[PATCH] wl12xx: wakeup chip from ELP during scan

[PATCH] wl12xx: wakeup chip from ELP during scan

[Arik Nemtsov]

Commands are sometimes sent to FW on scan completion. Make sure the chip
is awake to receive them. Sending commands while the chip is in ELP
can cause SDIO read errors and/or crash the FW.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
---
 drivers/net/wireless/wl12xx/cmd.c  |    1 +
 drivers/net/wireless/wl12xx/scan.c |   20 ++++++++++++++------
 2 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index 97ffd7a..f0aa7ab 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -63,6 +63,7 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 	cmd->status = 0;
 
 	WARN_ON(len % 4 != 0);
+	WARN_ON(test_bit(WL1271_FLAG_IN_ELP, &wl->flags));
 
 	wl1271_write(wl, wl->cmd_box_addr, buf, len, false);
 
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 6f897b9..4c26977 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -27,6 +27,7 @@
 #include "cmd.h"
 #include "scan.h"
 #include "acx.h"
+#include "ps.h"
 
 void wl1271_scan_complete_work(struct work_struct *work)
 {
@@ -40,10 +41,11 @@ void wl1271_scan_complete_work(struct work_struct *work)
 
 	mutex_lock(&wl->mutex);
 
-	if (wl->scan.state == WL1271_SCAN_STATE_IDLE) {
-		mutex_unlock(&wl->mutex);
-		return;
-	}
+	if (wl->state == WL1271_STATE_OFF)
+		goto out;
+
+	if (wl->scan.state == WL1271_SCAN_STATE_IDLE)
+		goto out;
 
 	wl->scan.state = WL1271_SCAN_STATE_IDLE;
 	kfree(wl->scan.scanned_ch);
@@ -52,13 +54,19 @@ void wl1271_scan_complete_work(struct work_struct *work)
 	ieee80211_scan_completed(wl->hw, false);
 
 	/* restore hardware connection monitoring template */
-	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
-		wl1271_cmd_build_ap_probe_req(wl, wl->probereq);
+	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) {
+		if (wl1271_ps_elp_wakeup(wl, false) == 0) {
+			wl1271_cmd_build_ap_probe_req(wl, wl->probereq);
+			wl1271_ps_elp_sleep(wl);
+		}
+	}
 
 	if (wl->scan.failed) {
 		wl1271_info("Scan completed due to error.");
 		ieee80211_queue_work(wl->hw, &wl->recovery_work);
 	}
+
+out:
 	mutex_unlock(&wl->mutex);
 
 }
-- 
1.7.1

Re: [PATCH] wl12xx: wakeup chip from ELP during scan

[Luciano Coelho]

On Tue, 2011-03-01 at 12:27 +0200, Arik Nemtsov wrote:
> Commands are sometimes sent to FW on scan completion. Make sure the chip
> is awake to receive them. Sending commands while the chip is in ELP
> can cause SDIO read errors and/or crash the FW.
> 
> Signed-off-by: Arik Nemtsov <arik@wizery.com>
> Signed-off-by: Ido Yariv <ido@wizery.com>
> ---

Applied, thanks Arik!

-- 
Cheers,
Luca.