Re: [PATCH ath-next] wifi: ath12k: Rename hw_link_id to radio_idx in ath12k_ah_to_ar()

[Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>]

On 3/31/2026 10:28 AM, Roopni Devanathan wrote:
> ath12k_ah_to_ar() is returning radio from the given hardware based on the
> radio index passed. But, the variable that radio index is received at is
> wrongly named 'hw_link_id', which points to the hardware link index that
> comes from the firmware. This affects readability.
> 
> Resolve this by renaming 'hw_link_id' to 'radio_idx'.
> 
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>
> ---
>   drivers/net/wireless/ath/ath12k/core.h | 10 +++++-----
>   1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
> index 59c193b24764..5eff86827e9c 100644
> --- a/drivers/net/wireless/ath/ath12k/core.h
> +++ b/drivers/net/wireless/ath/ath12k/core.h
> @@ -1366,13 +1366,13 @@ static inline struct ath12k_hw *ath12k_hw_to_ah(struct ieee80211_hw  *hw)
>   	return hw->priv;
>   }
>   
> -static inline struct ath12k *ath12k_ah_to_ar(struct ath12k_hw *ah, u8 hw_link_id)
> +static inline struct ath12k *ath12k_ah_to_ar(struct ath12k_hw *ah, u8 radio_idx)
>   {
> -	if (WARN(hw_link_id >= ah->num_radio,
> -		 "bad hw link id %d, so switch to default link\n", hw_link_id))
> -		hw_link_id = 0;
> +	if (WARN(radio_idx >= ah->num_radio,
> +		 "bad radio index %d, use default radio\n", radio_idx))
> +		radio_idx = 0;
>   
> -	return &ah->radio[hw_link_id];
> +	return &ah->radio[radio_idx];
>   }
>   
>   static inline struct ath12k_hw *ath12k_ar_to_ah(struct ath12k *ar)
> 
> base-commit: 15551ababf6d4e857f2101366a0c3eaa86dd822c

Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>