[PATCH 1/4] ath9k: Fix wow.c compilation

[PATCH 1/4] ath9k: Fix wow.c compilation

[Sujith Manoharan]

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

The HW routines to set various WoW registers are present
in wow.c. For some reason, it has been compiled as part
of the main ath9k.ko module all this time, when it should
really be part of ath9k_hw.ko. This patch renames the file to
ar9003_wow.ko and adds it to ath9k_hw.ko.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/Makefile     |   3 +-
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 422 ++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/wow.c        | 422 ----------------------------
 3 files changed, 424 insertions(+), 423 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_wow.c
 delete mode 100644 drivers/net/wireless/ath/ath9k/wow.c

diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index f86a261..796686a 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -14,7 +14,6 @@ ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
 ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
 ath9k-$(CONFIG_ATH9K_DFS_DEBUGFS) += dfs_debug.o
 ath9k-$(CONFIG_ATH9K_DFS_CERTIFIED) += dfs.o
-ath9k-$(CONFIG_PM_SLEEP) += wow.o
 ath9k-$(CONFIG_ATH9K_TX99) += tx99.o
 
 obj-$(CONFIG_ATH9K) += ath9k.o
@@ -41,6 +40,8 @@ ath9k_hw-y:=	\
 		ar9003_eeprom.o \
 		ar9003_paprd.o
 
+ath9k_hw-$(CONFIG_PM_SLEEP) += ar9003_wow.o
+
 ath9k_hw-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \
 					   ar9003_mci.o
 obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_wow.c b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
new file mode 100644
index 0000000..81c88dd
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
@@ -0,0 +1,422 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/export.h>
+#include "ath9k.h"
+#include "reg.h"
+#include "hw-ops.h"
+
+const char *ath9k_hw_wow_event_to_string(u32 wow_event)
+{
+	if (wow_event & AH_WOW_MAGIC_PATTERN_EN)
+		return "Magic pattern";
+	if (wow_event & AH_WOW_USER_PATTERN_EN)
+		return "User pattern";
+	if (wow_event & AH_WOW_LINK_CHANGE)
+		return "Link change";
+	if (wow_event & AH_WOW_BEACON_MISS)
+		return "Beacon miss";
+
+	return  "unknown reason";
+}
+EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);
+
+static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+
+	/* set rx disable bit */
+	REG_WRITE(ah, AR_CR, AR_CR_RXD);
+
+	if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0, AH_WAIT_TIMEOUT)) {
+		ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
+			REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
+		return;
+	}
+
+	REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
+}
+
+static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	u8 sta_mac_addr[ETH_ALEN], ap_mac_addr[ETH_ALEN];
+	u32 ctl[13] = {0};
+	u32 data_word[KAL_NUM_DATA_WORDS];
+	u8 i;
+	u32 wow_ka_data_word0;
+
+	memcpy(sta_mac_addr, common->macaddr, ETH_ALEN);
+	memcpy(ap_mac_addr, common->curbssid, ETH_ALEN);
+
+	/* set the transmit buffer */
+	ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16));
+	ctl[1] = 0;
+	ctl[3] = 0xb;	/* OFDM_6M hardware value for this rate */
+	ctl[4] = 0;
+	ctl[7] = (ah->txchainmask) << 2;
+	ctl[2] = 0xf << 16; /* tx_tries 0 */
+
+	for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
+		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
+
+	REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
+
+	data_word[0] = (KAL_FRAME_TYPE << 2) | (KAL_FRAME_SUB_TYPE << 4) |
+		       (KAL_TO_DS << 8) | (KAL_DURATION_ID << 16);
+	data_word[1] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
+		       (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
+	data_word[2] = (sta_mac_addr[1] << 24) | (sta_mac_addr[0] << 16) |
+		       (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
+	data_word[3] = (sta_mac_addr[5] << 24) | (sta_mac_addr[4] << 16) |
+		       (sta_mac_addr[3] << 8) | (sta_mac_addr[2]);
+	data_word[4] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
+		       (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
+	data_word[5] = (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
+
+	if (AR_SREV_9462_20(ah)) {
+		/* AR9462 2.0 has an extra descriptor word (time based
+		 * discard) compared to other chips */
+		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0);
+		wow_ka_data_word0 = AR_WOW_TXBUF(13);
+	} else {
+		wow_ka_data_word0 = AR_WOW_TXBUF(12);
+	}
+
+	for (i = 0; i < KAL_NUM_DATA_WORDS; i++)
+		REG_WRITE(ah, (wow_ka_data_word0 + i*4), data_word[i]);
+
+}
+
+void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
+				u8 *user_mask, int pattern_count,
+				int pattern_len)
+{
+	int i;
+	u32 pattern_val, mask_val;
+	u32 set, clr;
+
+	/* FIXME: should check count by querying the hardware capability */
+	if (pattern_count >= MAX_NUM_PATTERN)
+		return;
+
+	REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
+
+	/* set the registers for pattern */
+	for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
+		memcpy(&pattern_val, user_pattern, 4);
+		REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
+			  pattern_val);
+		user_pattern += 4;
+	}
+
+	/* set the registers for mask */
+	for (i = 0; i < MAX_PATTERN_MASK_SIZE; i += 4) {
+		memcpy(&mask_val, user_mask, 4);
+		REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
+		user_mask += 4;
+	}
+
+	/* set the pattern length to be matched
+	 *
+	 * AR_WOW_LENGTH1_REG1
+	 * bit 31:24 pattern 0 length
+	 * bit 23:16 pattern 1 length
+	 * bit 15:8 pattern 2 length
+	 * bit 7:0 pattern 3 length
+	 *
+	 * AR_WOW_LENGTH1_REG2
+	 * bit 31:24 pattern 4 length
+	 * bit 23:16 pattern 5 length
+	 * bit 15:8 pattern 6 length
+	 * bit 7:0 pattern 7 length
+	 *
+	 * the below logic writes out the new
+	 * pattern length for the corresponding
+	 * pattern_count, while masking out the
+	 * other fields
+	 */
+
+	ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
+
+	if (pattern_count < 4) {
+		/* Pattern 0-3 uses AR_WOW_LENGTH1 register */
+		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+		       AR_WOW_LEN1_SHIFT(pattern_count);
+		clr = AR_WOW_LENGTH1_MASK(pattern_count);
+		REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
+	} else {
+		/* Pattern 4-7 uses AR_WOW_LENGTH2 register */
+		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+		       AR_WOW_LEN2_SHIFT(pattern_count);
+		clr = AR_WOW_LENGTH2_MASK(pattern_count);
+		REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
+	}
+
+}
+EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern);
+
+u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
+{
+	u32 wow_status = 0;
+	u32 val = 0, rval;
+
+	/*
+	 * read the WoW status register to know
+	 * the wakeup reason
+	 */
+	rval = REG_READ(ah, AR_WOW_PATTERN);
+	val = AR_WOW_STATUS(rval);
+
+	/*
+	 * mask only the WoW events that we have enabled. Sometimes
+	 * we have spurious WoW events from the AR_WOW_PATTERN
+	 * register. This mask will clean it up.
+	 */
+
+	val &= ah->wow_event_mask;
+
+	if (val) {
+		if (val & AR_WOW_MAGIC_PAT_FOUND)
+			wow_status |= AH_WOW_MAGIC_PATTERN_EN;
+		if (AR_WOW_PATTERN_FOUND(val))
+			wow_status |= AH_WOW_USER_PATTERN_EN;
+		if (val & AR_WOW_KEEP_ALIVE_FAIL)
+			wow_status |= AH_WOW_LINK_CHANGE;
+		if (val & AR_WOW_BEACON_FAIL)
+			wow_status |= AH_WOW_BEACON_MISS;
+	}
+
+	/*
+	 * set and clear WOW_PME_CLEAR registers for the chip to
+	 * generate next wow signal.
+	 * disable D3 before accessing other registers ?
+	 */
+
+	/* do we need to check the bit value 0x01000000 (7-10) ?? */
+	REG_RMW(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_WOW_PME_CLR,
+		AR_PMCTRL_PWR_STATE_D1D3);
+
+	/*
+	 * clear all events
+	 */
+	REG_WRITE(ah, AR_WOW_PATTERN,
+		  AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN)));
+
+	/*
+	 * restore the beacon threshold to init value
+	 */
+	REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
+
+	/*
+	 * Restore the way the PCI-E reset, Power-On-Reset, external
+	 * PCIE_POR_SHORT pins are tied to its original value.
+	 * Previously just before WoW sleep, we untie the PCI-E
+	 * reset to our Chip's Power On Reset so that any PCI-E
+	 * reset from the bus will not reset our chip
+	 */
+	if (ah->is_pciexpress)
+		ath9k_hw_configpcipowersave(ah, false);
+
+	ah->wow_event_mask = 0;
+
+	return wow_status;
+}
+EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
+
+void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
+{
+	u32 wow_event_mask;
+	u32 set, clr;
+
+	/*
+	 * wow_event_mask is a mask to the AR_WOW_PATTERN register to
+	 * indicate which WoW events we have enabled. The WoW events
+	 * are from the 'pattern_enable' in this function and
+	 * 'pattern_count' of ath9k_hw_wow_apply_pattern()
+	 */
+	wow_event_mask = ah->wow_event_mask;
+
+	/*
+	 * Untie Power-on-Reset from the PCI-E-Reset. When we are in
+	 * WOW sleep, we do want the Reset from the PCI-E to disturb
+	 * our hw state
+	 */
+	if (ah->is_pciexpress) {
+		/*
+		 * we need to untie the internal POR (power-on-reset)
+		 * to the external PCI-E reset. We also need to tie
+		 * the PCI-E Phy reset to the PCI-E reset.
+		 */
+		set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
+		clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
+		REG_RMW(ah, AR_WA, set, clr);
+	}
+
+	/*
+	 * set the power states appropriately and enable PME
+	 */
+	set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA |
+	      AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR;
+
+	/*
+	 * set and clear WOW_PME_CLEAR registers for the chip
+	 * to generate next wow signal.
+	 */
+	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
+	clr = AR_PMCTRL_WOW_PME_CLR;
+	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+
+	/*
+	 * Setup for:
+	 *	- beacon misses
+	 *	- magic pattern
+	 *	- keep alive timeout
+	 *	- pattern matching
+	 */
+
+	/*
+	 * Program default values for pattern backoff, aifs/slot/KAL count,
+	 * beacon miss timeout, KAL timeout, etc.
+	 */
+	set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
+	REG_SET_BIT(ah, AR_WOW_PATTERN, set);
+
+	set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
+	      AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
+	      AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
+	REG_SET_BIT(ah, AR_WOW_COUNT, set);
+
+	if (pattern_enable & AH_WOW_BEACON_MISS)
+		set = AR_WOW_BEACON_TIMO;
+	/* We are not using beacon miss, program a large value */
+	else
+		set = AR_WOW_BEACON_TIMO_MAX;
+
+	REG_WRITE(ah, AR_WOW_BCN_TIMO, set);
+
+	/*
+	 * Keep alive timo in ms except AR9280
+	 */
+	if (!pattern_enable)
+		set = AR_WOW_KEEP_ALIVE_NEVER;
+	else
+		set = KAL_TIMEOUT * 32;
+
+	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);
+
+	/*
+	 * Keep alive delay in us. based on 'power on clock',
+	 * therefore in usec
+	 */
+	set = KAL_DELAY * 1000;
+	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);
+
+	/*
+	 * Create keep alive pattern to respond to beacons
+	 */
+	ath9k_wow_create_keep_alive_pattern(ah);
+
+	/*
+	 * Configure MAC WoW Registers
+	 */
+	set = 0;
+	/* Send keep alive timeouts anyway */
+	clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;
+
+	if (pattern_enable & AH_WOW_LINK_CHANGE)
+		wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL;
+	else
+		set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+
+	set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+	REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);
+
+	/*
+	 * we are relying on a bmiss failure. ensure we have
+	 * enough threshold to prevent false positives
+	 */
+	REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
+		      AR_WOW_BMISSTHRESHOLD);
+
+	set = 0;
+	clr = 0;
+
+	if (pattern_enable & AH_WOW_BEACON_MISS) {
+		set = AR_WOW_BEACON_FAIL_EN;
+		wow_event_mask |= AR_WOW_BEACON_FAIL;
+	} else {
+		clr = AR_WOW_BEACON_FAIL_EN;
+	}
+
+	REG_RMW(ah, AR_WOW_BCN_EN, set, clr);
+
+	set = 0;
+	clr = 0;
+	/*
+	 * Enable the magic packet registers
+	 */
+	if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
+		set = AR_WOW_MAGIC_EN;
+		wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND;
+	} else {
+		clr = AR_WOW_MAGIC_EN;
+	}
+	set |= AR_WOW_MAC_INTR_EN;
+	REG_RMW(ah, AR_WOW_PATTERN, set, clr);
+
+	REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
+		  AR_WOW_PATTERN_SUPPORTED);
+
+	/*
+	 * Set the power states appropriately and enable PME
+	 */
+	clr = 0;
+	set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
+	      AR_PMCTRL_PWR_PM_CTRL_ENA;
+
+	clr = AR_PCIE_PM_CTRL_ENA;
+	REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
+
+	/*
+	 * this is needed to prevent the chip waking up
+	 * the host within 3-4 seconds with certain
+	 * platform/BIOS. The fix is to enable
+	 * D1 & D3 to match original definition and
+	 * also match the OTP value. Anyway this
+	 * is more related to SW WOW.
+	 */
+	clr = AR_PMCTRL_PWR_STATE_D1D3;
+	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+
+	set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
+	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
+
+	REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
+
+	/* to bring down WOW power low margin */
+	set = BIT(13);
+	REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
+	/* HW WoW */
+	clr = BIT(5);
+	REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
+
+	ath9k_hw_set_powermode_wow_sleep(ah);
+	ah->wow_event_mask = wow_event_mask;
+}
+EXPORT_SYMBOL(ath9k_hw_wow_enable);
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
deleted file mode 100644
index 81c88dd..0000000
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/*
- * Copyright (c) 2012 Qualcomm Atheros, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/export.h>
-#include "ath9k.h"
-#include "reg.h"
-#include "hw-ops.h"
-
-const char *ath9k_hw_wow_event_to_string(u32 wow_event)
-{
-	if (wow_event & AH_WOW_MAGIC_PATTERN_EN)
-		return "Magic pattern";
-	if (wow_event & AH_WOW_USER_PATTERN_EN)
-		return "User pattern";
-	if (wow_event & AH_WOW_LINK_CHANGE)
-		return "Link change";
-	if (wow_event & AH_WOW_BEACON_MISS)
-		return "Beacon miss";
-
-	return  "unknown reason";
-}
-EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);
-
-static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
-{
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
-
-	/* set rx disable bit */
-	REG_WRITE(ah, AR_CR, AR_CR_RXD);
-
-	if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0, AH_WAIT_TIMEOUT)) {
-		ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
-			REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
-		return;
-	}
-
-	REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
-}
-
-static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
-{
-	struct ath_common *common = ath9k_hw_common(ah);
-	u8 sta_mac_addr[ETH_ALEN], ap_mac_addr[ETH_ALEN];
-	u32 ctl[13] = {0};
-	u32 data_word[KAL_NUM_DATA_WORDS];
-	u8 i;
-	u32 wow_ka_data_word0;
-
-	memcpy(sta_mac_addr, common->macaddr, ETH_ALEN);
-	memcpy(ap_mac_addr, common->curbssid, ETH_ALEN);
-
-	/* set the transmit buffer */
-	ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16));
-	ctl[1] = 0;
-	ctl[3] = 0xb;	/* OFDM_6M hardware value for this rate */
-	ctl[4] = 0;
-	ctl[7] = (ah->txchainmask) << 2;
-	ctl[2] = 0xf << 16; /* tx_tries 0 */
-
-	for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
-		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
-
-	REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
-
-	data_word[0] = (KAL_FRAME_TYPE << 2) | (KAL_FRAME_SUB_TYPE << 4) |
-		       (KAL_TO_DS << 8) | (KAL_DURATION_ID << 16);
-	data_word[1] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
-		       (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
-	data_word[2] = (sta_mac_addr[1] << 24) | (sta_mac_addr[0] << 16) |
-		       (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
-	data_word[3] = (sta_mac_addr[5] << 24) | (sta_mac_addr[4] << 16) |
-		       (sta_mac_addr[3] << 8) | (sta_mac_addr[2]);
-	data_word[4] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
-		       (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
-	data_word[5] = (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
-
-	if (AR_SREV_9462_20(ah)) {
-		/* AR9462 2.0 has an extra descriptor word (time based
-		 * discard) compared to other chips */
-		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0);
-		wow_ka_data_word0 = AR_WOW_TXBUF(13);
-	} else {
-		wow_ka_data_word0 = AR_WOW_TXBUF(12);
-	}
-
-	for (i = 0; i < KAL_NUM_DATA_WORDS; i++)
-		REG_WRITE(ah, (wow_ka_data_word0 + i*4), data_word[i]);
-
-}
-
-void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
-				u8 *user_mask, int pattern_count,
-				int pattern_len)
-{
-	int i;
-	u32 pattern_val, mask_val;
-	u32 set, clr;
-
-	/* FIXME: should check count by querying the hardware capability */
-	if (pattern_count >= MAX_NUM_PATTERN)
-		return;
-
-	REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
-
-	/* set the registers for pattern */
-	for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
-		memcpy(&pattern_val, user_pattern, 4);
-		REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
-			  pattern_val);
-		user_pattern += 4;
-	}
-
-	/* set the registers for mask */
-	for (i = 0; i < MAX_PATTERN_MASK_SIZE; i += 4) {
-		memcpy(&mask_val, user_mask, 4);
-		REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
-		user_mask += 4;
-	}
-
-	/* set the pattern length to be matched
-	 *
-	 * AR_WOW_LENGTH1_REG1
-	 * bit 31:24 pattern 0 length
-	 * bit 23:16 pattern 1 length
-	 * bit 15:8 pattern 2 length
-	 * bit 7:0 pattern 3 length
-	 *
-	 * AR_WOW_LENGTH1_REG2
-	 * bit 31:24 pattern 4 length
-	 * bit 23:16 pattern 5 length
-	 * bit 15:8 pattern 6 length
-	 * bit 7:0 pattern 7 length
-	 *
-	 * the below logic writes out the new
-	 * pattern length for the corresponding
-	 * pattern_count, while masking out the
-	 * other fields
-	 */
-
-	ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
-
-	if (pattern_count < 4) {
-		/* Pattern 0-3 uses AR_WOW_LENGTH1 register */
-		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
-		       AR_WOW_LEN1_SHIFT(pattern_count);
-		clr = AR_WOW_LENGTH1_MASK(pattern_count);
-		REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
-	} else {
-		/* Pattern 4-7 uses AR_WOW_LENGTH2 register */
-		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
-		       AR_WOW_LEN2_SHIFT(pattern_count);
-		clr = AR_WOW_LENGTH2_MASK(pattern_count);
-		REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
-	}
-
-}
-EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern);
-
-u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
-{
-	u32 wow_status = 0;
-	u32 val = 0, rval;
-
-	/*
-	 * read the WoW status register to know
-	 * the wakeup reason
-	 */
-	rval = REG_READ(ah, AR_WOW_PATTERN);
-	val = AR_WOW_STATUS(rval);
-
-	/*
-	 * mask only the WoW events that we have enabled. Sometimes
-	 * we have spurious WoW events from the AR_WOW_PATTERN
-	 * register. This mask will clean it up.
-	 */
-
-	val &= ah->wow_event_mask;
-
-	if (val) {
-		if (val & AR_WOW_MAGIC_PAT_FOUND)
-			wow_status |= AH_WOW_MAGIC_PATTERN_EN;
-		if (AR_WOW_PATTERN_FOUND(val))
-			wow_status |= AH_WOW_USER_PATTERN_EN;
-		if (val & AR_WOW_KEEP_ALIVE_FAIL)
-			wow_status |= AH_WOW_LINK_CHANGE;
-		if (val & AR_WOW_BEACON_FAIL)
-			wow_status |= AH_WOW_BEACON_MISS;
-	}
-
-	/*
-	 * set and clear WOW_PME_CLEAR registers for the chip to
-	 * generate next wow signal.
-	 * disable D3 before accessing other registers ?
-	 */
-
-	/* do we need to check the bit value 0x01000000 (7-10) ?? */
-	REG_RMW(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_WOW_PME_CLR,
-		AR_PMCTRL_PWR_STATE_D1D3);
-
-	/*
-	 * clear all events
-	 */
-	REG_WRITE(ah, AR_WOW_PATTERN,
-		  AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN)));
-
-	/*
-	 * restore the beacon threshold to init value
-	 */
-	REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
-
-	/*
-	 * Restore the way the PCI-E reset, Power-On-Reset, external
-	 * PCIE_POR_SHORT pins are tied to its original value.
-	 * Previously just before WoW sleep, we untie the PCI-E
-	 * reset to our Chip's Power On Reset so that any PCI-E
-	 * reset from the bus will not reset our chip
-	 */
-	if (ah->is_pciexpress)
-		ath9k_hw_configpcipowersave(ah, false);
-
-	ah->wow_event_mask = 0;
-
-	return wow_status;
-}
-EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
-
-void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
-{
-	u32 wow_event_mask;
-	u32 set, clr;
-
-	/*
-	 * wow_event_mask is a mask to the AR_WOW_PATTERN register to
-	 * indicate which WoW events we have enabled. The WoW events
-	 * are from the 'pattern_enable' in this function and
-	 * 'pattern_count' of ath9k_hw_wow_apply_pattern()
-	 */
-	wow_event_mask = ah->wow_event_mask;
-
-	/*
-	 * Untie Power-on-Reset from the PCI-E-Reset. When we are in
-	 * WOW sleep, we do want the Reset from the PCI-E to disturb
-	 * our hw state
-	 */
-	if (ah->is_pciexpress) {
-		/*
-		 * we need to untie the internal POR (power-on-reset)
-		 * to the external PCI-E reset. We also need to tie
-		 * the PCI-E Phy reset to the PCI-E reset.
-		 */
-		set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
-		clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
-		REG_RMW(ah, AR_WA, set, clr);
-	}
-
-	/*
-	 * set the power states appropriately and enable PME
-	 */
-	set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA |
-	      AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR;
-
-	/*
-	 * set and clear WOW_PME_CLEAR registers for the chip
-	 * to generate next wow signal.
-	 */
-	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
-	clr = AR_PMCTRL_WOW_PME_CLR;
-	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
-
-	/*
-	 * Setup for:
-	 *	- beacon misses
-	 *	- magic pattern
-	 *	- keep alive timeout
-	 *	- pattern matching
-	 */
-
-	/*
-	 * Program default values for pattern backoff, aifs/slot/KAL count,
-	 * beacon miss timeout, KAL timeout, etc.
-	 */
-	set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
-	REG_SET_BIT(ah, AR_WOW_PATTERN, set);
-
-	set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
-	      AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
-	      AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
-	REG_SET_BIT(ah, AR_WOW_COUNT, set);
-
-	if (pattern_enable & AH_WOW_BEACON_MISS)
-		set = AR_WOW_BEACON_TIMO;
-	/* We are not using beacon miss, program a large value */
-	else
-		set = AR_WOW_BEACON_TIMO_MAX;
-
-	REG_WRITE(ah, AR_WOW_BCN_TIMO, set);
-
-	/*
-	 * Keep alive timo in ms except AR9280
-	 */
-	if (!pattern_enable)
-		set = AR_WOW_KEEP_ALIVE_NEVER;
-	else
-		set = KAL_TIMEOUT * 32;
-
-	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);
-
-	/*
-	 * Keep alive delay in us. based on 'power on clock',
-	 * therefore in usec
-	 */
-	set = KAL_DELAY * 1000;
-	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);
-
-	/*
-	 * Create keep alive pattern to respond to beacons
-	 */
-	ath9k_wow_create_keep_alive_pattern(ah);
-
-	/*
-	 * Configure MAC WoW Registers
-	 */
-	set = 0;
-	/* Send keep alive timeouts anyway */
-	clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;
-
-	if (pattern_enable & AH_WOW_LINK_CHANGE)
-		wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL;
-	else
-		set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
-
-	set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
-	REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);
-
-	/*
-	 * we are relying on a bmiss failure. ensure we have
-	 * enough threshold to prevent false positives
-	 */
-	REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
-		      AR_WOW_BMISSTHRESHOLD);
-
-	set = 0;
-	clr = 0;
-
-	if (pattern_enable & AH_WOW_BEACON_MISS) {
-		set = AR_WOW_BEACON_FAIL_EN;
-		wow_event_mask |= AR_WOW_BEACON_FAIL;
-	} else {
-		clr = AR_WOW_BEACON_FAIL_EN;
-	}
-
-	REG_RMW(ah, AR_WOW_BCN_EN, set, clr);
-
-	set = 0;
-	clr = 0;
-	/*
-	 * Enable the magic packet registers
-	 */
-	if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
-		set = AR_WOW_MAGIC_EN;
-		wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND;
-	} else {
-		clr = AR_WOW_MAGIC_EN;
-	}
-	set |= AR_WOW_MAC_INTR_EN;
-	REG_RMW(ah, AR_WOW_PATTERN, set, clr);
-
-	REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
-		  AR_WOW_PATTERN_SUPPORTED);
-
-	/*
-	 * Set the power states appropriately and enable PME
-	 */
-	clr = 0;
-	set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
-	      AR_PMCTRL_PWR_PM_CTRL_ENA;
-
-	clr = AR_PCIE_PM_CTRL_ENA;
-	REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
-
-	/*
-	 * this is needed to prevent the chip waking up
-	 * the host within 3-4 seconds with certain
-	 * platform/BIOS. The fix is to enable
-	 * D1 & D3 to match original definition and
-	 * also match the OTP value. Anyway this
-	 * is more related to SW WOW.
-	 */
-	clr = AR_PMCTRL_PWR_STATE_D1D3;
-	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
-
-	set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
-	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
-
-	REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
-
-	/* to bring down WOW power low margin */
-	set = BIT(13);
-	REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
-	/* HW WoW */
-	clr = BIT(5);
-	REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
-
-	ath9k_hw_set_powermode_wow_sleep(ah);
-	ah->wow_event_mask = wow_event_mask;
-}
-EXPORT_SYMBOL(ath9k_hw_wow_enable);
-- 
1.8.4.1

[PATCH 2/4] ath9k: Add a config option for WoW

[Sujith Manoharan]

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/Kconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 3ffa4ea..30d273c 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -104,6 +104,14 @@ config ATH9K_TX99
 	  be evaluated to meet the RF exposure limits set forth in the
 	  governmental SAR regulations.
 
+config ATH9K_WOW
+	bool "Wake on Wireless LAN support (EXPERIMENTAL)"
+	depends on ATH9K && PM
+	default n
+	---help---
+	  This option enables Wake on Wireless LAN support for certain cards.
+	  Currently, AR9462 is supported.
+
 config ATH9K_LEGACY_RATE_CONTROL
 	bool "Atheros ath9k rate control"
 	depends on ATH9K
-- 
1.8.4.1

[PATCH 3/4] ath9k: Use CONFIG_ATH9K_WOW

[Sujith Manoharan]

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

Move the WoW code to wow.c and compile it conditionally
based on CONFIG_ATH9K_WOW.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/Makefile |   3 +-
 drivers/net/wireless/ath/ath9k/ath9k.h  |  28 ++-
 drivers/net/wireless/ath/ath9k/hw.h     |   4 +-
 drivers/net/wireless/ath/ath9k/init.c   |   4 +-
 drivers/net/wireless/ath/ath9k/main.c   | 338 +------------------------------
 drivers/net/wireless/ath/ath9k/wow.c    | 341 ++++++++++++++++++++++++++++++++
 6 files changed, 381 insertions(+), 337 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/wow.c

diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 796686a..337c459 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -15,6 +15,7 @@ ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
 ath9k-$(CONFIG_ATH9K_DFS_DEBUGFS) += dfs_debug.o
 ath9k-$(CONFIG_ATH9K_DFS_CERTIFIED) += dfs.o
 ath9k-$(CONFIG_ATH9K_TX99) += tx99.o
+ath9k-$(CONFIG_ATH9K_WOW) += wow.o
 
 obj-$(CONFIG_ATH9K) += ath9k.o
 
@@ -40,7 +41,7 @@ ath9k_hw-y:=	\
 		ar9003_eeprom.o \
 		ar9003_paprd.o
 
-ath9k_hw-$(CONFIG_PM_SLEEP) += ar9003_wow.o
+ath9k_hw-$(CONFIG_ATH9K_WOW) += ar9003_wow.o
 
 ath9k_hw-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \
 					   ar9003_mci.o
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 62f5892..9e1b728 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -570,6 +570,30 @@ static inline void ath_fill_led_pin(struct ath_softc *sc)
 }
 #endif
 
+/************************/
+/* Wake on Wireless LAN */
+/************************/
+
+#ifdef CONFIG_ATH9K_WOW
+int ath9k_suspend(struct ieee80211_hw *hw,
+		  struct cfg80211_wowlan *wowlan);
+int ath9k_resume(struct ieee80211_hw *hw);
+void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled);
+#else
+static inline int ath9k_suspend(struct ieee80211_hw *hw,
+				struct cfg80211_wowlan *wowlan)
+{
+	return 0;
+}
+static inline int ath9k_resume(struct ieee80211_hw *hw)
+{
+	return 0;
+}
+static inline void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
+{
+}
+#endif /* CONFIG_ATH9K_WOW */
+
 /*******************************/
 /* Antenna diversity/combining */
 /*******************************/
@@ -784,7 +808,7 @@ struct ath_softc {
 	bool tx99_state;
 	s16 tx99_power;
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_ATH9K_WOW
 	atomic_t wow_got_bmiss_intr;
 	atomic_t wow_sleep_proc_intr; /* in the middle of WoW sleep ? */
 	u32 wow_intr_before_sleep;
@@ -983,6 +1007,8 @@ extern bool is_ath9k_unloaded;
 u8 ath9k_parse_mpdudensity(u8 mpdudensity);
 irqreturn_t ath_isr(int irq, void *dev);
 int ath_reset(struct ath_softc *sc);
+void ath_cancel_work(struct ath_softc *sc);
+void ath_restart_work(struct ath_softc *sc);
 int ath9k_init_device(u16 devid, struct ath_softc *sc,
 		    const struct ath_bus_ops *bus_ops);
 void ath9k_deinit_device(struct ath_softc *sc);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 9ea24f1..69542c1 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -920,7 +920,7 @@ struct ath_hw {
 	/* Enterprise mode cap */
 	u32 ent_mode;
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_ATH9K_WOW
 	u32 wow_event_mask;
 #endif
 	bool is_clk_25mhz;
@@ -1126,7 +1126,7 @@ ath9k_hw_get_btcoex_scheme(struct ath_hw *ah)
 #endif /* CONFIG_ATH9K_BTCOEX_SUPPORT */
 
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_ATH9K_WOW
 const char *ath9k_hw_wow_event_to_string(u32 wow_event);
 void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
 				u8 *user_mask, int pattern_count,
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 17502b4..ee7da65 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -870,7 +870,7 @@ static const struct ieee80211_iface_combination if_comb[] = {
 	}
 };
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_ATH9K_WOW
 static const struct wiphy_wowlan_support ath9k_wowlan_support = {
 	.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
 	.n_patterns = MAX_NUM_USER_PATTERN,
@@ -928,7 +928,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
 	hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_ATH9K_WOW
 	if ((ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) &&
 	    (sc->driver_data & ATH9K_PCI_WOW) &&
 	    device_can_wakeup(sc->dev))
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 3d17398..e54ffdd 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -163,13 +163,13 @@ static void __ath_cancel_work(struct ath_softc *sc)
 #endif
 }
 
-static void ath_cancel_work(struct ath_softc *sc)
+void ath_cancel_work(struct ath_softc *sc)
 {
 	__ath_cancel_work(sc);
 	cancel_work_sync(&sc->hw_reset_work);
 }
 
-static void ath_restart_work(struct ath_softc *sc)
+void ath_restart_work(struct ath_softc *sc)
 {
 	ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
 
@@ -579,7 +579,8 @@ irqreturn_t ath_isr(int irq, void *dev)
 
 		goto chip_reset;
 	}
-#ifdef CONFIG_PM_SLEEP
+
+#ifdef CONFIG_ATH9K_WOW
 	if (status & ATH9K_INT_BMISS) {
 		if (atomic_read(&sc->wow_sleep_proc_intr) == 0) {
 			ath_dbg(common, ANY, "during WoW we got a BMISS\n");
@@ -588,6 +589,8 @@ irqreturn_t ath_isr(int irq, void *dev)
 		}
 	}
 #endif
+
+
 	if (status & ATH9K_INT_SWBA)
 		tasklet_schedule(&sc->bcon_tasklet);
 
@@ -2021,333 +2024,6 @@ static int ath9k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-
-static void ath9k_wow_map_triggers(struct ath_softc *sc,
-				   struct cfg80211_wowlan *wowlan,
-				   u32 *wow_triggers)
-{
-	if (wowlan->disconnect)
-		*wow_triggers |= AH_WOW_LINK_CHANGE |
-				 AH_WOW_BEACON_MISS;
-	if (wowlan->magic_pkt)
-		*wow_triggers |= AH_WOW_MAGIC_PATTERN_EN;
-
-	if (wowlan->n_patterns)
-		*wow_triggers |= AH_WOW_USER_PATTERN_EN;
-
-	sc->wow_enabled = *wow_triggers;
-
-}
-
-static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	int pattern_count = 0;
-	int i, byte_cnt;
-	u8 dis_deauth_pattern[MAX_PATTERN_SIZE];
-	u8 dis_deauth_mask[MAX_PATTERN_SIZE];
-
-	memset(dis_deauth_pattern, 0, MAX_PATTERN_SIZE);
-	memset(dis_deauth_mask, 0, MAX_PATTERN_SIZE);
-
-	/*
-	 * Create Dissassociate / Deauthenticate packet filter
-	 *
-	 *     2 bytes        2 byte    6 bytes   6 bytes  6 bytes
-	 *  +--------------+----------+---------+--------+--------+----
-	 *  + Frame Control+ Duration +   DA    +  SA    +  BSSID +
-	 *  +--------------+----------+---------+--------+--------+----
-	 *
-	 * The above is the management frame format for disassociate/
-	 * deauthenticate pattern, from this we need to match the first byte
-	 * of 'Frame Control' and DA, SA, and BSSID fields
-	 * (skipping 2nd byte of FC and Duration feild.
-	 *
-	 * Disassociate pattern
-	 * --------------------
-	 * Frame control = 00 00 1010
-	 * DA, SA, BSSID = x:x:x:x:x:x
-	 * Pattern will be A0000000 | x:x:x:x:x:x | x:x:x:x:x:x
-	 *			    | x:x:x:x:x:x  -- 22 bytes
-	 *
-	 * Deauthenticate pattern
-	 * ----------------------
-	 * Frame control = 00 00 1100
-	 * DA, SA, BSSID = x:x:x:x:x:x
-	 * Pattern will be C0000000 | x:x:x:x:x:x | x:x:x:x:x:x
-	 *			    | x:x:x:x:x:x  -- 22 bytes
-	 */
-
-	/* Create Disassociate Pattern first */
-
-	byte_cnt = 0;
-
-	/* Fill out the mask with all FF's */
-
-	for (i = 0; i < MAX_PATTERN_MASK_SIZE; i++)
-		dis_deauth_mask[i] = 0xff;
-
-	/* copy the first byte of frame control field */
-	dis_deauth_pattern[byte_cnt] = 0xa0;
-	byte_cnt++;
-
-	/* skip 2nd byte of frame control and Duration field */
-	byte_cnt += 3;
-
-	/*
-	 * need not match the destination mac address, it can be a broadcast
-	 * mac address or an unicast to this station
-	 */
-	byte_cnt += 6;
-
-	/* copy the source mac address */
-	memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
-
-	byte_cnt += 6;
-
-	/* copy the bssid, its same as the source mac address */
-
-	memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
-
-	/* Create Disassociate pattern mask */
-
-	dis_deauth_mask[0] = 0xfe;
-	dis_deauth_mask[1] = 0x03;
-	dis_deauth_mask[2] = 0xc0;
-
-	ath_dbg(common, WOW, "Adding disassoc/deauth patterns for WoW\n");
-
-	ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
-				   pattern_count, byte_cnt);
-
-	pattern_count++;
-	/*
-	 * for de-authenticate pattern, only the first byte of the frame
-	 * control field gets changed from 0xA0 to 0xC0
-	 */
-	dis_deauth_pattern[0] = 0xC0;
-
-	ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
-				   pattern_count, byte_cnt);
-
-}
-
-static void ath9k_wow_add_pattern(struct ath_softc *sc,
-				  struct cfg80211_wowlan *wowlan)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath9k_wow_pattern *wow_pattern = NULL;
-	struct cfg80211_pkt_pattern *patterns = wowlan->patterns;
-	int mask_len;
-	s8 i = 0;
-
-	if (!wowlan->n_patterns)
-		return;
-
-	/*
-	 * Add the new user configured patterns
-	 */
-	for (i = 0; i < wowlan->n_patterns; i++) {
-
-		wow_pattern = kzalloc(sizeof(*wow_pattern), GFP_KERNEL);
-
-		if (!wow_pattern)
-			return;
-
-		/*
-		 * TODO: convert the generic user space pattern to
-		 * appropriate chip specific/802.11 pattern.
-		 */
-
-		mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
-		memset(wow_pattern->pattern_bytes, 0, MAX_PATTERN_SIZE);
-		memset(wow_pattern->mask_bytes, 0, MAX_PATTERN_SIZE);
-		memcpy(wow_pattern->pattern_bytes, patterns[i].pattern,
-		       patterns[i].pattern_len);
-		memcpy(wow_pattern->mask_bytes, patterns[i].mask, mask_len);
-		wow_pattern->pattern_len = patterns[i].pattern_len;
-
-		/*
-		 * just need to take care of deauth and disssoc pattern,
-		 * make sure we don't overwrite them.
-		 */
-
-		ath9k_hw_wow_apply_pattern(ah, wow_pattern->pattern_bytes,
-					   wow_pattern->mask_bytes,
-					   i + 2,
-					   wow_pattern->pattern_len);
-		kfree(wow_pattern);
-
-	}
-
-}
-
-static int ath9k_suspend(struct ieee80211_hw *hw,
-			 struct cfg80211_wowlan *wowlan)
-{
-	struct ath_softc *sc = hw->priv;
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	u32 wow_triggers_enabled = 0;
-	int ret = 0;
-
-	mutex_lock(&sc->mutex);
-
-	ath_cancel_work(sc);
-	ath_stop_ani(sc);
-	del_timer_sync(&sc->rx_poll_timer);
-
-	if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
-		ath_dbg(common, ANY, "Device not present\n");
-		ret = -EINVAL;
-		goto fail_wow;
-	}
-
-	if (WARN_ON(!wowlan)) {
-		ath_dbg(common, WOW, "None of the WoW triggers enabled\n");
-		ret = -EINVAL;
-		goto fail_wow;
-	}
-
-	if (!device_can_wakeup(sc->dev)) {
-		ath_dbg(common, WOW, "device_can_wakeup failed, WoW is not enabled\n");
-		ret = 1;
-		goto fail_wow;
-	}
-
-	/*
-	 * none of the sta vifs are associated
-	 * and we are not currently handling multivif
-	 * cases, for instance we have to seperately
-	 * configure 'keep alive frame' for each
-	 * STA.
-	 */
-
-	if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
-		ath_dbg(common, WOW, "None of the STA vifs are associated\n");
-		ret = 1;
-		goto fail_wow;
-	}
-
-	if (sc->nvifs > 1) {
-		ath_dbg(common, WOW, "WoW for multivif is not yet supported\n");
-		ret = 1;
-		goto fail_wow;
-	}
-
-	ath9k_wow_map_triggers(sc, wowlan, &wow_triggers_enabled);
-
-	ath_dbg(common, WOW, "WoW triggers enabled 0x%x\n",
-		wow_triggers_enabled);
-
-	ath9k_ps_wakeup(sc);
-
-	ath9k_stop_btcoex(sc);
-
-	/*
-	 * Enable wake up on recieving disassoc/deauth
-	 * frame by default.
-	 */
-	ath9k_wow_add_disassoc_deauth_pattern(sc);
-
-	if (wow_triggers_enabled & AH_WOW_USER_PATTERN_EN)
-		ath9k_wow_add_pattern(sc, wowlan);
-
-	spin_lock_bh(&sc->sc_pcu_lock);
-	/*
-	 * To avoid false wake, we enable beacon miss interrupt only
-	 * when we go to sleep. We save the current interrupt mask
-	 * so we can restore it after the system wakes up
-	 */
-	sc->wow_intr_before_sleep = ah->imask;
-	ah->imask &= ~ATH9K_INT_GLOBAL;
-	ath9k_hw_disable_interrupts(ah);
-	ah->imask = ATH9K_INT_BMISS | ATH9K_INT_GLOBAL;
-	ath9k_hw_set_interrupts(ah);
-	ath9k_hw_enable_interrupts(ah);
-
-	spin_unlock_bh(&sc->sc_pcu_lock);
-
-	/*
-	 * we can now sync irq and kill any running tasklets, since we already
-	 * disabled interrupts and not holding a spin lock
-	 */
-	synchronize_irq(sc->irq);
-	tasklet_kill(&sc->intr_tq);
-
-	ath9k_hw_wow_enable(ah, wow_triggers_enabled);
-
-	ath9k_ps_restore(sc);
-	ath_dbg(common, ANY, "WoW enabled in ath9k\n");
-	atomic_inc(&sc->wow_sleep_proc_intr);
-
-fail_wow:
-	mutex_unlock(&sc->mutex);
-	return ret;
-}
-
-static int ath9k_resume(struct ieee80211_hw *hw)
-{
-	struct ath_softc *sc = hw->priv;
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	u32 wow_status;
-
-	mutex_lock(&sc->mutex);
-
-	ath9k_ps_wakeup(sc);
-
-	spin_lock_bh(&sc->sc_pcu_lock);
-
-	ath9k_hw_disable_interrupts(ah);
-	ah->imask = sc->wow_intr_before_sleep;
-	ath9k_hw_set_interrupts(ah);
-	ath9k_hw_enable_interrupts(ah);
-
-	spin_unlock_bh(&sc->sc_pcu_lock);
-
-	wow_status = ath9k_hw_wow_wakeup(ah);
-
-	if (atomic_read(&sc->wow_got_bmiss_intr) == 0) {
-		/*
-		 * some devices may not pick beacon miss
-		 * as the reason they woke up so we add
-		 * that here for that shortcoming.
-		 */
-		wow_status |= AH_WOW_BEACON_MISS;
-		atomic_dec(&sc->wow_got_bmiss_intr);
-		ath_dbg(common, ANY, "Beacon miss interrupt picked up during WoW sleep\n");
-	}
-
-	atomic_dec(&sc->wow_sleep_proc_intr);
-
-	if (wow_status) {
-		ath_dbg(common, ANY, "Waking up due to WoW triggers %s with WoW status = %x\n",
-			ath9k_hw_wow_event_to_string(wow_status), wow_status);
-	}
-
-	ath_restart_work(sc);
-	ath9k_start_btcoex(sc);
-
-	ath9k_ps_restore(sc);
-	mutex_unlock(&sc->mutex);
-
-	return 0;
-}
-
-static void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
-{
-	struct ath_softc *sc = hw->priv;
-
-	mutex_lock(&sc->mutex);
-	device_init_wakeup(sc->dev, 1);
-	device_set_wakeup_enable(sc->dev, enabled);
-	mutex_unlock(&sc->mutex);
-}
-
-#endif
 static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
 {
 	struct ath_softc *sc = hw->priv;
@@ -2403,7 +2079,7 @@ struct ieee80211_ops ath9k_ops = {
 	.set_antenna	    = ath9k_set_antenna,
 	.get_antenna	    = ath9k_get_antenna,
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_ATH9K_WOW
 	.suspend	    = ath9k_suspend,
 	.resume		    = ath9k_resume,
 	.set_wakeup	    = ath9k_set_wakeup,
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
new file mode 100644
index 0000000..e161bbc
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -0,0 +1,341 @@
+/*
+ * Copyright (c) 2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath9k.h"
+
+static void ath9k_wow_map_triggers(struct ath_softc *sc,
+				   struct cfg80211_wowlan *wowlan,
+				   u32 *wow_triggers)
+{
+	if (wowlan->disconnect)
+		*wow_triggers |= AH_WOW_LINK_CHANGE |
+				 AH_WOW_BEACON_MISS;
+	if (wowlan->magic_pkt)
+		*wow_triggers |= AH_WOW_MAGIC_PATTERN_EN;
+
+	if (wowlan->n_patterns)
+		*wow_triggers |= AH_WOW_USER_PATTERN_EN;
+
+	sc->wow_enabled = *wow_triggers;
+
+}
+
+static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
+{
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	int pattern_count = 0;
+	int i, byte_cnt;
+	u8 dis_deauth_pattern[MAX_PATTERN_SIZE];
+	u8 dis_deauth_mask[MAX_PATTERN_SIZE];
+
+	memset(dis_deauth_pattern, 0, MAX_PATTERN_SIZE);
+	memset(dis_deauth_mask, 0, MAX_PATTERN_SIZE);
+
+	/*
+	 * Create Dissassociate / Deauthenticate packet filter
+	 *
+	 *     2 bytes        2 byte    6 bytes   6 bytes  6 bytes
+	 *  +--------------+----------+---------+--------+--------+----
+	 *  + Frame Control+ Duration +   DA    +  SA    +  BSSID +
+	 *  +--------------+----------+---------+--------+--------+----
+	 *
+	 * The above is the management frame format for disassociate/
+	 * deauthenticate pattern, from this we need to match the first byte
+	 * of 'Frame Control' and DA, SA, and BSSID fields
+	 * (skipping 2nd byte of FC and Duration feild.
+	 *
+	 * Disassociate pattern
+	 * --------------------
+	 * Frame control = 00 00 1010
+	 * DA, SA, BSSID = x:x:x:x:x:x
+	 * Pattern will be A0000000 | x:x:x:x:x:x | x:x:x:x:x:x
+	 *			    | x:x:x:x:x:x  -- 22 bytes
+	 *
+	 * Deauthenticate pattern
+	 * ----------------------
+	 * Frame control = 00 00 1100
+	 * DA, SA, BSSID = x:x:x:x:x:x
+	 * Pattern will be C0000000 | x:x:x:x:x:x | x:x:x:x:x:x
+	 *			    | x:x:x:x:x:x  -- 22 bytes
+	 */
+
+	/* Create Disassociate Pattern first */
+
+	byte_cnt = 0;
+
+	/* Fill out the mask with all FF's */
+
+	for (i = 0; i < MAX_PATTERN_MASK_SIZE; i++)
+		dis_deauth_mask[i] = 0xff;
+
+	/* copy the first byte of frame control field */
+	dis_deauth_pattern[byte_cnt] = 0xa0;
+	byte_cnt++;
+
+	/* skip 2nd byte of frame control and Duration field */
+	byte_cnt += 3;
+
+	/*
+	 * need not match the destination mac address, it can be a broadcast
+	 * mac address or an unicast to this station
+	 */
+	byte_cnt += 6;
+
+	/* copy the source mac address */
+	memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
+
+	byte_cnt += 6;
+
+	/* copy the bssid, its same as the source mac address */
+
+	memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
+
+	/* Create Disassociate pattern mask */
+
+	dis_deauth_mask[0] = 0xfe;
+	dis_deauth_mask[1] = 0x03;
+	dis_deauth_mask[2] = 0xc0;
+
+	ath_dbg(common, WOW, "Adding disassoc/deauth patterns for WoW\n");
+
+	ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
+				   pattern_count, byte_cnt);
+
+	pattern_count++;
+	/*
+	 * for de-authenticate pattern, only the first byte of the frame
+	 * control field gets changed from 0xA0 to 0xC0
+	 */
+	dis_deauth_pattern[0] = 0xC0;
+
+	ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
+				   pattern_count, byte_cnt);
+
+}
+
+static void ath9k_wow_add_pattern(struct ath_softc *sc,
+				  struct cfg80211_wowlan *wowlan)
+{
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath9k_wow_pattern *wow_pattern = NULL;
+	struct cfg80211_pkt_pattern *patterns = wowlan->patterns;
+	int mask_len;
+	s8 i = 0;
+
+	if (!wowlan->n_patterns)
+		return;
+
+	/*
+	 * Add the new user configured patterns
+	 */
+	for (i = 0; i < wowlan->n_patterns; i++) {
+
+		wow_pattern = kzalloc(sizeof(*wow_pattern), GFP_KERNEL);
+
+		if (!wow_pattern)
+			return;
+
+		/*
+		 * TODO: convert the generic user space pattern to
+		 * appropriate chip specific/802.11 pattern.
+		 */
+
+		mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
+		memset(wow_pattern->pattern_bytes, 0, MAX_PATTERN_SIZE);
+		memset(wow_pattern->mask_bytes, 0, MAX_PATTERN_SIZE);
+		memcpy(wow_pattern->pattern_bytes, patterns[i].pattern,
+		       patterns[i].pattern_len);
+		memcpy(wow_pattern->mask_bytes, patterns[i].mask, mask_len);
+		wow_pattern->pattern_len = patterns[i].pattern_len;
+
+		/*
+		 * just need to take care of deauth and disssoc pattern,
+		 * make sure we don't overwrite them.
+		 */
+
+		ath9k_hw_wow_apply_pattern(ah, wow_pattern->pattern_bytes,
+					   wow_pattern->mask_bytes,
+					   i + 2,
+					   wow_pattern->pattern_len);
+		kfree(wow_pattern);
+
+	}
+
+}
+
+int ath9k_suspend(struct ieee80211_hw *hw,
+		  struct cfg80211_wowlan *wowlan)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	u32 wow_triggers_enabled = 0;
+	int ret = 0;
+
+	mutex_lock(&sc->mutex);
+
+	ath_cancel_work(sc);
+	ath_stop_ani(sc);
+	del_timer_sync(&sc->rx_poll_timer);
+
+	if (test_bit(SC_OP_INVALID, &sc->sc_flags)) {
+		ath_dbg(common, ANY, "Device not present\n");
+		ret = -EINVAL;
+		goto fail_wow;
+	}
+
+	if (WARN_ON(!wowlan)) {
+		ath_dbg(common, WOW, "None of the WoW triggers enabled\n");
+		ret = -EINVAL;
+		goto fail_wow;
+	}
+
+	if (!device_can_wakeup(sc->dev)) {
+		ath_dbg(common, WOW, "device_can_wakeup failed, WoW is not enabled\n");
+		ret = 1;
+		goto fail_wow;
+	}
+
+	/*
+	 * none of the sta vifs are associated
+	 * and we are not currently handling multivif
+	 * cases, for instance we have to seperately
+	 * configure 'keep alive frame' for each
+	 * STA.
+	 */
+
+	if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) {
+		ath_dbg(common, WOW, "None of the STA vifs are associated\n");
+		ret = 1;
+		goto fail_wow;
+	}
+
+	if (sc->nvifs > 1) {
+		ath_dbg(common, WOW, "WoW for multivif is not yet supported\n");
+		ret = 1;
+		goto fail_wow;
+	}
+
+	ath9k_wow_map_triggers(sc, wowlan, &wow_triggers_enabled);
+
+	ath_dbg(common, WOW, "WoW triggers enabled 0x%x\n",
+		wow_triggers_enabled);
+
+	ath9k_ps_wakeup(sc);
+
+	ath9k_stop_btcoex(sc);
+
+	/*
+	 * Enable wake up on recieving disassoc/deauth
+	 * frame by default.
+	 */
+	ath9k_wow_add_disassoc_deauth_pattern(sc);
+
+	if (wow_triggers_enabled & AH_WOW_USER_PATTERN_EN)
+		ath9k_wow_add_pattern(sc, wowlan);
+
+	spin_lock_bh(&sc->sc_pcu_lock);
+	/*
+	 * To avoid false wake, we enable beacon miss interrupt only
+	 * when we go to sleep. We save the current interrupt mask
+	 * so we can restore it after the system wakes up
+	 */
+	sc->wow_intr_before_sleep = ah->imask;
+	ah->imask &= ~ATH9K_INT_GLOBAL;
+	ath9k_hw_disable_interrupts(ah);
+	ah->imask = ATH9K_INT_BMISS | ATH9K_INT_GLOBAL;
+	ath9k_hw_set_interrupts(ah);
+	ath9k_hw_enable_interrupts(ah);
+
+	spin_unlock_bh(&sc->sc_pcu_lock);
+
+	/*
+	 * we can now sync irq and kill any running tasklets, since we already
+	 * disabled interrupts and not holding a spin lock
+	 */
+	synchronize_irq(sc->irq);
+	tasklet_kill(&sc->intr_tq);
+
+	ath9k_hw_wow_enable(ah, wow_triggers_enabled);
+
+	ath9k_ps_restore(sc);
+	ath_dbg(common, ANY, "WoW enabled in ath9k\n");
+	atomic_inc(&sc->wow_sleep_proc_intr);
+
+fail_wow:
+	mutex_unlock(&sc->mutex);
+	return ret;
+}
+
+int ath9k_resume(struct ieee80211_hw *hw)
+{
+	struct ath_softc *sc = hw->priv;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	u32 wow_status;
+
+	mutex_lock(&sc->mutex);
+
+	ath9k_ps_wakeup(sc);
+
+	spin_lock_bh(&sc->sc_pcu_lock);
+
+	ath9k_hw_disable_interrupts(ah);
+	ah->imask = sc->wow_intr_before_sleep;
+	ath9k_hw_set_interrupts(ah);
+	ath9k_hw_enable_interrupts(ah);
+
+	spin_unlock_bh(&sc->sc_pcu_lock);
+
+	wow_status = ath9k_hw_wow_wakeup(ah);
+
+	if (atomic_read(&sc->wow_got_bmiss_intr) == 0) {
+		/*
+		 * some devices may not pick beacon miss
+		 * as the reason they woke up so we add
+		 * that here for that shortcoming.
+		 */
+		wow_status |= AH_WOW_BEACON_MISS;
+		atomic_dec(&sc->wow_got_bmiss_intr);
+		ath_dbg(common, ANY, "Beacon miss interrupt picked up during WoW sleep\n");
+	}
+
+	atomic_dec(&sc->wow_sleep_proc_intr);
+
+	if (wow_status) {
+		ath_dbg(common, ANY, "Waking up due to WoW triggers %s with WoW status = %x\n",
+			ath9k_hw_wow_event_to_string(wow_status), wow_status);
+	}
+
+	ath_restart_work(sc);
+	ath9k_start_btcoex(sc);
+
+	ath9k_ps_restore(sc);
+	mutex_unlock(&sc->mutex);
+
+	return 0;
+}
+
+void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
+{
+	struct ath_softc *sc = hw->priv;
+
+	mutex_lock(&sc->mutex);
+	device_init_wakeup(sc->dev, 1);
+	device_set_wakeup_enable(sc->dev, enabled);
+	mutex_unlock(&sc->mutex);
+}
-- 
1.8.4.1

[PATCH 4/4] ath9k: Add an initialization routine for WoW

[Sujith Manoharan]

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  4 ++++
 drivers/net/wireless/ath/ath9k/init.c  | 20 +-------------------
 drivers/net/wireless/ath/ath9k/wow.c   | 20 ++++++++++++++++++++
 3 files changed, 25 insertions(+), 19 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 9e1b728..b351df3 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -575,11 +575,15 @@ static inline void ath_fill_led_pin(struct ath_softc *sc)
 /************************/
 
 #ifdef CONFIG_ATH9K_WOW
+void ath9k_init_wow(struct ieee80211_hw *hw);
 int ath9k_suspend(struct ieee80211_hw *hw,
 		  struct cfg80211_wowlan *wowlan);
 int ath9k_resume(struct ieee80211_hw *hw);
 void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled);
 #else
+static inline void ath9k_init_wow(struct ieee80211_hw *hw)
+{
+}
 static inline int ath9k_suspend(struct ieee80211_hw *hw,
 				struct cfg80211_wowlan *wowlan)
 {
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index ee7da65..600aa0b 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -870,15 +870,6 @@ static const struct ieee80211_iface_combination if_comb[] = {
 	}
 };
 
-#ifdef CONFIG_ATH9K_WOW
-static const struct wiphy_wowlan_support ath9k_wowlan_support = {
-	.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
-	.n_patterns = MAX_NUM_USER_PATTERN,
-	.pattern_min_len = 1,
-	.pattern_max_len = MAX_PATTERN_SIZE,
-};
-#endif
-
 void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 {
 	struct ath_hw *ah = sc->sc_ah;
@@ -928,16 +919,6 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
 	hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
 
-#ifdef CONFIG_ATH9K_WOW
-	if ((ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) &&
-	    (sc->driver_data & ATH9K_PCI_WOW) &&
-	    device_can_wakeup(sc->dev))
-		hw->wiphy->wowlan = &ath9k_wowlan_support;
-
-	atomic_set(&sc->wow_sleep_proc_intr, -1);
-	atomic_set(&sc->wow_got_bmiss_intr, -1);
-#endif
-
 	hw->queues = 4;
 	hw->max_rates = 4;
 	hw->channel_change_time = 5000;
@@ -963,6 +944,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
 			&sc->sbands[IEEE80211_BAND_5GHZ];
 
+	ath9k_init_wow(hw);
 	ath9k_reload_chainmask_settings(sc);
 
 	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index e161bbc..f1cde81 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -16,6 +16,13 @@
 
 #include "ath9k.h"
 
+static const struct wiphy_wowlan_support ath9k_wowlan_support = {
+	.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
+	.n_patterns = MAX_NUM_USER_PATTERN,
+	.pattern_min_len = 1,
+	.pattern_max_len = MAX_PATTERN_SIZE,
+};
+
 static void ath9k_wow_map_triggers(struct ath_softc *sc,
 				   struct cfg80211_wowlan *wowlan,
 				   u32 *wow_triggers)
@@ -339,3 +346,16 @@ void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
 	device_set_wakeup_enable(sc->dev, enabled);
 	mutex_unlock(&sc->mutex);
 }
+
+void ath9k_init_wow(struct ieee80211_hw *hw)
+{
+	struct ath_softc *sc = hw->priv;
+
+	if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) &&
+	    (sc->driver_data & ATH9K_PCI_WOW) &&
+	    device_can_wakeup(sc->dev))
+		hw->wiphy->wowlan = &ath9k_wowlan_support;
+
+	atomic_set(&sc->wow_sleep_proc_intr, -1);
+	atomic_set(&sc->wow_got_bmiss_intr, -1);
+}
-- 
1.8.4.1