* Re: [ath5k-devel] ath5k hang up in mesh mode
[not found] <1197ff4c0808060056q7e10e39cl41a5ea5a26b7cdd6@mail.gmail.com>
@ 2008-08-06 13:56 ` Bob Copeland
2008-08-06 14:00 ` Johannes Berg
0 siblings, 1 reply; 4+ messages in thread
From: Bob Copeland @ 2008-08-06 13:56 UTC (permalink / raw)
To: YanBo; +Cc: wireless, ath5k-devel, Johannes Berg
Hi YanBo,
On Wed, Aug 6, 2008 at 3:56 AM, YanBo <dreamfly281@gmail.com> wrote:
> When I set two PC with Atheros AR2413 in mesh mode, they can find each
> other, then I tried to ping each other, after send 10-12 ping packets,
> the PC will hang up, below is the dmesg output, I suspicion this bug
> is the same as this one
> http://marc.info/?l=linux-wireless&m=121731102709834&w=2, but don't
> know if anyone has solved it?
I don't think they are the same issue. The previous one hasn't been solved
yet, but it occurred with 2.6.26 and you are using .27-rc1.
> [ 577.639420] Mesh plink with 00:19:e0:86:0f:2f ESTABLISHED
> [ 602.864544] BUG: sleeping function called from invalid context at
> mm/slab.c:3043
> [ 602.869975] in_atomic():1, irqs_disabled():0
> [ 602.874241] INFO: lockdep is turned off.
> [ 602.878162] Pid: 5160, comm: ath5k_pci Not tainted
> 2.6.27-rc1-wl-14922-gb73da91 #4
> [ 602.885719] [<c0172e5f>] kmem_cache_alloc+0xef/0x110
> [ 602.890794] [<c04e9908>] mesh_path_add+0xb8/0x2f0
> [ 602.895610] [<c04e9908>] mesh_path_add+0xb8/0x2f0
> [ 602.900468] [<c04eb8c6>] hwmp_route_info_get+0x406/0x4c0
> [ 602.905886] [<c04eb4e5>] hwmp_route_info_get+0x25/0x4c0
> [ 602.911927] [<c04eb9f4>] mesh_rx_path_sel_frame+0x74/0x870
> [ 602.917257] [<c04d76dd>] ieee80211_rx_bss_info+0x67d/0xe80
> [ 602.922846] [<c04d70dc>] ieee80211_rx_bss_info+0x7c/0xe80
> [ 602.928353] [<c04d9d40>] ieee80211_rx_mgmt_action+0x180/0x8a0
I guess mesh_path_add should be using GFP_ATOMIC instead of GFP_KERNEL, since
it's called under rcu_read_lock? CCed Johannes.
--
Bob Copeland %% www.bobcopeland.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ath5k-devel] ath5k hang up in mesh mode
2008-08-06 13:56 ` [ath5k-devel] ath5k hang up in mesh mode Bob Copeland
@ 2008-08-06 14:00 ` Johannes Berg
2008-08-07 2:45 ` YanBo
0 siblings, 1 reply; 4+ messages in thread
From: Johannes Berg @ 2008-08-06 14:00 UTC (permalink / raw)
To: Bob Copeland; +Cc: YanBo, wireless, Luis Carlos Cobo
[-- Attachment #1: Type: text/plain, Size: 1216 bytes --]
> > [ 577.639420] Mesh plink with 00:19:e0:86:0f:2f ESTABLISHED
> > [ 602.864544] BUG: sleeping function called from invalid context at
> > mm/slab.c:3043
> > [ 602.869975] in_atomic():1, irqs_disabled():0
> > [ 602.874241] INFO: lockdep is turned off.
> > [ 602.878162] Pid: 5160, comm: ath5k_pci Not tainted
> > 2.6.27-rc1-wl-14922-gb73da91 #4
> > [ 602.885719] [<c0172e5f>] kmem_cache_alloc+0xef/0x110
> > [ 602.890794] [<c04e9908>] mesh_path_add+0xb8/0x2f0
> > [ 602.895610] [<c04e9908>] mesh_path_add+0xb8/0x2f0
> > [ 602.900468] [<c04eb8c6>] hwmp_route_info_get+0x406/0x4c0
> > [ 602.905886] [<c04eb4e5>] hwmp_route_info_get+0x25/0x4c0
> > [ 602.911927] [<c04eb9f4>] mesh_rx_path_sel_frame+0x74/0x870
> > [ 602.917257] [<c04d76dd>] ieee80211_rx_bss_info+0x67d/0xe80
> > [ 602.922846] [<c04d70dc>] ieee80211_rx_bss_info+0x7c/0xe80
> > [ 602.928353] [<c04d9d40>] ieee80211_rx_mgmt_action+0x180/0x8a0
>
> I guess mesh_path_add should be using GFP_ATOMIC instead of GFP_KERNEL, since
> it's called under rcu_read_lock? CCed Johannes.
Looks like it, but I don't really know. OTOH, we really could make all
that RX business non-atomic. Oh well, not now.
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ath5k-devel] ath5k hang up in mesh mode
2008-08-06 14:00 ` Johannes Berg
@ 2008-08-07 2:45 ` YanBo
2008-08-07 5:12 ` YanBo
0 siblings, 1 reply; 4+ messages in thread
From: YanBo @ 2008-08-07 2:45 UTC (permalink / raw)
To: Johannes Berg; +Cc: Bob Copeland, wireless, Luis Carlos Cobo
On Wed, Aug 6, 2008 at 10:00 PM, Johannes Berg
<johannes@sipsolutions.net> wrote:
>
>> > [ 577.639420] Mesh plink with 00:19:e0:86:0f:2f ESTABLISHED
>> > [ 602.864544] BUG: sleeping function called from invalid context at
>> > mm/slab.c:3043
>> > [ 602.869975] in_atomic():1, irqs_disabled():0
>> > [ 602.874241] INFO: lockdep is turned off.
>> > [ 602.878162] Pid: 5160, comm: ath5k_pci Not tainted
>> > 2.6.27-rc1-wl-14922-gb73da91 #4
>> > [ 602.885719] [<c0172e5f>] kmem_cache_alloc+0xef/0x110
>> > [ 602.890794] [<c04e9908>] mesh_path_add+0xb8/0x2f0
>> > [ 602.895610] [<c04e9908>] mesh_path_add+0xb8/0x2f0
>> > [ 602.900468] [<c04eb8c6>] hwmp_route_info_get+0x406/0x4c0
>> > [ 602.905886] [<c04eb4e5>] hwmp_route_info_get+0x25/0x4c0
>> > [ 602.911927] [<c04eb9f4>] mesh_rx_path_sel_frame+0x74/0x870
>> > [ 602.917257] [<c04d76dd>] ieee80211_rx_bss_info+0x67d/0xe80
>> > [ 602.922846] [<c04d70dc>] ieee80211_rx_bss_info+0x7c/0xe80
>> > [ 602.928353] [<c04d9d40>] ieee80211_rx_mgmt_action+0x180/0x8a0
>>
>> I guess mesh_path_add should be using GFP_ATOMIC instead of GFP_KERNEL, since
>> it's called under rcu_read_lock? CCed Johannes.
>
> Looks like it, but I don't really know. OTOH, we really could make all
> that RX business non-atomic. Oh well, not now.
>
Above bug disappeared after change the GFP_KERNEL to GFP_ATOMIC, but
the PC still will hang up after send some packets, and the dmesg show
below message, IMHO this should be the root cause of the problem, it
is still a "cpu stuck for 61s" Bug after insert ath5k module:
[ 84.824343] mesh: no IPv6 routers present
[ 133.610997] Mesh plink (peer, state, llid, plid, event):
00:19:e0:86:0f:2f 0 0 0 1
[ 133.618982] Mesh plink (peer, state, llid, plid, event):
00:19:e0:86:0f:2f 2 23523 50820 4
[ 133.626851] Mesh plink with 00:19:e0:86:0f:2f ESTABLISHED
[ 253.403937] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0]
[ 253.405266] Modules linked in: ath5k
[ 253.405266] irq event stamp: 706218
[ 253.405266] hardirqs last enabled at (706217): [<c02dc49f>]
acpi_processor_idle+0x2a6/0x3ff
[ 253.405266] hardirqs last disabled at (706218): [<c050267d>]
schedule+0x6d/0x340
[ 253.405266] softirqs last enabled at (706166): [<c01267e5>]
do_softirq+0x45/0x50
[ 253.405266] softirqs last disabled at (706159): [<c01267e5>]
do_softirq+0x45/0x50
[ 253.405266]
[ 253.405266] Pid: 0, comm: swapper Not tainted
(2.6.27-rc1-wl-14922-gb73da91-dirty #6)
[ 253.405266] EIP: 0060:[<c0281502>] EFLAGS: 00000202 CPU: 0
[ 253.405266] EIP is at delay_tsc+0x92/0x9c
[ 253.405266] EAX: c06f6000 EBX: 000000a0 ECX: c06f6000 EDX: 00000309
[ 253.405266] ESI: 00000001 EDI: 03518402 EBP: 00000000 ESP: c06f7c4c
[ 253.405266] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 253.405266] CR0: 8005003b CR2: b7f6fa7c CR3: 35047000 CR4: 000006d0
[ 253.405266] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 253.405266] DR6: ffff0ff0 DR7: 00000400
[ 253.405266] [<c0281406>] __delay+0x6/0x10
[ 253.405266] [<c02857dc>] _raw_spin_lock+0xbc/0x140
[ 253.405266] [<c02854b8>] spin_bug+0x18/0x100
[ 253.405266] [<c0504a08>] _spin_lock_bh+0x58/0x70
[ 253.405266] [<f885a3d5>] ath5k_tx+0x335/0x490 [ath5k]
[ 253.405266] [<f885a3d5>] ath5k_tx+0x335/0x490 [ath5k]
[ 253.405266] [<f885d150>] ath5k_hw_setup_4word_tx_desc+0x0/0x2a0 [ath5k]
[ 253.405266] [<c04e577e>] __ieee80211_tx+0x3e/0x160
[ 253.405266] [<c04e5bf7>] ieee80211_master_start_xmit+0x247/0x3e0
[ 253.405266] [<c04e5b27>] ieee80211_master_start_xmit+0x177/0x3e0
[ 253.405266] [<c042a35d>] dev_hard_start_xmit+0x27d/0x310
[ 253.405266] [<c0438a41>] __qdisc_run+0x141/0x1e0
[ 253.405266] [<c042cbc2>] dev_queue_xmit+0xb2/0x500
[ 253.405266] [<c042cdc7>] dev_queue_xmit+0x2b7/0x500
[ 253.405266] [<c042cb49>] dev_queue_xmit+0x39/0x500
[ 253.405266] [<c04eb2d6>] mesh_path_error_tx+0xe6/0x100
[ 253.405266] [<c04e9728>] mesh_plink_broken+0xc8/0x130
[ 253.405266] [<c04e9660>] mesh_plink_broken+0x0/0x130
[ 253.405266] [<c04ecf32>] rate_control_pid_tx_status+0x582/0x5a0
[ 253.405266] [<c04ec9d5>] rate_control_pid_tx_status+0x25/0x5a0
[ 253.405266] [<c04cfd60>] ieee80211_tx_status+0x240/0x4f0
[ 253.405266] [<c04cfbd5>] ieee80211_tx_status+0xb5/0x4f0
[ 253.405266] [<c04cfb20>] ieee80211_tx_status+0x0/0x4f0
[ 253.405266] [<f8858f36>] ath5k_tasklet_tx+0x126/0x250 [ath5k]
[ 253.405266] [<c0505035>] _spin_unlock+0x25/0x40
[ 253.405266] [<c0126a76>] irq_exit+0x16/0x50
[ 253.405266] [<c0126903>] tasklet_action+0x43/0x90
[ 253.405266] [<c0126742>] __do_softirq+0x62/0xc0
[ 253.405266] [<c01267e5>] do_softirq+0x45/0x50
[ 253.405266] [<c0126aa4>] irq_exit+0x44/0x50
[ 253.405266] [<c0105de6>] do_IRQ+0x46/0x90
[ 253.405266] [<c02818c4>] trace_hardirqs_off_thunk+0xc/0x18
[ 253.405266] [<c0103df8>] common_interrupt+0x28/0x30
[ 253.405266] [<c02dc47c>] acpi_processor_idle+0x283/0x3ff
[ 253.405266] [<c0101dff>] cpu_idle+0x2f/0x80
[ 253.405266] =======================
[ 318.901891] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0]
[ 318.904266] Modules linked in: ath5k
[ 318.904266] irq event stamp: 706218
[ 318.904266] hardirqs last enabled at (706217): [<c02dc49f>]
acpi_processor_idle+0x2a6/0x3ff
[ 318.904266] hardirqs last disabled at (706218): [<c050267d>]
schedule+0x6d/0x340
[ 318.904266] softirqs last enabled at (706166): [<c01267e5>]
do_softirq+0x45/0x50
[ 318.904266] softirqs last disabled at (706159): [<c01267e5>]
do_softirq+0x45/0x50
[ 318.904266]
[ 318.904266] Pid: 0, comm: swapper Not tainted
(2.6.27-rc1-wl-14922-gb73da91-dirty #6)
[ 318.904266] EIP: 0060:[<c0108e96>] EFLAGS: 00000286 CPU: 0
[ 318.904266] EIP is at native_read_tsc+0x6/0x10
[ 318.904266] EAX: 00000000 EBX: f507fd14 ECX: 00000001 EDX: c06f6000
[ 318.904266] ESI: 00000001 EDI: 00000000 EBP: 00000000 ESP: c06f7c48
[ 318.904266] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 318.904266] CR0: 8005003b CR2: b7f6fa7c CR3: 35047000 CR4: 000006d0
[ 318.904266] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 318.904266] DR6: ffff0ff0 DR7: 00000400
[ 318.904266] [<c028148c>] delay_tsc+0x1c/0x9c
[ 318.904266] [<c0281406>] __delay+0x6/0x10
[ 318.904266] [<c02857dc>] _raw_spin_lock+0xbc/0x140
[ 318.904266] [<c02854b8>] spin_bug+0x18/0x100
[ 318.904266] [<c0504a08>] _spin_lock_bh+0x58/0x70
[ 318.904266] [<f885a3d5>] ath5k_tx+0x335/0x490 [ath5k]
[ 318.904266] [<f885a3d5>] ath5k_tx+0x335/0x490 [ath5k]
[ 318.904266] [<f885d150>] ath5k_hw_setup_4word_tx_desc+0x0/0x2a0 [ath5k]
[ 318.904266] [<c04e577e>] __ieee80211_tx+0x3e/0x160
[ 318.904266] [<c04e5bf7>] ieee80211_master_start_xmit+0x247/0x3e0
[ 318.904266] [<c04e5b27>] ieee80211_master_start_xmit+0x177/0x3e0
[ 318.904266] [<c042a35d>] dev_hard_start_xmit+0x27d/0x310
[ 318.904266] [<c0438a41>] __qdisc_run+0x141/0x1e0
[ 318.904266] [<c042cbc2>] dev_queue_xmit+0xb2/0x500
[ 318.904266] [<c042cdc7>] dev_queue_xmit+0x2b7/0x500
[ 318.904266] [<c042cb49>] dev_queue_xmit+0x39/0x500
[ 318.904266] [<c04eb2d6>] mesh_path_error_tx+0xe6/0x100
[ 318.904266] [<c04e9728>] mesh_plink_broken+0xc8/0x130
[ 318.904266] [<c04e9660>] mesh_plink_broken+0x0/0x130
[ 318.904266] [<c04ecf32>] rate_control_pid_tx_status+0x582/0x5a0
[ 318.904266] [<c04ec9d5>] rate_control_pid_tx_status+0x25/0x5a0
[ 318.904266] [<c04cfd60>] ieee80211_tx_status+0x240/0x4f0
[ 318.904266] [<c04cfbd5>] ieee80211_tx_status+0xb5/0x4f0
[ 318.904266] [<c04cfb20>] ieee80211_tx_status+0x0/0x4f0
[ 318.904266] [<f8858f36>] ath5k_tasklet_tx+0x126/0x250 [ath5k]
[ 318.904266] [<c0505035>] _spin_unlock+0x25/0x40
[ 318.904266] [<c0126a76>] irq_exit+0x16/0x50
[ 318.904266] [<c0126903>] tasklet_action+0x43/0x90
[ 318.904266] [<c0126742>] __do_softirq+0x62/0xc0
[ 318.904266] [<c01267e5>] do_softirq+0x45/0x50
[ 318.904266] [<c0126aa4>] irq_exit+0x44/0x50
[ 318.904266] [<c0105de6>] do_IRQ+0x46/0x90
[ 318.904266] [<c02818c4>] trace_hardirqs_off_thunk+0xc/0x18
[ 318.904266] [<c0103df8>] common_interrupt+0x28/0x30
[ 318.904266] [<c02dc47c>] acpi_processor_idle+0x283/0x3ff
[ 318.904266] [<c0101dff>] cpu_idle+0x2f/0x80
[ 318.904266] =======================
[ 384.399862] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0]
[ 384.402266] Modules linked in: ath5k
[ 384.402266] irq event stamp: 706218
[ 384.402266] hardirqs last enabled at (706217): [<c02dc49f>]
acpi_processor_idle+0x2a6/0x3ff
[ 384.402266] hardirqs last disabled at (706218): [<c050267d>]
schedule+0x6d/0x340
[ 384.402266] softirqs last enabled at (706166): [<c01267e5>]
do_softirq+0x45/0x50
[ 384.402266] softirqs last disabled at (706159): [<c01267e5>]
do_softirq+0x45/0x50
[ 384.402266]
[ 384.402266] Pid: 0, comm: swapper Not tainted
(2.6.27-rc1-wl-14922-gb73da91-dirty #6)
[ 384.402266] EIP: 0060:[<c0108e96>] EFLAGS: 00000286 CPU: 0
[ 384.402266] EIP is at native_read_tsc+0x6/0x10
[ 384.402266] EAX: 00000000 EBX: f507fd14 ECX: 00000001 EDX: c06f6000
[ 384.402266] ESI: 00000001 EDI: 00000000 EBP: 00000000 ESP: c06f7c48
[ 384.402266] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 384.402266] CR0: 8005003b CR2: b7f6fa7c CR3: 35047000 CR4: 000006d0
[ 384.402266] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 384.402266] DR6: ffff0ff0 DR7: 00000400
[ 384.402266] [<c028148c>] delay_tsc+0x1c/0x9c
[ 384.402266] [<c0281406>] __delay+0x6/0x10
[ 384.402266] [<c02857dc>] _raw_spin_lock+0xbc/0x140
[ 384.402266] [<c02854b8>] spin_bug+0x18/0x100
[ 384.402266] [<c0504a08>] _spin_lock_bh+0x58/0x70
[ 384.402266] [<f885a3d5>] ath5k_tx+0x335/0x490 [ath5k]
[ 384.402266] [<f885a3d5>] ath5k_tx+0x335/0x490 [ath5k]
[ 384.402266] [<f885d150>] ath5k_hw_setup_4word_tx_desc+0x0/0x2a0 [ath5k]
[ 384.402266] [<c04e577e>] __ieee80211_tx+0x3e/0x160
[ 384.402266] [<c04e5bf7>] ieee80211_master_start_xmit+0x247/0x3e0
[ 384.402266] [<c04e5b27>] ieee80211_master_start_xmit+0x177/0x3e0
[ 384.402266] [<c042a35d>] dev_hard_start_xmit+0x27d/0x310
[ 384.402266] [<c0438a41>] __qdisc_run+0x141/0x1e0
[ 384.402266] [<c042cbc2>] dev_queue_xmit+0xb2/0x500
[ 384.402266] [<c042cdc7>] dev_queue_xmit+0x2b7/0x500
[ 384.402266] [<c042cb49>] dev_queue_xmit+0x39/0x500
[ 384.402266] [<c04eb2d6>] mesh_path_error_tx+0xe6/0x100
[ 384.402266] [<c04e9728>] mesh_plink_broken+0xc8/0x130
[ 384.402266] [<c04e9660>] mesh_plink_broken+0x0/0x130
[ 384.402266] [<c04ecf32>] rate_control_pid_tx_status+0x582/0x5a0
[ 384.402266] [<c04ec9d5>] rate_control_pid_tx_status+0x25/0x5a0
[ 384.402266] [<c04cfd60>] ieee80211_tx_status+0x240/0x4f0
[ 384.402266] [<c04cfbd5>] ieee80211_tx_status+0xb5/0x4f0
[ 384.402266] [<c04cfb20>] ieee80211_tx_status+0x0/0x4f0
[ 384.402266] [<f8858f36>] ath5k_tasklet_tx+0x126/0x250 [ath5k]
[ 384.402266] [<c0505035>] _spin_unlock+0x25/0x40
[ 384.402266] [<c0126a76>] irq_exit+0x16/0x50
[ 384.402266] [<c0126903>] tasklet_action+0x43/0x90
[ 384.402266] [<c0126742>] __do_softirq+0x62/0xc0
[ 384.402266] [<c01267e5>] do_softirq+0x45/0x50
[ 384.402266] [<c0126aa4>] irq_exit+0x44/0x50
[ 384.402266] [<c0105de6>] do_IRQ+0x46/0x90
[ 384.402266] [<c02818c4>] trace_hardirqs_off_thunk+0xc/0x18
[ 384.402266] [<c0103df8>] common_interrupt+0x28/0x30
[ 384.402266] [<c02dc47c>] acpi_processor_idle+0x283/0x3ff
[ 384.402266] [<c0101dff>] cpu_idle+0x2f/0x80
[ 384.402266] =======================
[ 449.897902] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0]
[ 449.900266] Modules linked in: ath5k
[ 449.900266] irq event stamp: 706218
[ 449.900266] hardirqs last enabled at (706217): [<c02dc49f>]
acpi_processor_idle+0x2a6/0x3ff
[ 449.900266] hardirqs last disabled at (706218): [<c050267d>]
schedule+0x6d/0x340
[ 449.900266] softirqs last enabled at (706166): [<c01267e5>]
do_softirq+0x45/0x50
[ 449.900266] softirqs last disabled at (706159): [<c01267e5>]
do_softirq+0x45/0x50
[ 449.900266]
[ 449.900266] Pid: 0, comm: swapper Not tainted
(2.6.27-rc1-wl-14922-gb73da91-dirty #6)
[ 449.900266] EIP: 0060:[<c0108e9e>] EFLAGS: 00000286 CPU: 0
[ 449.900266] EIP is at native_read_tsc+0xe/0x10
[ 449.900266] EAX: 487db22a EBX: f507fd14 ECX: 00000001 EDX: 0000008f
[ 449.900266] ESI: 00000001 EDI: 487db194 EBP: 00000000 ESP: c06f7c48
[ 449.900266] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 449.900266] CR0: 8005003b CR2: b7f6fa7c CR3: 35047000 CR4: 000006d0
[ 449.900266] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 449.900266] DR6: ffff0ff0 DR7: 00000400
[ 449.900266] [<c02814c1>] delay_tsc+0x51/0x9c
[ 449.900266] [<c0281406>] __delay+0x6/0x10
[ 449.900266] [<c02857dc>] _raw_spin_lock+0xbc/0x140
[ 449.900266] [<c02854b8>] spin_bug+0x18/0x100
[ 449.900266] [<c0504a08>] _spin_lock_bh+0x58/0x70
[ 449.900266] [<f885a3d5>] ath5k_tx+0x335/0x490 [ath5k]
[ 449.900266] [<f885a3d5>] ath5k_tx+0x335/0x490 [ath5k]
[ 449.900266] [<f885d150>] ath5k_hw_setup_4word_tx_desc+0x0/0x2a0 [ath5k]
[ 449.900266] [<c04e577e>] __ieee80211_tx+0x3e/0x160
[ 449.900266] [<c04e5bf7>] ieee80211_master_start_xmit+0x247/0x3e0
[ 449.900266] [<c04e5b27>] ieee80211_master_start_xmit+0x177/0x3e0
[ 449.900266] [<c042a35d>] dev_hard_start_xmit+0x27d/0x310
[ 449.900266] [<c0438a41>] __qdisc_run+0x141/0x1e0
[ 449.900266] [<c042cbc2>] dev_queue_xmit+0xb2/0x500
[ 449.900266] [<c042cdc7>] dev_queue_xmit+0x2b7/0x500
[ 449.900266] [<c042cb49>] dev_queue_xmit+0x39/0x500
[ 449.900266] [<c04eb2d6>] mesh_path_error_tx+0xe6/0x100
[ 449.900266] [<c04e9728>] mesh_plink_broken+0xc8/0x130
[ 449.900266] [<c04e9660>] mesh_plink_broken+0x0/0x130
[ 449.900266] [<c04ecf32>] rate_control_pid_tx_status+0x582/0x5a0
[ 449.900266] [<c04ec9d5>] rate_control_pid_tx_status+0x25/0x5a0
[ 449.900266] [<c04cfd60>] ieee80211_tx_status+0x240/0x4f0
[ 449.900266] [<c04cfbd5>] ieee80211_tx_status+0xb5/0x4f0
[ 449.900266] [<c04cfb20>] ieee80211_tx_status+0x0/0x4f0
[ 449.900266] [<f8858f36>] ath5k_tasklet_tx+0x126/0x250 [ath5k]
[ 449.900266] [<c0505035>] _spin_unlock+0x25/0x40
[ 449.900266] [<c0126a76>] irq_exit+0x16/0x50
[ 449.900266] [<c0126903>] tasklet_action+0x43/0x90
[ 449.900266] [<c0126742>] __do_softirq+0x62/0xc0
[ 449.900266] [<c01267e5>] do_softirq+0x45/0x50
[ 449.900266] [<c0126aa4>] irq_exit+0x44/0x50
[ 449.900266] [<c0105de6>] do_IRQ+0x46/0x90
[ 449.900266] [<c02818c4>] trace_hardirqs_off_thunk+0xc/0x18
[ 449.900266] [<c0103df8>] common_interrupt+0x28/0x30
[ 449.900266] [<c02dc47c>] acpi_processor_idle+0x283/0x3ff
[ 449.900266] [<c0101dff>] cpu_idle+0x2f/0x80
[ 449.900266] =======================
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ath5k-devel] ath5k hang up in mesh mode
2008-08-07 2:45 ` YanBo
@ 2008-08-07 5:12 ` YanBo
0 siblings, 0 replies; 4+ messages in thread
From: YanBo @ 2008-08-07 5:12 UTC (permalink / raw)
To: Johannes Berg; +Cc: Bob Copeland, wireless, Luis Carlos Cobo
On Thu, Aug 7, 2008 at 10:45 AM, YanBo <dreamfly281@gmail.com> wrote:
> On Wed, Aug 6, 2008 at 10:00 PM, Johannes Berg
> <johannes@sipsolutions.net> wrote:
>>
>>> > [ 577.639420] Mesh plink with 00:19:e0:86:0f:2f ESTABLISHED
>>> > [ 602.864544] BUG: sleeping function called from invalid context at
>>> > mm/slab.c:3043
>>> > [ 602.869975] in_atomic():1, irqs_disabled():0
>>> > [ 602.874241] INFO: lockdep is turned off.
>>> > [ 602.878162] Pid: 5160, comm: ath5k_pci Not tainted
>>> > 2.6.27-rc1-wl-14922-gb73da91 #4
>>> > [ 602.885719] [<c0172e5f>] kmem_cache_alloc+0xef/0x110
>>> > [ 602.890794] [<c04e9908>] mesh_path_add+0xb8/0x2f0
>>> > [ 602.895610] [<c04e9908>] mesh_path_add+0xb8/0x2f0
>>> > [ 602.900468] [<c04eb8c6>] hwmp_route_info_get+0x406/0x4c0
>>> > [ 602.905886] [<c04eb4e5>] hwmp_route_info_get+0x25/0x4c0
>>> > [ 602.911927] [<c04eb9f4>] mesh_rx_path_sel_frame+0x74/0x870
>>> > [ 602.917257] [<c04d76dd>] ieee80211_rx_bss_info+0x67d/0xe80
>>> > [ 602.922846] [<c04d70dc>] ieee80211_rx_bss_info+0x7c/0xe80
>>> > [ 602.928353] [<c04d9d40>] ieee80211_rx_mgmt_action+0x180/0x8a0
>>>
>>> I guess mesh_path_add should be using GFP_ATOMIC instead of GFP_KERNEL, since
>>> it's called under rcu_read_lock? CCed Johannes.
>>
>> Looks like it, but I don't really know. OTOH, we really could make all
>> that RX business non-atomic. Oh well, not now.
>>
> Above bug disappeared after change the GFP_KERNEL to GFP_ATOMIC, but
> the PC still will hang up after send some packets, and the dmesg show
> below message, IMHO this should be the root cause of the problem, it
> is still a "cpu stuck for 61s" Bug after insert ath5k module:
>
> [ 84.824343] mesh: no IPv6 routers present
> [ 133.610997] Mesh plink (peer, state, llid, plid, event):
> 00:19:e0:86:0f:2f 0 0 0 1
> [ 133.618982] Mesh plink (peer, state, llid, plid, event):
> 00:19:e0:86:0f:2f 2 23523 50820 4
> [ 133.626851] Mesh plink with 00:19:e0:86:0f:2f ESTABLISHED
> [ 253.403937] BUG: soft lockup - CPU#0 stuck for 61s! [swapper:0]
> [ 253.405266] Modules linked in: ath5k
> [ 253.405266] irq event stamp: 706218
> [ 253.405266] hardirqs last enabled at (706217): [<c02dc49f>]
> acpi_processor_idle+0x2a6/0x3ff
> [ 253.405266] hardirqs last disabled at (706218): [<c050267d>]
> schedule+0x6d/0x340
> [ 253.405266] softirqs last enabled at (706166): [<c01267e5>]
> do_softirq+0x45/0x50
> [ 253.405266] softirqs last disabled at (706159): [<c01267e5>]
> do_softirq+0x45/0x50
> [ 253.405266]
> [ 253.405266] Pid: 0, comm: swapper Not tainted
> (2.6.27-rc1-wl-14922-gb73da91-dirty #6)
> [ 253.405266] EIP: 0060:[<c0281502>] EFLAGS: 00000202 CPU: 0
> [ 253.405266] EIP is at delay_tsc+0x92/0x9c
> [ 253.405266] EAX: c06f6000 EBX: 000000a0 ECX: c06f6000 EDX: 00000309
> [ 253.405266] ESI: 00000001 EDI: 03518402 EBP: 00000000 ESP: c06f7c4c
> [ 253.405266] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
> [ 253.405266] CR0: 8005003b CR2: b7f6fa7c CR3: 35047000 CR4: 000006d0
> [ 253.405266] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
> [ 253.405266] DR6: ffff0ff0 DR7: 00000400
> [ 253.405266] [<c0281406>] __delay+0x6/0x10
> [ 253.405266] [<c02857dc>] _raw_spin_lock+0xbc/0x140
> [ 253.405266] [<c02854b8>] spin_bug+0x18/0x100
> [ 253.405266] [<c0504a08>] _spin_lock_bh+0x58/0x70
> [ 253.405266] [<f885a3d5>] ath5k_tx+0x335/0x490 [ath5k]
> [ 253.405266] [<f885a3d5>] ath5k_tx+0x335/0x490 [ath5k]
> [ 253.405266] [<f885d150>] ath5k_hw_setup_4word_tx_desc+0x0/0x2a0 [ath5k]
> [ 253.405266] [<c04e577e>] __ieee80211_tx+0x3e/0x160
> [ 253.405266] [<c04e5bf7>] ieee80211_master_start_xmit+0x247/0x3e0
> [ 253.405266] [<c04e5b27>] ieee80211_master_start_xmit+0x177/0x3e0
> [ 253.405266] [<c042a35d>] dev_hard_start_xmit+0x27d/0x310
> [ 253.405266] [<c0438a41>] __qdisc_run+0x141/0x1e0
> [ 253.405266] [<c042cbc2>] dev_queue_xmit+0xb2/0x500
> [ 253.405266] [<c042cdc7>] dev_queue_xmit+0x2b7/0x500
> [ 253.405266] [<c042cb49>] dev_queue_xmit+0x39/0x500
> [ 253.405266] [<c04eb2d6>] mesh_path_error_tx+0xe6/0x100
> [ 253.405266] [<c04e9728>] mesh_plink_broken+0xc8/0x130
> [ 253.405266] [<c04e9660>] mesh_plink_broken+0x0/0x130
> [ 253.405266] [<c04ecf32>] rate_control_pid_tx_status+0x582/0x5a0
> [ 253.405266] [<c04ec9d5>] rate_control_pid_tx_status+0x25/0x5a0
> [ 253.405266] [<c04cfd60>] ieee80211_tx_status+0x240/0x4f0
> [ 253.405266] [<c04cfbd5>] ieee80211_tx_status+0xb5/0x4f0
> [ 253.405266] [<c04cfb20>] ieee80211_tx_status+0x0/0x4f0
> [ 253.405266] [<f8858f36>] ath5k_tasklet_tx+0x126/0x250 [ath5k]
> [ 253.405266] [<c0505035>] _spin_unlock+0x25/0x40
> [ 253.405266] [<c0126a76>] irq_exit+0x16/0x50
> [ 253.405266] [<c0126903>] tasklet_action+0x43/0x90
> [ 253.405266] [<c0126742>] __do_softirq+0x62/0xc0
> [ 253.405266] [<c01267e5>] do_softirq+0x45/0x50
> [ 253.405266] [<c0126aa4>] irq_exit+0x44/0x50
> [ 253.405266] [<c0105de6>] do_IRQ+0x46/0x90
> [ 253.405266] [<c02818c4>] trace_hardirqs_off_thunk+0xc/0x18
> [ 253.405266] [<c0103df8>] common_interrupt+0x28/0x30
> [ 253.405266] [<c02dc47c>] acpi_processor_idle+0x283/0x3ff
> [ 253.405266] [<c0101dff>] cpu_idle+0x2f/0x80
> [ 253.405266] =======================
After disable the kernel debugging option, this bug never be triggered
again, but obviously this problem is not be solved and I guess it is
some kinds of problem relative with "lock", BTW the performance
between two mesh node is very bad, I'll send a performance report in
another mail.
BR
yanbo
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-08-07 5:12 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1197ff4c0808060056q7e10e39cl41a5ea5a26b7cdd6@mail.gmail.com>
2008-08-06 13:56 ` [ath5k-devel] ath5k hang up in mesh mode Bob Copeland
2008-08-06 14:00 ` Johannes Berg
2008-08-07 2:45 ` YanBo
2008-08-07 5:12 ` YanBo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox