Linux wireless drivers development
 help / color / mirror / Atom feed
* [PATCH 21/30] ath5k: Update PLL programming for turbo/half/quarter
@ 2010-11-23 19:33 Nick Kossifidis
  0 siblings, 0 replies; only message in thread
From: Nick Kossifidis @ 2010-11-23 19:33 UTC (permalink / raw)
  To: ath5k-devel, linux-wireless; +Cc: linville, me, mcgrof, jirislaby, nbd, br1

 * Set correct PLL settings for each bwmode

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
---
 drivers/net/wireless/ath/ath5k/reset.c |   28 +++++++++++++++++++++++-----
 1 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index ee605cd..ef57bce 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -500,7 +500,6 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah)
 
 /*
  * Bring up MAC + PHY Chips and program PLL
- * TODO: Half/Quarter rate support
  */
 int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 {
@@ -588,7 +587,8 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 				 * CCK headers) operation. We need to test
 				 * this, 5211 might support ofdm-only g after
 				 * all, there are also initial register values
-				 * in the code for g mode (see initvals.c). */
+				 * in the code for g mode (see initvals.c).
+				 */
 				if (ah->ah_version == AR5K_AR5211)
 					mode |= AR5K_PHY_MODE_MOD_OFDM;
 				else
@@ -601,6 +601,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 		} else if (flags & CHANNEL_5GHZ) {
 			mode |= AR5K_PHY_MODE_FREQ_5GHZ;
 
+			/* Different PLL setting for 5413 */
 			if (ah->ah_radio == AR5K_RF5413)
 				clock = AR5K_PHY_PLL_40MHZ_5413;
 			else
@@ -618,12 +619,29 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 			return -EINVAL;
 		}
 
-		if (flags & CHANNEL_TURBO)
-			turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
+		/*XXX: Can bwmode be used with dynamic mode ?
+		 * (I don't think it supports 44MHz) */
+		/* On 2425 initvals TURBO_SHORT is not pressent */
+		if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) {
+			turbo = AR5K_PHY_TURBO_MODE |
+				(ah->ah_radio == AR5K_RF2425) ? 0 :
+				AR5K_PHY_TURBO_SHORT;
+		} else if (ah->ah_bwmode != AR5K_BWMODE_DEFAULT) {
+			if (ah->ah_radio == AR5K_RF5413) {
+				mode |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ?
+					AR5K_PHY_MODE_HALF_RATE :
+					AR5K_PHY_MODE_QUARTER_RATE;
+			} else if (ah->ah_version == AR5K_AR5212) {
+				clock |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ?
+					AR5K_PHY_PLL_HALF_RATE :
+					AR5K_PHY_PLL_QUARTER_RATE;
+			}
+		}
+
 	} else { /* Reset the device */
 
 		/* ...enable Atheros turbo mode if requested */
-		if (flags & CHANNEL_TURBO)
+		if (ah->ah_bwmode == AR5K_BWMODE_40MHZ)
 			ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
 					AR5K_PHY_TURBO);
 	}

^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2010-11-23 19:33 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-23 19:33 [PATCH 21/30] ath5k: Update PLL programming for turbo/half/quarter Nick Kossifidis

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox