[PATCH 0/2] usb: misc: usb251xb: add DT battery charging configuration

[PATCH 0/2] usb: misc: usb251xb: add DT battery charging configuration

[Jhon Wilker Rodrigues Aquino]

From: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>

Add a Device Tree property to configure battery charging on selected downstream
ports of Microchip USB251x hubs.

The first patch documents the battery-charging-enable property and adds an
example enabling charging on ports 1 and 2. The second parses the port list and
sets the corresponding hub configuration bits. Charging remains disabled on
all ports when the property is omitted.

Jhon Wilker Rodrigues Aquino (2):
  dt-bindings: usb: microchip,usb251xb: add battery-charging-enable
    property
  usb: misc: usb251xb: configure battery charging from DT

 Documentation/devicetree/bindings/usb/usb251xb.yaml | 7 +++++++
 drivers/usb/misc/usb251xb.c                         | 5 ++++-
 2 files changed, 11 insertions(+), 1 deletion(-)

--
2.43.0

[PATCH 1/2] dt-bindings: usb: microchip,usb251xb: add battery-charging-enable property

[Jhon Wilker Rodrigues Aquino]

From: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>

Describe the battery-charging-enable property as a list of downstream ports in the USB251x device tree binding.

Add an example that enables charging on ports 1 and 2.

Signed-off-by: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>
---
 Documentation/devicetree/bindings/usb/usb251xb.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/usb251xb.yaml b/Documentation/devicetree/bindings/usb/usb251xb.yaml
index 0329a6aaaa928..0eb3035553c37 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.yaml
+++ b/Documentation/devicetree/bindings/usb/usb251xb.yaml
@@ -230,6 +230,12 @@ properties:
       Specifies the time it takes from the time the host initiates the
       power-on sequence to a port until the port has adequate power.
 
+  battery-charging-enable:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Specifies the downstream ports which will have battery charging enabled.
+      Battery charging is disabled on all ports by default.
+
   swap-dx-lanes:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
@@ -264,6 +270,7 @@ examples:
         manufacturer = "Foo";
         product = "Foo-Bar";
         serial = "1234567890A";
+        battery-charging-enable = <1 2>;
         /* correct misplaced usb connectors on port 1,2 */
         swap-dx-lanes = <1 2>;
       };
-- 
2.43.0

[PATCH 2/2] usb: misc: usb251xb: configure battery charging from DT

[Jhon Wilker Rodrigues Aquino]

From: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>

Parse the battery-charging-enable port list from the device tree and set the corresponding bits in the hub configuration register.

Keep charging disabled by default when the property is omitted.

Signed-off-by: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>
---
 drivers/usb/misc/usb251xb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index fb0693742f018..166eb541ef161 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -577,6 +577,10 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 			      (wchar_t *)hub->serial,
 			      USB251XB_STRING_BUFSIZE);
 
+	hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
+	usb251xb_get_ports_field(hub, "battery-charging-enable", data->port_cnt,
+				 true, &hub->bat_charge_en);
+
 	/*
 	 * The datasheet documents the register as 'Port Swap' but in real the
 	 * register controls the USB DP/DM signal swapping for each port.
@@ -588,7 +592,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	/* The following parameters are currently not exposed to devicetree, but
 	 * may be as soon as needed.
 	 */
-	hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
 	hub->boost_57 = USB251XB_DEF_BOOST_57;
 	hub->boost_14 = USB251XB_DEF_BOOST_14;
 	hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
-- 
2.43.0

Re: [PATCH 1/2] dt-bindings: usb: microchip,usb251xb: add battery-charging-enable property

[sashiko-bot]

> From: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>
> 
> Describe the battery-charging-enable property as a list of downstream ports in the USB251x device tree binding.
> 
> Add an example that enables charging on ports 1 and 2.
> 
> Signed-off-by: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261103185514.72144-1-jhonwilker0112@gmail.com?part=1

Re: [PATCH 2/2] usb: misc: usb251xb: configure battery charging from DT

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] usb: misc: usb251xb: missing bat_support check in usb251xb_get_ofdata()
--

commit 7116fd963729fc92bbd453fc4d055b0129eabda3
Author: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>

usb: misc: usb251xb: configure battery charging from DT

This commit parses the battery-charging-enable port list from the device tree
to configure the battery charging enable register on USB251xB hubs.

> diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
> index fb0693742f018..166eb541ef161 100644
> --- a/drivers/usb/misc/usb251xb.c
> +++ b/drivers/usb/misc/usb251xb.c
> @@ -577,6 +577,10 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
>  			      (wchar_t *)hub->serial,
>  			      USB251XB_STRING_BUFSIZE);
>  
> +	hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
> +	usb251xb_get_ports_field(hub, "battery-charging-enable", data->port_cnt,
> +				 true, &hub->bat_charge_en);

[Severity: Medium]
Should parsing "battery-charging-enable" in usb251xb_get_ofdata() be gated on
data->bat_support?

Commit dd99d106de25 ("usb: misc: usb251xb: Add structure for holding chip
specific values") introduced bat_support in struct usb251xb_data, setting it
to false for usb2517_data and usb2517i_data because the USB2517/USB2517i
variants do not support battery charging:

	static const struct usb251xb_data usb2517_data = {
		.product_id = 0x2517,
		.port_cnt = 7,
		.led_support = true,
		.bat_support = false,
		.product_str = "USB2517",
	};

Earlier in usb251xb_get_ofdata(), the variant-specific LED property checks
data->led_support before applying the configuration:

	if (data->led_support && of_get_property(np, "led-usb-mode", NULL))
		hub->conf_data3 &= ~BIT(1);

Without a similar check on data->bat_support here, bat_support remains unused
and probing a USB2517 or USB2517i node with "battery-charging-enable" present
in the device tree will populate hub->bat_charge_en and write non-zero values
to the reserved register 0xD0 (USB251XB_ADDR_BATTERY_CHARGING_ENABLE) during
usb251xb_connect().

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261103185514.72144-1-jhonwilker0112@gmail.com?part=2

[PATCH v2 0/2] usb: misc: usb251xb: add DT battery charging configuration

[Jhon Wilker Rodrigues Aquino]

From: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>

Add a Device Tree property to configure battery charging on selected downstream
ports of Microchip USB251x hubs.

The first patch documents the battery-charging-enable property and adds an
example enabling charging on ports 1 and 2. The second parses the port list and
sets the corresponding hub configuration bits. Charging remains disabled on
all ports when the property is omitted.

Changes in v2:
- Only parse battery-charging-enable when the chip variant supports battery charging.

Jhon Wilker Rodrigues Aquino (2):
  dt-bindings: usb: microchip,usb251xb: add battery-charging-enable
    property
  usb: misc: usb251xb: configure battery charging from DT

 Documentation/devicetree/bindings/usb/usb251xb.yaml | 7 +++++++
 drivers/usb/misc/usb251xb.c                         | 6 +++++-
 2 files changed, 12 insertions(+), 1 deletion(-)

--
2.43.0

[PATCH v2 1/2] dt-bindings: usb: microchip,usb251xb: add battery-charging-enable property

[Jhon Wilker Rodrigues Aquino]

From: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>

Describe the battery-charging-enable property as a list of downstream ports in the USB251x device tree binding.

Add an example that enables charging on ports 1 and 2.

Signed-off-by: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>
---
 Documentation/devicetree/bindings/usb/usb251xb.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/usb251xb.yaml b/Documentation/devicetree/bindings/usb/usb251xb.yaml
index 0329a6aaaa928..0eb3035553c37 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.yaml
+++ b/Documentation/devicetree/bindings/usb/usb251xb.yaml
@@ -230,6 +230,12 @@ properties:
       Specifies the time it takes from the time the host initiates the
       power-on sequence to a port until the port has adequate power.
 
+  battery-charging-enable:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Specifies the downstream ports which will have battery charging enabled.
+      Battery charging is disabled on all ports by default.
+
   swap-dx-lanes:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
@@ -264,6 +270,7 @@ examples:
         manufacturer = "Foo";
         product = "Foo-Bar";
         serial = "1234567890A";
+        battery-charging-enable = <1 2>;
         /* correct misplaced usb connectors on port 1,2 */
         swap-dx-lanes = <1 2>;
       };
-- 
2.43.0

[PATCH v2 2/2] usb: misc: usb251xb: configure battery charging from DT

[Jhon Wilker Rodrigues Aquino]

From: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>

Parse the battery-charging-enable port list from the device tree and set the corresponding bits in the hub configuration register.

Keep charging disabled by default when the property is omitted.

Signed-off-by: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>
---
 drivers/usb/misc/usb251xb.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index fb0693742f018..7c0086a554cfe 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -577,6 +577,11 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 			      (wchar_t *)hub->serial,
 			      USB251XB_STRING_BUFSIZE);
 
+	hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
+	if (data->bat_support)
+		usb251xb_get_ports_field(hub, "battery-charging-enable",
+					 data->port_cnt, true, &hub->bat_charge_en);
+
 	/*
 	 * The datasheet documents the register as 'Port Swap' but in real the
 	 * register controls the USB DP/DM signal swapping for each port.
@@ -588,7 +593,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	/* The following parameters are currently not exposed to devicetree, but
 	 * may be as soon as needed.
 	 */
-	hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
 	hub->boost_57 = USB251XB_DEF_BOOST_57;
 	hub->boost_14 = USB251XB_DEF_BOOST_14;
 	hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
-- 
2.43.0

Re: [PATCH v2 1/2] dt-bindings: usb: microchip,usb251xb: add battery-charging-enable property

[sashiko-bot]

> From: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>
> 
> Describe the battery-charging-enable property as a list of downstream ports in the USB251x device tree binding.
> 
> Add an example that enables charging on ports 1 and 2.
> 
> Signed-off-by: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261103200154.125681-1-jhonwilker0112@gmail.com?part=1

Re: [PATCH v2 2/2] usb: misc: usb251xb: configure battery charging from DT

[sashiko-bot]

> From: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>
> 
> Parse the battery-charging-enable port list from the device tree and set the corresponding bits in the hub configuration register.
> 
> Keep charging disabled by default when the property is omitted.
> 
> Signed-off-by: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261103200154.125681-1-jhonwilker0112@gmail.com?part=2

Re: [PATCH v2 1/2] dt-bindings: usb: microchip,usb251xb: add battery-charging-enable property

[Krzysztof Kozlowski]

On 03/11/2026 21:01, Jhon Wilker Rodrigues Aquino wrote:
> From: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>

Do not attach (thread) your patchsets to some other threads (unrelated
or older versions). This buries them deep in the mailbox and might
interfere with applying entire sets. See also:
https://elixir.bootlin.com/linux/v6.16-rc2/source/Documentation/process/submitting-patches.rst#L830


> 
> Describe the battery-charging-enable property as a list of downstream ports in the USB251x device tree binding.

Please wrap commit message according to Linux coding style / submission
process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597


Please run scripts/checkpatch.pl on the patches and fix reported
warnings. After that, run also 'scripts/checkpatch.pl --strict' on the
patches and (probably) fix more warnings. Some warnings can be ignored,
especially from --strict run, but the code here looks like it needs a
fix. Feel free to get in touch if the warning is not clear.


> 
> Add an example that enables charging on ports 1 and 2.
> 
> Signed-off-by: Jhon Wilker Rodrigues Aquino <jhon.aquino@autotrac.com.br>
> ---
>  Documentation/devicetree/bindings/usb/usb251xb.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/usb251xb.yaml b/Documentation/devicetree/bindings/usb/usb251xb.yaml
> index 0329a6aaaa928..0eb3035553c37 100644
> --- a/Documentation/devicetree/bindings/usb/usb251xb.yaml
> +++ b/Documentation/devicetree/bindings/usb/usb251xb.yaml
> @@ -230,6 +230,12 @@ properties:
>        Specifies the time it takes from the time the host initiates the
>        power-on sequence to a port until the port has adequate power.
>  
> +  battery-charging-enable:

Custom properties needs prefix, see writing bindings.

> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: |

Do not need '|' unless you need to preserve formatting.

> +      Specifies the downstream ports which will have battery charging enabled.
> +      Battery charging is disabled on all ports by default.

Why wouldn't you enable charging on all ports? You have entire
description (and/or commit msg) to explain why you are doing this and
why this is exactly hardware property.

Best regards,
Krzysztof