From: Reinette Chatre <reinette.chatre@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
ipw3945-devel@lists.sourceforge.net,
Shanyu Zhao <shanyu.zhao@intel.com>,
Jay Sternberg <jay.e.sternberg@intel.com>,
Reinette Chatre <reinette.chatre@intel.com>
Subject: [PATCH 11/17] iwlwifi: enable remaining 6000 Gen2 devices
Date: Thu, 13 May 2010 14:49:53 -0700 [thread overview]
Message-ID: <1273787399-9280-12-git-send-email-reinette.chatre@intel.com> (raw)
In-Reply-To: <1273787399-9280-1-git-send-email-reinette.chatre@intel.com>
From: Shanyu Zhao <shanyu.zhao@intel.com>
This patch enables all remaining 6000 series Gen2 devices.
To work-around a firmware crash problem, we disable sending
bt coex command for 6000g2b series devices.
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-6000.c | 252 +++++++++++++++++++++++++++
drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c | 4 +-
drivers/net/wireless/iwlwifi/iwl-agn.c | 17 ++
drivers/net/wireless/iwlwifi/iwl-agn.h | 4 +
drivers/net/wireless/iwlwifi/iwl-dev.h | 7 +
5 files changed, 282 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 9fbf54c..9247594 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -71,6 +71,10 @@
#define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode"
#define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api)
+#define IWL6000G2B_FW_PRE "iwlwifi-6000g2b-"
+#define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode"
+#define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api)
+
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
@@ -335,6 +339,25 @@ static const struct iwl_ops iwl6000_ops = {
.led = &iwlagn_led_ops,
};
+static void do_not_send_bt_config(struct iwl_priv *priv)
+{
+}
+
+static struct iwl_hcmd_ops iwl6000g2b_hcmd = {
+ .rxon_assoc = iwlagn_send_rxon_assoc,
+ .commit_rxon = iwl_commit_rxon,
+ .set_rxon_chain = iwl_set_rxon_chain,
+ .set_tx_ant = iwlagn_send_tx_ant_config,
+ .send_bt_config = do_not_send_bt_config,
+};
+
+static const struct iwl_ops iwl6000g2b_ops = {
+ .lib = &iwl6000_lib,
+ .hcmd = &iwl6000g2b_hcmd,
+ .utils = &iwlagn_hcmd_utils,
+ .led = &iwlagn_led_ops,
+};
+
static struct iwl_lib_ops iwl6050_lib = {
.set_hw_params = iwl6050_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
@@ -445,6 +468,234 @@ struct iwl_cfg iwl6000g2a_2agn_cfg = {
.chain_noise_calib_by_driver = true,
};
+struct iwl_cfg iwl6000g2a_2abg_cfg = {
+ .name = "6000 Series 2x2 ABG Gen2a",
+ .fw_name_pre = IWL6000G2A_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_A|IWL_SKU_G,
+ .ops = &iwl6000_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2a_2bg_cfg = {
+ .name = "6000 Series 2x2 BG Gen2a",
+ .fw_name_pre = IWL6000G2A_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G,
+ .ops = &iwl6000_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2b_2agn_cfg = {
+ .name = "6000 Series 2x2 AGN Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
+ .led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2b_2abg_cfg = {
+ .name = "6000 Series 2x2 ABG Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_A|IWL_SKU_G,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2b_2bg_cfg = {
+ .name = "6000 Series 2x2 BG Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2b_bgn_cfg = {
+ .name = "6000 Series 1x2 BGN Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G|IWL_SKU_N,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_A,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .ht_greenfield_support = true,
+ .led_compensation = 51,
+ .use_rts_for_ht = true, /* use rts/cts protection */
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
+struct iwl_cfg iwl6000g2b_bg_cfg = {
+ .name = "6000 Series 1x2 BG Gen2b",
+ .fw_name_pre = IWL6000G2B_FW_PRE,
+ .ucode_api_max = IWL6000G2_UCODE_API_MAX,
+ .ucode_api_min = IWL6000G2_UCODE_API_MIN,
+ .sku = IWL_SKU_G,
+ .ops = &iwl6000g2b_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .mod_params = &iwlagn_mod_params,
+ .valid_tx_ant = ANT_A,
+ .valid_rx_ant = ANT_AB,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .pa_type = IWL_PA_SYSTEM,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .monitor_recover_period = IWL_MONITORING_PERIOD,
+ .max_event_log_size = 512,
+};
+
/*
* "i": Internal configuration, use internal Power Amplifier
*/
@@ -667,3 +918,4 @@ struct iwl_cfg iwl6000_3agn_cfg = {
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
index 44ef5d9..25851ec 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
@@ -37,7 +37,7 @@
#include "iwl-io.h"
#include "iwl-agn.h"
-static int iwlagn_send_rxon_assoc(struct iwl_priv *priv)
+int iwlagn_send_rxon_assoc(struct iwl_priv *priv)
{
int ret = 0;
struct iwl5000_rxon_assoc_cmd rxon_assoc;
@@ -84,7 +84,7 @@ static int iwlagn_send_rxon_assoc(struct iwl_priv *priv)
return ret;
}
-static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
+int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
{
struct iwl_tx_ant_config_cmd tx_ant_cmd = {
.valid = cpu_to_le32(valid_tx_ant),
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 845d0ee..f910246 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -4059,6 +4059,23 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
{IWL_PCI_DEVICE(0x0082, 0x1201, iwl6000g2a_2agn_cfg)},
{IWL_PCI_DEVICE(0x0085, 0x1211, iwl6000g2a_2agn_cfg)},
{IWL_PCI_DEVICE(0x0082, 0x1221, iwl6000g2a_2agn_cfg)},
+ {IWL_PCI_DEVICE(0x0082, 0x1206, iwl6000g2a_2abg_cfg)},
+ {IWL_PCI_DEVICE(0x0085, 0x1216, iwl6000g2a_2abg_cfg)},
+ {IWL_PCI_DEVICE(0x0082, 0x1226, iwl6000g2a_2abg_cfg)},
+ {IWL_PCI_DEVICE(0x0082, 0x1207, iwl6000g2a_2bg_cfg)},
+
+/* 6x00 Series Gen2b */
+ {IWL_PCI_DEVICE(0x008F, 0x5105, iwl6000g2b_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0090, 0x5115, iwl6000g2b_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x008F, 0x5125, iwl6000g2b_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x008F, 0x5107, iwl6000g2b_bg_cfg)},
+ {IWL_PCI_DEVICE(0x008F, 0x5201, iwl6000g2b_2agn_cfg)},
+ {IWL_PCI_DEVICE(0x0090, 0x5211, iwl6000g2b_2agn_cfg)},
+ {IWL_PCI_DEVICE(0x008F, 0x5221, iwl6000g2b_2agn_cfg)},
+ {IWL_PCI_DEVICE(0x008F, 0x5206, iwl6000g2b_2abg_cfg)},
+ {IWL_PCI_DEVICE(0x0090, 0x5216, iwl6000g2b_2abg_cfg)},
+ {IWL_PCI_DEVICE(0x008F, 0x5226, iwl6000g2b_2abg_cfg)},
+ {IWL_PCI_DEVICE(0x008F, 0x5207, iwl6000g2b_2bg_cfg)},
/* 6x50 WiFi/WiMax Series */
{IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)},
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h
index fbbefe1..12c198f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.h
@@ -180,4 +180,8 @@ void iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif);
int iwlagn_manage_ibss_station(struct iwl_priv *priv,
struct ieee80211_vif *vif, bool add);
+/* hcmd */
+int iwlagn_send_rxon_assoc(struct iwl_priv *priv);
+int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant);
+
#endif /* __iwl_agn_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index fdd0430..04296fd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -58,6 +58,13 @@ extern struct iwl_cfg iwl5100_abg_cfg;
extern struct iwl_cfg iwl5150_agn_cfg;
extern struct iwl_cfg iwl5150_abg_cfg;
extern struct iwl_cfg iwl6000g2a_2agn_cfg;
+extern struct iwl_cfg iwl6000g2a_2abg_cfg;
+extern struct iwl_cfg iwl6000g2a_2bg_cfg;
+extern struct iwl_cfg iwl6000g2b_bgn_cfg;
+extern struct iwl_cfg iwl6000g2b_bg_cfg;
+extern struct iwl_cfg iwl6000g2b_2agn_cfg;
+extern struct iwl_cfg iwl6000g2b_2abg_cfg;
+extern struct iwl_cfg iwl6000g2b_2bg_cfg;
extern struct iwl_cfg iwl6000i_2agn_cfg;
extern struct iwl_cfg iwl6000i_2abg_cfg;
extern struct iwl_cfg iwl6000i_2bg_cfg;
--
1.6.3.3
next prev parent reply other threads:[~2010-05-13 21:50 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-13 21:49 [PATCH 00/17] iwlwifi updates for 2.6.35 Reinette Chatre
2010-05-13 21:49 ` [PATCH 01/17] iwlwifi: introduce iwl_sta_id_or_broadcast Reinette Chatre
2010-05-13 21:49 ` [PATCH 02/17] iwlwifi: move _agn statistics related structure Reinette Chatre
2010-05-13 21:49 ` [PATCH 03/17] iwlwifi: separate statistics flag function for agn & 3945 Reinette Chatre
2010-05-13 21:49 ` [PATCH 04/17] iwlwifi: don't crash on firmware file missing info Reinette Chatre
2010-05-13 21:49 ` [PATCH 05/17] iwl3945: remove sequence number assignment Reinette Chatre
2010-05-13 21:49 ` [PATCH 06/17] iwlwifi: move iwl_free_tfds_in_queue to iwlagn Reinette Chatre
2010-05-13 21:49 ` [PATCH 07/17] iwlwifi: improve station debugfs Reinette Chatre
2010-05-13 21:49 ` [PATCH 08/17] iwlwifi: remove IWL_MULTICAST_ID Reinette Chatre
2010-05-13 21:49 ` [PATCH 09/17] iwlwifi: fix and add missing sta_lock usage Reinette Chatre
2010-05-13 21:49 ` [PATCH 10/17] iwlagn: use firmware event/error log information Reinette Chatre
2010-05-13 21:49 ` Reinette Chatre [this message]
2010-05-13 21:49 ` [PATCH 12/17] iwlwifi: code cleanup for _agn devices Reinette Chatre
2010-05-13 21:49 ` [PATCH 13/17] iwlwifi: modify out-dated comments Reinette Chatre
2010-05-13 21:49 ` [PATCH 14/17] iwlwifi: split debug and debugfs options Reinette Chatre
2010-05-13 21:49 ` [PATCH 15/17] iwlwifi: use proper short slot/preamble settings Reinette Chatre
2010-05-13 21:49 ` [PATCH 16/17] iwlwifi: move ucode related function to iwl-agn-ucode.c Reinette Chatre
2010-05-13 21:49 ` [PATCH 17/17] iwlwifi: add new PCI IDs for 6000g2 devices Reinette Chatre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1273787399-9280-12-git-send-email-reinette.chatre@intel.com \
--to=reinette.chatre@intel.com \
--cc=ipw3945-devel@lists.sourceforge.net \
--cc=jay.e.sternberg@intel.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=shanyu.zhao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox