From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
To: <johannes@sipsolutions.net>, <johannes@sipsolutions.net>,
<linville@tuxdriver.com>
Cc: "Luis R. Rodriguez" <lrodriguez@atheros.com>,
<linux-wireless@vger.kernel.org>
Subject: [PATCH v3] cfg80211: add get reg command
Date: Wed, 28 Jan 2009 11:52:11 -0800 [thread overview]
Message-ID: <1233172331-15448-1-git-send-email-lrodriguez@atheros.com> (raw)
This lets userspace request to get the currently set
regulatory domain.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
This v3 removes introduction of reg_get_current_rd() and simply
accesses cfg80211_regdomain directly.
include/linux/nl80211.h | 4 ++
net/wireless/nl80211.c | 81 +++++++++++++++++++++++++++++++++++++++++++++++
net/wireless/reg.c | 2 +-
net/wireless/reg.h | 2 +
4 files changed, 88 insertions(+), 1 deletions(-)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 3357907..ef5c1d3 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -113,6 +113,8 @@
* @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
* %NL80211_ATTR_IFINDEX.
*
+ * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
+ * regulatory domain.
* @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
* after being queried by the kernel. CRDA replies by sending a regulatory
* domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
@@ -188,6 +190,8 @@ enum nl80211_commands {
NL80211_CMD_SET_MGMT_EXTRA_IE,
+ NL80211_CMD_GET_REG,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 3c6327d..e723580 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2094,6 +2094,81 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
#undef FILL_IN_MESH_PARAM_IF_SET
+static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info)
+{
+ struct sk_buff *msg;
+ void *hdr = NULL;
+ struct nlattr *nl_reg_rules;
+ unsigned int i;
+ int err = -EINVAL;
+
+ mutex_lock(&cfg80211_drv_mutex);
+
+ if (!cfg80211_regdomain)
+ goto out;
+
+ msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+ if (!msg) {
+ err = -ENOBUFS;
+ goto out;
+ }
+
+ hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
+ NL80211_CMD_GET_REG);
+ if (!hdr)
+ goto nla_put_failure;
+
+ NLA_PUT_STRING(msg, NL80211_ATTR_REG_ALPHA2,
+ cfg80211_regdomain->alpha2);
+
+ nl_reg_rules = nla_nest_start(msg, NL80211_ATTR_REG_RULES);
+ if (!nl_reg_rules)
+ goto nla_put_failure;
+
+ for (i = 0; i < cfg80211_regdomain->n_reg_rules; i++) {
+ struct nlattr *nl_reg_rule;
+ const struct ieee80211_reg_rule *reg_rule;
+ const struct ieee80211_freq_range *freq_range;
+ const struct ieee80211_power_rule *power_rule;
+
+ reg_rule = &cfg80211_regdomain->reg_rules[i];
+ freq_range = ®_rule->freq_range;
+ power_rule = ®_rule->power_rule;
+
+ nl_reg_rule = nla_nest_start(msg, i);
+ if (!nl_reg_rule)
+ goto nla_put_failure;
+
+ NLA_PUT_U32(msg, NL80211_ATTR_REG_RULE_FLAGS,
+ reg_rule->flags);
+ NLA_PUT_U32(msg, NL80211_ATTR_FREQ_RANGE_START,
+ freq_range->start_freq_khz);
+ NLA_PUT_U32(msg, NL80211_ATTR_FREQ_RANGE_END,
+ freq_range->end_freq_khz);
+ NLA_PUT_U32(msg, NL80211_ATTR_FREQ_RANGE_MAX_BW,
+ freq_range->max_bandwidth_khz);
+ NLA_PUT_U32(msg, NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+ power_rule->max_antenna_gain);
+ NLA_PUT_U32(msg, NL80211_ATTR_POWER_RULE_MAX_EIRP,
+ power_rule->max_eirp);
+
+ nla_nest_end(msg, nl_reg_rule);
+ }
+
+ nla_nest_end(msg, nl_reg_rules);
+
+ genlmsg_end(msg, hdr);
+ err = genlmsg_unicast(msg, info->snd_pid);
+ goto out;
+
+nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ err = -EMSGSIZE;
+out:
+ mutex_unlock(&cfg80211_drv_mutex);
+ return err;
+}
+
static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
{
struct nlattr *tb[NL80211_REG_RULE_ATTR_MAX + 1];
@@ -2334,6 +2409,12 @@ static struct genl_ops nl80211_ops[] = {
.flags = GENL_ADMIN_PERM,
},
{
+ .cmd = NL80211_CMD_GET_REG,
+ .doit = nl80211_get_reg,
+ .policy = nl80211_policy,
+ /* can be retrieved by unprivileged users */
+ },
+ {
.cmd = NL80211_CMD_SET_REG,
.doit = nl80211_set_reg,
.policy = nl80211_policy,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index f643d39..2323644 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -57,7 +57,7 @@ static u32 supported_bandwidths[] = {
/* Central wireless core regulatory domains, we only need two,
* the current one and a world regulatory domain in case we have no
* information to give us an alpha2 */
-static const struct ieee80211_regdomain *cfg80211_regdomain;
+const struct ieee80211_regdomain *cfg80211_regdomain;
/* We use this as a place for the rd structure built from the
* last parsed country IE to rest until CRDA gets back to us with
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index eb1dd5b..fe8c83f 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -1,6 +1,8 @@
#ifndef __NET_WIRELESS_REG_H
#define __NET_WIRELESS_REG_H
+extern const struct ieee80211_regdomain *cfg80211_regdomain;
+
bool is_world_regdom(const char *alpha2);
bool reg_is_valid_request(const char *alpha2);
--
1.6.1.rc3.51.g5832d
next reply other threads:[~2009-01-28 19:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-28 19:52 Luis R. Rodriguez [this message]
2009-01-28 20:36 ` [PATCH v3] cfg80211: add get reg command Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1233172331-15448-1-git-send-email-lrodriguez@atheros.com \
--to=lrodriguez@atheros.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox