From: Felix Fietkau <nbd@openwrt.org>
To: linux-wireless@vger.kernel.org
Cc: linville@tuxdriver.com, lrodriguez@atheros.com
Subject: [PATCH 1/6] ath9k_hw: fix a few inconsistencies in initval array names
Date: Fri, 2 Jul 2010 00:09:47 +0200 [thread overview]
Message-ID: <1278022192-83277-1-git-send-email-nbd@openwrt.org> (raw)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/ar9001_initvals.h | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_hw.c | 12 ++++++------
drivers/net/wireless/ath/ath9k/ar9002_initvals.h | 4 ++--
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9001_initvals.h b/drivers/net/wireless/ath/ath9k/ar9001_initvals.h
index 0b94bd3..760be1f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9001_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9001_initvals.h
@@ -1217,7 +1217,7 @@ static const u32 ar5416Addac_9160[][2] = {
{0x000098cc, 0x00000000 },
};
-static const u32 ar5416Addac_91601_1[][2] = {
+static const u32 ar5416Addac_9160_1_1[][2] = {
{0x0000989c, 0x00000000 },
{0x0000989c, 0x00000000 },
{0x0000989c, 0x00000000 },
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index 0317ac9..75b80d1 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -179,8 +179,8 @@ static void ar9002_hw_init_mode_regs(struct ath_hw *ah)
ARRAY_SIZE(ar5416Bank7_9160), 2);
if (AR_SREV_9160_11(ah)) {
INIT_INI_ARRAY(&ah->iniAddac,
- ar5416Addac_91601_1,
- ARRAY_SIZE(ar5416Addac_91601_1), 2);
+ ar5416Addac_9160_1_1,
+ ARRAY_SIZE(ar5416Addac_9160_1_1), 2);
} else {
INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9160,
ARRAY_SIZE(ar5416Addac_9160), 2);
@@ -239,12 +239,12 @@ void ar9002_hw_cck_chan14_spread(struct ath_hw *ah)
{
if (AR_SREV_9287_11_OR_LATER(ah)) {
INIT_INI_ARRAY(&ah->iniCckfirNormal,
- ar9287Common_normal_cck_fir_coeff_92871_1,
- ARRAY_SIZE(ar9287Common_normal_cck_fir_coeff_92871_1),
+ ar9287Common_normal_cck_fir_coeff_9287_1_1,
+ ARRAY_SIZE(ar9287Common_normal_cck_fir_coeff_9287_1_1),
2);
INIT_INI_ARRAY(&ah->iniCckfirJapan2484,
- ar9287Common_japan_2484_cck_fir_coeff_92871_1,
- ARRAY_SIZE(ar9287Common_japan_2484_cck_fir_coeff_92871_1),
+ ar9287Common_japan_2484_cck_fir_coeff_9287_1_1,
+ ARRAY_SIZE(ar9287Common_japan_2484_cck_fir_coeff_9287_1_1),
2);
}
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_initvals.h b/drivers/net/wireless/ath/ath9k/ar9002_initvals.h
index 8ab24ee..620fa8c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9002_initvals.h
@@ -4142,13 +4142,13 @@ static const u32 ar9287Common_9287_1_1[][2] = {
* registers be programmed differently from the channel between 2412 and
* 2472 MHz.
*/
-static const u32 ar9287Common_normal_cck_fir_coeff_92871_1[][2] = {
+static const u32 ar9287Common_normal_cck_fir_coeff_9287_1_1[][2] = {
{ 0x0000a1f4, 0x00fffeff },
{ 0x0000a1f8, 0x00f5f9ff },
{ 0x0000a1fc, 0xb79f6427 },
};
-static const u32 ar9287Common_japan_2484_cck_fir_coeff_92871_1[][2] = {
+static const u32 ar9287Common_japan_2484_cck_fir_coeff_9287_1_1[][2] = {
{ 0x0000a1f4, 0x00000000 },
{ 0x0000a1f8, 0xefff0301 },
{ 0x0000a1fc, 0xca9228ee },
--
1.6.4.2
next reply other threads:[~2010-07-01 22:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-01 22:09 Felix Fietkau [this message]
2010-07-01 22:09 ` [PATCH 2/6] ath9k_hw: reformat the ar5008, ar9001 and ar9002 initvals to match ar9003 Felix Fietkau
2010-07-01 22:09 ` [PATCH 3/6] ath9k_hw: sync initvals for ar9001 and ar9002 with Atheros Felix Fietkau
2010-07-01 22:09 ` [PATCH 4/6] ath9k_hw: sanitize noise floor values properly on all chips Felix Fietkau
2010-07-01 22:09 ` [PATCH 5/6] ath9k_hw: clean up the noise floor calibration code to reduce code duplication Felix Fietkau
2010-07-01 22:09 ` [PATCH 6/6] ath9k: fix false positives in the baseband hang check Felix Fietkau
2010-07-03 0:53 ` Björn Smedman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1278022192-83277-1-git-send-email-nbd@openwrt.org \
--to=nbd@openwrt.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=lrodriguez@atheros.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox