[PATCH 4/5] ath9k: wake hardware for interface IBSS/AP/Mesh removal

["Luis R. Rodriguez" <lrodriguez@atheros.com>]

When we remove a IBSS/AP/Mesh interface we stop DMA
but to do this we should ensure hardware is on. Awaken
the device prior to these calls. This should ensure
DMA is stopped upon suspend and plain device removal.

Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
 drivers/net/wireless/ath/ath9k/main.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 1464ded..9a4d9b9 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2643,8 +2643,10 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
+		ath9k_ps_wakeup(sc);
 		ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
 		ath_beacon_return(sc, avp);
+		ath9k_ps_restore(sc);
 	}
 
 	sc->sc_flags &= ~SC_OP_BEACONS;
-- 
1.6.3.3