* BUG: ifdown doesn't notify cfg80211
@ 2009-07-29 11:10 Holger Schurig
2009-07-29 11:25 ` Holger Schurig
0 siblings, 1 reply; 3+ messages in thread
From: Holger Schurig @ 2009-07-29 11:10 UTC (permalink / raw)
To: linux-wireless
# iw dev eth1 connect -w MNHS key 0:11111
eth1 (phy #0): connected to 00:13:19:80:da:30
# ifconfig eth1 down
# iw dev eth1 connect -w MNHS key 0:11111
# ifconfig eth1 down
# ifconfig eth1 up
# iw dev eth1 connect -w MNHS key 0:11111
command failed: Operation already in progress (-114)
Only when I do "iw dev eth1 disconnect" can I connect again.
Shouldn't downing the interface clear the "I'm connected" state?
--
http://www.holgerschurig.de
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: BUG: ifdown doesn't notify cfg80211
2009-07-29 11:10 BUG: ifdown doesn't notify cfg80211 Holger Schurig
@ 2009-07-29 11:25 ` Holger Schurig
2009-07-29 12:59 ` Holger Schurig
0 siblings, 1 reply; 3+ messages in thread
From: Holger Schurig @ 2009-07-29 11:25 UTC (permalink / raw)
To: linux-wireless
On Wednesday 29 July 2009 13:10:50 Holger Schurig wrote:
> # iw dev eth1 connect -w MNHS key 0:11111
> eth1 (phy #0): connected to 00:13:19:80:da:30
> # ifconfig eth1 down
> # iw dev eth1 connect -w MNHS key 0:11111
> # ifconfig eth1 down
Oops, a copy'n'paste error. I didn't send those two lines twice
at this point. The correct sequence I did:
# iw dev eth1 connect -w MNHS key 0:11111
eth1 (phy #0): connected to 00:13:19:80:da:30
# ifconfig eth1 down
# ifconfig eth1 up
# iw dev eth1 connect -w MNHS key 0:11111
command failed: Operation already in progress (-114)
--
http://www.holgerschurig.de
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: BUG: ifdown doesn't notify cfg80211
2009-07-29 11:25 ` Holger Schurig
@ 2009-07-29 12:59 ` Holger Schurig
0 siblings, 0 replies; 3+ messages in thread
From: Holger Schurig @ 2009-07-29 12:59 UTC (permalink / raw)
To: linux-wireless
> # iw dev eth1 connect -w MNHS key 0:11111
> eth1 (phy #0): connected to 00:13:19:80:da:30
> # ifconfig eth1 down
> # ifconfig eth1 up
> # iw dev eth1 connect -w MNHS key 0:11111
> command failed: Operation already in progress (-114)
As Johannes pointed out on IRC, this happens only if you used
iwconfig eth1 key s:11111
iwconfig eth1 essid MNHS
previously on the device. Seems that the CFG80211-configuration
doesn't delete the WEXT-configuration remnants. And as soon as
you "ifup" the device, it starts associating based on old WEXT
data, resulting in the busy.
--
http://www.holgerschurig.de
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-07-29 13:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-29 11:10 BUG: ifdown doesn't notify cfg80211 Holger Schurig
2009-07-29 11:25 ` Holger Schurig
2009-07-29 12:59 ` Holger Schurig
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox