From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-renesas-soc@vger.kernel.org
Cc: "Herve Codina (Schneider Electric)" <herve.codina@bootlin.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>,
linux-watchdog@vger.kernel.org
Subject: [PATCH v4 3/4] watchdog: rzn1: remove now obsolete interrupt support
Date: Thu, 7 May 2026 12:24:08 +0200 [thread overview]
Message-ID: <20260507102410.43384-4-wsa+renesas@sang-engineering.com> (raw)
In-Reply-To: <20260507102410.43384-1-wsa+renesas@sang-engineering.com>
Previously, it was overlooked that the watchdog could reset the system
directly. So, a workaround using the interrupt which called
emergency_restart() was implemented. We now configure the controller
when booting properly to allow watchdog resets directly. Thus, remove
the interrupt workaround.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
drivers/watchdog/rzn1_wdt.c | 19 -------------------
1 file changed, 19 deletions(-)
diff --git a/drivers/watchdog/rzn1_wdt.c b/drivers/watchdog/rzn1_wdt.c
index 48d5afef62a5..4fdc5363ba98 100644
--- a/drivers/watchdog/rzn1_wdt.c
+++ b/drivers/watchdog/rzn1_wdt.c
@@ -79,14 +79,6 @@ static int rzn1_wdt_start(struct watchdog_device *w)
return 0;
}
-static irqreturn_t rzn1_wdt_irq(int irq, void *_wdt)
-{
- pr_crit("RZN1 Watchdog. Initiating system reboot\n");
- emergency_restart();
-
- return IRQ_HANDLED;
-}
-
static struct watchdog_info rzn1_wdt_info = {
.identity = "RZ/N1 Watchdog",
.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
@@ -101,12 +93,10 @@ static const struct watchdog_ops rzn1_wdt_ops = {
static int rzn1_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
struct rzn1_watchdog *wdt;
unsigned long clk_rate;
struct clk *clk;
int ret;
- int irq;
wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
if (!wdt)
@@ -116,15 +106,6 @@ static int rzn1_wdt_probe(struct platform_device *pdev)
if (IS_ERR(wdt->base))
return PTR_ERR(wdt->base);
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
-
- ret = devm_request_irq(dev, irq, rzn1_wdt_irq, 0,
- np->name, wdt);
- if (ret)
- return dev_err_probe(dev, ret, "failed to request irq %d\n", irq);
-
clk = devm_clk_get_enabled(dev, NULL);
if (IS_ERR(clk))
return dev_err_probe(dev, PTR_ERR(clk), "failed to get the clock\n");
--
2.47.3
next prev parent reply other threads:[~2026-05-07 10:24 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-07 10:24 [PATCH v4 0/4] watchdog: rzn1: clean up and drop irq requirement Wolfram Sang
2026-05-07 10:24 ` [PATCH v4 1/4] watchdog: rzn1: Fix reverse xmas tree declaration Wolfram Sang
2026-05-08 16:29 ` Guenter Roeck
2026-05-07 10:24 ` [PATCH v4 2/4] watchdog: rzn1: Use dev_err_probe() Wolfram Sang
2026-05-08 16:30 ` Guenter Roeck
2026-05-07 10:24 ` Wolfram Sang [this message]
2026-05-07 11:20 ` [PATCH v4 3/4] watchdog: rzn1: remove now obsolete interrupt support Herve Codina
2026-05-07 21:05 ` sashiko-bot
2026-05-08 16:31 ` Guenter Roeck
2026-05-08 20:05 ` Wolfram Sang
2026-05-07 10:24 ` [PATCH v4 4/4] dt-bindings: watchdog: renesas,rzn1-wdt: interrupts are not required Wolfram Sang
2026-05-07 11:22 ` Herve Codina
2026-05-08 16:32 ` Guenter Roeck
2026-05-13 22:28 ` Rob Herring (Arm)
2026-05-13 22:39 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260507102410.43384-4-wsa+renesas@sang-engineering.com \
--to=wsa+renesas@sang-engineering.com \
--cc=herve.codina@bootlin.com \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox