From: Johannes Berg <johannes@sipsolutions.net>
To: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Cc: linville@tuxdriver.com, linux-wireless@vger.kernel.org
Subject: Re: [PATCH v3] cfg80211: add get reg command
Date: Wed, 28 Jan 2009 21:36:26 +0100 [thread overview]
Message-ID: <1233174986.16048.20.camel@johannes.local> (raw)
In-Reply-To: <1233172331-15448-1-git-send-email-lrodriguez@atheros.com>
[-- Attachment #1: Type: text/plain, Size: 5555 bytes --]
On Wed, 2009-01-28 at 11:52 -0800, Luis R. Rodriguez wrote:
> This lets userspace request to get the currently set
> regulatory domain.
>
> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
looks good to me.
Acked-by: Johannes Berg <johannes@sipsolutions.net>
> ---
>
> This v3 removes introduction of reg_get_current_rd() and simply
> accesses cfg80211_regdomain directly.
>
> include/linux/nl80211.h | 4 ++
> net/wireless/nl80211.c | 81 +++++++++++++++++++++++++++++++++++++++++++++++
> net/wireless/reg.c | 2 +-
> net/wireless/reg.h | 2 +
> 4 files changed, 88 insertions(+), 1 deletions(-)
>
> diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
> index 3357907..ef5c1d3 100644
> --- a/include/linux/nl80211.h
> +++ b/include/linux/nl80211.h
> @@ -113,6 +113,8 @@
> * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
> * %NL80211_ATTR_IFINDEX.
> *
> + * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
> + * regulatory domain.
> * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
> * after being queried by the kernel. CRDA replies by sending a regulatory
> * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
> @@ -188,6 +190,8 @@ enum nl80211_commands {
>
> NL80211_CMD_SET_MGMT_EXTRA_IE,
>
> + NL80211_CMD_GET_REG,
> +
> /* add new commands above here */
>
> /* used to define NL80211_CMD_MAX below */
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index 3c6327d..e723580 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -2094,6 +2094,81 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
>
> #undef FILL_IN_MESH_PARAM_IF_SET
>
> +static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info)
> +{
> + struct sk_buff *msg;
> + void *hdr = NULL;
> + struct nlattr *nl_reg_rules;
> + unsigned int i;
> + int err = -EINVAL;
> +
> + mutex_lock(&cfg80211_drv_mutex);
> +
> + if (!cfg80211_regdomain)
> + goto out;
> +
> + msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
> + if (!msg) {
> + err = -ENOBUFS;
> + goto out;
> + }
> +
> + hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
> + NL80211_CMD_GET_REG);
> + if (!hdr)
> + goto nla_put_failure;
> +
> + NLA_PUT_STRING(msg, NL80211_ATTR_REG_ALPHA2,
> + cfg80211_regdomain->alpha2);
> +
> + nl_reg_rules = nla_nest_start(msg, NL80211_ATTR_REG_RULES);
> + if (!nl_reg_rules)
> + goto nla_put_failure;
> +
> + for (i = 0; i < cfg80211_regdomain->n_reg_rules; i++) {
> + struct nlattr *nl_reg_rule;
> + const struct ieee80211_reg_rule *reg_rule;
> + const struct ieee80211_freq_range *freq_range;
> + const struct ieee80211_power_rule *power_rule;
> +
> + reg_rule = &cfg80211_regdomain->reg_rules[i];
> + freq_range = ®_rule->freq_range;
> + power_rule = ®_rule->power_rule;
> +
> + nl_reg_rule = nla_nest_start(msg, i);
> + if (!nl_reg_rule)
> + goto nla_put_failure;
> +
> + NLA_PUT_U32(msg, NL80211_ATTR_REG_RULE_FLAGS,
> + reg_rule->flags);
> + NLA_PUT_U32(msg, NL80211_ATTR_FREQ_RANGE_START,
> + freq_range->start_freq_khz);
> + NLA_PUT_U32(msg, NL80211_ATTR_FREQ_RANGE_END,
> + freq_range->end_freq_khz);
> + NLA_PUT_U32(msg, NL80211_ATTR_FREQ_RANGE_MAX_BW,
> + freq_range->max_bandwidth_khz);
> + NLA_PUT_U32(msg, NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
> + power_rule->max_antenna_gain);
> + NLA_PUT_U32(msg, NL80211_ATTR_POWER_RULE_MAX_EIRP,
> + power_rule->max_eirp);
> +
> + nla_nest_end(msg, nl_reg_rule);
> + }
> +
> + nla_nest_end(msg, nl_reg_rules);
> +
> + genlmsg_end(msg, hdr);
> + err = genlmsg_unicast(msg, info->snd_pid);
> + goto out;
> +
> +nla_put_failure:
> + genlmsg_cancel(msg, hdr);
> + err = -EMSGSIZE;
> +out:
> + mutex_unlock(&cfg80211_drv_mutex);
> + return err;
> +}
> +
> static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
> {
> struct nlattr *tb[NL80211_REG_RULE_ATTR_MAX + 1];
> @@ -2334,6 +2409,12 @@ static struct genl_ops nl80211_ops[] = {
> .flags = GENL_ADMIN_PERM,
> },
> {
> + .cmd = NL80211_CMD_GET_REG,
> + .doit = nl80211_get_reg,
> + .policy = nl80211_policy,
> + /* can be retrieved by unprivileged users */
> + },
> + {
> .cmd = NL80211_CMD_SET_REG,
> .doit = nl80211_set_reg,
> .policy = nl80211_policy,
> diff --git a/net/wireless/reg.c b/net/wireless/reg.c
> index f643d39..2323644 100644
> --- a/net/wireless/reg.c
> +++ b/net/wireless/reg.c
> @@ -57,7 +57,7 @@ static u32 supported_bandwidths[] = {
> /* Central wireless core regulatory domains, we only need two,
> * the current one and a world regulatory domain in case we have no
> * information to give us an alpha2 */
> -static const struct ieee80211_regdomain *cfg80211_regdomain;
> +const struct ieee80211_regdomain *cfg80211_regdomain;
>
> /* We use this as a place for the rd structure built from the
> * last parsed country IE to rest until CRDA gets back to us with
> diff --git a/net/wireless/reg.h b/net/wireless/reg.h
> index eb1dd5b..fe8c83f 100644
> --- a/net/wireless/reg.h
> +++ b/net/wireless/reg.h
> @@ -1,6 +1,8 @@
> #ifndef __NET_WIRELESS_REG_H
> #define __NET_WIRELESS_REG_H
>
> +extern const struct ieee80211_regdomain *cfg80211_regdomain;
> +
> bool is_world_regdom(const char *alpha2);
> bool reg_is_valid_request(const char *alpha2);
>
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
prev parent reply other threads:[~2009-01-28 20:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-28 19:52 [PATCH v3] cfg80211: add get reg command Luis R. Rodriguez
2009-01-28 20:36 ` Johannes Berg [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1233174986.16048.20.camel@johannes.local \
--to=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=lrodriguez@atheros.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox