[PATCH V2 8/8] brcmfmac: disable command decode in sdio_aos

[Chi-Hsien Lin <Chi-Hsien.Lin@cypress.com>]

From: Wright Feng <wright.feng@cypress.com>

AOS is a part of the SDIOD core that becomes active when the rest of
SDIOD is sleeping to keep SDIO bus alive responding to reduced set of
commands.

Transaction between AOS and SDIOD is not protected, and if cmd 52 is
received in AOS and in the middle of response state changed from AOS to
SDIOD, response is corrupted and it causes to SDIO Host controller to
hang.

Command decode for below chips are disabled in this commit:
 - 4339
 - 4345
 - 4354
 - 4373

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Double Lo <double.lo@cypress.com>
Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index e1708e297d07..e5f487b37c5a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3354,7 +3354,11 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
 
 static bool brcmf_sdio_aos_no_decode(struct brcmf_sdio *bus)
 {
-	if (bus->ci->chip == CY_CC_43012_CHIP_ID)
+	if (bus->ci->chip == CY_CC_43012_CHIP_ID ||
+	    bus->ci->chip == CY_CC_4373_CHIP_ID ||
+	    bus->ci->chip == BRCM_CC_4339_CHIP_ID ||
+	    bus->ci->chip == BRCM_CC_4345_CHIP_ID ||
+	    bus->ci->chip == BRCM_CC_4354_CHIP_ID)
 		return true;
 	else
 		return false;
-- 
2.1.0