* [PATCH 1/4] wil6210: delay remain on channel when scan is active
2016-11-28 11:48 [PATCH 0/4] wil6210 patches Maya Erez
@ 2016-11-28 11:49 ` Maya Erez
2016-12-01 11:21 ` [1/4] " Kalle Valo
2016-11-28 11:49 ` [PATCH 2/4] wil6210: validate wil_pmc_alloc parameters Maya Erez
` (2 subsequent siblings)
3 siblings, 1 reply; 9+ messages in thread
From: Maya Erez @ 2016-11-28 11:49 UTC (permalink / raw)
To: Kalle Valo; +Cc: Lior David, linux-wireless, wil6210, Maya Erez
From: Lior David <qca_liord@qca.qualcomm.com>
Currently it was possible to call remain_on_channel(ROC)
while scan was active and this caused a crash in the FW.
In order to fix this problem and make the behavior
consistent with other drivers, queue the ROC in case
a scan is active and try it again when scan is done.
As part of the fix, clean up some locking issues and
return error if scan is called while ROC is active.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 45 ++++-----
drivers/net/wireless/ath/wil6210/main.c | 2 +
drivers/net/wireless/ath/wil6210/p2p.c | 150 +++++++++++++++++++++-------
drivers/net/wireless/ath/wil6210/wil6210.h | 9 +-
drivers/net/wireless/ath/wil6210/wmi.c | 4 +
5 files changed, 149 insertions(+), 61 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 22078b0..6aa3ff4 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -354,14 +354,6 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
wil_dbg_misc(wil, "%s(), wdev=0x%p iftype=%d\n",
__func__, wdev, wdev->iftype);
- mutex_lock(&wil->p2p_wdev_mutex);
- if (wil->scan_request) {
- wil_err(wil, "Already scanning\n");
- mutex_unlock(&wil->p2p_wdev_mutex);
- return -EAGAIN;
- }
- mutex_unlock(&wil->p2p_wdev_mutex);
-
/* check we are client side */
switch (wdev->iftype) {
case NL80211_IFTYPE_STATION:
@@ -378,12 +370,24 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
return -EBUSY;
}
+ mutex_lock(&wil->mutex);
+
+ mutex_lock(&wil->p2p_wdev_mutex);
+ if (wil->scan_request || wil->p2p.discovery_started) {
+ wil_err(wil, "Already scanning\n");
+ mutex_unlock(&wil->p2p_wdev_mutex);
+ rc = -EAGAIN;
+ goto out;
+ }
+ mutex_unlock(&wil->p2p_wdev_mutex);
+
/* social scan on P2P_DEVICE is handled as p2p search */
if (wdev->iftype == NL80211_IFTYPE_P2P_DEVICE &&
wil_p2p_is_social_scan(request)) {
if (!wil->p2p.p2p_dev_started) {
wil_err(wil, "P2P search requested on stopped P2P device\n");
- return -EIO;
+ rc = -EIO;
+ goto out;
}
wil->scan_request = request;
wil->radio_wdev = wdev;
@@ -392,7 +396,7 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
wil->radio_wdev = wil_to_wdev(wil);
wil->scan_request = NULL;
}
- return rc;
+ goto out;
}
(void)wil_p2p_stop_discovery(wil);
@@ -415,7 +419,7 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
if (rc) {
wil_err(wil, "set SSID for scan request failed: %d\n", rc);
- return rc;
+ goto out;
}
wil->scan_request = request;
@@ -448,7 +452,7 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
rc = wmi_set_ie(wil, WMI_FRAME_PROBE_REQ, request->ie_len, request->ie);
if (rc)
- goto out;
+ goto out_restore;
if (wil->discovery_mode && cmd.cmd.scan_type == WMI_ACTIVE_SCAN) {
cmd.cmd.discovery_mode = 1;
@@ -459,13 +463,14 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
rc = wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) +
cmd.cmd.num_channels * sizeof(cmd.cmd.channel_list[0]));
-out:
+out_restore:
if (rc) {
del_timer_sync(&wil->scan_timer);
wil->radio_wdev = wil_to_wdev(wil);
wil->scan_request = NULL;
}
-
+out:
+ mutex_unlock(&wil->mutex);
return rc;
}
@@ -988,16 +993,8 @@ static int wil_remain_on_channel(struct wiphy *wiphy,
wil_dbg_misc(wil, "%s() center_freq=%d, duration=%d iftype=%d\n",
__func__, chan->center_freq, duration, wdev->iftype);
- rc = wil_p2p_listen(wil, duration, chan, cookie);
- if (rc)
- return rc;
-
- wil->radio_wdev = wdev;
-
- cfg80211_ready_on_channel(wdev, *cookie, chan, duration,
- GFP_KERNEL);
-
- return 0;
+ rc = wil_p2p_listen(wil, wdev, duration, chan, cookie);
+ return rc;
}
static int wil_cancel_remain_on_channel(struct wiphy *wiphy,
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 70f9c07..e2e021b 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -518,6 +518,7 @@ int wil_priv_init(struct wil6210_priv *wil)
INIT_WORK(&wil->wmi_event_worker, wmi_event_worker);
INIT_WORK(&wil->fw_error_worker, wil_fw_error_worker);
INIT_WORK(&wil->probe_client_worker, wil_probe_client_worker);
+ INIT_WORK(&wil->p2p.delayed_listen_work, wil_p2p_delayed_listen_work);
INIT_LIST_HEAD(&wil->pending_wmi_ev);
INIT_LIST_HEAD(&wil->probe_client_pending);
@@ -579,6 +580,7 @@ void wil_priv_deinit(struct wil6210_priv *wil)
cancel_work_sync(&wil->disconnect_worker);
cancel_work_sync(&wil->fw_error_worker);
cancel_work_sync(&wil->p2p.discovery_expired_work);
+ cancel_work_sync(&wil->p2p.delayed_listen_work);
mutex_lock(&wil->mutex);
wil6210_disconnect(wil, NULL, WLAN_REASON_DEAUTH_LEAVING, false);
mutex_unlock(&wil->mutex);
diff --git a/drivers/net/wireless/ath/wil6210/p2p.c b/drivers/net/wireless/ath/wil6210/p2p.c
index 4f0eab0..fbae995 100644
--- a/drivers/net/wireless/ath/wil6210/p2p.c
+++ b/drivers/net/wireless/ath/wil6210/p2p.c
@@ -22,6 +22,43 @@
#define P2P_SEARCH_DURATION_MS 500
#define P2P_DEFAULT_BI 100
+static int wil_p2p_start_listen(struct wil6210_priv *wil)
+{
+ struct wil_p2p_info *p2p = &wil->p2p;
+ u8 channel = p2p->listen_chan.hw_value;
+ int rc;
+
+ lockdep_assert_held(&wil->mutex);
+
+ rc = wmi_p2p_cfg(wil, channel, P2P_DEFAULT_BI);
+ if (rc) {
+ wil_err(wil, "wmi_p2p_cfg failed\n");
+ goto out;
+ }
+
+ rc = wmi_set_ssid(wil, strlen(P2P_WILDCARD_SSID), P2P_WILDCARD_SSID);
+ if (rc) {
+ wil_err(wil, "wmi_set_ssid failed\n");
+ goto out_stop;
+ }
+
+ rc = wmi_start_listen(wil);
+ if (rc) {
+ wil_err(wil, "wmi_start_listen failed\n");
+ goto out_stop;
+ }
+
+ INIT_WORK(&p2p->discovery_expired_work, wil_p2p_listen_expired);
+ mod_timer(&p2p->discovery_timer,
+ jiffies + msecs_to_jiffies(p2p->listen_duration));
+out_stop:
+ if (rc)
+ wmi_stop_discovery(wil);
+
+out:
+ return rc;
+}
+
bool wil_p2p_is_social_scan(struct cfg80211_scan_request *request)
{
return (request->n_channels == 1) &&
@@ -46,7 +83,7 @@ int wil_p2p_search(struct wil6210_priv *wil,
wil_dbg_misc(wil, "%s: channel %d\n",
__func__, P2P_DMG_SOCIAL_CHANNEL);
- mutex_lock(&wil->mutex);
+ lockdep_assert_held(&wil->mutex);
if (p2p->discovery_started) {
wil_err(wil, "%s: search failed. discovery already ongoing\n",
@@ -103,22 +140,19 @@ int wil_p2p_search(struct wil6210_priv *wil,
wmi_stop_discovery(wil);
out:
- mutex_unlock(&wil->mutex);
return rc;
}
-int wil_p2p_listen(struct wil6210_priv *wil, unsigned int duration,
- struct ieee80211_channel *chan, u64 *cookie)
+int wil_p2p_listen(struct wil6210_priv *wil, struct wireless_dev *wdev,
+ unsigned int duration, struct ieee80211_channel *chan,
+ u64 *cookie)
{
struct wil_p2p_info *p2p = &wil->p2p;
- u8 channel = P2P_DMG_SOCIAL_CHANNEL;
int rc;
if (!chan)
return -EINVAL;
- channel = chan->hw_value;
-
wil_dbg_misc(wil, "%s: duration %d\n", __func__, duration);
mutex_lock(&wil->mutex);
@@ -129,35 +163,30 @@ int wil_p2p_listen(struct wil6210_priv *wil, unsigned int duration,
goto out;
}
- rc = wmi_p2p_cfg(wil, channel, P2P_DEFAULT_BI);
- if (rc) {
- wil_err(wil, "%s: wmi_p2p_cfg failed\n", __func__);
- goto out;
- }
-
- rc = wmi_set_ssid(wil, strlen(P2P_WILDCARD_SSID), P2P_WILDCARD_SSID);
- if (rc) {
- wil_err(wil, "%s: wmi_set_ssid failed\n", __func__);
- goto out_stop;
- }
+ memcpy(&p2p->listen_chan, chan, sizeof(*chan));
+ *cookie = ++p2p->cookie;
+ p2p->listen_duration = duration;
- rc = wmi_start_listen(wil);
- if (rc) {
- wil_err(wil, "%s: wmi_start_listen failed\n", __func__);
- goto out_stop;
+ mutex_lock(&wil->p2p_wdev_mutex);
+ if (wil->scan_request) {
+ wil_dbg_misc(wil, "Delaying p2p listen until scan done\n");
+ p2p->pending_listen_wdev = wdev;
+ p2p->discovery_started = 1;
+ rc = 0;
+ mutex_unlock(&wil->p2p_wdev_mutex);
+ goto out;
}
+ mutex_unlock(&wil->p2p_wdev_mutex);
- memcpy(&p2p->listen_chan, chan, sizeof(*chan));
- *cookie = ++p2p->cookie;
+ rc = wil_p2p_start_listen(wil);
+ if (rc)
+ goto out;
p2p->discovery_started = 1;
- INIT_WORK(&p2p->discovery_expired_work, wil_p2p_listen_expired);
- mod_timer(&p2p->discovery_timer,
- jiffies + msecs_to_jiffies(duration));
+ wil->radio_wdev = wdev;
-out_stop:
- if (rc)
- wmi_stop_discovery(wil);
+ cfg80211_ready_on_channel(wdev, *cookie, chan, duration,
+ GFP_KERNEL);
out:
mutex_unlock(&wil->mutex);
@@ -170,9 +199,14 @@ u8 wil_p2p_stop_discovery(struct wil6210_priv *wil)
u8 started = p2p->discovery_started;
if (p2p->discovery_started) {
- del_timer_sync(&p2p->discovery_timer);
+ if (p2p->pending_listen_wdev) {
+ /* discovery not really started, only pending */
+ p2p->pending_listen_wdev = NULL;
+ } else {
+ del_timer_sync(&p2p->discovery_timer);
+ wmi_stop_discovery(wil);
+ }
p2p->discovery_started = 0;
- wmi_stop_discovery(wil);
}
return started;
@@ -257,11 +291,57 @@ void wil_p2p_search_expired(struct work_struct *work)
};
mutex_lock(&wil->p2p_wdev_mutex);
- cfg80211_scan_done(wil->scan_request, &info);
- wil->scan_request = NULL;
- wil->radio_wdev = wil->wdev;
+ if (wil->scan_request) {
+ cfg80211_scan_done(wil->scan_request, &info);
+ wil->scan_request = NULL;
+ wil->radio_wdev = wil->wdev;
+ }
+ mutex_unlock(&wil->p2p_wdev_mutex);
+ }
+}
+
+void wil_p2p_delayed_listen_work(struct work_struct *work)
+{
+ struct wil_p2p_info *p2p = container_of(work,
+ struct wil_p2p_info, delayed_listen_work);
+ struct wil6210_priv *wil = container_of(p2p,
+ struct wil6210_priv, p2p);
+ int rc;
+
+ mutex_lock(&wil->mutex);
+
+ wil_dbg_misc(wil, "Checking delayed p2p listen\n");
+ if (!p2p->discovery_started || !p2p->pending_listen_wdev)
+ goto out;
+
+ mutex_lock(&wil->p2p_wdev_mutex);
+ if (wil->scan_request) {
+ /* another scan started, wait again... */
mutex_unlock(&wil->p2p_wdev_mutex);
+ goto out;
}
+ mutex_unlock(&wil->p2p_wdev_mutex);
+
+ rc = wil_p2p_start_listen(wil);
+
+ mutex_lock(&wil->p2p_wdev_mutex);
+ if (rc) {
+ cfg80211_remain_on_channel_expired(p2p->pending_listen_wdev,
+ p2p->cookie,
+ &p2p->listen_chan,
+ GFP_KERNEL);
+ wil->radio_wdev = wil->wdev;
+ } else {
+ cfg80211_ready_on_channel(p2p->pending_listen_wdev, p2p->cookie,
+ &p2p->listen_chan,
+ p2p->listen_duration, GFP_KERNEL);
+ wil->radio_wdev = p2p->pending_listen_wdev;
+ }
+ p2p->pending_listen_wdev = NULL;
+ mutex_unlock(&wil->p2p_wdev_mutex);
+
+out:
+ mutex_unlock(&wil->mutex);
}
void wil_p2p_stop_radio_operations(struct wil6210_priv *wil)
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index b449f84..ef95db9 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -461,8 +461,11 @@ struct wil_p2p_info {
u8 discovery_started;
u8 p2p_dev_started;
u64 cookie;
+ struct wireless_dev *pending_listen_wdev;
+ unsigned int listen_duration;
struct timer_list discovery_timer; /* listen/search duration */
struct work_struct discovery_expired_work; /* listen/search expire */
+ struct work_struct delayed_listen_work; /* listen after scan done */
};
enum wil_sta_status {
@@ -843,13 +846,15 @@ int wil_addba_rx_request(struct wil6210_priv *wil, u8 cidxtid,
void wil_p2p_discovery_timer_fn(ulong x);
int wil_p2p_search(struct wil6210_priv *wil,
struct cfg80211_scan_request *request);
-int wil_p2p_listen(struct wil6210_priv *wil, unsigned int duration,
- struct ieee80211_channel *chan, u64 *cookie);
+int wil_p2p_listen(struct wil6210_priv *wil, struct wireless_dev *wdev,
+ unsigned int duration, struct ieee80211_channel *chan,
+ u64 *cookie);
u8 wil_p2p_stop_discovery(struct wil6210_priv *wil);
int wil_p2p_cancel_listen(struct wil6210_priv *wil, u64 cookie);
void wil_p2p_listen_expired(struct work_struct *work);
void wil_p2p_search_expired(struct work_struct *work);
void wil_p2p_stop_radio_operations(struct wil6210_priv *wil);
+void wil_p2p_delayed_listen_work(struct work_struct *work);
/* WMI for P2P */
int wmi_p2p_cfg(struct wil6210_priv *wil, int channel, int bi);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 2971ddf..d289a4d 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -441,6 +441,10 @@ static void wmi_evt_scan_complete(struct wil6210_priv *wil, int id,
wil->radio_wdev = wil->wdev;
wil->scan_request = NULL;
wake_up_interruptible(&wil->wq);
+ if (wil->p2p.pending_listen_wdev) {
+ wil_dbg_misc(wil, "Scheduling delayed listen\n");
+ schedule_work(&wil->p2p.delayed_listen_work);
+ }
} else {
wil_err(wil, "SCAN_COMPLETE while not scanning\n");
}
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [1/4] wil6210: delay remain on channel when scan is active
2016-11-28 11:49 ` [PATCH 1/4] wil6210: delay remain on channel when scan is active Maya Erez
@ 2016-12-01 11:21 ` Kalle Valo
0 siblings, 0 replies; 9+ messages in thread
From: Kalle Valo @ 2016-12-01 11:21 UTC (permalink / raw)
To: Maya Erez; +Cc: Kalle Valo, Lior David, linux-wireless, wil6210, Maya Erez
Maya Erez <qca_merez@qca.qualcomm.com> wrote:
> From: Lior David <qca_liord@qca.qualcomm.com>
>
> Currently it was possible to call remain_on_channel(ROC)
> while scan was active and this caused a crash in the FW.
> In order to fix this problem and make the behavior
> consistent with other drivers, queue the ROC in case
> a scan is active and try it again when scan is done.
> As part of the fix, clean up some locking issues and
> return error if scan is called while ROC is active.
>
> Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
4 patches applied to ath-next branch of ath.git, thanks.
bb6743f7c2ff wil6210: delay remain on channel when scan is active
1db226ffe1c2 wil6210: validate wil_pmc_alloc parameters
615788200557 wil6210: add debugfs blobs for UCODE code and data
8ae5d62c7eba wil6210: align to latest auto generated wmi.h
--
https://patchwork.kernel.org/patch/9449393/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 2/4] wil6210: validate wil_pmc_alloc parameters
2016-11-28 11:48 [PATCH 0/4] wil6210 patches Maya Erez
2016-11-28 11:49 ` [PATCH 1/4] wil6210: delay remain on channel when scan is active Maya Erez
@ 2016-11-28 11:49 ` Maya Erez
2016-11-28 11:49 ` [PATCH 3/4] wil6210: add debugfs blobs for UCODE code and data Maya Erez
2016-11-28 11:49 ` [PATCH 4/4] wil6210: align to latest auto generated wmi.h Maya Erez
3 siblings, 0 replies; 9+ messages in thread
From: Maya Erez @ 2016-11-28 11:49 UTC (permalink / raw)
To: Kalle Valo; +Cc: Maya Erez, linux-wireless, wil6210
num_descriptors and descriptor_size needs to be
checked for:
1) not being negative values
2) no overflow occurs when these are multiplied
together as done in wil_pmc_read.
An overflow of two signed integers is undefined
behavior.
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/pmc.c | 55 ++++++++++++++++++++++++++++++----
1 file changed, 49 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/pmc.c b/drivers/net/wireless/ath/wil6210/pmc.c
index 5ca0307..b9faae0 100644
--- a/drivers/net/wireless/ath/wil6210/pmc.c
+++ b/drivers/net/wireless/ath/wil6210/pmc.c
@@ -54,6 +54,7 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
struct pmc_ctx *pmc = &wil->pmc;
struct device *dev = wil_to_dev(wil);
struct wmi_pmc_cmd pmc_cmd = {0};
+ int last_cmd_err = -ENOMEM;
mutex_lock(&pmc->lock);
@@ -62,6 +63,29 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
wil_err(wil, "%s: ERROR pmc is already allocated\n", __func__);
goto no_release_err;
}
+ if ((num_descriptors <= 0) || (descriptor_size <= 0)) {
+ wil_err(wil,
+ "Invalid params num_descriptors(%d), descriptor_size(%d)\n",
+ num_descriptors, descriptor_size);
+ last_cmd_err = -EINVAL;
+ goto no_release_err;
+ }
+
+ if (num_descriptors > (1 << WIL_RING_SIZE_ORDER_MAX)) {
+ wil_err(wil,
+ "num_descriptors(%d) exceeds max ring size %d\n",
+ num_descriptors, 1 << WIL_RING_SIZE_ORDER_MAX);
+ last_cmd_err = -EINVAL;
+ goto no_release_err;
+ }
+
+ if (num_descriptors > INT_MAX / descriptor_size) {
+ wil_err(wil,
+ "Overflow in num_descriptors(%d)*descriptor_size(%d)\n",
+ num_descriptors, descriptor_size);
+ last_cmd_err = -EINVAL;
+ goto no_release_err;
+ }
pmc->num_descriptors = num_descriptors;
pmc->descriptor_size = descriptor_size;
@@ -189,7 +213,7 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
pmc->descriptors = NULL;
no_release_err:
- pmc->last_cmd_status = -ENOMEM;
+ pmc->last_cmd_status = last_cmd_err;
mutex_unlock(&pmc->lock);
}
@@ -295,7 +319,7 @@ ssize_t wil_pmc_read(struct file *filp, char __user *buf, size_t count,
size_t retval = 0;
unsigned long long idx;
loff_t offset;
- size_t pmc_size = pmc->descriptor_size * pmc->num_descriptors;
+ size_t pmc_size;
mutex_lock(&pmc->lock);
@@ -306,6 +330,8 @@ ssize_t wil_pmc_read(struct file *filp, char __user *buf, size_t count,
return -EPERM;
}
+ pmc_size = pmc->descriptor_size * pmc->num_descriptors;
+
wil_dbg_misc(wil,
"%s: size %u, pos %lld\n",
__func__, (unsigned)count, *f_pos);
@@ -345,7 +371,18 @@ loff_t wil_pmc_llseek(struct file *filp, loff_t off, int whence)
loff_t newpos;
struct wil6210_priv *wil = filp->private_data;
struct pmc_ctx *pmc = &wil->pmc;
- size_t pmc_size = pmc->descriptor_size * pmc->num_descriptors;
+ size_t pmc_size;
+
+ mutex_lock(&pmc->lock);
+
+ if (!wil_is_pmc_allocated(pmc)) {
+ wil_err(wil, "error, pmc is not allocated!\n");
+ pmc->last_cmd_status = -EPERM;
+ mutex_unlock(&pmc->lock);
+ return -EPERM;
+ }
+
+ pmc_size = pmc->descriptor_size * pmc->num_descriptors;
switch (whence) {
case 0: /* SEEK_SET */
@@ -361,15 +398,21 @@ loff_t wil_pmc_llseek(struct file *filp, loff_t off, int whence)
break;
default: /* can't happen */
- return -EINVAL;
+ newpos = -EINVAL;
+ goto out;
}
- if (newpos < 0)
- return -EINVAL;
+ if (newpos < 0) {
+ newpos = -EINVAL;
+ goto out;
+ }
if (newpos > pmc_size)
newpos = pmc_size;
filp->f_pos = newpos;
+out:
+ mutex_unlock(&pmc->lock);
+
return newpos;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 3/4] wil6210: add debugfs blobs for UCODE code and data
2016-11-28 11:48 [PATCH 0/4] wil6210 patches Maya Erez
2016-11-28 11:49 ` [PATCH 1/4] wil6210: delay remain on channel when scan is active Maya Erez
2016-11-28 11:49 ` [PATCH 2/4] wil6210: validate wil_pmc_alloc parameters Maya Erez
@ 2016-11-28 11:49 ` Maya Erez
2016-11-28 11:49 ` [PATCH 4/4] wil6210: align to latest auto generated wmi.h Maya Erez
3 siblings, 0 replies; 9+ messages in thread
From: Maya Erez @ 2016-11-28 11:49 UTC (permalink / raw)
To: Kalle Valo; +Cc: Lior David, linux-wireless, wil6210, Maya Erez
From: Lior David <qca_liord@qca.qualcomm.com>
Added new areas to fw_mappings area for UCODE code
and data areas.
The new areas are only exposed through debugfs blobs,
and mainly needed to access UCODE logs.
The change does not affect crash dumps because the
newly added areas overlap with the "upper" area which
is already dumped.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/wil6210.h | 3 +-
drivers/net/wireless/ath/wil6210/wil_crash_dump.c | 6 ++++
drivers/net/wireless/ath/wil6210/wmi.c | 39 +++++++++++++++--------
3 files changed, 33 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index ef95db9..237e166 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -276,10 +276,11 @@ struct fw_map {
u32 to; /* linker address - to, exclusive */
u32 host; /* PCI/Host address - BAR0 + 0x880000 */
const char *name; /* for debugfs */
+ bool fw; /* true if FW mapping, false if UCODE mapping */
};
/* array size should be in sync with actual definition in the wmi.c */
-extern const struct fw_map fw_mapping[8];
+extern const struct fw_map fw_mapping[10];
/**
* mk_cidxtid - construct @cidxtid field
diff --git a/drivers/net/wireless/ath/wil6210/wil_crash_dump.c b/drivers/net/wireless/ath/wil6210/wil_crash_dump.c
index b57d280..d051eea 100644
--- a/drivers/net/wireless/ath/wil6210/wil_crash_dump.c
+++ b/drivers/net/wireless/ath/wil6210/wil_crash_dump.c
@@ -36,6 +36,9 @@ static int wil_fw_get_crash_dump_bounds(struct wil6210_priv *wil,
for (i = 1; i < ARRAY_SIZE(fw_mapping); i++) {
map = &fw_mapping[i];
+ if (!map->fw)
+ continue;
+
if (map->host < host_min)
host_min = map->host;
@@ -73,6 +76,9 @@ int wil_fw_copy_crash_dump(struct wil6210_priv *wil, void *dest, u32 size)
for (i = 0; i < ARRAY_SIZE(fw_mapping); i++) {
map = &fw_mapping[i];
+ if (!map->fw)
+ continue;
+
data = (void * __force)wil->csr + HOSTADDR(map->host);
len = map->to - map->from;
offset = map->host - host_min;
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index d289a4d..7585003 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -84,19 +84,29 @@
* array size should be in sync with the declaration in the wil6210.h
*/
const struct fw_map fw_mapping[] = {
- {0x000000, 0x040000, 0x8c0000, "fw_code"}, /* FW code RAM 256k */
- {0x800000, 0x808000, 0x900000, "fw_data"}, /* FW data RAM 32k */
- {0x840000, 0x860000, 0x908000, "fw_peri"}, /* periph. data RAM 128k */
- {0x880000, 0x88a000, 0x880000, "rgf"}, /* various RGF 40k */
- {0x88a000, 0x88b000, 0x88a000, "AGC_tbl"}, /* AGC table 4k */
- {0x88b000, 0x88c000, 0x88b000, "rgf_ext"}, /* Pcie_ext_rgf 4k */
- {0x88c000, 0x88c200, 0x88c000, "mac_rgf_ext"}, /* mac_ext_rgf 512b */
- {0x8c0000, 0x949000, 0x8c0000, "upper"}, /* upper area 548k */
- /*
- * 920000..930000 ucode code RAM
- * 930000..932000 ucode data RAM
- * 932000..949000 back-door debug data
+ /* FW code RAM 256k */
+ {0x000000, 0x040000, 0x8c0000, "fw_code", true},
+ /* FW data RAM 32k */
+ {0x800000, 0x808000, 0x900000, "fw_data", true},
+ /* periph data 128k */
+ {0x840000, 0x860000, 0x908000, "fw_peri", true},
+ /* various RGF 40k */
+ {0x880000, 0x88a000, 0x880000, "rgf", true},
+ /* AGC table 4k */
+ {0x88a000, 0x88b000, 0x88a000, "AGC_tbl", true},
+ /* Pcie_ext_rgf 4k */
+ {0x88b000, 0x88c000, 0x88b000, "rgf_ext", true},
+ /* mac_ext_rgf 512b */
+ {0x88c000, 0x88c200, 0x88c000, "mac_rgf_ext", true},
+ /* upper area 548k */
+ {0x8c0000, 0x949000, 0x8c0000, "upper", true},
+ /* UCODE areas - accessible by debugfs blobs but not by
+ * wmi_addr_remap. UCODE areas MUST be added AFTER FW areas!
*/
+ /* ucode code RAM 128k */
+ {0x000000, 0x020000, 0x920000, "uc_code", false},
+ /* ucode data RAM 16k */
+ {0x800000, 0x804000, 0x940000, "uc_data", false},
};
struct blink_on_off_time led_blink_time[] = {
@@ -108,7 +118,7 @@ struct blink_on_off_time led_blink_time[] = {
u8 led_polarity = LED_POLARITY_LOW_ACTIVE;
/**
- * return AHB address for given firmware/ucode internal (linker) address
+ * return AHB address for given firmware internal (linker) address
* @x - internal address
* If address have no valid AHB mapping, return 0
*/
@@ -117,7 +127,8 @@ static u32 wmi_addr_remap(u32 x)
uint i;
for (i = 0; i < ARRAY_SIZE(fw_mapping); i++) {
- if ((x >= fw_mapping[i].from) && (x < fw_mapping[i].to))
+ if (fw_mapping[i].fw &&
+ ((x >= fw_mapping[i].from) && (x < fw_mapping[i].to)))
return x + fw_mapping[i].host - fw_mapping[i].from;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 4/4] wil6210: align to latest auto generated wmi.h
2016-11-28 11:48 [PATCH 0/4] wil6210 patches Maya Erez
` (2 preceding siblings ...)
2016-11-28 11:49 ` [PATCH 3/4] wil6210: add debugfs blobs for UCODE code and data Maya Erez
@ 2016-11-28 11:49 ` Maya Erez
3 siblings, 0 replies; 9+ messages in thread
From: Maya Erez @ 2016-11-28 11:49 UTC (permalink / raw)
To: Kalle Valo; +Cc: Lior David, linux-wireless, wil6210, Maya Erez
From: Lior David <qca_liord@qca.qualcomm.com>
Align to latest version of the auto generated wmi file
describing the interface with FW.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/wmi.h | 392 ++++++++++++++++++++++-----------
1 file changed, 264 insertions(+), 128 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index 2cc7775..d93a4d4 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -35,6 +35,7 @@
#define WMI_MAC_LEN (6)
#define WMI_PROX_RANGE_NUM (3)
#define WMI_MAX_LOSS_DMG_BEACONS (20)
+#define MAX_NUM_OF_SECTORS (128)
/* Mailbox interface
* used for commands and events
@@ -68,144 +69,149 @@ struct wmi_cmd_hdr {
/* List of Commands */
enum wmi_command_id {
- WMI_CONNECT_CMDID = 0x01,
- WMI_DISCONNECT_CMDID = 0x03,
- WMI_DISCONNECT_STA_CMDID = 0x04,
- WMI_START_SCAN_CMDID = 0x07,
- WMI_SET_BSS_FILTER_CMDID = 0x09,
- WMI_SET_PROBED_SSID_CMDID = 0x0A,
- WMI_SET_LISTEN_INT_CMDID = 0x0B,
- WMI_BCON_CTRL_CMDID = 0x0F,
- WMI_ADD_CIPHER_KEY_CMDID = 0x16,
- WMI_DELETE_CIPHER_KEY_CMDID = 0x17,
- WMI_PCP_CONF_CMDID = 0x18,
- WMI_SET_APPIE_CMDID = 0x3F,
- WMI_SET_WSC_STATUS_CMDID = 0x41,
- WMI_PXMT_RANGE_CFG_CMDID = 0x42,
- WMI_PXMT_SNR2_RANGE_CFG_CMDID = 0x43,
- WMI_MEM_READ_CMDID = 0x800,
- WMI_MEM_WR_CMDID = 0x801,
- WMI_ECHO_CMDID = 0x803,
- WMI_DEEP_ECHO_CMDID = 0x804,
- WMI_CONFIG_MAC_CMDID = 0x805,
- WMI_CONFIG_PHY_DEBUG_CMDID = 0x806,
- WMI_ADD_DEBUG_TX_PCKT_CMDID = 0x808,
- WMI_PHY_GET_STATISTICS_CMDID = 0x809,
- WMI_FS_TUNE_CMDID = 0x80A,
- WMI_CORR_MEASURE_CMDID = 0x80B,
- WMI_READ_RSSI_CMDID = 0x80C,
- WMI_TEMP_SENSE_CMDID = 0x80E,
- WMI_DC_CALIB_CMDID = 0x80F,
- WMI_SEND_TONE_CMDID = 0x810,
- WMI_IQ_TX_CALIB_CMDID = 0x811,
- WMI_IQ_RX_CALIB_CMDID = 0x812,
- WMI_SET_UCODE_IDLE_CMDID = 0x813,
- WMI_SET_WORK_MODE_CMDID = 0x815,
- WMI_LO_LEAKAGE_CALIB_CMDID = 0x816,
- WMI_MARLON_R_READ_CMDID = 0x818,
- WMI_MARLON_R_WRITE_CMDID = 0x819,
- WMI_MARLON_R_TXRX_SEL_CMDID = 0x81A,
- MAC_IO_STATIC_PARAMS_CMDID = 0x81B,
- MAC_IO_DYNAMIC_PARAMS_CMDID = 0x81C,
- WMI_SILENT_RSSI_CALIB_CMDID = 0x81D,
- WMI_RF_RX_TEST_CMDID = 0x81E,
- WMI_CFG_RX_CHAIN_CMDID = 0x820,
- WMI_VRING_CFG_CMDID = 0x821,
- WMI_BCAST_VRING_CFG_CMDID = 0x822,
- WMI_VRING_BA_EN_CMDID = 0x823,
- WMI_VRING_BA_DIS_CMDID = 0x824,
- WMI_RCP_ADDBA_RESP_CMDID = 0x825,
- WMI_RCP_DELBA_CMDID = 0x826,
- WMI_SET_SSID_CMDID = 0x827,
- WMI_GET_SSID_CMDID = 0x828,
- WMI_SET_PCP_CHANNEL_CMDID = 0x829,
- WMI_GET_PCP_CHANNEL_CMDID = 0x82A,
- WMI_SW_TX_REQ_CMDID = 0x82B,
- WMI_READ_MAC_RXQ_CMDID = 0x830,
- WMI_READ_MAC_TXQ_CMDID = 0x831,
- WMI_WRITE_MAC_RXQ_CMDID = 0x832,
- WMI_WRITE_MAC_TXQ_CMDID = 0x833,
- WMI_WRITE_MAC_XQ_FIELD_CMDID = 0x834,
- WMI_MLME_PUSH_CMDID = 0x835,
- WMI_BEAMFORMING_MGMT_CMDID = 0x836,
- WMI_BF_TXSS_MGMT_CMDID = 0x837,
- WMI_BF_SM_MGMT_CMDID = 0x838,
- WMI_BF_RXSS_MGMT_CMDID = 0x839,
- WMI_BF_TRIG_CMDID = 0x83A,
- WMI_LINK_MAINTAIN_CFG_WRITE_CMDID = 0x842,
- WMI_LINK_MAINTAIN_CFG_READ_CMDID = 0x843,
- WMI_SET_SECTORS_CMDID = 0x849,
- WMI_MAINTAIN_PAUSE_CMDID = 0x850,
- WMI_MAINTAIN_RESUME_CMDID = 0x851,
- WMI_RS_MGMT_CMDID = 0x852,
- WMI_RF_MGMT_CMDID = 0x853,
- WMI_THERMAL_THROTTLING_CTRL_CMDID = 0x854,
- WMI_THERMAL_THROTTLING_GET_STATUS_CMDID = 0x855,
- WMI_OTP_READ_CMDID = 0x856,
- WMI_OTP_WRITE_CMDID = 0x857,
- WMI_LED_CFG_CMDID = 0x858,
+ WMI_CONNECT_CMDID = 0x01,
+ WMI_DISCONNECT_CMDID = 0x03,
+ WMI_DISCONNECT_STA_CMDID = 0x04,
+ WMI_START_SCAN_CMDID = 0x07,
+ WMI_SET_BSS_FILTER_CMDID = 0x09,
+ WMI_SET_PROBED_SSID_CMDID = 0x0A,
+ WMI_SET_LISTEN_INT_CMDID = 0x0B,
+ WMI_BCON_CTRL_CMDID = 0x0F,
+ WMI_ADD_CIPHER_KEY_CMDID = 0x16,
+ WMI_DELETE_CIPHER_KEY_CMDID = 0x17,
+ WMI_PCP_CONF_CMDID = 0x18,
+ WMI_SET_APPIE_CMDID = 0x3F,
+ WMI_SET_WSC_STATUS_CMDID = 0x41,
+ WMI_PXMT_RANGE_CFG_CMDID = 0x42,
+ WMI_PXMT_SNR2_RANGE_CFG_CMDID = 0x43,
+ WMI_MEM_READ_CMDID = 0x800,
+ WMI_MEM_WR_CMDID = 0x801,
+ WMI_ECHO_CMDID = 0x803,
+ WMI_DEEP_ECHO_CMDID = 0x804,
+ WMI_CONFIG_MAC_CMDID = 0x805,
+ WMI_CONFIG_PHY_DEBUG_CMDID = 0x806,
+ WMI_ADD_DEBUG_TX_PCKT_CMDID = 0x808,
+ WMI_PHY_GET_STATISTICS_CMDID = 0x809,
+ WMI_FS_TUNE_CMDID = 0x80A,
+ WMI_CORR_MEASURE_CMDID = 0x80B,
+ WMI_READ_RSSI_CMDID = 0x80C,
+ WMI_TEMP_SENSE_CMDID = 0x80E,
+ WMI_DC_CALIB_CMDID = 0x80F,
+ WMI_SEND_TONE_CMDID = 0x810,
+ WMI_IQ_TX_CALIB_CMDID = 0x811,
+ WMI_IQ_RX_CALIB_CMDID = 0x812,
+ WMI_SET_UCODE_IDLE_CMDID = 0x813,
+ WMI_SET_WORK_MODE_CMDID = 0x815,
+ WMI_LO_LEAKAGE_CALIB_CMDID = 0x816,
+ WMI_MARLON_R_READ_CMDID = 0x818,
+ WMI_MARLON_R_WRITE_CMDID = 0x819,
+ WMI_MARLON_R_TXRX_SEL_CMDID = 0x81A,
+ MAC_IO_STATIC_PARAMS_CMDID = 0x81B,
+ MAC_IO_DYNAMIC_PARAMS_CMDID = 0x81C,
+ WMI_SILENT_RSSI_CALIB_CMDID = 0x81D,
+ WMI_RF_RX_TEST_CMDID = 0x81E,
+ WMI_CFG_RX_CHAIN_CMDID = 0x820,
+ WMI_VRING_CFG_CMDID = 0x821,
+ WMI_BCAST_VRING_CFG_CMDID = 0x822,
+ WMI_VRING_BA_EN_CMDID = 0x823,
+ WMI_VRING_BA_DIS_CMDID = 0x824,
+ WMI_RCP_ADDBA_RESP_CMDID = 0x825,
+ WMI_RCP_DELBA_CMDID = 0x826,
+ WMI_SET_SSID_CMDID = 0x827,
+ WMI_GET_SSID_CMDID = 0x828,
+ WMI_SET_PCP_CHANNEL_CMDID = 0x829,
+ WMI_GET_PCP_CHANNEL_CMDID = 0x82A,
+ WMI_SW_TX_REQ_CMDID = 0x82B,
+ WMI_READ_MAC_RXQ_CMDID = 0x830,
+ WMI_READ_MAC_TXQ_CMDID = 0x831,
+ WMI_WRITE_MAC_RXQ_CMDID = 0x832,
+ WMI_WRITE_MAC_TXQ_CMDID = 0x833,
+ WMI_WRITE_MAC_XQ_FIELD_CMDID = 0x834,
+ WMI_MLME_PUSH_CMDID = 0x835,
+ WMI_BEAMFORMING_MGMT_CMDID = 0x836,
+ WMI_BF_TXSS_MGMT_CMDID = 0x837,
+ WMI_BF_SM_MGMT_CMDID = 0x838,
+ WMI_BF_RXSS_MGMT_CMDID = 0x839,
+ WMI_BF_TRIG_CMDID = 0x83A,
+ WMI_LINK_MAINTAIN_CFG_WRITE_CMDID = 0x842,
+ WMI_LINK_MAINTAIN_CFG_READ_CMDID = 0x843,
+ WMI_SET_SECTORS_CMDID = 0x849,
+ WMI_MAINTAIN_PAUSE_CMDID = 0x850,
+ WMI_MAINTAIN_RESUME_CMDID = 0x851,
+ WMI_RS_MGMT_CMDID = 0x852,
+ WMI_RF_MGMT_CMDID = 0x853,
+ WMI_THERMAL_THROTTLING_CTRL_CMDID = 0x854,
+ WMI_THERMAL_THROTTLING_GET_STATUS_CMDID = 0x855,
+ WMI_OTP_READ_CMDID = 0x856,
+ WMI_OTP_WRITE_CMDID = 0x857,
+ WMI_LED_CFG_CMDID = 0x858,
/* Performance monitoring commands */
- WMI_BF_CTRL_CMDID = 0x862,
- WMI_NOTIFY_REQ_CMDID = 0x863,
- WMI_GET_STATUS_CMDID = 0x864,
- WMI_GET_RF_STATUS_CMDID = 0x866,
- WMI_GET_BASEBAND_TYPE_CMDID = 0x867,
- WMI_UNIT_TEST_CMDID = 0x900,
- WMI_HICCUP_CMDID = 0x901,
- WMI_FLASH_READ_CMDID = 0x902,
- WMI_FLASH_WRITE_CMDID = 0x903,
+ WMI_BF_CTRL_CMDID = 0x862,
+ WMI_NOTIFY_REQ_CMDID = 0x863,
+ WMI_GET_STATUS_CMDID = 0x864,
+ WMI_GET_RF_STATUS_CMDID = 0x866,
+ WMI_GET_BASEBAND_TYPE_CMDID = 0x867,
+ WMI_UNIT_TEST_CMDID = 0x900,
+ WMI_HICCUP_CMDID = 0x901,
+ WMI_FLASH_READ_CMDID = 0x902,
+ WMI_FLASH_WRITE_CMDID = 0x903,
/* Power management */
- WMI_TRAFFIC_DEFERRAL_CMDID = 0x904,
- WMI_TRAFFIC_RESUME_CMDID = 0x905,
+ WMI_TRAFFIC_DEFERRAL_CMDID = 0x904,
+ WMI_TRAFFIC_RESUME_CMDID = 0x905,
/* P2P */
- WMI_P2P_CFG_CMDID = 0x910,
- WMI_PORT_ALLOCATE_CMDID = 0x911,
- WMI_PORT_DELETE_CMDID = 0x912,
- WMI_POWER_MGMT_CFG_CMDID = 0x913,
- WMI_START_LISTEN_CMDID = 0x914,
- WMI_START_SEARCH_CMDID = 0x915,
- WMI_DISCOVERY_START_CMDID = 0x916,
- WMI_DISCOVERY_STOP_CMDID = 0x917,
- WMI_PCP_START_CMDID = 0x918,
- WMI_PCP_STOP_CMDID = 0x919,
- WMI_GET_PCP_FACTOR_CMDID = 0x91B,
+ WMI_P2P_CFG_CMDID = 0x910,
+ WMI_PORT_ALLOCATE_CMDID = 0x911,
+ WMI_PORT_DELETE_CMDID = 0x912,
+ WMI_POWER_MGMT_CFG_CMDID = 0x913,
+ WMI_START_LISTEN_CMDID = 0x914,
+ WMI_START_SEARCH_CMDID = 0x915,
+ WMI_DISCOVERY_START_CMDID = 0x916,
+ WMI_DISCOVERY_STOP_CMDID = 0x917,
+ WMI_PCP_START_CMDID = 0x918,
+ WMI_PCP_STOP_CMDID = 0x919,
+ WMI_GET_PCP_FACTOR_CMDID = 0x91B,
/* Power Save Configuration Commands */
- WMI_PS_DEV_PROFILE_CFG_CMDID = 0x91C,
+ WMI_PS_DEV_PROFILE_CFG_CMDID = 0x91C,
/* Not supported yet */
- WMI_PS_DEV_CFG_CMDID = 0x91D,
+ WMI_PS_DEV_CFG_CMDID = 0x91D,
/* Not supported yet */
- WMI_PS_DEV_CFG_READ_CMDID = 0x91E,
+ WMI_PS_DEV_CFG_READ_CMDID = 0x91E,
/* Per MAC Power Save Configuration commands
* Not supported yet
*/
- WMI_PS_MID_CFG_CMDID = 0x91F,
+ WMI_PS_MID_CFG_CMDID = 0x91F,
/* Not supported yet */
- WMI_PS_MID_CFG_READ_CMDID = 0x920,
- WMI_RS_CFG_CMDID = 0x921,
- WMI_GET_DETAILED_RS_RES_CMDID = 0x922,
- WMI_AOA_MEAS_CMDID = 0x923,
- WMI_SET_MGMT_RETRY_LIMIT_CMDID = 0x930,
- WMI_GET_MGMT_RETRY_LIMIT_CMDID = 0x931,
- WMI_TOF_SESSION_START_CMDID = 0x991,
- WMI_TOF_GET_CAPABILITIES_CMDID = 0x992,
- WMI_TOF_SET_LCR_CMDID = 0x993,
- WMI_TOF_SET_LCI_CMDID = 0x994,
- WMI_TOF_CHANNEL_INFO_CMDID = 0x995,
- WMI_GET_RF_SECTOR_PARAMS_CMDID = 0x9A0,
- WMI_SET_RF_SECTOR_PARAMS_CMDID = 0x9A1,
- WMI_GET_SELECTED_RF_SECTOR_INDEX_CMDID = 0x9A2,
- WMI_SET_SELECTED_RF_SECTOR_INDEX_CMDID = 0x9A3,
- WMI_SET_RF_SECTOR_ON_CMDID = 0x9A4,
- WMI_SET_MAC_ADDRESS_CMDID = 0xF003,
- WMI_ABORT_SCAN_CMDID = 0xF007,
- WMI_SET_PROMISCUOUS_MODE_CMDID = 0xF041,
- WMI_GET_PMK_CMDID = 0xF048,
- WMI_SET_PASSPHRASE_CMDID = 0xF049,
- WMI_SEND_ASSOC_RES_CMDID = 0xF04A,
- WMI_SET_ASSOC_REQ_RELAY_CMDID = 0xF04B,
- WMI_MAC_ADDR_REQ_CMDID = 0xF04D,
- WMI_FW_VER_CMDID = 0xF04E,
- WMI_PMC_CMDID = 0xF04F,
+ WMI_PS_MID_CFG_READ_CMDID = 0x920,
+ WMI_RS_CFG_CMDID = 0x921,
+ WMI_GET_DETAILED_RS_RES_CMDID = 0x922,
+ WMI_AOA_MEAS_CMDID = 0x923,
+ WMI_SET_MGMT_RETRY_LIMIT_CMDID = 0x930,
+ WMI_GET_MGMT_RETRY_LIMIT_CMDID = 0x931,
+ WMI_TOF_SESSION_START_CMDID = 0x991,
+ WMI_TOF_GET_CAPABILITIES_CMDID = 0x992,
+ WMI_TOF_SET_LCR_CMDID = 0x993,
+ WMI_TOF_SET_LCI_CMDID = 0x994,
+ WMI_TOF_CHANNEL_INFO_CMDID = 0x995,
+ WMI_TOF_SET_TX_RX_OFFSET_CMDID = 0x997,
+ WMI_TOF_GET_TX_RX_OFFSET_CMDID = 0x998,
+ WMI_GET_RF_SECTOR_PARAMS_CMDID = 0x9A0,
+ WMI_SET_RF_SECTOR_PARAMS_CMDID = 0x9A1,
+ WMI_GET_SELECTED_RF_SECTOR_INDEX_CMDID = 0x9A2,
+ WMI_SET_SELECTED_RF_SECTOR_INDEX_CMDID = 0x9A3,
+ WMI_SET_RF_SECTOR_ON_CMDID = 0x9A4,
+ WMI_PRIO_TX_SECTORS_ORDER_CMDID = 0x9A5,
+ WMI_PRIO_TX_SECTORS_NUMBER_CMDID = 0x9A6,
+ WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_CMDID = 0x9A7,
+ WMI_SET_MAC_ADDRESS_CMDID = 0xF003,
+ WMI_ABORT_SCAN_CMDID = 0xF007,
+ WMI_SET_PROMISCUOUS_MODE_CMDID = 0xF041,
+ WMI_GET_PMK_CMDID = 0xF048,
+ WMI_SET_PASSPHRASE_CMDID = 0xF049,
+ WMI_SEND_ASSOC_RES_CMDID = 0xF04A,
+ WMI_SET_ASSOC_REQ_RELAY_CMDID = 0xF04B,
+ WMI_MAC_ADDR_REQ_CMDID = 0xF04D,
+ WMI_FW_VER_CMDID = 0xF04E,
+ WMI_PMC_CMDID = 0xF04F,
};
/* WMI_CONNECT_CMDID */
@@ -959,6 +965,15 @@ struct wmi_tof_channel_info_cmd {
__le32 channel_info_report_request;
} __packed;
+/* WMI_TOF_SET_TX_RX_OFFSET_CMDID */
+struct wmi_tof_set_tx_rx_offset_cmd {
+ /* TX delay offset */
+ __le32 tx_offset;
+ /* RX delay offset */
+ __le32 rx_offset;
+ __le32 reserved[2];
+} __packed;
+
/* WMI Events
* List of Events (target to host)
*/
@@ -1060,11 +1075,16 @@ enum wmi_event_id {
WMI_TOF_SET_LCI_EVENTID = 0x1994,
WMI_TOF_FTM_PER_DEST_RES_EVENTID = 0x1995,
WMI_TOF_CHANNEL_INFO_EVENTID = 0x1996,
+ WMI_TOF_SET_TX_RX_OFFSET_EVENTID = 0x1997,
+ WMI_TOF_GET_TX_RX_OFFSET_EVENTID = 0x1998,
WMI_GET_RF_SECTOR_PARAMS_DONE_EVENTID = 0x19A0,
WMI_SET_RF_SECTOR_PARAMS_DONE_EVENTID = 0x19A1,
WMI_GET_SELECTED_RF_SECTOR_INDEX_DONE_EVENTID = 0x19A2,
WMI_SET_SELECTED_RF_SECTOR_INDEX_DONE_EVENTID = 0x19A3,
WMI_SET_RF_SECTOR_ON_DONE_EVENTID = 0x19A4,
+ WMI_PRIO_TX_SECTORS_ORDER_EVENTID = 0x19A5,
+ WMI_PRIO_TX_SECTORS_NUMBER_EVENTID = 0x19A6,
+ WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID = 0x19A7,
WMI_SET_CHANNEL_EVENTID = 0x9000,
WMI_ASSOC_REQ_EVENTID = 0x9001,
WMI_EAPOL_RX_EVENTID = 0x9002,
@@ -1190,6 +1210,7 @@ enum baseband_type {
BASEBAND_SPARROW_M_B0 = 0x05,
BASEBAND_SPARROW_M_C0 = 0x06,
BASEBAND_SPARROW_M_D0 = 0x07,
+ BASEBAND_TALYN_M_A0 = 0x08,
};
/* WMI_GET_BASEBAND_TYPE_EVENTID */
@@ -2224,6 +2245,25 @@ struct wmi_tof_channel_info_event {
u8 report[0];
} __packed;
+/* WMI_TOF_SET_TX_RX_OFFSET_EVENTID */
+struct wmi_tof_set_tx_rx_offset_event {
+ /* enum wmi_fw_status */
+ u8 status;
+ u8 reserved[3];
+} __packed;
+
+/* WMI_TOF_GET_TX_RX_OFFSET_EVENTID */
+struct wmi_tof_get_tx_rx_offset_event {
+ /* enum wmi_fw_status */
+ u8 status;
+ u8 reserved1[3];
+ /* TX delay offset */
+ __le32 tx_offset;
+ /* RX delay offset */
+ __le32 rx_offset;
+ __le32 reserved2[2];
+} __packed;
+
/* Result status codes for WMI commands */
enum wmi_rf_sector_status {
WMI_RF_SECTOR_STATUS_SUCCESS = 0x00,
@@ -2388,4 +2428,100 @@ struct wmi_set_rf_sector_on_done_event {
u8 reserved[3];
} __packed;
+enum wmi_sector_sweep_type {
+ WMI_SECTOR_SWEEP_TYPE_TXSS = 0x00,
+ WMI_SECTOR_SWEEP_TYPE_BCON = 0x01,
+ WMI_SECTOR_SWEEP_TYPE_TXSS_AND_BCON = 0x02,
+ WMI_SECTOR_SWEEP_TYPE_NUM = 0x03,
+};
+
+/* WMI_PRIO_TX_SECTORS_ORDER_CMDID
+ *
+ * Set the order of TX sectors in TXSS and/or Beacon(AP).
+ *
+ * Returned event:
+ * - WMI_PRIO_TX_SECTORS_ORDER_EVENTID
+ */
+struct wmi_prio_tx_sectors_order_cmd {
+ /* tx sectors order to be applied, 0xFF for end of array */
+ u8 tx_sectors_priority_array[MAX_NUM_OF_SECTORS];
+ /* enum wmi_sector_sweep_type, TXSS and/or Beacon */
+ u8 sector_sweep_type;
+ /* needed only for TXSS configuration */
+ u8 cid;
+ /* alignment to 32b */
+ u8 reserved[2];
+} __packed;
+
+/* completion status codes */
+enum wmi_prio_tx_sectors_cmd_status {
+ WMI_PRIO_TX_SECT_CMD_STATUS_SUCCESS = 0x00,
+ WMI_PRIO_TX_SECT_CMD_STATUS_BAD_PARAM = 0x01,
+ /* other error */
+ WMI_PRIO_TX_SECT_CMD_STATUS_ERROR = 0x02,
+};
+
+/* WMI_PRIO_TX_SECTORS_ORDER_EVENTID */
+struct wmi_prio_tx_sectors_order_event {
+ /* enum wmi_prio_tx_sectors_cmd_status */
+ u8 status;
+ /* alignment to 32b */
+ u8 reserved[3];
+} __packed;
+
+struct wmi_prio_tx_sectors_num_cmd {
+ /* [0-128], 0 = No changes */
+ u8 beacon_number_of_sectors;
+ /* [0-128], 0 = No changes */
+ u8 txss_number_of_sectors;
+ /* [0-8] needed only for TXSS configuration */
+ u8 cid;
+} __packed;
+
+/* WMI_PRIO_TX_SECTORS_NUMBER_CMDID
+ *
+ * Set the number of active sectors in TXSS and/or Beacon.
+ *
+ * Returned event:
+ * - WMI_PRIO_TX_SECTORS_NUMBER_EVENTID
+ */
+struct wmi_prio_tx_sectors_number_cmd {
+ struct wmi_prio_tx_sectors_num_cmd active_sectors_num;
+ /* alignment to 32b */
+ u8 reserved;
+} __packed;
+
+/* WMI_PRIO_TX_SECTORS_NUMBER_EVENTID */
+struct wmi_prio_tx_sectors_number_event {
+ /* enum wmi_prio_tx_sectors_cmd_status */
+ u8 status;
+ /* alignment to 32b */
+ u8 reserved[3];
+} __packed;
+
+/* WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_CMDID
+ *
+ * Set default sectors order and number (hard coded in board file)
+ * in TXSS and/or Beacon.
+ *
+ * Returned event:
+ * - WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID
+ */
+struct wmi_prio_tx_sectors_set_default_cfg_cmd {
+ /* enum wmi_sector_sweep_type, TXSS and/or Beacon */
+ u8 sector_sweep_type;
+ /* needed only for TXSS configuration */
+ u8 cid;
+ /* alignment to 32b */
+ u8 reserved[2];
+} __packed;
+
+/* WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID */
+struct wmi_prio_tx_sectors_set_default_cfg_event {
+ /* enum wmi_prio_tx_sectors_cmd_status */
+ u8 status;
+ /* alignment to 32b */
+ u8 reserved[3];
+} __packed;
+
#endif /* __WILOCITY_WMI_H__ */
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread