Linux Watchdog driver development
 help / color / mirror / Atom feed
From: Sam Protsenko <semen.protsenko@linaro.org>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Subject: [PATCH v2 09/12] watchdog: s3c2410: Cleanup PMU related code
Date: Sun, 31 Oct 2021 14:22:13 +0200	[thread overview]
Message-ID: <20211031122216.30212-10-semen.protsenko@linaro.org> (raw)
In-Reply-To: <20211031122216.30212-1-semen.protsenko@linaro.org>

Now that PMU enablement code was extended for new Exynos SoCs, it
doesn't look very cohesive and consistent anymore. Do a bit of renaming,
grouping and style changes, to make it look good again.

No functional change, just a refactoring commit.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
Changes in v2:
  - (none): it's a new patch

 drivers/watchdog/s3c2410_wdt.c | 48 ++++++++++++++++------------------
 1 file changed, 23 insertions(+), 25 deletions(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index ec341c876225..fdb1a1e9bd04 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -56,17 +56,16 @@
 #define EXYNOS5_RST_STAT_REG_OFFSET		0x0404
 #define EXYNOS5_WDT_DISABLE_REG_OFFSET		0x0408
 #define EXYNOS5_WDT_MASK_RESET_REG_OFFSET	0x040c
-#define QUIRK_HAS_PMU_CONFIG			(1 << 0)
-#define QUIRK_HAS_RST_STAT			(1 << 1)
-#define QUIRK_HAS_WTCLRINT_REG			(1 << 2)
+#define QUIRK_HAS_WTCLRINT_REG			(1 << 0)
+#define QUIRK_HAS_PMU_MASK_RESET		(1 << 1)
+#define QUIRK_HAS_PMU_RST_STAT			(1 << 2)
 #define QUIRK_HAS_PMU_AUTO_DISABLE		(1 << 3)
 #define QUIRK_HAS_PMU_CNT_EN			(1 << 4)
 
 /* These quirks require that we have a PMU register map */
-#define QUIRKS_HAVE_PMUREG			(QUIRK_HAS_PMU_CONFIG | \
-						 QUIRK_HAS_RST_STAT | \
-						 QUIRK_HAS_PMU_AUTO_DISABLE | \
-						 QUIRK_HAS_PMU_CNT_EN)
+#define QUIRKS_HAVE_PMUREG \
+	(QUIRK_HAS_PMU_MASK_RESET | QUIRK_HAS_PMU_RST_STAT | \
+	 QUIRK_HAS_PMU_AUTO_DISABLE | QUIRK_HAS_PMU_CNT_EN)
 
 static bool nowayout	= WATCHDOG_NOWAYOUT;
 static int tmr_margin;
@@ -146,8 +145,8 @@ static const struct s3c2410_wdt_variant drv_data_exynos5250  = {
 	.mask_bit = 20,
 	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
 	.rst_stat_bit = 20,
-	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \
-		  | QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_AUTO_DISABLE,
+	.quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET | \
+		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_AUTO_DISABLE,
 };
 
 static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
@@ -156,8 +155,8 @@ static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
 	.mask_bit = 0,
 	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
 	.rst_stat_bit = 9,
-	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \
-		  | QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_AUTO_DISABLE,
+	.quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET | \
+		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_AUTO_DISABLE,
 };
 
 static const struct s3c2410_wdt_variant drv_data_exynos7 = {
@@ -166,8 +165,8 @@ static const struct s3c2410_wdt_variant drv_data_exynos7 = {
 	.mask_bit = 23,
 	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
 	.rst_stat_bit = 23,	/* A57 WDTRESET */
-	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \
-		  | QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_AUTO_DISABLE,
+	.quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET | \
+		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_AUTO_DISABLE,
 };
 
 static const struct of_device_id s3c2410_wdt_match[] = {
@@ -253,24 +252,24 @@ static int s3c2410wdt_enable_counter(struct s3c2410_wdt *wdt, bool en)
 	return ret;
 }
 
-static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask)
+static int s3c2410wdt_enable(struct s3c2410_wdt *wdt, bool en)
 {
 	int ret;
 
 	if (wdt->drv_data->quirks & QUIRK_HAS_PMU_AUTO_DISABLE) {
-		ret = s3c2410wdt_disable_wdt_reset(wdt, mask);
+		ret = s3c2410wdt_disable_wdt_reset(wdt, !en);
 		if (ret < 0)
 			return ret;
 	}
 
-	if (wdt->drv_data->quirks & QUIRK_HAS_PMU_CONFIG) {
-		ret = s3c2410wdt_mask_wdt_reset(wdt, mask);
+	if (wdt->drv_data->quirks & QUIRK_HAS_PMU_MASK_RESET) {
+		ret = s3c2410wdt_mask_wdt_reset(wdt, !en);
 		if (ret < 0)
 			return ret;
 	}
 
 	if (wdt->drv_data->quirks & QUIRK_HAS_PMU_CNT_EN) {
-		ret = s3c2410wdt_enable_counter(wdt, !mask);
+		ret = s3c2410wdt_enable_counter(wdt, en);
 		if (ret < 0)
 			return ret;
 	}
@@ -531,7 +530,7 @@ static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
 	unsigned int rst_stat;
 	int ret;
 
-	if (!(wdt->drv_data->quirks & QUIRK_HAS_RST_STAT))
+	if (!(wdt->drv_data->quirks & QUIRK_HAS_PMU_RST_STAT))
 		return 0;
 
 	ret = regmap_read(wdt->pmureg, wdt->drv_data->rst_stat_reg, &rst_stat);
@@ -672,7 +671,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_cpufreq;
 
-	ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
+	ret = s3c2410wdt_enable(wdt, true);
 	if (ret < 0)
 		goto err_unregister;
 
@@ -707,7 +706,7 @@ static int s3c2410wdt_remove(struct platform_device *dev)
 	int ret;
 	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
 
-	ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
+	ret = s3c2410wdt_enable(wdt, false);
 	if (ret < 0)
 		return ret;
 
@@ -724,8 +723,7 @@ static void s3c2410wdt_shutdown(struct platform_device *dev)
 {
 	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
 
-	s3c2410wdt_mask_and_disable_reset(wdt, true);
-
+	s3c2410wdt_enable(wdt, false);
 	s3c2410wdt_stop(&wdt->wdt_device);
 }
 
@@ -740,7 +738,7 @@ static int s3c2410wdt_suspend(struct device *dev)
 	wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON);
 	wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT);
 
-	ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
+	ret = s3c2410wdt_enable(wdt, false);
 	if (ret < 0)
 		return ret;
 
@@ -760,7 +758,7 @@ static int s3c2410wdt_resume(struct device *dev)
 	writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count */
 	writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON);
 
-	ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
+	ret = s3c2410wdt_enable(wdt, true);
 	if (ret < 0)
 		return ret;
 
-- 
2.30.2


  parent reply	other threads:[~2021-10-31 12:22 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-31 12:22 [PATCH v2 00/12] watchdog: s3c2410: Add Exynos850 support Sam Protsenko
2021-10-31 12:22 ` [PATCH v2 01/12] dt-bindings: watchdog: Require samsung,syscon-phandle for Exynos7 Sam Protsenko
2021-11-01 19:21   ` Rob Herring
2021-10-31 12:22 ` [PATCH v2 02/12] dt-bindings: watchdog: Document Exynos850 watchdog bindings Sam Protsenko
2021-11-02  9:46   ` Krzysztof Kozlowski
2021-10-31 12:22 ` [PATCH v2 03/12] watchdog: s3c2410: Fail probe if can't find valid timeout Sam Protsenko
2021-11-02  9:49   ` Krzysztof Kozlowski
2021-10-31 12:22 ` [PATCH v2 04/12] watchdog: s3c2410: Let kernel kick watchdog Sam Protsenko
2021-11-02  9:49   ` Krzysztof Kozlowski
2021-10-31 12:22 ` [PATCH v2 05/12] watchdog: s3c2410: Make reset disable register optional Sam Protsenko
2021-11-02  9:52   ` Krzysztof Kozlowski
2021-10-31 12:22 ` [PATCH v2 06/12] watchdog: s3c2410: Extract disable and mask code into separate functions Sam Protsenko
2021-11-02  9:55   ` Krzysztof Kozlowski
2021-10-31 12:22 ` [PATCH v2 07/12] watchdog: s3c2410: Implement a way to invert mask reg value Sam Protsenko
2021-11-02 10:17   ` Krzysztof Kozlowski
2021-10-31 12:22 ` [PATCH v2 08/12] watchdog: s3c2410: Add support for WDT counter enable register Sam Protsenko
2021-11-02 10:05   ` Krzysztof Kozlowski
2021-10-31 12:22 ` Sam Protsenko [this message]
2021-11-02 10:12   ` [PATCH v2 09/12] watchdog: s3c2410: Cleanup PMU related code Krzysztof Kozlowski
2021-10-31 12:22 ` [PATCH v2 10/12] watchdog: s3c2410: Support separate source clock Sam Protsenko
2021-11-02 10:15   ` Krzysztof Kozlowski
2021-11-07 15:55     ` Sam Protsenko
2021-11-07 16:09       ` Guenter Roeck
2021-11-07 18:51         ` Sam Protsenko
2021-11-07 19:01           ` Guenter Roeck
2021-10-31 12:22 ` [PATCH v2 11/12] watchdog: s3c2410: Remove superfluous err label Sam Protsenko
2021-11-02 10:17   ` Krzysztof Kozlowski
2021-10-31 12:22 ` [PATCH v2 12/12] watchdog: s3c2410: Add Exynos850 support Sam Protsenko
2021-10-31 15:15   ` kernel test robot
2021-10-31 16:09   ` kernel test robot
2021-11-02 10:26   ` Krzysztof Kozlowski
2021-11-07 16:17     ` Sam Protsenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211031122216.30212-10-semen.protsenko@linaro.org \
    --to=semen.protsenko@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh+dt@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox