From: Zhu Yi <yi.zhu@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, Tomas Winkler <tomas.winkler@intel.com>
Subject: [PATCH 10/43] iwlwifi: remove 4965 from alive_resp structures
Date: Thu, 29 May 2008 16:34:55 +0800 [thread overview]
Message-ID: <1212050128-17132-11-git-send-email-yi.zhu@intel.com> (raw)
In-Reply-To: <1212050128-17132-10-git-send-email-yi.zhu@intel.com>
From: Tomas Winkler <tomas.winkler@intel.com>
This patch removes 4965 from alive_resp and init_alivie_resp.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-commands.h | 10 +++++-----
drivers/net/wireless/iwlwifi/iwl-dev.h | 4 ++--
drivers/net/wireless/iwlwifi/iwl4965-base.c | 16 ++++++++--------
3 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 5b9e9bf..afd0f7d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -373,7 +373,7 @@ struct iwl4965_tx_power_db {
* 3) Tx gain compensation to balance 4965's 2 Tx chains for MIMO operation,
* for each of 5 frequency ranges.
*/
-struct iwl4965_init_alive_resp {
+struct iwl_init_alive_resp {
u8 ucode_minor;
u8 ucode_major;
__le16 reserved1;
@@ -449,7 +449,7 @@ struct iwl4965_init_alive_resp {
* The Linux driver can print both logs to the system log when a uCode error
* occurs.
*/
-struct iwl4965_alive_resp {
+struct iwl_alive_resp {
u8 ucode_minor;
u8 ucode_major;
__le16 reserved1;
@@ -473,7 +473,7 @@ union tsf {
/*
* REPLY_ERROR = 0x2 (response only, not a command)
*/
-struct iwl4965_error_resp {
+struct iwl_error_resp {
__le32 error_type;
u8 cmd_id;
u8 reserved1;
@@ -2861,12 +2861,12 @@ struct iwl_rx_packet {
__le32 len;
struct iwl_cmd_header hdr;
union {
- struct iwl4965_alive_resp alive_frame;
+ struct iwl_alive_resp alive_frame;
struct iwl4965_rx_frame rx_frame;
struct iwl4965_tx_resp tx_resp;
struct iwl4965_spectrum_notification spectrum_notif;
struct iwl4965_csa_notification csa_notif;
- struct iwl4965_error_resp err_resp;
+ struct iwl_error_resp err_resp;
struct iwl4965_card_state_notif card_state_notif;
struct iwl4965_beacon_notif beacon_status;
struct iwl4965_add_sta_resp add_sta;
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 342c6a5..da4d606 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1035,8 +1035,8 @@ struct iwl_priv {
/* 1st responses from initialize and runtime uCode images.
* 4965's initialize alive response contains some calibration data. */
- struct iwl4965_init_alive_resp card_alive_init;
- struct iwl4965_alive_resp card_alive;
+ struct iwl_init_alive_resp card_alive_init;
+ struct iwl_alive_resp card_alive;
#ifdef CONFIG_IWLWIFI_RFKILL
struct iwl_rfkill_mngr rfkill_mngr;
#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 5a5306d..ee9fe56 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -1927,11 +1927,11 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
}
-static void iwl4965_rx_reply_alive(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
+static void iwl_rx_reply_alive(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
- struct iwl4965_alive_resp *palive;
+ struct iwl_alive_resp *palive;
struct delayed_work *pwork;
palive = &pkt->u.alive_frame;
@@ -1945,12 +1945,12 @@ static void iwl4965_rx_reply_alive(struct iwl_priv *priv,
IWL_DEBUG_INFO("Initialization Alive received.\n");
memcpy(&priv->card_alive_init,
&pkt->u.alive_frame,
- sizeof(struct iwl4965_init_alive_resp));
+ sizeof(struct iwl_init_alive_resp));
pwork = &priv->init_alive_start;
} else {
IWL_DEBUG_INFO("Runtime Alive received.\n");
memcpy(&priv->card_alive, &pkt->u.alive_frame,
- sizeof(struct iwl4965_alive_resp));
+ sizeof(struct iwl_alive_resp));
pwork = &priv->alive_start;
}
@@ -2279,7 +2279,7 @@ static void iwl4965_rx_card_state_notif(struct iwl_priv *priv,
*/
static void iwl4965_setup_rx_handlers(struct iwl_priv *priv)
{
- priv->rx_handlers[REPLY_ALIVE] = iwl4965_rx_reply_alive;
+ priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
priv->rx_handlers[REPLY_ADD_STA] = iwl4965_rx_reply_add_sta;
priv->rx_handlers[REPLY_ERROR] = iwl4965_rx_reply_error;
priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl4965_rx_csa;
@@ -3423,7 +3423,7 @@ static void __iwl4965_down(struct iwl_priv *priv)
priv->cfg->ops->lib->free_shared_mem(priv);
exit:
- memset(&priv->card_alive, 0, sizeof(struct iwl4965_alive_resp));
+ memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
if (priv->ibss_beacon)
dev_kfree_skb(priv->ibss_beacon);
@@ -5075,7 +5075,7 @@ static ssize_t show_version(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = d->driver_data;
- struct iwl4965_alive_resp *palive = &priv->card_alive;
+ struct iwl_alive_resp *palive = &priv->card_alive;
if (palive->is_valid)
return sprintf(buf, "fw version: 0x%01X.0x%01X.0x%01X.0x%01X\n"
--
1.5.3.6
next prev parent reply other threads:[~2008-05-29 8:37 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-29 8:34 [PATCH 00/43] iwlwifi driver 05/29 updates Zhu Yi
2008-05-29 8:34 ` [PATCH 01/43] iwlwifi: move iwl_dump_nic_error_log to iwlcore module Zhu Yi
2008-05-29 8:34 ` [PATCH 02/43] iwlwifi: add RTC data address for iwl5000 Zhu Yi
2008-05-29 8:34 ` [PATCH 03/43] iwlwifi: use uCode error and event tables pointer w.r.t loaded image Zhu Yi
2008-05-29 8:34 ` [PATCH 04/43] iwlwifi: increase max payload of iwl_cmd Zhu Yi
2008-05-29 8:34 ` [PATCH 05/43] iwlwifi: create drivers debugfs dir under wiphy->debugfsdir Zhu Yi
2008-05-29 8:34 ` [PATCH 06/43] iwlwifi: mark 4965 ucode types Zhu Yi
2008-05-29 8:34 ` [PATCH 07/43] iwlwifi: remove unused variable form __iwl4965_down Zhu Yi
2008-05-29 8:34 ` [PATCH 08/43] iwlwifi: remove notif_missed_beacons variable Zhu Yi
2008-05-29 8:34 ` [PATCH 09/43] iwlwifi: clean up alive_start routine Zhu Yi
2008-05-29 8:34 ` Zhu Yi [this message]
2008-05-29 8:34 ` [PATCH 11/43] iwlwifi: setup correctly L1 L0S pi link values Zhu Yi
2008-05-29 8:34 ` [PATCH 12/43] iwlwifi: implement apm reset flow Zhu Yi
2008-05-29 8:34 ` [PATCH 13/43] iwlwifi: implement apm stop function Zhu Yi
2008-05-29 8:34 ` [PATCH 14/43] iwlwifi: refactor stop master function Zhu Yi
2008-05-29 8:35 ` [PATCH 15/43] iwlwifi: move txq_ctx_stop into iwl-tx.c Zhu Yi
2008-05-29 8:35 ` [PATCH 16/43] iwlwifi: move iwl_rxq_stop into iwl-rx.c Zhu Yi
2008-05-29 8:35 ` [PATCH 17/43] iwlwifi: add remove station functionality Zhu Yi
2008-05-29 8:35 ` [PATCH 18/43] iwlwifi: move add sta handler to iwl-sta.c Zhu Yi
2008-05-29 8:35 ` [PATCH 19/43] iwlwifi: move iwl_rx_missed_beacon_notif to iwl-rx.c Zhu Yi
2008-05-29 8:35 ` [PATCH 20/43] iwlwifi-5000: implement initial calibration for 5000 Zhu Yi
2008-05-29 8:35 ` [PATCH 21/43] iwlwifi: activate status ready timeout only for run time ucode Zhu Yi
2008-05-29 8:35 ` [PATCH 22/43] iwlwifi: add iwl5000_tx_response structure Zhu Yi
2008-05-29 8:35 ` [PATCH 23/43] iwlwifi: move tx response common handlers to iwlcore Zhu Yi
2008-05-29 8:35 ` [PATCH 24/43] iwlwlifi: impelemnt 5000 tx response path Zhu Yi
2008-05-29 8:35 ` [PATCH 25/43] iwlwifi: move 4965 tx response into iwl-4965.c Zhu Yi
2008-05-29 8:35 ` [PATCH 26/43] iwlwifi: fix in-column rate scaling Zhu Yi
2008-05-29 8:35 ` [PATCH 27/43] iwlwifi: move tx reclaim flow into iwl-tx Zhu Yi
2008-05-29 8:35 ` [PATCH 28/43] iwlwifi: implement txq invalidate byte count table Zhu Yi
2008-05-29 8:35 ` [PATCH 29/43] iwlwifi: iwl-5000 add rxon_assoc Zhu Yi
2008-05-29 8:35 ` [PATCH 30/43] iwlwifi: move iwl_sta_modify_enable_tid_tx to iwl-sta.c Zhu Yi
2008-05-29 8:35 ` [PATCH 31/43] iwlwifi: move aggregation code to iwl-tx.c Zhu Yi
2008-05-29 8:35 ` [PATCH 32/43] iwlwifi: add frame count limit to link quality command Zhu Yi
2008-05-29 8:35 ` [PATCH 33/43] iwlwifi: Rx handlers common use for 4965 and 5000 Zhu Yi
2008-05-29 8:35 ` [PATCH 34/43] iwlwifi: move iwl_get_hw_mode to iwl-core.h Zhu Yi
2008-05-29 8:35 ` [PATCH 35/43] mac80211: fix ieee80211_get_buffered_bc Zhu Yi
2008-05-29 8:35 ` [PATCH 36/43] mac80211: fix deadlock in sta->lock Zhu Yi
2008-05-29 8:35 ` [PATCH 37/43] mac80211: sends HT IE to user level through wext Zhu Yi
2008-05-29 8:35 ` [PATCH 38/43] mac80211: allow disable FAT in specific configurations Zhu Yi
2008-05-29 8:35 ` [PATCH 39/43] iwlwifi: disable FAT channel when not permitted Zhu Yi
2008-05-29 8:35 ` [PATCH 40/43] iwlwifi: fix a memory leak in scan Zhu Yi
2008-05-29 8:35 ` [PATCH 41/43] iwlwifi: remove debugfs entries before cfg80211 Zhu Yi
2008-05-29 8:35 ` [PATCH 42/43] iwlwifi: send calibration results as HUGE commands Zhu Yi
2008-05-29 8:35 ` [PATCH 43/43] iwlwifi: clean iwl4965_mac_config Zhu Yi
2008-05-30 11:47 ` [PATCH 40/43] iwlwifi: fix a memory leak in scan Tomas Winkler
2008-05-29 9:37 ` [PATCH 38/43] mac80211: allow disable FAT in specific configurations Johannes Berg
2008-05-29 9:58 ` Tomas Winkler
2008-05-29 10:12 ` Johannes Berg
2008-05-29 10:39 ` Tomas Winkler
2008-05-29 10:49 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1212050128-17132-11-git-send-email-yi.zhu@intel.com \
--to=yi.zhu@intel.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=tomas.winkler@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox