1.179320] input: ELAN9008:00 04F3:40FD Stylus as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input21
[ 1.179417] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input23
[ 1.179483] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input24
[ 1.179541] input: ELAN9008:00 04F3:40FD UNKNOWN as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN9008:00/0018:04F3:40FD.0002/input/input25
[ 1.213777] hid-multitouch 0018:04F3:40FD.0002: input,hidraw1: I2C HID v1.00 Device [ELAN9008:00 04F3:40FD] on i2c-ELAN9008:00
[ 1.286071] usb 1-3: New USB device found, idVendor=0b05, idProduct=19b6, bcdDevice= 0.02
[ 1.286088] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.286095] usb 1-3: Product: N-KEY Device
[ 1.286101] usb 1-3: Manufacturer: ASUSTeK Computer Inc.
[ 1.353954] usb 1-2.4: new high-speed USB device number 4 using xhci_hcd
[ 1.461324] usb 1-2.4: New USB device found, idVendor=3151, idProduct=5029, bcdDevice= 5.00
[ 1.461334] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.461337] usb 1-2.4: Product: MG68
[ 1.461339] usb 1-2.4: Manufacturer:
[ 1.490926] tsc: Refined TSC clocksource calibration: 3992.471 MHz
[ 1.490949] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x73192991fbc, max_idle_ns: 881591058326 ns
[ 1.491134] clocksource: Switched to clocksource tsc
[ 1.522690] usb 2-2.2: new SuperSpeed USB device number 3 using xhci_hcd
[ 1.536221] usb 2-2.2: New USB device found, idVendor=30de, idProduct=6545, bcdDevice= 1.10
[ 1.536230] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.536233] usb 2-2.2: Product: TransMemory
[ 1.536236] usb 2-2.2: Manufacturer: KIOXIA
[ 1.536238] usb 2-2.2: SerialNumber: <USB_SERIAL_REDACTED>
[ 1.571305] mmc0: new UHS-I speed SDR104 SDXC card at address aaaa
[ 1.576872] mmcblk0: mmc0:aaaa SD128 119 GiB
[ 1.578277] mmcblk0: p1
[ 1.593479] usb-storage 2-2.2:1.0: USB Mass Storage device detected
[ 1.593715] scsi host0: usb-storage 2-2.2:1.0
[ 1.593848] usbcore: registered new interface driver usb-storage
[ 1.595220] usbcore: registered new interface driver uas
[ 1.667029] usb 1-4: new full-speed USB device number 5 using xhci_hcd
[ 1.805095] usb 1-4: New USB device found, idVendor=0489, idProduct=e10a, bcdDevice= 0.01
[ 1.805104] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.829163] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0003/input/input27
[ 1.829314] input: ASUSTeK Computer Inc. N-KEY Device Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0003/input/input28
[ 1.880281] input: ASUSTeK Computer Inc. N-KEY Device Wireless Radio Control as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0003/input/input29
[ 1.880491] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0003/input/input30
[ 1.880622] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0003/input/input31
[ 1.880844] hid-generic 0003:0B05:19B6.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input0
[ 1.885582] hid-generic 0003:0B05:19B6.0004: hiddev1,hidraw3: USB HID v1.10 Device [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input1
[ 1.890099] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.2/0003:0B05:19B6.0005/input/input32
[ 1.941456] hid-generic 0003:0B05:19B6.0005: input,hidraw4: USB HID v1.10 Keyboard [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input2
[ 1.946959] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.3/0003:0B05:19B6.0006/input/input33
[ 1.947327] hid-generic 0003:0B05:19B6.0006: input,hidraw5: USB HID v1.10 Mouse [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input3
[ 1.948567] input: MG68 as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2.4/1-2.4:1.0/0003:3151:5029.0007/input/input34
[ 2.000332] hid-generic 0003:3151:5029.0007: input,hidraw6: USB HID v1.11 Keyboard [ MG68] on usb-0000:69:00.3-2.4/input0
[ 2.001702] hid-generic 0003:3151:5029.0008: ignoring exceeding usage max
[ 2.002458] input: MG68 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2.4/1-2.4:1.1/0003:3151:5029.0008/input/input35
[ 2.054326] input: MG68 System Control as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2.4/1-2.4:1.1/0003:3151:5029.0008/input/input36
[ 2.054532] input: MG68 Keyboard as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2.4/1-2.4:1.1/0003:3151:5029.0008/input/input37
[ 2.054646] input: MG68 Mouse as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2.4/1-2.4:1.1/0003:3151:5029.0008/input/input38
[ 2.054778] input: MG68 as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-2/1-2.4/1-2.4:1.1/0003:3151:5029.0008/input/input39
[ 2.054986] hid-generic 0003:3151:5029.0008: input,hiddev2,hidraw7: USB HID v1.11 Keyboard [ MG68] on usb-0000:69:00.3-2.4/input1
[ 2.056098] hid-generic 0003:3151:5029.0009: hiddev3,hidraw8: USB HID v1.11 Device [ MG68] on usb-0000:69:00.3-2.4/input2
[ 2.056148] usbcore: registered new interface driver usbhid
[ 2.056151] usbhid: USB HID core driver
[ 2.066041] asus_wmi: ASUS WMI generic driver loaded
[ 2.119872] asus 0003:0B05:19B6.0003: Fixing up Asus N-Key report descriptor
[ 2.122640] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.0/0003:0B05:19B6.0003/input/input40
[ 2.174733] asus 0003:0B05:19B6.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input0
[ 2.199517] asus 0003:0B05:19B6.0004: hiddev1,hidraw3: USB HID v1.10 Device [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input1
[ 2.227147] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.2/0003:0B05:19B6.0005/input/input41
[ 2.278486] asus 0003:0B05:19B6.0005: input,hidraw4: USB HID v1.10 Keyboard [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input2
[ 2.293672] input: ASUSTeK Computer Inc. N-KEY Device as /devices/pci0000:00/0000:00:08.1/0000:69:00.3/usb1/1-3/1-3:1.3/0003:0B05:19B6.0006/input/input42
[ 2.294071] asus 0003:0B05:19B6.0006: input,hidraw5: USB HID v1.10 Mouse [ASUSTeK Computer Inc. N-KEY Device] on usb-0000:69:00.3-3/input3
[ 2.368419] raid6: avx512x4 gen() 51380 MB/s
[ 2.385390] raid6: avx512x2 gen() 53154 MB/s
[ 2.402415] raid6: avx512x1 gen() 51711 MB/s
[ 2.419413] raid6: avx2x4 gen() 53838 MB/s
[ 2.436413] raid6: avx2x2 gen() 47598 MB/s
[ 2.453414] raid6: avx2x1 gen() 34467 MB/s
[ 2.453416] raid6: using algorithm avx2x4 gen() 53838 MB/s
[ 2.470414] raid6: .... xor() 5085 MB/s, rmw enabled
[ 2.470415] raid6: using avx512x2 recovery algorithm
[ 2.471326] xor: automatically using best checksumming function avx
[ 2.472001] async_tx: api initialized (async)
[ 2.644121] scsi 0:0:0:0: Direct-Access KIOXIA TransMemory PMAP PQ: 0 ANSI: 6
[ 2.644839] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.645474] sd 0:0:0:0: [sda] 243990528 512-byte logical blocks: (125 GB/116 GiB)
[ 2.645702] sd 0:0:0:0: [sda] Write Protect is off
[ 2.645717] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00
[ 2.645932] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.678852] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 2.678857] GPT:12660955 != 243990527
[ 2.678861] GPT:Alternate GPT header not at the end of the disk.
[ 2.678864] GPT:12660955 != 243990527
[ 2.678866] GPT: Use GNU Parted to correct GPT errors.
[ 2.678875] sda: sda1 sda2 sda3
[ 2.679119] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.090239] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 4.090753] ISO 9660 Extensions: RRIP_1991A
[ 4.478729] sda: sda1 sda2 sda3 sda4
[ 7.443282] hid-generic 0020:1022:0001.000A: hidraw9: SENSOR HUB HID v0.00 Device [hid-amdsfh 1022:0001] on pcie_mp2_amd
[ 7.447788] hid-sensor-hub 0020:1022:0001.000A: hidraw9: SENSOR HUB HID v0.00 Device [hid-amdsfh 1022:0001] on pcie_mp2_amd
[ 19.187254] thunderbolt 0000:6b:00.6: 0: suspending switch
[ 19.187274] thunderbolt 0000:6b:00.6: 0: enabling wakeup: 0x3f
[ 19.187975] thunderbolt 0000:6b:00.6: stopping RX ring 0
[ 19.187996] thunderbolt 0000:6b:00.6: disabling interrupt at register 0x38200 bit 3 (0x9 -> 0x1)
[ 19.188034] thunderbolt 0000:6b:00.6: stopping TX ring 0
[ 19.188043] thunderbolt 0000:6b:00.6: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[ 19.188065] thunderbolt 0000:6b:00.6: control channel stopped
[ 156.010014] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 156.010593] ISO 9660 Extensions: RRIP_1991A
[ 156.032213] loop0: detected capacity change from 0 to 6703392
[ 156.061247] loop1: detected capacity change from 0 to 1152448
[ 156.089566] loop2: detected capacity change from 0 to 1549048
[ 156.100539] overlayfs: null uuid in non-single lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 158.030689] EXT4-fs (sda4): mounted filesystem b5e9fe32-1609-4d41-b565-c6207f53c1c7 r/w with ordered data mode. Quota mode: none.
[ 158.386967] evm: overlay not supported
[ 168.991782] systemd[1]: Inserted module 'autofs4'
[ 169.350090] systemd[1]: systemd 259.5-0ubuntu3.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 169.350130] systemd[1]: Detected architecture x86-64.
[ 169.355528] systemd[1]: Initializing machine ID from random generator.
[ 169.355609] systemd[1]: Hostname set to <ubuntu>.
[ 169.422988] systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported.
[ 169.731781] systemd[1]: /usr/lib/systemd/system/xfs_scrub_all.service:26: Support for option CPUAccounting= has been removed and it is ignored
[ 169.732233] systemd[1]: /usr/lib/systemd/system/system-xfs_scrub.slice:15: Support for option CPUAccounting= has been removed and it is ignored
[ 169.829424] systemd[1]: Queued start job for default target graphical.target.
[ 169.837782] systemd[1]: Created slice system-cups.slice - CUPS Slice.
[ 169.838141] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 169.838517] systemd[1]: Created slice system-xfs_scrub.slice - xfs_scrub background service slice.
[ 169.838731] systemd[1]: Created slice user.slice - User and Session Slice.
[ 169.838773] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 169.838925] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 169.838944] systemd[1]: Reached target imports.target - Image Downloads.
[ 169.838951] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 169.838966] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 169.838972] systemd[1]: Reached target slices.target - Slice Units.
[ 169.838985] systemd[1]: Reached target swap.target - Swaps.
[ 169.838993] systemd[1]: Reached target time-set.target - System Time Set.
[ 169.839013] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 169.839077] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[ 169.839118] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[ 169.839176] systemd[1]: Listening on syslog.socket - Syslog Socket.
[ 169.840260] systemd[1]: Listening on systemd-ask-password.socket - Query the User Interactively for a Password.
[ 169.840582] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 169.840994] systemd[1]: Listening on systemd-factory-reset.socket - Factory Reset Management.
[ 169.841040] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 169.841093] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 169.841583] systemd[1]: Listening on systemd-mute-console.socket - Console Output Muting Service Socket.
[ 169.841653] systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
[ 169.841679] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.841688] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.841727] systemd[1]: Listening on systemd-resolved-monitor.socket - Resolve Monitor Varlink Socket.
[ 169.841757] systemd[1]: Listening on systemd-resolved-varlink.socket - Resolve Service Varlink Socket.
[ 169.841802] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 169.841839] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 169.841875] systemd[1]: Listening on systemd-udevd-varlink.socket - udev Varlink Socket.
[ 169.845680] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 169.846647] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 169.847280] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 169.847916] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 169.849296] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 169.849886] systemd[1]: Starting blk-availability.service - Availability of block devices...
[ 169.850524] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 169.862401] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 169.862952] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 169.862971] systemd[1]: modprobe@configfs.service - Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs
[ 169.863533] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 169.863551] systemd[1]: modprobe@drm.service - Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
[ 169.864098] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 169.864115] systemd[1]: modprobe@fuse.service - Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
[ 169.864630] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 169.864736] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
[ 169.873585] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 169.873602] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.873624] systemd[1]: systemd-pcrproduct.service - TPM NvPCR Product ID Measurement skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.874249] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 169.874310] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.875336] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 169.875988] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 169.912645] systemd[1]: Finished blk-availability.service - Availability of block devices.
[ 169.916327] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 169.917119] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 169.942514] pstore: Using crash dump compression: deflate
[ 169.943798] pstore: Registered efi_pstore as persistent store backend
[ 169.944199] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 169.944352] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 169.955240] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 169.955334] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 169.955413] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 169.955486] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 169.955555] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 169.955626] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 169.961230] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 169.964560] systemd[1]: Starting cloud-init-main.service - Cloud-init: Single Process...
[ 169.968991] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database skipped, no trigger condition checks were met.
[ 169.969062] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
[ 169.972282] systemd-journald[1356]: Collecting audit messages is disabled.
[ 169.974058] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 169.974074] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.974087] systemd[1]: systemd-pcrnvdone.service - TPM PCR NvPCR Initialization Separator skipped, unmet condition check ConditionSecurity=measured-uki
[ 169.974410] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 169.984602] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ 169.996800] ppdev: user-space parallel port driver
[ 169.996893] lp: driver loaded but no devices found
[ 169.997684] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 169.998598] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 170.002225] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 170.010444] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 170.011853] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 170.033049] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[ 170.034624] systemd[1]: Starting systemd-oomd.service - Userspace Out-Of-Memory (OOM) Killer...
[ 170.035281] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 170.035574] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 170.036779] systemd[1]: Starting systemd-resolved.service - Network Name Resolution...
[ 170.046835] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ 170.047898] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[ 170.049172] systemd[1]: Finished lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 170.049244] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[ 170.062208] systemd[1]: Started systemd-journald.service - Journal Service.
[ 170.092643] systemd-journald[1356]: Received client request to flush runtime journal.
[ 174.060583] Serial bus multi instantiate pseudo device driver CSC3551:00: Instantiated 2 I2C devices.
[ 174.138145] asus_wmi: Initialization: 0x1
[ 174.138217] asus_wmi: BIOS WMI version: 9.0
[ 174.138268] asus_wmi: SFUN value: 0x21
[ 174.138271] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 174.159749] asus-nb-wmi asus-nb-wmi: Using throttle_thermal_policy for platform_profile support
[ 174.165952] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 174.165957] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 174.172729] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 174.188329] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 174.191779] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input43
[ 174.238021] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 174.238027] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 174.238029] RAPL PMU: hw unit of domain core 2^-16 Joules
[ 174.242352] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Adding DSD properties for 10431533
[ 174.242356] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Cannot add Reset/Speaker ID/SPI CS GPIO Mapping, _DSD already exists.
[ 174.244131] asus_wmi: fan_curve_get_factory_default (0x00110032) failed: -19
[ 174.244194] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Using extra _DSD properties, bypassing _DSD in ACPI
[ 174.314911] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Cirrus Logic CS35L41 (35a40), Revision: B2
[ 174.315091] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Adding DSD properties for 10431533
[ 174.315094] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Cannot add Reset/Speaker ID/SPI CS GPIO Mapping, _DSD already exists.
[ 174.315243] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Using extra _DSD properties, bypassing _DSD in ACPI
[ 174.315245] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Reset line busy, assuming shared reset
[ 174.342422] ccp 0000:69:00.2: enabling device (0000 -> 0002)
[ 174.344981] ccp 0000:69:00.2: tee enabled
[ 174.345424] ccp 0000:69:00.2: psp enabled
[ 174.389591] kvm_amd: TSC scaling supported
[ 174.389597] kvm_amd: Nested Virtualization enabled
[ 174.389600] kvm_amd: Nested Paging enabled
[ 174.389603] kvm_amd: LBR virtualization supported
[ 174.389608] kvm_amd: [Firmware Bug]: Cannot enable x2AVIC, AVIC is unsupported
[ 174.389610] kvm_amd: Virtual GIF supported
[ 174.389611] kvm_amd: Virtual NMI enabled
[ 174.399120] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Cirrus Logic CS35L41 (35a40), Revision: B2
[ 174.415578] MCE: In-kernel MCE decoding enabled.
[ 174.485915] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 174.486116] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 174.486217] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 174.521328] amd_atl: AMD Address Translation Library initialized
[ 174.521357] Bluetooth: Core ver 2.22
[ 174.521502] NET: Registered PF_BLUETOOTH protocol family
[ 174.521504] Bluetooth: HCI device and connection manager initialized
[ 174.521509] Bluetooth: HCI socket layer initialized
[ 174.521512] Bluetooth: L2CAP socket layer initialized
[ 174.521518] Bluetooth: SCO socket layer initialized
[ 174.525485] mc: Linux media interface: v0.10
[ 174.527665] amdxdna 0000:6a:00.1: [drm] Load firmware amdnpu/1502_00/npu_7.sbin
[ 174.527678] amdxdna 0000:6a:00.1: enabling device (0000 -> 0002)
[ 174.559664] intel_rapl_common: Found RAPL domain package
[ 174.559669] intel_rapl_common: Found RAPL domain core
[ 174.559830] videodev: Linux video capture interface: v2.00
[ 174.559886] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 174.560578] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 174.560591] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 174.561076] snd_hda_intel 0000:69:00.1: enabling device (0000 -> 0002)
[ 174.563784] snd_hda_intel 0000:69:00.1: Handle vga_switcheroo audio client
[ 174.600319] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:69:00.1/sound/card1/input44
[ 174.600405] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:69:00.1/sound/card1/input45
[ 174.604007] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input46
[ 174.604170] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input47
[ 174.604447] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input48
[ 174.604631] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input49
[ 174.624483] usbcore: registered new interface driver btusb
[ 174.628551] uvcvideo 3-1:1.0: Found UVC 1.00 device USB2.0 FHD UVC WebCam (3277:0018)
[ 174.650670] uvcvideo 3-1:1.2: Found UVC 1.00 device USB2.0 FHD UVC WebCam (3277:0018)
[ 174.658583] usbcore: registered new interface driver uvcvideo
[ 174.669047] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00190200.bin
[ 174.669053] Bluetooth: hci0: QCA: patch rome 0x190200 build 0x8567, firmware rome 0x190200 build 0x43fb
[ 174.680798] [drm] Initialized amdxdna_accel_driver 0.7.0 for 0000:6a:00.1 on minor 0
[ 174.715270] snd_hda_codec_alc269 hdaudioC2D0: ALC294: picked fixup for PCI SSID 1043:1533
[ 174.715466] ath12k_wifi7_pci 0000:06:00.0: BAR 0 [mem 0xdda00000-0xddbfffff 64bit]: assigned
[ 174.715487] ath12k_wifi7_pci 0000:06:00.0: enabling device (0000 -> 0002)
[ 174.715525] ath12k_wifi7_pci 0000:06:00.0: Wi-Fi 7 Hardware name: wcn7850 hw2.0
[ 174.715879] ath12k_wifi7_pci 0000:06:00.0: MSI vectors: 16
[ 174.717349] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 174.717358] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.GPP0.PEGP handle
[ 174.717359] nouveau: detected PR support, will not use DSM
[ 174.717391] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[ 174.717500] nouveau 0000:01:00.0: NVIDIA AD107 (197000a1)
[ 174.781862] snd_pci_ps 0000:69:00.5: enabling device (0000 -> 0002)
[ 174.782091] acpi device:2e: Failed to read mipi-sdw-manager-list: -22
[ 174.797174] NET: Registered PF_QIPCRTR protocol family
[ 174.853208] mhi mhi0: Requested to power ON
[ 174.853222] mhi mhi0: Power on setup success
[ 175.001407] mhi mhi0: Wait for device to enter SBL or Mission mode
[ 175.031251] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw: format 3 timestamp 0x6128e16b
[ 175.031258] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
[ 175.113725] nouveau 0000:01:00.0: gsp: RM version: 570.144
[ 175.241261] nouveau 0000:01:00.0: bios: version 95.07.26.00.1b
[ 175.296474] ACPI: battery: new hook: ASUS Battery Extension
[ 175.317162] Bluetooth: hci0: using NVM file: qca/nvm_usb_00190200.bin
[ 175.458438] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 176.009858] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
[ 176.012177] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533-spkid1-l0.bin (v1): v0.43.1
[ 176.012180] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: C:\Users\dchunyi\Documents\Asus_ROG\Project\GV302\Tuning\20220916\10431533_220916_V1_A0.bin
[ 176.155470] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Calibration applied: R0=10386
[ 176.177031] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Firmware Loaded - Type: spk-prot, Gain: 17
[ 176.177104] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: CS35L41 Bound - SSID: 10431533, BST: 0, VSPK: 0, CH: L, FW EN: 1, SPKID: 1
[ 176.177112] snd_hda_codec_alc269 hdaudioC2D0: bound i2c-CSC3551:00-cs35l41-hda.0 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[ 176.191218] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw: format 3 timestamp 0x6128e16b
[ 176.191227] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
[ 176.229453] nouveau 0000:01:00.0: drm: VRAM: 8188 MiB
[ 176.229456] nouveau 0000:01:00.0: drm: GART: 536870912 MiB
[ 176.257838] nouveau 0000:01:00.0: drm: MM: using COPY for buffer copies
[ 176.329689] amdgpu: vga_switcheroo: detected switching method \_SB_.PCI0.GP17.VGA_.ATPX handle
[ 176.329890] amdgpu: ATPX version 1, functions 0x00000801
[ 176.329999] amdgpu: ATPX Hybrid Graphics
[ 176.340810] amdgpu: Virtual CRAT table created for CPU
[ 176.340828] amdgpu: Topology: Add CPU node
[ 176.340996] amdgpu 0000:69:00.0: enabling device (0006 -> 0007)
[ 176.341048] amdgpu 0000:69:00.0: initializing kernel modesetting (IP DISCOVERY 0x1002:0x15BF 0x1043:0x1533 0xC6).
[ 176.341253] amdgpu 0000:69:00.0: register mmio base: 0xDD800000
[ 176.341255] amdgpu 0000:69:00.0: register mmio size: 524288
[ 176.342983] ath12k_wifi7_pci 0000:06:00.0: chip_id 0x2 chip_family 0x4 board_id 0xff soc_id 0x40170200
[ 176.342990] ath12k_wifi7_pci 0000:06:00.0: fw_version 0x1103006c fw_build_timestamp 2026-03-06 09:10 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
[ 176.345279] amdgpu 0000:69:00.0: detected ip block number 0 <common_v1_0_0> (soc21_common)
[ 176.345283] amdgpu 0000:69:00.0: detected ip block number 1 <gmc_v11_0_0> (gmc_v11_0)
[ 176.345286] amdgpu 0000:69:00.0: detected ip block number 2 <ih_v6_0_0> (ih_v6_0)
[ 176.345288] amdgpu 0000:69:00.0: detected ip block number 3 <psp_v13_0_4> (psp)
[ 176.345291] amdgpu 0000:69:00.0: detected ip block number 4 <smu_v13_0_0> (smu)
[ 176.345294] amdgpu 0000:69:00.0: detected ip block number 5 <dce_v1_0_0> (dm)
[ 176.345297] amdgpu 0000:69:00.0: detected ip block number 6 <gfx_v11_0_0> (gfx_v11_0)
[ 176.345300] amdgpu 0000:69:00.0: detected ip block number 7 <sdma_v6_0_0> (sdma_v6_0)
[ 176.345303] amdgpu 0000:69:00.0: detected ip block number 8 <vcn_v4_0_0> (vcn_v4_0)
[ 176.345306] amdgpu 0000:69:00.0: detected ip block number 9 <jpeg_v4_0_0> (jpeg_v4_0)
[ 176.345308] amdgpu 0000:69:00.0: detected ip block number 10 <mes_v11_0_0> (mes_v11_0)
[ 176.345350] amdgpu 0000:69:00.0: Fetched VBIOS from VFCT
[ 176.345354] amdgpu 0000:69:00.0: [drm] ATOM BIOS: 113-PHXGENERIC-001
[ 176.381041] amdgpu 0000:69:00.0: vgaarb: deactivate vga console
[ 176.381047] amdgpu 0000:69:00.0: Trusted Memory Zone (TMZ) feature enabled
[ 176.381101] amdgpu 0000:69:00.0: vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 176.381127] amdgpu 0000:69:00.0: VRAM: 512M 0x0000008000000000 - 0x000000801FFFFFFF (512M used)
[ 176.381130] amdgpu 0000:69:00.0: GART: 512M 0x00007FFF00000000 - 0x00007FFF1FFFFFFF
[ 176.381152] amdgpu 0000:69:00.0: [drm] Detected VRAM RAM=512M, BAR=512M
[ 176.381154] amdgpu 0000:69:00.0: [drm] RAM width 128bits LPDDR5
[ 176.381273] amdgpu 0000:69:00.0: 512M of VRAM memory ready
[ 176.381277] amdgpu 0000:69:00.0: 7589M of GTT memory ready.
[ 176.381302] amdgpu 0000:69:00.0: [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 176.381869] amdgpu 0000:69:00.0: [drm] PCIE GART of 512M enabled (table at 0x000000801FD00000).
[ 176.382412] amdgpu 0000:69:00.0: [drm] Loading DMUB firmware via PSP: version=0x08005700
[ 176.382878] amdgpu 0000:69:00.0: [VCN instance 0] Found VCN firmware Version ENC: 1.24 DEC: 9 VEP: 0 Revision: 16
[ 176.382975] amdgpu 0000:69:00.0: MES: vmid_mask_mmhub 0x0000ff00, vmid_mask_gfxhub 0x0000ff00
[ 176.382978] amdgpu 0000:69:00.0: MES: gfx_hqd_mask 0x00000002, compute_hqd_mask 0x0000000c, sdma_hqd_mask 0x000000fc
[ 176.407417] amdgpu 0000:69:00.0: reserve 0x4a00000 from 0x8010000000 for PSP TMR
[ 176.545041] debugfs: 'simulate_fw_crash' already exists in 'pci-0000:06:00.0'
[ 176.545065] debugfs: 'device_dp_stats' already exists in 'pci-0000:06:00.0'
[ 176.545339] ieee80211 phy0: copying sband (band 1) due to VHT EXT NSS BW flag
[ 176.551215] ath12k_wifi7_pci 0000:06:00.0 wlp6s0: renamed from wlan0
[ 176.987648] amdgpu 0000:69:00.0: RAS: optional ras ta ucode is not available
[ 176.995954] amdgpu 0000:69:00.0: RAP: optional rap ta ucode is not available
[ 176.995958] amdgpu 0000:69:00.0: SECUREDISPLAY: optional securedisplay ta ucode is not available
[ 177.024462] amdgpu 0000:69:00.0: SMU is initialized successfully!
[ 177.026264] amdgpu 0000:69:00.0: [drm] Display Core v3.2.369 initialized on DCN 3.1.4
[ 177.026270] amdgpu 0000:69:00.0: [drm] DP-HDMI FRL PCON supported
[ 177.028446] amdgpu 0000:69:00.0: [drm] DMUB hardware initialized: version=0x08005700
[ 177.171113] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
[ 177.173438] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431533-spkid1-r0.bin (v1): v0.43.1
[ 177.173446] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: C:\Users\dchunyi\Documents\Asus_ROG\Project\GV302\Tuning\20220916\10431533_220916_V1_A1.bin
[ 177.316027] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Calibration applied: R0=10318
[ 177.336972] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Firmware Loaded - Type: spk-prot, Gain: 17
[ 177.337041] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: CS35L41 Bound - SSID: 10431533, BST: 0, VSPK: 0, CH: R, FW EN: 1, SPKID: 1
[ 177.337047] snd_hda_codec_alc269 hdaudioC2D0: bound i2c-CSC3551:00-cs35l41-hda.1 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[ 177.337115] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[ 177.337522] snd_hda_codec_alc269 hdaudioC2D0: autoconfig for ALC294: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 177.337530] snd_hda_codec_alc269 hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 177.337535] snd_hda_codec_alc269 hdaudioC2D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 177.337540] snd_hda_codec_alc269 hdaudioC2D0: mono: mono_out=0x0
[ 177.337544] snd_hda_codec_alc269 hdaudioC2D0: inputs:
[ 177.337549] snd_hda_codec_alc269 hdaudioC2D0: Internal Mic=0x12
[ 177.337553] snd_hda_codec_alc269 hdaudioC2D0: Internal Mic=0x13
[ 177.337813] snd_hda_intel 0000:69:00.1: bound 0000:69:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 177.339996] nouveau 0000:01:00.0: [drm] Registered 4 planes with drm panic
[ 177.340001] [drm] Initialized nouveau 1.4.2 for 0000:01:00.0 on minor 1
[ 177.341787] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 177.347171] thunderbolt 0000:6b:00.6: display driver bound, retrying DP tunneling
[ 177.347176] thunderbolt 0000:6b:00.6: looking for DP IN <-> DP OUT pairs:
[ 177.347178] thunderbolt 0000:6b:00.6: no suitable DP IN adapter available, not tunneling
[ 177.348022] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 177.348197] nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 177.422119] amdgpu 0000:69:00.0: [drm] eDP-2: PSR support 1, DC PSR ver 0, sink PSR ver 4 DPCD caps 0x3a su_y_granularity 4
[ 177.422291] amdgpu 0000:69:00.0: [drm] HDMI-A-2: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.422398] amdgpu 0000:69:00.0: [drm] DP-1: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.422519] amdgpu 0000:69:00.0: [drm] DP-2: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.422711] amdgpu 0000:69:00.0: [drm] DP-3: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.422793] amdgpu 0000:69:00.0: [drm] DP-4: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.422879] amdgpu 0000:69:00.0: [drm] DP-5: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.422967] amdgpu 0000:69:00.0: [drm] DP-6: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.423052] amdgpu 0000:69:00.0: [drm] DP-7: PSR support 0, DC PSR ver -1, sink PSR ver 0 DPCD caps 0x0 su_y_granularity 0
[ 177.428659] kfd kfd: Allocated 3969056 bytes on gart
[ 177.428674] kfd kfd: Total number of KFD nodes to be created: 1
[ 177.428794] amdgpu: Virtual CRAT table created for GPU
[ 177.429149] amdgpu: Topology: Add GPU node [0x1002:0x15bf]
[ 177.429151] kfd kfd: added device 1002:15bf
[ 177.429159] amdgpu 0000:69:00.0: SE 1, SH per SE 2, CU per SH 6, active_cu_number 12
[ 177.429171] amdgpu 0000:69:00.0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 177.429173] amdgpu 0000:69:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 177.429175] amdgpu 0000:69:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 177.429176] amdgpu 0000:69:00.0: ring comp_1.2.0 uses VM inv eng 6 on hub 0
[ 177.429178] amdgpu 0000:69:00.0: ring comp_1.3.0 uses VM inv eng 7 on hub 0
[ 177.429179] amdgpu 0000:69:00.0: ring comp_1.0.1 uses VM inv eng 8 on hub 0
[ 177.429181] amdgpu 0000:69:00.0: ring comp_1.1.1 uses VM inv eng 9 on hub 0
[ 177.429182] amdgpu 0000:69:00.0: ring comp_1.2.1 uses VM inv eng 10 on hub 0
[ 177.429184] amdgpu 0000:69:00.0: ring comp_1.3.1 uses VM inv eng 11 on hub 0
[ 177.429185] amdgpu 0000:69:00.0: ring sdma0 uses VM inv eng 12 on hub 0
[ 177.429187] amdgpu 0000:69:00.0: ring vcn_unified_0 uses VM inv eng 0 on hub 8
[ 177.429189] amdgpu 0000:69:00.0: ring jpeg_dec uses VM inv eng 1 on hub 8
[ 177.429190] amdgpu 0000:69:00.0: ring mes_kiq_3.1.0 uses VM inv eng 13 on hub 0
[ 177.430703] amdgpu 0000:69:00.0: Runtime PM not available
[ 177.430953] amdgpu 0000:69:00.0: [drm] Skipping amdgpu DM backlight registration
[ 177.432254] amdgpu 0000:69:00.0: [drm] Registered 4 planes with drm panic
[ 177.432257] [drm] Initialized amdgpu 3.64.0 for 0000:69:00.0 on minor 2
[ 177.439859] fbcon: amdgpudrmfb (fb0) is primary device
[ 177.439862] fbcon: Deferring console take-over
[ 177.439865] amdgpu 0000:69:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 177.459172] [drm] pre_validate_dsc:1667 MST_DSC dsc precompute is not needed
[ 177.788778] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:69:00.6/sound/card2/input50
[ 178.103349] spl: loading out-of-tree module taints kernel.
[ 178.170292] zfs: module license 'CDDL' taints kernel.
[ 178.170298] Disabling lock debugging due to kernel taint
[ 178.170308] zfs: module license taints kernel.
[ 178.534734] ZFS: Loaded module v2.4.1-1ubuntu5, ZFS pool version 5000, ZFS filesystem version 5
[ 178.534738] ZFS: Using ZFS with kernel 7.0.0-30-generic is EXPERIMENTAL and SERIOUS DATA LOSS may occur!
[ 178.534739] ZFS: Please report your results at: https://github.com/openzfs/zfs/issues/new
[ 178.569843] loop3: detected capacity change from 0 to 40880
[ 178.569909] loop4: detected capacity change from 0 to 136816
[ 178.569964] loop5: detected capacity change from 0 to 8
[ 178.570371] loop6: detected capacity change from 0 to 33792
[ 178.570445] loop7: detected capacity change from 0 to 533120
[ 178.596220] loop8: detected capacity change from 0 to 1258560
[ 178.611037] loop13: detected capacity change from 0 to 823256
[ 178.611061] loop9: detected capacity change from 0 to 187776
[ 178.611087] loop12: detected capacity change from 0 to 3088
[ 178.611233] loop11: detected capacity change from 0 to 24184
[ 179.787754] audit: type=1400 audit(1790158591.749:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.hwctl" pid=2657 comm="apparmor_parser"
[ 179.788925] audit: type=1400 audit(1790158591.750:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.ubuntu-desktop-bootstrap" pid=2663 comm="apparmor_parser"
[ 179.790055] audit: type=1400 audit(1790158591.751:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.mesa-2404" pid=2658 comm="apparmor_parser"
[ 179.919845] audit: type=1400 audit(1790158591.881:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/27710/usr/lib/snapd/snap-confine" pid=2653 comm="apparmor_parser"
[ 180.033935] audit: type=1400 audit(1790158591.995:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.install" pid=2670 comm="apparmor_parser"
[ 180.034474] audit: type=1400 audit(1790158591.996:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.disconnect-plug-host-hunspell" pid=2669 comm="apparmor_parser"
[ 180.042258] audit: type=1400 audit(1790158592.003:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.post-refresh" pid=2671 comm="apparmor_parser"
[ 180.126661] audit: type=1400 audit(1790158592.088:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.firefox.hook.configure" pid=2668 comm="apparmor_parser"
[ 180.143616] audit: type=1400 audit(1790158592.105:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.desktop-security-center.hook.configure" pid=2665 comm="apparmor_parser"
[ 180.326471] audit: type=1400 audit(1790158592.288:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.hwctl.hook.configure" pid=2676 comm="apparmor_parser"
[ 188.207300] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 1644901525 wd_nsec: 1644890202
[ 188.264519] kauditd_printk_skb: 43 callbacks suppressed
[ 188.264523] audit: type=1400 audit(1790158600.226:55): apparmor="STATUS" operation="profile_load" profile="unconfined" name="rsyslogd" pid=2804 comm="apparmor_parser"
[ 189.114778] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 189.114782] Bluetooth: BNEP filters: protocol multicast
[ 189.114788] Bluetooth: BNEP socket layer initialized
[ 189.116009] Bluetooth: MGMT ver 1.23
[ 189.171604] NET: Registered PF_ALG protocol family
[ 189.478684] nvme nvme0: using unchecked data buffer
[ 189.492305] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 189.492382] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 189.492648] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 189.492661] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 189.502126] block nvme0n1: No UUID available providing old NGUID
[ 189.773141] set_capacity_and_notify: 5 callbacks suppressed
[ 189.773144] loop18: detected capacity change from 0 to 8
[ 189.869667] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 189.930061] audit: type=1400 audit(1790158601.891:56): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=3104 comm="apparmor_parser"
[ 190.085597] audit: type=1400 audit(1790158602.047:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/27710/usr/lib/snapd/snap-confine" pid=3120 comm="apparmor_parser"
[ 190.143006] audit: type=1400 audit(1790158602.104:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.hwctl" pid=3127 comm="apparmor_parser"
[ 190.225210] audit: type=1400 audit(1790158602.186:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.hwctl.hwctl" pid=3129 comm="apparmor_parser"
[ 190.227621] audit: type=1400 audit(1790158602.188:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.hwctl.hook.configure" pid=3128 comm="apparmor_parser"
[ 190.387122] audit: type=1400 audit(1790158602.348:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.hwctl.hwctl-daemon" pid=3130 comm="apparmor_parser"
[ 190.416827] audit: type=1400 audit(1790158602.378:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.prompting-client.hook.configure" pid=3134 comm="apparmor_parser"
[ 190.420254] audit: type=1400 audit(1790158602.381:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.hook.configure" pid=3123 comm="apparmor_parser"
[ 190.430216] audit: type=1400 audit(1790158602.391:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.ubuntu-desktop-bootstrap" pid=3140 comm="apparmor_parser"
[ 193.020419] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 203.167249] kauditd_printk_skb: 45 callbacks suppressed
[ 203.167256] audit: type=1400 audit(1790158615.128:110): apparmor="DENIED" operation="open" class="file" profile="snap.thunderbird.hook.install" name="/var/lib/snapd/hostfs/usr/share/hunspell/" pid=3935 comm="find" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 208.874293] Bluetooth: RFCOMM TTY layer initialized
[ 208.874314] Bluetooth: RFCOMM socket layer initialized
[ 208.874320] Bluetooth: RFCOMM ver 1.11
[ 214.494529] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 214.494565] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 215.211509] rfkill: input handler disabled
[ 219.684260] hid-sensor-hub 0020:1022:0001.000A: Event data for report 1 was too short (15 vs 14)
[ 225.232576] block mmcblk0: the capability attribute has been deprecated.
[ 225.474716] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 225.513623] JFS: nTxBlock = 8192, nTxLock = 65536
[ 225.574524] QNX4 filesystem 0.2.3 registered.
[ 225.693306] Btrfs loaded, zoned=yes, fsverity=yes
[ 237.203010] systemd-journald[1356]: Under memory pressure, flushing caches.
[ 300.030000] ntfs3: Enabled Linux POSIX ACLs support
[ 300.030005] ntfs3: Read-only LZX/Xpress compression included
[-- Attachment #4: ubuntu70-usb4-state-after-lspci.txt --]
[-- Type: text/plain, Size: 75 bytes --]
=== 00:04.1 after lspci ===
active
D0
=== 09:00.0 after lspci ===
present
[-- Attachment #5: ubuntu70-usb4-state-before-lspci.txt --]
[-- Type: text/plain, Size: 96 bytes --]
=== 00:04.1 before lspci ===
auto
active
D0
=== 09:00.0 ===
present
=== 6b:00.6 ===
active
D0
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-23 11:51 ` Freeman Z
@ 2026-09-23 12:26 ` Kovacs, Alexander
2026-09-23 12:35 ` Mario Limonciello
2026-09-23 19:37 ` Kovacs, Alexander
1 sibling, 1 reply; 40+ messages in thread
From: Kovacs, Alexander @ 2026-09-23 12:26 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan
AMD General
Freeman Z,
And this same setup still exhibits the failed behavior with a mainline 7.2 kernel?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Wednesday, September 23, 2026 6:52 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mario, Mika and Alex,
I tested the Kensington SD5000T5 dock again by using Ubuntu 26.04.1 Live with kernel 7.0.0-30-generic and thunderbolt.dyndbg=+p. The dock was disconnected at boot, and I did not run lspci before the hotplug log and power states had been saved.
In this Ubuntu run the PCIe/USB enumeration worked without any workaround:
426.716: USB4 dock connection detected (host port 0:2, link up)
426.753: Kensington SD5000T5 discovered
428.410: PCIe Down path activation complete
428.411: PCIe Up path activation complete
429.025: pcieport 0000:00:04.1 reports Card present / Link Up
429.026: downstream 0000:09:00.0 (8086:5786) enumerated
After the dock had connected, but *before* running lspci, the sysfs states were:
0000:00:04.1 power/control=auto; runtime_status=active; power_state=D0
0000:09:00.0 present
0000:6b:00.6 runtime_status=active; power_state=D0
The downstream USB devices and dock Ethernet also enumerated. I then ran lspci once: 0000:00:04.1 remained active/D0, 0000:09:00.0 remained present. Thus this run cannot show an lspci-triggered wakeup or a resulting PME event: it was already working.
In my previous failing CachyOS runs, invoking lspci could wake 00:04.1 and make 09:00.0 appear. I do not see an explicit PME delivery message at hotplug in the Ubuntu dmesg.
The external display did still flicker. The Ubuntu log includes one DP tunnel DPRX read timeout at ~431.188s, followed by a completed capability read at ~431.239s, I do not know if it's related.
Attached are the full Ubuntu dmesg after/before hotplug and the state files.
Unrelated USB serial numbers and network interface MAC addresses are redacted.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Wednesday, September 23, 2026 4:00
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
> -----Original Message-----
> From: Freeman Z <SHD-ISAC@outlook.com>
> Sent: Tuesday, September 22, 2026 11:41 AM
> To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg
> <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org;
> bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com;
> YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S,
> Sanath <Sanath.S@amd.com>; Natikar, Basavaraj
> <Basavaraj.Natikar@amd.com>; Kovacs, Alexander
> <Alexander.Kovacs@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend
> prevents JHL9480 downstream enumeration
>
> [You don't often get email from shd-isac@outlook.com. Learn why this
> is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
>
>
> Hi Mika, Mario,
>
> I reproduced the failure following the requested sequence on my installed CachyOS system with kernel 7.2.6-1-cachyos and thunderbolt.dyndbg=+p.
>
> For this trace the dock was physically disconnected at boot. I did not run lspci before or during the reproduction.
>
> Before plugging the dock:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> After plugging the Kensington SD5000T5 and waiting about 15 seconds:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:09:00.0
> missing
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = active
> power_state = D0
>
> The Thunderbolt dynamic debug log shows the NHI/control channel waking and the USB4 fabric being configured. In particular:
>
> thunderbolt 0000:6b:00.6: control channel starting...
> thunderbolt 0000:6b:00.6: 0: resuming switch
> thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state:
>2)
> thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
> thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
> thunderbolt 0000:6b:00.6: PCIe Down path activation complete
> thunderbolt 0000:6b:00.6: PCIe Up path activation complete
>
> However, I do not see a PME message corresponding to the dock insertion.
> The PME messages in the full dmesg are the early-boot
> "PME: Signaling with IRQ ..." initialization messages.
>
> So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold to
> D0 and the Thunderbolt driver successfully programs the PCIe tunnel in
> the
> USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1 remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
>
> I attached the full dmesg captured after the dock plug, plus the small before/after state files. I redacted only unrelated local network identifiers, the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device UIDs are otherwise unchanged.
>
> This particular dynamic-debug trace was collected on CachyOS rather than the Arch stock kernel used for my earlier reproduction.
>
It sure sounds like a PME doesn't deliver properly for some reason.
I suppose that while in this state - if you ran lspci the root port at
0000:00:04.1 exits D3cold and 0000:09:00.0 shows up, right?
Does the PME show up in the logs after you've done this?
Any chance you can easily check Ubuntu 26.04.1 live media? There is a
7.0 based kernel there, and I would like to know if this regressed from that.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-23 12:26 ` Kovacs, Alexander
@ 2026-09-23 12:35 ` Mario Limonciello
0 siblings, 0 replies; 40+ messages in thread
From: Mario Limonciello @ 2026-09-23 12:35 UTC (permalink / raw)
To: Kovacs, Alexander, Freeman Z, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan
On 9/23/26 07:26, Kovacs, Alexander wrote:
> AMD General
>
> Freeman Z,
>
> And this same setup still exhibits the failed behavior with a mainline 7.2 kernel?
>
> Replied or Forwarded By:
> Alex Kovacs
> 845-625-4422
> akovacs@amd.com
>
> -----Original Message-----
> From: Freeman Z <SHD-ISAC@outlook.com>
> Sent: Wednesday, September 23, 2026 6:52 AM
> To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
>
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
>
>
> Hi Mario, Mika and Alex,
>
> I tested the Kensington SD5000T5 dock again by using Ubuntu 26.04.1 Live with kernel 7.0.0-30-generic and thunderbolt.dyndbg=+p. The dock was disconnected at boot, and I did not run lspci before the hotplug log and power states had been saved.
>
> In this Ubuntu run the PCIe/USB enumeration worked without any workaround:
>
> 426.716: USB4 dock connection detected (host port 0:2, link up)
> 426.753: Kensington SD5000T5 discovered
> 428.410: PCIe Down path activation complete
> 428.411: PCIe Up path activation complete
> 429.025: pcieport 0000:00:04.1 reports Card present / Link Up
> 429.026: downstream 0000:09:00.0 (8086:5786) enumerated
>
> After the dock had connected, but *before* running lspci, the sysfs states were:
>
> 0000:00:04.1 power/control=auto; runtime_status=active; power_state=D0
> 0000:09:00.0 present
> 0000:6b:00.6 runtime_status=active; power_state=D0
>
> The downstream USB devices and dock Ethernet also enumerated. I then ran lspci once: 0000:00:04.1 remained active/D0, 0000:09:00.0 remained present. Thus this run cannot show an lspci-triggered wakeup or a resulting PME event: it was already working.
> In my previous failing CachyOS runs, invoking lspci could wake 00:04.1 and make 09:00.0 appear. I do not see an explicit PME delivery message at hotplug in the Ubuntu dmesg.
>
> The external display did still flicker. The Ubuntu log includes one DP tunnel DPRX read timeout at ~431.188s, followed by a completed capability read at ~431.239s, I do not know if it's related.
>
> Attached are the full Ubuntu dmesg after/before hotplug and the state files.
> Unrelated USB serial numbers and network interface MAC addresses are redacted.
>
> Thanks,
> Freeman
>
OK, so IMV either:
A) We Have a regression from mainline 7.0 to mainline 7.2.
B) Cachy OS has a patch that is causing the issue.
C) There is a patch Ubuntu's distro kernel that is helping.
I think we need to narrow down which of those is the case.
Can you please check out and build a mainline 7.0 tag on your Cachy and
see if you can reproduce?
If you can't reproduce; check out a mainline 7.2 tag and see if you can.
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-23 11:51 ` Freeman Z
2026-09-23 12:26 ` Kovacs, Alexander
@ 2026-09-23 19:37 ` Kovacs, Alexander
2026-09-24 7:18 ` Freeman Z
1 sibling, 1 reply; 40+ messages in thread
From: Kovacs, Alexander @ 2026-09-23 19:37 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan
AMD General
Also, is the external monitor hooked directly to the system or through the dock?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Wednesday, September 23, 2026 6:52 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mario, Mika and Alex,
I tested the Kensington SD5000T5 dock again by using Ubuntu 26.04.1 Live with kernel 7.0.0-30-generic and thunderbolt.dyndbg=+p. The dock was disconnected at boot, and I did not run lspci before the hotplug log and power states had been saved.
In this Ubuntu run the PCIe/USB enumeration worked without any workaround:
426.716: USB4 dock connection detected (host port 0:2, link up)
426.753: Kensington SD5000T5 discovered
428.410: PCIe Down path activation complete
428.411: PCIe Up path activation complete
429.025: pcieport 0000:00:04.1 reports Card present / Link Up
429.026: downstream 0000:09:00.0 (8086:5786) enumerated
After the dock had connected, but *before* running lspci, the sysfs states were:
0000:00:04.1 power/control=auto; runtime_status=active; power_state=D0
0000:09:00.0 present
0000:6b:00.6 runtime_status=active; power_state=D0
The downstream USB devices and dock Ethernet also enumerated. I then ran lspci once: 0000:00:04.1 remained active/D0, 0000:09:00.0 remained present. Thus this run cannot show an lspci-triggered wakeup or a resulting PME event: it was already working.
In my previous failing CachyOS runs, invoking lspci could wake 00:04.1 and make 09:00.0 appear. I do not see an explicit PME delivery message at hotplug in the Ubuntu dmesg.
The external display did still flicker. The Ubuntu log includes one DP tunnel DPRX read timeout at ~431.188s, followed by a completed capability read at ~431.239s, I do not know if it's related.
Attached are the full Ubuntu dmesg after/before hotplug and the state files.
Unrelated USB serial numbers and network interface MAC addresses are redacted.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Wednesday, September 23, 2026 4:00
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
> -----Original Message-----
> From: Freeman Z <SHD-ISAC@outlook.com>
> Sent: Tuesday, September 22, 2026 11:41 AM
> To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg
> <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org;
> bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com;
> YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S,
> Sanath <Sanath.S@amd.com>; Natikar, Basavaraj
> <Basavaraj.Natikar@amd.com>; Kovacs, Alexander
> <Alexander.Kovacs@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend
> prevents JHL9480 downstream enumeration
>
> [You don't often get email from shd-isac@outlook.com. Learn why this
> is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
>
>
> Hi Mika, Mario,
>
> I reproduced the failure following the requested sequence on my installed CachyOS system with kernel 7.2.6-1-cachyos and thunderbolt.dyndbg=+p.
>
> For this trace the dock was physically disconnected at boot. I did not run lspci before or during the reproduction.
>
> Before plugging the dock:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> After plugging the Kensington SD5000T5 and waiting about 15 seconds:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:09:00.0
> missing
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = active
> power_state = D0
>
> The Thunderbolt dynamic debug log shows the NHI/control channel waking and the USB4 fabric being configured. In particular:
>
> thunderbolt 0000:6b:00.6: control channel starting...
> thunderbolt 0000:6b:00.6: 0: resuming switch
> thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state:
>2)
> thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
> thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
> thunderbolt 0000:6b:00.6: PCIe Down path activation complete
> thunderbolt 0000:6b:00.6: PCIe Up path activation complete
>
> However, I do not see a PME message corresponding to the dock insertion.
> The PME messages in the full dmesg are the early-boot
> "PME: Signaling with IRQ ..." initialization messages.
>
> So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold to
> D0 and the Thunderbolt driver successfully programs the PCIe tunnel in
> the
> USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1 remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
>
> I attached the full dmesg captured after the dock plug, plus the small before/after state files. I redacted only unrelated local network identifiers, the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device UIDs are otherwise unchanged.
>
> This particular dynamic-debug trace was collected on CachyOS rather than the Arch stock kernel used for my earlier reproduction.
>
It sure sounds like a PME doesn't deliver properly for some reason.
I suppose that while in this state - if you ran lspci the root port at
0000:00:04.1 exits D3cold and 0000:09:00.0 shows up, right?
Does the PME show up in the logs after you've done this?
Any chance you can easily check Ubuntu 26.04.1 live media? There is a
7.0 based kernel there, and I would like to know if this regressed from that.
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-23 19:37 ` Kovacs, Alexander
@ 2026-09-24 7:18 ` Freeman Z
2026-09-25 5:27 ` Mika Westerberg
0 siblings, 1 reply; 40+ messages in thread
From: Freeman Z @ 2026-09-24 7:18 UTC (permalink / raw)
To: Kovacs, Alexander, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan
[-- Attachment #1: Type: text/plain, Size: 11182 bytes --]
Hi Alex, Mario and Mika,
Yes. I have now tested self-built vanilla kernel.org Linux 7.0.12
and 7.2.6 on the same machine, with thunderbolt.dyndbg=+p.
The external monitor is connected through the Kensington SD5000T5
dock.
For both vanilla 7.0.12 and 7.2.6, I see the following behavior:
- Cold or warm boot with the dock already attached:
enumeration works normally in my tests.
- Boot/reboot with the dock disconnected, wait until
0000:00:04.1 and 0000:6b:00.6 are runtime-suspended in D3cold,
then hot-plug the dock:
the failure reproduces before running lspci.
In the failing runs on both vanilla kernels:
Before hotplug:
0000:00:04.1
power/control = auto
power/runtime_status = suspended
power_state = D3cold
0000:6b:00.6
power/control = auto
power/runtime_status = suspended
power_state = D3cold
After hotplug, before lspci:
0000:00:04.1
power/control = auto
power/runtime_status = suspended
power_state = D3cold
0000:6b:00.6
power/control = auto
power/runtime_status = active
power_state = D0
0000:09:00.0
missing
Thunderbolt dynamic debug reports both:
PCIe Down path activation complete
PCIe Up path activation complete
Only after running:
lspci >/dev/null
does the root port wake and PCIe hotplug proceed. I then see:
0000:00:04.1
power/runtime_status = active
power_state = D0
pcieport 0000:00:04.1: pciehp: Slot(0-1): Card present
pcieport 0000:00:04.1: pciehp: Slot(0-1): Link Up
0000:09:00.0
present
This does not appear to be a 7.0 -> 7.2 upstream regression:
vanilla 7.0.12 and vanilla 7.2.6 show the same D3cold/hotplug
failure.
The Ubuntu 26.04.1's 7.0-based 7.0.0-30-generic kernel
successfully enumerated the same hotplug in my previous
test, whereas vanilla upstream 7.0.12 does not.
There is one additional difference in my testing:
- Vanilla 7.0.12 / 7.2.6:
dock already attached at boot -> works so far.
- CachyOS 7.2.6:
I have also reproduced the failure with the dock already attached
at boot.
The D3cold hotplug failure is reproducible on vanilla upstream,
while CachyOS may have an additional boot-time difference on top of
that.
Regarding the display, it is connected through the dock. Both vanilla
7.0.12 and 7.2.6 also log DP DPRX read timeout(s), followed by
successful capability reads during dock setup.
I attached a sanitized archive containing the complete
before-hotplug, after-hotplug-before-lspci, and after-lspci dmesg/state
captures for both vanilla kernels.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, 23 September 2026 19:37:13
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Also, is the external monitor hooked directly to the system or through the dock?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Wednesday, September 23, 2026 6:52 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mario, Mika and Alex,
I tested the Kensington SD5000T5 dock again by using Ubuntu 26.04.1 Live with kernel 7.0.0-30-generic and thunderbolt.dyndbg=+p. The dock was disconnected at boot, and I did not run lspci before the hotplug log and power states had been saved.
In this Ubuntu run the PCIe/USB enumeration worked without any workaround:
426.716: USB4 dock connection detected (host port 0:2, link up)
426.753: Kensington SD5000T5 discovered
428.410: PCIe Down path activation complete
428.411: PCIe Up path activation complete
429.025: pcieport 0000:00:04.1 reports Card present / Link Up
429.026: downstream 0000:09:00.0 (8086:5786) enumerated
After the dock had connected, but *before* running lspci, the sysfs states were:
0000:00:04.1 power/control=auto; runtime_status=active; power_state=D0
0000:09:00.0 present
0000:6b:00.6 runtime_status=active; power_state=D0
The downstream USB devices and dock Ethernet also enumerated. I then ran lspci once: 0000:00:04.1 remained active/D0, 0000:09:00.0 remained present. Thus this run cannot show an lspci-triggered wakeup or a resulting PME event: it was already working.
In my previous failing CachyOS runs, invoking lspci could wake 00:04.1 and make 09:00.0 appear. I do not see an explicit PME delivery message at hotplug in the Ubuntu dmesg.
The external display did still flicker. The Ubuntu log includes one DP tunnel DPRX read timeout at ~431.188s, followed by a completed capability read at ~431.239s, I do not know if it's related.
Attached are the full Ubuntu dmesg after/before hotplug and the state files.
Unrelated USB serial numbers and network interface MAC addresses are redacted.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Wednesday, September 23, 2026 4:00
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
> -----Original Message-----
> From: Freeman Z <SHD-ISAC@outlook.com>
> Sent: Tuesday, September 22, 2026 11:41 AM
> To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg
> <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org;
> bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com;
> YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S,
> Sanath <Sanath.S@amd.com>; Natikar, Basavaraj
> <Basavaraj.Natikar@amd.com>; Kovacs, Alexander
> <Alexander.Kovacs@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend
> prevents JHL9480 downstream enumeration
>
> [You don't often get email from shd-isac@outlook.com. Learn why this
> is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
>
>
> Hi Mika, Mario,
>
> I reproduced the failure following the requested sequence on my installed CachyOS system with kernel 7.2.6-1-cachyos and thunderbolt.dyndbg=+p.
>
> For this trace the dock was physically disconnected at boot. I did not run lspci before or during the reproduction.
>
> Before plugging the dock:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> After plugging the Kensington SD5000T5 and waiting about 15 seconds:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:09:00.0
> missing
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = active
> power_state = D0
>
> The Thunderbolt dynamic debug log shows the NHI/control channel waking and the USB4 fabric being configured. In particular:
>
> thunderbolt 0000:6b:00.6: control channel starting...
> thunderbolt 0000:6b:00.6: 0: resuming switch
> thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state:
>2)
> thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
> thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
> thunderbolt 0000:6b:00.6: PCIe Down path activation complete
> thunderbolt 0000:6b:00.6: PCIe Up path activation complete
>
> However, I do not see a PME message corresponding to the dock insertion.
> The PME messages in the full dmesg are the early-boot
> "PME: Signaling with IRQ ..." initialization messages.
>
> So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold to
> D0 and the Thunderbolt driver successfully programs the PCIe tunnel in
> the
> USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1 remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
>
> I attached the full dmesg captured after the dock plug, plus the small before/after state files. I redacted only unrelated local network identifiers, the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device UIDs are otherwise unchanged.
>
> This particular dynamic-debug trace was collected on CachyOS rather than the Arch stock kernel used for my earlier reproduction.
>
It sure sounds like a PME doesn't deliver properly for some reason.
I suppose that while in this state - if you ran lspci the root port at
0000:00:04.1 exits D3cold and 0000:09:00.0 shows up, right?
Does the PME show up in the logs after you've done this?
Any chance you can easily check Ubuntu 26.04.1 live media? There is a
7.0 based kernel there, and I would like to know if this regressed from that.
[-- Attachment #2: usb4-upstream-7.0.12-7.2.6-sanitized.zip --]
[-- Type: application/zip, Size: 182419 bytes --]
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-24 7:18 ` Freeman Z
@ 2026-09-25 5:27 ` Mika Westerberg
2026-09-25 9:38 ` Freeman Z
0 siblings, 1 reply; 40+ messages in thread
From: Mika Westerberg @ 2026-09-25 5:27 UTC (permalink / raw)
To: Freeman Z
Cc: Kovacs, Alexander, Limonciello, Mario, linux-pci@vger.kernel.org,
linux-usb@vger.kernel.org, bhelgaas@google.com,
westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan
Hi,
I wonder if you could try the vanilla mainline kernel (not the stable
trees), this one:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
Take for example v7.3-rc4 and see if the problem happens. If it does, take
say v7.0 or whatever is the closest the stable tree that has it working and
see if that works. If that works then we have the two points needed to
bisect the issue on the mainlne.
On Thu, Sep 24, 2026 at 07:18:30AM +0000, Freeman Z wrote:
> Hi Alex, Mario and Mika,
>
> Yes. I have now tested self-built vanilla kernel.org Linux 7.0.12
> and 7.2.6 on the same machine, with thunderbolt.dyndbg=+p.
>
> The external monitor is connected through the Kensington SD5000T5
> dock.
>
> For both vanilla 7.0.12 and 7.2.6, I see the following behavior:
>
> - Cold or warm boot with the dock already attached:
> enumeration works normally in my tests.
>
> - Boot/reboot with the dock disconnected, wait until
> 0000:00:04.1 and 0000:6b:00.6 are runtime-suspended in D3cold,
> then hot-plug the dock:
> the failure reproduces before running lspci.
>
> In the failing runs on both vanilla kernels:
>
> Before hotplug:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> After hotplug, before lspci:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = active
> power_state = D0
>
> 0000:09:00.0
> missing
>
> Thunderbolt dynamic debug reports both:
>
> PCIe Down path activation complete
> PCIe Up path activation complete
>
> Only after running:
>
> lspci >/dev/null
>
> does the root port wake and PCIe hotplug proceed. I then see:
>
> 0000:00:04.1
> power/runtime_status = active
> power_state = D0
>
> pcieport 0000:00:04.1: pciehp: Slot(0-1): Card present
> pcieport 0000:00:04.1: pciehp: Slot(0-1): Link Up
>
> 0000:09:00.0
> present
>
> This does not appear to be a 7.0 -> 7.2 upstream regression:
> vanilla 7.0.12 and vanilla 7.2.6 show the same D3cold/hotplug
> failure.
>
> The Ubuntu 26.04.1's 7.0-based 7.0.0-30-generic kernel
> successfully enumerated the same hotplug in my previous
> test, whereas vanilla upstream 7.0.12 does not.
>
> There is one additional difference in my testing:
>
> - Vanilla 7.0.12 / 7.2.6:
> dock already attached at boot -> works so far.
>
> - CachyOS 7.2.6:
> I have also reproduced the failure with the dock already attached
> at boot.
>
> The D3cold hotplug failure is reproducible on vanilla upstream,
> while CachyOS may have an additional boot-time difference on top of
> that.
>
> Regarding the display, it is connected through the dock. Both vanilla
> 7.0.12 and 7.2.6 also log DP DPRX read timeout(s), followed by
> successful capability reads during dock setup.
>
> I attached a sanitized archive containing the complete
> before-hotplug, after-hotplug-before-lspci, and after-lspci dmesg/state
> captures for both vanilla kernels.
>
> Thanks,
> Freeman
> ________________________________________
> From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
> Sent: Wednesday, 23 September 2026 19:37:13
> To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
> Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
>
> AMD General
>
> Also, is the external monitor hooked directly to the system or through the dock?
>
> Replied or Forwarded By:
> Alex Kovacs
> 845-625-4422
> akovacs@amd.com
>
> -----Original Message-----
> From: Freeman Z <SHD-ISAC@outlook.com>
> Sent: Wednesday, September 23, 2026 6:52 AM
> To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
>
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
>
>
> Hi Mario, Mika and Alex,
>
> I tested the Kensington SD5000T5 dock again by using Ubuntu 26.04.1 Live with kernel 7.0.0-30-generic and thunderbolt.dyndbg=+p. The dock was disconnected at boot, and I did not run lspci before the hotplug log and power states had been saved.
>
> In this Ubuntu run the PCIe/USB enumeration worked without any workaround:
>
> 426.716: USB4 dock connection detected (host port 0:2, link up)
> 426.753: Kensington SD5000T5 discovered
> 428.410: PCIe Down path activation complete
> 428.411: PCIe Up path activation complete
> 429.025: pcieport 0000:00:04.1 reports Card present / Link Up
> 429.026: downstream 0000:09:00.0 (8086:5786) enumerated
>
> After the dock had connected, but *before* running lspci, the sysfs states were:
>
> 0000:00:04.1 power/control=auto; runtime_status=active; power_state=D0
> 0000:09:00.0 present
> 0000:6b:00.6 runtime_status=active; power_state=D0
>
> The downstream USB devices and dock Ethernet also enumerated. I then ran lspci once: 0000:00:04.1 remained active/D0, 0000:09:00.0 remained present. Thus this run cannot show an lspci-triggered wakeup or a resulting PME event: it was already working.
> In my previous failing CachyOS runs, invoking lspci could wake 00:04.1 and make 09:00.0 appear. I do not see an explicit PME delivery message at hotplug in the Ubuntu dmesg.
>
> The external display did still flicker. The Ubuntu log includes one DP tunnel DPRX read timeout at ~431.188s, followed by a completed capability read at ~431.239s, I do not know if it's related.
>
> Attached are the full Ubuntu dmesg after/before hotplug and the state files.
> Unrelated USB serial numbers and network interface MAC addresses are redacted.
>
> Thanks,
> Freeman
>
> ________________________________________
> From: Mario Limonciello <mario.limonciello@amd.com>
> Sent: Wednesday, September 23, 2026 4:00
> To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
>
> > -----Original Message-----
> > From: Freeman Z <SHD-ISAC@outlook.com>
> > Sent: Tuesday, September 22, 2026 11:41 AM
> > To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg
> > <mika.westerberg@linux.intel.com>
> > Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org;
> > bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com;
> > YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S,
> > Sanath <Sanath.S@amd.com>; Natikar, Basavaraj
> > <Basavaraj.Natikar@amd.com>; Kovacs, Alexander
> > <Alexander.Kovacs@amd.com>
> > Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend
> > prevents JHL9480 downstream enumeration
> >
> > [You don't often get email from shd-isac@outlook.com. Learn why this
> > is important at https://aka.ms/LearnAboutSenderIdentification ]
> >
> > Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
> >
> >
> > Hi Mika, Mario,
> >
> > I reproduced the failure following the requested sequence on my installed CachyOS system with kernel 7.2.6-1-cachyos and thunderbolt.dyndbg=+p.
> >
> > For this trace the dock was physically disconnected at boot. I did not run lspci before or during the reproduction.
> >
> > Before plugging the dock:
> >
> > 0000:00:04.1
> > power/control = auto
> > power/runtime_status = suspended
> > power_state = D3cold
> >
> > 0000:6b:00.6
> > power/control = auto
> > power/runtime_status = suspended
> > power_state = D3cold
> >
> > After plugging the Kensington SD5000T5 and waiting about 15 seconds:
> >
> > 0000:00:04.1
> > power/control = auto
> > power/runtime_status = suspended
> > power_state = D3cold
> >
> > 0000:09:00.0
> > missing
> >
> > 0000:6b:00.6
> > power/control = auto
> > power/runtime_status = active
> > power_state = D0
> >
> > The Thunderbolt dynamic debug log shows the NHI/control channel waking and the USB4 fabric being configured. In particular:
> >
> > thunderbolt 0000:6b:00.6: control channel starting...
> > thunderbolt 0000:6b:00.6: 0: resuming switch
> > thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state:
> >2)
> > thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
> > thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
> > thunderbolt 0000:6b:00.6: PCIe Down path activation complete
> > thunderbolt 0000:6b:00.6: PCIe Up path activation complete
> >
> > However, I do not see a PME message corresponding to the dock insertion.
> > The PME messages in the full dmesg are the early-boot
> > "PME: Signaling with IRQ ..." initialization messages.
> >
> > So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold to
> > D0 and the Thunderbolt driver successfully programs the PCIe tunnel in
> > the
> > USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1 remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
> >
> > I attached the full dmesg captured after the dock plug, plus the small before/after state files. I redacted only unrelated local network identifiers, the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device UIDs are otherwise unchanged.
> >
> > This particular dynamic-debug trace was collected on CachyOS rather than the Arch stock kernel used for my earlier reproduction.
> >
> It sure sounds like a PME doesn't deliver properly for some reason.
>
> I suppose that while in this state - if you ran lspci the root port at
> 0000:00:04.1 exits D3cold and 0000:09:00.0 shows up, right?
>
> Does the PME show up in the logs after you've done this?
>
> Any chance you can easily check Ubuntu 26.04.1 live media? There is a
> 7.0 based kernel there, and I would like to know if this regressed from that.
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-25 5:27 ` Mika Westerberg
@ 2026-09-25 9:38 ` Freeman Z
2026-09-25 11:31 ` Freeman Z
0 siblings, 1 reply; 40+ messages in thread
From: Freeman Z @ 2026-09-25 9:38 UTC (permalink / raw)
To: Mika Westerberg
Cc: Kovacs, Alexander, Limonciello, Mario, linux-pci@vger.kernel.org,
linux-usb@vger.kernel.org, bhelgaas@google.com,
westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan
Hi Mika, Alex and Mario,
I tested both requested points from Linus' mainline tree using the same
reproduction procedure.
v7.3.0-rc4: bad
v7.0.0: bad
For both tests, the dock was disconnected at boot. I hot-plugged
the dock without running lspci after boot.
In both cases, after hotplug:
0000:00:04.1 remained suspended / D3cold
0000:6b:00.6 resumed to active / D0
0000:09:00.0 was missing
Thanks,
Freeman
________________________________________
From: Mika Westerberg <mika.westerberg@linux.intel.com>
Sent: Friday, 25 September 2026 05:27:27
To: Freeman Z <SHD-ISAC@outlook.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Hi,
I wonder if you could try the vanilla mainline kernel (not the stable
trees), this one:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
Take for example v7.3-rc4 and see if the problem happens. If it does, take
say v7.0 or whatever is the closest the stable tree that has it working and
see if that works. If that works then we have the two points needed to
bisect the issue on the mainlne.
On Thu, Sep 24, 2026 at 07:18:30AM +0000, Freeman Z wrote:
> Hi Alex, Mario and Mika,
>
> Yes. I have now tested self-built vanilla kernel.org Linux 7.0.12
> and 7.2.6 on the same machine, with thunderbolt.dyndbg=+p.
>
> The external monitor is connected through the Kensington SD5000T5
> dock.
>
> For both vanilla 7.0.12 and 7.2.6, I see the following behavior:
>
> - Cold or warm boot with the dock already attached:
> enumeration works normally in my tests.
>
> - Boot/reboot with the dock disconnected, wait until
> 0000:00:04.1 and 0000:6b:00.6 are runtime-suspended in D3cold,
> then hot-plug the dock:
> the failure reproduces before running lspci.
>
> In the failing runs on both vanilla kernels:
>
> Before hotplug:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> After hotplug, before lspci:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = active
> power_state = D0
>
> 0000:09:00.0
> missing
>
> Thunderbolt dynamic debug reports both:
>
> PCIe Down path activation complete
> PCIe Up path activation complete
>
> Only after running:
>
> lspci >/dev/null
>
> does the root port wake and PCIe hotplug proceed. I then see:
>
> 0000:00:04.1
> power/runtime_status = active
> power_state = D0
>
> pcieport 0000:00:04.1: pciehp: Slot(0-1): Card present
> pcieport 0000:00:04.1: pciehp: Slot(0-1): Link Up
>
> 0000:09:00.0
> present
>
> This does not appear to be a 7.0 -> 7.2 upstream regression:
> vanilla 7.0.12 and vanilla 7.2.6 show the same D3cold/hotplug
> failure.
>
> The Ubuntu 26.04.1's 7.0-based 7.0.0-30-generic kernel
> successfully enumerated the same hotplug in my previous
> test, whereas vanilla upstream 7.0.12 does not.
>
> There is one additional difference in my testing:
>
> - Vanilla 7.0.12 / 7.2.6:
> dock already attached at boot -> works so far.
>
> - CachyOS 7.2.6:
> I have also reproduced the failure with the dock already attached
> at boot.
>
> The D3cold hotplug failure is reproducible on vanilla upstream,
> while CachyOS may have an additional boot-time difference on top of
> that.
>
> Regarding the display, it is connected through the dock. Both vanilla
> 7.0.12 and 7.2.6 also log DP DPRX read timeout(s), followed by
> successful capability reads during dock setup.
>
> I attached a sanitized archive containing the complete
> before-hotplug, after-hotplug-before-lspci, and after-lspci dmesg/state
> captures for both vanilla kernels.
>
> Thanks,
> Freeman
> ________________________________________
> From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
> Sent: Wednesday, 23 September 2026 19:37:13
> To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
> Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
>
> AMD General
>
> Also, is the external monitor hooked directly to the system or through the dock?
>
> Replied or Forwarded By:
> Alex Kovacs
> 845-625-4422
> akovacs@amd.com
>
> -----Original Message-----
> From: Freeman Z <SHD-ISAC@outlook.com>
> Sent: Wednesday, September 23, 2026 6:52 AM
> To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
>
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
>
>
> Hi Mario, Mika and Alex,
>
> I tested the Kensington SD5000T5 dock again by using Ubuntu 26.04.1 Live with kernel 7.0.0-30-generic and thunderbolt.dyndbg=+p. The dock was disconnected at boot, and I did not run lspci before the hotplug log and power states had been saved.
>
> In this Ubuntu run the PCIe/USB enumeration worked without any workaround:
>
> 426.716: USB4 dock connection detected (host port 0:2, link up)
> 426.753: Kensington SD5000T5 discovered
> 428.410: PCIe Down path activation complete
> 428.411: PCIe Up path activation complete
> 429.025: pcieport 0000:00:04.1 reports Card present / Link Up
> 429.026: downstream 0000:09:00.0 (8086:5786) enumerated
>
> After the dock had connected, but *before* running lspci, the sysfs states were:
>
> 0000:00:04.1 power/control=auto; runtime_status=active; power_state=D0
> 0000:09:00.0 present
> 0000:6b:00.6 runtime_status=active; power_state=D0
>
> The downstream USB devices and dock Ethernet also enumerated. I then ran lspci once: 0000:00:04.1 remained active/D0, 0000:09:00.0 remained present. Thus this run cannot show an lspci-triggered wakeup or a resulting PME event: it was already working.
> In my previous failing CachyOS runs, invoking lspci could wake 00:04.1 and make 09:00.0 appear. I do not see an explicit PME delivery message at hotplug in the Ubuntu dmesg.
>
> The external display did still flicker. The Ubuntu log includes one DP tunnel DPRX read timeout at ~431.188s, followed by a completed capability read at ~431.239s, I do not know if it's related.
>
> Attached are the full Ubuntu dmesg after/before hotplug and the state files.
> Unrelated USB serial numbers and network interface MAC addresses are redacted.
>
> Thanks,
> Freeman
>
> ________________________________________
> From: Mario Limonciello <mario.limonciello@amd.com>
> Sent: Wednesday, September 23, 2026 4:00
> To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
>
> > -----Original Message-----
> > From: Freeman Z <SHD-ISAC@outlook.com>
> > Sent: Tuesday, September 22, 2026 11:41 AM
> > To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg
> > <mika.westerberg@linux.intel.com>
> > Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org;
> > bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com;
> > YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S,
> > Sanath <Sanath.S@amd.com>; Natikar, Basavaraj
> > <Basavaraj.Natikar@amd.com>; Kovacs, Alexander
> > <Alexander.Kovacs@amd.com>
> > Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend
> > prevents JHL9480 downstream enumeration
> >
> > [You don't often get email from shd-isac@outlook.com. Learn why this
> > is important at https://aka.ms/LearnAboutSenderIdentification ]
> >
> > Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
> >
> >
> > Hi Mika, Mario,
> >
> > I reproduced the failure following the requested sequence on my installed CachyOS system with kernel 7.2.6-1-cachyos and thunderbolt.dyndbg=+p.
> >
> > For this trace the dock was physically disconnected at boot. I did not run lspci before or during the reproduction.
> >
> > Before plugging the dock:
> >
> > 0000:00:04.1
> > power/control = auto
> > power/runtime_status = suspended
> > power_state = D3cold
> >
> > 0000:6b:00.6
> > power/control = auto
> > power/runtime_status = suspended
> > power_state = D3cold
> >
> > After plugging the Kensington SD5000T5 and waiting about 15 seconds:
> >
> > 0000:00:04.1
> > power/control = auto
> > power/runtime_status = suspended
> > power_state = D3cold
> >
> > 0000:09:00.0
> > missing
> >
> > 0000:6b:00.6
> > power/control = auto
> > power/runtime_status = active
> > power_state = D0
> >
> > The Thunderbolt dynamic debug log shows the NHI/control channel waking and the USB4 fabric being configured. In particular:
> >
> > thunderbolt 0000:6b:00.6: control channel starting...
> > thunderbolt 0000:6b:00.6: 0: resuming switch
> > thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state:
> >2)
> > thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
> > thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
> > thunderbolt 0000:6b:00.6: PCIe Down path activation complete
> > thunderbolt 0000:6b:00.6: PCIe Up path activation complete
> >
> > However, I do not see a PME message corresponding to the dock insertion.
> > The PME messages in the full dmesg are the early-boot
> > "PME: Signaling with IRQ ..." initialization messages.
> >
> > So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold to
> > D0 and the Thunderbolt driver successfully programs the PCIe tunnel in
> > the
> > USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1 remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
> >
> > I attached the full dmesg captured after the dock plug, plus the small before/after state files. I redacted only unrelated local network identifiers, the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device UIDs are otherwise unchanged.
> >
> > This particular dynamic-debug trace was collected on CachyOS rather than the Arch stock kernel used for my earlier reproduction.
> >
> It sure sounds like a PME doesn't deliver properly for some reason.
>
> I suppose that while in this state - if you ran lspci the root port at
> 0000:00:04.1 exits D3cold and 0000:09:00.0 shows up, right?
>
> Does the PME show up in the logs after you've done this?
>
> Any chance you can easily check Ubuntu 26.04.1 live media? There is a
> 7.0 based kernel there, and I would like to know if this regressed from that.
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-25 9:38 ` Freeman Z
@ 2026-09-25 11:31 ` Freeman Z
2026-09-25 11:50 ` Mika Westerberg
2026-09-25 14:03 ` Kovacs, Alexander
0 siblings, 2 replies; 40+ messages in thread
From: Freeman Z @ 2026-09-25 11:31 UTC (permalink / raw)
To: Mika Westerberg
Cc: Kovacs, Alexander, Limonciello, Mario, linux-pci@vger.kernel.org,
linux-usb@vger.kernel.org, bhelgaas@google.com,
westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan
Hi Mika, Alex and Mario,
I tested v7.3-rc4 with the following Ubuntu SAUCE patch from
Chia-Lin Kao (AceLan) at Canonical:
thunderbolt: Fix PCIe device enumeration with delayed rescan
Ubuntu SRU posting:
https://lists.ubuntu.com/archives/kernel-team/2026-April/166926.html
Launchpad:
https://bugs.launchpad.net/bugs/2139572
The Ubuntu posting says this was cherry-picked from the corresponding
upstream submission:
https://lore.kernel.org/lkml/20260121060857.237777-1-acelan.kao@canonical.com/T/#u
The patch schedules a delayed pci_rescan_bus() 300 ms after the
Thunderbolt PCIe tunnel has been activated, to recover devices that
pciehp did not enumerate.
The patch as posted was written against an older Thunderbolt NHI API
and refers to:
tb->nhi->pdev
In v7.3-rc4, struct tb_nhi instead contains struct device *dev.
I therefore made only the API adaptation needed to build the same
logic on v7.3-rc4:
if (tb->nhi && tb->nhi->dev && dev_is_pci(tb->nhi->dev)) {
struct pci_dev *pdev = to_pci_dev(tb->nhi->dev);
struct pci_bus *bus = pdev->bus;
The delayed-rescan behavior itself is otherwise unchanged, including
the 300 ms delay and pci_rescan_bus() call.
With this patched v7.3-rc4 kernel, the same hotplug test succeeds.
I did not run lspci before checking the result.
So the current A/B result, using the same v7.3-rc4 base and test
procedure, is:
Linus v7.3-rc4
-> hotplug fails
Linus v7.3-rc4 + the above Ubuntu delayed-rescan patch
(with only the v7.3 NHI API adaptation described above)
-> hotplug succeeds
This may also explain why the Ubuntu 26.04.1 7.0-based kernel worked
in my earlier test while both Linus v7.0 and stable 7.0.12 fail.
The delayed rescan may simply recover enumeration after the PCIe
tunnel has been established even though the normal pciehp/wake
path did not complete as expected.
I can collect a full dynamic-debug/state trace from the patched
v7.3-rc4 kernel as well if that would be useful.
Thanks,
Freeman
________________________________________
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Friday, 25 September 2026 09:38:26
To: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Hi Mika, Alex and Mario,
I tested both requested points from Linus' mainline tree using the same
reproduction procedure.
v7.3.0-rc4: bad
v7.0.0: bad
For both tests, the dock was disconnected at boot. I hot-plugged
the dock without running lspci after boot.
In both cases, after hotplug:
0000:00:04.1 remained suspended / D3cold
0000:6b:00.6 resumed to active / D0
0000:09:00.0 was missing
Thanks,
Freeman
________________________________________
From: Mika Westerberg <mika.westerberg@linux.intel.com>
Sent: Friday, 25 September 2026 05:27:27
To: Freeman Z <SHD-ISAC@outlook.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Hi,
I wonder if you could try the vanilla mainline kernel (not the stable
trees), this one:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
Take for example v7.3-rc4 and see if the problem happens. If it does, take
say v7.0 or whatever is the closest the stable tree that has it working and
see if that works. If that works then we have the two points needed to
bisect the issue on the mainlne.
On Thu, Sep 24, 2026 at 07:18:30AM +0000, Freeman Z wrote:
> Hi Alex, Mario and Mika,
>
> Yes. I have now tested self-built vanilla kernel.org Linux 7.0.12
> and 7.2.6 on the same machine, with thunderbolt.dyndbg=+p.
>
> The external monitor is connected through the Kensington SD5000T5
> dock.
>
> For both vanilla 7.0.12 and 7.2.6, I see the following behavior:
>
> - Cold or warm boot with the dock already attached:
> enumeration works normally in my tests.
>
> - Boot/reboot with the dock disconnected, wait until
> 0000:00:04.1 and 0000:6b:00.6 are runtime-suspended in D3cold,
> then hot-plug the dock:
> the failure reproduces before running lspci.
>
> In the failing runs on both vanilla kernels:
>
> Before hotplug:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> After hotplug, before lspci:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = active
> power_state = D0
>
> 0000:09:00.0
> missing
>
> Thunderbolt dynamic debug reports both:
>
> PCIe Down path activation complete
> PCIe Up path activation complete
>
> Only after running:
>
> lspci >/dev/null
>
> does the root port wake and PCIe hotplug proceed. I then see:
>
> 0000:00:04.1
> power/runtime_status = active
> power_state = D0
>
> pcieport 0000:00:04.1: pciehp: Slot(0-1): Card present
> pcieport 0000:00:04.1: pciehp: Slot(0-1): Link Up
>
> 0000:09:00.0
> present
>
> This does not appear to be a 7.0 -> 7.2 upstream regression:
> vanilla 7.0.12 and vanilla 7.2.6 show the same D3cold/hotplug
> failure.
>
> The Ubuntu 26.04.1's 7.0-based 7.0.0-30-generic kernel
> successfully enumerated the same hotplug in my previous
> test, whereas vanilla upstream 7.0.12 does not.
>
> There is one additional difference in my testing:
>
> - Vanilla 7.0.12 / 7.2.6:
> dock already attached at boot -> works so far.
>
> - CachyOS 7.2.6:
> I have also reproduced the failure with the dock already attached
> at boot.
>
> The D3cold hotplug failure is reproducible on vanilla upstream,
> while CachyOS may have an additional boot-time difference on top of
> that.
>
> Regarding the display, it is connected through the dock. Both vanilla
> 7.0.12 and 7.2.6 also log DP DPRX read timeout(s), followed by
> successful capability reads during dock setup.
>
> I attached a sanitized archive containing the complete
> before-hotplug, after-hotplug-before-lspci, and after-lspci dmesg/state
> captures for both vanilla kernels.
>
> Thanks,
> Freeman
> ________________________________________
> From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
> Sent: Wednesday, 23 September 2026 19:37:13
> To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
> Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
>
> AMD General
>
> Also, is the external monitor hooked directly to the system or through the dock?
>
> Replied or Forwarded By:
> Alex Kovacs
> 845-625-4422
> akovacs@amd.com
>
> -----Original Message-----
> From: Freeman Z <SHD-ISAC@outlook.com>
> Sent: Wednesday, September 23, 2026 6:52 AM
> To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
>
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
>
>
> Hi Mario, Mika and Alex,
>
> I tested the Kensington SD5000T5 dock again by using Ubuntu 26.04.1 Live with kernel 7.0.0-30-generic and thunderbolt.dyndbg=+p. The dock was disconnected at boot, and I did not run lspci before the hotplug log and power states had been saved.
>
> In this Ubuntu run the PCIe/USB enumeration worked without any workaround:
>
> 426.716: USB4 dock connection detected (host port 0:2, link up)
> 426.753: Kensington SD5000T5 discovered
> 428.410: PCIe Down path activation complete
> 428.411: PCIe Up path activation complete
> 429.025: pcieport 0000:00:04.1 reports Card present / Link Up
> 429.026: downstream 0000:09:00.0 (8086:5786) enumerated
>
> After the dock had connected, but *before* running lspci, the sysfs states were:
>
> 0000:00:04.1 power/control=auto; runtime_status=active; power_state=D0
> 0000:09:00.0 present
> 0000:6b:00.6 runtime_status=active; power_state=D0
>
> The downstream USB devices and dock Ethernet also enumerated. I then ran lspci once: 0000:00:04.1 remained active/D0, 0000:09:00.0 remained present. Thus this run cannot show an lspci-triggered wakeup or a resulting PME event: it was already working.
> In my previous failing CachyOS runs, invoking lspci could wake 00:04.1 and make 09:00.0 appear. I do not see an explicit PME delivery message at hotplug in the Ubuntu dmesg.
>
> The external display did still flicker. The Ubuntu log includes one DP tunnel DPRX read timeout at ~431.188s, followed by a completed capability read at ~431.239s, I do not know if it's related.
>
> Attached are the full Ubuntu dmesg after/before hotplug and the state files.
> Unrelated USB serial numbers and network interface MAC addresses are redacted.
>
> Thanks,
> Freeman
>
> ________________________________________
> From: Mario Limonciello <mario.limonciello@amd.com>
> Sent: Wednesday, September 23, 2026 4:00
> To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
>
> > -----Original Message-----
> > From: Freeman Z <SHD-ISAC@outlook.com>
> > Sent: Tuesday, September 22, 2026 11:41 AM
> > To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg
> > <mika.westerberg@linux.intel.com>
> > Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org;
> > bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com;
> > YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S,
> > Sanath <Sanath.S@amd.com>; Natikar, Basavaraj
> > <Basavaraj.Natikar@amd.com>; Kovacs, Alexander
> > <Alexander.Kovacs@amd.com>
> > Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend
> > prevents JHL9480 downstream enumeration
> >
> > [You don't often get email from shd-isac@outlook.com. Learn why this
> > is important at https://aka.ms/LearnAboutSenderIdentification ]
> >
> > Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
> >
> >
> > Hi Mika, Mario,
> >
> > I reproduced the failure following the requested sequence on my installed CachyOS system with kernel 7.2.6-1-cachyos and thunderbolt.dyndbg=+p.
> >
> > For this trace the dock was physically disconnected at boot. I did not run lspci before or during the reproduction.
> >
> > Before plugging the dock:
> >
> > 0000:00:04.1
> > power/control = auto
> > power/runtime_status = suspended
> > power_state = D3cold
> >
> > 0000:6b:00.6
> > power/control = auto
> > power/runtime_status = suspended
> > power_state = D3cold
> >
> > After plugging the Kensington SD5000T5 and waiting about 15 seconds:
> >
> > 0000:00:04.1
> > power/control = auto
> > power/runtime_status = suspended
> > power_state = D3cold
> >
> > 0000:09:00.0
> > missing
> >
> > 0000:6b:00.6
> > power/control = auto
> > power/runtime_status = active
> > power_state = D0
> >
> > The Thunderbolt dynamic debug log shows the NHI/control channel waking and the USB4 fabric being configured. In particular:
> >
> > thunderbolt 0000:6b:00.6: control channel starting...
> > thunderbolt 0000:6b:00.6: 0: resuming switch
> > thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state:
> >2)
> > thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
> > thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
> > thunderbolt 0000:6b:00.6: PCIe Down path activation complete
> > thunderbolt 0000:6b:00.6: PCIe Up path activation complete
> >
> > However, I do not see a PME message corresponding to the dock insertion.
> > The PME messages in the full dmesg are the early-boot
> > "PME: Signaling with IRQ ..." initialization messages.
> >
> > So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold to
> > D0 and the Thunderbolt driver successfully programs the PCIe tunnel in
> > the
> > USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1 remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
> >
> > I attached the full dmesg captured after the dock plug, plus the small before/after state files. I redacted only unrelated local network identifiers, the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device UIDs are otherwise unchanged.
> >
> > This particular dynamic-debug trace was collected on CachyOS rather than the Arch stock kernel used for my earlier reproduction.
> >
> It sure sounds like a PME doesn't deliver properly for some reason.
>
> I suppose that while in this state - if you ran lspci the root port at
> 0000:00:04.1 exits D3cold and 0000:09:00.0 shows up, right?
>
> Does the PME show up in the logs after you've done this?
>
> Any chance you can easily check Ubuntu 26.04.1 live media? There is a
> 7.0 based kernel there, and I would like to know if this regressed from that.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-25 11:31 ` Freeman Z
@ 2026-09-25 11:50 ` Mika Westerberg
2026-09-25 14:10 ` Mario Limonciello
2026-09-25 14:03 ` Kovacs, Alexander
1 sibling, 1 reply; 40+ messages in thread
From: Mika Westerberg @ 2026-09-25 11:50 UTC (permalink / raw)
To: Freeman Z
Cc: Kovacs, Alexander, Limonciello, Mario, linux-pci@vger.kernel.org,
linux-usb@vger.kernel.org, bhelgaas@google.com,
westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan
Hi,
On Fri, Sep 25, 2026 at 11:31:55AM +0000, Freeman Z wrote:
> Hi Mika, Alex and Mario,
>
> I tested v7.3-rc4 with the following Ubuntu SAUCE patch from
> Chia-Lin Kao (AceLan) at Canonical:
>
> thunderbolt: Fix PCIe device enumeration with delayed rescan
>
> Ubuntu SRU posting:
> https://lists.ubuntu.com/archives/kernel-team/2026-April/166926.html
>
> Launchpad:
> https://bugs.launchpad.net/bugs/2139572
>
> The Ubuntu posting says this was cherry-picked from the corresponding
> upstream submission:
>
> https://lore.kernel.org/lkml/20260121060857.237777-1-acelan.kao@canonical.com/T/#u
>
> The patch schedules a delayed pci_rescan_bus() 300 ms after the
> Thunderbolt PCIe tunnel has been activated, to recover devices that
> pciehp did not enumerate.
Oh I remember that. It's a horrible hack that is never going to applied.
Based on this we now know why it "works" in Ubuntu. Thanks for finding it.
I think the real issue is that the PME is not propagated as it should,
either missing wake or something else but that's what the AMD folks can
hopefully help us to figure out.
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-25 11:31 ` Freeman Z
2026-09-25 11:50 ` Mika Westerberg
@ 2026-09-25 14:03 ` Kovacs, Alexander
1 sibling, 0 replies; 40+ messages in thread
From: Kovacs, Alexander @ 2026-09-25 14:03 UTC (permalink / raw)
To: Freeman Z, Mika Westerberg
Cc: Limonciello, Mario, linux-pci@vger.kernel.org,
linux-usb@vger.kernel.org, bhelgaas@google.com,
westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan
AMD General
Freeman, et al.,
So far, I have been unable to repro this on 2 of our customer reference boards. I am using Ubuntu 26.04 and I have tried 7.0.0 and 7.2.2 generic kernels and 7.3-rc1 mainline kernel. Also, I have back leveled the BIOS AGESA to what is reported in Freeman's logs. I am using a TB 5 (Startech brand) dock with a generic monitor plugged into the HDMI port and an OWC TB 4 hub plugged into a TB (usb-c) port on the dock. I have tried plugging into the computer management and a different port on the dock with the OWC hub.
If I boot without the dock and wait until I see the PCI Bridge "suspended" the dock and hub are both enumerated.
If I boot with the dock, both it and the hub are enumerated correctly.
If I then unplug the dock and wait for the PCI Bridge to suspend, then re-plug, both the dock and hub are enumerated correctly.
Any suggestions to help replicate.
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Friday, September 25, 2026 6:32 AM
To: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mika, Alex and Mario,
I tested v7.3-rc4 with the following Ubuntu SAUCE patch from Chia-Lin Kao (AceLan) at Canonical:
thunderbolt: Fix PCIe device enumeration with delayed rescan
Ubuntu SRU posting:
https://lists.ubuntu.com/archives/kernel-team/2026-April/166926.html
Launchpad:
https://bugs.launchpad.net/bugs/2139572
The Ubuntu posting says this was cherry-picked from the corresponding upstream submission:
https://lore.kernel.org/lkml/20260121060857.237777-1-acelan.kao@canonical.com/T/#u
The patch schedules a delayed pci_rescan_bus() 300 ms after the Thunderbolt PCIe tunnel has been activated, to recover devices that pciehp did not enumerate.
The patch as posted was written against an older Thunderbolt NHI API and refers to:
tb->nhi->pdev
In v7.3-rc4, struct tb_nhi instead contains struct device *dev.
I therefore made only the API adaptation needed to build the same logic on v7.3-rc4:
if (tb->nhi && tb->nhi->dev && dev_is_pci(tb->nhi->dev)) {
struct pci_dev *pdev = to_pci_dev(tb->nhi->dev);
struct pci_bus *bus = pdev->bus;
The delayed-rescan behavior itself is otherwise unchanged, including the 300 ms delay and pci_rescan_bus() call.
With this patched v7.3-rc4 kernel, the same hotplug test succeeds.
I did not run lspci before checking the result.
So the current A/B result, using the same v7.3-rc4 base and test procedure, is:
Linus v7.3-rc4
-> hotplug fails
Linus v7.3-rc4 + the above Ubuntu delayed-rescan patch
(with only the v7.3 NHI API adaptation described above)
-> hotplug succeeds
This may also explain why the Ubuntu 26.04.1 7.0-based kernel worked in my earlier test while both Linus v7.0 and stable 7.0.12 fail.
The delayed rescan may simply recover enumeration after the PCIe tunnel has been established even though the normal pciehp/wake path did not complete as expected.
I can collect a full dynamic-debug/state trace from the patched
v7.3-rc4 kernel as well if that would be useful.
Thanks,
Freeman
________________________________________
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Friday, 25 September 2026 09:38:26
To: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Hi Mika, Alex and Mario,
I tested both requested points from Linus' mainline tree using the same reproduction procedure.
v7.3.0-rc4: bad
v7.0.0: bad
For both tests, the dock was disconnected at boot. I hot-plugged the dock without running lspci after boot.
In both cases, after hotplug:
0000:00:04.1 remained suspended / D3cold
0000:6b:00.6 resumed to active / D0
0000:09:00.0 was missing
Thanks,
Freeman
________________________________________
From: Mika Westerberg <mika.westerberg@linux.intel.com>
Sent: Friday, 25 September 2026 05:27:27
To: Freeman Z <SHD-ISAC@outlook.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Hi,
I wonder if you could try the vanilla mainline kernel (not the stable trees), this one:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
Take for example v7.3-rc4 and see if the problem happens. If it does, take say v7.0 or whatever is the closest the stable tree that has it working and see if that works. If that works then we have the two points needed to bisect the issue on the mainlne.
On Thu, Sep 24, 2026 at 07:18:30AM +0000, Freeman Z wrote:
> Hi Alex, Mario and Mika,
>
> Yes. I have now tested self-built vanilla kernel.org Linux 7.0.12 and
> 7.2.6 on the same machine, with thunderbolt.dyndbg=+p.
>
> The external monitor is connected through the Kensington SD5000T5
> dock.
>
> For both vanilla 7.0.12 and 7.2.6, I see the following behavior:
>
> - Cold or warm boot with the dock already attached:
> enumeration works normally in my tests.
>
> - Boot/reboot with the dock disconnected, wait until
> 0000:00:04.1 and 0000:6b:00.6 are runtime-suspended in D3cold,
> then hot-plug the dock:
> the failure reproduces before running lspci.
>
> In the failing runs on both vanilla kernels:
>
> Before hotplug:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> After hotplug, before lspci:
>
> 0000:00:04.1
> power/control = auto
> power/runtime_status = suspended
> power_state = D3cold
>
> 0000:6b:00.6
> power/control = auto
> power/runtime_status = active
> power_state = D0
>
> 0000:09:00.0
> missing
>
> Thunderbolt dynamic debug reports both:
>
> PCIe Down path activation complete
> PCIe Up path activation complete
>
> Only after running:
>
> lspci >/dev/null
>
> does the root port wake and PCIe hotplug proceed. I then see:
>
> 0000:00:04.1
> power/runtime_status = active
> power_state = D0
>
> pcieport 0000:00:04.1: pciehp: Slot(0-1): Card present
> pcieport 0000:00:04.1: pciehp: Slot(0-1): Link Up
>
> 0000:09:00.0
> present
>
> This does not appear to be a 7.0 -> 7.2 upstream regression:
> vanilla 7.0.12 and vanilla 7.2.6 show the same D3cold/hotplug failure.
>
> The Ubuntu 26.04.1's 7.0-based 7.0.0-30-generic kernel successfully
> enumerated the same hotplug in my previous test, whereas vanilla
> upstream 7.0.12 does not.
>
> There is one additional difference in my testing:
>
> - Vanilla 7.0.12 / 7.2.6:
> dock already attached at boot -> works so far.
>
> - CachyOS 7.2.6:
> I have also reproduced the failure with the dock already attached
> at boot.
>
> The D3cold hotplug failure is reproducible on vanilla upstream, while
> CachyOS may have an additional boot-time difference on top of that.
>
> Regarding the display, it is connected through the dock. Both vanilla
> 7.0.12 and 7.2.6 also log DP DPRX read timeout(s), followed by
> successful capability reads during dock setup.
>
> I attached a sanitized archive containing the complete before-hotplug,
> after-hotplug-before-lspci, and after-lspci dmesg/state captures for
> both vanilla kernels.
>
> Thanks,
> Freeman
> ________________________________________
> From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
> Sent: Wednesday, 23 September 2026 19:37:13
> To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario
> <Mario.Limonciello@amd.com>; Mika Westerberg
> <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>;
> linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>;
> bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org
> <westeri@kernel.org>; andreas.noever@gmail.com
> <andreas.noever@gmail.com>; YehezkelShB@gmail.com
> <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>;
> linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath
> <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>;
> Martinez, Juan <Juan.Martinez@amd.com>
> Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend
> prevents JHL9480 downstream enumeration
>
> AMD General
>
> Also, is the external monitor hooked directly to the system or through the dock?
>
> Replied or Forwarded By:
> Alex Kovacs
> 845-625-4422
> akovacs@amd.com
>
> -----Original Message-----
> From: Freeman Z <SHD-ISAC@outlook.com>
> Sent: Wednesday, September 23, 2026 6:52 AM
> To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander
> <Alexander.Kovacs@amd.com>; Mika Westerberg
> <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org;
> bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com;
> YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S,
> Sanath <Sanath.S@amd.com>; Natikar, Basavaraj
> <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend
> prevents JHL9480 downstream enumeration
>
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
>
>
> Hi Mario, Mika and Alex,
>
> I tested the Kensington SD5000T5 dock again by using Ubuntu 26.04.1 Live with kernel 7.0.0-30-generic and thunderbolt.dyndbg=+p. The dock was disconnected at boot, and I did not run lspci before the hotplug log and power states had been saved.
>
> In this Ubuntu run the PCIe/USB enumeration worked without any workaround:
>
> 426.716: USB4 dock connection detected (host port 0:2, link up)
> 426.753: Kensington SD5000T5 discovered
> 428.410: PCIe Down path activation complete
> 428.411: PCIe Up path activation complete
> 429.025: pcieport 0000:00:04.1 reports Card present / Link Up
> 429.026: downstream 0000:09:00.0 (8086:5786) enumerated
>
> After the dock had connected, but *before* running lspci, the sysfs states were:
>
> 0000:00:04.1 power/control=auto; runtime_status=active;
> power_state=D0
> 0000:09:00.0 present
> 0000:6b:00.6 runtime_status=active; power_state=D0
>
> The downstream USB devices and dock Ethernet also enumerated. I then ran lspci once: 0000:00:04.1 remained active/D0, 0000:09:00.0 remained present. Thus this run cannot show an lspci-triggered wakeup or a resulting PME event: it was already working.
> In my previous failing CachyOS runs, invoking lspci could wake 00:04.1 and make 09:00.0 appear. I do not see an explicit PME delivery message at hotplug in the Ubuntu dmesg.
>
> The external display did still flicker. The Ubuntu log includes one DP tunnel DPRX read timeout at ~431.188s, followed by a completed capability read at ~431.239s, I do not know if it's related.
>
> Attached are the full Ubuntu dmesg after/before hotplug and the state files.
> Unrelated USB serial numbers and network interface MAC addresses are redacted.
>
> Thanks,
> Freeman
>
> ________________________________________
> From: Mario Limonciello <mario.limonciello@amd.com>
> Sent: Wednesday, September 23, 2026 4:00
> To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z
> <SHD-ISAC@outlook.com>; Mika Westerberg
> <mika.westerberg@linux.intel.com>
> Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>;
> linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>;
> bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org
> <westeri@kernel.org>; andreas.noever@gmail.com
> <andreas.noever@gmail.com>; YehezkelShB@gmail.com
> <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>;
> linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath
> <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>;
> Martinez, Juan <Juan.Martinez@amd.com>
> Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend
> prevents JHL9480 downstream enumeration
>
> > -----Original Message-----
> > From: Freeman Z <SHD-ISAC@outlook.com>
> > Sent: Tuesday, September 22, 2026 11:41 AM
> > To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg
> > <mika.westerberg@linux.intel.com>
> > Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org;
> > bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com;
> > YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org;
> > S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj
> > <Basavaraj.Natikar@amd.com>; Kovacs, Alexander
> > <Alexander.Kovacs@amd.com>
> > Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend
> > prevents JHL9480 downstream enumeration
> >
> > [You don't often get email from shd-isac@outlook.com. Learn why this
> > is important at https://aka.ms/LearnAboutSenderIdentification ]
> >
> > Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
> >
> >
> > Hi Mika, Mario,
> >
> > I reproduced the failure following the requested sequence on my installed CachyOS system with kernel 7.2.6-1-cachyos and thunderbolt.dyndbg=+p.
> >
> > For this trace the dock was physically disconnected at boot. I did not run lspci before or during the reproduction.
> >
> > Before plugging the dock:
> >
> > 0000:00:04.1
> > power/control = auto
> > power/runtime_status = suspended
> > power_state = D3cold
> >
> > 0000:6b:00.6
> > power/control = auto
> > power/runtime_status = suspended
> > power_state = D3cold
> >
> > After plugging the Kensington SD5000T5 and waiting about 15 seconds:
> >
> > 0000:00:04.1
> > power/control = auto
> > power/runtime_status = suspended
> > power_state = D3cold
> >
> > 0000:09:00.0
> > missing
> >
> > 0000:6b:00.6
> > power/control = auto
> > power/runtime_status = active
> > power_state = D0
> >
> > The Thunderbolt dynamic debug log shows the NHI/control channel waking and the USB4 fabric being configured. In particular:
> >
> > thunderbolt 0000:6b:00.6: control channel starting...
> > thunderbolt 0000:6b:00.6: 0: resuming switch
> > thunderbolt 0000:6b:00.6: 0:2: is connected, link is up (state:
> >2)
> > thunderbolt 0-2: Kensington SD5000T5 EQ Thunderbolt 5 Dock
> > thunderbolt 0000:6b:00.6: 0:5 <-> 2:9 (PCI): activating
> > thunderbolt 0000:6b:00.6: PCIe Down path activation complete
> > thunderbolt 0000:6b:00.6: PCIe Up path activation complete
> >
> > However, I do not see a PME message corresponding to the dock insertion.
> > The PME messages in the full dmesg are the early-boot
> > "PME: Signaling with IRQ ..." initialization messages.
> >
> > So in this reproduction, the NHI at 0000:6b:00.6 wakes from D3cold
> > to
> > D0 and the Thunderbolt driver successfully programs the PCIe tunnel
> > in the
> > USB4 fabric, but the AMD 1022:14ef PCIe root port/tunnel at 0000:00:04.1 remains in D3cold and the downstream 0000:09:00.0 hierarchy never appears.
> >
> > I attached the full dmesg captured after the dock plug, plus the small before/after state files. I redacted only unrelated local network identifiers, the hostname, and filesystem/LUKS UUIDs; the Thunderbolt debug data and device UIDs are otherwise unchanged.
> >
> > This particular dynamic-debug trace was collected on CachyOS rather than the Arch stock kernel used for my earlier reproduction.
> >
> It sure sounds like a PME doesn't deliver properly for some reason.
>
> I suppose that while in this state - if you ran lspci the root port at
> 0000:00:04.1 exits D3cold and 0000:09:00.0 shows up, right?
>
> Does the PME show up in the logs after you've done this?
>
> Any chance you can easily check Ubuntu 26.04.1 live media? There is a
> 7.0 based kernel there, and I would like to know if this regressed from that.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-25 11:50 ` Mika Westerberg
@ 2026-09-25 14:10 ` Mario Limonciello
2026-09-25 15:12 ` Freeman Z
0 siblings, 1 reply; 40+ messages in thread
From: Mario Limonciello @ 2026-09-25 14:10 UTC (permalink / raw)
To: Mika Westerberg, Freeman Z
Cc: Kovacs, Alexander, linux-pci@vger.kernel.org,
linux-usb@vger.kernel.org, bhelgaas@google.com,
westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
On 9/25/26 06:50, Mika Westerberg wrote:
> Hi,
>
> On Fri, Sep 25, 2026 at 11:31:55AM +0000, Freeman Z wrote:
>> Hi Mika, Alex and Mario,
>>
>> I tested v7.3-rc4 with the following Ubuntu SAUCE patch from
>> Chia-Lin Kao (AceLan) at Canonical:
>>
>> thunderbolt: Fix PCIe device enumeration with delayed rescan
>>
>> Ubuntu SRU posting:
>> https://lists.ubuntu.com/archives/kernel-team/2026-April/166926.html
>>
>> Launchpad:
>> https://bugs.launchpad.net/bugs/2139572
>>
>> The Ubuntu posting says this was cherry-picked from the corresponding
>> upstream submission:
>>
>> https://lore.kernel.org/lkml/20260121060857.237777-1-acelan.kao@canonical.com/T/#u
>>
>> The patch schedules a delayed pci_rescan_bus() 300 ms after the
>> Thunderbolt PCIe tunnel has been activated, to recover devices that
>> pciehp did not enumerate.
>
> Oh I remember that. It's a horrible hack that is never going to applied.
>
> Based on this we now know why it "works" in Ubuntu. Thanks for finding it.
Yeah; great finding, this certainly explains the difference.
>
> I think the real issue is that the PME is not propagated as it should,
> either missing wake or something else but that's what the AMD folks can
> hopefully help us to figure out.
My guess is that there is a race condition of some sort happening.
If we can come up with a repro on our side we can dig further into it.
Alex already tried to downgrade a reference board to match the AGESA
version in your BIOS, but that wasn't enough.
Can you please share your specific kconfig that you're using? Maybe
aligning that can help.
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-25 14:10 ` Mario Limonciello
@ 2026-09-25 15:12 ` Freeman Z
2026-09-25 15:24 ` Mario Limonciello
0 siblings, 1 reply; 40+ messages in thread
From: Freeman Z @ 2026-09-25 15:12 UTC (permalink / raw)
To: Mario Limonciello, Mika Westerberg
Cc: Kovacs, Alexander, linux-pci@vger.kernel.org,
linux-usb@vger.kernel.org, bhelgaas@google.com,
westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
[-- Attachment #1: Type: text/plain, Size: 3189 bytes --]
Hi Mario, Alex and Mika,
Sure. Attached is the exact .config used for my unmodified Linus v7.3-rc4 test
that reproduces the failure.
SHA256:
488899cc5a0b5f2de69466df2639e39769d40d90682f51690400399a549309c2
This is the final .config used after make olddefconfig for the v7.3-rc4 test.
The v7.3-rc4 delayed-rescan test that succeeded used the same configuration base.
The patched kernel was distinguished with a different LOCALVERSION.
Please let me know if there are any other platform or configuration details that
would help align the reference-board setup.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Friday, 25 September 2026 14:10:34
To: Mika Westerberg <mika.westerberg@linux.intel.com>; Freeman Z <SHD-ISAC@outlook.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 9/25/26 06:50, Mika Westerberg wrote:
> Hi,
>
> On Fri, Sep 25, 2026 at 11:31:55AM +0000, Freeman Z wrote:
>> Hi Mika, Alex and Mario,
>>
>> I tested v7.3-rc4 with the following Ubuntu SAUCE patch from
>> Chia-Lin Kao (AceLan) at Canonical:
>>
>> thunderbolt: Fix PCIe device enumeration with delayed rescan
>>
>> Ubuntu SRU posting:
>> https://lists.ubuntu.com/archives/kernel-team/2026-April/166926.html
>>
>> Launchpad:
>> https://bugs.launchpad.net/bugs/2139572
>>
>> The Ubuntu posting says this was cherry-picked from the corresponding
>> upstream submission:
>>
>> https://lore.kernel.org/lkml/20260121060857.237777-1-acelan.kao@canonical.com/T/#u
>>
>> The patch schedules a delayed pci_rescan_bus() 300 ms after the
>> Thunderbolt PCIe tunnel has been activated, to recover devices that
>> pciehp did not enumerate.
>
> Oh I remember that. It's a horrible hack that is never going to applied.
>
> Based on this we now know why it "works" in Ubuntu. Thanks for finding it.
Yeah; great finding, this certainly explains the difference.
>
> I think the real issue is that the PME is not propagated as it should,
> either missing wake or something else but that's what the AMD folks can
> hopefully help us to figure out.
My guess is that there is a race condition of some sort happening.
If we can come up with a repro on our side we can dig further into it.
Alex already tried to downgrade a reference board to match the AGESA
version in your BIOS, but that wasn't enough.
Can you please share your specific kconfig that you're using? Maybe
aligning that can help.
[-- Attachment #2: config-v7.3-rc4-flow-x13-bad --]
[-- Type: text/plain, Size: 294904 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 7.3.0-rc4 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (GCC) 16.2.1 20260810"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=160201
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=24700
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=24700
CONFIG_LLD_VERSION=0
CONFIG_RUSTC_VERSION=0
CONFIG_RUSTC_LLVM_VERSION=0
CONFIG_RUSTC_LLVM_MAJOR_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_ASSUME=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_CC_HAS_COUNTED_BY=y
CONFIG_CC_HAS_COUNTED_BY_PTR=y
CONFIG_CC_HAS_MULTIDIMENSIONAL_NONSTRING=y
CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY=y
CONFIG_PAHOLE_VERSION=132
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION="-usb4-mainline73rc4"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_KERNEL_ZSTD=y
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="cachyos"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_GENERIC_IRQ_STAT_SNAPSHOT=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_ARCH_WANTS_CLOCKSOURCE_READ_INLINE=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST_IDLE=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CLOCKEVENTS_COUPLED=y
CONFIG_GENERIC_CLOCKEVENTS_COUPLED_INLINE=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HRTIMER_REARM_DEFERRED=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING_USER=y
# CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_POSIX_AUX_CLOCKS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
CONFIG_BPF_LSM=y
# end of BPF subsystem
CONFIG_PREEMPT_BUILD=y
CONFIG_ARCH_HAS_PREEMPT_LAZY=y
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_LAZY is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_HAS_SEPARATE_PREEMPT_RESCHED_BITS=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_DYNAMIC=y
CONFIG_SCHED_CORE=y
CONFIG_SCHED_CLASS_EXT=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_TREE_SRCU=y
# CONFIG_FORCE_NEED_SRCU_NMI_SAFE is not set
CONFIG_TASKS_RCU_GENERIC=y
# CONFIG_FORCE_TASKS_RCU is not set
CONFIG_NEED_TASKS_RCU=y
CONFIG_TASKS_RCU=y
# CONFIG_FORCE_TASKS_RUDE_RCU is not set
CONFIG_TASKS_RUDE_RCU=y
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
CONFIG_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU_NO_MB=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_DELAY=500
# CONFIG_RCU_EXP_KTHREAD is not set
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
# CONFIG_RCU_NOCB_CPU_CB_BOOST is not set
CONFIG_RCU_LAZY=y
CONFIG_RCU_LAZY_DEFAULT_OFF=y
CONFIG_RCU_DOUBLE_CHECK_CB_TIME=y
# end of RCU Subsystem
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=m
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_INDEX=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
CONFIG_UCLAMP_TASK=y
CONFIG_UCLAMP_BUCKETS_COUNT=5
# end of Scheduler features
CONFIG_ARCH_HAS_PTE_PROTNONE=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_CC_MS_EXTENSIONS="-fms-extensions"
CONFIG_GCC10_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_GCC_NO_STRINGOP_OVERFLOW=y
CONFIG_CC_NO_STRINGOP_OVERFLOW=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_SCHED_CACHE=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_SLAB_OBJ_EXT=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
# CONFIG_MEMCG_V1 is not set
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_GROUP_SCHED_WEIGHT=y
CONFIG_GROUP_SCHED_BANDWIDTH=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_EXT_GROUP_SCHED=y
CONFIG_EXT_SUB_SCHED=y
CONFIG_SCHED_MM_CID=y
CONFIG_UCLAMP_TASK_GROUP=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_DMEM=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
# CONFIG_CPUSETS_V1 is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_TIME_NS_VDSO=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
# CONFIG_BOOT_CONFIG_FORCE is not set
# CONFIG_BOOT_CONFIG_EMBED is not set
CONFIG_ARCH_SUPPORTS_CMDLINE_FROM_BOOTCONFIG=y
CONFIG_CMDLINE_LOG_WRAP_IDEAL_LEN=1021
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_FUTEX_PRIVATE_HASH=y
CONFIG_FUTEX_MPOL=y
CONFIG_HAVE_FUTEX_ROBUST_UNLOCK=y
CONFIG_FUTEX_ROBUST_UNLOCK=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
CONFIG_RSEQ_SLICE_EXTENSION=y
CONFIG_CACHESTAT_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
CONFIG_PERF_GUEST_MEDIATED_PMU=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
#
# Kexec and crash features
#
CONFIG_CRASH_RESERVE=y
CONFIG_VMCORE_INFO=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_SIG=y
# CONFIG_KEXEC_SIG_FORCE is not set
CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_KEXEC_JUMP=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_DM_CRYPT=y
CONFIG_CRASH_DM_CRYPT_CONFIGS=y
CONFIG_CRASH_HOTPLUG=y
CONFIG_CRASH_MAX_MEMORY_RANGES=8192
# end of Kexec and crash features
#
# Live Update and Kexec HandOver
#
CONFIG_KEXEC_HANDOVER=y
# CONFIG_KEXEC_HANDOVER_DEBUG is not set
CONFIG_KEXEC_HANDOVER_DEBUGFS=y
# CONFIG_KEXEC_HANDOVER_ENABLE_DEFAULT is not set
CONFIG_LIVEUPDATE=y
CONFIG_LIVEUPDATE_MEMFD=y
# end of Live Update and Kexec HandOver
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5
#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
CONFIG_AMD_SECURE_AVIC=y
CONFIG_X86_POSTED_MSI=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_FRED=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_XXL=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_512GB=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_PV_DOM0=y
CONFIG_XEN_PVHVM_GUEST=y
CONFIG_XEN_PVH=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PV_MSR_SAFE=y
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
CONFIG_PVH=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_JAILHOUSE_GUEST=y
CONFIG_ACRN_GUEST=y
CONFIG_BHYVE_GUEST=y
CONFIG_INTEL_TDX_GUEST=y
CONFIG_CC_HAS_MARCH_NATIVE=y
# CONFIG_X86_NATIVE_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_HAVE_PAE=y
CONFIG_X86_CX8=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_BROADCAST_TLB_FLUSH=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_BOOT_VESA_SUPPORT=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_ACPI_MADT_WAKEUP=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
CONFIG_PERF_EVENTS_AMD_POWER=m
CONFIG_PERF_EVENTS_AMD_UNCORE=m
CONFIG_PERF_EVENTS_AMD_BRS=y
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_LATE_LOADING is not set
# CONFIG_MICROCODE_DBG is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_X86_MEM_ENCRYPT=y
CONFIG_AMD_MEM_ENCRYPT=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=0
CONFIG_X86_PAT=y
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
CONFIG_X86_CET=y
CONFIG_X86_KERNEL_IBT=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_ARCH_PKEY_BITS=4
# CONFIG_X86_INTEL_TSX_MODE_OFF is not set
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
CONFIG_X86_INTEL_TSX_MODE_AUTO=y
CONFIG_X86_SGX=y
CONFIG_X86_USER_SHADOW_STACK=y
CONFIG_INTEL_TDX_HOST=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_HANDOVER_PROTOCOL=y
CONFIG_EFI_MIXED=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SUPPORTS_KEXEC=y
CONFIG_ARCH_SUPPORTS_KEXEC_FILE=y
CONFIG_ARCH_SELECTS_KEXEC_FILE=y
CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY=y
CONFIG_ARCH_SUPPORTS_KEXEC_SIG=y
CONFIG_ARCH_SUPPORTS_KEXEC_SIG_FORCE=y
CONFIG_ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_ARCH_SUPPORTS_KEXEC_JUMP=y
CONFIG_ARCH_SUPPORTS_KEXEC_HANDOVER=y
CONFIG_ARCH_SUPPORTS_CRASH_DUMP=y
CONFIG_ARCH_DEFAULT_CRASH_DUMP=y
CONFIG_ARCH_SUPPORTS_CRASH_HOTPLUG=y
CONFIG_ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_HAVE_KLP_BUILD=y
CONFIG_X86_BUS_LOCK_DETECT=y
# end of Processor type and features
CONFIG_CC_HAS_NAMED_AS=y
CONFIG_CC_HAS_NAMED_AS_FIXED_SANITIZERS=y
CONFIG_USE_X86_SEG_SUPPORT=y
CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_CC_HAS_ENTRY_PADDING=y
CONFIG_FUNCTION_PADDING_CFI=11
CONFIG_FUNCTION_PADDING_BYTES=16
CONFIG_CALL_PADDING=y
CONFIG_HAVE_CALL_THUNKS=y
CONFIG_CALL_THUNKS=y
CONFIG_CPU_MITIGATIONS=y
CONFIG_MITIGATION_PAGE_TABLE_ISOLATION=y
CONFIG_MITIGATION_RETPOLINE=y
CONFIG_MITIGATION_RETHUNK=y
CONFIG_MITIGATION_UNRET_ENTRY=y
CONFIG_MITIGATION_CALL_DEPTH_TRACKING=y
# CONFIG_CALL_THUNKS_DEBUG is not set
CONFIG_MITIGATION_IBPB_ENTRY=y
CONFIG_MITIGATION_IBRS_ENTRY=y
CONFIG_MITIGATION_SRSO=y
CONFIG_MITIGATION_SLS=y
CONFIG_MITIGATION_GDS=y
CONFIG_MITIGATION_RFDS=y
CONFIG_MITIGATION_SPECTRE_BHI=y
CONFIG_MITIGATION_MDS=y
CONFIG_MITIGATION_TAA=y
CONFIG_MITIGATION_MMIO_STALE_DATA=y
CONFIG_MITIGATION_L1TF=y
CONFIG_MITIGATION_RETBLEED=y
CONFIG_MITIGATION_SPECTRE_V1=y
CONFIG_MITIGATION_SPECTRE_V2=y
CONFIG_MITIGATION_SRBDS=y
CONFIG_MITIGATION_SSB=y
CONFIG_MITIGATION_ITS=y
CONFIG_MITIGATION_TSA=y
CONFIG_MITIGATION_VMSCAPE=y
CONFIG_ARCH_HAS_ADD_PAGES=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_HIBERNATION_COMP_LZO=y
# CONFIG_HIBERNATION_COMP_LZ4 is not set
CONFIG_HIBERNATION_DEF_COMP="lzo"
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_QOS_CPU_SYSTEM_WAKEUP=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_TABLE_LIB=y
CONFIG_ACPI_THERMAL_LIB=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_FPDT=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_PLATFORM_PROFILE=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_NHLT=y
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_HMAT=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_EINJ_CXL=y
# CONFIG_ACPI_APEI_GHES_NVIDIA is not set
CONFIG_ACPI_APEI_ERST_DEBUG=m
CONFIG_ACPI_DPTF=y
CONFIG_DPTF_POWER=m
CONFIG_DPTF_PCH_FIVR=m
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
CONFIG_ACPI_CONFIGFS=m
CONFIG_ACPI_PFRUT=m
CONFIG_ACPI_PCC=y
CONFIG_ACPI_FFH=y
CONFIG_ACPI_MRRM=y
CONFIG_PMIC_OPREGION=y
CONFIG_BYTCRC_PMIC_OPREGION=y
CONFIG_CHTCRC_PMIC_OPREGION=y
CONFIG_XPOWER_PMIC_OPREGION=y
CONFIG_BXT_WC_PMIC_OPREGION=y
CONFIG_CHT_WC_PMIC_OPREGION=y
CONFIG_CHT_DC_TI_PMIC_OPREGION=y
CONFIG_TPS68470_PMIC_OPREGION=y
CONFIG_ACPI_VIOT=y
CONFIG_ACPI_PRMT=y
CONFIG_X86_PM_TIMER=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_AMD_PSTATE=y
CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
# CONFIG_X86_AMD_PSTATE_UT is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPUFREQ_ARCH_CUR_FREQ=y
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
CONFIG_CPU_IDLE_GOV_HALTPOLL=y
CONFIG_HALTPOLL_CPUIDLE=m
# end of CPU Idle
CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_AMD_NODE=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_EMULATION_DEFAULT_DISABLED is not set
# CONFIG_X86_X32_ABI is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations
CONFIG_KVM_COMMON=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_DIRTY_RING_TSO=y
CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_READONLY_MEM=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_GENERIC_PRE_FAULT_MEMORY=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=m
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_VIRT_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_KVM_GENERIC_HARDWARE_ENABLING=y
CONFIG_KVM_ELIDE_TLB_FLUSH_IF_YOUNG=y
CONFIG_KVM_MMU_LOCKLESS_AGING=y
CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES=y
CONFIG_KVM_GUEST_MEMFD=y
CONFIG_HAVE_KVM_ARCH_GMEM_CONVERT=y
CONFIG_HAVE_KVM_ARCH_GMEM_RECLAIM=y
CONFIG_HAVE_KVM_ARCH_GMEM_INVALIDATE=y
CONFIG_HAVE_KVM_ARCH_GMEM_POPULATE=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM_X86=m
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_X86_SGX_KVM=y
CONFIG_KVM_INTEL_TDX=y
CONFIG_KVM_AMD=m
CONFIG_KVM_AMD_SEV=y
CONFIG_KVM_IOAPIC=y
CONFIG_KVM_SMM=y
CONFIG_KVM_HYPERV=y
CONFIG_KVM_XEN=y
CONFIG_KVM_EXTERNAL_WRITE_TRACKING=y
CONFIG_KVM_MAX_NR_VCPUS=1024
CONFIG_X86_REQUIRED_FEATURE_ALWAYS=y
CONFIG_X86_REQUIRED_FEATURE_NOPL=y
CONFIG_X86_REQUIRED_FEATURE_CX8=y
CONFIG_X86_REQUIRED_FEATURE_CMOV=y
CONFIG_X86_REQUIRED_FEATURE_CPUID=y
CONFIG_X86_REQUIRED_FEATURE_FPU=y
CONFIG_X86_REQUIRED_FEATURE_PAE=y
CONFIG_X86_REQUIRED_FEATURE_MSR=y
CONFIG_X86_REQUIRED_FEATURE_FXSR=y
CONFIG_X86_REQUIRED_FEATURE_XMM=y
CONFIG_X86_REQUIRED_FEATURE_XMM2=y
CONFIG_X86_REQUIRED_FEATURE_LM=y
CONFIG_X86_DISABLED_FEATURE_VME=y
CONFIG_X86_DISABLED_FEATURE_K6_MTRR=y
CONFIG_X86_DISABLED_FEATURE_CYRIX_ARR=y
CONFIG_X86_DISABLED_FEATURE_CENTAUR_MCR=y
CONFIG_X86_DISABLED_FEATURE_LAM=y
CONFIG_AS_WRUSS=y
CONFIG_ARCH_CONFIGURES_CPU_MITIGATIONS=y
CONFIG_ARCH_HAS_DMA_OPS=y
#
# General architecture-dependent options
#
CONFIG_HOTPLUG_SMT=y
CONFIG_ARCH_SUPPORTS_SCHED_SMT=y
CONFIG_ARCH_SUPPORTS_SCHED_CLUSTER=y
CONFIG_ARCH_SUPPORTS_SCHED_MC=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_MC=y
CONFIG_HOTPLUG_CORE_SYNC=y
CONFIG_HOTPLUG_CORE_SYNC_DEAD=y
CONFIG_HOTPLUG_CORE_SYNC_FULL=y
CONFIG_HOTPLUG_SPLIT_STARTUP=y
CONFIG_HOTPLUG_PARALLEL=y
CONFIG_GENERIC_IRQ_ENTRY=y
CONFIG_GENERIC_SYSCALL=y
CONFIG_GENERIC_ENTRY=y
CONFIG_ARCH_SUPPORTS_SYSCALL_USER_DISPATCH=y
CONFIG_SYSCALL_USER_DISPATCH=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_KRETPROBE_ON_RETHOOK=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_ARCH_HAS_CPU_FINALIZE_INIT=y
CONFIG_ARCH_HAS_DELAY_TIMER=y
CONFIG_ARCH_HAS_CPU_PASID=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_ARCH_MEMORY_ORDER_TSO=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_RUST=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_UNWIND_USER=y
CONFIG_HAVE_UNWIND_USER_FP=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_HAVE_EXTRA_ELF_NOTES=y
CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_KSTACK_ERASE=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_PV_STEAL_CLOCK_GEN=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_PMD_MKWRITE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_EXECMEM_ROX=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_PAGE_SHIFT=12
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_SUPPORTS_RT=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_CPU_RESCTRL=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_HAS_CC_PLATFORM=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
CONFIG_HAVE_ARCH_NODE_DEV_GROUP=y
CONFIG_ARCH_HAS_HW_PTE_YOUNG=y
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
CONFIG_ARCH_HAS_KERNEL_FPU_SUPPORT=y
CONFIG_ARCH_VMLINUX_NEEDS_RELOCS=y
CONFIG_HAVE_GENERIC_TIF_BITS=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT_16B=y
CONFIG_FUNCTION_ALIGNMENT=16
CONFIG_CC_HAS_MIN_FUNCTION_ALIGNMENT=y
CONFIG_CC_HAS_SANE_FUNCTION_ALIGNMENT=y
CONFIG_ARCH_HAS_CPU_ATTACK_VECTORS=y
CONFIG_HAVE_ARCH_GET_SECUREBOOT=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_DEBUGFS=y
# CONFIG_MODULE_DEBUG is not set
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
CONFIG_MODULE_SIG_SHA512=y
# CONFIG_MODULE_SIG_SHA3_256 is not set
# CONFIG_MODULE_SIG_SHA3_384 is not set
# CONFIG_MODULE_SIG_SHA3_512 is not set
CONFIG_MODULE_SIG_HASH="sha512"
CONFIG_MODULE_COMPRESS=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
CONFIG_MODULE_COMPRESS_ZSTD=y
CONFIG_MODULE_COMPRESS_ALL=y
CONFIG_MODULE_DECOMPRESS=y
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_CGROUP_PUNT_BIO=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_WRITE_MOUNTED=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_BLK_CGROUP_FC_APPID=y
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_CGROUP_IOPRIO=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
# CONFIG_BLK_ERROR_INJECTION is not set
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
# CONFIG_QUEUED_SPINLOCKS_TRACE_CONTENDED_RELEASE is not set
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
# CONFIG_BINFMT_MISC_BPF is not set
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
CONFIG_ZSWAP_SHRINKER_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD=y
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="zstd"
CONFIG_ZSMALLOC=y
#
# Zsmalloc allocator options
#
#
# Zsmalloc is a common backend allocator for zswap & zram
#
CONFIG_ZSMALLOC_STAT=y
CONFIG_ZSMALLOC_CHAIN_SIZE=8
# end of Zsmalloc allocator options
#
# Slab allocator options
#
CONFIG_SLUB=y
CONFIG_KVFREE_RCU_BATCHED=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLAB_BUCKETS=y
# CONFIG_SLUB_STATS is not set
# CONFIG_KMALLOC_PARTITION_CACHES is not set
# end of Slab allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPARSEMEM_VMEMMAP_PREINIT=y
CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=y
CONFIG_ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP=y
CONFIG_ARCH_WANT_HUGETLB_VMEMMAP_PREINIT=y
CONFIG_HAVE_GUP_FAST=y
CONFIG_MEMBLOCK_KHO_SCRATCH=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_MHP_DEFAULT_ONLINE_TYPE_OFFLINE is not set
CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_AUTO=y
# CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_KERNEL is not set
# CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_MOVABLE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_SPLIT_PTE_PTLOCKS=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_SPLIT_PMD_PTLOCKS=y
CONFIG_BALLOON=y
CONFIG_BALLOON_MIGRATION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_NUMA_MIGRATION=y
CONFIG_MIGRATION=y
CONFIG_DEVICE_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_HAS_PMD_SOFTLEAVES=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PCP_BATCH_SCALE_MAX=5
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_PERSISTENT_HUGE_ZERO_FOLIO=y
CONFIG_MM_ID=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_TRANSPARENT_HUGEPAGE_NEVER is not set
# CONFIG_TRANSPARENT_HUGEPAGE_SHMEM_HUGE_NEVER is not set
# CONFIG_TRANSPARENT_HUGEPAGE_SHMEM_HUGE_ALWAYS is not set
# CONFIG_TRANSPARENT_HUGEPAGE_SHMEM_HUGE_WITHIN_SIZE is not set
CONFIG_TRANSPARENT_HUGEPAGE_SHMEM_HUGE_ADVISE=y
# CONFIG_TRANSPARENT_HUGEPAGE_TMPFS_HUGE_NEVER is not set
# CONFIG_TRANSPARENT_HUGEPAGE_TMPFS_HUGE_ALWAYS is not set
# CONFIG_TRANSPARENT_HUGEPAGE_TMPFS_HUGE_WITHIN_SIZE is not set
CONFIG_TRANSPARENT_HUGEPAGE_TMPFS_HUGE_ADVISE=y
CONFIG_THP_SWAP=y
# CONFIG_NO_PAGE_MAPCOUNT is not set
CONFIG_PAGE_MAPCOUNT=y
CONFIG_PGTABLE_HAS_HUGE_LEAVES=y
CONFIG_HAVE_GIGANTIC_FOLIOS=y
CONFIG_ASYNC_KERNEL_PGTABLE_FREE=y
CONFIG_ARCH_SUPPORTS_HUGE_PFNMAP=y
CONFIG_ARCH_SUPPORTS_PMD_PFNMAP=y
CONFIG_ARCH_SUPPORTS_PUD_PFNMAP=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_CMA=y
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=7
CONFIG_PAGE_BLOCK_MAX_ORDER=10
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ZONE_DEVICE=y
CONFIG_HMM_MIRROR=y
CONFIG_GET_FREE_REGION=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_VMAP_PFN=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_ARCH_USES_PG_ARCH_2=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_DMAPOOL_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
CONFIG_MEMFD_CREATE=y
CONFIG_SECRETMEM=y
CONFIG_ANON_VMA_NAME=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_USERFAULTFD_RWP=y
CONFIG_USERFAULTFD=y
CONFIG_PTE_MARKER_UFFD_WP=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
# CONFIG_LRU_GEN_STATS is not set
CONFIG_LRU_GEN_WALKS_MMU=y
CONFIG_ARCH_SUPPORTS_PER_VMA_LOCK=y
CONFIG_PER_VMA_LOCK=y
CONFIG_LOCK_MM_AND_FIND_VMA=y
CONFIG_IOMMU_MM_DATA=y
CONFIG_EXECMEM=y
CONFIG_NUMA_MEMBLKS=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_HAS_USER_SHADOW_STACK=y
CONFIG_PT_RECLAIM=y
CONFIG_FIND_NORMAL_PAGE=y
CONFIG_ARCH_HAS_LAZY_MMU_MODE=y
#
# Data Access Monitoring
#
CONFIG_DAMON=y
# CONFIG_DAMON_DEBUG_SANITY is not set
CONFIG_DAMON_VADDR=y
CONFIG_DAMON_PADDR=y
CONFIG_DAMON_SYSFS=y
CONFIG_DAMON_RECLAIM=y
CONFIG_DAMON_LRU_SORT=y
CONFIG_DAMON_STAT=y
# CONFIG_DAMON_STAT_ENABLED_DEFAULT is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_XGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_DECRYPTED=y
CONFIG_SKB_EXTENSIONS=y
CONFIG_NET_DEVMEM=y
CONFIG_NET_SHAPER=y
CONFIG_NET_CRC32C=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_INET_PSP=y
CONFIG_UNIX=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_USER_COMPAT is not set
CONFIG_XFRM_INTERFACE=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XFRM_IPTFS=m
CONFIG_XFRM_ESPINTCP=y
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
CONFIG_SMC_HS_CTRL_BPF=y
CONFIG_DIBS=m
CONFIG_DIBS_LO=y
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=m
CONFIG_NET_HANDSHAKE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
CONFIG_TCP_CONG_CDG=m
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_AO=y
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_ESPINTCP=y
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_ILA=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_FOU=m
CONFIG_IPV6_FOU_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
CONFIG_IPV6_RPL_LWTUNNEL=y
CONFIG_IPV6_IOAM6_LWTUNNEL=y
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=m
CONFIG_MPTCP_IPV6=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_BPF_LINK=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CONNTRACK_OVS=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NF_NAT_OVS=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
# CONFIG_NFT_EXTHDR_DCCP is not set
CONFIG_NFT_FLOW_OFFLOAD=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_TUNNEL=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NF_FLOW_TABLE_PROCFS=y
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XTABLES_COMPAT=y
CONFIG_NETFILTER_XTABLES_LEGACY=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=15
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_MH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_TWOS=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_IP_NF_IPTABLES_LEGACY=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_NFT_COMPAT_ARP=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_IPTABLES_LEGACY=m
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA256=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_IB=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE_MRP=y
CONFIG_BRIDGE_CFM=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_NONE=m
CONFIG_NET_DSA_TAG_AR9331=m
CONFIG_NET_DSA_TAG_BRCM_COMMON=m
CONFIG_NET_DSA_TAG_BRCM=m
CONFIG_NET_DSA_TAG_BRCM_LEGACY=m
CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS=m
CONFIG_NET_DSA_TAG_BRCM_PREPEND=m
CONFIG_NET_DSA_TAG_HELLCREEK=m
CONFIG_NET_DSA_TAG_GSWIP=m
CONFIG_NET_DSA_TAG_DSA_COMMON=m
CONFIG_NET_DSA_TAG_DSA=m
CONFIG_NET_DSA_TAG_EDSA=m
# CONFIG_NET_DSA_TAG_MT7628 is not set
CONFIG_NET_DSA_TAG_MTK=m
CONFIG_NET_DSA_TAG_MXL_862XX=m
CONFIG_NET_DSA_TAG_MXL_GSW1XX=m
CONFIG_NET_DSA_TAG_KSZ=m
# CONFIG_NET_DSA_TAG_NETC is not set
CONFIG_NET_DSA_TAG_OCELOT=m
CONFIG_NET_DSA_TAG_OCELOT_8021Q=m
CONFIG_NET_DSA_TAG_QCA=m
CONFIG_NET_DSA_TAG_RTL4_A=m
CONFIG_NET_DSA_TAG_RTL8_4=m
CONFIG_NET_DSA_TAG_RZN1_A5PSW=m
CONFIG_NET_DSA_TAG_LAN9303=m
CONFIG_NET_DSA_TAG_SJA1105=m
CONFIG_NET_DSA_TAG_TRAILER=m
CONFIG_NET_DSA_TAG_VSC73XX_8021Q=m
CONFIG_NET_DSA_TAG_XRS700X=m
CONFIG_NET_DSA_TAG_YT921X=m
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_PHONET=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_IEEE802154=m
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_CBS=m
CONFIG_NET_SCH_ETF=m
CONFIG_NET_SCH_MQPRIO_LIB=m
CONFIG_NET_SCH_TAPRIO=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_SKBPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_FQ_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
CONFIG_NET_SCH_ETS=m
CONFIG_NET_SCH_BPF=y
CONFIG_NET_SCH_DUALPI2=m
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_FQ_PIE is not set
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_EMATCH_IPT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_MPLS=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_CTINFO=m
CONFIG_NET_ACT_SKBMOD=m
CONFIG_NET_ACT_IFE=m
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_ACT_CT=m
CONFIG_NET_ACT_GATE=m
CONFIG_NET_IFE_SKBMARK=m
CONFIG_NET_IFE_SKBPRIO=m
CONFIG_NET_IFE_SKBTCINDEX=m
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_OPENVSWITCH=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_HYPERV_VSOCKETS=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=m
CONFIG_HSR=m
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=m
CONFIG_QRTR_SMD=m
CONFIG_QRTR_TUN=m
CONFIG_QRTR_MHI=m
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
CONFIG_NCSI_OEM_CMD_KEEP_PHY=y
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_MAX_SKB_FRAGS=17
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_LE=y
CONFIG_BT_LE_L2CAP_ECRED=y
CONFIG_BT_6LOWPAN=m
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_QCA=m
CONFIG_BT_MTK=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_POLL_SYNC=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_NOKIA=m
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_RTL=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIUART_AML=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBCM4377=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_MTKSDIO=m
CONFIG_BT_MTKUART=m
CONFIG_BT_HCIRSI=m
CONFIG_BT_VIRTIO=m
CONFIG_BT_NXPUART=m
CONFIG_BT_INTEL_PCIE=m
# end of Bluetooth device drivers
CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_IPV6=y
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_INJECT_RX_DELAY is not set
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_RXGK=y
# CONFIG_RXPERF is not set
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_MCTP_FLOWS=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=m
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_XEN=m
CONFIG_NET_9P_USBG=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CEPH_LIB=m
CONFIG_CEPH_LIB_PRETTYDEBUG=y
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
CONFIG_NFC_NCI_SPI=m
CONFIG_NFC_NCI_UART=m
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=m
CONFIG_NFC_MEI_PHY=m
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
CONFIG_NFC_VIRTUAL_NCI=m
CONFIG_NFC_FDP=m
CONFIG_NFC_FDP_I2C=m
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_PN544_MEI=m
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_USB=m
CONFIG_NFC_PN533_I2C=m
CONFIG_NFC_PN532_UART=m
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
CONFIG_NFC_MICROREAD_MEI=m
CONFIG_NFC_MRVL=m
CONFIG_NFC_MRVL_USB=m
CONFIG_NFC_MRVL_UART=m
CONFIG_NFC_MRVL_I2C=m
CONFIG_NFC_MRVL_SPI=m
CONFIG_NFC_ST21NFCA=m
CONFIG_NFC_ST21NFCA_I2C=m
CONFIG_NFC_ST_NCI=m
CONFIG_NFC_ST_NCI_I2C=m
CONFIG_NFC_ST_NCI_SPI=m
CONFIG_NFC_NXP_NCI=m
CONFIG_NFC_NXP_NCI_I2C=m
CONFIG_NFC_S3FWRN5=m
CONFIG_NFC_S3FWRN5_I2C=m
CONFIG_NFC_S3FWRN82_UART=m
CONFIG_NFC_ST95HF=m
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_IEEE8021Q_HELPERS=y
CONFIG_NET_SELFTESTS=m
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
CONFIG_PCIE_EDR=y
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=m
CONFIG_XEN_PCIDEV_FRONTEND=m
CONFIG_PCI_ATS=y
CONFIG_PCI_IDE=y
CONFIG_PCI_TSM=y
CONFIG_PCI_DOE=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_NPEM=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCIE_TPH=y
CONFIG_PCI_P2PDMA=y
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=10
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
# CONFIG_HOTPLUG_PCI_OCTEONEP is not set
CONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#
CONFIG_PCI_HOST_COMMON=y
CONFIG_VMD=m
CONFIG_PCI_HYPERV_INTERFACE=m
#
# Cadence-based PCIe controllers
#
# end of Cadence-based PCIe controllers
#
# DesignWare-based PCIe controllers
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_DEBUGFS=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCI_MESON=m
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
# end of DesignWare-based PCIe controllers
#
# Mobiveil-based PCIe controllers
#
# end of Mobiveil-based PCIe controllers
#
# PLDA-based PCIe controllers
#
# end of PLDA-based PCIe controllers
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers
CONFIG_PCI_PWRCTRL=m
# CONFIG_PCI_PWRCTRL_GENERIC is not set
CONFIG_PCI_PWRCTRL_TC9563=m
CONFIG_CXL_BUS=m
CONFIG_CXL_PCI=m
# CONFIG_CXL_MEM_RAW_COMMANDS is not set
CONFIG_CXL_ACPI=m
CONFIG_CXL_PMEM=m
CONFIG_CXL_MEM=m
CONFIG_CXL_FEATURES=y
CONFIG_CXL_PORT=m
CONFIG_CXL_SUSPEND=y
CONFIG_CXL_REGION=y
# CONFIG_CXL_REGION_INVALIDATION_TEST is not set
CONFIG_CXL_MCE=y
CONFIG_CXL_RAS=y
CONFIG_CXL_ATL=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_DRIVER_DEFERRED_PROBE_TIMEOUT=10
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_DEBUG=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
CONFIG_FW_CACHE=y
CONFIG_FW_UPLOAD=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_HMEM_REPORTING=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=m
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_W1=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_REGMAP_SOUNDWIRE_MBQ=m
CONFIG_REGMAP_SCCB=m
CONFIG_REGMAP_SPI_AVMM=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
# end of Generic Driver Options
#
# Bus devices
#
CONFIG_MHI_BUS=m
# CONFIG_MHI_BUS_DEBUG is not set
CONFIG_MHI_BUS_PCI_GENERIC=m
CONFIG_MHI_BUS_EP=m
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_SYSFB=y
CONFIG_SYSFB_SIMPLEFB=y
CONFIG_FW_CS_DSP=m
CONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_SMI is not set
CONFIG_GOOGLE_CBMEM=m
CONFIG_GOOGLE_COREBOOT_TABLE=m
CONFIG_GOOGLE_MEMCONSOLE=m
# CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY is not set
CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT=m
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=m
CONFIG_GOOGLE_VPD=m
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_SOFT_RESERVE=y
CONFIG_EFI_DXE_MEM_ATTRIBUTES=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_BOOTLOADER_CONTROL=m
CONFIG_EFI_CAPSULE_LOADER=m
# CONFIG_EFI_TEST is not set
CONFIG_EFI_DEV_PATH_PARSER=y
CONFIG_APPLE_PROPERTIES=y
# CONFIG_RESET_ATTACK_MITIGATION is not set
CONFIG_EFI_RCI2_TABLE=y
# CONFIG_EFI_DISABLE_PCI_DMA is not set
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
CONFIG_EFI_COCO_SECRET=y
CONFIG_OVMF_DEBUG_LOG=y
CONFIG_UNACCEPTED_MEMORY=y
CONFIG_EFI_EMBEDDED_FIRMWARE=y
CONFIG_EFI_SBAT_FILE=""
# end of EFI (Extensible Firmware Interface) Support
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
#
# Qualcomm firmware drivers
#
CONFIG_QCOM_PAS=m
# CONFIG_QCOM_PAS_TEE is not set
CONFIG_QCOM_SCM=m
CONFIG_QCOM_TZMEM=m
CONFIG_QCOM_TZMEM_MODE_GENERIC=y
# CONFIG_QCOM_TZMEM_MODE_SHMBRIDGE is not set
# end of Qualcomm firmware drivers
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_FWCTL=m
# CONFIG_FWCTL_BNXT is not set
CONFIG_FWCTL_MLX5=m
CONFIG_FWCTL_PDS=m
CONFIG_GNSS=m
CONFIG_GNSS_SERIAL=m
CONFIG_GNSS_MTK_SERIAL=m
CONFIG_GNSS_SIRF_SERIAL=m
CONFIG_GNSS_UBX_SERIAL=m
CONFIG_GNSS_USB=m
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
#
# Partition parsers
#
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
CONFIG_MTD_PSTORE=m
# CONFIG_MTD_SWAP is not set
CONFIG_MTD_PARTITIONED_MASTER=y
# CONFIG_MTD_VIRT_CONCAT is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_MCHP23K256 is not set
# CONFIG_MTD_MCHP48L640 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
CONFIG_MTD_INTEL_DG=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers
#
# NAND
#
CONFIG_MTD_NAND_CORE=m
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_RAW_NAND=m
#
# Raw/parallel NAND flash controllers
#
# CONFIG_MTD_NAND_DENALI_PCI is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_MXIC is not set
# CONFIG_MTD_NAND_GPIO is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_ARASAN is not set
#
# Misc
#
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_SPI_NAND is not set
#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_ECC_MXIC=y
# end of ECC engine support
# end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_SPI_NOR=m
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_MTD_UBI_NVMEM=m
# CONFIG_MTD_HYPERBUS is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_FD_RAWCMD is not set
CONFIG_CDROM=m
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
CONFIG_ZRAM_BACKEND_LZ4=y
CONFIG_ZRAM_BACKEND_LZ4HC=y
CONFIG_ZRAM_BACKEND_ZSTD=y
CONFIG_ZRAM_BACKEND_DEFLATE=y
CONFIG_ZRAM_BACKEND_842=y
CONFIG_ZRAM_BACKEND_LZO=y
# CONFIG_ZRAM_DEF_COMP_LZORLE is not set
# CONFIG_ZRAM_DEF_COMP_LZO is not set
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
CONFIG_ZRAM_DEF_COMP_ZSTD=y
# CONFIG_ZRAM_DEF_COMP_DEFLATE is not set
# CONFIG_ZRAM_DEF_COMP_842 is not set
CONFIG_ZRAM_DEF_COMP="zstd"
CONFIG_ZRAM_WRITEBACK=y
CONFIG_ZRAM_TRACK_ENTRY_ACTIME=y
CONFIG_ZRAM_MEMORY_TRACKING=y
CONFIG_ZRAM_MULTI_COMP=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_XEN_BLKDEV_BACKEND=m
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_RBD=m
CONFIG_BLK_DEV_UBLK=m
CONFIG_BLKDEV_UBLK_LEGACY_OPCODES=y
CONFIG_BLK_DEV_RNBD=y
CONFIG_BLK_DEV_RNBD_CLIENT=m
CONFIG_BLK_DEV_RNBD_SERVER=m
CONFIG_BLK_DEV_ZONED_LOOP=m
#
# NVME Support
#
CONFIG_NVME_KEYRING=m
CONFIG_NVME_AUTH=m
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_VERBOSE_ERRORS=y
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=m
CONFIG_NVME_RDMA=m
CONFIG_NVME_FC=m
CONFIG_NVME_TCP=m
CONFIG_NVME_TCP_TLS=y
CONFIG_NVME_HOST_AUTH=y
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_DEBUGFS=y
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_RDMA=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
CONFIG_NVME_TARGET_TCP=m
CONFIG_NVME_TARGET_TCP_TLS=y
CONFIG_NVME_TARGET_AUTH=y
# CONFIG_NVME_TARGET_AUTH_DEBUG is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
# CONFIG_DUMMY_IRQ is not set
CONFIG_PHANTOM=m
CONFIG_RPMB=m
CONFIG_TI_FPC202=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SMPRO_ERRMON=m
CONFIG_SMPRO_MISC=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_VMWARE_BALLOON=m
CONFIG_LATTICE_ECP3_CONFIG=m
# CONFIG_SRAM is not set
CONFIG_DW_XDATA_PCIE=m
CONFIG_PCI_ENDPOINT_TEST=m
CONFIG_XILINX_SDFEC=m
CONFIG_MISC_RTSX=m
CONFIG_NTSYNC=m
CONFIG_TPS6594_ESM=m
CONFIG_TPS6594_PFSM=m
CONFIG_NSM=m
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_IDT_89HPESX=m
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
CONFIG_INTEL_MEI_TXE=m
CONFIG_INTEL_MEI_GSC=m
# CONFIG_INTEL_MEI_CSC is not set
CONFIG_INTEL_MEI_VSC_HW=m
CONFIG_INTEL_MEI_VSC=m
CONFIG_INTEL_MEI_LB=m
CONFIG_INTEL_MEI_HDCP=m
CONFIG_INTEL_MEI_PXP=m
CONFIG_INTEL_MEI_GSC_PROXY=m
CONFIG_VMWARE_VMCI=m
CONFIG_GENWQE=m
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_BCM_VK=m
CONFIG_BCM_VK_TTY=y
CONFIG_MISC_ALCOR_PCI=m
CONFIG_MISC_RTSX_PCI=m
CONFIG_MISC_RTSX_USB=m
CONFIG_UACCE=m
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=m
CONFIG_PVPANIC_PCI=m
CONFIG_GP_PCI1XXXX=m
CONFIG_KEBA_CP500=m
CONFIG_KEBA_LAN9252=m
# CONFIG_INTEL_SSEI is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPI3MR=m
# CONFIG_SCSI_LEAPRAID is not set
CONFIG_SCSI_SMARTPQI=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_SCSI_MYRB=m
CONFIG_SCSI_MYRS=m
CONFIG_VMWARE_PVSCSI=m
CONFIG_XEN_SCSI_FRONTEND=m
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_SNIC=m
# CONFIG_SCSI_SNIC_DEBUG_FS is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_FDOMAIN=m
CONFIG_SCSI_FDOMAIN_PCI=m
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
# CONFIG_TCM_QLA2XXX_DEBUG is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_QEDI=m
CONFIG_QEDF=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_EFCT=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_WD719X=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=3
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_AHCI_DWC=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_DWC=m
# CONFIG_SATA_DWC_OLD_DMA is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_PARPORT=m
#
# Parallel IDE protocol modules
#
CONFIG_PATA_PARPORT_ATEN=m
CONFIG_PATA_PARPORT_BPCK=m
CONFIG_PATA_PARPORT_BPCK6=m
CONFIG_PATA_PARPORT_COMM=m
CONFIG_PATA_PARPORT_DSTR=m
CONFIG_PATA_PARPORT_FIT2=m
CONFIG_PATA_PARPORT_FIT3=m
CONFIG_PATA_PARPORT_EPAT=m
CONFIG_PATA_PARPORT_EPATC8=y
CONFIG_PATA_PARPORT_EPIA=m
CONFIG_PATA_PARPORT_FRIQ=m
CONFIG_PATA_PARPORT_FRPW=m
CONFIG_PATA_PARPORT_KBIC=m
CONFIG_PATA_PARPORT_KTTI=m
CONFIG_PATA_PARPORT_ON20=m
CONFIG_PATA_PARPORT_ON26=m
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_BITMAP=y
CONFIG_MD_LLBITMAP=y
CONFIG_MD_BITMAP_FILE=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_CLUSTER=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
CONFIG_BCACHE_ASYNC_REGISTRATION=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_UNSTRIPED=m
CONFIG_DM_CRYPT=m
# CONFIG_DM_INLINECRYPT is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
CONFIG_DM_EBS=m
CONFIG_DM_ERA=m
CONFIG_DM_CLONE=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_MULTIPATH_HST=m
CONFIG_DM_MULTIPATH_IOA=m
CONFIG_DM_DELAY=m
CONFIG_DM_DUST=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_PLATFORM_KEYRING=y
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_DM_ZONED=m
CONFIG_DM_AUDIT=y
CONFIG_DM_VDO=m
CONFIG_DM_PCACHE=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_ISCSI_TARGET_CXGB4=m
CONFIG_SBP_TARGET=m
CONFIG_REMOTE_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_WIREGUARD=m
# CONFIG_WIREGUARD_DEBUG is not set
CONFIG_OVPN=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=m
CONFIG_IPVTAP=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_BAREUDP=m
CONFIG_GTP=m
CONFIG_PFCP=m
CONFIG_AMT=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
# CONFIG_NETCONSOLE_EXTENDED_LOG is not set
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=m
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_NETKIT=y
CONFIG_NET_VRF=m
CONFIG_VSOCKMON=m
CONFIG_MHI_NET=m
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_SOLOS=m
#
# Distributed Switch Architecture drivers
#
CONFIG_B53=m
CONFIG_B53_SPI_DRIVER=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_B53_SRAB_DRIVER=m
CONFIG_B53_SERDES=m
CONFIG_NET_DSA_BCM_SF2=m
CONFIG_NET_DSA_LOOP=m
CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK=m
CONFIG_NET_DSA_LANTIQ_COMMON=m
# CONFIG_NET_DSA_LANTIQ_GSWIP is not set
CONFIG_NET_DSA_MXL_GSW1XX=m
CONFIG_NET_DSA_MT7530=m
CONFIG_NET_DSA_MT7530_MDIO=m
CONFIG_NET_DSA_MT7530_MMIO=m
CONFIG_NET_DSA_MV88E6060=m
CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m
CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=m
CONFIG_NET_DSA_MICROCHIP_KSZ_SPI=m
CONFIG_NET_DSA_MICROCHIP_KSZ_PTP=y
CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI=m
CONFIG_NET_DSA_MV88E6XXX=m
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_MV88E6XXX_LEDS=y
CONFIG_NET_DSA_MXL862=m
CONFIG_NET_DSA_MSCC_FELIX_DSA_LIB=m
CONFIG_NET_DSA_MSCC_OCELOT_EXT=m
CONFIG_NET_DSA_MSCC_SEVILLE=m
CONFIG_NET_DSA_AR9331=m
CONFIG_NET_DSA_QCA8K=m
CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y
CONFIG_NET_DSA_SJA1105=m
CONFIG_NET_DSA_SJA1105_PTP=y
CONFIG_NET_DSA_SJA1105_TAS=y
CONFIG_NET_DSA_SJA1105_VL=y
CONFIG_NET_DSA_XRS700X=m
CONFIG_NET_DSA_XRS700X_I2C=m
CONFIG_NET_DSA_XRS700X_MDIO=m
CONFIG_NET_DSA_REALTEK=m
CONFIG_NET_DSA_KS8995=m
CONFIG_NET_DSA_SMSC_LAN9303=m
CONFIG_NET_DSA_SMSC_LAN9303_I2C=m
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m
CONFIG_NET_DSA_VITESSE_VSC73XX=m
CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=m
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m
CONFIG_NET_DSA_YT921X=m
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=m
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_SLICOSS=m
CONFIG_NET_VENDOR_ALIBABA=y
# CONFIG_ALIBABA_EEA is not set
CONFIG_ALTERA_TSE=m
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_ENA_ETHERNET=m
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
CONFIG_AMD_XGBE=m
CONFIG_AMD_XGBE_DCB=y
CONFIG_AMD_XGBE_HAVE_ECC=y
CONFIG_PDS_CORE=m
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=m
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_SPI_AX88796C=m
CONFIG_SPI_AX88796C_COMPRESSION=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
CONFIG_CX_ECAT=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BCMGENET=m
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
CONFIG_SYSTEMPORT=m
CONFIG_BNXT=m
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_FLOWER_OFFLOAD=y
CONFIG_BNXT_DCB=y
CONFIG_BNXT_HWMON=y
CONFIG_BNGE=m
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=m
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_MACB_PCI=m
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_THUNDER_NIC_PF=m
CONFIG_THUNDER_NIC_VF=m
CONFIG_THUNDER_NIC_BGX=m
CONFIG_THUNDER_NIC_RGX=m
CONFIG_CAVIUM_PTP=m
CONFIG_LIQUIDIO_CORE=m
CONFIG_LIQUIDIO=m
CONFIG_LIQUIDIO_VF=m
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4_DCB=y
CONFIG_CHELSIO_T4_FCOE=y
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_CHELSIO_INLINE_CRYPTO=y
CONFIG_CHELSIO_IPSEC_INLINE=m
CONFIG_CHELSIO_TLS_DEVICE=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_DM9051=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_BE2=y
CONFIG_BE2NET_BE3=y
CONFIG_BE2NET_LANCER=y
CONFIG_BE2NET_SKYHAWK=y
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_TSNEP=m
# CONFIG_TSNEP_SELFTESTS is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_FUN_CORE=m
CONFIG_FUN_ETH=m
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_GVE=m
CONFIG_NET_VENDOR_HISILICON=y
CONFIG_HIBMCGE=m
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_HINIC=m
CONFIG_HINIC3=m
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_LIBETH=m
CONFIG_LIBETH_XDP=m
CONFIG_LIBIE=m
CONFIG_LIBIE_ADMINQ=m
CONFIG_LIBIE_CP=m
CONFIG_LIBIE_FWLOG=m
CONFIG_LIBIE_PCI=m
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_E1000E_HWTS=y
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
# CONFIG_IXGBE_IPSEC is not set
CONFIG_IXGBEVF=m
CONFIG_IXGBEVF_IPSEC=y
CONFIG_I40E=m
CONFIG_I40E_DCB=y
CONFIG_IAVF=m
CONFIG_I40EVF=m
CONFIG_ICE=m
CONFIG_ICE_HWMON=y
CONFIG_ICE_SWITCHDEV=y
CONFIG_ICE_HWTS=y
CONFIG_FM10K=m
CONFIG_IGC=m
CONFIG_IGC_LEDS=y
CONFIG_IDPF=m
# CONFIG_IDPF_SINGLEQ is not set
# CONFIG_IXD is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_ADI=y
CONFIG_ADIN1110=m
# CONFIG_ADIN1140 is not set
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_OCTEON_EP=m
CONFIG_OCTEON_EP_VF=m
CONFIG_PRESTERA=m
CONFIG_PRESTERA_PCI=m
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=m
CONFIG_MLX5_FPGA=y
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_EN_ARFS=y
CONFIG_MLX5_EN_RXNFC=y
CONFIG_MLX5_MPFS=y
CONFIG_MLX5_ESWITCH=y
CONFIG_MLX5_BRIDGE=y
CONFIG_MLX5_CLS_ACT=y
CONFIG_MLX5_TC_CT=y
CONFIG_MLX5_TC_SAMPLE=y
CONFIG_MLX5_CORE_EN_DCB=y
CONFIG_MLX5_CORE_IPOIB=y
CONFIG_MLX5_MACSEC=y
CONFIG_MLX5_EN_IPSEC=y
CONFIG_MLX5_EN_TLS=y
CONFIG_MLX5_SW_STEERING=y
CONFIG_MLX5_HW_STEERING=y
CONFIG_MLX5_SF=y
CONFIG_MLX5_SF_MANAGER=y
CONFIG_MLX5_DPLL=m
CONFIG_MLX5_EN_PSP=y
CONFIG_MLXSW_CORE=m
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_PCI=m
CONFIG_MLXSW_I2C=m
CONFIG_MLXSW_SPECTRUM=m
CONFIG_MLXSW_SPECTRUM_DCB=y
CONFIG_MLXSW_MINIMAL=m
CONFIG_MLXFW=m
CONFIG_NET_VENDOR_META=y
CONFIG_FBNIC=m
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_ENCX24J600=m
CONFIG_LAN743X=m
CONFIG_LAN865X=m
CONFIG_VCAP=y
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH_LIB=m
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_MICROSOFT_MANA=m
CONFIG_NET_VENDOR_MUCSE=y
CONFIG_MGBE=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NI=y
CONFIG_NI_XGE_MANAGEMENT_ENET=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=m
CONFIG_NFP_APP_FLOWER=y
CONFIG_NFP_APP_ABM_NIC=y
CONFIG_NFP_NET_IPSEC=y
# CONFIG_NFP_DEBUG is not set
CONFIG_NET_VENDOR_8390=y
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_OA_TC6=m
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_IONIC=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_NETXEN_NIC=m
CONFIG_QED=m
CONFIG_QED_LL2=y
CONFIG_QED_SRIOV=y
CONFIG_QEDE=m
CONFIG_QED_RDMA=y
CONFIG_QED_ISCSI=y
CONFIG_QED_FCOE=y
CONFIG_QED_OOO=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCOM_EMAC=m
CONFIG_RMNET=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_R8169_LEDS=y
CONFIG_RTASE=m
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_ROCKER=m
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=m
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_SFC_CXL=y
CONFIG_SFC_FALCON=m
CONFIG_SFC_FALCON_MTD=y
CONFIG_SFC_SIENA=m
CONFIG_SFC_SIENA_MTD=y
CONFIG_SFC_SIENA_MCDI_MON=y
CONFIG_SFC_SIENA_SRIOV=y
CONFIG_SFC_SIENA_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
CONFIG_SMSC911X=m
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_SELFTESTS is not set
CONFIG_STMMAC_PLATFORM=m
CONFIG_DWMAC_GENERIC=m
CONFIG_STMMAC_LIBPCI=m
CONFIG_DWMAC_INTEL=m
CONFIG_DWMAC_MOTORCOMM=m
CONFIG_STMMAC_PCI=m
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_DWC_XLGMAC=m
CONFIG_DWC_XLGMAC_PCI=m
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_TEHUTI_TN40=m
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_MSE102X=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WANGXUN=y
CONFIG_LIBWX=m
CONFIG_NGBE=m
CONFIG_TXGBE=m
CONFIG_TXGBEVF=m
CONFIG_NGBEVF=m
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=m
CONFIG_XILINX_AXI_EMAC=m
CONFIG_XILINX_LL_TEMAC=m
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_NET_VENDOR_ZTE=y
# CONFIG_DINGHAI is not set
CONFIG_FDDI=m
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_PHYLINK=m
CONFIG_PHYLIB=m
CONFIG_SWPHY=y
CONFIG_PHY_PACKAGE=m
CONFIG_LED_TRIGGER_PHY=y
CONFIG_OPEN_ALLIANCE_HELPERS=y
CONFIG_FIXED_PHY=m
CONFIG_SFP=m
#
# MII PHY device drivers
#
CONFIG_AS21XXX_PHY=m
# CONFIG_AIR_AN8801_PHY is not set
CONFIG_AIR_EN8811H_PHY=m
CONFIG_AIR_NET_PHYLIB=m
CONFIG_AMD_PHY=m
CONFIG_ADIN_PHY=m
CONFIG_ADIN1100_PHY=m
# CONFIG_ADIN1140_PHY is not set
CONFIG_AQUANTIA_PHY=m
CONFIG_AX88796B_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_BCM54140_PHY=m
CONFIG_BCM7XXX_PHY=m
CONFIG_BCM84881_PHY=m
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BCM_NET_PHYPTP=m
CONFIG_CICADA_PHY=m
CONFIG_CORTINA_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_LXT_PHY=m
CONFIG_INTEL_XWAY_PHY=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MARVELL_10G_PHY=m
CONFIG_MARVELL_88Q2XXX_PHY=m
CONFIG_MARVELL_88X2222_PHY=m
CONFIG_MAXLINEAR_GPHY=m
CONFIG_MAXLINEAR_86110_PHY=m
CONFIG_MEDIATEK_GE_PHY=m
# CONFIG_MEDIATEK_GE_SOC_PHY is not set
CONFIG_MTK_NET_PHYLIB=m
CONFIG_MICREL_PHY=m
CONFIG_MICROCHIP_T1S_PHY=m
CONFIG_MICROCHIP_PHY=m
CONFIG_MICROCHIP_T1_PHY=m
CONFIG_MICROCHIP_PHY_RDS_PTP=m
CONFIG_MICROSEMI_PHY=m
CONFIG_MOTORCOMM_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_NXP_CBTX_PHY=m
CONFIG_NXP_C45_TJA11XX_PHY=m
CONFIG_NXP_TJA11XX_PHY=m
CONFIG_NCN26000_PHY=m
CONFIG_QCOM_NET_PHYLIB=m
CONFIG_AT803X_PHY=m
CONFIG_QCA83XX_PHY=m
CONFIG_QCA808X_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_REALTEK_PHY_HWMON=y
CONFIG_RENESAS_PHY=m
# CONFIG_ROCKCHIP_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
CONFIG_TERANETICS_PHY=m
CONFIG_DP83822_PHY=m
CONFIG_DP83TC811_PHY=m
CONFIG_DP83848_PHY=m
CONFIG_DP83867_PHY=m
CONFIG_DP83869_PHY=m
CONFIG_DP83TD510_PHY=m
CONFIG_DP83TG720_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_XILINX_GMII2RGMII=m
CONFIG_PSE_CONTROLLER=y
# CONFIG_PSE_REALTEK_MCU_I2C is not set
# CONFIG_PSE_REALTEK_MCU_UART is not set
CONFIG_PSE_REGULATOR=m
CONFIG_PSE_PD692X0=m
CONFIG_PSE_SI3474=m
CONFIG_PSE_TPS23881=m
CONFIG_CAN_DEV=m
CONFIG_CAN_VCAN=m
CONFIG_CAN_VXCAN=m
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_RX_OFFLOAD=y
CONFIG_CAN_CAN327=m
# CONFIG_CAN_DUMMY is not set
CONFIG_CAN_JANZ_ICAN3=m
CONFIG_CAN_KVASER_PCIEFD=m
CONFIG_CAN_SLCAN=m
# CONFIG_CAN_VIRTIO_CAN is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
CONFIG_CAN_CC770_ISA=m
CONFIG_CAN_CC770_PLATFORM=m
CONFIG_CAN_CTUCANFD=m
CONFIG_CAN_CTUCANFD_PCI=m
CONFIG_CAN_ESD_402_PCI=m
CONFIG_CAN_IFI_CANFD=m
CONFIG_CAN_M_CAN=m
CONFIG_CAN_M_CAN_PCI=m
CONFIG_CAN_M_CAN_PLATFORM=m
CONFIG_CAN_M_CAN_TCAN4X5X=m
CONFIG_CAN_PEAK_PCIEFD=m
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_EMS_PCMCIA is not set
CONFIG_CAN_F81601=m
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PEAK_PCMCIA=m
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SOFTING=m
CONFIG_CAN_SOFTING_CS=m
#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=m
CONFIG_CAN_MCP251X=m
CONFIG_CAN_MCP251XFD=m
# CONFIG_CAN_MCP251XFD_SANITY is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB=m
CONFIG_CAN_ETAS_ES58X=m
CONFIG_CAN_F81604=m
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
CONFIG_CAN_MCBA_USB=m
CONFIG_CAN_NCT6694=m
CONFIG_CAN_PEAK_USB=m
CONFIG_CAN_UCAN=m
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
#
# MCTP Device Drivers
#
CONFIG_MCTP_SERIAL=m
CONFIG_MCTP_TRANSPORT_I2C=m
CONFIG_MCTP_TRANSPORT_USBLIB=m
CONFIG_MCTP_TRANSPORT_USB=m
# end of MCTP Device Drivers
#
# MDIO controller drivers
#
CONFIG_FWNODE_MDIO=m
CONFIG_ACPI_MDIO=m
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_BCM_UNIMAC=m
CONFIG_MDIO_CAVIUM=m
CONFIG_MDIO_GPIO=m
CONFIG_MDIO_I2C=m
CONFIG_MDIO_MVUSB=m
CONFIG_MDIO_MSCC_MIIM=m
CONFIG_MDIO_REGMAP=m
CONFIG_MDIO_THUNDER=m
#
# MDIO Multiplexers
#
# end of MDIO Multiplexers
# end of MDIO controller drivers
#
# PCS device drivers
#
CONFIG_PCS_XPCS=m
CONFIG_PCS_LYNX=m
CONFIG_PCS_MTK_LYNXI=m
# end of PCS device drivers
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOX=m
CONFIG_PPPOE=m
# CONFIG_PPPOE_HASH_BITS_1 is not set
# CONFIG_PPPOE_HASH_BITS_2 is not set
CONFIG_PPPOE_HASH_BITS_4=y
# CONFIG_PPPOE_HASH_BITS_8 is not set
CONFIG_PPPOE_HASH_BITS=4
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_NET_DRIVERS=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
CONFIG_USB_NET_AQC111=m
CONFIG_USB_RTL8153_ECM=m
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=m
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
CONFIG_ATH5K_DEBUG=y
CONFIG_ATH5K_TRACER=y
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_STATION_STATISTICS=y
CONFIG_ATH9K_DYNACK=y
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_PCI_NO_EEPROM=m
CONFIG_ATH9K_HTC=m
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_ATH9K_HWRNG=y
CONFIG_ATH9K_COMMON_SPECTRAL=y
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_DEBUGFS=y
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
CONFIG_ATH6KL_DEBUG=y
CONFIG_ATH6KL_TRACING=y
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_TRACING=y
CONFIG_WIL6210_DEBUGFS=y
CONFIG_ATH10K=m
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_PCI=m
CONFIG_ATH10K_SDIO=m
CONFIG_ATH10K_USB=m
CONFIG_ATH10K_DEBUG=y
CONFIG_ATH10K_DEBUGFS=y
CONFIG_ATH10K_LEDS=y
CONFIG_ATH10K_SPECTRAL=y
CONFIG_ATH10K_TRACING=y
CONFIG_WCN36XX=m
CONFIG_WCN36XX_DEBUGFS=y
CONFIG_ATH11K=m
CONFIG_ATH11K_AHB=m
CONFIG_ATH11K_PCI=m
CONFIG_ATH11K_DEBUG=y
CONFIG_ATH11K_DEBUGFS=y
# CONFIG_ATH11K_TRACING is not set
CONFIG_ATH11K_SPECTRAL=y
CONFIG_ATH11K_CFR=y
CONFIG_ATH12K=m
CONFIG_ATH12K_AHB=y
CONFIG_ATH12K_DEBUG=y
CONFIG_ATH12K_DEBUGFS=y
CONFIG_ATH12K_TRACING=y
CONFIG_ATH12K_COREDUMP=y
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_AT76C50X_USB=m
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMSMAC_LEDS=y
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
CONFIG_BRCM_TRACING=y
CONFIG_BRCMDBG=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
# end of iwl3945 / iwl4965 Debugging Options
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLMLD=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLWIFI_DEVICE_TRACING=y
# end of Debugging Options
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
# CONFIG_P54_SPI_DEFAULT_EEPROM is not set
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
CONFIG_MWL8K=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=m
CONFIG_MT76_CORE=m
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=m
CONFIG_MT76_SDIO=m
CONFIG_MT76x02_LIB=m
CONFIG_MT76x02_USB=m
CONFIG_MT76_CONNAC_LIB=m
CONFIG_MT792x_LIB=m
CONFIG_MT792x_USB=m
CONFIG_MT76x0_COMMON=m
CONFIG_MT76x0U=m
CONFIG_MT76x0E=m
CONFIG_MT76x2_COMMON=m
CONFIG_MT76x2E=m
CONFIG_MT76x2U=m
CONFIG_MT7603E=m
CONFIG_MT7615_COMMON=m
CONFIG_MT7615E=m
CONFIG_MT7663_USB_SDIO_COMMON=m
CONFIG_MT7663U=m
CONFIG_MT7663S=m
CONFIG_MT7915E=m
CONFIG_MT7921_COMMON=m
CONFIG_MT7921E=m
CONFIG_MT7921S=m
CONFIG_MT7921U=m
CONFIG_MT7996E=m
CONFIG_MT7925_COMMON=m
CONFIG_MT7925E=m
CONFIG_MT7925U=m
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WILC1000=m
CONFIG_WILC1000_SDIO=m
CONFIG_WILC1000_SPI=m
# CONFIG_WILC1000_HW_OOB_INTR is not set
CONFIG_WLAN_VENDOR_MORSEMICRO=y
# CONFIG_MM81X_USB is not set
# CONFIG_MM81X_SDIO is not set
CONFIG_WLAN_VENDOR_NXP=y
# CONFIG_NXPWIFI_SDIO is not set
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_PLFXLC=m
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192EE=m
CONFIG_RTL8821AE=m
CONFIG_RTL8192CU=m
CONFIG_RTL8192DU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8192D_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
CONFIG_RTL8XXXU=m
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_RTW88=m
CONFIG_RTW88_CORE=m
CONFIG_RTW88_PCI=m
CONFIG_RTW88_SDIO=m
CONFIG_RTW88_USB=m
CONFIG_RTW88_8822B=m
CONFIG_RTW88_8822C=m
CONFIG_RTW88_8723X=m
CONFIG_RTW88_8703B=m
CONFIG_RTW88_8723D=m
CONFIG_RTW88_8821C=m
CONFIG_RTW88_88XXA=m
CONFIG_RTW88_8821A=m
CONFIG_RTW88_8812A=m
CONFIG_RTW88_8814A=m
CONFIG_RTW88_8822BE=m
CONFIG_RTW88_8822BS=m
CONFIG_RTW88_8822BU=m
CONFIG_RTW88_8822CE=m
CONFIG_RTW88_8822CS=m
CONFIG_RTW88_8822CU=m
CONFIG_RTW88_8723DE=m
CONFIG_RTW88_8723DS=m
CONFIG_RTW88_8723CS=m
CONFIG_RTW88_8723DU=m
CONFIG_RTW88_8821CE=m
CONFIG_RTW88_8821CS=m
CONFIG_RTW88_8821CU=m
CONFIG_RTW88_8821AU=m
CONFIG_RTW88_8812AU=m
CONFIG_RTW88_8814AE=m
CONFIG_RTW88_8814AU=m
CONFIG_RTW88_DEBUG=y
CONFIG_RTW88_DEBUGFS=y
CONFIG_RTW88_LEDS=y
CONFIG_RTW89=m
CONFIG_RTW89_CORE=m
CONFIG_RTW89_PCI=m
CONFIG_RTW89_USB=m
CONFIG_RTW89_8851B=m
CONFIG_RTW89_8852A=m
CONFIG_RTW89_8852B_COMMON=m
CONFIG_RTW89_8852B=m
CONFIG_RTW89_8852BT=m
CONFIG_RTW89_8852C=m
CONFIG_RTW89_8922A=m
CONFIG_RTW89_8851BE=m
CONFIG_RTW89_8851BU=m
CONFIG_RTW89_8852AE=m
CONFIG_RTW89_8852AU=m
CONFIG_RTW89_8852BE=m
CONFIG_RTW89_8852BU=m
CONFIG_RTW89_8852BTE=m
CONFIG_RTW89_8852CE=m
CONFIG_RTW89_8852CU=m
CONFIG_RTW89_8922AE=m
# CONFIG_RTW89_8922AU is not set
# CONFIG_RTW89_8922DE is not set
CONFIG_RTW89_DEBUG=y
CONFIG_RTW89_DEBUGMSG=y
CONFIG_RTW89_DEBUGFS=y
CONFIG_RTW89_LEDS=y
CONFIG_RTW89_LEDS_MC=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=m
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=m
CONFIG_RSI_USB=m
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WFX=m
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=m
CONFIG_CW1200_WLAN_SDIO=m
CONFIG_CW1200_WLAN_SPI=m
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SDIO=m
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_QTNFMAC=m
CONFIG_QTNFMAC_PCIE=m
CONFIG_MAC80211_HWSIM=m
CONFIG_VIRT_WIFI=m
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IEEE802154_AT86RF230=m
CONFIG_IEEE802154_MRF24J40=m
CONFIG_IEEE802154_CC2520=m
CONFIG_IEEE802154_ATUSB=m
CONFIG_IEEE802154_ADF7242=m
CONFIG_IEEE802154_CA8210=m
# CONFIG_IEEE802154_CA8210_DEBUGFS is not set
CONFIG_IEEE802154_MCR20A=m
CONFIG_IEEE802154_HWSIM=m
#
# Wireless WAN
#
CONFIG_WWAN=m
CONFIG_WWAN_DEBUGFS=y
CONFIG_WWAN_HWSIM=m
CONFIG_MHI_WWAN_CTRL=m
CONFIG_MHI_WWAN_MBIM=m
CONFIG_RPMSG_WWAN_CTRL=m
CONFIG_IOSM=m
CONFIG_MTK_T7XX=m
# end of Wireless WAN
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_XEN_NETDEV_BACKEND=m
CONFIG_VMXNET3=m
CONFIG_FUJITSU_ES=m
CONFIG_USB4_NET=m
CONFIG_HYPERV_NET=m
CONFIG_NETDEVSIM=m
CONFIG_NET_FAILOVER=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=m
CONFIG_KEYBOARD_ADP5520=m
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_APPLESPI=m
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=m
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_QT2160=m
CONFIG_KEYBOARD_DLINK_DIR685=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
# CONFIG_KEYBOARD_CHARLIEPLEX is not set
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MAX7360=m
CONFIG_KEYBOARD_MPR121=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_PINEPHONE=m
CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_IQS62X=m
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
CONFIG_KEYBOARD_TWL4030=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_KEYBOARD_MTK_PMIC=m
CONFIG_KEYBOARD_CYPRESS_SF=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADC=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=m
CONFIG_JOYSTICK_IFORCE_232=m
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_JOYSTICK_PSXPAD_SPI=m
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_JOYSTICK_PXRC=m
CONFIG_JOYSTICK_QWIIC=m
CONFIG_JOYSTICK_FSIA6B=m
CONFIG_JOYSTICK_SENSEHAT=m
CONFIG_JOYSTICK_SEESAW=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_PEGASUS=m
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=m
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_ADC=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_BU21029=m
CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=m
CONFIG_TOUCHSCREEN_CY8CTMA140=m
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP_SPI=m
CONFIG_TOUCHSCREEN_CYTTSP5=m
CONFIG_TOUCHSCREEN_DA9034=m
CONFIG_TOUCHSCREEN_DA9052=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
CONFIG_TOUCHSCREEN_EXC3000=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=m
CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE=m
CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C=m
CONFIG_TOUCHSCREEN_GOODIX_BERLIN_SPI=m
CONFIG_TOUCHSCREEN_HIDEEP=m
CONFIG_TOUCHSCREEN_HIMAX_HX852X=m
CONFIG_TOUCHSCREEN_HYCON_HY46XX=m
CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX=m
CONFIG_TOUCHSCREEN_HYNITRON_CST816X=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_ILITEK=m
CONFIG_TOUCHSCREEN_S6SY761=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_WACOM_W9000 is not set
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MELFAS_MIP4=m
CONFIG_TOUCHSCREEN_MSG2638=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_NOVATEK_NVT_TS=m
CONFIG_TOUCHSCREEN_IMAGIS=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
CONFIG_TOUCHSCREEN_WM831X=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
CONFIG_TOUCHSCREEN_RM_TS=m
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_STMFTS=m
CONFIG_TOUCHSCREEN_SUR40=m
CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
CONFIG_TOUCHSCREEN_SX8654=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_TOUCHSCREEN_ZET6223=m
CONFIG_TOUCHSCREEN_ZFORCE=m
CONFIG_TOUCHSCREEN_COLIBRI_VF50=m
CONFIG_TOUCHSCREEN_ROHM_BU21023=m
CONFIG_TOUCHSCREEN_IQS5XX=m
CONFIG_TOUCHSCREEN_IQS7211=m
CONFIG_TOUCHSCREEN_ZINITIX=m
CONFIG_TOUCHSCREEN_HIMAX_HX83112B=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=m
CONFIG_INPUT_88PM80X_ONKEY=m
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_AD714X_SPI=m
CONFIG_INPUT_ARIZONA_HAPTICS=m
CONFIG_INPUT_ATC260X_ONKEY=m
CONFIG_INPUT_AW86927=m
CONFIG_INPUT_BMA150=m
# CONFIG_INPUT_CS40L50_VIBRA is not set
CONFIG_INPUT_E3X0_BUTTON=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MAX7360_ROTARY=m
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MAX8925_ONKEY=m
CONFIG_INPUT_MAX8997_HAPTIC=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_GPIO_BEEPER=m
CONFIG_INPUT_GPIO_DECODER=m
CONFIG_INPUT_GPIO_VIBRA=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_REGULATOR_HAPTIC=m
CONFIG_INPUT_RETU_PWRBUTTON=m
CONFIG_INPUT_TPS6594_PWRBUTTON=m
CONFIG_INPUT_AXP20X_PEK=m
CONFIG_INPUT_TWL4030_PWRBUTTON=m
CONFIG_INPUT_TWL4030_VIBRA=m
CONFIG_INPUT_TWL6040_VIBRA=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PALMAS_PWRBUTTON=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_PWM_VIBRA=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_DA7280_HAPTICS=m
CONFIG_INPUT_DA9052_ONKEY=m
CONFIG_INPUT_DA9055_ONKEY=m
CONFIG_INPUT_DA9063_ONKEY=m
CONFIG_INPUT_WM831X_ON=m
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_ADXL34X_SPI=m
CONFIG_INPUT_IBM_PANEL=m
CONFIG_INPUT_IMS_PCU=m
CONFIG_INPUT_IQS269A=m
CONFIG_INPUT_IQS626A=m
CONFIG_INPUT_IQS7222=m
# CONFIG_INPUT_ISA1200_HAPTIC is not set
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
CONFIG_INPUT_SOC_BUTTON_ARRAY=m
# CONFIG_INPUT_AMD_SFH_TABLETMODE is not set
CONFIG_INPUT_DRV260X_HAPTICS=m
CONFIG_INPUT_DRV2665_HAPTICS=m
CONFIG_INPUT_DRV2667_HAPTICS=m
CONFIG_INPUT_QNAP_MCU=m
CONFIG_INPUT_RAVE_SP_PWRBUTTON=m
CONFIG_INPUT_RT5120_PWRKEY=m
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F1A=y
CONFIG_RMI4_F21=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
CONFIG_SERIO_GPIO_PS2=m
CONFIG_USERIO=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LEGACY_TIOCSTI is not set
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCILIB=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=m
CONFIG_SERIAL_8250_MOXA_PCIE=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_MEN_MCB=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_PCI1XXXX=m
CONFIG_SERIAL_8250_DFL=m
CONFIG_SERIAL_8250_DW=m
CONFIG_SERIAL_8250_KEBA=m
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=m
CONFIG_SERIAL_8250_MID=m
CONFIG_SERIAL_8250_PERICOM=m
CONFIG_SERIAL_8250_NI=m
CONFIG_SERIAL_8250_DWLIB=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=m
CONFIG_SERIAL_MAX310X=m
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_SCCNXP=m
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_I2C=m
CONFIG_SERIAL_SC16IS7XX_SPI=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=m
CONFIG_SERIAL_FSL_LINFLEXUART=m
CONFIG_SERIAL_MEN_Z135=m
CONFIG_SERIAL_SPRD=m
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_N_HDLC=m
# CONFIG_N_GSM is not set
CONFIG_NOZOMI=m
CONFIG_NULL_TTY=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_RPMSG_TTY=m
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SI_ASYNC_INIT is not set
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_IPMB=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_SSIF_IPMI_BMC=m
CONFIG_IPMB_DEVICE_INTERFACE=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_BA431=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_XIPHERA=m
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TPM2_HMAC=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=m
CONFIG_TCG_TIS_SPI_CR50=y
CONFIG_TCG_TIS_I2C=m
CONFIG_TCG_TIS_I2C_CR50=m
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_XEN=m
CONFIG_TCG_CRB=y
CONFIG_TCG_VTPM_PROXY=m
CONFIG_TCG_SVSM=m
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
CONFIG_TCG_TIS_ST33ZP24_SPI=m
CONFIG_TELCLOCK=m
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_PCIE=m
CONFIG_XILLYUSB=m
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_ATR=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_AMD_MP2=m
CONFIG_I2C_AMD_ASF=m
CONFIG_I2C_I801=m
CONFIG_I2C_I801_MUX=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_CHT_WC=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NVIDIA_GPU=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_ZHAOXIN=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_CGBC=m
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_AMDISP=m
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_EMEV2=m
CONFIG_I2C_GPIO=m
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
CONFIG_I2C_KEBA=m
CONFIG_I2C_KEMPLD=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_DLN2=m
CONFIG_I2C_LJCA=m
CONFIG_I2C_NCT6694=m
CONFIG_I2C_USBIO=m
CONFIG_I2C_CP2615=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PCI1XXXX=m
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_VIRTIO=m
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
CONFIG_I2C_SLAVE_TESTUNIT=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
CONFIG_I3C_OR_I2C=y
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SPI_OFFLOAD=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=m
CONFIG_SPI_ALTERA_CORE=m
CONFIG_SPI_ALTERA_DFL=m
CONFIG_SPI_AXI_SPI_ENGINE=m
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_CADENCE=m
CONFIG_SPI_CH341=m
CONFIG_SPI_CS42L43=m
CONFIG_SPI_DESIGNWARE=m
CONFIG_SPI_DW_DMA=y
CONFIG_SPI_DW_PCI=m
CONFIG_SPI_DW_MMIO=m
CONFIG_SPI_DLN2=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_INTEL=m
CONFIG_SPI_INTEL_PCI=m
CONFIG_SPI_INTEL_PLATFORM=m
CONFIG_SPI_KSPI2=m
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_LJCA=m
CONFIG_SPI_MICROCHIP_CORE_QSPI=m
CONFIG_SPI_MICROCHIP_CORE_SPI=m
# CONFIG_SPI_LANTIQ_SSC is not set
CONFIG_SPI_OC_TINY=m
CONFIG_SPI_PCI1XXXX=m
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
CONFIG_SPI_SC18IS602=m
CONFIG_SPI_SIFIVE=m
CONFIG_SPI_MXIC=m
CONFIG_SPI_VIRTIO=m
CONFIG_SPI_XCOMM=m
CONFIG_SPI_XILINX=m
CONFIG_SPI_ZYNQMP_GQSPI=m
CONFIG_SPI_AMD=m
#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=m
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=m
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=m
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=m
CONFIG_SPI_DYNAMIC=y
#
# SPI Offload triggers
#
CONFIG_SPI_OFFLOAD_TRIGGER_ADI_UTIL_SD=m
CONFIG_SPI_OFFLOAD_TRIGGER_PWM=m
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
CONFIG_PPS_GENERATOR=m
# CONFIG_PPS_GENERATOR_DUMMY is not set
CONFIG_PPS_GENERATOR_TIO=m
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_PTP_1588_CLOCK_OPTIONAL=m
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_INES=m
CONFIG_PTP_1588_CLOCK_KVM=m
CONFIG_PTP_1588_CLOCK_VMCLOCK=m
CONFIG_PTP_1588_CLOCK_IDT82P33=m
CONFIG_PTP_1588_CLOCK_IDTCM=m
CONFIG_PTP_1588_CLOCK_FC3W=m
CONFIG_PTP_1588_CLOCK_MOCK=m
CONFIG_PTP_1588_CLOCK_VMW=m
CONFIG_PTP_1588_CLOCK_OCP=m
CONFIG_PTP_DFL_TOD=m
CONFIG_PTP_NETC_V4_TIMER=m
# end of PTP clock support
#
# DPLL device support
#
CONFIG_DPLL=y
# CONFIG_DPLL_REFCNT_TRACKER is not set
CONFIG_ZL3073X=m
CONFIG_ZL3073X_I2C=m
CONFIG_ZL3073X_SPI=m
# end of DPLL device support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_AMDISP=m
CONFIG_PINCTRL_CY8C95X0=m
CONFIG_PINCTRL_DA9062=m
CONFIG_PINCTRL_MAX7360=m
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08_SPI=m
CONFIG_PINCTRL_MCP23S08=m
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_UPBOARD=m
CONFIG_PINCTRL_CS42L43=m
CONFIG_PINCTRL_MADERA=m
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_PINCTRL_CS47L92=y
#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_LYNXPOINT=m
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_INTEL_PLATFORM=m
CONFIG_PINCTRL_ALDERLAKE=m
CONFIG_PINCTRL_BROXTON=m
CONFIG_PINCTRL_CANNONLAKE=m
CONFIG_PINCTRL_CEDARFORK=m
CONFIG_PINCTRL_DENVERTON=m
CONFIG_PINCTRL_ELKHARTLAKE=m
CONFIG_PINCTRL_EMMITSBURG=m
CONFIG_PINCTRL_GEMINILAKE=m
CONFIG_PINCTRL_ICELAKE=m
CONFIG_PINCTRL_JASPERLAKE=m
CONFIG_PINCTRL_LAKEFIELD=m
CONFIG_PINCTRL_LEWISBURG=m
CONFIG_PINCTRL_METEORLAKE=m
CONFIG_PINCTRL_METEORPOINT=m
CONFIG_PINCTRL_SUNRISEPOINT=m
CONFIG_PINCTRL_TIGERLAKE=m
# end of Intel pinctrl drivers
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_GPIOLIB_LEGACY=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=m
CONFIG_GPIO_REGMAP=m
CONFIG_GPIO_SWNODE_UNDEFINED=y
CONFIG_GPIO_MAX730X=m
CONFIG_GPIO_IDIO_16=m
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_ALTERA=m
CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_BY_PINCTRL is not set
CONFIG_GPIO_DWAPB=m
CONFIG_GPIO_EXAR=m
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_GRANITERAPIDS=m
CONFIG_GPIO_ICH=m
CONFIG_GPIO_MB86S7X=m
CONFIG_GPIO_MENZ127=m
# CONFIG_GPIO_POLARFIRE_SOC is not set
CONFIG_GPIO_SIOX=m
CONFIG_GPIO_TANGIER=m
# CONFIG_GPIO_WAVESHARE_DSI_TOUCH is not set
# CONFIG_GPIO_WCD934X is not set
CONFIG_GPIO_XILINX=m
CONFIG_GPIO_AMD_FCH=m
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_VX855=m
CONFIG_GPIO_F7188X=m
CONFIG_GPIO_IT87=m
CONFIG_GPIO_SCH=m
# CONFIG_GPIO_NOVALAKE is not set
CONFIG_GPIO_SCH311X=m
CONFIG_GPIO_WINBOND=m
CONFIG_GPIO_WS16C48=m
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_FXL6408=m
CONFIG_GPIO_DS4520=m
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_TPIC2810=m
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=m
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_CGBC=m
CONFIG_GPIO_CROS_EC=m
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_DA9052=m
CONFIG_GPIO_DA9055=m
CONFIG_GPIO_DLN2=m
CONFIG_GPIO_ELKHARTLAKE=m
CONFIG_GPIO_JANZ_TTL=m
CONFIG_GPIO_KEMPLD=m
CONFIG_GPIO_LJCA=m
CONFIG_GPIO_LP3943=m
CONFIG_GPIO_LP873X=m
CONFIG_GPIO_MADERA=m
CONFIG_GPIO_MAX7360=m
CONFIG_GPIO_NCT6694=m
CONFIG_GPIO_PALMAS=m
CONFIG_GPIO_QIXIS_FPGA=m
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_TPS65086=m
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=m
CONFIG_GPIO_TPS68470=m
CONFIG_GPIO_TQMX86=m
CONFIG_GPIO_TWL4030=m
CONFIG_GPIO_TWL6040=m
CONFIG_GPIO_WHISKEY_COVE=m
CONFIG_GPIO_WM831X=m
CONFIG_GPIO_WM8350=m
CONFIG_GPIO_WM8994=m
# end of MFD GPIO expanders
#
# Auxiliary Bus GPIO drivers
#
# end of Auxiliary Bus GPIO drivers
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=m
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_PCI_IDIO_16=m
CONFIG_GPIO_PCIE_IDIO_24=m
CONFIG_GPIO_RDC321X=m
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=m
CONFIG_GPIO_MAX3191X=m
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MC33880=m
CONFIG_GPIO_PISOSR=m
CONFIG_GPIO_XRA1403=m
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
CONFIG_GPIO_MPSSE=m
CONFIG_GPIO_USBIO=m
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=m
CONFIG_GPIO_LATCH=m
CONFIG_GPIO_MOCKUP=m
CONFIG_GPIO_VIRTIO=m
CONFIG_GPIO_SIM=m
# end of Virtual GPIO drivers
#
# GPIO Debugging utilities
#
# CONFIG_GPIO_VIRTUSER is not set
# end of GPIO Debugging utilities
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_AMD_AXI=m
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_GPIO=m
CONFIG_W1_MASTER_SGI=m
CONFIG_W1_MASTER_UART=m
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=m
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=m
CONFIG_W1_SLAVE_DS2430=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS250X=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_ATC260X=m
CONFIG_POWER_RESET_MT6323=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_TPS65086=y
# CONFIG_POWER_RESET_QEMU_VIRT_CTRL is not set
CONFIG_POWER_SEQUENCING=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_ADC_BATTERY_HELPER=m
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_IP5XXX_POWER=m
CONFIG_MAX8925_POWER=m
CONFIG_WM831X_BACKUP=m
CONFIG_WM831X_POWER=m
CONFIG_WM8350_POWER=m
CONFIG_TEST_POWER=m
CONFIG_BATTERY_88PM860X=m
CONFIG_CHARGER_ADP5061=m
CONFIG_BATTERY_CHAGALL=m
CONFIG_BATTERY_CW2015=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_S2MU005 is not set
CONFIG_BATTERY_INTEL_DC_TI=m
CONFIG_BATTERY_SBS=m
CONFIG_CHARGER_SBS=m
CONFIG_MANAGER_SBS=m
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
CONFIG_BATTERY_BQ27XXX_HDQ=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_BATTERY_DA9030=m
CONFIG_BATTERY_DA9052=m
CONFIG_CHARGER_DA9150=m
CONFIG_BATTERY_DA9150=m
CONFIG_CHARGER_AXP20X=m
CONFIG_BATTERY_AXP20X=m
CONFIG_AXP20X_POWER=m
CONFIG_AXP288_CHARGER=m
CONFIG_AXP288_FUEL_GAUGE=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_BATTERY_MAX1720X=m
CONFIG_BATTERY_MAX1721X=m
CONFIG_BATTERY_TWL4030_MADC=m
CONFIG_CHARGER_88PM860X=m
CONFIG_BATTERY_RX51=m
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_TWL4030=m
CONFIG_CHARGER_TWL6030=m
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_LP8788=m
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_MANAGER=m
CONFIG_CHARGER_LT3651=m
CONFIG_CHARGER_LTC4162L=m
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_MAX77705=m
CONFIG_CHARGER_MAX77976=m
CONFIG_CHARGER_MAX8971=m
CONFIG_CHARGER_MAX8997=m
CONFIG_CHARGER_MAX8998=m
CONFIG_CHARGER_MP2629=m
CONFIG_CHARGER_MT6360=m
CONFIG_CHARGER_MT6370=m
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24257=m
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ2515X=m
CONFIG_CHARGER_BQ257XX=m
CONFIG_CHARGER_BQ25890=m
CONFIG_CHARGER_BQ25980=m
# CONFIG_CHARGER_BQ25630 is not set
CONFIG_CHARGER_BQ256XX=m
# CONFIG_CHARGER_SGM41542 is not set
CONFIG_CHARGER_SMB347=m
CONFIG_CHARGER_TPS65090=m
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_BATTERY_GOLDFISH=m
CONFIG_BATTERY_RT5033=m
CONFIG_CHARGER_RT5033=m
CONFIG_CHARGER_RT9455=m
CONFIG_CHARGER_RT9467=m
CONFIG_CHARGER_RT9471=m
CONFIG_CHARGER_RT9756=m
CONFIG_CHARGER_CROS_USBPD=m
CONFIG_CHARGER_CROS_PCHG=m
CONFIG_CHARGER_CROS_CONTROL=m
CONFIG_FUEL_GAUGE_STC3117=m
CONFIG_CHARGER_BD99954=m
CONFIG_CHARGER_WILCO=m
CONFIG_BATTERY_SURFACE=m
CONFIG_CHARGER_SURFACE=m
CONFIG_BATTERY_UG3105=m
# CONFIG_BATTERY_CHARGER_SURFACE_RT is not set
CONFIG_FUEL_GAUGE_MM8013=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_SMPRO=m
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM1177=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_AHT10=m
CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=m
CONFIG_SENSORS_AS370=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_ASUS_ROG_RYUJIN=m
CONFIG_SENSORS_AXI_FAN_CONTROL=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_KB9002 is not set
CONFIG_SENSORS_KBATT=m
CONFIG_SENSORS_KFAN=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_SENSORS_ARCTIC_FAN_CONTROLLER is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_CGBC=m
CONFIG_SENSORS_CHIPCAP2=m
CONFIG_SENSORS_CORSAIR_CPRO=m
CONFIG_SENSORS_CORSAIR_PSU=m
CONFIG_SENSORS_CROS_EC=m
CONFIG_SENSORS_DRIVETEMP=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_I8K=y
CONFIG_SENSORS_DA9052_ADC=m
CONFIG_SENSORS_DA9055=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_FTSTEUTATES=m
CONFIG_SENSORS_GIGABYTE_WATERFORCE=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_GPD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_HS3001=m
CONFIG_SENSORS_HTU31=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_ISL28022=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_POWERZ=m
CONFIG_SENSORS_POWR1220=m
# CONFIG_SENSORS_PROM21_XHCI is not set
# CONFIG_SENSORS_LATTEPANDA_SIGMA_EC is not set
CONFIG_SENSORS_LENOVO_EC=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
CONFIG_SENSORS_LTC2947_SPI=m
CONFIG_SENSORS_LTC2990=m
CONFIG_SENSORS_LTC2991=m
CONFIG_SENSORS_LTC2992=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LTC4282=m
# CONFIG_SENSORS_LTC4283 is not set
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX127=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX31722=m
CONFIG_SENSORS_MAX31730=m
CONFIG_SENSORS_MAX31760=m
CONFIG_MAX31827=m
CONFIG_SENSORS_MAX6620=m
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MAX77705=m
CONFIG_SENSORS_MC34VR500=m
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MCP9982 is not set
CONFIG_SENSORS_MLXREG_FAN=m
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_TPS23861=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_MR75203=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6694=m
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT6775_I2C=m
CONFIG_SENSORS_NCT7363=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
CONFIG_SENSORS_NPCM7XX=m
CONFIG_SENSORS_NZXT_KRAKEN2=m
CONFIG_SENSORS_NZXT_KRAKEN3=m
CONFIG_SENSORS_NZXT_SMART2=m
CONFIG_SENSORS_OCC_P8_I2C=m
CONFIG_SENSORS_OCC=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ACBEL_FSG032=m
CONFIG_SENSORS_ADM1266=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_ADP1050=m
CONFIG_SENSORS_ADP1050_REGULATOR=y
# CONFIG_SENSORS_APS_379 is not set
CONFIG_SENSORS_BEL_PFE=m
CONFIG_SENSORS_BPA_RS600=m
CONFIG_SENSORS_CRPS=m
# CONFIG_SENSORS_D1U74T is not set
CONFIG_SENSORS_DELTA_AHE50DC_FAN=m
CONFIG_SENSORS_FSP_3Y=m
CONFIG_SENSORS_HAC300S=m
CONFIG_SENSORS_IBM_CFFPS=m
CONFIG_SENSORS_DPS920AB=m
# CONFIG_SENSORS_E50SN12051 is not set
CONFIG_SENSORS_INA233=m
CONFIG_SENSORS_INSPUR_IPSPS=m
CONFIG_SENSORS_IR35221=m
CONFIG_SENSORS_IR36021=m
CONFIG_SENSORS_IR38064=m
CONFIG_SENSORS_IR38064_REGULATOR=y
CONFIG_SENSORS_IRPS5401=m
CONFIG_SENSORS_ISL68137=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LM25066_REGULATOR=y
CONFIG_SENSORS_LT3074=m
CONFIG_SENSORS_LT3074_REGULATOR=m
CONFIG_SENSORS_LT7182S=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC2978_REGULATOR is not set
CONFIG_SENSORS_LTC3815=m
CONFIG_SENSORS_LTC4286=y
# CONFIG_SENSORS_LX1308 is not set
CONFIG_SENSORS_MAX15301=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX16601=m
CONFIG_SENSORS_MAX17616=m
CONFIG_SENSORS_MAX20730=m
CONFIG_SENSORS_MAX20751=m
# CONFIG_SENSORS_MAX20830 is not set
# CONFIG_SENSORS_MAX20860A is not set
CONFIG_SENSORS_MAX31785=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_MP2856=m
CONFIG_SENSORS_MP2869=m
CONFIG_SENSORS_MP2888=m
CONFIG_SENSORS_MP2891=m
CONFIG_SENSORS_MP2925=m
CONFIG_SENSORS_MP29502=m
CONFIG_SENSORS_MP2975=m
# CONFIG_SENSORS_MP2985 is not set
CONFIG_SENSORS_MP2993=m
CONFIG_SENSORS_MP2975_REGULATOR=y
CONFIG_SENSORS_MP5023=m
CONFIG_SENSORS_MP5920=m
CONFIG_SENSORS_MP5926=m
CONFIG_SENSORS_MP5990=m
CONFIG_SENSORS_MP9941=m
CONFIG_SENSORS_MP9945=m
CONFIG_SENSORS_MPQ7932_REGULATOR=y
CONFIG_SENSORS_MPQ7932=m
# CONFIG_SENSORS_MPQ82D00 is not set
CONFIG_SENSORS_MPQ8785=m
# CONFIG_SENSORS_MPQ8646 is not set
CONFIG_SENSORS_PIM4328=m
CONFIG_SENSORS_PLI1209BC=m
CONFIG_SENSORS_PLI1209BC_REGULATOR=y
CONFIG_SENSORS_PM6764TR=m
CONFIG_SENSORS_PXE1610=m
CONFIG_SENSORS_Q54SJ108A2=m
CONFIG_SENSORS_STEF48H28=m
# CONFIG_SENSORS_SQ24860 is not set
CONFIG_SENSORS_STPDDC60=m
CONFIG_SENSORS_TDA38640=m
CONFIG_SENSORS_TDA38640_REGULATOR=y
CONFIG_SENSORS_TPS25990=m
CONFIG_SENSORS_TPS25990_REGULATOR=y
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_TPS53679=m
CONFIG_SENSORS_TPS546D24=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_VT7505 is not set
CONFIG_SENSORS_XDP710=m
# CONFIG_SENSORS_XDP720 is not set
CONFIG_SENSORS_XDPE152=m
# CONFIG_SENSORS_XDPE1A2G7B is not set
CONFIG_SENSORS_XDPE122=m
CONFIG_SENSORS_XDPE122_REGULATOR=y
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_PT5161L=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_QNAP_MCU_HWMON=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
CONFIG_SENSORS_SHT4x=m
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SY7636A=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC1812 is not set
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC2305=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_STTS751=m
CONFIG_SENSORS_SURFACE_FAN=m
CONFIG_SENSORS_SURFACE_TEMP=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA238=m
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_SPD5118=m
CONFIG_SENSORS_SPD5118_DETECT=y
CONFIG_SENSORS_TC74=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_TMP464=m
CONFIG_SENSORS_TMP513=m
CONFIG_SENSORS_TSC1641=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83773G=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_WM8350=m
CONFIG_SENSORS_XGENE=m
# CONFIG_SENSORS_YOGAFAN is not set
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=m
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_ASUS_WMI=m
CONFIG_SENSORS_ASUS_EC=m
CONFIG_SENSORS_HP_WMI=m
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
# CONFIG_THERMAL_STATISTICS is not set
# CONFIG_THERMAL_DEBUGFS is not set
CONFIG_THERMAL_CORE_TESTING=m
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=100
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_DEFAULT_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_DEVFREQ_THERMAL=y
# CONFIG_PCIE_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_INTEL_TCC=y
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
CONFIG_INTEL_SOC_DTS_THERMAL=m
#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
CONFIG_INT3406_THERMAL=m
CONFIG_PROC_THERMAL_MMIO_RAPL=m
# end of ACPI INT340X thermal drivers
CONFIG_INTEL_BXT_PMIC_THERMAL=m
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_INTEL_TCC_COOLING=m
CONFIG_INTEL_HFI_THERMAL=y
# end of Intel thermal drivers
CONFIG_GENERIC_ADC_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set
#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_DUMP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_DUMP is not set
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_SOFT_WATCHDOG_PRETIMEOUT is not set
CONFIG_CROS_EC_WATCHDOG=m
CONFIG_DA9052_WATCHDOG=m
CONFIG_DA9055_WATCHDOG=m
CONFIG_DA9063_WATCHDOG=m
CONFIG_DA9062_WATCHDOG=m
# CONFIG_GPIO_WATCHDOG is not set
CONFIG_LENOVO_SE10_WDT=m
CONFIG_LENOVO_SE30_WDT=m
# CONFIG_LENOVO_SE30G2_SE60_WDT is not set
CONFIG_MENF21BMC_WATCHDOG=m
CONFIG_MENZ069_WATCHDOG=m
CONFIG_WDAT_WDT=m
CONFIG_WM831X_WATCHDOG=m
CONFIG_WM8350_WATCHDOG=m
CONFIG_XILINX_WATCHDOG=m
CONFIG_ZIIRAVE_WATCHDOG=m
CONFIG_RAVE_SP_WATCHDOG=m
CONFIG_MLX_WDT=m
CONFIG_CADENCE_WATCHDOG=m
CONFIG_DW_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
CONFIG_MAX63XX_WATCHDOG=m
CONFIG_NCT6694_WATCHDOG=m
CONFIG_RETU_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ADVANTECH_EC_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_CGBC_WDT=m
CONFIG_EBC_C384_WDT=m
CONFIG_EXAR_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_IE6XX_WDT=m
CONFIG_INTEL_OC_WATCHDOG=m
CONFIG_ITCO_WDT=m
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_KEMPLD_WDT=m
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_NV_TCO=m
CONFIG_60XX_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_TQMX86_WDT=m
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
CONFIG_INTEL_MEI_WDT=m
CONFIG_NI903X_WDT=m
CONFIG_NIC7018_WDT=m
CONFIG_SIEMENS_SIMATIC_IPC_WDT=m
CONFIG_MEN_A21_WDT=m
CONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_SMPRO=m
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_BD9571MWV=m
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
CONFIG_MFD_CGBC=m
CONFIG_MFD_CROS_EC_DEV=m
CONFIG_MFD_CS40L50_CORE=m
CONFIG_MFD_CS40L50_I2C=m
CONFIG_MFD_CS40L50_SPI=m
CONFIG_MFD_CS42L43=m
CONFIG_MFD_CS42L43_I2C=m
CONFIG_MFD_CS42L43_SDW=m
CONFIG_MFD_MADERA=m
CONFIG_MFD_MADERA_I2C=m
CONFIG_MFD_MADERA_SPI=m
CONFIG_MFD_CS47L15=y
CONFIG_MFD_CS47L35=y
CONFIG_MFD_CS47L85=y
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=y
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=m
CONFIG_MFD_DA9063=m
CONFIG_MFD_DA9150=m
CONFIG_MFD_DLN2=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_SPI=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_MFD_MP2629=m
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
CONFIG_INTEL_SOC_PMIC=y
CONFIG_INTEL_SOC_PMIC_BXTWC=m
CONFIG_INTEL_SOC_PMIC_CHTWC=y
CONFIG_INTEL_SOC_PMIC_CHTDC_TI=m
CONFIG_INTEL_SOC_PMIC_MRFLD=m
CONFIG_MFD_INTEL_LPSS=m
CONFIG_MFD_INTEL_LPSS_ACPI=m
CONFIG_MFD_INTEL_LPSS_PCI=m
CONFIG_MFD_INTEL_PMC_BXT=m
CONFIG_MFD_IQS62X=m
CONFIG_MFD_JANZ_CMODIO=m
CONFIG_MFD_KEMPLD=m
CONFIG_MFD_88PM800=m
CONFIG_MFD_88PM805=m
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX5970=m
CONFIG_MFD_MAX14577=m
CONFIG_MFD_MAX77541=m
CONFIG_MFD_MAX77693=m
CONFIG_MFD_MAX77705=m
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=m
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6360=m
CONFIG_MFD_MT6370=m
CONFIG_MFD_MT6397=m
CONFIG_MFD_MENF21BMC=m
CONFIG_MFD_NCT6694=m
CONFIG_MFD_OCELOT=m
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_RETU=m
CONFIG_MFD_SY7636A=m
CONFIG_MFD_RDC321X=m
CONFIG_MFD_RT4831=m
CONFIG_MFD_RT5033=m
CONFIG_MFD_RT5120=m
CONFIG_MFD_RC5T583=y
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SIMPLE_MFD_I2C=m
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=m
CONFIG_MFD_SYSCON=y
CONFIG_MFD_LP3943=m
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=m
CONFIG_MFD_BQ257XX=m
CONFIG_MFD_PALMAS=m
CONFIG_TPS6105X=m
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65086=m
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=m
CONFIG_MFD_TPS65912_I2C=m
CONFIG_MFD_TPS65912_SPI=m
CONFIG_MFD_TPS6594=m
CONFIG_MFD_TPS6594_I2C=m
CONFIG_MFD_TPS6594_SPI=m
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_LM3533=m
CONFIG_MFD_TQMX86=m
CONFIG_MFD_VX855=m
CONFIG_MFD_ARIZONA=m
CONFIG_MFD_ARIZONA_I2C=m
CONFIG_MFD_ARIZONA_SPI=m
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=m
CONFIG_MFD_WCD934X=m
CONFIG_MFD_ATC260X=m
CONFIG_MFD_ATC260X_I2C=m
CONFIG_RAVE_SP_CORE=m
CONFIG_MFD_INTEL_M10_BMC_CORE=m
CONFIG_MFD_INTEL_M10_BMC_SPI=m
CONFIG_MFD_INTEL_M10_BMC_PMCI=m
CONFIG_MFD_QNAP_MCU=m
CONFIG_MFD_UPBOARD_FPGA=m
CONFIG_MFD_MAX7360=m
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_NETLINK_EVENTS=y
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM800=m
CONFIG_REGULATOR_88PM8607=m
CONFIG_REGULATOR_ACT8865=m
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_ADP5055=m
CONFIG_REGULATOR_AAT2870=m
CONFIG_REGULATOR_ARIZONA_LDO1=m
CONFIG_REGULATOR_ARIZONA_MICSUPP=m
CONFIG_REGULATOR_AS3711=m
CONFIG_REGULATOR_ATC260X=m
CONFIG_REGULATOR_AW37503=m
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_BD9571MWV=m
CONFIG_REGULATOR_BQ257XX=m
# CONFIG_REGULATOR_DA903X is not set
CONFIG_REGULATOR_DA9052=m
CONFIG_REGULATOR_DA9055=m
CONFIG_REGULATOR_DA9062=m
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=m
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_GPIO=m
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_FP9931=m
CONFIG_REGULATOR_LM363X=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=m
CONFIG_REGULATOR_LP8755=m
CONFIG_REGULATOR_LP8788=m
CONFIG_REGULATOR_LTC3589=m
CONFIG_REGULATOR_LTC3676=m
CONFIG_REGULATOR_MAX14577=m
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX77503=m
CONFIG_REGULATOR_MAX77541=m
CONFIG_REGULATOR_MAX77857=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8893=m
CONFIG_REGULATOR_MAX8907=m
CONFIG_REGULATOR_MAX8925=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8997=m
CONFIG_REGULATOR_MAX8998=m
CONFIG_REGULATOR_MAX20086=m
CONFIG_REGULATOR_MAX20411=m
CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_MAX77826=m
CONFIG_REGULATOR_MAX77838=m
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MP8859=m
CONFIG_REGULATOR_MT6311=m
CONFIG_REGULATOR_MT6323=m
CONFIG_REGULATOR_MT6331=m
CONFIG_REGULATOR_MT6332=m
CONFIG_REGULATOR_MT6357=m
CONFIG_REGULATOR_MT6358=m
CONFIG_REGULATOR_MT6359=m
CONFIG_REGULATOR_MT6360=m
CONFIG_REGULATOR_MT6370=m
CONFIG_REGULATOR_MT6397=m
CONFIG_REGULATOR_PALMAS=m
CONFIG_REGULATOR_PCA9450=m
CONFIG_REGULATOR_PF9453=m
CONFIG_REGULATOR_PF0900=m
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=m
CONFIG_REGULATOR_PV88090=m
CONFIG_REGULATOR_PWM=m
CONFIG_REGULATOR_RAA215300=m
CONFIG_REGULATOR_RC5T583=m
CONFIG_REGULATOR_RT4801=m
CONFIG_REGULATOR_RT4803=m
CONFIG_REGULATOR_RT4831=m
CONFIG_REGULATOR_RT5033=m
CONFIG_REGULATOR_RT5120=m
CONFIG_REGULATOR_RT5190A=m
CONFIG_REGULATOR_RT5739=m
CONFIG_REGULATOR_RT5759=m
CONFIG_REGULATOR_RT6160=m
CONFIG_REGULATOR_RT6190=m
CONFIG_REGULATOR_RT6245=m
CONFIG_REGULATOR_RT8092=m
CONFIG_REGULATOR_RTQ2134=m
CONFIG_REGULATOR_RTMV20=m
CONFIG_REGULATOR_RTQ6752=m
CONFIG_REGULATOR_RTQ2208=m
CONFIG_REGULATOR_SKY81452=m
CONFIG_REGULATOR_SLG51000=m
CONFIG_REGULATOR_SY7636A=m
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_TPS65086=m
CONFIG_REGULATOR_TPS65090=m
CONFIG_REGULATOR_TPS65132=m
CONFIG_REGULATOR_TPS65185=m
CONFIG_REGULATOR_TPS6524X=m
CONFIG_REGULATOR_TPS6586X=m
CONFIG_REGULATOR_TPS65910=m
CONFIG_REGULATOR_TPS65912=m
CONFIG_REGULATOR_TPS68470=m
CONFIG_REGULATOR_TWL4030=m
CONFIG_REGULATOR_WM831X=m
CONFIG_REGULATOR_WM8350=m
CONFIG_REGULATOR_WM8400=m
CONFIG_REGULATOR_WM8994=m
CONFIG_RC_CORE=y
CONFIG_BPF_LIRC_MODE2=y
CONFIG_LIRC=y
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_RCMM_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=m
CONFIG_IR_FINTEK=m
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
CONFIG_IR_IMON=m
CONFIG_IR_IMON_RAW=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_STREAMZAP=m
CONFIG_IR_TOY=m
CONFIG_IR_TTUSBIR=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_RC_ATI_REMOTE=m
CONFIG_RC_LOOPBACK=m
CONFIG_RC_XBOX_DVD=m
CONFIG_CEC_CORE=m
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y
#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
# CONFIG_CEC_PIN_ERROR_INJ is not set
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=m
CONFIG_CEC_NXP_TDA9950=m
CONFIG_CEC_CROS_EC=m
CONFIG_CEC_GPIO=m
CONFIG_CEC_SECO=m
CONFIG_CEC_SECO_RC=y
CONFIG_USB_EXTRON_DA_HD_4K_PLUS_CEC=m
CONFIG_USB_PULSE8_CEC=m
CONFIG_USB_RAINSHADOW_CEC=m
# end of CEC support
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FLASH_LED_CLASS=m
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
CONFIG_V4L2_CCI=m
CONFIG_V4L2_CCI_I2C=m
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
# end of Media controller options
#
# Digital TV options
#
CONFIG_DVB_MMAP=y
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options
#
# Media drivers
#
#
# Drivers filtered as selected at 'Filter media drivers'
#
#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_GSPCA=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_DTCS033=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_GL860=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
#
# Analog TV USB devices
#
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_STK1160=m
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
#
# Digital TV USB devices
#
CONFIG_DVB_AS102=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_ZD1301=m
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_CXUSB_ANALOG=y
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_VP7045=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
# CONFIG_VIDEO_HWS is not set
CONFIG_VIDEO_MGB4=m
CONFIG_VIDEO_SOLO6X10=m
CONFIG_VIDEO_TW5864=m
CONFIG_VIDEO_TW68=m
CONFIG_VIDEO_TW686X=m
# CONFIG_VIDEO_ZORAN is not set
#
# Media capture/analog TV support
#
CONFIG_VIDEO_DT3155=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_IVTV_ALSA=m
# CONFIG_VIDEO_FB_IVTV is not set
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7134_GO7007=m
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
CONFIG_DVB_DM1105=m
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NETUP_UNIDVB=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_PT1=m
CONFIG_DVB_PT3=m
CONFIG_DVB_SMIPCIE=m
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_VIDEO_IPU3_CIO2=m
CONFIG_VIDEO_INTEL_IPU6=m
CONFIG_INTEL_VSC=m
CONFIG_IPU_BRIDGE=m
CONFIG_RADIO_ADAPTERS=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_RADIO_SI4713=m
CONFIG_RADIO_SI476X=m
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_TEF6862=m
CONFIG_USB_DSBR=m
CONFIG_USB_KEENE=m
CONFIG_USB_MA901=m
CONFIG_USB_MR800=m
CONFIG_USB_RAREMONO=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
#
# Allegro DVT media platform drivers
#
# CONFIG_VIDEO_AMD_ISP4_CAPTURE is not set
#
# Amlogic media platform drivers
#
#
# Amphion drivers
#
#
# ARM media platform drivers
#
#
# Aspeed media platform drivers
#
#
# Atmel media platform drivers
#
#
# Cadence media platform drivers
#
CONFIG_VIDEO_CADENCE_CSI2RX=m
CONFIG_VIDEO_CADENCE_CSI2TX=m
#
# Chips&Media media platform drivers
#
#
# Intel media platform drivers
#
#
# Marvell media platform drivers
#
CONFIG_VIDEO_CAFE_CCIC=m
#
# Mediatek media platform drivers
#
#
# Microchip Technology, Inc. media platform drivers
#
#
# Nuvoton media platform drivers
#
#
# NVidia media platform drivers
#
#
# NXP media platform drivers
#
#
# Qualcomm media platform drivers
#
#
# Raspberry Pi media platform drivers
#
CONFIG_VIDEO_RP1_CFE=m
#
# Renesas media platform drivers
#
#
# Rockchip media platform drivers
#
#
# Samsung media platform drivers
#
#
# STMicroelectronics media platform drivers
#
#
# Sunxi media platform drivers
#
#
# Texas Instruments drivers
#
#
# Verisilicon media platform drivers
#
#
# VIA media platform drivers
#
#
# Xilinx media platform drivers
#
#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIM2M=m
CONFIG_VIDEO_VICODEC=m
CONFIG_VIDEO_VIMC=m
CONFIG_VIDEO_VIVID=m
CONFIG_VIDEO_VIVID_CEC=y
CONFIG_VIDEO_VIVID_OSD=y
CONFIG_VIDEO_VIVID_MAX_DEVS=64
CONFIG_VIDEO_VISL=m
# CONFIG_VISL_DEBUGFS is not set
CONFIG_DVB_TEST_DRIVERS=y
CONFIG_DVB_VIDTV=m
#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_TTPCI_EEPROM=m
CONFIG_UVC_COMMON=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set
CONFIG_VIDEO_V4L2_TPG=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
# end of Media drivers
CONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV=y
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_CAMERA_SENSOR=y
CONFIG_VIDEO_APTINA_PLL=m
CONFIG_VIDEO_CCS_PLL=m
CONFIG_VIDEO_ALVIUM_CSI2=m
CONFIG_VIDEO_AR0521=m
CONFIG_VIDEO_GC0308=m
CONFIG_VIDEO_GC0310=m
CONFIG_VIDEO_GC05A2=m
CONFIG_VIDEO_GC08A3=m
CONFIG_VIDEO_GC2145=m
CONFIG_VIDEO_HI556=m
CONFIG_VIDEO_HI846=m
CONFIG_VIDEO_HI847=m
CONFIG_VIDEO_IMX111=m
CONFIG_VIDEO_IMX208=m
CONFIG_VIDEO_IMX214=m
CONFIG_VIDEO_IMX219=m
CONFIG_VIDEO_IMX258=m
CONFIG_VIDEO_IMX274=m
CONFIG_VIDEO_IMX283=m
CONFIG_VIDEO_IMX290=m
CONFIG_VIDEO_IMX296=m
CONFIG_VIDEO_IMX319=m
CONFIG_VIDEO_IMX355=m
# CONFIG_VIDEO_IMX471 is not set
# CONFIG_VIDEO_IMX678 is not set
CONFIG_VIDEO_MAX9271_LIB=m
CONFIG_VIDEO_MT9M001=m
CONFIG_VIDEO_MT9M111=m
CONFIG_VIDEO_MT9M114=m
CONFIG_VIDEO_MT9P031=m
CONFIG_VIDEO_MT9T112=m
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_MT9V111=m
CONFIG_VIDEO_OG01A1B=m
CONFIG_VIDEO_OG0VE1B=m
CONFIG_VIDEO_OS05B10=m
CONFIG_VIDEO_OV01A10=m
CONFIG_VIDEO_OV02A10=m
CONFIG_VIDEO_OV02E10=m
CONFIG_VIDEO_OV02C10=m
CONFIG_VIDEO_OV08D10=m
CONFIG_VIDEO_OV08X40=m
CONFIG_VIDEO_OV13858=m
CONFIG_VIDEO_OV13B10=m
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV2659=m
CONFIG_VIDEO_OV2680=m
CONFIG_VIDEO_OV2685=m
CONFIG_VIDEO_OV2735=m
CONFIG_VIDEO_OV2740=m
CONFIG_VIDEO_OV4689=m
CONFIG_VIDEO_OV5647=m
CONFIG_VIDEO_OV5648=m
CONFIG_VIDEO_OV5670=m
CONFIG_VIDEO_OV5675=m
CONFIG_VIDEO_OV5693=m
CONFIG_VIDEO_OV5695=m
CONFIG_VIDEO_OV6211=m
CONFIG_VIDEO_OV64A40=m
CONFIG_VIDEO_OV7251=m
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_OV772X=m
CONFIG_VIDEO_OV7740=m
CONFIG_VIDEO_OV8856=m
CONFIG_VIDEO_OV8858=m
CONFIG_VIDEO_OV8865=m
CONFIG_VIDEO_OV9640=m
CONFIG_VIDEO_OV9650=m
CONFIG_VIDEO_OV9734=m
CONFIG_VIDEO_RDACM20=m
CONFIG_VIDEO_RDACM21=m
CONFIG_VIDEO_RJ54N1=m
CONFIG_VIDEO_S5C73M3=m
CONFIG_VIDEO_S5K3M5=m
CONFIG_VIDEO_S5K5BAF=m
CONFIG_VIDEO_S5K6A3=m
CONFIG_VIDEO_S5KJN1=m
# CONFIG_VIDEO_T4KA3 is not set
CONFIG_VIDEO_VD55G1=m
CONFIG_VIDEO_VD56G3=m
CONFIG_VIDEO_CCS=m
CONFIG_VIDEO_ET8EK8=m
#
# Camera ISPs
#
CONFIG_VIDEO_THP7312=m
# end of Camera ISPs
CONFIG_VIDEO_CAMERA_LENS=y
CONFIG_VIDEO_AD5820=m
CONFIG_VIDEO_AK7375=m
CONFIG_VIDEO_DW9714=m
CONFIG_VIDEO_DW9719=m
CONFIG_VIDEO_DW9768=m
CONFIG_VIDEO_DW9807_VCM=m
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
CONFIG_VIDEO_LM3560=m
CONFIG_VIDEO_LM3646=m
# end of Flash devices
#
# audio, video and radio I2C drivers auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SONY_BTF_MPX=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_SAA6752HS=m
CONFIG_VIDEO_M52790=m
#
# Video serializers and deserializers
#
CONFIG_VIDEO_MAX96717=m
# end of Video serializers and deserializers
#
# SPI I2C drivers auto-selected by 'Autoselect ancillary drivers'
#
#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=m
CONFIG_VIDEO_GS1662=m
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=m
#
# Tuner drivers auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m
#
# DVB Frontend drivers auto-selected by 'Autoselect ancillary drivers'
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_TDA18271C2DD=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_TDA10071=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=m
CONFIG_DVB_AS102_FE=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_EC100=m
CONFIG_DVB_GP8PSK_FE=m
CONFIG_DVB_L64781=m
CONFIG_DVB_MT352=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_ZL10353=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_VES1820=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_MXL692=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
CONFIG_DVB_S921=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_HELENE=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_DRX39XYJ=m
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_SCREEN_INFO=y
CONFIG_VIDEO=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_INTEL_GTT=m
CONFIG_VGA_SWITCHEROO=y
CONFIG_GPU_BUDDY=y
CONFIG_DRM=y
#
# DRM debugging options
#
# CONFIG_DRM_DEBUG_MM is not set
# end of DRM debugging options
CONFIG_DRM_MIPI_DBI=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DRAW=y
CONFIG_DRM_PANIC=y
CONFIG_DRM_PANIC_FOREGROUND_COLOR=0xffffff
CONFIG_DRM_PANIC_BACKGROUND_COLOR=0x0000aa
# CONFIG_DRM_PANIC_DEBUG is not set
CONFIG_DRM_PANIC_SCREEN="kmsg"
# CONFIG_DRM_RAS is not set
CONFIG_DRM_CLIENT=y
CONFIG_DRM_CLIENT_LIB=y
CONFIG_DRM_CLIENT_SELECTION=y
CONFIG_DRM_CLIENT_SETUP=y
#
# Supported DRM clients
#
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_CLIENT_LOG=y
CONFIG_DRM_CLIENT_DEFAULT_FBDEV=y
# CONFIG_DRM_CLIENT_DEFAULT_LOG is not set
CONFIG_DRM_CLIENT_DEFAULT="fbdev"
# end of Supported DRM clients
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_AUX_CEC=y
CONFIG_DRM_DISPLAY_DP_AUX_CHARDEV=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_DP_TUNNEL=y
CONFIG_DRM_DISPLAY_DSC_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_CEC_NOTIFIER_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_TTM=m
CONFIG_DRM_EXEC=m
CONFIG_DRM_GPUVM=m
CONFIG_DRM_GPUSVM=m
CONFIG_DRM_BUDDY=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_DMA_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SUBALLOC_HELPER=m
CONFIG_DRM_SCHED=m
CONFIG_DRM_PANEL_BACKLIGHT_QUIRKS=m
CONFIG_DRM_PRIVACY_SCREEN=y
CONFIG_DRM_AMDGPU=m
CONFIG_DRM_AMDGPU_SI=y
CONFIG_DRM_AMDGPU_CIK=y
CONFIG_DRM_AMDGPU_USERPTR=y
CONFIG_DRM_AMD_ISP=y
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
# end of ACP (Audio CoProcessor) Configuration
#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
CONFIG_DRM_AMD_DC_FP=y
CONFIG_DRM_AMD_DC_SI=y
CONFIG_DRM_AMD_SECURE_DISPLAY=y
# end of Display Engine Configuration
CONFIG_HSA_AMD=y
CONFIG_HSA_AMD_SVM=y
# CONFIG_HSA_AMD_P2P is not set
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_AST=m
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_I2C_NXP_TDA998X=m
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_GMA500=m
CONFIG_DRM_GUD=m
CONFIG_DRM_HISI_HIBMC=m
CONFIG_DRM_HYPERV=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_FORCE_PROBE="*"
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_I915_GVT_KVMGT=m
CONFIG_DRM_I915_PXP=y
CONFIG_DRM_I915_DP_TUNNEL=y
CONFIG_DRM_I915_REQUEST_TIMEOUT=20000
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_PREEMPT_TIMEOUT_COMPUTE=7500
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
CONFIG_DRM_I915_GVT=y
CONFIG_DRM_MGAG200=m
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
# CONFIG_NOUVEAU_DEBUG_PUSH is not set
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_SVM=y
CONFIG_DRM_NOUVEAU_CH7006=m
CONFIG_DRM_NOUVEAU_SIL164=m
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_PANEL_AUO_A030JTN01=m
# CONFIG_DRM_PANEL_FOCALTECH_OTA7290B is not set
CONFIG_DRM_PANEL_ILITEK_ILI9341=m
CONFIG_DRM_PANEL_ORISETECH_OTA5601A=m
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
CONFIG_DRM_PANEL_WIDECHIPS_WS2401=m
# end of Display Panels
CONFIG_DRM_QXL=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_ST7571=m
CONFIG_DRM_ST7571_I2C=m
CONFIG_DRM_ST7571_SPI=m
CONFIG_DRM_ST7586=m
CONFIG_DRM_ST7735R=m
CONFIG_DRM_ST7920=m
CONFIG_DRM_SSD130X=m
CONFIG_DRM_SSD130X_I2C=m
CONFIG_DRM_SSD130X_SPI=m
#
# Drivers for system framebuffers
#
CONFIG_DRM_SYSFB_HELPER=y
# CONFIG_DRM_COREBOOTDRM is not set
CONFIG_DRM_SIMPLEDRM=y
# end of Drivers for system framebuffers
CONFIG_DRM_APPLETBDRM=m
CONFIG_DRM_BOCHS=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_GM12U320=m
CONFIG_DRM_PANEL_MIPI_DBI=m
CONFIG_DRM_PIXPAPER=m
CONFIG_TINYDRM_HX8357D=m
CONFIG_TINYDRM_ILI9163=m
CONFIG_TINYDRM_ILI9225=m
CONFIG_TINYDRM_ILI9341=m
CONFIG_TINYDRM_ILI9486=m
CONFIG_TINYDRM_MI0283QT=m
CONFIG_TINYDRM_REPAPER=m
CONFIG_TINYDRM_SHARP_MEMORY=m
CONFIG_DRM_UDL=m
CONFIG_DRM_VBOXVIDEO=m
CONFIG_DRM_VGEM=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_VIRTIO_GPU_KMS=y
CONFIG_DRM_VKMS=m
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_MKSSTATS=y
CONFIG_DRM_XE=m
CONFIG_DRM_XE_DISPLAY=y
CONFIG_DRM_XE_DP_TUNNEL=y
CONFIG_DRM_XE_GPUSVM=y
CONFIG_DRM_XE_PAGEMAP=y
CONFIG_DRM_XE_FORCE_PROBE=""
CONFIG_DRM_XE_JOB_TIMEOUT_MAX=10000
CONFIG_DRM_XE_JOB_TIMEOUT_MIN=1
CONFIG_DRM_XE_TIMESLICE_MAX=10000000
CONFIG_DRM_XE_TIMESLICE_MIN=1
CONFIG_DRM_XE_PREEMPT_TIMEOUT=640000
CONFIG_DRM_XE_PREEMPT_TIMEOUT_MAX=10000000
CONFIG_DRM_XE_PREEMPT_TIMEOUT_MIN=1
CONFIG_DRM_XE_ENABLE_SCHEDTIMEOUT_LIMIT=y
CONFIG_DRM_XEN=y
CONFIG_DRM_XEN_FRONTEND=m
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=m
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
CONFIG_FB_CORE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DEVICE=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYSMEM_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_DMAMEM_HELPERS=y
CONFIG_FB_DMAMEM_HELPERS_DEFERRED=y
CONFIG_FB_IOMEM_FOPS=y
CONFIG_FB_IOMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
# CONFIG_FB_TILEBLITTING is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI922X=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_AMS369FG06=m
CONFIG_LCD_LMS501KF03=m
CONFIG_LCD_HX8357=m
CONFIG_LCD_OTM3225A=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_AW99706=m
CONFIG_BACKLIGHT_KTD253=m
CONFIG_BACKLIGHT_KTD2801=m
CONFIG_BACKLIGHT_KTZ8866=m
# CONFIG_BACKLIGHT_SY7758 is not set
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_CGBC=m
CONFIG_BACKLIGHT_DA903X=m
CONFIG_BACKLIGHT_DA9052=m
# CONFIG_BACKLIGHT_MAX25014 is not set
CONFIG_BACKLIGHT_MAX8925=m
CONFIG_BACKLIGHT_MT6370=m
CONFIG_BACKLIGHT_APPLE=m
CONFIG_BACKLIGHT_QCOM_WLED=m
CONFIG_BACKLIGHT_RT4831=m
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP5520=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_AAT2870=m
CONFIG_BACKLIGHT_LM3509=m
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_LP8788=m
CONFIG_BACKLIGHT_MP3309C=m
CONFIG_BACKLIGHT_PANDORA=m
CONFIG_BACKLIGHT_SKY81452=m
CONFIG_BACKLIGHT_AS3711=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=m
CONFIG_BACKLIGHT_ARCXCNN=m
CONFIG_BACKLIGHT_RAVE_SP=m
# end of Backlight & LCD device support
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
# CONFIG_FIRMWARE_EDID is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y
# end of Console display driver support
# CONFIG_LOGO is not set
CONFIG_TRACE_GPU_MEM=y
# end of Graphics support
CONFIG_DRM_ACCEL=y
CONFIG_DRM_ACCEL_AMDXDNA=m
CONFIG_DRM_ACCEL_HABANALABS=m
CONFIG_HL_HLDIO=y
CONFIG_DRM_ACCEL_IVPU=m
# CONFIG_DRM_ACCEL_IVPU_DEBUG is not set
CONFIG_DRM_ACCEL_QAIC=m
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_UMP=m
CONFIG_SND_UMP_LEGACY_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_CTL_FAST_LOOKUP=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_CTL_INPUT_VALIDATION=y
# CONFIG_SND_CTL_DEBUG is not set
# CONFIG_SND_JACK_INJECTION_DEBUG is not set
CONFIG_SND_UTIMER=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_CTL_LED=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_SEQ_UMP=y
CONFIG_SND_SEQ_UMP_CLIENT=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_PCMTEST=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=10
CONFIG_SND_SB_COMMON=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=10
# CONFIG_SND_HDA_CTL_DEV_ID is not set
CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_ACPI=m
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_SENARYTECH=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_CM9825=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_REALTEK_LIB=m
CONFIG_SND_HDA_CODEC_ALC260=m
CONFIG_SND_HDA_CODEC_ALC262=m
CONFIG_SND_HDA_CODEC_ALC268=m
CONFIG_SND_HDA_CODEC_ALC269=m
CONFIG_SND_HDA_CODEC_ALC662=m
CONFIG_SND_HDA_CODEC_ALC680=m
CONFIG_SND_HDA_CODEC_ALC861=m
CONFIG_SND_HDA_CODEC_ALC861VD=m
CONFIG_SND_HDA_CODEC_ALC880=m
CONFIG_SND_HDA_CODEC_ALC882=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CS420X=m
CONFIG_SND_HDA_CODEC_CS421X=m
CONFIG_SND_HDA_CODEC_CS8409=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_HDMI_GENERIC=m
CONFIG_SND_HDA_CODEC_HDMI_SIMPLE=m
CONFIG_SND_HDA_CODEC_HDMI_INTEL=m
CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM=y
CONFIG_SND_HDA_CODEC_HDMI_ATI=m
CONFIG_SND_HDA_CODEC_HDMI_NVIDIA=m
CONFIG_SND_HDA_CODEC_HDMI_NVIDIA_MCP=m
CONFIG_SND_HDA_CODEC_HDMI_TEGRA=m
CONFIG_SND_HDA_CIRRUS_SCODEC=m
# CONFIG_SND_HDA_SCODEC_AW88399_I2C is not set
CONFIG_SND_HDA_SCODEC_CS35L41=m
CONFIG_SND_HDA_SCODEC_COMPONENT=m
CONFIG_SND_HDA_SCODEC_CS35L41_I2C=m
CONFIG_SND_HDA_SCODEC_CS35L41_SPI=m
CONFIG_SND_HDA_SCODEC_CS35L56=m
CONFIG_SND_HDA_SCODEC_CS35L56_I2C=m
CONFIG_SND_HDA_SCODEC_CS35L56_SPI=m
#
# CS35L56 driver options
#
# CONFIG_SND_HDA_SCODEC_CS35L56_CAL_DEBUGFS is not set
# end of CS35L56 driver options
CONFIG_SND_HDA_SCODEC_TAS2781=m
CONFIG_SND_HDA_SCODEC_TAS2781_I2C=m
CONFIG_SND_HDA_SCODEC_TAS2781_SPI=m
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_EXT_CORE=m
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=m
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=m
# CONFIG_SND_INTEL_BYT_PREFER_SOF is not set
# end of HD-Audio
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_AUDIO_MIDI_V2=y
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_US144MKII=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_AUDIO_QMI=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_DICE=m
CONFIG_SND_OXFW=m
CONFIG_SND_ISIGHT=m
CONFIG_SND_FIREWORKS=m
CONFIG_SND_BEBOB=m
CONFIG_SND_FIREWIRE_DIGI00X=m
CONFIG_SND_FIREWIRE_TASCAM=m
CONFIG_SND_FIREWIRE_MOTU=m
CONFIG_SND_FIREFACE=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_ACPI=m
CONFIG_SND_SOC_USB=m
#
# Analog Devices
#
CONFIG_SND_SOC_ADI_AXI_I2S=m
CONFIG_SND_SOC_ADI_AXI_SPDIF=m
# end of Analog Devices
#
# AMD
#
CONFIG_SND_SOC_AMD_ACP=m
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m
CONFIG_SND_SOC_AMD_ST_ES8336_MACH=m
CONFIG_SND_SOC_AMD_ACP3x=m
CONFIG_SND_SOC_AMD_RV_RT5682_MACH=m
CONFIG_SND_SOC_AMD_RENOIR=m
CONFIG_SND_SOC_AMD_RENOIR_MACH=m
CONFIG_SND_SOC_AMD_ACP5x=m
CONFIG_SND_SOC_AMD_VANGOGH_MACH=m
CONFIG_SND_SOC_AMD_ACP6x=m
CONFIG_SND_SOC_AMD_YC_MACH=m
CONFIG_SND_AMD_ACP_CONFIG=m
CONFIG_SND_SOC_AMD_ACP_COMMON=m
CONFIG_SND_SOC_ACPI_AMD_MATCH=m
CONFIG_SND_SOC_ACPI_AMD_SDCA_QUIRKS=y
CONFIG_SND_SOC_AMD_ACP_PDM=m
CONFIG_SND_SOC_AMD_ACP_LEGACY_COMMON=m
CONFIG_SND_SOC_AMD_ACP_I2S=m
CONFIG_SND_SOC_AMD_ACPI_MACH=m
CONFIG_SND_SOC_AMD_ACP_PCM=m
CONFIG_SND_SOC_AMD_ACP_PCI=m
CONFIG_SND_AMD_ASOC_RENOIR=m
CONFIG_SND_AMD_ASOC_REMBRANDT=m
CONFIG_SND_AMD_ASOC_ACP63=m
CONFIG_SND_AMD_ASOC_ACP70=m
CONFIG_SND_SOC_AMD_MACH_COMMON=m
CONFIG_SND_SOC_AMD_LEGACY_MACH=m
CONFIG_SND_SOC_AMD_SOF_MACH=m
CONFIG_SND_SOC_AMD_SDW_MACH_COMMON=m
CONFIG_SND_SOC_AMD_SOF_SDW_MACH=m
CONFIG_SND_SOC_AMD_LEGACY_SDW_MACH=m
CONFIG_SND_AMD_SOUNDWIRE_ACPI=m
CONFIG_SND_SOC_AMD_ACP63_TOPLEVEL=m
CONFIG_SND_SOC_AMD_SOUNDWIRE_LINK_BASELINE=m
CONFIG_SND_SOC_AMD_SOUNDWIRE=m
CONFIG_SND_SOC_AMD_PS=m
CONFIG_SND_SOC_AMD_PS_MACH=m
# CONFIG_SND_SOC_AMD_ACP7X is not set
# end of AMD
#
# Apple
#
# end of Apple
#
# Atmel
#
# end of Atmel
#
# Au1x
#
# end of Au1x
#
# Broadcom
#
# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
# end of Broadcom
#
# Cirrus Logic
#
# end of Cirrus Logic
#
# DesignWare
#
CONFIG_SND_DESIGNWARE_I2S=m
CONFIG_SND_DESIGNWARE_PCM=y
# end of DesignWare
#
# Freescale
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
# CONFIG_SND_SOC_FSL_AUDMIX is not set
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
# CONFIG_SND_SOC_FSL_MICFIL is not set
CONFIG_SND_SOC_FSL_XCVR=m
CONFIG_SND_SOC_FSL_UTILS=m
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# end of Freescale
#
# Google
#
CONFIG_SND_SOC_CHV3_I2S=m
# end of Google
#
# Hisilicon
#
CONFIG_SND_I2S_HI6210_I2S=m
# end of Hisilicon
#
# JZ4740
#
# end of JZ4740
#
# Kirkwood
#
# end of Kirkwood
#
# Loongson
#
# end of Loongson
#
# Intel
#
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SOC_INTEL_CATPT=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m
CONFIG_SND_SOC_ACPI_INTEL_MATCH=m
CONFIG_SND_SOC_ACPI_INTEL_SDCA_QUIRKS=m
CONFIG_SND_SOC_INTEL_AVS=m
#
# Intel AVS Machine drivers
#
#
# Available DSP configurations
#
# CONFIG_SND_SOC_INTEL_AVS_CARDNAME_OBSOLETE is not set
CONFIG_SND_SOC_INTEL_AVS_MACH_DA7219=m
CONFIG_SND_SOC_INTEL_AVS_MACH_DMIC=m
CONFIG_SND_SOC_INTEL_AVS_MACH_ES8336=m
CONFIG_SND_SOC_INTEL_AVS_MACH_HDAUDIO=m
CONFIG_SND_SOC_INTEL_AVS_MACH_I2S_TEST=m
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98927=m
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98357A=m
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98373=m
CONFIG_SND_SOC_INTEL_AVS_MACH_NAU8825=m
CONFIG_SND_SOC_INTEL_AVS_MACH_PCM3168A=m
CONFIG_SND_SOC_INTEL_AVS_MACH_PROBE=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT274=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT286=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT298=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5514=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5640=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5663=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5682=m
CONFIG_SND_SOC_INTEL_AVS_MACH_SSM4567=m
# end of Intel AVS Machine drivers
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
CONFIG_SND_SOC_INTEL_HDA_DSP_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_MAXIM_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_REALTEK_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_CIRRUS_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_NUVOTON_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_TI_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_BOARD_HELPERS=m
CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
CONFIG_SND_SOC_INTEL_BDW_RT5650_MACH=m
CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_WM5102_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m
# CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH is not set
CONFIG_SND_SOC_INTEL_SOF_WM8804_MACH=m
CONFIG_SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=m
CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=m
CONFIG_SND_SOC_INTEL_SOF_CS42L42_MACH=m
CONFIG_SND_SOC_INTEL_SOF_PCM512x_MACH=m
CONFIG_SND_SOC_INTEL_SOF_ES8336_MACH=m
CONFIG_SND_SOC_INTEL_SOF_NAU8825_MACH=m
CONFIG_SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH=m
CONFIG_SND_SOC_INTEL_SOF_DA7219_MACH=m
CONFIG_SND_SOC_INTEL_SOF_SSP_AMP_MACH=m
CONFIG_SND_SOC_INTEL_EHL_RT5660_MACH=m
CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=m
# end of Intel
#
# Mediatek
#
CONFIG_SND_SOC_MTK_BTCVSD=m
# end of Mediatek
#
# PXA
#
# end of PXA
#
# SoundWire (SDCA)
#
CONFIG_SND_SOC_SDCA=m
CONFIG_SND_SOC_SDCA_HID=y
CONFIG_SND_SOC_SDCA_IRQ=y
CONFIG_SND_SOC_SDCA_FDL=y
CONFIG_SND_SOC_SDCA_OPTIONAL=m
CONFIG_SND_SOC_SDCA_CLASS=m
CONFIG_SND_SOC_SDCA_CLASS_FUNCTION=m
# end of SoundWire (SDCA)
#
# ST SPEAr
#
# end of ST SPEAr
#
# Spreadtrum
#
# end of Spreadtrum
#
# STMicroelectronics STM32
#
# end of STMicroelectronics STM32
#
# Tegra
#
# end of Tegra
#
# Xilinx
#
CONFIG_SND_SOC_XILINX_I2S=m
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=m
CONFIG_SND_SOC_XILINX_SPDIF=m
# end of Xilinx
#
# Xtensa
#
CONFIG_SND_SOC_XTFPGA_I2S=m
# end of Xtensa
CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI_DEV=m
CONFIG_SND_SOC_SOF_PCI=m
CONFIG_SND_SOC_SOF_ACPI=m
CONFIG_SND_SOC_SOF_ACPI_DEV=m
CONFIG_SND_SOC_SOF_DEBUG_PROBES=m
CONFIG_SND_SOC_SOF_CLIENT=m
CONFIG_SND_SOC_SOF=m
CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE=y
CONFIG_SND_SOC_SOF_IPC3=y
CONFIG_SND_SOC_SOF_IPC4=y
CONFIG_SND_SOC_SOF_AMD_TOPLEVEL=m
CONFIG_SND_SOC_SOF_AMD_COMMON=m
CONFIG_SND_SOC_SOF_AMD_RENOIR=m
CONFIG_SND_SOC_SOF_AMD_VANGOGH=m
CONFIG_SND_SOC_SOF_AMD_REMBRANDT=m
CONFIG_SND_SOC_SOF_ACP_PROBES=m
CONFIG_SND_SOC_SOF_AMD_SOUNDWIRE_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_AMD_SOUNDWIRE=m
CONFIG_SND_SOC_SOF_AMD_ACP63=m
CONFIG_SND_SOC_SOF_AMD_ACP70=m
# CONFIG_SND_SOC_SOF_AMD_ACP7X is not set
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y
CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=m
CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=m
CONFIG_SND_SOC_SOF_INTEL_COMMON=m
CONFIG_SND_SOC_SOF_BAYTRAIL=m
# CONFIG_SND_SOC_SOF_BROADWELL is not set
CONFIG_SND_SOC_SOF_MERRIFIELD=m
# CONFIG_SND_SOC_SOF_SKYLAKE is not set
# CONFIG_SND_SOC_SOF_KABYLAKE is not set
CONFIG_SND_SOC_SOF_INTEL_APL=m
CONFIG_SND_SOC_SOF_APOLLOLAKE=m
CONFIG_SND_SOC_SOF_GEMINILAKE=m
CONFIG_SND_SOC_SOF_INTEL_CNL=m
CONFIG_SND_SOC_SOF_CANNONLAKE=m
CONFIG_SND_SOC_SOF_COFFEELAKE=m
CONFIG_SND_SOC_SOF_COMETLAKE=m
CONFIG_SND_SOC_SOF_INTEL_ICL=m
CONFIG_SND_SOC_SOF_ICELAKE=m
CONFIG_SND_SOC_SOF_JASPERLAKE=m
CONFIG_SND_SOC_SOF_INTEL_TGL=m
CONFIG_SND_SOC_SOF_TIGERLAKE=m
CONFIG_SND_SOC_SOF_ELKHARTLAKE=m
CONFIG_SND_SOC_SOF_ALDERLAKE=m
CONFIG_SND_SOC_SOF_INTEL_MTL=m
CONFIG_SND_SOC_SOF_METEORLAKE=m
CONFIG_SND_SOC_SOF_INTEL_LNL=m
CONFIG_SND_SOC_SOF_LUNARLAKE=m
CONFIG_SND_SOC_SOF_INTEL_PTL=m
CONFIG_SND_SOC_SOF_PANTHERLAKE=m
CONFIG_SND_SOC_SOF_INTEL_NVL=m
CONFIG_SND_SOC_SOF_NOVALAKE=m
CONFIG_SND_SOC_SOF_HDA_COMMON=m
CONFIG_SND_SOC_SOF_HDA_GENERIC=m
CONFIG_SND_SOC_SOF_HDA_MLINK=m
CONFIG_SND_SOC_SOF_HDA_LINK=y
CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC=y
CONFIG_SND_SOF_SOF_HDA_SDW_BPT=m
CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_HDA=m
CONFIG_SND_SOC_SOF_HDA_PROBES=m
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE=m
CONFIG_SND_SOC_SOF_XTENSA=m
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
CONFIG_SND_SOC_ARIZONA=m
CONFIG_SND_SOC_WM_ADSP=m
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_ADAU_UTILS=m
CONFIG_SND_SOC_ADAU1372=m
CONFIG_SND_SOC_ADAU1372_I2C=m
CONFIG_SND_SOC_ADAU1372_SPI=m
CONFIG_SND_SOC_ADAU1373=m
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU1761_SPI=m
# CONFIG_SND_SOC_ADAU1977_SPI is not set
# CONFIG_SND_SOC_ADAU1977_I2C is not set
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_ADAU7118=m
CONFIG_SND_SOC_ADAU7118_HW=m
CONFIG_SND_SOC_ADAU7118_I2C=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4118=m
CONFIG_SND_SOC_AK4375=m
CONFIG_SND_SOC_AK4458=m
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SOC_AK4619=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_AK5558=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_AUDIO_IIO_AUX=m
CONFIG_SND_SOC_AW8738=m
CONFIG_SND_SOC_AW88395_LIB=m
CONFIG_SND_SOC_AW88395=m
CONFIG_SND_SOC_AW88166=m
CONFIG_SND_SOC_AW88261=m
CONFIG_SND_SOC_AW88081=m
CONFIG_SND_SOC_AW87390=m
CONFIG_SND_SOC_AW88399_LIB=m
CONFIG_SND_SOC_AW88399=m
CONFIG_SND_SOC_BD28623=m
# CONFIG_SND_SOC_BT_SCO is not set
CONFIG_SND_SOC_CHV3_CODEC=m
CONFIG_SND_SOC_CROS_EC_CODEC=m
CONFIG_SND_SOC_CS_AMP_LIB=m
CONFIG_SND_SOC_CS35L32=m
CONFIG_SND_SOC_CS35L33=m
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS35L36=m
CONFIG_SND_SOC_CS35L41_LIB=m
CONFIG_SND_SOC_CS35L41=m
CONFIG_SND_SOC_CS35L41_SPI=m
CONFIG_SND_SOC_CS35L41_I2C=m
CONFIG_SND_SOC_CS35L45=m
CONFIG_SND_SOC_CS35L45_SPI=m
CONFIG_SND_SOC_CS35L45_I2C=m
CONFIG_SND_SOC_CS35L56=m
CONFIG_SND_SOC_CS35L56_SHARED=m
CONFIG_SND_SOC_CS35L56_I2C=m
CONFIG_SND_SOC_CS35L56_SPI=m
CONFIG_SND_SOC_CS35L56_SDW=m
CONFIG_SND_SOC_CS35L56_CAL_DEBUGFS_COMMON=y
#
# CS35L56 driver options
#
# CONFIG_SND_SOC_CS35L56_CAL_DEBUGFS is not set
CONFIG_SND_SOC_CS35L56_CAL_SET_CTRL=y
# CONFIG_SND_SOC_CS35L56_CAL_PERFORM_CTRL is not set
# end of CS35L56 driver options
CONFIG_SND_SOC_CS40L50=m
CONFIG_SND_SOC_CS42L42_CORE=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L42_SDW=m
CONFIG_SND_SOC_CS42L43=m
CONFIG_SND_SOC_CS42L43_SDW=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L51_I2C=m
CONFIG_SND_SOC_CS42L52=m
CONFIG_SND_SOC_CS42L56=m
CONFIG_SND_SOC_CS42L73=m
CONFIG_SND_SOC_CS42L83=m
CONFIG_SND_SOC_CS42L84=m
CONFIG_SND_SOC_CS4234=m
CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
CONFIG_SND_SOC_CS4271_SPI=m
CONFIG_SND_SOC_CS42XX8=m
# CONFIG_SND_SOC_CS42XX8_SPI is not set
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_CS43130=m
CONFIG_SND_SOC_CS4341=m
CONFIG_SND_SOC_CS4349=m
CONFIG_SND_SOC_CS48L32=m
CONFIG_SND_SOC_CS53L30=m
CONFIG_SND_SOC_CS530X=m
CONFIG_SND_SOC_CS530X_I2C=m
CONFIG_SND_SOC_CS530X_SPI=m
CONFIG_SND_SOC_CX2072X=m
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_HDMI_CODEC=m
CONFIG_SND_SOC_ES7134=m
CONFIG_SND_SOC_ES7241=m
CONFIG_SND_SOC_ES83XX_DSM_COMMON=m
CONFIG_SND_SOC_ES8311=m
CONFIG_SND_SOC_ES8316=m
CONFIG_SND_SOC_ES8323=m
CONFIG_SND_SOC_ES8326=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
CONFIG_SND_SOC_ES8328_SPI=m
CONFIG_SND_SOC_ES8375=m
CONFIG_SND_SOC_ES8389=m
CONFIG_SND_SOC_ES9356=m
CONFIG_SND_SOC_FS_AMP_LIB=m
CONFIG_SND_SOC_FS210X=m
CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_HDAC_HDA=m
CONFIG_SND_SOC_HDA=m
CONFIG_SND_SOC_ICS43432=m
CONFIG_SND_SOC_IDT821034=m
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98357A=m
CONFIG_SND_SOC_MAX98504=m
CONFIG_SND_SOC_MAX9867=m
CONFIG_SND_SOC_MAX98927=m
CONFIG_SND_SOC_MAX98520=m
CONFIG_SND_SOC_MAX98363=m
CONFIG_SND_SOC_MAX98373=m
CONFIG_SND_SOC_MAX98373_I2C=m
CONFIG_SND_SOC_MAX98373_SDW=m
CONFIG_SND_SOC_MAX98388=m
CONFIG_SND_SOC_MAX98390=m
CONFIG_SND_SOC_MAX98396=m
CONFIG_SND_SOC_MAX9860=m
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM1754=m
CONFIG_SND_SOC_PCM1789=m
CONFIG_SND_SOC_PCM1789_I2C=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
CONFIG_SND_SOC_PCM179X_SPI=m
CONFIG_SND_SOC_PCM186X=m
CONFIG_SND_SOC_PCM186X_I2C=m
CONFIG_SND_SOC_PCM186X_SPI=m
CONFIG_SND_SOC_PCM3060=m
CONFIG_SND_SOC_PCM3060_I2C=m
CONFIG_SND_SOC_PCM3060_SPI=m
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_PCM3168A_SPI=m
CONFIG_SND_SOC_PCM5102A=m
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
CONFIG_SND_SOC_PCM512x_SPI=m
CONFIG_SND_SOC_PCM6240=m
CONFIG_SND_SOC_PEB2466=m
CONFIG_SND_SOC_PM4125=m
CONFIG_SND_SOC_PM4125_SDW=m
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RT_SDW_COMMON=m
CONFIG_SND_SOC_RL6347A=m
CONFIG_SND_SOC_RT274=m
CONFIG_SND_SOC_RT286=m
CONFIG_SND_SOC_RT298=m
CONFIG_SND_SOC_RT1011=m
CONFIG_SND_SOC_RT1015=m
CONFIG_SND_SOC_RT1015P=m
CONFIG_SND_SOC_RT1017_SDCA_SDW=m
CONFIG_SND_SOC_RT1019=m
CONFIG_SND_SOC_RT1308=m
CONFIG_SND_SOC_RT1308_SDW=m
CONFIG_SND_SOC_RT1316_SDW=m
CONFIG_SND_SOC_RT1318_SDW=m
CONFIG_SND_SOC_RT1320_SDW=m
CONFIG_SND_SOC_RT5514=m
CONFIG_SND_SOC_RT5575=m
CONFIG_SND_SOC_RT5575_SPI=y
CONFIG_SND_SOC_RT5616=m
CONFIG_SND_SOC_RT5631=m
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5651=m
CONFIG_SND_SOC_RT5659=m
CONFIG_SND_SOC_RT5660=m
CONFIG_SND_SOC_RT5663=m
CONFIG_SND_SOC_RT5670=m
CONFIG_SND_SOC_RT5677=m
CONFIG_SND_SOC_RT5677_SPI=m
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_I2C=m
CONFIG_SND_SOC_RT5682_SDW=m
CONFIG_SND_SOC_RT5682S=m
CONFIG_SND_SOC_RT700=m
CONFIG_SND_SOC_RT700_SDW=m
CONFIG_SND_SOC_RT711=m
CONFIG_SND_SOC_RT711_SDW=m
CONFIG_SND_SOC_RT711_SDCA_SDW=m
CONFIG_SND_SOC_RT712_SDCA_SDW=m
CONFIG_SND_SOC_RT712_SDCA_DMIC_SDW=m
CONFIG_SND_SOC_RT721_SDCA_SDW=m
CONFIG_SND_SOC_RT722_SDCA_SDW=m
CONFIG_SND_SOC_RT715=m
CONFIG_SND_SOC_RT715_SDW=m
CONFIG_SND_SOC_RT715_SDCA_SDW=m
# CONFIG_SND_SOC_RT766_SDCA_SDW is not set
CONFIG_SND_SOC_RT9120=m
CONFIG_SND_SOC_RT9123=m
CONFIG_SND_SOC_RT9123P=m
CONFIG_SND_SOC_RTQ9124=m
CONFIG_SND_SOC_RTQ9128=m
# CONFIG_SND_SOC_SDW_MOCKUP is not set
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SI476X=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
CONFIG_SND_SOC_SIMPLE_MUX=m
CONFIG_SND_SOC_SMA1303=m
CONFIG_SND_SOC_SMA1307=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SRC4XXX_I2C=m
CONFIG_SND_SOC_SRC4XXX=m
CONFIG_SND_SOC_SSM2305=m
CONFIG_SND_SOC_SSM2518=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_SSM2602_SPI=m
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
CONFIG_SND_SOC_STA32X=m
CONFIG_SND_SOC_STA350=m
CONFIG_SND_SOC_STI_SAS=m
# CONFIG_SND_SOC_TAC5XX2_SDW is not set
CONFIG_SND_SOC_TAS2552=m
CONFIG_SND_SOC_TAS2562=m
CONFIG_SND_SOC_TAS2764=m
CONFIG_SND_SOC_TAS2770=m
CONFIG_SND_SOC_TAS2780=m
CONFIG_SND_SOC_TAS2781_COMLIB=m
CONFIG_SND_SOC_TAS2781_COMLIB_I2C=m
CONFIG_SND_SOC_TAS2781_FMWLIB=m
CONFIG_SND_SOC_TAS2781_I2C=m
CONFIG_SND_SOC_TAS2783_SDW=m
CONFIG_SND_SOC_TAS5086=m
CONFIG_SND_SOC_TAS571X=m
CONFIG_SND_SOC_TAS5720=m
CONFIG_SND_SOC_TAS5805M=m
CONFIG_SND_SOC_TAS6424=m
# CONFIG_SND_SOC_TAS675X is not set
CONFIG_SND_SOC_TDA7419=m
CONFIG_SND_SOC_TFA9879=m
CONFIG_SND_SOC_TFA989X=m
CONFIG_SND_SOC_TLV320ADC3XXX=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
CONFIG_SND_SOC_TLV320AIC23_SPI=m
CONFIG_SND_SOC_TLV320AIC31XX=m
CONFIG_SND_SOC_TLV320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
CONFIG_SND_SOC_TLV320AIC32X4_SPI=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320AIC3X_I2C=m
CONFIG_SND_SOC_TLV320AIC3X_SPI=m
CONFIG_SND_SOC_TLV320ADCX140=m
CONFIG_SND_SOC_TS3A227E=m
CONFIG_SND_SOC_TSCS42XX=m
CONFIG_SND_SOC_TSCS454=m
CONFIG_SND_SOC_UDA1334=m
CONFIG_SND_SOC_UDA1342=m
# CONFIG_SND_SOC_UDA1380 is not set
CONFIG_SND_SOC_WCD_CLASSH=m
CONFIG_SND_SOC_WCD_COMMON=m
CONFIG_SND_SOC_WCD9335=m
CONFIG_SND_SOC_WCD_MBHC=m
CONFIG_SND_SOC_WCD934X=m
CONFIG_SND_SOC_WCD937X=m
CONFIG_SND_SOC_WCD937X_SDW=m
CONFIG_SND_SOC_WCD938X=m
CONFIG_SND_SOC_WCD938X_SDW=m
CONFIG_SND_SOC_WCD939X=m
CONFIG_SND_SOC_WCD939X_SDW=m
CONFIG_SND_SOC_WM5102=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8524=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8731_I2C=m
CONFIG_SND_SOC_WM8731_SPI=m
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8770=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8782=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SOC_WM8804_SPI=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
CONFIG_SND_SOC_WM8940=m
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8961=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_WM8998=m
CONFIG_SND_SOC_WSA881X=m
CONFIG_SND_SOC_WSA883X=m
CONFIG_SND_SOC_WSA884X=m
# CONFIG_SND_SOC_WSA885X is not set
CONFIG_SND_SOC_ZL38060=m
CONFIG_SND_SOC_MAX9759=m
CONFIG_SND_SOC_MT6351=m
CONFIG_SND_SOC_MT6357=m
CONFIG_SND_SOC_MT6358=m
CONFIG_SND_SOC_MT6660=m
CONFIG_SND_SOC_NAU8315=m
CONFIG_SND_SOC_NAU8325=m
CONFIG_SND_SOC_NAU8540=m
CONFIG_SND_SOC_NAU8810=m
CONFIG_SND_SOC_NAU8821=m
CONFIG_SND_SOC_NAU8822=m
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_NAU8825=m
CONFIG_SND_SOC_NTPFW=m
CONFIG_SND_SOC_NTP8918=m
CONFIG_SND_SOC_NTP8835=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SOC_LPASS_MACRO_COMMON=m
CONFIG_SND_SOC_LPASS_WSA_MACRO=m
CONFIG_SND_SOC_LPASS_VA_MACRO=m
CONFIG_SND_SOC_LPASS_RX_MACRO=m
CONFIG_SND_SOC_LPASS_TX_MACRO=m
# end of CODEC drivers
CONFIG_SND_SOC_SDW_UTILS=m
#
# Generic drivers
#
CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
# end of Generic drivers
CONFIG_SND_X86=y
CONFIG_HDMI_LPE_AUDIO=m
CONFIG_SND_SYNTH_EMUX=m
CONFIG_SND_XEN_FRONTEND=m
CONFIG_SND_VIRTIO=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
CONFIG_HID_HAPTIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACCUTOUCH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
CONFIG_HID_APPLETB_BL=m
CONFIG_HID_APPLETB_KBD=m
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
CONFIG_HID_BIGBEN_FF=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
CONFIG_HID_COUGAR=m
CONFIG_HID_MACALLY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CMEDIA=m
CONFIG_HID_CP2112=m
CONFIG_HID_CREATIVE_SB0540=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELAN=m
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EVISION=m
CONFIG_HID_EZKEY=m
CONFIG_HID_FT260=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_GLORIOUS=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
# CONFIG_HID_HYPERX is not set
CONFIG_HID_VIVALDI_COMMON=m
CONFIG_HID_GOODIX_SPI=m
CONFIG_HID_GOOGLE_HAMMER=m
CONFIG_HID_GOOGLE_STADIA_FF=m
CONFIG_HID_VIVALDI=m
CONFIG_HID_GT683R=m
# CONFIG_HID_MSI is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_KYSONA=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_VIEWSONIC=m
CONFIG_HID_VRC2=m
CONFIG_HID_XIAOMI=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
# CONFIG_HID_LENOVO_GO is not set
# CONFIG_HID_LENOVO_GO_S is not set
CONFIG_HID_LETSKETCH=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MALTRON=m
CONFIG_HID_MAYFLASH=m
CONFIG_HID_MEGAWORLD_FF=m
# CONFIG_HID_RAKK is not set
CONFIG_HID_REDRAGON=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NINTENDO=m
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=m
CONFIG_HID_NTRIG=m
CONFIG_HID_NVIDIA_SHIELD=m
CONFIG_NVIDIA_SHIELD_FF=y
CONFIG_HID_ORTEK=m
# CONFIG_HID_OXP is not set
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PLAYSTATION=m
CONFIG_PLAYSTATION_FF=y
CONFIG_HID_PXRC=m
CONFIG_HID_RAPOO=m
CONFIG_HID_RAZER=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_RETRODE=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SEMITEK=m
CONFIG_HID_SIGMAMICRO=m
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=m
CONFIG_STEAM_FF=y
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_TOPRE=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=m
CONFIG_HID_U2FZERO=m
CONFIG_HID_UNIVERSAL_PIDFF=m
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_WINWING=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
CONFIG_HID_MCP2200=m
CONFIG_HID_MCP2221=m
# CONFIG_HID_HUAWEI is not set
# end of Special HID drivers
#
# HID-BPF support
#
CONFIG_HID_BPF=y
# end of HID-BPF support
CONFIG_I2C_HID=m
CONFIG_I2C_HID_ACPI=m
CONFIG_I2C_HID_OF=m
CONFIG_I2C_HID_CORE=m
#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER=m
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
CONFIG_AMD_SFH_HID=m
# end of AMD SFH HID Support
#
# Surface System Aggregator Module HID support
#
CONFIG_SURFACE_HID=m
CONFIG_SURFACE_KBD=m
# end of Surface System Aggregator Module HID support
CONFIG_SURFACE_HID_CORE=m
#
# Intel THC HID Support
#
CONFIG_INTEL_THC_HID=m
CONFIG_INTEL_QUICKSPI=m
CONFIG_INTEL_QUICKI2C=m
# end of Intel THC HID Support
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=m
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_PCI_AMD=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_DEFAULT_AUTHORIZATION_MODE=1
CONFIG_USB_MON=m
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PCI_RENESAS=m
CONFIG_USB_XHCI_PLATFORM=m
CONFIG_USB_XHCI_SIDEBAND=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_FSL=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_MAX3421_HCD=m
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=m
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m
# CONFIG_USB_HCD_TEST_MODE is not set
CONFIG_USB_XEN_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=m
CONFIG_USBIP_VUDC=m
# CONFIG_USBIP_DEBUG is not set
#
# USB dual-mode controller drivers
#
CONFIG_USB_CDNS_SUPPORT=m
CONFIG_USB_CDNS3=m
CONFIG_USB_CDNS3_HOST=y
CONFIG_USB_CDNS3_GADGET=y
#
# Platform glue driver support
#
CONFIG_USB_CDNS3_PCI_WRAP=m
CONFIG_USB_CDNSP_PCI=m
CONFIG_USB_MUSB_HDRC=m
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y
#
# Platform Glue Layer
#
#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_ULPI=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=m
CONFIG_USB_DWC3_HAPS=m
CONFIG_USB_DWC3_GOOGLE=m
CONFIG_USB_DWC2=m
# CONFIG_USB_DWC2_HOST is not set
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
CONFIG_USB_DWC2_PCI=m
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA_PCI=m
CONFIG_USB_CHIPIDEA_MSM=m
CONFIG_USB_CHIPIDEA_NPCM=m
CONFIG_USB_CHIPIDEA_GENERIC=m
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_F8153X=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_UPD78F0730=m
CONFIG_USB_SERIAL_XR=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_APPLE_MFI_FASTCHARGE=m
CONFIG_USB_LJCA=m
CONFIG_USB_USBIO=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HUB_USB251XB=m
CONFIG_USB_HSIC_USB3503=m
CONFIG_USB_HSIC_USB4604=m
CONFIG_USB_LINK_LAYER_TEST=m
CONFIG_USB_CHAOSKEY=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
CONFIG_USB_GPIO_VBUS=m
CONFIG_TAHVO_USB=m
# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set
CONFIG_USB_ISP1301=m
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y
#
# USB Peripheral Controller
#
CONFIG_USB_GR_UDC=m
CONFIG_USB_R8A66597=m
CONFIG_USB_PXA27X=m
CONFIG_USB_SNP_CORE=m
CONFIG_USB_M66592=m
CONFIG_USB_BDC_UDC=m
CONFIG_USB_AMD5536UDC=m
CONFIG_USB_NET2280=m
CONFIG_USB_GOKU=m
CONFIG_USB_EG20T=m
CONFIG_USB_MAX3420_UDC=m
CONFIG_USB_CDNS2_UDC=m
CONFIG_USB_DUMMY_HCD=m
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_U_ETHER=m
CONFIG_USB_U_AUDIO=m
CONFIG_USB_F_SERIAL=m
CONFIG_USB_F_OBEX=m
CONFIG_USB_F_NCM=m
CONFIG_USB_F_ECM=m
CONFIG_USB_F_PHONET=m
CONFIG_USB_F_EEM=m
CONFIG_USB_F_SUBSET=m
CONFIG_USB_F_RNDIS=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_FS=m
CONFIG_USB_F_UAC1=m
CONFIG_USB_F_UAC1_LEGACY=m
CONFIG_USB_F_UAC2=m
CONFIG_USB_F_UVC=m
CONFIG_USB_F_MIDI=m
CONFIG_USB_F_MIDI2=m
CONFIG_USB_F_HID=m
CONFIG_USB_F_PRINTER=m
CONFIG_USB_F_TCM=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_PHONET=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_MIDI2=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_CONFIGFS_F_TCM=y
#
# USB Gadget precomposed configurations
#
CONFIG_USB_ZERO=m
CONFIG_USB_AUDIO=m
# CONFIG_GADGET_UAC1 is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_GADGET_TARGET=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_USB_G_NOKIA=m
CONFIG_USB_G_ACM_MS=m
CONFIG_USB_G_MULTI=m
CONFIG_USB_G_MULTI_RNDIS=y
CONFIG_USB_G_MULTI_CDC=y
CONFIG_USB_G_HID=m
CONFIG_USB_G_DBGP=m
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=m
CONFIG_USB_RAW_GADGET=m
# end of USB Gadget precomposed configurations
CONFIG_TYPEC=m
CONFIG_TYPEC_TCPM=m
CONFIG_TYPEC_TCPCI=m
CONFIG_TYPEC_RT1711H=m
CONFIG_TYPEC_MT6360=m
CONFIG_TYPEC_TCPCI_MT6370=m
CONFIG_TYPEC_TCPCI_MAXIM=m
CONFIG_TYPEC_FUSB302=m
CONFIG_TYPEC_WCOVE=m
CONFIG_TYPEC_UCSI=m
CONFIG_UCSI_CCG=m
CONFIG_UCSI_ACPI=m
CONFIG_UCSI_STM32G0=m
CONFIG_CROS_EC_UCSI=m
CONFIG_TYPEC_TPS6598X=m
CONFIG_TYPEC_ANX7411=m
CONFIG_TYPEC_RT1719=m
CONFIG_TYPEC_HD3SS3220=m
CONFIG_TYPEC_STUSB160X=m
CONFIG_TYPEC_WUSB3801=m
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_FSA4480=m
CONFIG_TYPEC_MUX_GPIO_SBU=m
CONFIG_TYPEC_MUX_PI3USB30532=m
CONFIG_TYPEC_MUX_INTEL_PMC=m
CONFIG_TYPEC_MUX_IT5205=m
CONFIG_TYPEC_MUX_NB7VPQ904M=m
CONFIG_TYPEC_MUX_PS883X=m
CONFIG_TYPEC_MUX_PTN36502=m
CONFIG_TYPEC_MUX_TUSB1046=m
CONFIG_TYPEC_MUX_WCD939X_USBSS=m
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=m
CONFIG_TYPEC_NVIDIA_ALTMODE=m
CONFIG_TYPEC_TBT_ALTMODE=m
# end of USB Type-C Alternate Mode drivers
CONFIG_USB_ROLE_SWITCH=m
CONFIG_USB_ROLES_INTEL_XHCI=m
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
CONFIG_MMC_CRYPTO=y
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_UHS2=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_SDHCI_F_SDH30=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_ALCOR=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MMC_USDHI6ROL0=m
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
CONFIG_MMC_CQHCI=m
CONFIG_MMC_HSQ=m
CONFIG_MMC_TOSHIBA_PCI=m
CONFIG_MMC_MTK=m
CONFIG_MMC_SDHCI_XENON=m
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFS_CRYPTO=y
CONFIG_SCSI_UFS_HWMON=y
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
CONFIG_SCSI_UFSHCD_PLATFORM=m
CONFIG_SCSI_UFS_CDNS_PLATFORM=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_LEDS_EXPRESSWIRE=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
CONFIG_LEDS_88PM860X=m
CONFIG_LEDS_APU=m
CONFIG_LEDS_OSRAM_AMS_AS3668=m
CONFIG_LEDS_AW200XX=m
CONFIG_LEDS_CHT_WCOVE=m
CONFIG_LEDS_CROS_EC=m
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=m
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_LM3642=m
CONFIG_LEDS_MT6323=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
CONFIG_LEDS_LP8788=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA955X_GPIO=y
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_PCA995X=m
CONFIG_LEDS_QNAP_MCU=m
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DA903X=m
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2606MVV=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_ADP5520=m
CONFIG_LEDS_MAX5970=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_MAX77705=m
CONFIG_LEDS_MAX8997=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_MENF21BMC=m
CONFIG_LEDS_IS31FL319X=m
CONFIG_LEDS_UPBOARD=m
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_BLINKM_MULTICOLOR=y
CONFIG_LEDS_MLXCPLD=m
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=m
CONFIG_LEDS_NIC78BX=m
CONFIG_LEDS_SPI_BYTE=m
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM36274=m
# CONFIG_LEDS_LTC3220 is not set
CONFIG_LEDS_TPS6105X=m
#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AS3645A=m
CONFIG_LEDS_LM3601X=m
CONFIG_LEDS_MT6370_FLASH=m
CONFIG_LEDS_RT8515=m
CONFIG_LEDS_SGM3140=m
#
# RGB LED drivers
#
CONFIG_LEDS_KTD202X=m
CONFIG_LEDS_LP5812=m
CONFIG_LEDS_PWM_MULTICOLOR=m
CONFIG_LEDS_MT6370_RGB=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=m
CONFIG_LEDS_TRIGGER_PATTERN=m
CONFIG_LEDS_TRIGGER_TTY=m
CONFIG_LEDS_TRIGGER_INPUT_EVENTS=m
#
# Simatic LED drivers
#
CONFIG_LEDS_SIEMENS_SIMATIC_IPC=m
CONFIG_LEDS_SIEMENS_SIMATIC_IPC_APOLLOLAKE=m
CONFIG_LEDS_SIEMENS_SIMATIC_IPC_F7188X=m
CONFIG_LEDS_SIEMENS_SIMATIC_IPC_ELKHARTLAKE=m
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
# end of Speakup console speech
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_ACCESS_CORE=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
CONFIG_INFINIBAND_BNXT_RE=m
CONFIG_INFINIBAND_BNG_RE=m
CONFIG_INFINIBAND_CXGB4=m
CONFIG_INFINIBAND_EFA=m
CONFIG_INFINIBAND_ERDMA=m
CONFIG_INFINIBAND_HFI1=m
# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
# CONFIG_SDMA_VERBOSITY is not set
CONFIG_INFINIBAND_IONIC=m
CONFIG_INFINIBAND_IRDMA=m
CONFIG_MANA_INFINIBAND=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_OCRDMA=m
CONFIG_INFINIBAND_QEDR=m
CONFIG_INFINIBAND_USNIC=m
CONFIG_INFINIBAND_VMWARE_PVRDMA=m
CONFIG_INFINIBAND_RDMAVT=m
CONFIG_RDMA_RXE=m
CONFIG_RDMA_SIW=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
CONFIG_INFINIBAND_RTRS=m
CONFIG_INFINIBAND_RTRS_CLIENT=m
CONFIG_INFINIBAND_RTRS_SERVER=m
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_GHES=y
CONFIG_EDAC_SCRUB=y
CONFIG_EDAC_ECS=y
CONFIG_EDAC_MEM_REPAIR=y
CONFIG_EDAC_AMD64=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
CONFIG_EDAC_I10NM=m
CONFIG_EDAC_IMH=m
CONFIG_EDAC_PND2=m
CONFIG_EDAC_IGEN6=m
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=m
CONFIG_RTC_DRV_88PM80X=m
CONFIG_RTC_DRV_ABB5ZES3=m
CONFIG_RTC_DRV_ABEOZ9=m
CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_LP8788=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_MAX8907=m
CONFIG_RTC_DRV_MAX8925=m
CONFIG_RTC_DRV_MAX8998=m
CONFIG_RTC_DRV_MAX8997=m
CONFIG_RTC_DRV_MAX31335=m
CONFIG_RTC_DRV_NCT6694=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF85363=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_PALMAS=m
CONFIG_RTC_DRV_TPS6586X=m
CONFIG_RTC_DRV_TPS6594=m
CONFIG_RTC_DRV_TPS65910=m
CONFIG_RTC_DRV_RC5T583=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8010=m
CONFIG_RTC_DRV_RX8111=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3028=m
CONFIG_RTC_DRV_RV3032=m
CONFIG_RTC_DRV_RV8803=m
CONFIG_RTC_DRV_SD2405AL=m
CONFIG_RTC_DRV_SD3078=m
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1302=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1343=m
CONFIG_RTC_DRV_DS1347=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6916=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RX4581=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_PCF2123=m
CONFIG_RTC_DRV_MCP795=m
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y
CONFIG_RTC_DRV_RX6110=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1685_FAMILY=m
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_DA9052=m
CONFIG_RTC_DRV_DA9055=m
CONFIG_RTC_DRV_DA9063=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_CROS_EC=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_FTRTC010=m
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_RTC_DRV_MT6397=m
CONFIG_RTC_DRV_GOLDFISH=m
CONFIG_RTC_DRV_WILCO_EC=m
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_ALTERA_MSGDMA=m
CONFIG_INTEL_IDMA64=m
CONFIG_INTEL_IDXD_BUS=m
CONFIG_INTEL_IDXD=m
# CONFIG_INTEL_IDXD_COMPAT is not set
CONFIG_INTEL_IDXD_SVM=y
CONFIG_INTEL_IDXD_PERFMON=y
CONFIG_INTEL_IOATDMA=m
CONFIG_PLX_DMA=m
# CONFIG_SWITCHTEC_DMA is not set
CONFIG_XILINX_DMA=m
CONFIG_XILINX_XDMA=m
CONFIG_AMD_AE4DMA=m
CONFIG_AMD_PTDMA=m
CONFIG_AMD_QDMA=m
CONFIG_QCOM_HIDMA_MGMT=m
CONFIG_QCOM_HIDMA=m
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
CONFIG_DW_EDMA=m
CONFIG_DW_EDMA_PCIE=m
CONFIG_HSU_DMA=m
CONFIG_SF_PDMA=m
CONFIG_INTEL_LDMA=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
# CONFIG_DMABUF_DEBUG is not set
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
# CONFIG_DMABUF_HEAPS_SYSTEM_CC_SHARED is not set
CONFIG_DMABUF_HEAPS_CMA=y
# end of DMABUF options
CONFIG_DCA=m
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_UIO_MF624=m
CONFIG_UIO_HV_GENERIC=m
CONFIG_UIO_DFL=m
CONFIG_UIO_PCI_GENERIC_SVA=m
CONFIG_VFIO=m
CONFIG_VFIO_DEVICE_CDEV=y
CONFIG_VFIO_GROUP=y
CONFIG_VFIO_CONTAINER=y
CONFIG_VFIO_IOMMU_TYPE1=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_DEBUGFS=y
#
# VFIO support for PCI devices
#
CONFIG_VFIO_PCI_CORE=m
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=m
CONFIG_VFIO_PCI_VGA=y
CONFIG_VFIO_PCI_IGD=y
CONFIG_VFIO_PCI_DMABUF=y
CONFIG_MLX5_VFIO_PCI=m
CONFIG_PDS_VFIO_PCI=m
CONFIG_VIRTIO_VFIO_PCI=m
CONFIG_VIRTIO_VFIO_PCI_ADMIN_LEGACY=y
CONFIG_QAT_VFIO_PCI=m
CONFIG_XE_VFIO_PCI=m
# end of VFIO support for PCI devices
CONFIG_VFIO_MDEV=m
CONFIG_IRQ_BYPASS_MANAGER=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VMGENID=y
CONFIG_VBOXGUEST=m
CONFIG_NITRO_ENCLAVES=m
CONFIG_ACRN_HSM=m
CONFIG_EFI_SECRET=m
CONFIG_SEV_GUEST=m
CONFIG_TDX_GUEST_DRIVER=m
CONFIG_TSM_GUEST=y
CONFIG_TSM_REPORTS=m
CONFIG_TSM_MEASUREMENTS=y
CONFIG_TDX_HOST_SERVICES=m
CONFIG_TSM=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_ADMIN_LEGACY=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_VDPA=m
CONFIG_VIRTIO_PMEM=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MEM=m
CONFIG_VIRTIO_INPUT=m
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
CONFIG_VIRTIO_DEBUG=y
CONFIG_VIRTIO_RTC=m
CONFIG_VIRTIO_RTC_PTP=y
CONFIG_VIRTIO_RTC_CLASS=y
CONFIG_VDPA=m
CONFIG_VDPA_SIM=m
CONFIG_VDPA_SIM_NET=m
CONFIG_VDPA_SIM_BLOCK=m
CONFIG_VDPA_USER=m
CONFIG_IFCVF=m
CONFIG_MLX5_VDPA=y
CONFIG_MLX5_VDPA_NET=m
# CONFIG_MLX5_VDPA_STEERING_DEBUG is not set
CONFIG_VP_VDPA=m
CONFIG_ALIBABA_ENI_VDPA=m
CONFIG_SNET_VDPA=m
CONFIG_PDS_VDPA=m
CONFIG_OCTEONEP_VDPA=m
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST_RING=m
CONFIG_VHOST_TASK=y
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_VSOCK=m
CONFIG_VHOST_VDPA=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_VHOST_ENABLE_FORK_OWNER_CONTROL=y
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=y
# CONFIG_HYPERV_VTL_MODE is not set
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
CONFIG_HYPERV_VMBUS=m
CONFIG_MSHV_ROOT=m
# end of Microsoft Hyper-V guest support
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_MEMORY_HOTPLUG_LIMIT=512
CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=m
CONFIG_XEN_GNTDEV_DMABUF=y
CONFIG_XEN_GRANT_DEV_ALLOC=m
CONFIG_XEN_GRANT_DMA_ALLOC=y
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PCI_STUB=y
CONFIG_XEN_PCIDEV_BACKEND=m
CONFIG_XEN_PVCALLS_FRONTEND=m
CONFIG_XEN_PVCALLS_BACKEND=m
CONFIG_XEN_SCSI_BACKEND=m
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_PRIVCMD_EVENTFD=y
CONFIG_XEN_ACPI_PROCESSOR=m
CONFIG_XEN_MCE_LOG=y
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_XEN_FRONT_PGDIR_SHBUF=m
CONFIG_XEN_UNPOPULATED_ALLOC=y
CONFIG_XEN_GRANT_DMA_OPS=y
CONFIG_XEN_VIRTIO=y
# CONFIG_XEN_VIRTIO_FORCE_GRANT is not set
# end of Xen driver support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
CONFIG_GPIB=m
CONFIG_GPIB_COMMON=m
CONFIG_GPIB_AGILENT_82350B=m
CONFIG_GPIB_AGILENT_82357A=m
CONFIG_GPIB_CEC_PCI=m
CONFIG_GPIB_NI_PCI_ISA=m
CONFIG_GPIB_CB7210=m
CONFIG_GPIB_NI_USB=m
CONFIG_GPIB_INES=m
CONFIG_GPIB_PCMCIA=y
CONFIG_GPIB_LPVO=m
CONFIG_GPIB_TMS9914=m
CONFIG_GPIB_NEC7210=m
CONFIG_STAGING=y
CONFIG_RTL8723BS=m
#
# IIO staging drivers
#
#
# Accelerometers
#
CONFIG_ADIS16203=m
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD7816=m
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
CONFIG_ADT7316_SPI=m
CONFIG_ADT7316_I2C=m
# end of Analog digital bi-direction converters
#
# Direct Digital Synthesis
#
CONFIG_AD9832=m
CONFIG_AD9834=m
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
# end of Network Analyzer, Impedance Converters
# end of IIO staging drivers
# CONFIG_FB_SM750 is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_INTEL_ATOMISP is not set
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_SP8870=m
CONFIG_VIDEO_IPU3_IMGU=m
CONFIG_VIDEO_INTEL_IPU7=m
# CONFIG_VIDEO_MAX96712 is not set
# CONFIG_STAGING_MEDIA_DEPRECATED is not set
# CONFIG_FB_TFT is not set
CONFIG_MOST_COMPONENTS=m
CONFIG_MOST_NET=m
CONFIG_MOST_VIDEO=m
# CONFIG_VME_BUS is not set
# CONFIG_GOLDFISH is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_ACPI=m
CONFIG_CHROMEOS_LAPTOP=m
CONFIG_CHROMEOS_PSTORE=m
CONFIG_CHROMEOS_TBMC=m
CONFIG_CROS_EC=m
CONFIG_CROS_EC_I2C=m
CONFIG_CROS_EC_ISHTP=m
CONFIG_CROS_EC_SPI=m
CONFIG_CROS_EC_UART=m
CONFIG_CROS_EC_LPC=m
CONFIG_CROS_EC_PROTO=m
CONFIG_CROS_KBD_LED_BACKLIGHT=m
CONFIG_CROS_EC_CHARDEV=m
CONFIG_CROS_EC_LIGHTBAR=m
CONFIG_CROS_EC_DEBUGFS=m
CONFIG_CROS_EC_SENSORHUB=m
CONFIG_CROS_EC_SYSFS=m
CONFIG_CROS_EC_TYPEC_ALTMODES=y
CONFIG_CROS_EC_TYPEC=m
CONFIG_CROS_HPS_I2C=m
CONFIG_CROS_USBPD_LOGGER=m
CONFIG_CROS_USBPD_NOTIFY=m
CONFIG_CHROMEOS_PRIVACY_SCREEN=m
CONFIG_CROS_TYPEC_SWITCH=m
CONFIG_WILCO_EC=m
CONFIG_WILCO_EC_DEBUGFS=m
CONFIG_WILCO_EC_EVENTS=m
CONFIG_WILCO_EC_TELEMETRY=m
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLX_PLATFORM=m
CONFIG_MLXREG_DPU=m
CONFIG_MLXREG_HOTPLUG=m
CONFIG_MLXREG_IO=m
CONFIG_MLXREG_LC=m
CONFIG_NVSW_SN2201=m
CONFIG_SURFACE_PLATFORMS=y
CONFIG_SURFACE3_WMI=m
CONFIG_SURFACE_3_POWER_OPREGION=m
CONFIG_SURFACE_ACPI_NOTIFY=m
CONFIG_SURFACE_AGGREGATOR_CDEV=m
CONFIG_SURFACE_AGGREGATOR_HUB=m
CONFIG_SURFACE_AGGREGATOR_REGISTRY=m
CONFIG_SURFACE_AGGREGATOR_TABLET_SWITCH=m
CONFIG_SURFACE_DTX=m
CONFIG_SURFACE_GPE=m
CONFIG_SURFACE_HOTPLUG=m
CONFIG_SURFACE_PLATFORM_PROFILE=m
CONFIG_SURFACE_PRO3_BUTTON=m
CONFIG_SURFACE_AGGREGATOR=m
CONFIG_SURFACE_AGGREGATOR_BUS=y
# CONFIG_SURFACE_AGGREGATOR_ERROR_INJECTION is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_WMI_BMOF=m
CONFIG_HUAWEI_WMI=m
CONFIG_X86_PLATFORM_DRIVERS_UNIWILL=y
CONFIG_UNIWILL_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_NVIDIA_WMI_EC_BACKLIGHT=m
CONFIG_XIAOMI_WMI=m
CONFIG_REDMI_WMI=m
CONFIG_GIGABYTE_WMI=m
# CONFIG_BITLAND_MIFS_WMI is not set
CONFIG_ACERHDF=m
CONFIG_ACER_WIRELESS=m
CONFIG_ACER_WMI=m
CONFIG_AMD_HSMP=m
#
# AMD HSMP Driver
#
CONFIG_AMD_HSMP_ACPI=m
CONFIG_AMD_HSMP_PLAT=m
# end of AMD HSMP Driver
CONFIG_AMD_PMF=m
# CONFIG_AMD_PMF_DEBUG is not set
# CONFIG_AMD_PMF_UTIL_SUPPORT is not set
CONFIG_AMD_PMC=m
CONFIG_AMD_MP2_STB=y
CONFIG_AMD_HFI=y
CONFIG_AMD_3D_VCACHE=y
CONFIG_AMD_WBRF=y
# CONFIG_AMD_HALO_LED is not set
CONFIG_AMD_ISP_PLATFORM=m
CONFIG_ADV_SWBUTTON=m
CONFIG_APPLE_GMUX=m
CONFIG_ASUS_LAPTOP=m
CONFIG_ASUS_WIRELESS=m
CONFIG_ASUS_ARMOURY=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_WMI_DEPRECATED_ATTRS=y
CONFIG_ASUS_NB_WMI=m
CONFIG_ASUS_TF103C_DOCK=m
CONFIG_AYANEO_EC=m
CONFIG_MERAKI_MX100=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_EEEPC_WMI=m
CONFIG_X86_PLATFORM_DRIVERS_DELL=y
CONFIG_ALIENWARE_WMI=m
CONFIG_ALIENWARE_WMI_LEGACY=y
CONFIG_ALIENWARE_WMI_WMAX=y
CONFIG_DCDBAS=m
CONFIG_DELL_LAPTOP=m
# CONFIG_DELL_RBU is not set
CONFIG_DELL_RBTN=m
CONFIG_DELL_PC=m
CONFIG_DELL_SMBIOS=m
CONFIG_DELL_SMBIOS_WMI=y
CONFIG_DELL_SMBIOS_SMM=y
CONFIG_DELL_SMO8800=m
CONFIG_DELL_UART_BACKLIGHT=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_PRIVACY=y
CONFIG_DELL_WMI_AIO=m
CONFIG_DELL_WMI_DESCRIPTOR=m
CONFIG_DELL_WMI_DDV=m
CONFIG_DELL_WMI_LED=m
CONFIG_DELL_WMI_SYSMAN=m
# CONFIG_DELL_DW5826E_RESET is not set
CONFIG_AMILO_RFKILL=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
CONFIG_GPD_POCKET_FAN=m
CONFIG_X86_PLATFORM_DRIVERS_HP=y
CONFIG_HP_ACCEL=m
CONFIG_HP_WMI=m
CONFIG_HP_BIOSCFG=m
CONFIG_WIRELESS_HOTKEY=m
CONFIG_IBM_RTL=m
CONFIG_SENSORS_HDAPS=m
CONFIG_INTEL_ATOMISP2_PDX86=y
CONFIG_INTEL_ATOMISP2_LED=m
CONFIG_INTEL_ATOMISP2_PM=m
CONFIG_INTEL_IFS=m
CONFIG_INTEL_SAR_INT1092=m
CONFIG_INTEL_SKL_INT3472=m
CONFIG_INTEL_PMC_CORE=m
CONFIG_INTEL_PMC_SSRAM_TELEMETRY=m
CONFIG_INTEL_PMC_PWRM_TELEMETRY=m
CONFIG_INTEL_PMT_CLASS=m
CONFIG_INTEL_PMT_TELEMETRY=m
CONFIG_INTEL_PMT_CRASHLOG=m
CONFIG_INTEL_PMT_DISCOVERY=m
#
# Intel Speed Select Technology interface support
#
CONFIG_INTEL_SPEED_SELECT_TPMI=m
CONFIG_INTEL_SPEED_SELECT_INTERFACE=m
# end of Intel Speed Select Technology interface support
CONFIG_INTEL_TELEMETRY=m
CONFIG_INTEL_WMI=y
CONFIG_INTEL_WMI_SBL_FW_UPDATE=m
CONFIG_INTEL_WMI_THUNDERBOLT=m
#
# Intel Uncore Frequency Control
#
CONFIG_INTEL_UNCORE_FREQ_CONTROL_TPMI=m
CONFIG_INTEL_UNCORE_FREQ_CONTROL=m
# end of Intel Uncore Frequency Control
CONFIG_INTEL_HID_EVENT=m
CONFIG_INTEL_VBTN=m
CONFIG_INTEL_EHL_PSE_IO=m
CONFIG_INTEL_INT0002_VGPIO=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_INTEL_BXTWC_PMIC_TMU=m
CONFIG_INTEL_BYTCRC_PWRSRC=m
CONFIG_INTEL_CHTDC_TI_PWRBTN=m
CONFIG_INTEL_CHTWC_INT33FE=m
CONFIG_INTEL_ISHTP_ECLITE=m
CONFIG_INTEL_MRFLD_PWRBTN=m
CONFIG_INTEL_PUNIT_IPC=m
CONFIG_INTEL_RST=m
CONFIG_INTEL_SDSI=m
CONFIG_INTEL_SMARTCONNECT=m
CONFIG_INTEL_TPMI_POWER_DOMAINS=m
CONFIG_INTEL_TPMI=m
CONFIG_INTEL_PLR_TPMI=m
CONFIG_INTEL_TURBO_MAX_3=y
CONFIG_INTEL_VSEC=m
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_LENOVO_WMI_HOTKEY_UTILITIES=m
CONFIG_LENOVO_WMI_CAMERA=m
# CONFIG_LENOVO_YB9_KBDOCK is not set
CONFIG_LENOVO_YMC=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_THINKPAD_LMI=m
CONFIG_YOGABOOK=m
CONFIG_YT2_1380=m
CONFIG_LENOVO_WMI_CAPDATA=m
CONFIG_LENOVO_WMI_EVENTS=m
CONFIG_LENOVO_WMI_HELPERS=m
CONFIG_LENOVO_WMI_GAMEZONE=m
CONFIG_LENOVO_WMI_TUNING=m
CONFIG_ACPI_QUICKSTART=m
CONFIG_MEEGOPAD_ANX7428=m
CONFIG_MSI_EC=m
CONFIG_MSI_LAPTOP=m
CONFIG_MSI_WMI=m
CONFIG_MSI_WMI_PLATFORM=m
CONFIG_PCENGINES_APU2=m
CONFIG_PORTWELL_EC=m
CONFIG_BARCO_P50_GPIO=m
CONFIG_SAMSUNG_GALAXYBOOK=m
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_SAMSUNG_Q10=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
CONFIG_TOSHIBA_HAPS=m
CONFIG_TOSHIBA_WMI=m
CONFIG_ACPI_CMPC=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_LG_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_SYSTEM76_ACPI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_SERIAL_MULTI_INSTANTIATE=m
CONFIG_TOUCHSCREEN_DMI=y
CONFIG_INSPUR_PLATFORM_PROFILE=m
CONFIG_DASHARO_ACPI=m
CONFIG_X86_ANDROID_TABLETS=m
CONFIG_FW_ATTR_CLASS=m
CONFIG_INTEL_IPS=m
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU=y
CONFIG_INTEL_SCU_PCI=y
CONFIG_INTEL_SCU_PLATFORM=m
CONFIG_INTEL_SCU_IPC_UTIL=m
CONFIG_SIEMENS_SIMATIC_IPC=m
CONFIG_SIEMENS_SIMATIC_IPC_BATT=m
CONFIG_SIEMENS_SIMATIC_IPC_BATT_APOLLOLAKE=m
CONFIG_SIEMENS_SIMATIC_IPC_BATT_ELKHARTLAKE=m
CONFIG_SIEMENS_SIMATIC_IPC_BATT_F7188X=m
CONFIG_SILICOM_PLATFORM=m
CONFIG_WINMATE_FM07_KEYS=m
CONFIG_SEL3350_PLATFORM=m
CONFIG_OXP_EC=m
CONFIG_TUXEDO_NB04_WMI_AB=m
CONFIG_P2SB=y
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_WMI_LEGACY_DEVICE_NAMES is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=m
CONFIG_LMK04832=m
CONFIG_COMMON_CLK_MAX9485=m
CONFIG_COMMON_CLK_SI5341=m
CONFIG_COMMON_CLK_SI5351=m
CONFIG_COMMON_CLK_SI544=m
CONFIG_COMMON_CLK_CDCE706=m
CONFIG_COMMON_CLK_TPS68470=m
CONFIG_COMMON_CLK_CS2000_CP=m
CONFIG_CLK_TWL=m
CONFIG_CLK_TWL6040=m
CONFIG_COMMON_CLK_PALMAS=m
CONFIG_COMMON_CLK_PWM=m
#
# Cixtech Audio Subsystem Clock Driver
#
# end of Cixtech Audio Subsystem Clock Driver
CONFIG_XILINX_VCU=m
CONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=m
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMUFD_DRIVER=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_IOMMU_SVA=y
CONFIG_IOMMU_IOPF=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_IOMMUFD is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_PERF_EVENTS=y
CONFIG_IOMMUFD_DRIVER_CORE=y
CONFIG_IOMMUFD=m
CONFIG_IRQ_REMAP=y
CONFIG_VIRTIO_IOMMU=m
CONFIG_GENERIC_PT=y
# CONFIG_DEBUG_GENERIC_PT is not set
CONFIG_IOMMU_PT=y
CONFIG_IOMMU_PT_AMDV1=y
CONFIG_IOMMU_PT_VTDSS=y
# CONFIG_IOMMU_PT_RISCV64 is not set
CONFIG_IOMMU_PT_X86_64=y
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=m
CONFIG_RPMSG_CHAR=m
CONFIG_RPMSG_CTRL=m
CONFIG_RPMSG_NS=m
CONFIG_RPMSG_QCOM_GLINK=m
CONFIG_RPMSG_QCOM_GLINK_RPM=m
CONFIG_RPMSG_VIRTIO=m
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=m
#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_AMD=m
CONFIG_SOUNDWIRE_CADENCE=m
CONFIG_SOUNDWIRE_INTEL=m
CONFIG_SOUNDWIRE_QCOM=m
CONFIG_SOUNDWIRE_GENERIC_ALLOCATION=m
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers
CONFIG_WPCM450_SOC=m
CONFIG_QCOM_MDT_LOADER=m
CONFIG_QCOM_QMI_HELPERS=m
CONFIG_SOC_TI=y
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
#
# PM Domains
#
#
# Amlogic PM Domains
#
# end of Amlogic PM Domains
#
# Broadcom PM Domains
#
# end of Broadcom PM Domains
#
# i.MX PM Domains
#
# end of i.MX PM Domains
#
# Qualcomm PM Domains
#
# end of Qualcomm PM Domains
# end of PM Domains
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
CONFIG_DEVFREQ_GOV_POWERSAVE=m
CONFIG_DEVFREQ_GOV_USERSPACE=m
CONFIG_DEVFREQ_GOV_PASSIVE=m
#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
CONFIG_EXTCON_AXP288=m
CONFIG_EXTCON_FSA9480=m
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_INTEL_INT3496=m
CONFIG_EXTCON_INTEL_CHT_WC=m
CONFIG_EXTCON_INTEL_MRFLD=m
CONFIG_EXTCON_LC824206XA=m
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX77693=m
CONFIG_EXTCON_MAX77843=m
CONFIG_EXTCON_MAX8997=m
CONFIG_EXTCON_MAX14526=m
CONFIG_EXTCON_PALMAS=m
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_USBC_CROS_EC=m
CONFIG_EXTCON_USBC_TUSB320=m
CONFIG_MEMORY=y
CONFIG_FPGA_DFL_EMIF=m
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_BUFFER_DMA=m
CONFIG_IIO_BUFFER_DMAENGINE=m
CONFIG_IIO_BUFFER_HW_CONSUMER=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_GTS_HELPER=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_TRIGGERED_EVENT=m
CONFIG_IIO_BACKEND=m
#
# Accelerometers
#
CONFIG_ADIS16201=m
CONFIG_ADIS16209=m
CONFIG_ADXL313=m
CONFIG_ADXL313_I2C=m
CONFIG_ADXL313_SPI=m
CONFIG_ADXL345=m
CONFIG_ADXL345_I2C=m
CONFIG_ADXL345_SPI=m
CONFIG_ADXL355=m
CONFIG_ADXL355_I2C=m
CONFIG_ADXL355_SPI=m
CONFIG_ADXL367=m
CONFIG_ADXL367_SPI=m
CONFIG_ADXL367_I2C=m
CONFIG_ADXL372=m
CONFIG_ADXL372_SPI=m
CONFIG_ADXL372_I2C=m
CONFIG_ADXL380=m
CONFIG_ADXL380_SPI=m
CONFIG_ADXL380_I2C=m
CONFIG_BMA220=m
CONFIG_BMA220_I2C=m
CONFIG_BMA220_SPI=m
CONFIG_BMA400=m
CONFIG_BMA400_I2C=m
CONFIG_BMA400_SPI=m
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=m
CONFIG_BMI088_ACCEL=m
CONFIG_BMI088_ACCEL_I2C=m
CONFIG_BMI088_ACCEL_SPI=m
CONFIG_DA280=m
CONFIG_DA311=m
CONFIG_DMARD06=m
CONFIG_DMARD09=m
CONFIG_DMARD10=m
CONFIG_FXLS8962AF=m
CONFIG_FXLS8962AF_I2C=m
CONFIG_FXLS8962AF_SPI=m
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m
CONFIG_IIO_KX022A=m
CONFIG_IIO_KX022A_SPI=m
CONFIG_IIO_KX022A_I2C=m
CONFIG_KXSD9=m
CONFIG_KXSD9_SPI=m
CONFIG_KXSD9_I2C=m
CONFIG_KXCJK1013=m
CONFIG_MC3230=m
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
CONFIG_MMA7455_SPI=m
CONFIG_MMA7660=m
CONFIG_MMA8452=m
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
CONFIG_MSA311=m
CONFIG_MXC4005=m
CONFIG_MXC6255=m
CONFIG_SCA3000=m
CONFIG_SCA3300=m
CONFIG_STK8312=m
CONFIG_STK8BA50=m
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_IIO_ADC_HELPER=m
CONFIG_AD_SIGMA_DELTA=m
CONFIG_AD4000=m
CONFIG_AD4030=m
CONFIG_AD4080=m
CONFIG_AD4130=m
CONFIG_AD4134=m
CONFIG_AD4170_4=m
# CONFIG_AD4691 is not set
CONFIG_AD4695=m
CONFIG_AD4851=m
CONFIG_AD7091R=m
CONFIG_AD7091R5=m
CONFIG_AD7091R8=m
CONFIG_AD7124=m
CONFIG_AD7173=m
CONFIG_AD7191=m
CONFIG_AD7192=m
CONFIG_AD7266=m
CONFIG_AD7280=m
CONFIG_AD7291=m
CONFIG_AD7292=m
CONFIG_AD7298=m
CONFIG_AD7380=m
CONFIG_AD7405=m
CONFIG_AD7476=m
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
CONFIG_AD7606_IFACE_SPI=m
CONFIG_AD7625=m
CONFIG_AD7766=m
CONFIG_AD7768_1=m
CONFIG_AD7779=m
CONFIG_AD7780=m
CONFIG_AD7791=m
CONFIG_AD7793=m
CONFIG_AD7887=m
CONFIG_AD7923=m
CONFIG_AD7944=m
CONFIG_AD7949=m
CONFIG_AD799X=m
CONFIG_AD9467=m
CONFIG_ADE9000=m
CONFIG_AXP20X_ADC=m
CONFIG_AXP288_ADC=m
CONFIG_CC10001_ADC=m
CONFIG_DA9150_GPADC=m
CONFIG_DLN2_ADC=m
CONFIG_ENVELOPE_DETECTOR=m
CONFIG_GEHC_PMC_ADC=m
CONFIG_HI8435=m
CONFIG_HX711=m
CONFIG_INA2XX_ADC=m
CONFIG_INTEL_DC_TI_ADC=m
CONFIG_INTEL_MRFLD_ADC=m
CONFIG_LP8788_ADC=m
CONFIG_LTC2309=m
# CONFIG_LTC2378 is not set
CONFIG_LTC2471=m
CONFIG_LTC2485=m
CONFIG_LTC2496=m
CONFIG_LTC2497=m
CONFIG_MAX1027=m
CONFIG_MAX11100=m
CONFIG_MAX1118=m
CONFIG_MAX11205=m
CONFIG_MAX11410=m
CONFIG_MAX1241=m
CONFIG_MAX1363=m
CONFIG_MAX14001=m
CONFIG_MAX34408=m
CONFIG_MAX77541_ADC=m
CONFIG_MAX9611=m
CONFIG_MCP320X=m
CONFIG_MCP3422=m
CONFIG_MCP3564=m
CONFIG_MCP3911=m
# CONFIG_MEDIATEK_MT6323_AUXADC is not set
CONFIG_MEDIATEK_MT6359_AUXADC=m
CONFIG_MEDIATEK_MT6360_ADC=m
CONFIG_MEDIATEK_MT6370_ADC=m
CONFIG_MEN_Z188_ADC=m
CONFIG_MP2629_ADC=m
CONFIG_NAU7802=m
CONFIG_NCT7201=m
CONFIG_PAC1921=m
CONFIG_PAC1934=m
CONFIG_PALMAS_GPADC=m
CONFIG_ROHM_BD79112=m
CONFIG_ROHM_BD79124=m
CONFIG_RICHTEK_RTQ6056=m
CONFIG_SD_ADC_MODULATOR=m
CONFIG_TI_ADC081C=m
CONFIG_TI_ADC0832=m
CONFIG_TI_ADC084S021=m
CONFIG_TI_ADC108S102=m
CONFIG_TI_ADC12138=m
CONFIG_TI_ADC128S052=m
CONFIG_TI_ADC161S626=m
CONFIG_TI_ADS1015=m
CONFIG_TI_ADS1018=m
CONFIG_TI_ADS1100=m
CONFIG_TI_ADS1119=m
# CONFIG_TI_ADS112C14 is not set
CONFIG_TI_ADS124S08=m
CONFIG_TI_ADS1298=m
CONFIG_TI_ADS131E08=m
CONFIG_TI_ADS131M02=m
CONFIG_TI_ADS7138=m
CONFIG_TI_ADS7924=m
CONFIG_TI_ADS7950=m
CONFIG_TI_ADS8344=m
CONFIG_TI_ADS8688=m
CONFIG_TI_LMP92064=m
CONFIG_TI_TLC4541=m
CONFIG_TI_TSC2046=m
CONFIG_TWL4030_MADC=m
CONFIG_TWL6030_GPADC=m
# CONFIG_VERSAL_SYSMON_I2C is not set
CONFIG_VF610_ADC=m
CONFIG_VIPERBOARD_ADC=m
CONFIG_XILINX_XADC=m
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
CONFIG_AD74115=m
CONFIG_AD74413R=m
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=m
# end of Analog Front Ends
#
# Amplifiers
#
CONFIG_AD8366=m
CONFIG_ADA4250=m
CONFIG_ADL8113=m
CONFIG_HMC425=m
# end of Amplifiers
#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7746=m
# end of Capacitance to digital converters
#
# Chemical Sensors
#
CONFIG_AOSONG_AGS02MA=m
CONFIG_ATLAS_PH_SENSOR=m
CONFIG_ATLAS_EZO_SENSOR=m
CONFIG_BME680=m
CONFIG_BME680_I2C=m
CONFIG_BME680_SPI=m
CONFIG_CCS811=m
CONFIG_ENS160=m
CONFIG_ENS160_I2C=m
CONFIG_ENS160_SPI=m
CONFIG_IAQCORE=m
CONFIG_MHZ19B=m
CONFIG_PMS7003=m
CONFIG_SCD30_CORE=m
CONFIG_SCD30_I2C=m
CONFIG_SCD30_SERIAL=m
CONFIG_SCD4X=m
CONFIG_SEN0322=m
CONFIG_SENSIRION_SGP30=m
CONFIG_SENSIRION_SGP40=m
CONFIG_SPS30=m
CONFIG_SPS30_I2C=m
CONFIG_SPS30_SERIAL=m
CONFIG_SENSEAIR_SUNRISE_CO2=m
CONFIG_VZ89X=m
# end of Chemical Sensors
CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE=m
CONFIG_IIO_CROS_EC_ACTIVITY=m
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common
CONFIG_IIO_INV_SENSORS_TIMESTAMP=m
CONFIG_IIO_MS_SENSORS_I2C=m
#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=m
CONFIG_IIO_SSP_SENSORHUB=m
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=m
CONFIG_IIO_ST_SENSORS_CORE=m
#
# Digital to analog converters
#
CONFIG_AD3530R=m
CONFIG_AD3552R_HS=m
CONFIG_AD3552R_LIB=m
CONFIG_AD3552R=m
CONFIG_AD5064=m
CONFIG_AD5360=m
CONFIG_AD5380=m
CONFIG_AD5421=m
CONFIG_AD5446=m
CONFIG_AD5446_SPI=m
CONFIG_AD5446_I2C=m
CONFIG_AD5449=m
CONFIG_AD5592R_BASE=m
CONFIG_AD5592R=m
CONFIG_AD5593R=m
CONFIG_AD5504=m
CONFIG_AD5624R_SPI=m
# CONFIG_AD5706R is not set
CONFIG_AD9739A=m
CONFIG_LTC2688=m
CONFIG_AD5686=m
CONFIG_AD5686_SPI=m
CONFIG_AD5696_I2C=m
CONFIG_AD5755=m
CONFIG_AD5758=m
CONFIG_AD5761=m
CONFIG_AD5764=m
CONFIG_AD5766=m
CONFIG_AD5770R=m
CONFIG_AD5791=m
CONFIG_AD7293=m
CONFIG_AD7303=m
CONFIG_AD8460=m
CONFIG_AD8801=m
CONFIG_BD79703=m
CONFIG_DPOT_DAC=m
CONFIG_DS4424=m
CONFIG_LTC1660=m
CONFIG_LTC2632=m
CONFIG_LTC2664=m
CONFIG_M62332=m
CONFIG_MAX517=m
CONFIG_MAX22007=m
CONFIG_MAX5522=m
CONFIG_MAX5821=m
CONFIG_MCP4725=m
CONFIG_MCP4728=m
# CONFIG_MCP47A1 is not set
CONFIG_MCP47FEB02=m
CONFIG_MCP4821=m
CONFIG_MCP4922=m
CONFIG_TI_DAC082S085=m
CONFIG_TI_DAC5571=m
CONFIG_TI_DAC7311=m
CONFIG_TI_DAC7612=m
CONFIG_VF610_DAC=m
# end of Digital to analog converters
#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
# end of IIO dummy driver
#
# Filters
#
CONFIG_ADMV8818=m
# end of Filters
#
# Flow sensors
#
# CONFIG_SENSIRION_SLF3S is not set
# end of Flow sensors
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=m
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF41513 is not set
CONFIG_ADF4350=m
CONFIG_ADF4371=m
CONFIG_ADF4377=m
CONFIG_ADMFM2000=m
CONFIG_ADMV1013=m
CONFIG_ADMV1014=m
CONFIG_ADMV4420=m
CONFIG_ADRF6780=m
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
CONFIG_ADIS16136=m
CONFIG_ADIS16260=m
CONFIG_ADXRS290=m
CONFIG_ADXRS450=m
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
CONFIG_FXAS21002C_SPI=m
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
CONFIG_ITG3200=m
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=m
CONFIG_AFE4404=m
CONFIG_MAX30100=m
CONFIG_MAX30102=m
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
CONFIG_AM2315=m
CONFIG_DHT11=m
CONFIG_ENS210=m
CONFIG_HDC100X=m
CONFIG_HDC2010=m
CONFIG_HDC3020=m
CONFIG_HID_SENSOR_HUMIDITY=m
CONFIG_HTS221=m
CONFIG_HTS221_I2C=m
CONFIG_HTS221_SPI=m
CONFIG_HTU21=m
CONFIG_SI7005=m
CONFIG_SI7020=m
# end of Humidity sensors
#
# Inertial measurement units
#
CONFIG_ADIS16400=m
CONFIG_ADIS16460=m
CONFIG_ADIS16475=m
CONFIG_ADIS16480=m
CONFIG_ADIS16550=m
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
CONFIG_BMI160_SPI=m
CONFIG_BMI270=m
CONFIG_BMI270_I2C=m
CONFIG_BMI270_SPI=m
CONFIG_BMI323=m
CONFIG_BMI323_I2C=m
CONFIG_BMI323_SPI=m
CONFIG_BOSCH_BNO055=m
CONFIG_BOSCH_BNO055_SERIAL=m
CONFIG_BOSCH_BNO055_I2C=m
CONFIG_FXOS8700=m
CONFIG_FXOS8700_I2C=m
CONFIG_FXOS8700_SPI=m
CONFIG_KMX61=m
CONFIG_INV_ICM42600=m
CONFIG_INV_ICM42600_I2C=m
CONFIG_INV_ICM42600_SPI=m
# CONFIG_INV_ICM42607_I2C is not set
# CONFIG_INV_ICM42607_SPI is not set
CONFIG_INV_ICM45600=m
CONFIG_INV_ICM45600_I2C=m
CONFIG_INV_ICM45600_SPI=m
CONFIG_INV_MPU6050_IIO=m
CONFIG_INV_MPU6050_I2C=m
CONFIG_INV_MPU6050_SPI=m
CONFIG_SMI240=m
CONFIG_SMI330=m
CONFIG_SMI330_I2C=m
CONFIG_SMI330_SPI=m
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_SPI=m
CONFIG_IIO_ST_LSM9DS0=m
CONFIG_IIO_ST_LSM9DS0_I2C=m
CONFIG_IIO_ST_LSM9DS0_SPI=m
# end of Inertial measurement units
CONFIG_IIO_ADIS_LIB=m
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ACPI_ALS=m
CONFIG_ADJD_S311=m
CONFIG_ADUX1020=m
CONFIG_AL3000A=m
CONFIG_AL3010=m
CONFIG_AL3320A=m
CONFIG_APDS9160=m
CONFIG_APDS9300=m
CONFIG_APDS9306=m
CONFIG_APDS9960=m
# CONFIG_APDS9999 is not set
CONFIG_AS73211=m
CONFIG_BH1745=m
CONFIG_BH1750=m
CONFIG_BH1780=m
CONFIG_CM32181=m
CONFIG_CM3232=m
CONFIG_CM3323=m
CONFIG_CM3605=m
CONFIG_CM36651=m
CONFIG_IIO_CROS_EC_LIGHT_PROX=m
CONFIG_GP2AP002=m
CONFIG_GP2AP020A00F=m
CONFIG_IQS621_ALS=m
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
CONFIG_ISL29125=m
CONFIG_ISL76682=m
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
CONFIG_JSA1212=m
CONFIG_ROHM_BU27034=m
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
CONFIG_LTR390=m
CONFIG_LTR501=m
CONFIG_LTRF216A=m
CONFIG_LV0104CS=m
CONFIG_MAX44000=m
CONFIG_MAX44009=m
CONFIG_NOA1305=m
CONFIG_OPT3001=m
CONFIG_OPT4001=m
CONFIG_OPT4060=m
CONFIG_PA12203001=m
CONFIG_SI1133=m
CONFIG_SI1145=m
CONFIG_STK3310=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25_SPI=m
CONFIG_TCS3414=m
CONFIG_TCS3472=m
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL2583=m
CONFIG_TSL2591=m
CONFIG_TSL2772=m
CONFIG_TSL4531=m
CONFIG_US5182D=m
CONFIG_VCNL4000=m
CONFIG_VCNL4035=m
CONFIG_VEML3235=m
# CONFIG_VEML3328 is not set
CONFIG_VEML6030=m
CONFIG_VEML6040=m
CONFIG_VEML6046X00=m
CONFIG_VEML6070=m
CONFIG_VEML6075=m
CONFIG_VL6180=m
CONFIG_ZOPT2201=m
# end of Light sensors
#
# Magnetometer sensors
#
CONFIG_AK8974=m
CONFIG_AK8975=m
CONFIG_AK09911=m
CONFIG_ALS31300=m
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_BMC150_MAGN_SPI=m
CONFIG_MAG3110=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
CONFIG_MMC35240=m
CONFIG_MMC5633=m
# CONFIG_MMC5983 is not set
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
CONFIG_INFINEON_TLV493D=m
# CONFIG_QMC5883L is not set
# CONFIG_QMC6308 is not set
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_SENSORS_HMC5843_SPI=m
CONFIG_SENSORS_RM3100=m
CONFIG_SENSORS_RM3100_I2C=m
CONFIG_SENSORS_RM3100_SPI=m
CONFIG_SI7210=m
CONFIG_TI_TMAG5273=m
CONFIG_YAMAHA_YAS530=m
# end of Magnetometer sensors
#
# Multiplexers
#
CONFIG_IIO_MUX=m
# end of Multiplexers
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# end of Inclinometer sensors
#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=m
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
# end of Triggers - standalone
#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=m
CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE=m
# end of Linear and angular position sensors
#
# Digital potentiometers
#
CONFIG_AD5110=m
CONFIG_AD5272=m
CONFIG_DS1803=m
CONFIG_MAX5432=m
CONFIG_MAX5481=m
CONFIG_MAX5487=m
CONFIG_MCP4018=m
CONFIG_MCP4131=m
CONFIG_MCP4531=m
CONFIG_MCP41010=m
CONFIG_TPL0102=m
CONFIG_X9250=m
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats
#
# Pressure sensors
#
CONFIG_ABP060MG=m
CONFIG_ABP2030PA=m
CONFIG_ABP2030PA_I2C=m
CONFIG_ABP2030PA_SPI=m
CONFIG_ROHM_BM1390=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_BMP280_SPI=m
CONFIG_IIO_CROS_EC_BARO=m
CONFIG_DLHL60D=m
CONFIG_DPS310=m
CONFIG_HID_SENSOR_PRESS=m
CONFIG_HP03=m
CONFIG_HSC030PA=m
CONFIG_HSC030PA_I2C=m
CONFIG_HSC030PA_SPI=m
CONFIG_ICP10100=m
CONFIG_MPL115=m
CONFIG_MPL115_I2C=m
CONFIG_MPL115_SPI=m
CONFIG_MPL3115=m
CONFIG_MPRLS0025PA=m
CONFIG_MPRLS0025PA_I2C=m
CONFIG_MPRLS0025PA_SPI=m
CONFIG_MS5611=m
CONFIG_MS5611_I2C=m
CONFIG_MS5611_SPI=m
CONFIG_MS5637=m
CONFIG_SDP500=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_IIO_ST_PRESS_SPI=m
CONFIG_T5403=m
CONFIG_HP206C=m
CONFIG_ZPA2326=m
CONFIG_ZPA2326_I2C=m
CONFIG_ZPA2326_SPI=m
CONFIG_ADP810=m
# end of Pressure sensors
#
# Lightning sensors
#
CONFIG_AS3935=m
# end of Lightning sensors
#
# Proximity and distance sensors
#
CONFIG_CROS_EC_MKBP_PROXIMITY=m
CONFIG_D3323AA=m
CONFIG_HX9023S=m
CONFIG_IRSD200=m
CONFIG_ISL29501=m
CONFIG_LIDAR_LITE_V2=m
CONFIG_MB1232=m
CONFIG_PING=m
CONFIG_RFD77402=m
CONFIG_SRF04=m
CONFIG_SX_COMMON=m
CONFIG_SX9310=m
CONFIG_SX9324=m
CONFIG_SX9360=m
CONFIG_SX9500=m
CONFIG_SRF08=m
CONFIG_VCNL3020=m
CONFIG_VL53L0X_I2C=m
# CONFIG_VL53L1X_I2C is not set
CONFIG_AW96103=m
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
CONFIG_AD2S90=m
CONFIG_AD2S1200=m
CONFIG_AD2S1210=m
# end of Resolver to digital converters
#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=m
CONFIG_LTC2983=m
CONFIG_MAXIM_THERMOCOUPLE=m
CONFIG_HID_SENSOR_TEMP=m
CONFIG_MLX90614=m
CONFIG_MLX90632=m
CONFIG_MLX90635=m
CONFIG_TMP006=m
CONFIG_TMP007=m
CONFIG_TMP117=m
CONFIG_TSYS01=m
CONFIG_TSYS02D=m
CONFIG_MAX30208=m
CONFIG_MAX31856=m
CONFIG_MAX31865=m
CONFIG_MCP9600=m
# end of Temperature sensors
CONFIG_NTB=m
CONFIG_NTB_MSI=y
CONFIG_NTB_AMD=m
CONFIG_NTB_IDT=m
CONFIG_NTB_INTEL=m
CONFIG_NTB_EPF=m
CONFIG_NTB_SWITCHTEC=m
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_MSI_TEST is not set
CONFIG_NTB_TRANSPORT=m
CONFIG_PWM=y
# CONFIG_PWM_DEBUG is not set
CONFIG_PWM_PROVIDE_GPIO=y
CONFIG_PWM_CLK=m
CONFIG_PWM_CRC=y
CONFIG_PWM_CROS_EC=m
CONFIG_PWM_DWC_CORE=m
CONFIG_PWM_DWC=m
CONFIG_PWM_GPIO=m
CONFIG_PWM_IQS620A=m
CONFIG_PWM_LP3943=m
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
CONFIG_PWM_MAX7360=m
CONFIG_PWM_PCA9685=m
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
#
# IRQ chip support
#
CONFIG_IRQ_MSI_LIB=y
CONFIG_MADERA_IRQ=m
# end of IRQ chip support
CONFIG_IPACK_BUS=m
CONFIG_BOARD_TPCI200=m
CONFIG_SERIAL_IPOCTAL=m
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_GPIO=m
CONFIG_RESET_TI_SYSCON=m
CONFIG_RESET_TI_TPS380X=m
#
# PHY Subsystem
#
CONFIG_PHY_COMMON_PROPS=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_CAN_TRANSCEIVER=m
CONFIG_PHY_GOOGLE_USB=m
CONFIG_USB_LGM_PHY=m
# CONFIG_PHY_NXP_TJA1145 is not set
#
# PHY drivers for Broadcom platforms
#
CONFIG_BCM_KONA_USB2_PHY=m
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_INTEL_LGM_EMMC=m
CONFIG_PHY_PXA_28NM_HSIC=m
CONFIG_PHY_PXA_28NM_USB2=m
CONFIG_PHY_CPCAP_USB=m
CONFIG_PHY_QCOM_USB_HS=m
CONFIG_PHY_QCOM_USB_HSIC=m
CONFIG_PHY_SAMSUNG_USB2=m
CONFIG_PHY_TUSB1210=m
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
CONFIG_INTEL_RAPL_TPMI=m
CONFIG_IDLE_INJECT=y
CONFIG_MCB=m
CONFIG_MCB_PCI=m
CONFIG_MCB_LPC=m
#
# Performance monitor support
#
CONFIG_DWC_PCIE_PMU=m
CONFIG_CXL_PMU=m
# end of Performance monitor support
CONFIG_RAS=y
CONFIG_RAS_CEC=y
# CONFIG_RAS_CEC_DEBUG is not set
CONFIG_AMD_ATL=m
CONFIG_AMD_ATL_PRM=y
CONFIG_RAS_FMPM=m
CONFIG_USB4=m
CONFIG_USB4_CONFIGFS=m
# CONFIG_USB4_DEBUGFS_WRITE is not set
# CONFIG_USB4_DMA_TEST is not set
# CONFIG_USB4_STREAM is not set
#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
# end of Android
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_RAMDAX=m
CONFIG_NVDIMM_KEYS=y
# CONFIG_NVDIMM_SECURITY_TEST is not set
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_DEV_DAX_HMEM=m
CONFIG_DEV_DAX_CXL=m
CONFIG_DEV_DAX_HMEM_DEVICES=y
CONFIG_DEV_DAX_FSDEV=m
CONFIG_DEV_DAX_KMEM=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_LAYOUTS is not set
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_93XX46 is not set
CONFIG_EEPROM_EE1004=m
CONFIG_EEPROM_M24LR=m
CONFIG_NVMEM_QNAP_MCU_EEPROM=m
CONFIG_NVMEM_RAVE_SP_EEPROM=m
CONFIG_NVMEM_RMEM=m
#
# HW tracing support
#
CONFIG_STM=m
CONFIG_STM_PROTO_BASIC=m
CONFIG_STM_PROTO_SYS_T=m
# CONFIG_STM_DUMMY is not set
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_ACPI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
CONFIG_FPGA=m
CONFIG_ALTERA_PR_IP_CORE=m
CONFIG_FPGA_MGR_ALTERA_PS_SPI=m
CONFIG_FPGA_MGR_ALTERA_CVP=m
CONFIG_FPGA_MGR_XILINX_CORE=m
CONFIG_FPGA_MGR_XILINX_SELECTMAP=m
CONFIG_FPGA_MGR_XILINX_SPI=m
CONFIG_FPGA_MGR_MACHXO2_SPI=m
CONFIG_FPGA_BRIDGE=m
CONFIG_ALTERA_FREEZE_BRIDGE=m
CONFIG_XILINX_PR_DECOUPLER=m
CONFIG_FPGA_REGION=m
CONFIG_FPGA_DFL=m
CONFIG_FPGA_DFL_FME=m
CONFIG_FPGA_DFL_FME_MGR=m
CONFIG_FPGA_DFL_FME_BRIDGE=m
CONFIG_FPGA_DFL_FME_REGION=m
CONFIG_FPGA_DFL_AFU=m
CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=m
CONFIG_FPGA_DFL_PCI=m
CONFIG_FPGA_M10_BMC_SEC_UPDATE=m
CONFIG_FPGA_MGR_MICROCHIP_SPI=m
CONFIG_FPGA_MGR_LATTICE_SYSCONFIG=m
CONFIG_FPGA_MGR_LATTICE_SYSCONFIG_SPI=m
# CONFIG_FPGA_MGR_EFINIX_SPI is not set
CONFIG_TEE=m
CONFIG_TEE_DMABUF_HEAPS=y
CONFIG_OPTEE_STATIC_PROTMEM_POOL=y
CONFIG_AMDTEE=m
CONFIG_MULTIPLEXER=y
# CONFIG_MUX_CORE is not set
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
CONFIG_MUX_ADGS1408=m
CONFIG_MUX_GPIO=m
# end of Multiplexer drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=m
CONFIG_SIOX_BUS_GPIO=m
CONFIG_SLIMBUS=m
CONFIG_INTERCONNECT=y
CONFIG_COUNTER=m
CONFIG_INTEL_QEP=m
CONFIG_INTERRUPT_CNT=m
CONFIG_MOST=m
CONFIG_MOST_USB_HDM=m
CONFIG_MOST_CDEV=m
CONFIG_MOST_SND=m
# CONFIG_PECI is not set
CONFIG_HTE=y
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_FS_STACK=y
CONFIG_BUFFER_HEAD=y
CONFIG_LEGACY_DIRECT_IO=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_SUPPORT_ASCII_CI=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DRAIN_INTENTS=y
CONFIG_XFS_LIVE_HOOKS=y
CONFIG_XFS_MEMORY_BUFS=y
CONFIG_XFS_BTREE_IN_MEM=y
CONFIG_XFS_ONLINE_SCRUB=y
# CONFIG_XFS_ONLINE_SCRUB_STATS is not set
CONFIG_XFS_ONLINE_REPAIR=y
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_EXPERIMENTAL is not set
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZORLE=y
CONFIG_F2FS_FS_LZ4=y
CONFIG_F2FS_FS_LZ4HC=y
CONFIG_F2FS_FS_ZSTD=y
CONFIG_F2FS_IOSTAT=y
CONFIG_F2FS_UNFAIR_RWSEM=y
CONFIG_ZONEFS_FS=m
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
CONFIG_FS_VERITY=y
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=y
CONFIG_FUSE_DAX=y
CONFIG_FUSE_PASSTHROUGH=y
CONFIG_FUSE_IO_URING=y
CONFIG_OVERLAY_FS=m
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_XINO_AUTO=y
CONFIG_OVERLAY_FS_METACOPY=y
# CONFIG_OVERLAY_FS_DEBUG is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
CONFIG_NETFS_DEBUG=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_FS_WOF_COMPRESSION is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_FS_POSIX_ACL is not set
CONFIG_NTFS3_FS=m
# CONFIG_NTFS3_64BIT_CLUSTER is not set
CONFIG_NTFS3_LZX_XPRESS=y
CONFIG_NTFS3_FS_POSIX_ACL=y
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_INODE64=y
CONFIG_TMPFS_QUOTA=y
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
# CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON is not set
CONFIG_HUGETLB_PAGE=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PMD_PAGE_TABLE_SHARING=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=m
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
CONFIG_UBIFS_FS_AUTHENTICATION=y
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_CRAMFS_MTD=y
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
CONFIG_SQUASHFS_DECOMP_MULTI=y
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT=y
CONFIG_SQUASHFS_MOUNT_DECOMP_THREADS=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_COMP_CACHE_FULL=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
CONFIG_RESCTRL_FS=y
CONFIG_RESCTRL_FS_PSEUDO_LOCK=y
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_COMPRESS=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
CONFIG_PSTORE_ZONE=m
CONFIG_PSTORE_BLK=m
CONFIG_PSTORE_BLK_BLKDEV=""
CONFIG_PSTORE_BLK_KMSG_SIZE=64
CONFIG_PSTORE_BLK_MAX_REASON=2
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EROFS_FS=m
# CONFIG_EROFS_FS_DEBUG is not set
CONFIG_EROFS_FS_XATTR=y
CONFIG_EROFS_FS_POSIX_ACL=y
CONFIG_EROFS_FS_SECURITY=y
CONFIG_EROFS_FS_BACKED_BY_FILE=y
CONFIG_EROFS_FS_ZIP=y
CONFIG_EROFS_FS_ZIP_LZMA=y
CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS=16
CONFIG_EROFS_FS_ZIP_DEFLATE=y
CONFIG_EROFS_FS_ZIP_ZSTD=y
CONFIG_EROFS_FS_ZIP_ACCEL=y
CONFIG_EROFS_FS_PCPU_KTHREAD=y
CONFIG_EROFS_FS_PCPU_KTHREAD_HIPRI=y
# CONFIG_EROFS_FS_PAGE_CACHE_SHARE is not set
CONFIG_VBOXSF_FS=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_0=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set
# CONFIG_NFS_V4_2_READ_PLUS is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V2 is not set
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_2_INTER_SSC=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_LEGACY_CLIENT_TRACKING is not set
# CONFIG_NFSD_V4_POSIX_ACLS is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_NFS_COMMON_LOCALIO_SUPPORT=m
CONFIG_NFS_LOCALIO=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
# CONFIG_SUNRPC_DEBUG_TRACE is not set
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CEPH_FS_SECURITY_LABEL=y
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
CONFIG_CIFS_SMB_DIRECT=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_COMPRESSION=y
CONFIG_SMB_SERVER=m
CONFIG_SMB_SERVER_SMBDIRECT=y
CONFIG_SMB_SERVER_CHECK_CAP_NET_ADMIN=y
CONFIG_SMB_SERVER_KERBEROS5=y
CONFIG_SMBDIRECT=m
CONFIG_SMBFS=m
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
# CONFIG_AFS_DEBUG_CURSOR is not set
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_NLS_UCS2_UTILS=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
CONFIG_UNICODE=y
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=m
CONFIG_HAVE_TRUSTED_KEYS=y
CONFIG_HAVE_TRUSTED_KEYS_DEBUG=y
# CONFIG_TRUSTED_KEYS_DEBUG is not set
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_TRUSTED_KEYS_TEE=y
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_PROC_MEM_ALWAYS_FORCE=y
# CONFIG_PROC_MEM_FORCE_PTRACE is not set
# CONFIG_PROC_MEM_NO_FORCE is not set
CONFIG_SECURITY=y
CONFIG_HAS_SECURITY_AUDIT=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_INFINIBAND=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_INTEL_TXT is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
CONFIG_SECURITY_SELINUX_AVC_HASH_BITS=9
# CONFIG_SECURITY_SELINUX_DEBUG is not set
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_SMACK_BRINGUP=y
CONFIG_SECURITY_SMACK_NETFILTER=y
CONFIG_SECURITY_SMACK_APPEND_SIGNALS=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/usr/bin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/usr/lib/systemd/systemd"
# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set
CONFIG_SECURITY_APPARMOR=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_COMPRESSED_POLICY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
CONFIG_SECURITY_LOADPIN=y
CONFIG_SECURITY_LOADPIN_ENFORCE=y
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_SAFESETID=y
CONFIG_SECURITY_LOCKDOWN_LSM=y
# CONFIG_SECURITY_LOCKDOWN_LSM_EARLY is not set
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
CONFIG_SECURITY_LANDLOCK=y
CONFIG_SECURITY_LANDLOCK_LOG=y
CONFIG_SECURITY_IPE=y
CONFIG_IPE_BOOT_POLICY=""
CONFIG_IPE_POLICY_SIG_SECONDARY_KEYRING=y
CONFIG_IPE_POLICY_SIG_PLATFORM_KEYRING=y
#
# IPE Trust Providers
#
CONFIG_IPE_PROP_DM_VERITY=y
CONFIG_IPE_PROP_DM_VERITY_SIGNATURE=y
CONFIG_IPE_PROP_FS_VERITY=y
CONFIG_IPE_PROP_FS_VERITY_BUILTIN_SIG=y
# end of IPE Trust Providers
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_PLATFORM_KEYRING=y
CONFIG_INTEGRITY_MACHINE_KEYRING=y
# CONFIG_INTEGRITY_CA_MACHINE_KEYRING is not set
CONFIG_LOAD_UEFI_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
# CONFIG_EVM is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
# CONFIG_KSTACK_ERASE is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
#
# Bounds checking
#
CONFIG_FORTIFY_SOURCE=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_DEFAULT_ON=y
# end of Bounds checking
#
# Hardening of kernel data structures
#
CONFIG_LIST_HARDENED=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Hardening of kernel data structures
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
# end of Kernel hardening options
# end of Security options
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SIG=y
CONFIG_CRYPTO_SIG2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_ACOMP=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_KRB5ENC=m
# CONFIG_CRYPTO_BENCHMARK is not set
CONFIG_CRYPTO_ENGINE=m
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=m
CONFIG_CRYPTO_MLDSA=m
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ARIA=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SM4=m
CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XCTR=m
CONFIG_CRYPTO_XTS=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_GENIV=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_STREEBOG=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ZSTD=y
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS=64
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE=32
CONFIG_CRYPTO_JITTERENTROPY_OSR=1
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface (deprecated)
#
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# end of Userspace interface (deprecated)
#
# Accelerated Cryptographic Algorithms for CPU (x86)
#
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
CONFIG_CRYPTO_ARIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_ARIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_ARIA_GFNI_AVX512_X86_64=m
CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=m
# end of Accelerated Cryptographic Algorithms for CPU (x86)
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_ATMEL_I2C=m
CONFIG_CRYPTO_DEV_ATMEL_ECC=m
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_SP_PSP=y
CONFIG_CRYPTO_DEV_CCP_DEBUGFS=y
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
CONFIG_CRYPTO_DEV_QAT_4XXX=m
CONFIG_CRYPTO_DEV_QAT_420XX=m
CONFIG_CRYPTO_DEV_QAT_6XXX=m
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
# CONFIG_CRYPTO_DEV_QAT_ERROR_INJECTION is not set
CONFIG_CRYPTO_DEV_IAA_CRYPTO=m
# CONFIG_CRYPTO_DEV_IAA_CRYPTO_STATS is not set
CONFIG_CRYPTO_DEV_CHELSIO=m
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_CRYPTO_DEV_SAFEXCEL=m
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_WAIVE_AUTHATTRS_REJECTION_FOR_MLDSA is not set
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
# CONFIG_MODULE_SIG_KEY_TYPE_RSA is not set
CONFIG_MODULE_SIG_KEY_TYPE_ECDSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_MLDSA_44 is not set
# CONFIG_MODULE_SIG_KEY_TYPE_MLDSA_65 is not set
# CONFIG_MODULE_SIG_KEY_TYPE_MLDSA_87 is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
CONFIG_SECONDARY_TRUSTED_KEYRING=y
# CONFIG_SECONDARY_TRUSTED_KEYRING_SIGNED_BY_BUILTIN is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
CONFIG_OPENSSL_SUPPORTS_ML_DSA=y
# end of Certificates for signature checking
CONFIG_CRYPTO_KRB5=m
# CONFIG_CRYPTO_KRB5_SELFTESTS is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
CONFIG_POLYNOMIAL=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_CRC7=m
CONFIG_CRC8=m
CONFIG_CRC16=y
CONFIG_CRC_CCITT=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_T10DIF_ARCH=y
CONFIG_CRC32=y
CONFIG_CRC32_ARCH=y
CONFIG_CRC64=y
CONFIG_CRC64_ARCH=y
CONFIG_CRC_OPTIMIZATIONS=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_AES_ARCH=y
CONFIG_CRYPTO_LIB_AESCFB=y
CONFIG_CRYPTO_LIB_AES_CBC=y
CONFIG_CRYPTO_LIB_AES_CBC_MACS=y
CONFIG_CRYPTO_LIB_AES_CCM=y
CONFIG_CRYPTO_LIB_AES_CTR=y
CONFIG_CRYPTO_LIB_AES_ECB=y
CONFIG_CRYPTO_LIB_AES_GCM=y
CONFIG_CRYPTO_LIB_AES_XTS=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_GF128MUL=m
CONFIG_CRYPTO_LIB_BLAKE2B=y
CONFIG_CRYPTO_LIB_BLAKE2S_ARCH=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CHACHA_ARCH=y
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_CURVE25519_ARCH=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_GF128HASH=y
CONFIG_CRYPTO_LIB_GF128HASH_ARCH=y
CONFIG_CRYPTO_LIB_MD5=y
CONFIG_CRYPTO_LIB_MLDSA=m
CONFIG_CRYPTO_LIB_NH=m
CONFIG_CRYPTO_LIB_NH_ARCH=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_POLY1305_ARCH=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA1_ARCH=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LIB_SHA256_ARCH=y
CONFIG_CRYPTO_LIB_SHA512=y
CONFIG_CRYPTO_LIB_SHA512_ARCH=y
CONFIG_CRYPTO_LIB_SHA3=y
CONFIG_XOR_BLOCKS=y
CONFIG_XOR_BLOCKS_ARCH=y
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_ARCH=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_XXHASH=y
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_ARM64=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_RISCV=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_INTERVAL_TREE_SPAN_ITER=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_CLOSURES=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS_HELPERS=y
CONFIG_NEED_SG_DMA_FLAGS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_SWIOTLB=y
CONFIG_SWIOTLB_DEFAULT_SIZE_MB=64
# CONFIG_SWIOTLB_DYNAMIC is not set
CONFIG_DMA_NEED_SYNC=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_NUMA_CMA is not set
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_VDSO_DATASTORE=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_OVERFLOW_PROTECT=y
CONFIG_VDSO_GETRANDOM=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_6x10 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_TER10x18 is not set
CONFIG_FONT_TER16x32=y
# CONFIG_FONT_6x8 is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_MAX_FRAMES=64
CONFIG_SBITMAP=y
CONFIG_PARMAN=m
CONFIG_OBJAGG=m
# CONFIG_LWQ_TEST is not set
# end of Library routines
CONFIG_PLDMFW=y
CONFIG_ASN1_ENCODER=m
CONFIG_FIRMWARE_TABLE=y
CONFIG_UNION_FIND=y
CONFIG_MIN_HEAP=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_PRINTK_EXECUTION_CTX=y
CONFIG_STACKTRACE_BUILD_ID=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=4
CONFIG_CONSOLE_LOGLEVEL_QUIET=1
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_BUGVERBOSE_DETAILED=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_ULEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
CONFIG_DEBUG_INFO_DWARF5=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_COMPRESSED_NONE=y
# CONFIG_DEBUG_INFO_COMPRESSED_ZLIB is not set
# CONFIG_DEBUG_INFO_COMPRESSED_ZSTD is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_BTF=y
CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y
CONFIG_DEBUG_INFO_BTF_MODULES=y
# CONFIG_MODULE_ALLOW_BTF_MISMATCH is not set
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_OBJTOOL=y
# CONFIG_OBJTOOL_WERROR is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x0
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# CONFIG_DEBUG_NET_SMALL_RTNL is not set
# end of Networking Debugging
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_TABLE_CHECK is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_ARCH_HAS_PTDUMP=y
CONFIG_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_PER_VMA_LOCK_STATS is not set
# CONFIG_MEM_ALLOC_PROFILING is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SHRINKER_DEBUG=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VFS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
CONFIG_KFENCE_DEFERRABLE=y
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
CONFIG_HAVE_ARCH_KMSAN=y
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR_INTR_STORM=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=0
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_HARDLOCKUP_DETECTOR_PREFER_BUDDY is not set
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
# CONFIG_HARDLOCKUP_DETECTOR_BUDDY is not set
# CONFIG_HARDLOCKUP_DETECTOR_ARCH is not set
CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=0
CONFIG_DETECT_HUNG_TASK_BLOCKER=y
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_WQ_CPU_INTENSIVE_REPORT is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_ATOMIC is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_NMI_CHECK_CPU is not set
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CLOSURES is not set
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_CPU_STALL_CPUTIME is not set
# CONFIG_RCU_CPU_STALL_NOTIFIER is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_RCU_DYNTICKS_TORTURE is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_CGROUP_REF is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FREGS=y
CONFIG_HAVE_FTRACE_GRAPH_FUNC=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_SINGLE_FTRACE_DIRECT_OPS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_REGS_HAVING_PT_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_JMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_OBJTOOL_NOP_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED is not set
CONFIG_BOOTTIME_TRACING=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_RETADDR=y
CONFIG_FUNCTION_TRACE_ARGS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_DYNAMIC_FTRACE_WITH_JMP=y
# CONFIG_FUNCTION_SELF_TRACING is not set
CONFIG_FPROBE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_OSNOISE_TRACER=y
CONFIG_TIMERLAT_TRACER=y
CONFIG_MMIOTRACE=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACE_SYSCALL_BUF_SIZE_DEFAULT=63
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_FPROBE_EVENTS=y
CONFIG_PROBE_EVENTS_BTF_ARGS=y
# CONFIG_PROBE_EVENTS_DUMP_FETCHARG is not set
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_EPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_BPF_KPROBE_OVERRIDE=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_USER_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_FTRACE_SORT_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_RING_BUFFER_PERSISTENT_INJECT is not set
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
# CONFIG_RV is not set
# CONFIG_TRACE_REMOTE_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# x86 Debugging
#
CONFIG_EARLY_PRINTK_USB=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_DHRY is not set
# CONFIG_LKDTM is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_TEST_MULDIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_MAPLE_TREE is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_PARMAN is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_WORKQUEUE is not set
# CONFIG_TEST_BPF is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_REGION_ALLOC_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_LIVEUPDATE_TEST is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_DYNAMIC_DEBUG is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_KALLSYMS is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_OBJAGG is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_HMM is not set
# CONFIG_TEST_FREE_PAGES is not set
# CONFIG_TEST_FPU is not set
# CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set
# CONFIG_TEST_OBJPOOL is not set
# CONFIG_TEST_KEXEC_HANDOVER is not set
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
CONFIG_IO_URING_ZCRX=y
CONFIG_IO_URING_BPF=y
CONFIG_IO_URING_BPF_OPS=y
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-25 15:12 ` Freeman Z
@ 2026-09-25 15:24 ` Mario Limonciello
2026-09-25 15:48 ` Freeman Z
0 siblings, 1 reply; 40+ messages in thread
From: Mario Limonciello @ 2026-09-25 15:24 UTC (permalink / raw)
To: Freeman Z, Mika Westerberg
Cc: Kovacs, Alexander, linux-pci@vger.kernel.org,
linux-usb@vger.kernel.org, bhelgaas@google.com,
westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
On 9/25/26 10:12, Freeman Z wrote:> Hi Mario, Alex and Mika,
>
> Sure. Attached is the exact .config used for my unmodified Linus v7.3-rc4 test
> that reproduces the failure.
>
> SHA256:
> 488899cc5a0b5f2de69466df2639e39769d40d90682f51690400399a549309c2
>
> This is the final .config used after make olddefconfig for the v7.3-rc4 test.
>
> The v7.3-rc4 delayed-rescan test that succeeded used the same configuration base.
> The patched kernel was distinguished with a different LOCALVERSION.
>
> Please let me know if there are any other platform or configuration details that
> would help align the reference-board setup.
>
Thanks. Can you also look for a BIOS update on your side from the
vendor in case it ends up being something unique to their BIOS?
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-25 15:24 ` Mario Limonciello
@ 2026-09-25 15:48 ` Freeman Z
2026-10-01 14:54 ` Kovacs, Alexander
0 siblings, 1 reply; 40+ messages in thread
From: Freeman Z @ 2026-09-25 15:48 UTC (permalink / raw)
To: Mario Limonciello, Mika Westerberg
Cc: Kovacs, Alexander, linux-pci@vger.kernel.org,
linux-usb@vger.kernel.org, bhelgaas@google.com,
westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
Hi Mario,
Yes. The laptop is already running BIOS 319, and I do not see a
newer BIOS available from ASUS for this model.
BIOS 319 has also been installed on this laptop for over 1 year,
the reproductions I reported were all done with this BIOS version.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Friday, September 25, 2026 23:24
To: Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 9/25/26 10:12, Freeman Z wrote:> Hi Mario, Alex and Mika,
>
> Sure. Attached is the exact .config used for my unmodified Linus v7.3-rc4 test
> that reproduces the failure.
>
> SHA256:
> 488899cc5a0b5f2de69466df2639e39769d40d90682f51690400399a549309c2
>
> This is the final .config used after make olddefconfig for the v7.3-rc4 test.
>
> The v7.3-rc4 delayed-rescan test that succeeded used the same configuration base.
> The patched kernel was distinguished with a different LOCALVERSION.
>
> Please let me know if there are any other platform or configuration details that
> would help align the reference-board setup.
>
Thanks. Can you also look for a BIOS update on your side from the
vendor in case it ends up being something unique to their BIOS?
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-09-25 15:48 ` Freeman Z
@ 2026-10-01 14:54 ` Kovacs, Alexander
2026-10-01 18:28 ` Freeman Z
0 siblings, 1 reply; 40+ messages in thread
From: Kovacs, Alexander @ 2026-10-01 14:54 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
AMD General
Freeman,
Do you see any toggling between suspended and active (mostly shows in sysfs as active but quickly and randomly toggles to different states) on the AMD HOST Bridge Tunnel (maybe 00:04.1)? It seems the Barlow Ridge controller is the cause of the toggling on my test system. I have tried this with 2 docks utilizing this controller and see that the Kensington SD5000T5 dock uses it also.
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Friday, September 25, 2026 10:49 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mario,
Yes. The laptop is already running BIOS 319, and I do not see a newer BIOS available from ASUS for this model.
BIOS 319 has also been installed on this laptop for over 1 year, the reproductions I reported were all done with this BIOS version.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Friday, September 25, 2026 23:24
To: Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 9/25/26 10:12, Freeman Z wrote:> Hi Mario, Alex and Mika,
>
> Sure. Attached is the exact .config used for my unmodified Linus
> v7.3-rc4 test that reproduces the failure.
>
> SHA256:
> 488899cc5a0b5f2de69466df2639e39769d40d90682f51690400399a549309c2
>
> This is the final .config used after make olddefconfig for the v7.3-rc4 test.
>
> The v7.3-rc4 delayed-rescan test that succeeded used the same configuration base.
> The patched kernel was distinguished with a different LOCALVERSION.
>
> Please let me know if there are any other platform or configuration
> details that would help align the reference-board setup.
>
Thanks. Can you also look for a BIOS update on your side from the vendor in case it ends up being something unique to their BIOS?
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-01 14:54 ` Kovacs, Alexander
@ 2026-10-01 18:28 ` Freeman Z
2026-10-05 14:35 ` Kovacs, Alexander
0 siblings, 1 reply; 40+ messages in thread
From: Freeman Z @ 2026-10-01 18:28 UTC (permalink / raw)
To: Kovacs, Alexander, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
Hi Alex,
I tested this with my original workaround disabled and after a reboot.
The Kensington SD5000T5 was connected the entire time, and
0000:00:04.1 had power/control=auto.
I first monitored the sysfs runtime PM state directly. On my system,
0000:00:04.1 stayed consistently suspended rather than rapidly toggling
between active and suspended.
I then traced the kernel runtime-PM events for 3 minutes, filtering for
0000:00:04.1 and 0000:6b:00.6. I enabled:
rpm:rpm_status
rpm:rpm_suspend
rpm:rpm_resume
rpm:rpm_idle
rpm:rpm_usage
rpm:rpm_return_int
There were no events for either device during the 3-minute trace.
At the end of the test, the states were:
0000:00:04.1
runtime_status = suspended
power_state = D3cold
0000:6b:00.6
runtime_status = active
power_state = D0
I am not seeing the active/suspended toggling on 0000:00:04.1 that
you are seeing on your test system, at least under this configuration.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Thursday, October 1, 2026 22:54
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Do you see any toggling between suspended and active (mostly shows in sysfs as active but quickly and randomly toggles to different states) on the AMD HOST Bridge Tunnel (maybe 00:04.1)? It seems the Barlow Ridge controller is the cause of the toggling on my test system. I have tried this with 2 docks utilizing this controller and see that the Kensington SD5000T5 dock uses it also.
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Friday, September 25, 2026 10:49 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mario,
Yes. The laptop is already running BIOS 319, and I do not see a newer BIOS available from ASUS for this model.
BIOS 319 has also been installed on this laptop for over 1 year, the reproductions I reported were all done with this BIOS version.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Friday, September 25, 2026 23:24
To: Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 9/25/26 10:12, Freeman Z wrote:> Hi Mario, Alex and Mika,
>
> Sure. Attached is the exact .config used for my unmodified Linus
> v7.3-rc4 test that reproduces the failure.
>
> SHA256:
> 488899cc5a0b5f2de69466df2639e39769d40d90682f51690400399a549309c2
>
> This is the final .config used after make olddefconfig for the v7.3-rc4 test.
>
> The v7.3-rc4 delayed-rescan test that succeeded used the same configuration base.
> The patched kernel was distinguished with a different LOCALVERSION.
>
> Please let me know if there are any other platform or configuration
> details that would help align the reference-board setup.
>
Thanks. Can you also look for a BIOS update on your side from the vendor in case it ends up being something unique to their BIOS?
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-01 18:28 ` Freeman Z
@ 2026-10-05 14:35 ` Kovacs, Alexander
2026-10-05 15:39 ` Freeman Z
0 siblings, 1 reply; 40+ messages in thread
From: Kovacs, Alexander @ 2026-10-05 14:35 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
AMD General
Hi Freeman,
I have applied a patch to stop the toggling between suspended and active of the 00:04.1 (AMD TB Tunnel Port Hub) and the Barlow Ridge device on my test system. Just to better understand why you are not seeing that issue and I am,
can I get a zip of:
sudo cp /sys/firmware/acpi/tables/DSDT /sys/firmware/acpi/tables/SSDT* /<tmp-dir>/
iasl -d /<tmp-dir>/DSDT /<tmp-dir>/SSDT* # decompile together so cross-refs resolve
The ASL may give us an idea of your original issue with the dock suspending and not recovering sub-devices...
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Thursday, October 1, 2026 1:28 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I tested this with my original workaround disabled and after a reboot.
The Kensington SD5000T5 was connected the entire time, and
0000:00:04.1 had power/control=auto.
I first monitored the sysfs runtime PM state directly. On my system,
0000:00:04.1 stayed consistently suspended rather than rapidly toggling between active and suspended.
I then traced the kernel runtime-PM events for 3 minutes, filtering for
0000:00:04.1 and 0000:6b:00.6. I enabled:
rpm:rpm_status
rpm:rpm_suspend
rpm:rpm_resume
rpm:rpm_idle
rpm:rpm_usage
rpm:rpm_return_int
There were no events for either device during the 3-minute trace.
At the end of the test, the states were:
0000:00:04.1
runtime_status = suspended
power_state = D3cold
0000:6b:00.6
runtime_status = active
power_state = D0
I am not seeing the active/suspended toggling on 0000:00:04.1 that you are seeing on your test system, at least under this configuration.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Thursday, October 1, 2026 22:54
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Do you see any toggling between suspended and active (mostly shows in sysfs as active but quickly and randomly toggles to different states) on the AMD HOST Bridge Tunnel (maybe 00:04.1)? It seems the Barlow Ridge controller is the cause of the toggling on my test system. I have tried this with 2 docks utilizing this controller and see that the Kensington SD5000T5 dock uses it also.
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Friday, September 25, 2026 10:49 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mario,
Yes. The laptop is already running BIOS 319, and I do not see a newer BIOS available from ASUS for this model.
BIOS 319 has also been installed on this laptop for over 1 year, the reproductions I reported were all done with this BIOS version.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Friday, September 25, 2026 23:24
To: Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 9/25/26 10:12, Freeman Z wrote:> Hi Mario, Alex and Mika,
>
> Sure. Attached is the exact .config used for my unmodified Linus
> v7.3-rc4 test that reproduces the failure.
>
> SHA256:
> 488899cc5a0b5f2de69466df2639e39769d40d90682f51690400399a549309c2
>
> This is the final .config used after make olddefconfig for the v7.3-rc4 test.
>
> The v7.3-rc4 delayed-rescan test that succeeded used the same configuration base.
> The patched kernel was distinguished with a different LOCALVERSION.
>
> Please let me know if there are any other platform or configuration
> details that would help align the reference-board setup.
>
Thanks. Can you also look for a BIOS update on your side from the vendor in case it ends up being something unique to their BIOS?
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-05 14:35 ` Kovacs, Alexander
@ 2026-10-05 15:39 ` Freeman Z
2026-10-05 17:01 ` Kovacs, Alexander
0 siblings, 1 reply; 40+ messages in thread
From: Freeman Z @ 2026-10-05 15:39 UTC (permalink / raw)
To: Kovacs, Alexander, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
[-- Attachment #1: Type: text/plain, Size: 8669 bytes --]
Hi Alex,
Sure. Attached is the ACPI dump from my ASUS ROG Flow X13 GV302XV running BIOS 319.
I copied the DSDT and all SSDTs from `/sys/firmware/acpi/tables/` and decompiled them together with `iasl -d DSDT SSDT*` as requested.
The archive contains both the original AML tables and the resulting DSL files, along with the iasl output log.
SHA256:
9c2664d8927f2550d171860867f00fbebe161c18017cf58fb84445475c392469
One potentially relevant detail I noticed is that `0000:00:04.1` maps to `\_SB.PCI0.GP12` (`_ADR = 0x00040001`).
Its `_DSD` advertises `HotPlugSupportInD3 = 1` and associates it with `\_SB.PCI0.GP19.NHI1` as USB4 port 2.
The NHI1 power-down path also references GP12 and appears to contain explicit handling for PCIe `[0:4:1]`.
Please let me know if you would like any additional traces captured while reproducing the failure.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Monday, October 5, 2026 22:35
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Hi Freeman,
I have applied a patch to stop the toggling between suspended and active of the 00:04.1 (AMD TB Tunnel Port Hub) and the Barlow Ridge device on my test system. Just to better understand why you are not seeing that issue and I am,
can I get a zip of:
sudo cp /sys/firmware/acpi/tables/DSDT /sys/firmware/acpi/tables/SSDT* /<tmp-dir>/
iasl -d /<tmp-dir>/DSDT /<tmp-dir>/SSDT* # decompile together so cross-refs resolve
The ASL may give us an idea of your original issue with the dock suspending and not recovering sub-devices...
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Thursday, October 1, 2026 1:28 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I tested this with my original workaround disabled and after a reboot.
The Kensington SD5000T5 was connected the entire time, and
0000:00:04.1 had power/control=auto.
I first monitored the sysfs runtime PM state directly. On my system,
0000:00:04.1 stayed consistently suspended rather than rapidly toggling between active and suspended.
I then traced the kernel runtime-PM events for 3 minutes, filtering for
0000:00:04.1 and 0000:6b:00.6. I enabled:
rpm:rpm_status
rpm:rpm_suspend
rpm:rpm_resume
rpm:rpm_idle
rpm:rpm_usage
rpm:rpm_return_int
There were no events for either device during the 3-minute trace.
At the end of the test, the states were:
0000:00:04.1
runtime_status = suspended
power_state = D3cold
0000:6b:00.6
runtime_status = active
power_state = D0
I am not seeing the active/suspended toggling on 0000:00:04.1 that you are seeing on your test system, at least under this configuration.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Thursday, October 1, 2026 22:54
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Do you see any toggling between suspended and active (mostly shows in sysfs as active but quickly and randomly toggles to different states) on the AMD HOST Bridge Tunnel (maybe 00:04.1)? It seems the Barlow Ridge controller is the cause of the toggling on my test system. I have tried this with 2 docks utilizing this controller and see that the Kensington SD5000T5 dock uses it also.
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Friday, September 25, 2026 10:49 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mario,
Yes. The laptop is already running BIOS 319, and I do not see a newer BIOS available from ASUS for this model.
BIOS 319 has also been installed on this laptop for over 1 year, the reproductions I reported were all done with this BIOS version.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Friday, September 25, 2026 23:24
To: Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 9/25/26 10:12, Freeman Z wrote:> Hi Mario, Alex and Mika,
>
> Sure. Attached is the exact .config used for my unmodified Linus
> v7.3-rc4 test that reproduces the failure.
>
> SHA256:
> 488899cc5a0b5f2de69466df2639e39769d40d90682f51690400399a549309c2
>
> This is the final .config used after make olddefconfig for the v7.3-rc4 test.
>
> The v7.3-rc4 delayed-rescan test that succeeded used the same configuration base.
> The patched kernel was distinguished with a different LOCALVERSION.
>
> Please let me know if there are any other platform or configuration
> details that would help align the reference-board setup.
>
Thanks. Can you also look for a BIOS update on your side from the vendor in case it ends up being something unique to their BIOS?
[-- Attachment #2: GV302XV-BIOS319-ACPI.zip --]
[-- Type: application/zip, Size: 292189 bytes --]
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-05 15:39 ` Freeman Z
@ 2026-10-05 17:01 ` Kovacs, Alexander
2026-10-05 17:10 ` Freeman Z
0 siblings, 1 reply; 40+ messages in thread
From: Kovacs, Alexander @ 2026-10-05 17:01 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
AMD General
Freeman,
Sorry if this is a repeat question, this (non-returning sub-devices) happens if the dock is plugged on both the 00:03.1 & 00:04.1 path, correct?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Monday, October 5, 2026 10:39 AM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Sure. Attached is the ACPI dump from my ASUS ROG Flow X13 GV302XV running BIOS 319.
I copied the DSDT and all SSDTs from `/sys/firmware/acpi/tables/` and decompiled them together with `iasl -d DSDT SSDT*` as requested.
The archive contains both the original AML tables and the resulting DSL files, along with the iasl output log.
SHA256:
9c2664d8927f2550d171860867f00fbebe161c18017cf58fb84445475c392469
One potentially relevant detail I noticed is that `0000:00:04.1` maps to `\_SB.PCI0.GP12` (`_ADR = 0x00040001`).
Its `_DSD` advertises `HotPlugSupportInD3 = 1` and associates it with `\_SB.PCI0.GP19.NHI1` as USB4 port 2.
The NHI1 power-down path also references GP12 and appears to contain explicit handling for PCIe `[0:4:1]`.
Please let me know if you would like any additional traces captured while reproducing the failure.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Monday, October 5, 2026 22:35
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Hi Freeman,
I have applied a patch to stop the toggling between suspended and active of the 00:04.1 (AMD TB Tunnel Port Hub) and the Barlow Ridge device on my test system. Just to better understand why you are not seeing that issue and I am, can I get a zip of:
sudo cp /sys/firmware/acpi/tables/DSDT /sys/firmware/acpi/tables/SSDT* /<tmp-dir>/
iasl -d /<tmp-dir>/DSDT /<tmp-dir>/SSDT* # decompile together so cross-refs resolve
The ASL may give us an idea of your original issue with the dock suspending and not recovering sub-devices...
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Thursday, October 1, 2026 1:28 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I tested this with my original workaround disabled and after a reboot.
The Kensington SD5000T5 was connected the entire time, and
0000:00:04.1 had power/control=auto.
I first monitored the sysfs runtime PM state directly. On my system,
0000:00:04.1 stayed consistently suspended rather than rapidly toggling between active and suspended.
I then traced the kernel runtime-PM events for 3 minutes, filtering for
0000:00:04.1 and 0000:6b:00.6. I enabled:
rpm:rpm_status
rpm:rpm_suspend
rpm:rpm_resume
rpm:rpm_idle
rpm:rpm_usage
rpm:rpm_return_int
There were no events for either device during the 3-minute trace.
At the end of the test, the states were:
0000:00:04.1
runtime_status = suspended
power_state = D3cold
0000:6b:00.6
runtime_status = active
power_state = D0
I am not seeing the active/suspended toggling on 0000:00:04.1 that you are seeing on your test system, at least under this configuration.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Thursday, October 1, 2026 22:54
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Do you see any toggling between suspended and active (mostly shows in sysfs as active but quickly and randomly toggles to different states) on the AMD HOST Bridge Tunnel (maybe 00:04.1)? It seems the Barlow Ridge controller is the cause of the toggling on my test system. I have tried this with 2 docks utilizing this controller and see that the Kensington SD5000T5 dock uses it also.
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Friday, September 25, 2026 10:49 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mario,
Yes. The laptop is already running BIOS 319, and I do not see a newer BIOS available from ASUS for this model.
BIOS 319 has also been installed on this laptop for over 1 year, the reproductions I reported were all done with this BIOS version.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Friday, September 25, 2026 23:24
To: Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 9/25/26 10:12, Freeman Z wrote:> Hi Mario, Alex and Mika,
>
> Sure. Attached is the exact .config used for my unmodified Linus
> v7.3-rc4 test that reproduces the failure.
>
> SHA256:
> 488899cc5a0b5f2de69466df2639e39769d40d90682f51690400399a549309c2
>
> This is the final .config used after make olddefconfig for the v7.3-rc4 test.
>
> The v7.3-rc4 delayed-rescan test that succeeded used the same configuration base.
> The patched kernel was distinguished with a different LOCALVERSION.
>
> Please let me know if there are any other platform or configuration
> details that would help align the reference-board setup.
>
Thanks. Can you also look for a BIOS update on your side from the vendor in case it ends up being something unique to their BIOS?
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-05 17:01 ` Kovacs, Alexander
@ 2026-10-05 17:10 ` Freeman Z
2026-10-06 14:33 ` Kovacs, Alexander
0 siblings, 1 reply; 40+ messages in thread
From: Freeman Z @ 2026-10-05 17:10 UTC (permalink / raw)
To: Kovacs, Alexander, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
Hi Alex,
I checked the PCI topology on this system.
This laptop has only one physical USB4-capable port, and I do not appear to have a 0000:00:03.1 device at all.
`lspci -nn -s 00:03.1` returns no device, and `/sys/bus/pci/devices/0000:00:03.1/` does not exist.
The relevant part of the PCI topology is:
00:03.0
00:04.0
00:04.1-[09-68]----00.0-[0a-68]--...
And 00:04.1 is reported as:
00:04.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD]
Family 19h USB4/Thunderbolt PCIe tunnel [1022:14ef]
All of my reproductions with the Kensington SD5000T5 have therefore been through the 00:04.1 path.
I do not currently have a second 00:03.1 path that I can test.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Tuesday, October 6, 2026 1:01
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Sorry if this is a repeat question, this (non-returning sub-devices) happens if the dock is plugged on both the 00:03.1 & 00:04.1 path, correct?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Monday, October 5, 2026 10:39 AM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Sure. Attached is the ACPI dump from my ASUS ROG Flow X13 GV302XV running BIOS 319.
I copied the DSDT and all SSDTs from `/sys/firmware/acpi/tables/` and decompiled them together with `iasl -d DSDT SSDT*` as requested.
The archive contains both the original AML tables and the resulting DSL files, along with the iasl output log.
SHA256:
9c2664d8927f2550d171860867f00fbebe161c18017cf58fb84445475c392469
One potentially relevant detail I noticed is that `0000:00:04.1` maps to `\_SB.PCI0.GP12` (`_ADR = 0x00040001`).
Its `_DSD` advertises `HotPlugSupportInD3 = 1` and associates it with `\_SB.PCI0.GP19.NHI1` as USB4 port 2.
The NHI1 power-down path also references GP12 and appears to contain explicit handling for PCIe `[0:4:1]`.
Please let me know if you would like any additional traces captured while reproducing the failure.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Monday, October 5, 2026 22:35
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Hi Freeman,
I have applied a patch to stop the toggling between suspended and active of the 00:04.1 (AMD TB Tunnel Port Hub) and the Barlow Ridge device on my test system. Just to better understand why you are not seeing that issue and I am, can I get a zip of:
sudo cp /sys/firmware/acpi/tables/DSDT /sys/firmware/acpi/tables/SSDT* /<tmp-dir>/
iasl -d /<tmp-dir>/DSDT /<tmp-dir>/SSDT* # decompile together so cross-refs resolve
The ASL may give us an idea of your original issue with the dock suspending and not recovering sub-devices...
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Thursday, October 1, 2026 1:28 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I tested this with my original workaround disabled and after a reboot.
The Kensington SD5000T5 was connected the entire time, and
0000:00:04.1 had power/control=auto.
I first monitored the sysfs runtime PM state directly. On my system,
0000:00:04.1 stayed consistently suspended rather than rapidly toggling between active and suspended.
I then traced the kernel runtime-PM events for 3 minutes, filtering for
0000:00:04.1 and 0000:6b:00.6. I enabled:
rpm:rpm_status
rpm:rpm_suspend
rpm:rpm_resume
rpm:rpm_idle
rpm:rpm_usage
rpm:rpm_return_int
There were no events for either device during the 3-minute trace.
At the end of the test, the states were:
0000:00:04.1
runtime_status = suspended
power_state = D3cold
0000:6b:00.6
runtime_status = active
power_state = D0
I am not seeing the active/suspended toggling on 0000:00:04.1 that you are seeing on your test system, at least under this configuration.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Thursday, October 1, 2026 22:54
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Do you see any toggling between suspended and active (mostly shows in sysfs as active but quickly and randomly toggles to different states) on the AMD HOST Bridge Tunnel (maybe 00:04.1)? It seems the Barlow Ridge controller is the cause of the toggling on my test system. I have tried this with 2 docks utilizing this controller and see that the Kensington SD5000T5 dock uses it also.
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Friday, September 25, 2026 10:49 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mario,
Yes. The laptop is already running BIOS 319, and I do not see a newer BIOS available from ASUS for this model.
BIOS 319 has also been installed on this laptop for over 1 year, the reproductions I reported were all done with this BIOS version.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Friday, September 25, 2026 23:24
To: Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 9/25/26 10:12, Freeman Z wrote:> Hi Mario, Alex and Mika,
>
> Sure. Attached is the exact .config used for my unmodified Linus
> v7.3-rc4 test that reproduces the failure.
>
> SHA256:
> 488899cc5a0b5f2de69466df2639e39769d40d90682f51690400399a549309c2
>
> This is the final .config used after make olddefconfig for the v7.3-rc4 test.
>
> The v7.3-rc4 delayed-rescan test that succeeded used the same configuration base.
> The patched kernel was distinguished with a different LOCALVERSION.
>
> Please let me know if there are any other platform or configuration
> details that would help align the reference-board setup.
>
Thanks. Can you also look for a BIOS update on your side from the vendor in case it ends up being something unique to their BIOS?
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-05 17:10 ` Freeman Z
@ 2026-10-06 14:33 ` Kovacs, Alexander
2026-10-06 14:37 ` Mario Limonciello
0 siblings, 1 reply; 40+ messages in thread
From: Kovacs, Alexander @ 2026-10-06 14:33 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
AMD General
Freeman,
Ok, regarding the 00:03.1 device, I am seeing that it is misnamed in the tables.
BIOS Bug Report: Thunderbolt/USB4 tunnel port `_DSD` misnamed `XDSD` (00:03.1 / NHI0 path)
But that more than like does not have any bearing on the root dock enumeration issue...
I am unable to create a case where I can replicate your fail on my test system yet.
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Monday, October 5, 2026 12:10 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I checked the PCI topology on this system.
This laptop has only one physical USB4-capable port, and I do not appear to have a 0000:00:03.1 device at all.
`lspci -nn -s 00:03.1` returns no device, and `/sys/bus/pci/devices/0000:00:03.1/` does not exist.
The relevant part of the PCI topology is:
00:03.0
00:04.0
00:04.1-[09-68]----00.0-[0a-68]--...
And 00:04.1 is reported as:
00:04.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD]
Family 19h USB4/Thunderbolt PCIe tunnel [1022:14ef]
All of my reproductions with the Kensington SD5000T5 have therefore been through the 00:04.1 path.
I do not currently have a second 00:03.1 path that I can test.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Tuesday, October 6, 2026 1:01
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Sorry if this is a repeat question, this (non-returning sub-devices) happens if the dock is plugged on both the 00:03.1 & 00:04.1 path, correct?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Monday, October 5, 2026 10:39 AM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Sure. Attached is the ACPI dump from my ASUS ROG Flow X13 GV302XV running BIOS 319.
I copied the DSDT and all SSDTs from `/sys/firmware/acpi/tables/` and decompiled them together with `iasl -d DSDT SSDT*` as requested.
The archive contains both the original AML tables and the resulting DSL files, along with the iasl output log.
SHA256:
9c2664d8927f2550d171860867f00fbebe161c18017cf58fb84445475c392469
One potentially relevant detail I noticed is that `0000:00:04.1` maps to `\_SB.PCI0.GP12` (`_ADR = 0x00040001`).
Its `_DSD` advertises `HotPlugSupportInD3 = 1` and associates it with `\_SB.PCI0.GP19.NHI1` as USB4 port 2.
The NHI1 power-down path also references GP12 and appears to contain explicit handling for PCIe `[0:4:1]`.
Please let me know if you would like any additional traces captured while reproducing the failure.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Monday, October 5, 2026 22:35
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Hi Freeman,
I have applied a patch to stop the toggling between suspended and active of the 00:04.1 (AMD TB Tunnel Port Hub) and the Barlow Ridge device on my test system. Just to better understand why you are not seeing that issue and I am, can I get a zip of:
sudo cp /sys/firmware/acpi/tables/DSDT /sys/firmware/acpi/tables/SSDT* /<tmp-dir>/
iasl -d /<tmp-dir>/DSDT /<tmp-dir>/SSDT* # decompile together so cross-refs resolve
The ASL may give us an idea of your original issue with the dock suspending and not recovering sub-devices...
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Thursday, October 1, 2026 1:28 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I tested this with my original workaround disabled and after a reboot.
The Kensington SD5000T5 was connected the entire time, and
0000:00:04.1 had power/control=auto.
I first monitored the sysfs runtime PM state directly. On my system,
0000:00:04.1 stayed consistently suspended rather than rapidly toggling between active and suspended.
I then traced the kernel runtime-PM events for 3 minutes, filtering for
0000:00:04.1 and 0000:6b:00.6. I enabled:
rpm:rpm_status
rpm:rpm_suspend
rpm:rpm_resume
rpm:rpm_idle
rpm:rpm_usage
rpm:rpm_return_int
There were no events for either device during the 3-minute trace.
At the end of the test, the states were:
0000:00:04.1
runtime_status = suspended
power_state = D3cold
0000:6b:00.6
runtime_status = active
power_state = D0
I am not seeing the active/suspended toggling on 0000:00:04.1 that you are seeing on your test system, at least under this configuration.
Thanks,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Thursday, October 1, 2026 22:54
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Do you see any toggling between suspended and active (mostly shows in sysfs as active but quickly and randomly toggles to different states) on the AMD HOST Bridge Tunnel (maybe 00:04.1)? It seems the Barlow Ridge controller is the cause of the toggling on my test system. I have tried this with 2 docks utilizing this controller and see that the Kensington SD5000T5 dock uses it also.
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Friday, September 25, 2026 10:49 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Mario,
Yes. The laptop is already running BIOS 319, and I do not see a newer BIOS available from ASUS for this model.
BIOS 319 has also been installed on this laptop for over 1 year, the reproductions I reported were all done with this BIOS version.
Thanks,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Friday, September 25, 2026 23:24
To: Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Kovacs, Alexander <Alexander.Kovacs@amd.com>; linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 9/25/26 10:12, Freeman Z wrote:> Hi Mario, Alex and Mika,
>
> Sure. Attached is the exact .config used for my unmodified Linus
> v7.3-rc4 test that reproduces the failure.
>
> SHA256:
> 488899cc5a0b5f2de69466df2639e39769d40d90682f51690400399a549309c2
>
> This is the final .config used after make olddefconfig for the v7.3-rc4 test.
>
> The v7.3-rc4 delayed-rescan test that succeeded used the same configuration base.
> The patched kernel was distinguished with a different LOCALVERSION.
>
> Please let me know if there are any other platform or configuration
> details that would help align the reference-board setup.
>
Thanks. Can you also look for a BIOS update on your side from the vendor in case it ends up being something unique to their BIOS?
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-06 14:33 ` Kovacs, Alexander
@ 2026-10-06 14:37 ` Mario Limonciello
2026-10-06 16:33 ` Freeman Z
0 siblings, 1 reply; 40+ messages in thread
From: Mario Limonciello @ 2026-10-06 14:37 UTC (permalink / raw)
To: Kovacs, Alexander, Freeman Z, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
On 10/6/26 09:33, Kovacs, Alexander wrote:
> AMD General
>
> Freeman,
>
> Ok, regarding the 00:03.1 device, I am seeing that it is misnamed in the tables.
>
> BIOS Bug Report: Thunderbolt/USB4 tunnel port `_DSD` misnamed `XDSD` (00:03.1 / NHI0 path)
>
> But that more than like does not have any bearing on the root dock enumeration issue...
>
> I am unable to create a case where I can replicate your fail on my test system yet.
>
_DSD -> XDSD is a strategy I've seen employed when someone wants to pick
up reference code but has a difference in their design (for example they
don't have a retimer connected to the second USB4 router and disabled
the IP.
I don't know for sure; but my guess this is a strategy to avoid
technical debt and mistakes when merging future reference code versions.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-06 14:37 ` Mario Limonciello
@ 2026-10-06 16:33 ` Freeman Z
2026-10-06 17:12 ` Kovacs, Alexander
0 siblings, 1 reply; 40+ messages in thread
From: Freeman Z @ 2026-10-06 16:33 UTC (permalink / raw)
To: Mario Limonciello, Kovacs, Alexander, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
[-- Attachment #1: Type: text/plain, Size: 5281 bytes --]
Hi Alex,
Thanks for checking the tables, and Mario, thanks for the explanation of
the _DSD -> XDSD rename.
That is consistent with the suggestion that the XDSD rename may be an
intentional way to keep an unused reference-code path disabled. This
GV302XV exposes only the 00:04.1 / NHI1 USB4 path, so the NHI0 XDSD issue
appears likely to be separate from the enumeration failure.
Since you haven't been able to reproduce the failure, these are the
conditions that seem to matter on my system:
1. Cold boot with the dock disconnected.
2. 00:04.1 power/control = auto, with both 00:04.1 and the NHI
(6b:00.6) runtime-suspended in D3cold before the dock is plugged in.
3. No PCI config-space access to the root port before the hot-plug.
A config-space access wakes 00:04.1; both the targeted 4-byte config
read in this capture and plain lspci in earlier tests caused
enumeration to proceed normally.
I captured a failing hot-plug under these conditions using:
kernel: 7.2.9-1-cachyos
BIOS: 319
The capture includes runtime-PM and PCI hotplug/link tracepoints,
pciehp / ACPI device-PM / Thunderbolt dynamic debug, and ACPI GPE and
/proc/interrupts snapshots before the plug, after the plug, and after
recovery.
A redacted archive is attached.
SHA256:
4d4d7f64aeb4a2bbd8e68cf221de2002ad427d3456fc8354c06f3d3760dad065
The relevant timeline from kernel.log is:
98.774
First observable hot-plug effect. The NHI begins resuming from
D3cold. IRQ 38 (00:08.3, PCIe PME / bwctrl) increased by one
between the snapshots, which is consistent with a PME wake through
the bridge hosting the NHI.
101.015 - 101.017
Thunderbolt PCIe Down and Up tunnel paths are activated.
101.017 - 135.664
00:04.1 remains suspended / D3cold.
The NHI remains active / D0.
09:00.0 remains absent.
No runtime-PM activity is recorded for 00:04.1.
IRQ 35 (00:04.1 PME/AER/pciehp) remains at zero.
None of the counted ACPI GPEs change.
135.664
The script performs only a 4-byte read from:
/sys/bus/pci/devices/0000:00:04.1/config
135.668
GP12 transitions from D3cold to D0.
135.681
pciehp reports:
Card present
Link Up
Its first link check after resume reports:
lnk_status = 0x3011
This has DLL Link Active set and no Link Training bit set.
135.808
09:00.0 [8086:5786] begins enumerating.
A full lspci scan was not needed.
So the PCIe tunnel is established while 00:04.1 remains in D3cold, and
a targeted config-space read of 00:04.1 alone resumes the port. pciehp
then immediately finds an active link and enumerates the downstream
hierarchy.
No wake of 00:04.1 was observed during the hot-plug window.
The kernel also logs:
Wakeup disabled by ACPI
for 00:04.1 on resume, so GP12 is ACPI wake-capable via _PRW.
There are two observations I cannot explain yet:
1. sci_not increased from 6 to 7 while gpe10, gpe_all, and sci
remained unchanged. The snapshots do not timestamp that increment,
so it cannot yet be tied to the dock insertion.
2. The final Root Status of 00:04.1, read after recovery, shows:
PME ReqID 0021, PMEStatus+ PMEPending+
0021 decodes to 00:04.1.
IRQ 35 was zero in all three interrupt snapshots. Since Root Status
was read only after recovery, I do not know when these PME bits
became set.
Best regards,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Tuesday, October 6, 2026 22:37
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 10/6/26 09:33, Kovacs, Alexander wrote:
> AMD General
>
> Freeman,
>
> Ok, regarding the 00:03.1 device, I am seeing that it is misnamed in the tables.
>
> BIOS Bug Report: Thunderbolt/USB4 tunnel port `_DSD` misnamed `XDSD` (00:03.1 / NHI0 path)
>
> But that more than like does not have any bearing on the root dock enumeration issue...
>
> I am unable to create a case where I can replicate your fail on my test system yet.
>
_DSD -> XDSD is a strategy I've seen employed when someone wants to pick
up reference code but has a difference in their design (for example they
don't have a retimer connected to the second USB4 router and disabled
the IP.
I don't know for sure; but my guess this is a strategy to avoid
technical debt and mistakes when merging future reference code versions.
[-- Attachment #2: GV302XV-SD5000T5-d3cold-capture-20261006-redacted.tar.gz --]
[-- Type: application/gzip, Size: 33194 bytes --]
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-06 16:33 ` Freeman Z
@ 2026-10-06 17:12 ` Kovacs, Alexander
2026-10-06 18:45 ` Freeman Z
0 siblings, 1 reply; 40+ messages in thread
From: Kovacs, Alexander @ 2026-10-06 17:12 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
AMD General
Freeman,
Great, thanks for the confirmation...
Can you try:
get the 00:04.1 into a suspended state
Run:
sudo watch -n1 cat /sys/firmware/acpi/interrupts/gpe10
Perform hotplug of dock
If gpe10 does not increment when the dock is plugged into the suspended port, that's proof the wake never fired - and it's likely the GPE-0x10 _E10 path. If it does tick but nothing enumerates, the miss is likely downstream (native/pciehp
side).
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 11:33 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Thanks for checking the tables, and Mario, thanks for the explanation of the _DSD -> XDSD rename.
That is consistent with the suggestion that the XDSD rename may be an intentional way to keep an unused reference-code path disabled. This GV302XV exposes only the 00:04.1 / NHI1 USB4 path, so the NHI0 XDSD issue appears likely to be separate from the enumeration failure.
Since you haven't been able to reproduce the failure, these are the conditions that seem to matter on my system:
1. Cold boot with the dock disconnected.
2. 00:04.1 power/control = auto, with both 00:04.1 and the NHI
(6b:00.6) runtime-suspended in D3cold before the dock is plugged in.
3. No PCI config-space access to the root port before the hot-plug.
A config-space access wakes 00:04.1; both the targeted 4-byte config
read in this capture and plain lspci in earlier tests caused
enumeration to proceed normally.
I captured a failing hot-plug under these conditions using:
kernel: 7.2.9-1-cachyos
BIOS: 319
The capture includes runtime-PM and PCI hotplug/link tracepoints, pciehp / ACPI device-PM / Thunderbolt dynamic debug, and ACPI GPE and /proc/interrupts snapshots before the plug, after the plug, and after recovery.
A redacted archive is attached.
SHA256:
4d4d7f64aeb4a2bbd8e68cf221de2002ad427d3456fc8354c06f3d3760dad065
The relevant timeline from kernel.log is:
98.774
First observable hot-plug effect. The NHI begins resuming from
D3cold. IRQ 38 (00:08.3, PCIe PME / bwctrl) increased by one
between the snapshots, which is consistent with a PME wake through
the bridge hosting the NHI.
101.015 - 101.017
Thunderbolt PCIe Down and Up tunnel paths are activated.
101.017 - 135.664
00:04.1 remains suspended / D3cold.
The NHI remains active / D0.
09:00.0 remains absent.
No runtime-PM activity is recorded for 00:04.1.
IRQ 35 (00:04.1 PME/AER/pciehp) remains at zero.
None of the counted ACPI GPEs change.
135.664
The script performs only a 4-byte read from:
/sys/bus/pci/devices/0000:00:04.1/config
135.668
GP12 transitions from D3cold to D0.
135.681
pciehp reports:
Card present
Link Up
Its first link check after resume reports:
lnk_status = 0x3011
This has DLL Link Active set and no Link Training bit set.
135.808
09:00.0 [8086:5786] begins enumerating.
A full lspci scan was not needed.
So the PCIe tunnel is established while 00:04.1 remains in D3cold, and a targeted config-space read of 00:04.1 alone resumes the port. pciehp then immediately finds an active link and enumerates the downstream hierarchy.
No wake of 00:04.1 was observed during the hot-plug window.
The kernel also logs:
Wakeup disabled by ACPI
for 00:04.1 on resume, so GP12 is ACPI wake-capable via _PRW.
There are two observations I cannot explain yet:
1. sci_not increased from 6 to 7 while gpe10, gpe_all, and sci
remained unchanged. The snapshots do not timestamp that increment,
so it cannot yet be tied to the dock insertion.
2. The final Root Status of 00:04.1, read after recovery, shows:
PME ReqID 0021, PMEStatus+ PMEPending+
0021 decodes to 00:04.1.
IRQ 35 was zero in all three interrupt snapshots. Since Root Status
was read only after recovery, I do not know when these PME bits
became set.
Best regards,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Tuesday, October 6, 2026 22:37
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 10/6/26 09:33, Kovacs, Alexander wrote:
> AMD General
>
> Freeman,
>
> Ok, regarding the 00:03.1 device, I am seeing that it is misnamed in the tables.
>
> BIOS Bug Report: Thunderbolt/USB4 tunnel port `_DSD` misnamed `XDSD`
> (00:03.1 / NHI0 path)
>
> But that more than like does not have any bearing on the root dock enumeration issue...
>
> I am unable to create a case where I can replicate your fail on my test system yet.
>
_DSD -> XDSD is a strategy I've seen employed when someone wants to pick up reference code but has a difference in their design (for example they don't have a retimer connected to the second USB4 router and disabled the IP.
I don't know for sure; but my guess this is a strategy to avoid technical debt and mistakes when merging future reference code versions.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-06 17:12 ` Kovacs, Alexander
@ 2026-10-06 18:45 ` Freeman Z
2026-10-06 19:18 ` Kovacs, Alexander
0 siblings, 1 reply; 40+ messages in thread
From: Freeman Z @ 2026-10-06 18:45 UTC (permalink / raw)
To: Kovacs, Alexander, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
[-- Attachment #1: Type: text/plain, Size: 9573 bytes --]
Hi Alex,
I reran the test with both 00:04.1 and the NHI in D3cold, polling the
ACPI counters and device states every ~200 ms.
I pressed Enter late, so the manual "DOCK PLUGGED" marker should be
ignored for timing. The first observable hot-plug effect was:
01:54:51.116
NHI: D3cold -> D0
sci_not: 8 -> 9
gpe10: unchanged at 27
Then:
01:54:54.083 gpe10/gpe_all/sci: 27 -> 29
01:54:55.152 gpe10/gpe_all/sci: 29 -> 31
Despite those GPE10 events, 00:04.1 remained suspended/D3cold and
09:00.0 remained absent through the end of the capture. IRQ 35 for
00:04.1 also remained at zero.
I went back through the ACPI tables and noticed that GPE 0x1A and
GPE 0x10 appear to be two distinct wake paths for GP12.
In SSDT17, GP12._PRW returns:
{ 0x1A, 0x04 }
and _GPE._L1A sends Device Wake notifications to GP12 and GP12.SWUS
(as well as the associated GP19/NHI devices) without checking PCIe
Root Status.
GPE 0x10 is different. In SSDT16, _GPE._E10 is the GPP PME dispatcher.
For GP12 it does:
If (\_GPE.ET12 != 0xFF)
{
\_GPE.ET12 =
(M017 (Zero, 0x04, One, 0x78, Zero, 0x18) >> 0x10)
if ET12 is 1 or 3:
Notify (\_SB.PCI0.GP12, 0x02)
}
For 00:04.1, offset 0x78 is the PCIe Root Status register
(PCIe capability at 0x58 + 0x20).
A GPE10 increment only shows that _E10 ran; it does not by itself
show that the GP12 branch saw PME Status set or that GP12 received the
Device Wake notification.
In the earlier full capture, GPE 0x1A remained at zero in all three
snapshots: before the plug, after the failed hot-plug, and after the
targeted config-space read. 00:04.1 remained in D3cold until that
targeted read, which immediately caused GP12 to transition to D0 and
the downstream hierarchy to enumerate.
GP12's _DSD also has HotPlugSupportInD3 = 1 and associates the port
with GP19.NHI1 / USB4 port 2.
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 1:12
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Great, thanks for the confirmation...
Can you try:
get the 00:04.1 into a suspended state
Run:
sudo watch -n1 cat /sys/firmware/acpi/interrupts/gpe10
Perform hotplug of dock
If gpe10 does not increment when the dock is plugged into the suspended port, that's proof the wake never fired - and it's likely the GPE-0x10 _E10 path. If it does tick but nothing enumerates, the miss is likely downstream (native/pciehp
side).
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 11:33 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Thanks for checking the tables, and Mario, thanks for the explanation of the _DSD -> XDSD rename.
That is consistent with the suggestion that the XDSD rename may be an intentional way to keep an unused reference-code path disabled. This GV302XV exposes only the 00:04.1 / NHI1 USB4 path, so the NHI0 XDSD issue appears likely to be separate from the enumeration failure.
Since you haven't been able to reproduce the failure, these are the conditions that seem to matter on my system:
1. Cold boot with the dock disconnected.
2. 00:04.1 power/control = auto, with both 00:04.1 and the NHI
(6b:00.6) runtime-suspended in D3cold before the dock is plugged in.
3. No PCI config-space access to the root port before the hot-plug.
A config-space access wakes 00:04.1; both the targeted 4-byte config
read in this capture and plain lspci in earlier tests caused
enumeration to proceed normally.
I captured a failing hot-plug under these conditions using:
kernel: 7.2.9-1-cachyos
BIOS: 319
The capture includes runtime-PM and PCI hotplug/link tracepoints, pciehp / ACPI device-PM / Thunderbolt dynamic debug, and ACPI GPE and /proc/interrupts snapshots before the plug, after the plug, and after recovery.
A redacted archive is attached.
SHA256:
4d4d7f64aeb4a2bbd8e68cf221de2002ad427d3456fc8354c06f3d3760dad065
The relevant timeline from kernel.log is:
98.774
First observable hot-plug effect. The NHI begins resuming from
D3cold. IRQ 38 (00:08.3, PCIe PME / bwctrl) increased by one
between the snapshots, which is consistent with a PME wake through
the bridge hosting the NHI.
101.015 - 101.017
Thunderbolt PCIe Down and Up tunnel paths are activated.
101.017 - 135.664
00:04.1 remains suspended / D3cold.
The NHI remains active / D0.
09:00.0 remains absent.
No runtime-PM activity is recorded for 00:04.1.
IRQ 35 (00:04.1 PME/AER/pciehp) remains at zero.
None of the counted ACPI GPEs change.
135.664
The script performs only a 4-byte read from:
/sys/bus/pci/devices/0000:00:04.1/config
135.668
GP12 transitions from D3cold to D0.
135.681
pciehp reports:
Card present
Link Up
Its first link check after resume reports:
lnk_status = 0x3011
This has DLL Link Active set and no Link Training bit set.
135.808
09:00.0 [8086:5786] begins enumerating.
A full lspci scan was not needed.
So the PCIe tunnel is established while 00:04.1 remains in D3cold, and a targeted config-space read of 00:04.1 alone resumes the port. pciehp then immediately finds an active link and enumerates the downstream hierarchy.
No wake of 00:04.1 was observed during the hot-plug window.
The kernel also logs:
Wakeup disabled by ACPI
for 00:04.1 on resume, so GP12 is ACPI wake-capable via _PRW.
There are two observations I cannot explain yet:
1. sci_not increased from 6 to 7 while gpe10, gpe_all, and sci
remained unchanged. The snapshots do not timestamp that increment,
so it cannot yet be tied to the dock insertion.
2. The final Root Status of 00:04.1, read after recovery, shows:
PME ReqID 0021, PMEStatus+ PMEPending+
0021 decodes to 00:04.1.
IRQ 35 was zero in all three interrupt snapshots. Since Root Status
was read only after recovery, I do not know when these PME bits
became set.
Best regards,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Tuesday, October 6, 2026 22:37
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 10/6/26 09:33, Kovacs, Alexander wrote:
> AMD General
>
> Freeman,
>
> Ok, regarding the 00:03.1 device, I am seeing that it is misnamed in the tables.
>
> BIOS Bug Report: Thunderbolt/USB4 tunnel port `_DSD` misnamed `XDSD`
> (00:03.1 / NHI0 path)
>
> But that more than like does not have any bearing on the root dock enumeration issue...
>
> I am unable to create a case where I can replicate your fail on my test system yet.
>
_DSD -> XDSD is a strategy I've seen employed when someone wants to pick up reference code but has a difference in their design (for example they don't have a retimer connected to the second USB4 router and disabled the IP.
I don't know for sure; but my guess this is a strategy to avoid technical debt and mistakes when merging future reference code versions.
[-- Attachment #2: gpe10-hotplug-20261007-015343.tar.gz --]
[-- Type: application/gzip, Size: 7753 bytes --]
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-06 18:45 ` Freeman Z
@ 2026-10-06 19:18 ` Kovacs, Alexander
2026-10-06 19:33 ` Freeman Z
2026-10-06 19:53 ` Kovacs, Alexander
0 siblings, 2 replies; 40+ messages in thread
From: Kovacs, Alexander @ 2026-10-06 19:18 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
AMD General
Freeman,
I'm confused, did /sys/firmware/acpi/interrupts/gpe10 increment on plug ?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 1:46 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I reran the test with both 00:04.1 and the NHI in D3cold, polling the ACPI counters and device states every ~200 ms.
I pressed Enter late, so the manual "DOCK PLUGGED" marker should be ignored for timing. The first observable hot-plug effect was:
01:54:51.116
NHI: D3cold -> D0
sci_not: 8 -> 9
gpe10: unchanged at 27
Then:
01:54:54.083 gpe10/gpe_all/sci: 27 -> 29
01:54:55.152 gpe10/gpe_all/sci: 29 -> 31
Despite those GPE10 events, 00:04.1 remained suspended/D3cold and
09:00.0 remained absent through the end of the capture. IRQ 35 for
00:04.1 also remained at zero.
I went back through the ACPI tables and noticed that GPE 0x1A and GPE 0x10 appear to be two distinct wake paths for GP12.
In SSDT17, GP12._PRW returns:
{ 0x1A, 0x04 }
and _GPE._L1A sends Device Wake notifications to GP12 and GP12.SWUS (as well as the associated GP19/NHI devices) without checking PCIe Root Status.
GPE 0x10 is different. In SSDT16, _GPE._E10 is the GPP PME dispatcher.
For GP12 it does:
If (\_GPE.ET12 != 0xFF)
{
\_GPE.ET12 =
(M017 (Zero, 0x04, One, 0x78, Zero, 0x18) >> 0x10)
if ET12 is 1 or 3:
Notify (\_SB.PCI0.GP12, 0x02)
}
For 00:04.1, offset 0x78 is the PCIe Root Status register (PCIe capability at 0x58 + 0x20).
A GPE10 increment only shows that _E10 ran; it does not by itself show that the GP12 branch saw PME Status set or that GP12 received the Device Wake notification.
In the earlier full capture, GPE 0x1A remained at zero in all three
snapshots: before the plug, after the failed hot-plug, and after the targeted config-space read. 00:04.1 remained in D3cold until that targeted read, which immediately caused GP12 to transition to D0 and the downstream hierarchy to enumerate.
GP12's _DSD also has HotPlugSupportInD3 = 1 and associates the port with GP19.NHI1 / USB4 port 2.
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 1:12
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Great, thanks for the confirmation...
Can you try:
get the 00:04.1 into a suspended state
Run:
sudo watch -n1 cat /sys/firmware/acpi/interrupts/gpe10
Perform hotplug of dock
If gpe10 does not increment when the dock is plugged into the suspended port, that's proof the wake never fired - and it's likely the GPE-0x10 _E10 path. If it does tick but nothing enumerates, the miss is likely downstream (native/pciehp
side).
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 11:33 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Thanks for checking the tables, and Mario, thanks for the explanation of the _DSD -> XDSD rename.
That is consistent with the suggestion that the XDSD rename may be an intentional way to keep an unused reference-code path disabled. This GV302XV exposes only the 00:04.1 / NHI1 USB4 path, so the NHI0 XDSD issue appears likely to be separate from the enumeration failure.
Since you haven't been able to reproduce the failure, these are the conditions that seem to matter on my system:
1. Cold boot with the dock disconnected.
2. 00:04.1 power/control = auto, with both 00:04.1 and the NHI
(6b:00.6) runtime-suspended in D3cold before the dock is plugged in.
3. No PCI config-space access to the root port before the hot-plug.
A config-space access wakes 00:04.1; both the targeted 4-byte config
read in this capture and plain lspci in earlier tests caused
enumeration to proceed normally.
I captured a failing hot-plug under these conditions using:
kernel: 7.2.9-1-cachyos
BIOS: 319
The capture includes runtime-PM and PCI hotplug/link tracepoints, pciehp / ACPI device-PM / Thunderbolt dynamic debug, and ACPI GPE and /proc/interrupts snapshots before the plug, after the plug, and after recovery.
A redacted archive is attached.
SHA256:
4d4d7f64aeb4a2bbd8e68cf221de2002ad427d3456fc8354c06f3d3760dad065
The relevant timeline from kernel.log is:
98.774
First observable hot-plug effect. The NHI begins resuming from
D3cold. IRQ 38 (00:08.3, PCIe PME / bwctrl) increased by one
between the snapshots, which is consistent with a PME wake through
the bridge hosting the NHI.
101.015 - 101.017
Thunderbolt PCIe Down and Up tunnel paths are activated.
101.017 - 135.664
00:04.1 remains suspended / D3cold.
The NHI remains active / D0.
09:00.0 remains absent.
No runtime-PM activity is recorded for 00:04.1.
IRQ 35 (00:04.1 PME/AER/pciehp) remains at zero.
None of the counted ACPI GPEs change.
135.664
The script performs only a 4-byte read from:
/sys/bus/pci/devices/0000:00:04.1/config
135.668
GP12 transitions from D3cold to D0.
135.681
pciehp reports:
Card present
Link Up
Its first link check after resume reports:
lnk_status = 0x3011
This has DLL Link Active set and no Link Training bit set.
135.808
09:00.0 [8086:5786] begins enumerating.
A full lspci scan was not needed.
So the PCIe tunnel is established while 00:04.1 remains in D3cold, and a targeted config-space read of 00:04.1 alone resumes the port. pciehp then immediately finds an active link and enumerates the downstream hierarchy.
No wake of 00:04.1 was observed during the hot-plug window.
The kernel also logs:
Wakeup disabled by ACPI
for 00:04.1 on resume, so GP12 is ACPI wake-capable via _PRW.
There are two observations I cannot explain yet:
1. sci_not increased from 6 to 7 while gpe10, gpe_all, and sci
remained unchanged. The snapshots do not timestamp that increment,
so it cannot yet be tied to the dock insertion.
2. The final Root Status of 00:04.1, read after recovery, shows:
PME ReqID 0021, PMEStatus+ PMEPending+
0021 decodes to 00:04.1.
IRQ 35 was zero in all three interrupt snapshots. Since Root Status
was read only after recovery, I do not know when these PME bits
became set.
Best regards,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Tuesday, October 6, 2026 22:37
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 10/6/26 09:33, Kovacs, Alexander wrote:
> AMD General
>
> Freeman,
>
> Ok, regarding the 00:03.1 device, I am seeing that it is misnamed in the tables.
>
> BIOS Bug Report: Thunderbolt/USB4 tunnel port `_DSD` misnamed `XDSD`
> (00:03.1 / NHI0 path)
>
> But that more than like does not have any bearing on the root dock enumeration issue...
>
> I am unable to create a case where I can replicate your fail on my test system yet.
>
_DSD -> XDSD is a strategy I've seen employed when someone wants to pick up reference code but has a difference in their design (for example they don't have a retimer connected to the second USB4 router and disabled the IP.
I don't know for sure; but my guess this is a strategy to avoid technical debt and mistakes when merging future reference code versions.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-06 19:18 ` Kovacs, Alexander
@ 2026-10-06 19:33 ` Freeman Z
2026-10-06 19:53 ` Kovacs, Alexander
1 sibling, 0 replies; 40+ messages in thread
From: Freeman Z @ 2026-10-06 19:33 UTC (permalink / raw)
To: Kovacs, Alexander, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
Hi Alex,
Sorry for the confusion.
gpe10 had not incremented at the first observable hot-plug event.
In recent run 2 (gpe10-hotplug-20261007-015343), sampled every ~200 ms:
01:54:50.903 gpe10=27 NHI=suspended/D3cold 00:04.1=suspended/D3cold
01:54:51.116 gpe10=27 NHI=active/D0 00:04.1=suspended/D3cold
^ first observable hot-plug effect
01:54:54.083 gpe10=29 00:04.1=suspended/D3cold
01:54:55.152 gpe10=31 00:04.1=suspended/D3cold
01:55:33.648 gpe10=31 00:04.1=suspended/D3cold
09:00.0 still absent
gpe10 increased by 4 total, in two +2 steps, starting about 3 seconds
after the first observable hot-plug effect. 00:04.1 never woke up.
In run 1 (the earlier full capture, d3cold-capture-20261006-232936),
gpe10 stayed at 27 before the hot-plug, about 37 seconds after it,
and after the targeted recovery. It did not increment at all in that run.
The two runs differ: run 1 had no gpe10 activity, while run 2 had
delayed gpe10 activity a few seconds after the hot-plug.
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 3:18
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
I'm confused, did /sys/firmware/acpi/interrupts/gpe10 increment on plug ?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 1:46 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I reran the test with both 00:04.1 and the NHI in D3cold, polling the ACPI counters and device states every ~200 ms.
I pressed Enter late, so the manual "DOCK PLUGGED" marker should be ignored for timing. The first observable hot-plug effect was:
01:54:51.116
NHI: D3cold -> D0
sci_not: 8 -> 9
gpe10: unchanged at 27
Then:
01:54:54.083 gpe10/gpe_all/sci: 27 -> 29
01:54:55.152 gpe10/gpe_all/sci: 29 -> 31
Despite those GPE10 events, 00:04.1 remained suspended/D3cold and
09:00.0 remained absent through the end of the capture. IRQ 35 for
00:04.1 also remained at zero.
I went back through the ACPI tables and noticed that GPE 0x1A and GPE 0x10 appear to be two distinct wake paths for GP12.
In SSDT17, GP12._PRW returns:
{ 0x1A, 0x04 }
and _GPE._L1A sends Device Wake notifications to GP12 and GP12.SWUS (as well as the associated GP19/NHI devices) without checking PCIe Root Status.
GPE 0x10 is different. In SSDT16, _GPE._E10 is the GPP PME dispatcher.
For GP12 it does:
If (\_GPE.ET12 != 0xFF)
{
\_GPE.ET12 =
(M017 (Zero, 0x04, One, 0x78, Zero, 0x18) >> 0x10)
if ET12 is 1 or 3:
Notify (\_SB.PCI0.GP12, 0x02)
}
For 00:04.1, offset 0x78 is the PCIe Root Status register (PCIe capability at 0x58 + 0x20).
A GPE10 increment only shows that _E10 ran; it does not by itself show that the GP12 branch saw PME Status set or that GP12 received the Device Wake notification.
In the earlier full capture, GPE 0x1A remained at zero in all three
snapshots: before the plug, after the failed hot-plug, and after the targeted config-space read. 00:04.1 remained in D3cold until that targeted read, which immediately caused GP12 to transition to D0 and the downstream hierarchy to enumerate.
GP12's _DSD also has HotPlugSupportInD3 = 1 and associates the port with GP19.NHI1 / USB4 port 2.
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 1:12
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Great, thanks for the confirmation...
Can you try:
get the 00:04.1 into a suspended state
Run:
sudo watch -n1 cat /sys/firmware/acpi/interrupts/gpe10
Perform hotplug of dock
If gpe10 does not increment when the dock is plugged into the suspended port, that's proof the wake never fired - and it's likely the GPE-0x10 _E10 path. If it does tick but nothing enumerates, the miss is likely downstream (native/pciehp
side).
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 11:33 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Thanks for checking the tables, and Mario, thanks for the explanation of the _DSD -> XDSD rename.
That is consistent with the suggestion that the XDSD rename may be an intentional way to keep an unused reference-code path disabled. This GV302XV exposes only the 00:04.1 / NHI1 USB4 path, so the NHI0 XDSD issue appears likely to be separate from the enumeration failure.
Since you haven't been able to reproduce the failure, these are the conditions that seem to matter on my system:
1. Cold boot with the dock disconnected.
2. 00:04.1 power/control = auto, with both 00:04.1 and the NHI
(6b:00.6) runtime-suspended in D3cold before the dock is plugged in.
3. No PCI config-space access to the root port before the hot-plug.
A config-space access wakes 00:04.1; both the targeted 4-byte config
read in this capture and plain lspci in earlier tests caused
enumeration to proceed normally.
I captured a failing hot-plug under these conditions using:
kernel: 7.2.9-1-cachyos
BIOS: 319
The capture includes runtime-PM and PCI hotplug/link tracepoints, pciehp / ACPI device-PM / Thunderbolt dynamic debug, and ACPI GPE and /proc/interrupts snapshots before the plug, after the plug, and after recovery.
A redacted archive is attached.
SHA256:
4d4d7f64aeb4a2bbd8e68cf221de2002ad427d3456fc8354c06f3d3760dad065
The relevant timeline from kernel.log is:
98.774
First observable hot-plug effect. The NHI begins resuming from
D3cold. IRQ 38 (00:08.3, PCIe PME / bwctrl) increased by one
between the snapshots, which is consistent with a PME wake through
the bridge hosting the NHI.
101.015 - 101.017
Thunderbolt PCIe Down and Up tunnel paths are activated.
101.017 - 135.664
00:04.1 remains suspended / D3cold.
The NHI remains active / D0.
09:00.0 remains absent.
No runtime-PM activity is recorded for 00:04.1.
IRQ 35 (00:04.1 PME/AER/pciehp) remains at zero.
None of the counted ACPI GPEs change.
135.664
The script performs only a 4-byte read from:
/sys/bus/pci/devices/0000:00:04.1/config
135.668
GP12 transitions from D3cold to D0.
135.681
pciehp reports:
Card present
Link Up
Its first link check after resume reports:
lnk_status = 0x3011
This has DLL Link Active set and no Link Training bit set.
135.808
09:00.0 [8086:5786] begins enumerating.
A full lspci scan was not needed.
So the PCIe tunnel is established while 00:04.1 remains in D3cold, and a targeted config-space read of 00:04.1 alone resumes the port. pciehp then immediately finds an active link and enumerates the downstream hierarchy.
No wake of 00:04.1 was observed during the hot-plug window.
The kernel also logs:
Wakeup disabled by ACPI
for 00:04.1 on resume, so GP12 is ACPI wake-capable via _PRW.
There are two observations I cannot explain yet:
1. sci_not increased from 6 to 7 while gpe10, gpe_all, and sci
remained unchanged. The snapshots do not timestamp that increment,
so it cannot yet be tied to the dock insertion.
2. The final Root Status of 00:04.1, read after recovery, shows:
PME ReqID 0021, PMEStatus+ PMEPending+
0021 decodes to 00:04.1.
IRQ 35 was zero in all three interrupt snapshots. Since Root Status
was read only after recovery, I do not know when these PME bits
became set.
Best regards,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Tuesday, October 6, 2026 22:37
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 10/6/26 09:33, Kovacs, Alexander wrote:
> AMD General
>
> Freeman,
>
> Ok, regarding the 00:03.1 device, I am seeing that it is misnamed in the tables.
>
> BIOS Bug Report: Thunderbolt/USB4 tunnel port `_DSD` misnamed `XDSD`
> (00:03.1 / NHI0 path)
>
> But that more than like does not have any bearing on the root dock enumeration issue...
>
> I am unable to create a case where I can replicate your fail on my test system yet.
>
_DSD -> XDSD is a strategy I've seen employed when someone wants to pick up reference code but has a difference in their design (for example they don't have a retimer connected to the second USB4 router and disabled the IP.
I don't know for sure; but my guess this is a strategy to avoid technical debt and mistakes when merging future reference code versions.
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-06 19:18 ` Kovacs, Alexander
2026-10-06 19:33 ` Freeman Z
@ 2026-10-06 19:53 ` Kovacs, Alexander
2026-10-06 21:04 ` Freeman Z
1 sibling, 1 reply; 40+ messages in thread
From: Kovacs, Alexander @ 2026-10-06 19:53 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
AMD General
Freeman,
Thanks for the update. BTW can you try:
BEFORE plugging the dock
echo 0 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed
to see if the devices enumerate properly without the lspci. If they do can I get a log of the fail with echo 1 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed
and the pass with echo 0 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed ?
thanks!
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Kovacs, Alexander
Sent: Tuesday, October 6, 2026 2:18 PM
To: 'Freeman Z' <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Freeman,
I'm confused, did /sys/firmware/acpi/interrupts/gpe10 increment on plug ?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 1:46 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I reran the test with both 00:04.1 and the NHI in D3cold, polling the ACPI counters and device states every ~200 ms.
I pressed Enter late, so the manual "DOCK PLUGGED" marker should be ignored for timing. The first observable hot-plug effect was:
01:54:51.116
NHI: D3cold -> D0
sci_not: 8 -> 9
gpe10: unchanged at 27
Then:
01:54:54.083 gpe10/gpe_all/sci: 27 -> 29
01:54:55.152 gpe10/gpe_all/sci: 29 -> 31
Despite those GPE10 events, 00:04.1 remained suspended/D3cold and
09:00.0 remained absent through the end of the capture. IRQ 35 for
00:04.1 also remained at zero.
I went back through the ACPI tables and noticed that GPE 0x1A and GPE 0x10 appear to be two distinct wake paths for GP12.
In SSDT17, GP12._PRW returns:
{ 0x1A, 0x04 }
and _GPE._L1A sends Device Wake notifications to GP12 and GP12.SWUS (as well as the associated GP19/NHI devices) without checking PCIe Root Status.
GPE 0x10 is different. In SSDT16, _GPE._E10 is the GPP PME dispatcher.
For GP12 it does:
If (\_GPE.ET12 != 0xFF)
{
\_GPE.ET12 =
(M017 (Zero, 0x04, One, 0x78, Zero, 0x18) >> 0x10)
if ET12 is 1 or 3:
Notify (\_SB.PCI0.GP12, 0x02)
}
For 00:04.1, offset 0x78 is the PCIe Root Status register (PCIe capability at 0x58 + 0x20).
A GPE10 increment only shows that _E10 ran; it does not by itself show that the GP12 branch saw PME Status set or that GP12 received the Device Wake notification.
In the earlier full capture, GPE 0x1A remained at zero in all three
snapshots: before the plug, after the failed hot-plug, and after the targeted config-space read. 00:04.1 remained in D3cold until that targeted read, which immediately caused GP12 to transition to D0 and the downstream hierarchy to enumerate.
GP12's _DSD also has HotPlugSupportInD3 = 1 and associates the port with GP19.NHI1 / USB4 port 2.
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 1:12
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Great, thanks for the confirmation...
Can you try:
get the 00:04.1 into a suspended state
Run:
sudo watch -n1 cat /sys/firmware/acpi/interrupts/gpe10
Perform hotplug of dock
If gpe10 does not increment when the dock is plugged into the suspended port, that's proof the wake never fired - and it's likely the GPE-0x10 _E10 path. If it does tick but nothing enumerates, the miss is likely downstream (native/pciehp
side).
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 11:33 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Thanks for checking the tables, and Mario, thanks for the explanation of the _DSD -> XDSD rename.
That is consistent with the suggestion that the XDSD rename may be an intentional way to keep an unused reference-code path disabled. This GV302XV exposes only the 00:04.1 / NHI1 USB4 path, so the NHI0 XDSD issue appears likely to be separate from the enumeration failure.
Since you haven't been able to reproduce the failure, these are the conditions that seem to matter on my system:
1. Cold boot with the dock disconnected.
2. 00:04.1 power/control = auto, with both 00:04.1 and the NHI
(6b:00.6) runtime-suspended in D3cold before the dock is plugged in.
3. No PCI config-space access to the root port before the hot-plug.
A config-space access wakes 00:04.1; both the targeted 4-byte config
read in this capture and plain lspci in earlier tests caused
enumeration to proceed normally.
I captured a failing hot-plug under these conditions using:
kernel: 7.2.9-1-cachyos
BIOS: 319
The capture includes runtime-PM and PCI hotplug/link tracepoints, pciehp / ACPI device-PM / Thunderbolt dynamic debug, and ACPI GPE and /proc/interrupts snapshots before the plug, after the plug, and after recovery.
A redacted archive is attached.
SHA256:
4d4d7f64aeb4a2bbd8e68cf221de2002ad427d3456fc8354c06f3d3760dad065
The relevant timeline from kernel.log is:
98.774
First observable hot-plug effect. The NHI begins resuming from
D3cold. IRQ 38 (00:08.3, PCIe PME / bwctrl) increased by one
between the snapshots, which is consistent with a PME wake through
the bridge hosting the NHI.
101.015 - 101.017
Thunderbolt PCIe Down and Up tunnel paths are activated.
101.017 - 135.664
00:04.1 remains suspended / D3cold.
The NHI remains active / D0.
09:00.0 remains absent.
No runtime-PM activity is recorded for 00:04.1.
IRQ 35 (00:04.1 PME/AER/pciehp) remains at zero.
None of the counted ACPI GPEs change.
135.664
The script performs only a 4-byte read from:
/sys/bus/pci/devices/0000:00:04.1/config
135.668
GP12 transitions from D3cold to D0.
135.681
pciehp reports:
Card present
Link Up
Its first link check after resume reports:
lnk_status = 0x3011
This has DLL Link Active set and no Link Training bit set.
135.808
09:00.0 [8086:5786] begins enumerating.
A full lspci scan was not needed.
So the PCIe tunnel is established while 00:04.1 remains in D3cold, and a targeted config-space read of 00:04.1 alone resumes the port. pciehp then immediately finds an active link and enumerates the downstream hierarchy.
No wake of 00:04.1 was observed during the hot-plug window.
The kernel also logs:
Wakeup disabled by ACPI
for 00:04.1 on resume, so GP12 is ACPI wake-capable via _PRW.
There are two observations I cannot explain yet:
1. sci_not increased from 6 to 7 while gpe10, gpe_all, and sci
remained unchanged. The snapshots do not timestamp that increment,
so it cannot yet be tied to the dock insertion.
2. The final Root Status of 00:04.1, read after recovery, shows:
PME ReqID 0021, PMEStatus+ PMEPending+
0021 decodes to 00:04.1.
IRQ 35 was zero in all three interrupt snapshots. Since Root Status
was read only after recovery, I do not know when these PME bits
became set.
Best regards,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Tuesday, October 6, 2026 22:37
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 10/6/26 09:33, Kovacs, Alexander wrote:
> AMD General
>
> Freeman,
>
> Ok, regarding the 00:03.1 device, I am seeing that it is misnamed in the tables.
>
> BIOS Bug Report: Thunderbolt/USB4 tunnel port `_DSD` misnamed `XDSD`
> (00:03.1 / NHI0 path)
>
> But that more than like does not have any bearing on the root dock enumeration issue...
>
> I am unable to create a case where I can replicate your fail on my test system yet.
>
_DSD -> XDSD is a strategy I've seen employed when someone wants to pick up reference code but has a difference in their design (for example they don't have a retimer connected to the second USB4 router and disabled the IP.
I don't know for sure; but my guess this is a strategy to avoid technical debt and mistakes when merging future reference code versions.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-06 19:53 ` Kovacs, Alexander
@ 2026-10-06 21:04 ` Freeman Z
2026-10-09 12:47 ` Kovacs, Alexander
0 siblings, 1 reply; 40+ messages in thread
From: Freeman Z @ 2026-10-06 21:04 UTC (permalink / raw)
To: Kovacs, Alexander, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
[-- Attachment #1: Type: text/plain, Size: 14308 bytes --]
Hi Alex,
Yes, with d3cold_allowed=0 the dock enumerates without lspci.
Logs for both cases are attached. Each was taken in its own cold boot
with the dock unplugged at boot and the workaround disabled.
d3cold_allowed=0:
before hot-plug:
00:04.1 = suspended/D3hot
NHI = suspended/D3cold
09:00.0 = absent
result:
PASS - 09:00.0 enumerated naturally
d3cold_allowed=1:
before hot-plug:
00:04.1 = suspended/D3cold
NHI = suspended/D3cold
09:00.0 = absent
result:
FAIL - 00:04.1 remained suspended/D3cold and
09:00.0 never appeared
With d3cold_allowed=0:
gpe10: 27 -> 29 -> 31
gpe1A: remained 0
With d3cold_allowed=1:
gpe10: 23 -> 25 -> 27
gpe1A: remained 0
GPE10 incremented by four in both cases.
In the d3cold_allowed=0 run, the trace shows 00:04.1 receiving an
runtime-resume request shortly afterwards. It reaches D0, pciehp
immediately reports Card present / Link Up, and 09:00.0 then enumerates.
In the d3cold_allowed=1 run, GPE10 also increments, but there is no
runtime-resume event for 00:04.1 after the hot-plug. It remains in
D3cold for the rest of the capture and 09:00.0 remains absent.
IRQ 35 for 00:04.1 remained at zero in /proc/interrupts in both runs.
SHA256:
d3cold-allowed-0-20261007-041520.tar.gz
5e0af29245592916fb1682cc0bd3bedfcd75a1863d2d1bab0c2ab72bb14bc292
d3cold-allowed-1-20261007-041802.tar.gz
3f6e00600e65faf5fb5fd43f6d753c3900e6247500fe5f3297b6d23e25a0a8c4
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 3:53
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Thanks for the update. BTW can you try:
BEFORE plugging the dock
echo 0 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed
to see if the devices enumerate properly without the lspci. If they do can I get a log of the fail with echo 1 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed
and the pass with echo 0 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed ?
thanks!
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Kovacs, Alexander
Sent: Tuesday, October 6, 2026 2:18 PM
To: 'Freeman Z' <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Freeman,
I'm confused, did /sys/firmware/acpi/interrupts/gpe10 increment on plug ?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 1:46 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I reran the test with both 00:04.1 and the NHI in D3cold, polling the ACPI counters and device states every ~200 ms.
I pressed Enter late, so the manual "DOCK PLUGGED" marker should be ignored for timing. The first observable hot-plug effect was:
01:54:51.116
NHI: D3cold -> D0
sci_not: 8 -> 9
gpe10: unchanged at 27
Then:
01:54:54.083 gpe10/gpe_all/sci: 27 -> 29
01:54:55.152 gpe10/gpe_all/sci: 29 -> 31
Despite those GPE10 events, 00:04.1 remained suspended/D3cold and
09:00.0 remained absent through the end of the capture. IRQ 35 for
00:04.1 also remained at zero.
I went back through the ACPI tables and noticed that GPE 0x1A and GPE 0x10 appear to be two distinct wake paths for GP12.
In SSDT17, GP12._PRW returns:
{ 0x1A, 0x04 }
and _GPE._L1A sends Device Wake notifications to GP12 and GP12.SWUS (as well as the associated GP19/NHI devices) without checking PCIe Root Status.
GPE 0x10 is different. In SSDT16, _GPE._E10 is the GPP PME dispatcher.
For GP12 it does:
If (\_GPE.ET12 != 0xFF)
{
\_GPE.ET12 =
(M017 (Zero, 0x04, One, 0x78, Zero, 0x18) >> 0x10)
if ET12 is 1 or 3:
Notify (\_SB.PCI0.GP12, 0x02)
}
For 00:04.1, offset 0x78 is the PCIe Root Status register (PCIe capability at 0x58 + 0x20).
A GPE10 increment only shows that _E10 ran; it does not by itself show that the GP12 branch saw PME Status set or that GP12 received the Device Wake notification.
In the earlier full capture, GPE 0x1A remained at zero in all three
snapshots: before the plug, after the failed hot-plug, and after the targeted config-space read. 00:04.1 remained in D3cold until that targeted read, which immediately caused GP12 to transition to D0 and the downstream hierarchy to enumerate.
GP12's _DSD also has HotPlugSupportInD3 = 1 and associates the port with GP19.NHI1 / USB4 port 2.
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 1:12
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Great, thanks for the confirmation...
Can you try:
get the 00:04.1 into a suspended state
Run:
sudo watch -n1 cat /sys/firmware/acpi/interrupts/gpe10
Perform hotplug of dock
If gpe10 does not increment when the dock is plugged into the suspended port, that's proof the wake never fired - and it's likely the GPE-0x10 _E10 path. If it does tick but nothing enumerates, the miss is likely downstream (native/pciehp
side).
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 11:33 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Thanks for checking the tables, and Mario, thanks for the explanation of the _DSD -> XDSD rename.
That is consistent with the suggestion that the XDSD rename may be an intentional way to keep an unused reference-code path disabled. This GV302XV exposes only the 00:04.1 / NHI1 USB4 path, so the NHI0 XDSD issue appears likely to be separate from the enumeration failure.
Since you haven't been able to reproduce the failure, these are the conditions that seem to matter on my system:
1. Cold boot with the dock disconnected.
2. 00:04.1 power/control = auto, with both 00:04.1 and the NHI
(6b:00.6) runtime-suspended in D3cold before the dock is plugged in.
3. No PCI config-space access to the root port before the hot-plug.
A config-space access wakes 00:04.1; both the targeted 4-byte config
read in this capture and plain lspci in earlier tests caused
enumeration to proceed normally.
I captured a failing hot-plug under these conditions using:
kernel: 7.2.9-1-cachyos
BIOS: 319
The capture includes runtime-PM and PCI hotplug/link tracepoints, pciehp / ACPI device-PM / Thunderbolt dynamic debug, and ACPI GPE and /proc/interrupts snapshots before the plug, after the plug, and after recovery.
A redacted archive is attached.
SHA256:
4d4d7f64aeb4a2bbd8e68cf221de2002ad427d3456fc8354c06f3d3760dad065
The relevant timeline from kernel.log is:
98.774
First observable hot-plug effect. The NHI begins resuming from
D3cold. IRQ 38 (00:08.3, PCIe PME / bwctrl) increased by one
between the snapshots, which is consistent with a PME wake through
the bridge hosting the NHI.
101.015 - 101.017
Thunderbolt PCIe Down and Up tunnel paths are activated.
101.017 - 135.664
00:04.1 remains suspended / D3cold.
The NHI remains active / D0.
09:00.0 remains absent.
No runtime-PM activity is recorded for 00:04.1.
IRQ 35 (00:04.1 PME/AER/pciehp) remains at zero.
None of the counted ACPI GPEs change.
135.664
The script performs only a 4-byte read from:
/sys/bus/pci/devices/0000:00:04.1/config
135.668
GP12 transitions from D3cold to D0.
135.681
pciehp reports:
Card present
Link Up
Its first link check after resume reports:
lnk_status = 0x3011
This has DLL Link Active set and no Link Training bit set.
135.808
09:00.0 [8086:5786] begins enumerating.
A full lspci scan was not needed.
So the PCIe tunnel is established while 00:04.1 remains in D3cold, and a targeted config-space read of 00:04.1 alone resumes the port. pciehp then immediately finds an active link and enumerates the downstream hierarchy.
No wake of 00:04.1 was observed during the hot-plug window.
The kernel also logs:
Wakeup disabled by ACPI
for 00:04.1 on resume, so GP12 is ACPI wake-capable via _PRW.
There are two observations I cannot explain yet:
1. sci_not increased from 6 to 7 while gpe10, gpe_all, and sci
remained unchanged. The snapshots do not timestamp that increment,
so it cannot yet be tied to the dock insertion.
2. The final Root Status of 00:04.1, read after recovery, shows:
PME ReqID 0021, PMEStatus+ PMEPending+
0021 decodes to 00:04.1.
IRQ 35 was zero in all three interrupt snapshots. Since Root Status
was read only after recovery, I do not know when these PME bits
became set.
Best regards,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Tuesday, October 6, 2026 22:37
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 10/6/26 09:33, Kovacs, Alexander wrote:
> AMD General
>
> Freeman,
>
> Ok, regarding the 00:03.1 device, I am seeing that it is misnamed in the tables.
>
> BIOS Bug Report: Thunderbolt/USB4 tunnel port `_DSD` misnamed `XDSD`
> (00:03.1 / NHI0 path)
>
> But that more than like does not have any bearing on the root dock enumeration issue...
>
> I am unable to create a case where I can replicate your fail on my test system yet.
>
_DSD -> XDSD is a strategy I've seen employed when someone wants to pick up reference code but has a difference in their design (for example they don't have a retimer connected to the second USB4 router and disabled the IP.
I don't know for sure; but my guess this is a strategy to avoid technical debt and mistakes when merging future reference code versions.
[-- Attachment #2: d3cold-allowed-0-20261007-041520.tar.gz --]
[-- Type: application/gzip, Size: 19350 bytes --]
[-- Attachment #3: d3cold-allowed-1-20261007-041802.tar.gz --]
[-- Type: application/gzip, Size: 12946 bytes --]
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-06 21:04 ` Freeman Z
@ 2026-10-09 12:47 ` Kovacs, Alexander
2026-10-09 13:02 ` Freeman Z
0 siblings, 1 reply; 40+ messages in thread
From: Kovacs, Alexander @ 2026-10-09 12:47 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
AMD General
Freeman,
For clarity, the D3Cold Allowed set to 0 and 1 tests were on the Catchy OS ?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 4:04 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Yes, with d3cold_allowed=0 the dock enumerates without lspci.
Logs for both cases are attached. Each was taken in its own cold boot with the dock unplugged at boot and the workaround disabled.
d3cold_allowed=0:
before hot-plug:
00:04.1 = suspended/D3hot
NHI = suspended/D3cold
09:00.0 = absent
result:
PASS - 09:00.0 enumerated naturally
d3cold_allowed=1:
before hot-plug:
00:04.1 = suspended/D3cold
NHI = suspended/D3cold
09:00.0 = absent
result:
FAIL - 00:04.1 remained suspended/D3cold and
09:00.0 never appeared
With d3cold_allowed=0:
gpe10: 27 -> 29 -> 31
gpe1A: remained 0
With d3cold_allowed=1:
gpe10: 23 -> 25 -> 27
gpe1A: remained 0
GPE10 incremented by four in both cases.
In the d3cold_allowed=0 run, the trace shows 00:04.1 receiving an runtime-resume request shortly afterwards. It reaches D0, pciehp immediately reports Card present / Link Up, and 09:00.0 then enumerates.
In the d3cold_allowed=1 run, GPE10 also increments, but there is no runtime-resume event for 00:04.1 after the hot-plug. It remains in D3cold for the rest of the capture and 09:00.0 remains absent.
IRQ 35 for 00:04.1 remained at zero in /proc/interrupts in both runs.
SHA256:
d3cold-allowed-0-20261007-041520.tar.gz
5e0af29245592916fb1682cc0bd3bedfcd75a1863d2d1bab0c2ab72bb14bc292
d3cold-allowed-1-20261007-041802.tar.gz
3f6e00600e65faf5fb5fd43f6d753c3900e6247500fe5f3297b6d23e25a0a8c4
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 3:53
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Thanks for the update. BTW can you try:
BEFORE plugging the dock
echo 0 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed
to see if the devices enumerate properly without the lspci. If they do can I get a log of the fail with echo 1 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed
and the pass with echo 0 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed ?
thanks!
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Kovacs, Alexander
Sent: Tuesday, October 6, 2026 2:18 PM
To: 'Freeman Z' <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Freeman,
I'm confused, did /sys/firmware/acpi/interrupts/gpe10 increment on plug ?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 1:46 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I reran the test with both 00:04.1 and the NHI in D3cold, polling the ACPI counters and device states every ~200 ms.
I pressed Enter late, so the manual "DOCK PLUGGED" marker should be ignored for timing. The first observable hot-plug effect was:
01:54:51.116
NHI: D3cold -> D0
sci_not: 8 -> 9
gpe10: unchanged at 27
Then:
01:54:54.083 gpe10/gpe_all/sci: 27 -> 29
01:54:55.152 gpe10/gpe_all/sci: 29 -> 31
Despite those GPE10 events, 00:04.1 remained suspended/D3cold and
09:00.0 remained absent through the end of the capture. IRQ 35 for
00:04.1 also remained at zero.
I went back through the ACPI tables and noticed that GPE 0x1A and GPE 0x10 appear to be two distinct wake paths for GP12.
In SSDT17, GP12._PRW returns:
{ 0x1A, 0x04 }
and _GPE._L1A sends Device Wake notifications to GP12 and GP12.SWUS (as well as the associated GP19/NHI devices) without checking PCIe Root Status.
GPE 0x10 is different. In SSDT16, _GPE._E10 is the GPP PME dispatcher.
For GP12 it does:
If (\_GPE.ET12 != 0xFF)
{
\_GPE.ET12 =
(M017 (Zero, 0x04, One, 0x78, Zero, 0x18) >> 0x10)
if ET12 is 1 or 3:
Notify (\_SB.PCI0.GP12, 0x02)
}
For 00:04.1, offset 0x78 is the PCIe Root Status register (PCIe capability at 0x58 + 0x20).
A GPE10 increment only shows that _E10 ran; it does not by itself show that the GP12 branch saw PME Status set or that GP12 received the Device Wake notification.
In the earlier full capture, GPE 0x1A remained at zero in all three
snapshots: before the plug, after the failed hot-plug, and after the targeted config-space read. 00:04.1 remained in D3cold until that targeted read, which immediately caused GP12 to transition to D0 and the downstream hierarchy to enumerate.
GP12's _DSD also has HotPlugSupportInD3 = 1 and associates the port with GP19.NHI1 / USB4 port 2.
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 1:12
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Great, thanks for the confirmation...
Can you try:
get the 00:04.1 into a suspended state
Run:
sudo watch -n1 cat /sys/firmware/acpi/interrupts/gpe10
Perform hotplug of dock
If gpe10 does not increment when the dock is plugged into the suspended port, that's proof the wake never fired - and it's likely the GPE-0x10 _E10 path. If it does tick but nothing enumerates, the miss is likely downstream (native/pciehp
side).
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 11:33 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Thanks for checking the tables, and Mario, thanks for the explanation of the _DSD -> XDSD rename.
That is consistent with the suggestion that the XDSD rename may be an intentional way to keep an unused reference-code path disabled. This GV302XV exposes only the 00:04.1 / NHI1 USB4 path, so the NHI0 XDSD issue appears likely to be separate from the enumeration failure.
Since you haven't been able to reproduce the failure, these are the conditions that seem to matter on my system:
1. Cold boot with the dock disconnected.
2. 00:04.1 power/control = auto, with both 00:04.1 and the NHI
(6b:00.6) runtime-suspended in D3cold before the dock is plugged in.
3. No PCI config-space access to the root port before the hot-plug.
A config-space access wakes 00:04.1; both the targeted 4-byte config
read in this capture and plain lspci in earlier tests caused
enumeration to proceed normally.
I captured a failing hot-plug under these conditions using:
kernel: 7.2.9-1-cachyos
BIOS: 319
The capture includes runtime-PM and PCI hotplug/link tracepoints, pciehp / ACPI device-PM / Thunderbolt dynamic debug, and ACPI GPE and /proc/interrupts snapshots before the plug, after the plug, and after recovery.
A redacted archive is attached.
SHA256:
4d4d7f64aeb4a2bbd8e68cf221de2002ad427d3456fc8354c06f3d3760dad065
The relevant timeline from kernel.log is:
98.774
First observable hot-plug effect. The NHI begins resuming from
D3cold. IRQ 38 (00:08.3, PCIe PME / bwctrl) increased by one
between the snapshots, which is consistent with a PME wake through
the bridge hosting the NHI.
101.015 - 101.017
Thunderbolt PCIe Down and Up tunnel paths are activated.
101.017 - 135.664
00:04.1 remains suspended / D3cold.
The NHI remains active / D0.
09:00.0 remains absent.
No runtime-PM activity is recorded for 00:04.1.
IRQ 35 (00:04.1 PME/AER/pciehp) remains at zero.
None of the counted ACPI GPEs change.
135.664
The script performs only a 4-byte read from:
/sys/bus/pci/devices/0000:00:04.1/config
135.668
GP12 transitions from D3cold to D0.
135.681
pciehp reports:
Card present
Link Up
Its first link check after resume reports:
lnk_status = 0x3011
This has DLL Link Active set and no Link Training bit set.
135.808
09:00.0 [8086:5786] begins enumerating.
A full lspci scan was not needed.
So the PCIe tunnel is established while 00:04.1 remains in D3cold, and a targeted config-space read of 00:04.1 alone resumes the port. pciehp then immediately finds an active link and enumerates the downstream hierarchy.
No wake of 00:04.1 was observed during the hot-plug window.
The kernel also logs:
Wakeup disabled by ACPI
for 00:04.1 on resume, so GP12 is ACPI wake-capable via _PRW.
There are two observations I cannot explain yet:
1. sci_not increased from 6 to 7 while gpe10, gpe_all, and sci
remained unchanged. The snapshots do not timestamp that increment,
so it cannot yet be tied to the dock insertion.
2. The final Root Status of 00:04.1, read after recovery, shows:
PME ReqID 0021, PMEStatus+ PMEPending+
0021 decodes to 00:04.1.
IRQ 35 was zero in all three interrupt snapshots. Since Root Status
was read only after recovery, I do not know when these PME bits
became set.
Best regards,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Tuesday, October 6, 2026 22:37
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 10/6/26 09:33, Kovacs, Alexander wrote:
> AMD General
>
> Freeman,
>
> Ok, regarding the 00:03.1 device, I am seeing that it is misnamed in the tables.
>
> BIOS Bug Report: Thunderbolt/USB4 tunnel port `_DSD` misnamed `XDSD`
> (00:03.1 / NHI0 path)
>
> But that more than like does not have any bearing on the root dock enumeration issue...
>
> I am unable to create a case where I can replicate your fail on my test system yet.
>
_DSD -> XDSD is a strategy I've seen employed when someone wants to pick up reference code but has a difference in their design (for example they don't have a retimer connected to the second USB4 router and disabled the IP.
I don't know for sure; but my guess this is a strategy to avoid technical debt and mistakes when merging future reference code versions.
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-09 12:47 ` Kovacs, Alexander
@ 2026-10-09 13:02 ` Freeman Z
2026-10-09 13:39 ` Kovacs, Alexander
0 siblings, 1 reply; 40+ messages in thread
From: Freeman Z @ 2026-10-09 13:02 UTC (permalink / raw)
To: Kovacs, Alexander, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
Hi Alex,
Yes, both tests were performed on CachyOS.
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Friday, October 9, 2026 20:47
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
For clarity, the D3Cold Allowed set to 0 and 1 tests were on the Catchy OS ?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 4:04 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Yes, with d3cold_allowed=0 the dock enumerates without lspci.
Logs for both cases are attached. Each was taken in its own cold boot with the dock unplugged at boot and the workaround disabled.
d3cold_allowed=0:
before hot-plug:
00:04.1 = suspended/D3hot
NHI = suspended/D3cold
09:00.0 = absent
result:
PASS - 09:00.0 enumerated naturally
d3cold_allowed=1:
before hot-plug:
00:04.1 = suspended/D3cold
NHI = suspended/D3cold
09:00.0 = absent
result:
FAIL - 00:04.1 remained suspended/D3cold and
09:00.0 never appeared
With d3cold_allowed=0:
gpe10: 27 -> 29 -> 31
gpe1A: remained 0
With d3cold_allowed=1:
gpe10: 23 -> 25 -> 27
gpe1A: remained 0
GPE10 incremented by four in both cases.
In the d3cold_allowed=0 run, the trace shows 00:04.1 receiving an runtime-resume request shortly afterwards. It reaches D0, pciehp immediately reports Card present / Link Up, and 09:00.0 then enumerates.
In the d3cold_allowed=1 run, GPE10 also increments, but there is no runtime-resume event for 00:04.1 after the hot-plug. It remains in D3cold for the rest of the capture and 09:00.0 remains absent.
IRQ 35 for 00:04.1 remained at zero in /proc/interrupts in both runs.
SHA256:
d3cold-allowed-0-20261007-041520.tar.gz
5e0af29245592916fb1682cc0bd3bedfcd75a1863d2d1bab0c2ab72bb14bc292
d3cold-allowed-1-20261007-041802.tar.gz
3f6e00600e65faf5fb5fd43f6d753c3900e6247500fe5f3297b6d23e25a0a8c4
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 3:53
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Thanks for the update. BTW can you try:
BEFORE plugging the dock
echo 0 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed
to see if the devices enumerate properly without the lspci. If they do can I get a log of the fail with echo 1 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed
and the pass with echo 0 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed ?
thanks!
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Kovacs, Alexander
Sent: Tuesday, October 6, 2026 2:18 PM
To: 'Freeman Z' <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Freeman,
I'm confused, did /sys/firmware/acpi/interrupts/gpe10 increment on plug ?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 1:46 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I reran the test with both 00:04.1 and the NHI in D3cold, polling the ACPI counters and device states every ~200 ms.
I pressed Enter late, so the manual "DOCK PLUGGED" marker should be ignored for timing. The first observable hot-plug effect was:
01:54:51.116
NHI: D3cold -> D0
sci_not: 8 -> 9
gpe10: unchanged at 27
Then:
01:54:54.083 gpe10/gpe_all/sci: 27 -> 29
01:54:55.152 gpe10/gpe_all/sci: 29 -> 31
Despite those GPE10 events, 00:04.1 remained suspended/D3cold and
09:00.0 remained absent through the end of the capture. IRQ 35 for
00:04.1 also remained at zero.
I went back through the ACPI tables and noticed that GPE 0x1A and GPE 0x10 appear to be two distinct wake paths for GP12.
In SSDT17, GP12._PRW returns:
{ 0x1A, 0x04 }
and _GPE._L1A sends Device Wake notifications to GP12 and GP12.SWUS (as well as the associated GP19/NHI devices) without checking PCIe Root Status.
GPE 0x10 is different. In SSDT16, _GPE._E10 is the GPP PME dispatcher.
For GP12 it does:
If (\_GPE.ET12 != 0xFF)
{
\_GPE.ET12 =
(M017 (Zero, 0x04, One, 0x78, Zero, 0x18) >> 0x10)
if ET12 is 1 or 3:
Notify (\_SB.PCI0.GP12, 0x02)
}
For 00:04.1, offset 0x78 is the PCIe Root Status register (PCIe capability at 0x58 + 0x20).
A GPE10 increment only shows that _E10 ran; it does not by itself show that the GP12 branch saw PME Status set or that GP12 received the Device Wake notification.
In the earlier full capture, GPE 0x1A remained at zero in all three
snapshots: before the plug, after the failed hot-plug, and after the targeted config-space read. 00:04.1 remained in D3cold until that targeted read, which immediately caused GP12 to transition to D0 and the downstream hierarchy to enumerate.
GP12's _DSD also has HotPlugSupportInD3 = 1 and associates the port with GP19.NHI1 / USB4 port 2.
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 1:12
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Great, thanks for the confirmation...
Can you try:
get the 00:04.1 into a suspended state
Run:
sudo watch -n1 cat /sys/firmware/acpi/interrupts/gpe10
Perform hotplug of dock
If gpe10 does not increment when the dock is plugged into the suspended port, that's proof the wake never fired - and it's likely the GPE-0x10 _E10 path. If it does tick but nothing enumerates, the miss is likely downstream (native/pciehp
side).
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 11:33 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Thanks for checking the tables, and Mario, thanks for the explanation of the _DSD -> XDSD rename.
That is consistent with the suggestion that the XDSD rename may be an intentional way to keep an unused reference-code path disabled. This GV302XV exposes only the 00:04.1 / NHI1 USB4 path, so the NHI0 XDSD issue appears likely to be separate from the enumeration failure.
Since you haven't been able to reproduce the failure, these are the conditions that seem to matter on my system:
1. Cold boot with the dock disconnected.
2. 00:04.1 power/control = auto, with both 00:04.1 and the NHI
(6b:00.6) runtime-suspended in D3cold before the dock is plugged in.
3. No PCI config-space access to the root port before the hot-plug.
A config-space access wakes 00:04.1; both the targeted 4-byte config
read in this capture and plain lspci in earlier tests caused
enumeration to proceed normally.
I captured a failing hot-plug under these conditions using:
kernel: 7.2.9-1-cachyos
BIOS: 319
The capture includes runtime-PM and PCI hotplug/link tracepoints, pciehp / ACPI device-PM / Thunderbolt dynamic debug, and ACPI GPE and /proc/interrupts snapshots before the plug, after the plug, and after recovery.
A redacted archive is attached.
SHA256:
4d4d7f64aeb4a2bbd8e68cf221de2002ad427d3456fc8354c06f3d3760dad065
The relevant timeline from kernel.log is:
98.774
First observable hot-plug effect. The NHI begins resuming from
D3cold. IRQ 38 (00:08.3, PCIe PME / bwctrl) increased by one
between the snapshots, which is consistent with a PME wake through
the bridge hosting the NHI.
101.015 - 101.017
Thunderbolt PCIe Down and Up tunnel paths are activated.
101.017 - 135.664
00:04.1 remains suspended / D3cold.
The NHI remains active / D0.
09:00.0 remains absent.
No runtime-PM activity is recorded for 00:04.1.
IRQ 35 (00:04.1 PME/AER/pciehp) remains at zero.
None of the counted ACPI GPEs change.
135.664
The script performs only a 4-byte read from:
/sys/bus/pci/devices/0000:00:04.1/config
135.668
GP12 transitions from D3cold to D0.
135.681
pciehp reports:
Card present
Link Up
Its first link check after resume reports:
lnk_status = 0x3011
This has DLL Link Active set and no Link Training bit set.
135.808
09:00.0 [8086:5786] begins enumerating.
A full lspci scan was not needed.
So the PCIe tunnel is established while 00:04.1 remains in D3cold, and a targeted config-space read of 00:04.1 alone resumes the port. pciehp then immediately finds an active link and enumerates the downstream hierarchy.
No wake of 00:04.1 was observed during the hot-plug window.
The kernel also logs:
Wakeup disabled by ACPI
for 00:04.1 on resume, so GP12 is ACPI wake-capable via _PRW.
There are two observations I cannot explain yet:
1. sci_not increased from 6 to 7 while gpe10, gpe_all, and sci
remained unchanged. The snapshots do not timestamp that increment,
so it cannot yet be tied to the dock insertion.
2. The final Root Status of 00:04.1, read after recovery, shows:
PME ReqID 0021, PMEStatus+ PMEPending+
0021 decodes to 00:04.1.
IRQ 35 was zero in all three interrupt snapshots. Since Root Status
was read only after recovery, I do not know when these PME bits
became set.
Best regards,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Tuesday, October 6, 2026 22:37
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 10/6/26 09:33, Kovacs, Alexander wrote:
> AMD General
>
> Freeman,
>
> Ok, regarding the 00:03.1 device, I am seeing that it is misnamed in the tables.
>
> BIOS Bug Report: Thunderbolt/USB4 tunnel port `_DSD` misnamed `XDSD`
> (00:03.1 / NHI0 path)
>
> But that more than like does not have any bearing on the root dock enumeration issue...
>
> I am unable to create a case where I can replicate your fail on my test system yet.
>
_DSD -> XDSD is a strategy I've seen employed when someone wants to pick up reference code but has a difference in their design (for example they don't have a retimer connected to the second USB4 router and disabled the IP.
I don't know for sure; but my guess this is a strategy to avoid technical debt and mistakes when merging future reference code versions.
^ permalink raw reply [flat|nested] 40+ messages in thread
* RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
2026-10-09 13:02 ` Freeman Z
@ 2026-10-09 13:39 ` Kovacs, Alexander
0 siblings, 0 replies; 40+ messages in thread
From: Kovacs, Alexander @ 2026-10-09 13:39 UTC (permalink / raw)
To: Freeman Z, Limonciello, Mario, Mika Westerberg
Cc: linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
bhelgaas@google.com, westeri@kernel.org, andreas.noever@gmail.com,
YehezkelShB@gmail.com, rafael@kernel.org,
linux-pm@vger.kernel.org, S, Sanath, Natikar, Basavaraj,
Martinez, Juan, Chia-Lin Kao (AceLan)
[-- Attachment #1: Type: text/plain, Size: 17456 bytes --]
AMD General
Freeman,
I have attached a modified version of your capture script, please return the 0 & 1 logs of the attempted plug actions.
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Friday, October 9, 2026 8:03 AM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Yes, both tests were performed on CachyOS.
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Friday, October 9, 2026 20:47
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
For clarity, the D3Cold Allowed set to 0 and 1 tests were on the Catchy OS ?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 4:04 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Yes, with d3cold_allowed=0 the dock enumerates without lspci.
Logs for both cases are attached. Each was taken in its own cold boot with the dock unplugged at boot and the workaround disabled.
d3cold_allowed=0:
before hot-plug:
00:04.1 = suspended/D3hot
NHI = suspended/D3cold
09:00.0 = absent
result:
PASS - 09:00.0 enumerated naturally
d3cold_allowed=1:
before hot-plug:
00:04.1 = suspended/D3cold
NHI = suspended/D3cold
09:00.0 = absent
result:
FAIL - 00:04.1 remained suspended/D3cold and
09:00.0 never appeared
With d3cold_allowed=0:
gpe10: 27 -> 29 -> 31
gpe1A: remained 0
With d3cold_allowed=1:
gpe10: 23 -> 25 -> 27
gpe1A: remained 0
GPE10 incremented by four in both cases.
In the d3cold_allowed=0 run, the trace shows 00:04.1 receiving an runtime-resume request shortly afterwards. It reaches D0, pciehp immediately reports Card present / Link Up, and 09:00.0 then enumerates.
In the d3cold_allowed=1 run, GPE10 also increments, but there is no runtime-resume event for 00:04.1 after the hot-plug. It remains in D3cold for the rest of the capture and 09:00.0 remains absent.
IRQ 35 for 00:04.1 remained at zero in /proc/interrupts in both runs.
SHA256:
d3cold-allowed-0-20261007-041520.tar.gz
5e0af29245592916fb1682cc0bd3bedfcd75a1863d2d1bab0c2ab72bb14bc292
d3cold-allowed-1-20261007-041802.tar.gz
3f6e00600e65faf5fb5fd43f6d753c3900e6247500fe5f3297b6d23e25a0a8c4
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 3:53
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Thanks for the update. BTW can you try:
BEFORE plugging the dock
echo 0 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed
to see if the devices enumerate properly without the lspci. If they do can I get a log of the fail with echo 1 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed
and the pass with echo 0 > /sys/bus/pci/devices/0000:00:04.1/d3cold_allowed ?
thanks!
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Kovacs, Alexander
Sent: Tuesday, October 6, 2026 2:18 PM
To: 'Freeman Z' <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Freeman,
I'm confused, did /sys/firmware/acpi/interrupts/gpe10 increment on plug ?
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 1:46 PM
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
I reran the test with both 00:04.1 and the NHI in D3cold, polling the ACPI counters and device states every ~200 ms.
I pressed Enter late, so the manual "DOCK PLUGGED" marker should be ignored for timing. The first observable hot-plug effect was:
01:54:51.116
NHI: D3cold -> D0
sci_not: 8 -> 9
gpe10: unchanged at 27
Then:
01:54:54.083 gpe10/gpe_all/sci: 27 -> 29
01:54:55.152 gpe10/gpe_all/sci: 29 -> 31
Despite those GPE10 events, 00:04.1 remained suspended/D3cold and
09:00.0 remained absent through the end of the capture. IRQ 35 for
00:04.1 also remained at zero.
I went back through the ACPI tables and noticed that GPE 0x1A and GPE 0x10 appear to be two distinct wake paths for GP12.
In SSDT17, GP12._PRW returns:
{ 0x1A, 0x04 }
and _GPE._L1A sends Device Wake notifications to GP12 and GP12.SWUS (as well as the associated GP19/NHI devices) without checking PCIe Root Status.
GPE 0x10 is different. In SSDT16, _GPE._E10 is the GPP PME dispatcher.
For GP12 it does:
If (\_GPE.ET12 != 0xFF)
{
\_GPE.ET12 =
(M017 (Zero, 0x04, One, 0x78, Zero, 0x18) >> 0x10)
if ET12 is 1 or 3:
Notify (\_SB.PCI0.GP12, 0x02)
}
For 00:04.1, offset 0x78 is the PCIe Root Status register (PCIe capability at 0x58 + 0x20).
A GPE10 increment only shows that _E10 ran; it does not by itself show that the GP12 branch saw PME Status set or that GP12 received the Device Wake notification.
In the earlier full capture, GPE 0x1A remained at zero in all three
snapshots: before the plug, after the failed hot-plug, and after the targeted config-space read. 00:04.1 remained in D3cold until that targeted read, which immediately caused GP12 to transition to D0 and the downstream hierarchy to enumerate.
GP12's _DSD also has HotPlugSupportInD3 = 1 and associates the port with GP19.NHI1 / USB4 port 2.
Best regards,
Freeman
________________________________________
From: Kovacs, Alexander <Alexander.Kovacs@amd.com>
Sent: Wednesday, October 7, 2026 1:12
To: Freeman Z <SHD-ISAC@outlook.com>; Limonciello, Mario <Mario.Limonciello@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: RE: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
AMD General
Freeman,
Great, thanks for the confirmation...
Can you try:
get the 00:04.1 into a suspended state
Run:
sudo watch -n1 cat /sys/firmware/acpi/interrupts/gpe10
Perform hotplug of dock
If gpe10 does not increment when the dock is plugged into the suspended port, that's proof the wake never fired - and it's likely the GPE-0x10 _E10 path. If it does tick but nothing enumerates, the miss is likely downstream (native/pciehp
side).
Replied or Forwarded By:
Alex Kovacs
845-625-4422
akovacs@amd.com
-----Original Message-----
From: Freeman Z <SHD-ISAC@outlook.com>
Sent: Tuesday, October 6, 2026 11:33 AM
To: Limonciello, Mario <Mario.Limonciello@amd.com>; Kovacs, Alexander <Alexander.Kovacs@amd.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org; linux-usb@vger.kernel.org; bhelgaas@google.com; westeri@kernel.org; andreas.noever@gmail.com; YehezkelShB@gmail.com; rafael@kernel.org; linux-pm@vger.kernel.org; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
Hi Alex,
Thanks for checking the tables, and Mario, thanks for the explanation of the _DSD -> XDSD rename.
That is consistent with the suggestion that the XDSD rename may be an intentional way to keep an unused reference-code path disabled. This GV302XV exposes only the 00:04.1 / NHI1 USB4 path, so the NHI0 XDSD issue appears likely to be separate from the enumeration failure.
Since you haven't been able to reproduce the failure, these are the conditions that seem to matter on my system:
1. Cold boot with the dock disconnected.
2. 00:04.1 power/control = auto, with both 00:04.1 and the NHI
(6b:00.6) runtime-suspended in D3cold before the dock is plugged in.
3. No PCI config-space access to the root port before the hot-plug.
A config-space access wakes 00:04.1; both the targeted 4-byte config
read in this capture and plain lspci in earlier tests caused
enumeration to proceed normally.
I captured a failing hot-plug under these conditions using:
kernel: 7.2.9-1-cachyos
BIOS: 319
The capture includes runtime-PM and PCI hotplug/link tracepoints, pciehp / ACPI device-PM / Thunderbolt dynamic debug, and ACPI GPE and /proc/interrupts snapshots before the plug, after the plug, and after recovery.
A redacted archive is attached.
SHA256:
4d4d7f64aeb4a2bbd8e68cf221de2002ad427d3456fc8354c06f3d3760dad065
The relevant timeline from kernel.log is:
98.774
First observable hot-plug effect. The NHI begins resuming from
D3cold. IRQ 38 (00:08.3, PCIe PME / bwctrl) increased by one
between the snapshots, which is consistent with a PME wake through
the bridge hosting the NHI.
101.015 - 101.017
Thunderbolt PCIe Down and Up tunnel paths are activated.
101.017 - 135.664
00:04.1 remains suspended / D3cold.
The NHI remains active / D0.
09:00.0 remains absent.
No runtime-PM activity is recorded for 00:04.1.
IRQ 35 (00:04.1 PME/AER/pciehp) remains at zero.
None of the counted ACPI GPEs change.
135.664
The script performs only a 4-byte read from:
/sys/bus/pci/devices/0000:00:04.1/config
135.668
GP12 transitions from D3cold to D0.
135.681
pciehp reports:
Card present
Link Up
Its first link check after resume reports:
lnk_status = 0x3011
This has DLL Link Active set and no Link Training bit set.
135.808
09:00.0 [8086:5786] begins enumerating.
A full lspci scan was not needed.
So the PCIe tunnel is established while 00:04.1 remains in D3cold, and a targeted config-space read of 00:04.1 alone resumes the port. pciehp then immediately finds an active link and enumerates the downstream hierarchy.
No wake of 00:04.1 was observed during the hot-plug window.
The kernel also logs:
Wakeup disabled by ACPI
for 00:04.1 on resume, so GP12 is ACPI wake-capable via _PRW.
There are two observations I cannot explain yet:
1. sci_not increased from 6 to 7 while gpe10, gpe_all, and sci
remained unchanged. The snapshots do not timestamp that increment,
so it cannot yet be tied to the dock insertion.
2. The final Root Status of 00:04.1, read after recovery, shows:
PME ReqID 0021, PMEStatus+ PMEPending+
0021 decodes to 00:04.1.
IRQ 35 was zero in all three interrupt snapshots. Since Root Status
was read only after recovery, I do not know when these PME bits
became set.
Best regards,
Freeman
________________________________________
From: Mario Limonciello <mario.limonciello@amd.com>
Sent: Tuesday, October 6, 2026 22:37
To: Kovacs, Alexander <Alexander.Kovacs@amd.com>; Freeman Z <SHD-ISAC@outlook.com>; Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-pci@vger.kernel.org <linux-pci@vger.kernel.org>; linux-usb@vger.kernel.org <linux-usb@vger.kernel.org>; bhelgaas@google.com <bhelgaas@google.com>; westeri@kernel.org <westeri@kernel.org>; andreas.noever@gmail.com <andreas.noever@gmail.com>; YehezkelShB@gmail.com <yehezkelshb@gmail.com>; rafael@kernel.org <rafael@kernel.org>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; S, Sanath <Sanath.S@amd.com>; Natikar, Basavaraj <Basavaraj.Natikar@amd.com>; Martinez, Juan <Juan.Martinez@amd.com>; Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Subject: Re: [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration
On 10/6/26 09:33, Kovacs, Alexander wrote:
> AMD General
>
> Freeman,
>
> Ok, regarding the 00:03.1 device, I am seeing that it is misnamed in the tables.
>
> BIOS Bug Report: Thunderbolt/USB4 tunnel port `_DSD` misnamed `XDSD`
> (00:03.1 / NHI0 path)
>
> But that more than like does not have any bearing on the root dock enumeration issue...
>
> I am unable to create a case where I can replicate your fail on my test system yet.
>
_DSD -> XDSD is a strategy I've seen employed when someone wants to pick up reference code but has a difference in their design (for example they don't have a retimer connected to the second USB4 router and disabled the IP.
I don't know for sure; but my guess this is a strategy to avoid technical debt and mistakes when merging future reference code versions.
[-- Attachment #2: d3-cold-test-script.tar --]
[-- Type: application/x-tar, Size: 20480 bytes --]
^ permalink raw reply [flat|nested] 40+ messages in thread
end of thread, other threads:[~2026-10-09 13:39 UTC | newest]
Thread overview: 40+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-19 12:39 [BUG] PCI/USB4: AMD Phoenix 1022:14ef runtime suspend prevents JHL9480 downstream enumeration Freeman Z
2026-09-21 5:04 ` Mika Westerberg
2026-09-21 15:24 ` Mario Limonciello
2026-09-22 16:40 ` Freeman Z
2026-09-22 17:02 ` Kovacs, Alexander
2026-09-22 17:03 ` Kovacs, Alexander
2026-09-22 19:54 ` Kovacs, Alexander
2026-09-22 20:00 ` Mario Limonciello
2026-09-23 11:51 ` Freeman Z
2026-09-23 12:26 ` Kovacs, Alexander
2026-09-23 12:35 ` Mario Limonciello
2026-09-23 19:37 ` Kovacs, Alexander
2026-09-24 7:18 ` Freeman Z
2026-09-25 5:27 ` Mika Westerberg
2026-09-25 9:38 ` Freeman Z
2026-09-25 11:31 ` Freeman Z
2026-09-25 11:50 ` Mika Westerberg
2026-09-25 14:10 ` Mario Limonciello
2026-09-25 15:12 ` Freeman Z
2026-09-25 15:24 ` Mario Limonciello
2026-09-25 15:48 ` Freeman Z
2026-10-01 14:54 ` Kovacs, Alexander
2026-10-01 18:28 ` Freeman Z
2026-10-05 14:35 ` Kovacs, Alexander
2026-10-05 15:39 ` Freeman Z
2026-10-05 17:01 ` Kovacs, Alexander
2026-10-05 17:10 ` Freeman Z
2026-10-06 14:33 ` Kovacs, Alexander
2026-10-06 14:37 ` Mario Limonciello
2026-10-06 16:33 ` Freeman Z
2026-10-06 17:12 ` Kovacs, Alexander
2026-10-06 18:45 ` Freeman Z
2026-10-06 19:18 ` Kovacs, Alexander
2026-10-06 19:33 ` Freeman Z
2026-10-06 19:53 ` Kovacs, Alexander
2026-10-06 21:04 ` Freeman Z
2026-10-09 12:47 ` Kovacs, Alexander
2026-10-09 13:02 ` Freeman Z
2026-10-09 13:39 ` Kovacs, Alexander
2026-09-25 14:03 ` Kovacs, Alexander
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox