* Update to wireless-regdb about Italy
@ 2019-06-06 13:49 Giorgio Bernardi
0 siblings, 0 replies; 2+ messages in thread
From: Giorgio Bernardi @ 2019-06-06 13:49 UTC (permalink / raw)
To: linux-wireless
Hi
I'm Italian and I work in Italy, I realize that nowadays the regdb entry
for Italy is as follows:
country IT: DFS-ETSI
(2402 - 2482 @ 40), (20)
(5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI
(5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI
(5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
And it misses the lines:
# Short Range Devices (SRD) (ETSI EN 300 440)
(5725 - 5875 @ 80), (25 mW)
Common to may European Countries.
I dug a bit in the current Italian regulation that is online on the
website of the
Ministry of Economic Development: https://www.mise.gov.it/index.php/en/
In the section about the "National Plan of Frequencies" (only in
Italian) at the URL:
https://www.mise.gov.it/index.php/it/comunicazioni/radio/pnrf-piano-nazionale-di-ripartizione-delle-frequenze
Two PDF files are linked:
--Tabelle di attribuzione Tabella B (27,50 MHz – 10.000 MHz) (pdf)
https://www.mise.gov.it/images/stories/documenti/Tabella_B_2750_MHz-10000_Mhz.pdf
Which at page 28 allows the use for ISM according to the general
European legislation: 2006/771/CE ERC/REC 70-03
--Note (esplicative, di carattere tecnico e con attribuzioni in deroga
al piano) (pdf)
https://www.mise.gov.it/images/stories/documenti/NOTE-pnrf.pdf
Which at page 334, in the paragraph 3.2.3 states in a explicit way the
permit to operate the in the band 5.725 ÷ 5.875 MHz,
with SRD and max power at 25 mW.
According to this regulation there's no reason not to have the:
(5725 - 5875 @ 80), (25 mW)
Inserted for Italy in the regdb
Who can do it ?
--
Giorgio Bernardi
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH] wireless-regdb: Fix overlapping ranges for Switzerland and Liechtenstein
@ 2019-07-02 14:19 Martin Willi
2019-07-13 13:02 ` Seth Forshee
0 siblings, 1 reply; 2+ messages in thread
From: Martin Willi @ 2019-07-02 14:19 UTC (permalink / raw)
To: Seth Forshee; +Cc: wireless-regdb, linux-wireless, Henrik Laxhuber
The commit referenced below changes the 5GHz frequency range 5250-5330
to 5150-5330, making that range overlapping with the existing range
5170-5250. This imposes DFS limitations and a reduced maximum power
level for the range 5170-5250.
The change of the frequency range seems not intentional. Instead the
commit should have changed the 5170-5250 range to 5150-5250, and the
5250-5330 range to 5250-5350 (see [1]).
[1] https://www.ofcomnet.ch/api/rir/1010/05
Fixes: 957a7cff72a3 ("wireless-regdb: update regulatory rules for Switzerland (CH), and Liechtenstein (LI) on 5GHz")
Signed-off-by: Martin Willi <martin@strongswan.org>
---
db.txt | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/db.txt b/db.txt
index d47ab94c3aa5..37393e6a793e 100644
--- a/db.txt
+++ b/db.txt
@@ -271,8 +271,8 @@ country CF: DFS-FCC
# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db
country CH: DFS-ETSI
(2402 - 2482 @ 40), (20)
- (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
- (5150 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
+ (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
+ (5250 - 5350 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
(5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
@@ -747,8 +747,8 @@ country LC: DFS-ETSI
# transmitter power control is in use: 5250-5330@23db, 5490-5710@30db
country LI: DFS-ETSI
(2402 - 2482 @ 40), (20)
- (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
- (5150 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
+ (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW, wmmrule=ETSI
+ (5250 - 5350 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW, wmmrule=ETSI
(5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] wireless-regdb: Fix overlapping ranges for Switzerland and Liechtenstein
2019-07-02 14:19 [PATCH] wireless-regdb: Fix overlapping ranges for Switzerland and Liechtenstein Martin Willi
@ 2019-07-13 13:02 ` Seth Forshee
2019-07-13 17:10 ` Update to wireless-regdb about Italy gb
0 siblings, 1 reply; 2+ messages in thread
From: Seth Forshee @ 2019-07-13 13:02 UTC (permalink / raw)
To: Martin Willi; +Cc: wireless-regdb, linux-wireless, Henrik Laxhuber
On Tue, Jul 02, 2019 at 04:19:44PM +0200, Martin Willi wrote:
> The commit referenced below changes the 5GHz frequency range 5250-5330
> to 5150-5330, making that range overlapping with the existing range
> 5170-5250. This imposes DFS limitations and a reduced maximum power
> level for the range 5170-5250.
>
> The change of the frequency range seems not intentional. Instead the
> commit should have changed the 5170-5250 range to 5150-5250, and the
> 5250-5330 range to 5250-5350 (see [1]).
>
> [1] https://www.ofcomnet.ch/api/rir/1010/05
>
> Fixes: 957a7cff72a3 ("wireless-regdb: update regulatory rules for Switzerland (CH), and Liechtenstein (LI) on 5GHz")
> Signed-off-by: Martin Willi <martin@strongswan.org>
Applied, thanks!
^ permalink raw reply [flat|nested] 2+ messages in thread* Update to wireless-regdb about Italy
2019-07-13 13:02 ` Seth Forshee
@ 2019-07-13 17:10 ` gb
0 siblings, 0 replies; 2+ messages in thread
From: gb @ 2019-07-13 17:10 UTC (permalink / raw)
To: linux-wireless, wireless-regdb
Hi
I'm Italian and I work in Italy, I realize that nowadays the regdb entry
for Italy is as follows:
country IT: DFS-ETSI
(2402 - 2482 @ 40), (20)
(5170 - 5250 @ 80), (20), AUTO-BW, wmmrule=ETSI
(5250 - 5330 @ 80), (20), DFS, AUTO-BW, wmmrule=ETSI
(5490 - 5710 @ 160), (27), DFS, wmmrule=ETSI
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
And it misses the lines:
# Short Range Devices (SRD) (ETSI EN 300 440)
(5725 - 5875 @ 80), (25 mW)
Common to may European Countries.
I dug a bit in the current Italian regulation that is online on the
website of the
Ministry of Economic Development: https://www.mise.gov.it/index.php/en/
In the section about the "National Plan of Frequencies" (only in
Italian) at the URL:
https://www.mise.gov.it/index.php/it/comunicazioni/radio/pnrf-piano-nazionale-di-ripartizione-delle-frequenze
Two PDF files are linked:
--Tabelle di attribuzione Tabella B (27,50 MHz – 10.000 MHz) (pdf)
https://www.mise.gov.it/images/stories/documenti/Tabella_B_2750_MHz-10000_Mhz.pdf
Which at page 28 allows the use for ISM according to the general
European legislation: 2006/771/CE ERC/REC 70-03
--Note (esplicative, di carattere tecnico e con attribuzioni in deroga
al piano) (pdf)
https://www.mise.gov.it/images/stories/documenti/NOTE-pnrf.pdf
Which at page 334, in the paragraph 3.2.3 states in a explicit way the
permit to operate the in the band 5.725 ÷ 5.875 MHz,
with SRD and max power at 25 mW.
According to this regulation there's no reason not to have the:
(5725 - 5875 @ 80), (25 mW)
Inserted for Italy in the regdb
Who can do it ?
--
Giorgio Bernardi
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-07-13 17:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-06-06 13:49 Update to wireless-regdb about Italy Giorgio Bernardi
-- strict thread matches above, loose matches on Subject: below --
2019-07-02 14:19 [PATCH] wireless-regdb: Fix overlapping ranges for Switzerland and Liechtenstein Martin Willi
2019-07-13 13:02 ` Seth Forshee
2019-07-13 17:10 ` Update to wireless-regdb about Italy gb
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox