[PATCH] libertas: problems setting wpa keys

[PATCH] libertas: problems setting wpa keys

[Dan Williams]

The 88w8385 chip, using SDIO interface and firmware release 5.0.11p0,
has problems when both unicast and multicast WPA keys are set in one
command. This patch ensures the keys are set independently.

The original author of this patch is Marc Pignat <marc.pignat@hevs.ch>

Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Dan Williams <dcbw@redhat.com>


diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index 3131afc..d00cf78 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -372,15 +372,40 @@ static int assoc_helper_wpa_keys(wlan_private *priv,
                                  struct assoc_request * assoc_req)
 {
 	int ret = 0;
+	unsigned int flags = assoc_req->flags;
 
 	lbs_deb_enter(LBS_DEB_ASSOC);
 
-	ret = libertas_prepare_and_send_command(priv,
-				    CMD_802_11_KEY_MATERIAL,
-				    CMD_ACT_SET,
-				    CMD_OPTION_WAITFORRSP,
-				    0, assoc_req);
+	/* Work around older firmware bug where WPA unicast and multicast
+	 * keys must be set independently.  Seen in SDIO parts with firmware
+	 * version 5.0.11p0.
+	 */
 
+	if (test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags)) {
+		clear_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags);
+		ret = libertas_prepare_and_send_command(priv,
+					CMD_802_11_KEY_MATERIAL,
+					CMD_ACT_SET,
+					CMD_OPTION_WAITFORRSP,
+					0, assoc_req);
+		assoc_req->flags = flags;
+	}
+
+	if (ret)
+		goto out;
+
+	if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags)) {
+		clear_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags);
+
+		ret = libertas_prepare_and_send_command(priv,
+					CMD_802_11_KEY_MATERIAL,
+					CMD_ACT_SET,
+					CMD_OPTION_WAITFORRSP,
+					0, assoc_req);
+		assoc_req->flags = flags;
+	}
+
+out:
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
 	return ret;
 }