From: Johannes Berg <johannes@sipsolutions.net>
To: linux-wireless@vger.kernel.org
Cc: Johannes Berg <johannes.berg@intel.com>
Subject: [PATCH 08/29] iwlwifi: give HT format to mac80211/radiotap
Date: Wed, 6 Jun 2012 15:21:49 +0200 [thread overview]
Message-ID: <1338988930-11561-8-git-send-email-johannes@sipsolutions.net> (raw)
In-Reply-To: <1338988930-11561-1-git-send-email-johannes@sipsolutions.net>
From: Johannes Berg <johannes.berg@intel.com>
We know whether we received a frame in GF format
or not, add it to the radiotap information.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-agn-rx.c | 2 ++
drivers/net/wireless/iwlwifi/iwl-mac80211.c | 2 ++
2 files changed, 4 insertions(+)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c b/drivers/net/wireless/iwlwifi/iwl-agn-rx.c
index 403de96..5035d2d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rx.c
@@ -1012,6 +1012,8 @@ static int iwlagn_rx_reply_rx(struct iwl_priv *priv,
rx_status.flag |= RX_FLAG_40MHZ;
if (rate_n_flags & RATE_MCS_SGI_MSK)
rx_status.flag |= RX_FLAG_SHORT_GI;
+ if (rate_n_flags & RATE_MCS_GF_MSK)
+ rx_status.flag |= RX_FLAG_HT_GF;
iwlagn_pass_packet_to_mac80211(priv, header, len, ampdu_status,
rxb, &rx_status);
diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
index 19e5235..26a87c2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c
+++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
@@ -38,6 +38,7 @@
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
+#include <net/ieee80211_radiotap.h>
#include <net/mac80211.h>
#include <asm/div64.h>
@@ -154,6 +155,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv,
IEEE80211_HW_SCAN_WHILE_IDLE;
hw->offchannel_tx_hw_queue = IWL_AUX_QUEUE;
+ hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FMT;
/*
* Including the following line will crash some AP's. This
--
1.7.10
next prev parent reply other threads:[~2012-06-06 13:22 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-06 13:21 [PATCH 01/29] iwlwifi: Check BSS ctx active before call mac80211 Johannes Berg
2012-06-06 13:21 ` [PATCH 02/29] iwlwifi: handle race condition in ROC flow Johannes Berg
2012-06-06 13:21 ` [PATCH 03/29] iwlwifi: make a lot of functions static Johannes Berg
2012-06-06 13:21 ` [PATCH 04/29] iwlwifi: use mac80211 channel in connection init Johannes Berg
2012-06-06 13:21 ` [PATCH 05/29] iwlwifi: trust mac80211 channel setting Johannes Berg
2012-06-06 13:21 ` [PATCH 06/29] iwlwifi: use mac80211 channels for reset scan Johannes Berg
2012-06-06 13:21 ` [PATCH 07/29] iwlwifi: use mac80211 channel for radar check Johannes Berg
2012-06-06 13:21 ` Johannes Berg [this message]
2012-06-06 13:21 ` [PATCH 09/29] iwlwifi: clear STATUS_SCAN_HW when PAN_PARAMS fails Johannes Berg
2012-06-06 13:21 ` [PATCH 10/29] iwlwifi: move PCIe into subdirectory Johannes Berg
2012-06-06 13:21 ` [PATCH 11/29] iwlwifi: trust mac80211 HT40 setting Johannes Berg
2012-06-06 13:21 ` [PATCH 12/29] iwlwifi: move DVM code into subdirectory Johannes Berg
2012-06-06 13:21 ` [PATCH 13/29] iwlwifi: unify tx_chains_num setting Johannes Berg
2012-06-06 13:21 ` [PATCH 14/29] iwlwifi: move ht40 bitmap into config Johannes Berg
2012-06-06 13:21 ` [PATCH 15/29] iwlwifi: SCD_INT_MSK is obsolete - don't update it Johannes Berg
2012-06-06 13:21 ` [PATCH 16/29] iwlwifi: first config the SCD queues, then activate them Johannes Berg
2012-06-06 13:21 ` [PATCH 17/29] iwlwifi: use iwl_trans_set_wr_ptrs to init the queues Johannes Berg
2012-06-06 13:21 ` [PATCH 18/29] iwlwifi: s/txq_agg_disable/txq_disable Johannes Berg
2012-06-06 13:22 ` [PATCH 19/29] iwlwifi: s/txq_setup/txq_enable Johannes Berg
2012-06-06 13:22 ` [PATCH 20/29] iwlwifi: update mask value for SCD queue config Johannes Berg
2012-06-06 13:22 ` [PATCH 21/29] iwlwifi: allocate Tx cmd pool per device Johannes Berg
2012-06-06 13:22 ` [PATCH 22/29] iwlwifi: add iwl_set_bits_mask Johannes Berg
2012-06-06 13:22 ` [PATCH 23/29] iwlwifi: fix rf configuration Johannes Berg
2012-06-06 13:22 ` [PATCH 24/29] iwlwifi: configure the SKU in the HW Johannes Berg
2012-06-06 13:22 ` [PATCH 25/29] iwlwifi: refactor EEPROM reading/parsing Johannes Berg
2012-06-06 13:22 ` [PATCH 26/29] iwlwifi: fix typo 'IWL_WATCHHDOG_DISABLED' Johannes Berg
2012-06-06 13:22 ` [PATCH 27/29] iwlwifi: configure PHY version for 1000 series Johannes Berg
2012-06-06 13:22 ` [PATCH 28/29] iwlwifi: move RF config into NIC config Johannes Berg
2012-06-06 13:22 ` [PATCH 29/29] iwlwifi: remove extern opmode ops declarations Johannes Berg
2012-06-06 13:27 ` [PATCH 00/29] iwlwifi updates for 3.6 Johannes Berg
2012-06-06 13:28 ` Johannes Berg
2012-06-06 13:36 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338988930-11561-8-git-send-email-johannes@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=johannes.berg@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox