Linux wireless drivers development
 help / color / mirror / Atom feed
From: Luciano Coelho <coelho@ti.com>
To: linux-wireless@vger.kernel.org
Cc: arik@wizery.com, coelho@ti.com
Subject: [PATCH 20/24] wlcore/wl12xx: set HT capabilities per chip-family
Date: Wed, 11 Apr 2012 22:53:36 +0300	[thread overview]
Message-ID: <1334174020-18957-21-git-send-email-coelho@ti.com> (raw)
In-Reply-To: <1334174020-18957-1-git-send-email-coelho@ti.com>

From: Arik Nemtsov <arik@wizery.com>

Set HT capabilities in the low-level HW driver. These are then used by
wlcore when registering with mac80211.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
 drivers/net/wireless/ti/wl12xx/main.c   |   14 ++++++++++++++
 drivers/net/wireless/ti/wlcore/main.c   |   22 ++++------------------
 drivers/net/wireless/ti/wlcore/wlcore.h |    3 +++
 3 files changed, 21 insertions(+), 18 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index f22cd55..ec94ad6 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1291,6 +1291,19 @@ static struct wlcore_ops wl12xx_ops = {
 	.get_mac		= wl12xx_get_mac,
 };
 
+static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
+	.cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
+	       (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT),
+	.ht_supported = true,
+	.ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K,
+	.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8,
+	.mcs = {
+		.rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
+		.rx_highest = cpu_to_le16(72),
+		.tx_params = IEEE80211_HT_MCS_TX_DEFINED,
+		},
+};
+
 static int __devinit wl12xx_probe(struct platform_device *pdev)
 {
 	struct wl1271 *wl;
@@ -1313,6 +1326,7 @@ static int __devinit wl12xx_probe(struct platform_device *pdev)
 	wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
 	wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX;
 	wl->hw_min_ht_rate = WL12XX_CONF_HW_RXTX_RATE_MCS0;
+	memcpy(&wl->ht_cap, &wl12xx_ht_cap, sizeof(wl12xx_ht_cap));
 	wl12xx_conf_init(wl);
 
 	return wlcore_probe(wl, pdev);
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index d351c8f..ef0d04e 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -4256,29 +4256,12 @@ static struct ieee80211_channel wl1271_channels[] = {
 	{ .hw_value = 14, .center_freq = 2484, .max_power = 25 },
 };
 
-/* 11n STA capabilities */
-#define HW_RX_HIGHEST_RATE	72
-
-#define WL12XX_HT_CAP { \
-	.cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | \
-	       (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT), \
-	.ht_supported = true, \
-	.ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, \
-	.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, \
-	.mcs = { \
-		.rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, \
-		.rx_highest = cpu_to_le16(HW_RX_HIGHEST_RATE), \
-		.tx_params = IEEE80211_HT_MCS_TX_DEFINED, \
-		}, \
-}
-
 /* can't be const, mac80211 writes to this */
 static struct ieee80211_supported_band wl1271_band_2ghz = {
 	.channels = wl1271_channels,
 	.n_channels = ARRAY_SIZE(wl1271_channels),
 	.bitrates = wl1271_rates,
 	.n_bitrates = ARRAY_SIZE(wl1271_rates),
-	.ht_cap	= WL12XX_HT_CAP,
 };
 
 /* 5 GHz data rates for WL1273 */
@@ -4352,7 +4335,6 @@ static struct ieee80211_supported_band wl1271_band_5ghz = {
 	.n_channels = ARRAY_SIZE(wl1271_channels_5ghz),
 	.bitrates = wl1271_rates_5ghz,
 	.n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz),
-	.ht_cap	= WL12XX_HT_CAP,
 };
 
 static const struct ieee80211_ops wl1271_ops = {
@@ -4729,8 +4711,12 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
 	 */
 	memcpy(&wl->bands[IEEE80211_BAND_2GHZ], &wl1271_band_2ghz,
 	       sizeof(wl1271_band_2ghz));
+	memcpy(&wl->bands[IEEE80211_BAND_2GHZ].ht_cap, &wl->ht_cap,
+	       sizeof(wl->ht_cap));
 	memcpy(&wl->bands[IEEE80211_BAND_5GHZ], &wl1271_band_5ghz,
 	       sizeof(wl1271_band_5ghz));
+	memcpy(&wl->bands[IEEE80211_BAND_5GHZ].ht_cap, &wl->ht_cap,
+	       sizeof(wl->ht_cap));
 
 	wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 		&wl->bands[IEEE80211_BAND_2GHZ];
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 0660f75..1c2d81f 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -342,6 +342,9 @@ struct wl1271 {
 
 	/* this HW rate and below are considered HT rates for this chip */
 	u8 hw_min_ht_rate;
+
+	/* HW HT (11n) capabilities */
+	struct ieee80211_sta_ht_cap ht_cap;
 };
 
 int __devinit wlcore_probe(struct wl1271 *wl, struct platform_device *pdev);
-- 
1.7.5.4


  parent reply	other threads:[~2012-04-11 19:54 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-11 19:53 [PATCH 00/24] wl12xx/wl1251/wlcore: reorganize drivers part 2 Luciano Coelho
2012-04-11 19:53 ` [PATCH 01/24] wlcore/wl12xx: set the number of Tx descriptors per chip family Luciano Coelho
2012-04-11 19:53 ` [PATCH 02/24] wlcore/wl12xx: change GEM Tx-spare blocks per-vif Luciano Coelho
2012-04-11 19:53 ` [PATCH 03/24] wlcore/wl12xx: add hw op for calculating hw block count per packet Luciano Coelho
2012-04-11 19:53 ` [PATCH 04/24] wlcore/wl12xx: add hw op for setting blocks in hw_tx_desc Luciano Coelho
2012-04-11 19:53 ` [PATCH 05/24] wlcore/wl12xx: add hw op for setting frame length in tx_hw_desc Luciano Coelho
2012-04-11 19:53 ` [PATCH 06/24] wlcore/wl12xx: add global elements to convert hw-rates to standard rates Luciano Coelho
2012-04-11 19:53 ` [PATCH 07/24] wlcore: introduce Rx block-size alignment HW quirk Luciano Coelho
2012-04-11 19:53 ` [PATCH 08/24] wlcore/wl12xx: add hw op for getting rx buffer data alignment Luciano Coelho
2012-04-11 19:53 ` [PATCH 09/24] wlcore/wl12xx: add prepare_read hw op for Rx data Luciano Coelho
2012-04-11 19:53 ` [PATCH 10/24] wlcore/wl12xx: add hw op for getting rx packet data length Luciano Coelho
2012-04-11 19:53 ` [PATCH 11/24] wlcore/wl12xx: split Tx completion to immediate/delayed Luciano Coelho
2012-04-11 19:53 ` [PATCH 12/24] wlcore/wl12xx: turn no-Tx-align quirk into Tx-align Luciano Coelho
2012-04-11 19:53 ` [PATCH 13/24] wlcore/wl12xx: add hw_init operation Luciano Coelho
2012-04-11 19:53 ` [PATCH 14/24] wlcore/wl12xx: add hw op for vif init Luciano Coelho
2012-04-11 19:53 ` [PATCH 15/24] wlcore/wl12xx: expand functionality of cmd_trigger HW op Luciano Coelho
2012-04-11 19:53 ` [PATCH 16/24] wlcore/wl12xx: move runtime configuration struct to the lower driver Luciano Coelho
2012-04-11 19:53 ` [PATCH 17/24] wlcore/wl12xx: move extended radio configuration parameters to wl12xx Luciano Coelho
2012-04-11 19:53 ` [PATCH 18/24] wlcore/wl12xx: use a single memory config and reset if using wl127x Luciano Coelho
2012-04-11 19:53 ` [PATCH 19/24] wlcore/wl12xx: add hw op to get rate-mask for AP-link in STA mode Luciano Coelho
2012-04-11 19:53 ` Luciano Coelho [this message]
2012-04-11 19:53 ` [PATCH 21/24] wlcore: set max_rx_agg_subframes in mac80211 according to HT conf Luciano Coelho
2012-04-11 19:53 ` [PATCH 22/24] wlcore/wl12xx: move identify firmware function to a lower driver op Luciano Coelho
2012-04-11 19:53 ` [PATCH 23/24] wlcore: add module param to prevent HW recovery Luciano Coelho
2012-04-11 19:53 ` [PATCH 24/24] wlcore/wl12xx: adapt FW status for multiple families Luciano Coelho
2012-04-12 12:43 ` [PATCH 00/24] wl12xx/wl1251/wlcore: reorganize drivers part 2 Luciano Coelho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1334174020-18957-21-git-send-email-coelho@ti.com \
    --to=coelho@ti.com \
    --cc=arik@wizery.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox