[PATCHv2 2/2] mac80211: Don't use a buf_size=0 in ADDBA requests

[Helmut Schaa <helmut.schaa@googlemail.com>]

According to 802.11-2007, 7.3.1.14 it is compliant to use a buf_size of
0 in ADDBA requests. But some devices (AVM Fritz Stick N) arn't able to
handle that correctly and will reply with an ADDBA reponse with a
buf_size of 0 which in turn will disallow BA sessions for these
devices.

To work around this problem, initialize hw.max_tx_aggregation_subframes
to the maximum AMPDU buffer size 0x40.

Using 0 as default for the bufsize was introduced in commit
5dd36bc933e8be84f8369ac64505a2938f9ce036 (mac80211: allow advertising
correct maximum aggregate size).

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
---

 net/mac80211/main.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 866f269..104fdd9 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -608,6 +608,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 	local->hw.max_rates = 1;
 	local->hw.max_report_rates = 0;
 	local->hw.max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
+	local->hw.max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
 	local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
 	local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
 	local->user_power_level = -1;
-- 
1.7.3.4