From: Sujith Manoharan <sujith@msujith.org>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH] ath9k_hw: Fix multicast search for AR9002 family
Date: Mon, 15 Jul 2013 11:03:57 +0530 [thread overview]
Message-ID: <1373866437-13655-1-git-send-email-sujith@msujith.org> (raw)
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
The multicast search bit is disabled for the AR9003
family, but this is required for AR9002 too. Fix this in
the INI override routine.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/ar5008_phy.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index d1acfe9..1576d58 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -610,7 +610,15 @@ static void ar5008_hw_override_ini(struct ath_hw *ah,
REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
if (AR_SREV_9280_20_OR_LATER(ah)) {
- val = REG_READ(ah, AR_PCU_MISC_MODE2);
+ /*
+ * For AR9280 and above, there is a new feature that allows
+ * Multicast search based on both MAC Address and Key ID.
+ * By default, this feature is enabled. But since the driver
+ * is not using this feature, we switch it off; otherwise
+ * multicast search based on MAC addr only will fail.
+ */
+ val = REG_READ(ah, AR_PCU_MISC_MODE2) &
+ (~AR_ADHOC_MCAST_KEYID_ENABLE);
if (!AR_SREV_9271(ah))
val &= ~AR_PCU_MISC_MODE2_HWWAR1;
--
1.8.3.2
reply other threads:[~2013-07-15 5:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373866437-13655-1-git-send-email-sujith@msujith.org \
--to=sujith@msujith.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox