* rtw88: question about RTL8812F (8812FR) support
@ 2026-11-02 6:56 Hyeon Woo Bae
2026-11-02 7:10 ` Ping-Ke Shih
0 siblings, 1 reply; 2+ messages in thread
From: Hyeon Woo Bae @ 2026-11-02 6:56 UTC (permalink / raw)
To: pkshih; +Cc: linux-wireless
Hi Ping-Ke,
I am working on an OpenWrt port for a router based on the RTL8197F SoC.
Its 5 GHz radio is an RTL8812FR (11ac 2x2, PCIe).
As far as I can tell, rtw88 and rtw89 do not support RTL8812F, and I
could not find any public source for it. The vendor firmware on the
router only contains a built-in binary driver.
I would like to ask:
1. Are there any plans to support RTL8812F in rtw88?
2. If not, would Realtek be open to a community contribution? In that
case, could the firmware be made redistributable via linux-firmware,
and is there a reference (vendor driver source or a similar chip such
as 8822C) that I should base the work on?
A short "no plans" answer is also very helpful, so I know where to
focus.
Thanks,
Hyeon Woo Bae
^ permalink raw reply [flat|nested] 2+ messages in thread
* RE: rtw88: question about RTL8812F (8812FR) support
2026-11-02 6:56 rtw88: question about RTL8812F (8812FR) support Hyeon Woo Bae
@ 2026-11-02 7:10 ` Ping-Ke Shih
0 siblings, 0 replies; 2+ messages in thread
From: Ping-Ke Shih @ 2026-11-02 7:10 UTC (permalink / raw)
To: Hyeon Woo Bae; +Cc: linux-wireless@vger.kernel.org
Hyeon Woo Bae <yoursanstv@gmail.com> wrote:
> Hi Ping-Ke,
>
> I am working on an OpenWrt port for a router based on the RTL8197F SoC.
> Its 5 GHz radio is an RTL8812FR (11ac 2x2, PCIe).
>
> As far as I can tell, rtw88 and rtw89 do not support RTL8812F, and I
> could not find any public source for it. The vendor firmware on the
> router only contains a built-in binary driver.
>
> I would like to ask:
>
> 1. Are there any plans to support RTL8812F in rtw88?
no.
> 2. If not, would Realtek be open to a community contribution? In that
> case, could the firmware be made redistributable via linux-firmware,
> and is there a reference (vendor driver source or a similar chip such
> as 8822C) that I should base the work on?
I'm working on NIC WiFi, but RTL8812F is used by AP router, so
I don't know much about that. Sorry.
Ping-Ke
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-02 7:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-02 6:56 rtw88: question about RTL8812F (8812FR) support Hyeon Woo Bae
2026-11-02 7:10 ` Ping-Ke Shih
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox