[PATCH ath-next] wifi: ath12k: Rename hw_link_id to radio_idx in ath12k_ah_to_ar()

[Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>]

ath12k_ah_to_ar() is returning radio from the given hardware based on the
radio index passed. But, the variable that radio index is received at is
wrongly named 'hw_link_id', which points to the hardware link index that
comes from the firmware. This affects readability.

Resolve this by renaming 'hw_link_id' to 'radio_idx'.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1

Signed-off-by: Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>
---
 drivers/net/wireless/ath/ath12k/core.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index 59c193b24764..5eff86827e9c 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -1366,13 +1366,13 @@ static inline struct ath12k_hw *ath12k_hw_to_ah(struct ieee80211_hw  *hw)
 	return hw->priv;
 }
 
-static inline struct ath12k *ath12k_ah_to_ar(struct ath12k_hw *ah, u8 hw_link_id)
+static inline struct ath12k *ath12k_ah_to_ar(struct ath12k_hw *ah, u8 radio_idx)
 {
-	if (WARN(hw_link_id >= ah->num_radio,
-		 "bad hw link id %d, so switch to default link\n", hw_link_id))
-		hw_link_id = 0;
+	if (WARN(radio_idx >= ah->num_radio,
+		 "bad radio index %d, use default radio\n", radio_idx))
+		radio_idx = 0;
 
-	return &ah->radio[hw_link_id];
+	return &ah->radio[radio_idx];
 }
 
 static inline struct ath12k_hw *ath12k_ar_to_ah(struct ath12k *ar)

base-commit: 15551ababf6d4e857f2101366a0c3eaa86dd822c
-- 
2.43.0