[PATCH v3] ath9k_hw: extend GPIO pin select mask for rfkill

[PATCH v3] ath9k_hw: extend GPIO pin select mask for rfkill

[Mohammed Shafi Shajakhan]

From: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>

this extends the bits for rf kill GPIO selection to [7:2] from [4:2] as
we use GPIO pin 11 as rfkill for AR9480 and also remove few unused
macros

Cc: Wilson Tsao <wtsao@qca.qualcomm.com>
Cc: "Hu, Russell" <rhu@qca.qualcomm.com>
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/eeprom.h |    7 +------
 1 files changed, 1 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index a3c7d0c..5d92f96 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -104,16 +104,11 @@
 #define OLC_FOR_AR9287_10_LATER (AR_SREV_9287_11_OR_LATER(ah) && \
 				 ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
 
-#define AR_EEPROM_RFSILENT_GPIO_SEL     0x001c
-#define AR_EEPROM_RFSILENT_GPIO_SEL_S   2
-#define AR_EEPROM_RFSILENT_POLARITY     0x0002
-#define AR_EEPROM_RFSILENT_POLARITY_S   1
-
 #define EEP_RFSILENT_ENABLED        0x0001
 #define EEP_RFSILENT_ENABLED_S      0
 #define EEP_RFSILENT_POLARITY       0x0002
 #define EEP_RFSILENT_POLARITY_S     1
-#define EEP_RFSILENT_GPIO_SEL       0x001c
+#define EEP_RFSILENT_GPIO_SEL       (AR_SREV_9480(ah) ? 0x00fc : 0x001c)
 #define EEP_RFSILENT_GPIO_SEL_S     2
 
 #define AR5416_OPFLAGS_11A           0x01
-- 
1.7.0.4