Linux wireless drivers development
 help / color / mirror / Atom feed
* [PATCH 01/14] ath9k_hw: Updated ar9003 initval table for AR9380
@ 2011-10-07 11:47 Rajkumar Manoharan
  2011-10-07 11:47 ` [PATCH 02/14] ath9k_hw: Update AR9003 initval to improve phase noise Rajkumar Manoharan
                   ` (12 more replies)
  0 siblings, 13 replies; 18+ messages in thread
From: Rajkumar Manoharan @ 2011-10-07 11:47 UTC (permalink / raw)
  To: linville; +Cc: linux-wireless, Rajkumar Manoharan

The ar9003 table is updated to increase XLNA BIAS
output driver strengh.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
---
 .../net/wireless/ath/ath9k/ar9003_2p2_initvals.h   |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index 08e9341..02be24e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -24,11 +24,11 @@ static const u32 ar9300_2p2_radio_postamble[][5] = {
 	{0x0001609c, 0x0dd08f29, 0x0dd08f29, 0x0b283f31, 0x0b283f31},
 	{0x000160ac, 0xa4653c00, 0xa4653c00, 0x24652800, 0x24652800},
 	{0x000160b0, 0x03284f3e, 0x03284f3e, 0x05d08f20, 0x05d08f20},
-	{0x0001610c, 0x08000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0001610c, 0xc8000000, 0xc0000000, 0xc0000000, 0xc0000000},
 	{0x00016140, 0x10804008, 0x10804008, 0x50804008, 0x50804008},
-	{0x0001650c, 0x08000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0001650c, 0xc8000000, 0xc0000000, 0xc0000000, 0xc0000000},
 	{0x00016540, 0x10804008, 0x10804008, 0x50804008, 0x50804008},
-	{0x0001690c, 0x08000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0001690c, 0xc8000000, 0xc0000000, 0xc0000000, 0xc0000000},
 	{0x00016940, 0x10804008, 0x10804008, 0x50804008, 0x50804008},
 };
 
-- 
1.7.7


^ permalink raw reply related	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2011-10-07 16:28 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-07 11:47 [PATCH 01/14] ath9k_hw: Updated ar9003 initval table for AR9380 Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 02/14] ath9k_hw: Update AR9003 initval to improve phase noise Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 03/14] ath9k_hw: Updated AR9003 tx gain table for 5GHz Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 04/14] ath9k_hw: Improve fast channel change for AR9003 chips Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 05/14] ath9k_hw: Add support to reuse TxIQ cal measurements Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 06/14] ath9k_hw: Add support to reuse Carrier leak calibration Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 07/14] ath9k_hw: Cleanup Tx calibrations for AR9003 chips Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 08/14] ath9k_hw: Support fast channel change on 5GHz " Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 09/14] ath9k_hw: Fix ASPM L1 issue for AR9480 Rajkumar Manoharan
2011-10-07 15:49   ` Luis R. Rodriguez
2011-10-07 16:27     ` Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 10/14] ath9k_hw: Update normal/min noise floor value " Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 11/14] ath9k_hw: Add radio retention support " Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 12/14] ath9k_hw: Do fast channel change based on reusable calibration results Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 13/14] ath9k_hw: Rename AR9480 -> AR9462 initvals Rajkumar Manoharan
2011-10-07 15:47   ` Luis R. Rodriguez
2011-10-07 16:25     ` Rajkumar Manoharan
2011-10-07 11:47 ` [PATCH 14/14] ath9k: Rename AR9480 into AR9462 Rajkumar Manoharan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox