Re: [PATCH v4 2/4] Watchdog: sp5100_tco: Refactor MMIO base address initialization

[Terry Bowman <Terry.Bowman@amd.com>]

On 2/1/22 09:31, Guenter Roeck wrote:
> On 1/30/22 11:12, Terry Bowman wrote:
>> Combine MMIO base address and alternate base address detection. Combine
>> based on layout type. This will simplify the function by eliminating
>> a switch case.
>>
>> Move existing request/release code into functions. This currently only
>> supports port I/O request/release. The move into a separate function
>> will make it ready for adding MMIO region support.
>>
>> Co-developed-by: Robert Richter <rrichter@amd.com>
>> Signed-off-by: Robert Richter <rrichter@amd.com>
>> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
>> Tested-by: Jean Delvare <jdelvare@suse.de>
>> Reviewed-by: Jean Delvare <jdelvare@suse.de>
>> ---
>>   drivers/watchdog/sp5100_tco.c | 155 ++++++++++++++++++----------------
>>   drivers/watchdog/sp5100_tco.h |   1 +
>>   2 files changed, 82 insertions(+), 74 deletions(-)
>>
>> diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
>> index b365bbc9ac36..16e122d5045e 100644
>> --- a/drivers/watchdog/sp5100_tco.c
>> +++ b/drivers/watchdog/sp5100_tco.c
>> @@ -223,6 +223,55 @@ static u32 sp5100_tco_read_pm_reg32(u8 index)
>>       return val;
>>   }
>>   +static u32 sp5100_tco_request_region(struct device *dev,
>> +                     u32 mmio_addr,
>> +                     const char *dev_name)
>> +{
>> +    if (!devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE,
>> +                     dev_name)) {
>> +        dev_dbg(dev, "MMIO address 0x%08x already in use\n", mmio_addr);
>> +        return 0;
>> +    }
>> +
>> +    return mmio_addr;
>> +}
>> +
>> +static u32 sp5100_tco_prepare_base(struct sp5100_tco *tco,
>> +                   u32 mmio_addr,
>> +                   u32 alt_mmio_addr,
>> +                   const char *dev_name)
>> +{
>> +    struct device *dev = tco->wdd.parent;
>> +
>> +    dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n", mmio_addr);
>> +
>> +    if (!mmio_addr && !alt_mmio_addr)
>> +        return -ENODEV;
>> +
>> +    /* Check for MMIO address and alternate MMIO address conflicts */
>> +    if (mmio_addr)
>> +        mmio_addr = sp5100_tco_request_region(dev, mmio_addr, dev_name);
>> +
>> +    if (!mmio_addr && alt_mmio_addr)
>> +        mmio_addr = sp5100_tco_request_region(dev, alt_mmio_addr, dev_name);
>> +
>> +    if (!mmio_addr) {
>> +        dev_err(dev, "Failed to reserve MMIO or alternate MMIO region\n");
>> +        return -EBUSY;
>> +    }
>> +
>> +    tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
>> +    if (!tco->tcobase) {
>> +        dev_err(dev, "MMIO address 0x%08x failed mapping\n", mmio_addr);
>> +        devm_release_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
>> +        return -ENOMEM;
>> +    }
>> +
>> +    dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", tco->tcobase);
>> +
> 
> I know this is the same as the old code, but I think it would make sense to change
> this as suggested by 0-day and use %px instead.
> 
> Thanks,
> Guenter

Hi Guenter,

I'll add the change to v5.

Regards,
Terry