* [PATCH] ath10k: Fix Tx legacy rate reporting
@ 2017-01-10 15:53 Mohammed Shafi Shajakhan
2017-01-13 13:35 ` Kalle Valo
0 siblings, 1 reply; 2+ messages in thread
From: Mohammed Shafi Shajakhan @ 2017-01-10 15:53 UTC (permalink / raw)
To: ath10k; +Cc: mohammed, linux-wireless, Mohammed Shafi Shajakhan
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Tx legacy rate is reported 10 fold, as below
iw dev wlan#N station dump | grep "tx bitrate"
tx bitrate: 240.0 MBit/s
This is because by mistake we muliply by the hardware reported
rate twice by 10, fix this.
Fixes: cec17c382140 ("ath10k: add per peer htt tx stats support for 10.4")
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index cb86530..ae10fe1 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2247,7 +2247,7 @@ static inline bool is_valid_legacy_rate(u8 rate)
rate *= 10;
if (rate == 60 && txrate.flags == WMI_RATE_PREAMBLE_CCK)
rate = rate - 5;
- arsta->txrate.legacy = rate * 10;
+ arsta->txrate.legacy = rate;
} else if (txrate.flags == WMI_RATE_PREAMBLE_HT) {
arsta->txrate.flags = RATE_INFO_FLAGS_MCS;
arsta->txrate.mcs = txrate.mcs;
--
1.9.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-01-13 13:36 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-01-10 15:53 [PATCH] ath10k: Fix Tx legacy rate reporting Mohammed Shafi Shajakhan
2017-01-13 13:35 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox